Dumping 155 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20080926'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = true  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.is_powersave_set = true  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.quirk.vbemode_restore = true  (bool)
  power_management.type = 'acpi'  (string)
  system.board.product = '0RX493'  (string)
  system.board.serial = '.9LSD54J.CN129618CP6090.'  (string)
  system.board.vendor = 'Dell Inc.'  (string)
  system.board.version = ''  (string)
  system.chassis.manufacturer = 'Dell Inc.'  (string)
  system.chassis.type = 'Portable'  (string)
  system.firmware.release_date = '12/17/2008'  (string)
  system.firmware.vendor = 'Dell Inc.'  (string)
  system.firmware.version = 'A11'  (string)
  system.formfactor = 'laptop'  (string)
  system.hardware.primary_video.product = 10818  (0x2a42)  (int)
  system.hardware.primary_video.vendor = 32902  (0x8086)  (int)
  system.hardware.product = 'Latitude E6400'  (string)
  system.hardware.serial = '9LSD54J'  (string)
  system.hardware.uuid = '44454C4C-4C00-1053-8044-B9C04F35344A'  (string)
  system.hardware.vendor = 'Dell Inc.'  (string)
  system.hardware.version = ''  (string)
  system.kernel.machine = 'i686'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.28-6-generic'  (string)

udi = '/org/freedesktop/Hal/devices/net_c6_31_0f_35_88_88'
  info.capabilities = {'net', 'net.bridge'} (string list)
  info.category = 'net.bridge'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Bridge Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_c6_31_0f_35_88_88'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/pan0'  (string)
  net.address = 'c6:31:0f:35:88:88'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.bridge.mac_address = 217914010863752  (0xc6310f358888)  (uint64)
  net.interface = 'pan0'  (string)
  net.linux.ifindex = 5  (0x5)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Video Bus'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event9'  (string)
  input.product = 'Video Bus'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'it'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event9'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:43/input/input9/event9'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Video Bus'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.product = 'Video Bus'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'it'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
  button.has_state = true  (bool)
  button.state.value = false  (bool)
  button.type = 'lid'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'input.switch', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Lid Switch'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Lid Switch'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/snd/timer'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  access_control.file = '/dev/sequencer2'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'  (string)
  linux.device_file = '/dev/sequencer2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2'  (string)
  oss.device_file = '/dev/sequencer2'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  access_control.file = '/dev/sequencer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'  (string)
  linux.device_file = '/dev/sequencer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer'  (string)
  oss.device_file = '/dev/sequencer'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  access_control.file = '/dev/snd/seq'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/seq'  (string)
  alsa.type = 'sequencer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
  linux.device_file = '/dev/snd/seq'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/seq'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
  access_control.file = '/dev/input/event3'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU0'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU1'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.capabilities = {'net', 'net.loopback'} (string list)
  info.category = 'net.loopback'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Loopback device Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
  net.address = '00:00:00:00:00:00'  (string)
  net.arp_proto_hw_id = 772  (0x304)  (int)
  net.interface = 'lo'  (string)
  net.linux.ifindex = 1  (0x1)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_backlight'
  info.addons = {'hald-addon-generic-backlight'} (string list)
  info.capabilities = {'laptop_panel'} (string list)
  info.category = 'laptop_panel'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Generic Backlight Device'  (string)
  info.subsystem = 'backlight'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_backlight'  (string)
  laptop_panel.access_method = 'general'  (string)
  laptop_panel.brightness_in_hardware = false  (bool)
  laptop_panel.num_levels = 16  (0x10)  (int)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'backlight'  (string)
  linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  button.has_state = false  (bool)
  button.type = 'sleep'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Sleep Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'  (string)
  input.device = '/dev/input/event2'  (string)
  input.product = 'Sleep Button (CM)'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event1'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0'
  battery.charge_level.current = 50982  (0xc726)  (int)
  battery.charge_level.design = 57720  (0xe178)  (int)
  battery.charge_level.last_full = 55944  (0xda88)  (int)
  battery.charge_level.percentage = 91  (0x5b)  (int)
  battery.charge_level.rate = 15839  (0x3ddf)  (int)
  battery.is_rechargeable = true  (bool)
  battery.model = 'DELL PT4368B'  (string)
  battery.present = true  (bool)
  battery.rechargeable.is_charging = false  (bool)
  battery.rechargeable.is_discharging = true  (bool)
  battery.remaining_time = 11587  (0x2d43)  (int)
  battery.reporting.current = 4593  (0x11f1)  (int)
  battery.reporting.design = 5200  (0x1450)  (int)
  battery.reporting.last_full = 5040  (0x13b0)  (int)
  battery.reporting.rate = 1427  (0x593)  (int)
  battery.reporting.technology = 'Li-ion'  (string)
  battery.reporting.unit = 'mAh'  (string)
  battery.serial = '35214'  (string)
  battery.technology = 'lithium-ion'  (string)
  battery.type = 'primary'  (string)
  battery.vendor = 'Samsung SDI'  (string)
  battery.voltage.current = 12018  (0x2ef2)  (int)
  battery.voltage.design = 11100  (0x2b5c)  (int)
  battery.voltage.unit = 'mV'  (string)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'DELL PT4368B'  (string)
  info.subsystem = 'power_supply'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'
  ac_adapter.present = false  (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Generic AC Adapter Device'  (string)
  info.subsystem = 'power_supply'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/AC'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_3'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0d'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0c'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1'
  access_control.file = '/dev/ttyS1'  (string)
  access_control.type = 'modem'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'serial', 'access_control'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1'  (string)
  linux.device_file = '/dev/ttyS1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09/tty/ttyS1'  (string)
  serial.device = '/dev/ttyS1'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  serial.port = 1  (0x1)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0103)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.id = 'PNP0103'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT-style speaker sound'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.linux.driver = 'rtc_cmos'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PS/2 Port for PS/2-style Mice'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'PS/2 Port for PS/2-style Mice'  (string)
  pnp.id = 'PNP0f13'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PCI Bus'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.description = 'PCI Bus'  (string)
  pnp.id = 'PNP0a03'  (string)

udi = '/org/freedesktop/Hal/devices/platform_vboxdrv_0'
  info.linux.driver = 'vboxdrv'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (vboxdrv.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_vboxdrv_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/vboxdrv.0'  (string)
  platform.id = 'vboxdrv.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (regulatory.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/regulatory.0'  (string)
  platform.id = 'regulatory.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.linux.driver = 'pcspkr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  info.product = 'PC Speaker'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
  input.device = '/dev/input/event7'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.product = 'PC Speaker'  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input7/event7'  (string)

udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
  info.linux.driver = 'iTCO_wdt'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (iTCO_wdt)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/iTCO_wdt'  (string)
  platform.id = 'iTCO_wdt'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  info.linux.driver = 'psmouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0'
  access_control.file = '/dev/input/event13'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'input.touchpad', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  info.product = 'AlpsPS/2 ALPS DualPoint TouchPad'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0'  (string)
  input.device = '/dev/input/event13'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  input.product = 'AlpsPS/2 ALPS DualPoint TouchPad'  (string)
  input.x11_driver = 'synaptics'  (string)
  input.x11_options.AccelFactor = '0.02'  (string)
  input.x11_options.ClickTime = '0'  (string)
  input.x11_options.FingerHigh = '16'  (string)
  input.x11_options.MaxSpeed = '0.75'  (string)
  input.x11_options.MinSpeed = '0.45'  (string)
  input.x11_options.RightEdge = '830'  (string)
  input.x11_options.SingleTapTimeout = '0'  (string)
  linux.device_file = '/dev/input/event13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input13/event13'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
  access_control.file = '/dev/input/event12'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  info.product = 'DualPoint Stick'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'  (string)
  input.device = '/dev/input/event12'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  input.product = 'DualPoint Stick'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event12'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input12/event12'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.linux.driver = 'atkbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  info.product = 'AT Translated Set 2 keyboard'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'  (string)
  input.device = '/dev/input/event4'  (string)
  input.keymap.data = {'e001:playpause', 'e002:stopcd', 'e003:previoussong', 'e004:nextsong', 'e005:brightnessdown', 'e006:brightnessup', 'e007:battery', 'e008:wlan', 'e009:ejectclosecd', 'e00a:suspend', 'e00b:displaytoggle', 'e00f:switchvideomode', 'e010:previoussong', 'e011:prog1', 'e012:media', 'e013:f23', 'e015:camera', 'e00c:f23', 'e019:nextsong', 'e01b:switchvideomode', 'e022:playpause', 'e024:stopcd', 'e06d:media'} (string list)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.product = 'AT Translated Set 2 keyboard'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'it'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (eisa.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/eisa.0'  (string)
  platform.id = 'eisa.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_dcdbas'
  info.linux.driver = 'dcdbas'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (dcdbas)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/dcdbas'  (string)
  platform.id = 'dcdbas'  (string)

udi = '/org/freedesktop/Hal/devices/dell_lcd_panel'
  info.addons = {'hald-addon-dell-backlight'} (string list)
  info.capabilities = {'laptop_panel'} (string list)
  info.category = 'laptop_panel'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell Laptop Panel'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_lcd_panel'  (string)
  laptop_panel.access_method = 'custom'  (string)
  laptop_panel.brightness_in_hardware = true  (bool)
  laptop_panel.num_levels = 16  (0x10)  (int)

udi = '/org/freedesktop/Hal/devices/dell_wwan_switch'
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell WWAN Switch'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_wwan_switch'  (string)
  killswitch.access_method = 'dell'  (string)
  killswitch.type = 'wwan'  (string)
  org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)

udi = '/org/freedesktop/Hal/devices/dell_wlan_switch'
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell WLAN Switch'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_wlan_switch'  (string)
  killswitch.access_method = 'dell'  (string)
  killswitch.type = 'wlan'  (string)
  org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)

udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch'
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_dcdbas'  (string)
  info.product = 'Dell Bluetooth Switch'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/dell_bluetooth_switch'  (string)
  killswitch.access_method = 'dell'  (string)
  killswitch.type = 'bluetooth'  (string)
  org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
  org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)

udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (Fixed MDIO bus.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0'  (string)
  platform.id = 'Fixed MDIO bus.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2930'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2930'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.product = '82801I (ICH9 Family) SMBus Controller'  (string)
  pci.product_id = 10544  (0x2930)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a'
  info.linux.driver = 'ahci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 82801 SATA RAID Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.product = 'Mobile 82801 SATA RAID Controller'  (string)
  pci.product_id = 10282  (0x282a)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_4'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host5/scsi_host/host5'  (string)
  scsi_host.host = 5  (0x5)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_3'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host4/scsi_host/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_2'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host3/scsi_host/host3'  (string)
  scsi_host.host = 3  (0x3)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_1'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/scsi_host/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_device_lun0'
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 1  (0x1)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVD+-RW TS-U633A'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'TSSTcorp'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_U633A'
  access_control.file = '/dev/sr0'  (string)
  access_control.type = 'cdrom'  (string)
  block.device = '/dev/sr0'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_U633A'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_device_lun0'  (string)
  info.product = 'DVD+-RW TS-U633A'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_TS_U633A'  (string)
  info.vendor = 'TSSTcorp'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = true  (bool)
  storage.cdrom.dvdrdl = true  (bool)
  storage.cdrom.dvdrw = true  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 4234  (0x108a)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 0  (0x0)  (int)
  storage.cdrom.write_speeds = {} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = 'D200'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DVD+-RW TS-U633A'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'TSSTcorp'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_device_lun0_scsi_generic'
  access_control.file = '/dev/sg1'  (string)
  access_control.type = 'cdrom'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'scsi_generic', 'access_control'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_0_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/scsi_generic/sg1'  (string)
  scsi_generic.device = '/dev/sg1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'ST9160411ASG'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'
  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_device_lun0'  (string)
  info.product = 'ST9160411ASG'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda'  (string)
  storage.automount_enabled_hint = false  (bool)
  storage.bus = 'pci'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = 'DE16'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'ST9160411ASG'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 160041885696  (0x25433d6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'SATA_ST9160411ASG_5TG0KSXD'  (string)
  storage.size = 160041885696  (0x25433d6000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024'
  block.device = '/dev/sda4'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 4  (0x4)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2  (0x2)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 4  (0x4)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 146804797440  (0x222e3f7000)  (uint64)
  volume.partition.type = '0x05'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 1024  (0x400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_44e24881_d2e7_42ad_8b12_fab3cdaf9405'
  block.device = '/dev/sda6'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 6  (0x6)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_44e24881_d2e7_42ad_8b12_fab3cdaf9405'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 9478287  (0x90a08f)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 6  (0x6)  (int)
  volume.partition.start = 155186390016  (0x2421d46400)  (uint64)
  volume.size = 4852882944  (0x121411e00)  (uint64)
  volume.uuid = '44e24881-d2e7-42ad-8b12-fab3cdaf9405'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_099e814f_7147_4d02_a695_faa9e95f3708'
  block.device = '/dev/sda5'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_099e814f_7147_4d02_a695_faa9e95f3708'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 16370172  (0xf9c9fc)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.start = 146804829696  (0x222e3fee00)  (uint64)
  volume.size = 8381528064  (0x1f393f800)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '099e814f-7147-4d02-a695-faa9e95f3708'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_DE4E05854E055823'
  block.device = '/dev/sda3'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 3  (0x3)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.product = 'Dati'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_DE4E05854E055823'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ntfs-3g'  (string)
  volume.fstype.alternative = 'ntfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '3.1'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'Dati'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
  volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = '/media/Dati'  (string)
  volume.num_blocks = 204806072  (0xc3517b8)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 3  (0x3)  (int)
  volume.partition.start = 41944088576  (0x9c4100000)  (uint64)
  volume.policy.mount_filesystem = 'ntfs-3g'  (string)
  volume.size = 104860708864  (0x186a2f7000)  (uint64)
  volume.unmount.ntfs.valid_options = {'lazy'} (string list)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'DE4E05854E055823'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_5333CD4E2758CEE1'
  block.device = '/dev/sda2'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.product = 'RESTORE'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_5333CD4E2758CEE1'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ntfs-3g'  (string)
  volume.fstype.alternative = 'ntfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '3.1'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'RESTORE'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
  volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 10240018  (0x9c4012)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.start = 36701199360  (0x88b8fdc00)  (uint64)
  volume.policy.mount_filesystem = 'ntfs-3g'  (string)
  volume.size = 5242889216  (0x138802400)  (uint64)
  volume.unmount.ntfs.valid_options = {'lazy'} (string list)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '5333CD4E2758CEE1'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_1EEECF64EECF32B7'
  block.device = '/dev/sda1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160411ASG_5TG0KSXD'  (string)
  info.product = 'Vista'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1EEECF64EECF32B7'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ntfs-3g'  (string)
  volume.fstype.alternative = 'ntfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '3.1'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'Vista'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
  volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 71681967  (0x445c7af)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.policy.mount_filesystem = 'ntfs-3g'  (string)
  volume.size = 36701167104  (0x88b8f5e00)  (uint64)
  volume.unmount.ntfs.valid_options = {'lazy'} (string list)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '1EEECF64EECF32B7'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_282a_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2917'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ICH9M-E LPC Interface Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2917'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.product = 'ICH9M-E LPC Interface Controller'  (string)
  pci.product_id = 10519  (0x2917)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801 Mobile PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.product = '82801 Mobile PCI Bridge'  (string)
  pci.product_id = 9288  (0x2448)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_843'
  info.linux.driver = 'ricoh-mmc'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C843 MMC Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_843'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.3'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.3'  (string)
  pci.product = 'R5C843 MMC Host Controller'  (string)
  pci.product_id = 2115  (0x843)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822'
  info.linux.driver = 'sdhci-pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.2'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.2'  (string)
  pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  pci.product_id = 2082  (0x822)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'
  info.capabilities = {'mmc_host'} (string list)
  info.category = 'mmc_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.product = 'MMC/SD Host Adapter'  (string)
  info.subsystem = 'mmc_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'mmc_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.2/mmc_host/mmc0'  (string)
  mmc_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_832'
  info.linux.driver = 'ohci1394'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C832 IEEE 1394 Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_832'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.1'  (string)
  pci.product = 'R5C832 IEEE 1394 Controller'  (string)
  pci.product_id = 2098  (0x832)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_476'
  info.linux.driver = 'yenta_cardbus'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'RL5c476 II'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_476'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 7  (0x7)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0'  (string)
  pci.product = 'RL5c476 II'  (string)
  pci.product_id = 1142  (0x476)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_293a'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB2 EHCI Controller #1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293a'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.product = '82801I (ICH9 Family) USB2 EHCI Controller #1'  (string)
  pci.product_id = 10554  (0x293a)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293a'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4'  (string)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 6  (0x6)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:1d.7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-0:1.0'  (string)
  usb.bus_number = 4  (0x4)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 6  (0x6)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:1d.7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2936'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #3'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2936'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #3'  (string)
  pci.product_id = 10550  (0x2936)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2936'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/008/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8'  (string)
  usb_device.bus_number = 8  (0x8)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.2'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0'  (string)
  usb.bus_number = 8  (0x8)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.2'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2935'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2935'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #2'  (string)
  pci.product_id = 10549  (0x2935)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2935'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/007/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7'  (string)
  usb_device.bus_number = 7  (0x7)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0'  (string)
  usb.bus_number = 7  (0x7)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2934'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2934'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #1'  (string)
  pci.product_id = 10548  (0x2934)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2934'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/006/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6'  (string)
  usb_device.bus_number = 6  (0x6)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0'  (string)
  usb.bus_number = 6  (0x6)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2944'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) PCI Express Port 3'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2944'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2'  (string)
  pci.product = '82801I (ICH9 Family) PCI Express Port 3'  (string)
  pci.product_id = 10564  (0x2944)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2942'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) PCI Express Port 2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2942'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'  (string)
  pci.product = '82801I (ICH9 Family) PCI Express Port 2'  (string)
  pci.product_id = 10562  (0x2942)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_4232'
  info.linux.driver = 'iwlagn'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2942'  (string)
  info.product = 'Wireless WiFi Link 5100'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0'  (string)
  pci.product = 'Wireless WiFi Link 5100'  (string)
  pci.product_id = 16946  (0x4232)  (int)
  pci.subsys_product_id = 4897  (0x1321)  (int)
  pci.subsys_vendor = 'Intel Corporation'  (string)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_2'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_2'  (string)
  leds.colour = 'TX'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/leds/iwl-phy0:TX'  (string)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_1'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_1'  (string)
  leds.colour = 'RX'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/leds/iwl-phy0:RX'  (string)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_0'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0_0'  (string)
  leds.colour = 'assoc'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/leds/iwl-phy0:assoc'  (string)

udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_iwl_phy0'  (string)
  leds.colour = 'radio'  (string)
  leds.device_name = 'iwl-phy0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/leds/iwl-phy0:radio'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_4232_rfkill_5100AGN_wlan'
  info.addons.singleton = {'hald-addon-rfkill-killswitch'} (string list)
  info.capabilities = {'killswitch'} (string list)
  info.category = 'killswitch'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.product = '5100AGN wlan Killswitch'  (string)
  info.subsystem = 'rfkill'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_4232_rfkill_5100AGN_wlan'  (string)
  info.vendor = 'Intel Corporation'  (string)
  killswitch.access_method = 'rfkill'  (string)
  killswitch.name = '5100AGN'  (string)
  killswitch.state = 1  (0x1)  (int)
  killswitch.type = 'wlan'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'rfkill'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/rfkill/rfkill0'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_21_5d_e9_83_a6_0'
  info.capabilities = {'net', 'net.80211control'} (string list)
  info.category = 'net.80211control'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.product = 'Networking Wireless Control Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_21_5d_e9_83_a6_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wmaster0'  (string)
  net.address = '00:21:5d:e9:83:a6'  (string)
  net.arp_proto_hw_id = 801  (0x321)  (int)
  net.interface = 'wmaster0'  (string)
  net.linux.ifindex = 3  (0x3)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_21_5d_e9_83_a6'
  info.capabilities = {'net', 'net.80211'} (string list)
  info.category = 'net.80211'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)
  info.product = 'WLAN Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_21_5d_e9_83_a6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/net/wlan0'  (string)
  net.80211.mac_address = 143309505446  (0x215de983a6)  (uint64)
  net.address = '00:21:5d:e9:83:a6'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'wlan0'  (string)
  net.linux.ifindex = 4  (0x4)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4232'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2940'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) PCI Express Port 1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2940'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.product = '82801I (ICH9 Family) PCI Express Port 1'  (string)
  pci.product_id = 10560  (0x2940)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e'
  info.linux.driver = 'HDA Intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) HD Audio Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'  (string)
  pci.product = '82801I (ICH9 Family) HD Audio Controller'  (string)
  pci.product_id = 10558  (0x293e)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  info.product = 'HDA Intel Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0'  (string)
  sound.card = 0  (0x0)  (int)
  sound.card_id = 'HDA Intel'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_1'
  access_control.file = '/dev/snd/pcmC0D1p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.device_file = '/dev/snd/pcmC0D1p'  (string)
  alsa.device_id = 'STAC92xx Digital'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Digital ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_0'
  access_control.file = '/dev/snd/pcmC0D0p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  alsa.device_id = 'STAC92xx Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_capture_0'
  access_control.file = '/dev/snd/pcmC0D0c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  alsa.device_id = 'STAC92xx Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device_file = '/dev/mixer'  (string)
  oss.device_id = 'STAC92xx Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0_0'
  access_control.file = '/dev/dsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp'  (string)
  oss.device_id = 'STAC92xx Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC0'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA Intel'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'HDA Intel ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0'
  access_control.file = '/dev/audio'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio'  (string)
  oss.device_id = 'STAC92xx Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_1'
  access_control.file = '/dev/adsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  info.product = 'STAC92xx Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_oss_pcm_1'  (string)
  linux.device_file = '/dev/adsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/adsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA Intel'  (string)
  oss.device = 1  (0x1)  (int)
  oss.device_file = '/dev/adsp'  (string)
  oss.device_id = 'STAC92xx Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293e_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  info.product = 'HDA Digital PCBeep'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293e_logicaldev_input'  (string)
  input.device = '/dev/input/event11'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/pci_8086_293e'  (string)
  input.product = 'HDA Digital PCBeep'  (string)
  linux.device_file = '/dev/input/event11'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/input/input11/event11'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_293c'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB2 EHCI Controller #2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_293c'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7'  (string)
  pci.product = '82801I (ICH9 Family) USB2 EHCI Controller #2'  (string)
  pci.product_id = 10556  (0x293c)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_293c'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 6  (0x6)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:1a.7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'  (string)
  info.product = 'Laptop_Integrated_Webcam_0.3M'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial'  (string)
  info.vendor = 'Microdia'  (string)
  linux.device_file = '/dev/bus/usb/002/004'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 239  (0xef)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 34822  (0x8806)  (int)
  usb_device.device_subclass = 2  (0x2)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 4  (0x4)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6'  (string)
  usb_device.max_power = 500  (0x1f4)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 2  (0x2)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Laptop_Integrated_Webcam_0.3M'  (string)
  usb_device.product_id = 25592  (0x63f8)  (int)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Microdia'  (string)
  usb_device.vendor_id = 3141  (0xc45)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if1'
  info.linux.driver = 'uvcvideo'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial'  (string)
  info.product = 'USB Video Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6/2-6:1.1'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 239  (0xef)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 34822  (0x8806)  (int)
  usb.device_subclass = 2  (0x2)  (int)
  usb.interface.class = 14  (0xe)  (int)
  usb.interface.number = 1  (0x1)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 2  (0x2)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6/2-6:1.1'  (string)
  usb.max_power = 500  (0x1f4)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Video Interface'  (string)
  usb.product_id = 25592  (0x63f8)  (int)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Microdia'  (string)
  usb.vendor_id = 3141  (0xc45)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0'
  info.linux.driver = 'uvcvideo'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial'  (string)
  info.product = 'USB Video Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6/2-6:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 239  (0xef)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 34822  (0x8806)  (int)
  usb.device_subclass = 2  (0x2)  (int)
  usb.interface.class = 14  (0xe)  (int)
  usb.interface.description = 'Integrated Webcam'  (string)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6/2-6:1.0'  (string)
  usb.max_power = 500  (0x1f4)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Video Interface'  (string)
  usb.product_id = 25592  (0x63f8)  (int)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Microdia'  (string)
  usb.vendor_id = 3141  (0xc45)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0_video4linux'
  access_control.file = '/dev/video0'  (string)
  access_control.type = 'video4linux'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list)
  info.category = 'video4linux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0'  (string)
  info.product = 'Laptop_Integrated_Webcam_0.3M'  (string)
  info.subsystem = 'video4linux'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0_video4linux'  (string)
  linux.device_file = '/dev/video0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'video4linux'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6/2-6:1.0/video4linux/video0'  (string)
  video4linux.device = '/dev/video0'  (string)
  video4linux.version = '2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0_logicaldev_input'
  button.has_state = false  (bool)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0'  (string)
  info.product = 'Laptop_Integrated_Webcam_0.3M'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event10'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_c45_63f8_noserial_if0'  (string)
  input.product = 'Laptop_Integrated_Webcam_0.3M'  (string)
  linux.device_file = '/dev/input/event10'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-6/2-6:1.0/input/input10/event10'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 6  (0x6)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:1a.7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2939'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #6'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2939'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #6'  (string)
  pci.product_id = 10553  (0x2939)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2939'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/005/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5'  (string)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1a.2'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'  (string)
  info.product = '5880'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD'  (string)
  info.vendor = 'Broadcom Corp.'  (string)
  linux.device_file = '/dev/bus/usb/005/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1'  (string)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration_value = 0  (0x0)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 257  (0x101)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 2  (0x2)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = '5880'  (string)
  usb_device.product_id = 22529  (0x5801)  (int)
  usb_device.serial = '0123456789ABCD'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Broadcom Corp.'  (string)
  usb_device.vendor_id = 2652  (0xa5c)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD_if1'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD'  (string)
  info.product = 'USB Chip/Smartcard Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD_if1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:0.1'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 0  (0x0)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 257  (0x101)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 11  (0xb)  (int)
  usb.interface.description = 'Contacted SmartCard'  (string)
  usb.interface.number = 1  (0x1)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:0.1'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Chip/Smartcard Interface'  (string)
  usb.product_id = 22529  (0x5801)  (int)
  usb.serial = '0123456789ABCD'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Broadcom Corp.'  (string)
  usb.vendor_id = 2652  (0xa5c)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD_if0'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD'  (string)
  info.product = 'USB Application Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_5801_0123456789ABCD_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:0.0'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 0  (0x0)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 257  (0x101)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 254  (0xfe)  (int)
  usb.interface.description = 'Broadcom USH w/swipe sensor'  (string)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:0.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Application Specific Interface'  (string)
  usb.product_id = 22529  (0x5801)  (int)
  usb.serial = '0123456789ABCD'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Broadcom Corp.'  (string)
  usb.vendor_id = 2652  (0xa5c)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1a.2'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2938'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #5'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2938'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #5'  (string)
  pci.product_id = 10552  (0x2938)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2938'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1a.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1a.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2937'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801I (ICH9 Family) USB UHCI Controller #4'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2937'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0'  (string)
  pci.product = '82801I (ICH9 Family) USB UHCI Controller #4'  (string)
  pci.product_id = 10551  (0x2937)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2937'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1a.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'  (string)
  info.product = 'BCM2046B1'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.vendor = 'Broadcom Corp.'  (string)
  linux.device_file = '/dev/bus/usb/001/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1'  (string)
  usb_device.max_power = 94  (0x5e)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 3  (0x3)  (int)
  usb_device.product = 'BCM2046B1'  (string)
  usb_device.product_id = 17664  (0x4500)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Broadcom Corp.'  (string)
  usb_device.vendor_id = 2652  (0xa5c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'Dell Wireless 370 Bluetooth Mini-card'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.vendor = 'Dell Computer Corp.'  (string)
  linux.device_file = '/dev/bus/usb/001/005'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 224  (0xe0)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 1110  (0x456)  (int)
  usb_device.device_subclass = 1  (0x1)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 5  (0x5)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 4  (0x4)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Dell Wireless 370 Bluetooth Mini-card'  (string)
  usb_device.product_id = 33110  (0x8156)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Dell Computer Corp.'  (string)
  usb_device.vendor_id = 16700  (0x413c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if1'
  info.linux.driver = 'btusb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Wireless Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 1110  (0x456)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 224  (0xe0)  (int)
  usb.interface.number = 1  (0x1)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 4  (0x4)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Wireless Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'
  info.linux.driver = 'btusb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Wireless Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 1110  (0x456)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 224  (0xe0)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 4  (0x4)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Wireless Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0_bluetooth_hci_0'
  bluetooth_hci.address = 0  (0x0)  (uint64)
  bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'  (string)
  info.capabilities = {'bluetooth_hci'} (string list)
  info.category = 'bluetooth_hci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0'  (string)
  info.product = 'Bluetooth Host Controller Interface'  (string)
  info.subsystem = 'bluetooth'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if0_bluetooth_hci_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'bluetooth'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/bluetooth/hci0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if2'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Vendor Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 1110  (0x456)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 255  (0xff)  (int)
  usb.interface.number = 2  (0x2)  (int)
  usb.interface.protocol = 255  (0xff)  (int)
  usb.interface.subclass = 255  (0xff)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 4  (0x4)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Vendor Specific Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if3'
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial'  (string)
  info.product = 'USB Application Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8156_noserial_if3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.3'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 224  (0xe0)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 1110  (0x456)  (int)
  usb.device_subclass = 1  (0x1)  (int)
  usb.interface.class = 254  (0xfe)  (int)
  usb.interface.number = 3  (0x3)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.3'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 4  (0x4)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Application Specific Interface'  (string)
  usb.product_id = 33110  (0x8156)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0'  (string)
  usb.max_power = 94  (0x5e)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 3  (0x3)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 17664  (0x4500)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Broadcom Corp.'  (string)
  usb.vendor_id = 2652  (0xa5c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'Unknown (0x8158)'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial'  (string)
  info.vendor = 'Dell Computer Corp.'  (string)
  linux.device_file = '/dev/bus/usb/001/004'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 4  (0x4)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2'  (string)
  usb_device.max_power = 2  (0x2)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product_id = 33112  (0x8158)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Dell Computer Corp.'  (string)
  usb_device.vendor_id = 16700  (0x413c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial_if0'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8158_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 2  (0x2)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0'  (string)
  usb.max_power = 2  (0x2)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 33112  (0x8158)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial'  (string)
  info.product = 'Unknown (0x8157)'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial'  (string)
  info.vendor = 'Dell Computer Corp.'  (string)
  linux.device_file = '/dev/bus/usb/001/003'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 3  (0x3)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1'  (string)
  usb_device.max_power = 2  (0x2)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product_id = 33111  (0x8157)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Dell Computer Corp.'  (string)
  usb_device.vendor_id = 16700  (0x413c)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 3  (0x3)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0'  (string)
  usb.max_power = 2  (0x2)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 33111  (0x8157)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Dell Computer Corp.'  (string)
  usb.vendor_id = 16700  (0x413c)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'  (string)
  info.product = 'HID 413c:8157'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event5'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0'  (string)
  input.product = 'HID 413c:8157'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'it'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1a.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_10f5'
  info.linux.driver = 'e1000e'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82567LM Gigabit Network Connection'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_10f5'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0'  (string)
  pci.product = '82567LM Gigabit Network Connection'  (string)
  pci.product_id = 4341  (0x10f5)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_21_70_db_f5_3d'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_10f5'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_21_70_db_f5_3d'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0/net/eth0'  (string)
  net.80203.mac_address = 143627384125  (0x2170dbf53d)  (uint64)
  net.address = '00:21:70:db:f5:3d'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_10f5'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_8086_2a43'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 4 Series Chipset Integrated Graphics Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a43'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  pci.product = 'Mobile 4 Series Chipset Integrated Graphics Controller'  (string)
  pci.product_id = 10819  (0x2a43)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2a42'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 4 Series Chipset Integrated Graphics Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a42'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.product = 'Mobile 4 Series Chipset Integrated Graphics Controller'  (string)
  pci.product_id = 10818  (0x2a42)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2a42_drm_i915_card0'
  access_control.file = '/dev/dri/card0'  (string)
  access_control.type = 'video'  (string)
  drm.dri_library = 'i915'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'drm', 'access_control'} (string list)
  info.category = 'drm'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a42'  (string)
  info.product = 'Direct Rendering Manager Device'  (string)
  info.subsystem = 'drm'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a42_drm_i915_card0'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.device_file = '/dev/dri/card0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'drm'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2a40'
  info.linux.driver = 'agpgart-intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 4 Series Chipset Memory Controller Hub'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a40'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = 'Mobile 4 Series Chipset Memory Controller Hub'  (string)
  pci.product_id = 10816  (0x2a40)  (int)
  pci.subsys_product_id = 563  (0x233)  (int)
  pci.subsys_vendor = 'Dell'  (string)
  pci.subsys_vendor_id = 4136  (0x1028)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'  (string)
  access_control.type = 'camera'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a40'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fuse'  (string)


Dumped 155 device(s) from the Global Device List.
------------------------------------------------