[q45] Eaglelake - resolution not properly detected (falls back to -vesa), not supported in Hardy

Bug #362335 reported by Fabián Rodríguez on 2009-04-16
10
This bug affects 2 people
Affects Status Importance Assigned to Milestone
xserver-xorg-video-intel (Ubuntu)
Undecided
Unassigned

Bug Description

Binary package hint: xserver-xorg-video-intel

This is on a Dell Optiplex 760, a rather recently released system.

Hardy fails to detect/support this graphic adapter with the Intel driver.

The graphics adapter properly recognizes supported resolutions of an Elotouch 2639L touchscreen in Jaunty beta, and uses the Intel driver.

In Hardy the Intel driver is not used, and when forcing it X won't start.

Ouput on Hardy:
ubuntu@ubuntu:~$ sudo lspci -s 2.1 -vv -nn
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03)
 Subsystem: Dell Unknown device [1028:027f]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Ouput on Jaunty beta:
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03)
 Subsystem: Dell Device [1028:027f]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

In Bug #218671 (realted to the input part of this screen) it was mentioned the 2.5 backport of the driver is available from xorg-edgers, pehraps that would work:
https://edge.launchpad.net/~xorg-edgers/+archive/ppa/+sourcepub/469034/+listing-archive-extra

Bryce Harrington (bryce) wrote :

Problem is the newer eaglelake chips aren't supported in the old version of -intel included on Hardy. Using an -intel backport is probably the simplest solution:

  https://edge.launchpad.net/~xorg-edgers/+archive/ppa

summary: - Intel integrated Graphics [8086:2e13] resolution not properly
- detected, not supported in Hardy
+ Eaglelake Intel integrated Graphics [8086:2e13] resolution not
+ properly detected (falls back to -vesa), not supported in Hardy

Bryce, when trying to update that driver to your PPA version earlier today I was told I already had the latest xserver-xorg-video-intel.

I'll double check tomorrow.

Bryce Harrington (bryce) wrote :

Hi magicfab,

Please attach the output of `lspci -vvnn`, and attach your /var/log/Xorg.0.log (and maybe Xorg.0.log.old) file from after reproducing this issue. If you've made any customizations to your /etc/X11/xorg.conf please attach that as well.

[This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]

tags: added: needs-xorglog
tags: added: needs-lspci-vvnn
Changed in xserver-xorg-video-intel (Ubuntu):
status: New → Incomplete
Bryce Harrington (bryce) on 2009-04-24
summary: - Eaglelake Intel integrated Graphics [8086:2e13] resolution not
- properly detected (falls back to -vesa), not supported in Hardy
+ [q45] Eaglelake - resolution not properly detected (falls back to
+ -vesa), not supported in Hardy
Bryce Harrington (bryce) on 2009-05-06
tags: added: resolution
Bryce Harrington (bryce) wrote :

We're closing this bug since it is has been some time with no response from the original reporter. However, if the issue still exists please feel free to reopen with the requested information. Also, if you could, please test against the latest development version of Ubuntu, since this confirms the bug is one we may be able to pass upstream for help.

Changed in xserver-xorg-video-intel (Ubuntu):
status: Incomplete → Invalid
Ashwin (cybernytrix) wrote :
Download full text (14.5 KiB)

It does not work for me either. Is there any solution? Thanks!
lspci -vvvn:

00:00.0 0600: 8086:2e10 (rev 03)
        Subsystem: 103c:3048
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:02.0 0300: 8086:2e12 (rev 03) (prog-if 00 [VGA controller])
        Subsystem: 103c:3048
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 1230 [size=8]
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000 Data: 0000
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 0380: 8086:2e13 (rev 03)
 Subsystem: 103c:3048
 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Region 0: Memory at f0400000 (64-bit, non-prefetchable) [disabled] [size=1M]
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:03.0 0780: 8086:2e14 (rev 03)
 Subsystem: 103c:3048
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 5
 Region 0: Memory at f0527100 (64-bit, non-prefetchable) [size=16]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000

00:03.2 0101: 8086:2e16 (rev 03) (prog-if 85 [Master SecO PriO])
 Subsystem: 103c:3048
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin C routed to IRQ 18
 Region 0: I/O ports at 1238 [size=8]
 Region 1: I/O ports at 1260 [size=4]
 Region 2: I/O ports at 1240 [size=8]
 Region 3: I/O ports at 1264 [size=4]
 Region 4: I/O ports at 1220 [size=16]
 Capabilities: [c8] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Que...

To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers