[ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=3f2f5445-3b08-4786-b00a-1d79abd0f707 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c70fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c70fb000-0x00000000c75fafff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000c75fb000-0x00000000c7c7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c7eff000-0x00000000c7efffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004317fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by HP [ 0.000000] efi: ACPI=0xc7efe000 ACPI 2.0=0xc7efe014 SMBIOS=0xc78db000 MPS=0xc793b000 ESRT=0xc6fdf660 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP HP EliteBook 820 G3/807C, BIOS N75 Ver. 01.24 01/30/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x431800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CC000000 mask 7FFC000000 uncachable [ 0.000000] 3 base 00CA000000 mask 7FFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xc7f00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x14553e000, 0x14553efff] PGTABLE [ 0.000000] BRK [0x14553f000, 0x14553ffff] PGTABLE [ 0.000000] BRK [0x145540000, 0x145540fff] PGTABLE [ 0.000000] BRK [0x145541000, 0x145541fff] PGTABLE [ 0.000000] BRK [0x145542000, 0x145542fff] PGTABLE [ 0.000000] BRK [0x145543000, 0x145543fff] PGTABLE [ 0.000000] BRK [0x145544000, 0x145544fff] PGTABLE [ 0.000000] BRK [0x145545000, 0x145545fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3192d000-0x34c8dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000C7EFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000C7EBC188 0000D4 (v01 HPQOEM SLIC-BPC 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000C7EEF000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000C7EC5000 02654A (v02 HPQOEM 807C 00000000 INTL 20121018) [ 0.000000] ACPI: FACS 0x00000000C7E58000 000040 [ 0.000000] ACPI: SSDT 0x00000000C7EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018) [ 0.000000] ACPI: TCPA 0x00000000C7EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C7EF9000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018) [ 0.000000] ACPI: UEFI 0x00000000C7E6A000 000042 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C7EF3000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EF2000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018) [ 0.000000] ACPI: MSDM 0x00000000C7EF1000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: WSMT 0x00000000C7EF0000 000028 (v01 HPQOEM 807C 00000001 HP 00000001) [ 0.000000] ACPI: HPET 0x00000000C7EEE000 000038 (v01 HPQOEM 807C 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000C7EED000 0000BC (v01 HPQOEM 807C 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000C7EEC000 00003C (v01 HPQOEM 807C 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000C7EC4000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EC3000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EC2000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EC1000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: DMAR 0x00000000C7EC0000 0000CC (v01 INTEL SKL 00000001 INTL 00000001) [ 0.000000] ACPI: NHLT 0x00000000C7EBF000 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000C7EBE000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240) [ 0.000000] ACPI: FPDT 0x00000000C7EBD000 000044 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: BGRT 0x00000000C7EFD000 000038 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C7EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004317fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x4317d5000-0x4317fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000004317fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c70fafff] [ 0.000000] node 0: [mem 0x00000000c7eff000-0x00000000c7efffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000004317fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004317fffff] [ 0.000000] On node 0 totalpages: 4163737 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 89 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12676 pages used for memmap [ 0.000000] DMA32 zone: 811260 pages, LIFO batch:31 [ 0.000000] Normal zone: 52320 pages used for memmap [ 0.000000] Normal zone: 3348480 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000ca800000-0x00000000cc7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc70fb000-0xc75fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xc75fb000-0xc7c7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7c7f000-0xc7e7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7e7f000-0xc7efefff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xcc7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc800000-0xf80f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.000000] e820: [mem 0xcc800000-0xf80f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4098588 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=3f2f5445-3b08-4786-b00a-1d79abd0f707 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16008544K/16654948K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 646404K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39065 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] DMAR: Host address width 39 [ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.004000] DMAR: RMRR base: 0x000000c7c37000 end: 0x000000c7c56fff [ 0.004000] DMAR: RMRR base: 0x000000ca000000 end: 0x000000cc7fffff [ 0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.004000] x2apic enabled [ 0.004000] Switched APIC routing to cluster x2apic. [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Detected 2400.000 MHz processor [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] CPU: Physical Processor ID: 0 [ 0.028000] CPU: Processor Core ID: 0 [ 0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028000] mce: CPU supports 8 MCE banks [ 0.028000] CPU0: Thermal monitoring enabled (TM1) [ 0.028000] process: using mwait in idle threads [ 0.028000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.028000] Spectre V2 : Mitigation: Full generic retpoline [ 0.028000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.028000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028000] Freeing SMP alternatives memory: 36K [ 0.039025] TSC deadline timer enabled [ 0.039029] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.039082] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.039111] ... version: 4 [ 0.039111] ... bit width: 48 [ 0.039112] ... generic registers: 4 [ 0.039112] ... value mask: 0000ffffffffffff [ 0.039113] ... max period: 00007fffffffffff [ 0.039113] ... fixed-purpose events: 3 [ 0.039114] ... event mask: 000000070000000f [ 0.039147] Hierarchical SRCU implementation. [ 0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.040000] smp: Bringing up secondary CPUs ... [ 0.040000] x86: Booting SMP configuration: [ 0.040000] .... node #0, CPUs: #1 #2 #3 [ 0.040000] smp: Brought up 1 node, 4 CPUs [ 0.040000] smpboot: Max logical packages: 1 [ 0.040000] smpboot: Total of 4 processors activated (19200.00 BogoMIPS) [ 0.040423] devtmpfs: initialized [ 0.040423] x86/mm: Memory block size: 128MB [ 0.041118] evm: security.selinux [ 0.041119] evm: security.SMACK64 [ 0.041119] evm: security.SMACK64EXEC [ 0.041120] evm: security.SMACK64TRANSMUTE [ 0.041120] evm: security.SMACK64MMAP [ 0.041121] evm: security.apparmor [ 0.041121] evm: security.ima [ 0.041122] evm: security.capability [ 0.041133] PM: Registering ACPI NVS region [mem 0xc7c7f000-0xc7e7efff] (2097152 bytes) [ 0.041133] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.041133] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.041133] pinctrl core: initialized pinctrl subsystem [ 0.041133] RTC time: 23:38:34, date: 05/20/18 [ 0.041133] NET: Registered protocol family 16 [ 0.041133] audit: initializing netlink subsys (disabled) [ 0.041133] audit: type=2000 audit(1526859514.040:1): state=initialized audit_enabled=0 res=1 [ 0.041133] cpuidle: using governor ladder [ 0.041133] cpuidle: using governor menu [ 0.041133] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.041133] ACPI: bus type PCI registered [ 0.041133] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.041133] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.041133] PCI: not using MMCONFIG [ 0.041133] PCI: Using configuration type 1 for base access [ 0.041133] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.041133] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041133] ACPI: Added _OSI(Module Device) [ 0.041133] ACPI: Added _OSI(Processor Device) [ 0.041133] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.041133] ACPI: Added _OSI(Processor Aggregator Device) [ 0.044451] ACPI: Executed 17 blocks of module-level executable AML code [ 0.058741] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.064641] ACPI: Dynamic OEM Table Load: [ 0.064653] ACPI: SSDT 0xFFFF9E4E5EB73800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20121018) [ 0.065004] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.066311] ACPI: Dynamic OEM Table Load: [ 0.066317] ACPI: SSDT 0xFFFF9E4E5E50C400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018) [ 0.066709] ACPI: Dynamic OEM Table Load: [ 0.066714] ACPI: SSDT 0xFFFF9E4E60948000 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121018) [ 0.067007] ACPI: Dynamic OEM Table Load: [ 0.067012] ACPI: SSDT 0xFFFF9E4E5E533600 000130 (v02 PmRef HwpLvt 00003000 INTL 20121018) [ 0.067888] ACPI: Dynamic OEM Table Load: [ 0.067895] ACPI: SSDT 0xFFFF9E4E5EB75800 0005AA (v02 PmRef ApIst 00003000 INTL 20121018) [ 0.068596] ACPI: Dynamic OEM Table Load: [ 0.068601] ACPI: SSDT 0xFFFF9E4E5E533000 000119 (v02 PmRef ApHwp 00003000 INTL 20121018) [ 0.068990] ACPI: Dynamic OEM Table Load: [ 0.068994] ACPI: SSDT 0xFFFF9E4E5E532600 000119 (v02 PmRef ApCst 00003000 INTL 20121018) [ 0.071135] ACPI: EC: EC started [ 0.071136] ACPI: EC: interrupt blocked [ 3.520302] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 3.520304] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.520306] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 3.520306] ACPI: Interpreter enabled [ 3.520359] ACPI: (supports S0 S3 S4 S5) [ 3.520360] ACPI: Using IOAPIC for interrupt routing [ 3.520407] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 3.523870] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 3.523878] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.524607] ACPI: GPE 0x23 active on init [ 3.528002] ACPI: Enabled 8 GPEs in block 00 to 7F [ 3.529683] ACPI: Power Resource [PG01] (on) [ 3.530083] ACPI: Power Resource [PG02] (on) [ 3.530498] ACPI: Power Resource [PG00] (on) [ 3.533778] ACPI: Power Resource [WRST] (on) [ 3.534041] ACPI: Power Resource [PXP] (on) [ 3.664754] ACPI: Power Resource [WRST] (on) [ 3.665302] ACPI: Power Resource [WRST] (on) [ 3.665862] ACPI: Power Resource [WRST] (on) [ 3.666398] ACPI: Power Resource [WRST] (on) [ 3.666969] ACPI: Power Resource [WRST] (on) [ 3.667505] ACPI: Power Resource [WRST] (on) [ 3.668045] ACPI: Power Resource [WRST] (on) [ 3.668583] ACPI: Power Resource [WRST] (on) [ 3.669116] ACPI: Power Resource [WRST] (on) [ 3.669656] ACPI: Power Resource [WRST] (on) [ 3.670203] ACPI: Power Resource [WRST] (on) [ 3.670712] ACPI: Power Resource [WRST] (on) [ 3.671213] ACPI: Power Resource [WRST] (on) [ 3.671713] ACPI: Power Resource [WRST] (on) [ 3.672218] ACPI: Power Resource [WRST] (on) [ 3.672720] ACPI: Power Resource [WRST] (on) [ 3.673221] ACPI: Power Resource [WRST] (on) [ 3.673723] ACPI: Power Resource [WRST] (on) [ 3.674224] ACPI: Power Resource [WRST] (on) [ 3.685448] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 3.685454] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.688793] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.688794] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.691041] PCI host bridge to bus 0000:00 [ 3.691043] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.691044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 3.691046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.691047] pci_bus 0000:00: root bus resource [mem 0xcc800000-0xf7ffffff window] [ 3.691048] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 3.691050] pci_bus 0000:00: root bus resource [bus 00-3e] [ 3.691059] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 3.691844] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 3.691856] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 3.691862] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 3.691867] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 3.691886] pci 0000:00:02.0: BAR 2: assigned to efifb [ 3.692724] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 3.692743] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit] [ 3.692803] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.693651] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 3.693673] pci 0000:00:14.2: reg 0x10: [mem 0xe124a000-0xe124afff 64bit] [ 3.694542] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 3.694682] pci 0000:00:15.0: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit] [ 3.696033] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 3.696061] pci 0000:00:16.0: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit] [ 3.696134] pci 0000:00:16.0: PME# supported from D3hot [ 3.696935] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 3.696953] pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff] [ 3.696960] pci 0000:00:17.0: reg 0x14: [mem 0xe124f000-0xe124f0ff] [ 3.696968] pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087] [ 3.696975] pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b] [ 3.696982] pci 0000:00:17.0: reg 0x20: [io 0x3040-0x305f] [ 3.696988] pci 0000:00:17.0: reg 0x24: [mem 0xe124d000-0xe124d7ff] [ 3.697028] pci 0000:00:17.0: PME# supported from D3hot [ 3.697836] pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400 [ 3.697908] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.698738] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400 [ 3.698803] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 3.699645] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 3.700508] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 3.700525] pci 0000:00:1f.2: reg 0x10: [mem 0xe1240000-0xe1243fff] [ 3.701353] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380 [ 3.701379] pci 0000:00:1f.3: reg 0x10: [mem 0xe1244000-0xe1247fff 64bit] [ 3.701404] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit] [ 3.701454] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 3.702277] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 3.702330] pci 0000:00:1f.4: reg 0x10: [mem 0xe124e000-0xe124e0ff 64bit] [ 3.702380] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 3.703230] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000 [ 3.703255] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff] [ 3.703340] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 3.704204] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 [ 3.704234] pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff] [ 3.704386] pci 0000:01:00.0: supports D1 D2 [ 3.704387] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.720047] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.720051] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff] [ 3.720142] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000 [ 3.720199] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit] [ 3.720391] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 3.732048] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 3.732052] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff] [ 3.734557] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.734642] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 3.734723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.734805] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.734886] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.734967] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.735048] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.735129] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.736001] ACPI: EC: interrupt unblocked [ 3.736001] ACPI: EC: event unblocked [ 3.736001] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.736001] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 3.736001] SCSI subsystem initialized [ 3.736010] libata version 3.00 loaded. [ 3.736023] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 3.736023] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.736023] pci 0000:00:02.0: vgaarb: bridge control possible [ 3.736023] vgaarb: loaded [ 3.736027] ACPI: bus type USB registered [ 3.736040] usbcore: registered new interface driver usbfs [ 3.736046] usbcore: registered new interface driver hub [ 3.736059] usbcore: registered new device driver usb [ 3.736089] EDAC MC: Ver: 3.0.0 [ 3.740023] Registered efivars operations [ 3.775399] PCI: Using ACPI for IRQ routing [ 3.781389] PCI: pci_cache_line_size set to 64 bytes [ 3.781494] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 3.781495] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 3.781496] e820: reserve RAM buffer [mem 0xc70fb000-0xc7ffffff] [ 3.781497] e820: reserve RAM buffer [mem 0xc7f00000-0xc7ffffff] [ 3.781498] e820: reserve RAM buffer [mem 0x431800000-0x433ffffff] [ 3.781575] NetLabel: Initializing [ 3.781576] NetLabel: domain hash size = 128 [ 3.781576] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.781588] NetLabel: unlabeled traffic allowed by default [ 3.781598] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.781598] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 3.784017] clocksource: Switched to clocksource hpet [ 3.793177] VFS: Disk quotas dquot_6.6.0 [ 3.793191] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.793274] AppArmor: AppArmor Filesystem Enabled [ 3.793294] pnp: PnP ACPI init [ 3.793491] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 3.793492] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 3.793494] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 3.793495] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 3.793497] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 3.793501] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.793832] system 00:01: [io 0x2000-0x20fe] has been reserved [ 3.793835] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.793986] system 00:02: [io 0x0680-0x069f] has been reserved [ 3.793987] system 00:02: [io 0xffff] has been reserved [ 3.793988] system 00:02: [io 0xffff] has been reserved [ 3.793990] system 00:02: [io 0xffff] has been reserved [ 3.793993] system 00:02: [io 0x1800-0x18fe] has been reserved [ 3.793995] system 00:02: [io 0x164e-0x164f] has been reserved [ 3.793998] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.794100] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.794135] system 00:04: [io 0x1854-0x1857] has been reserved [ 3.794138] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 3.794155] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active) [ 3.794172] pnp 00:06: Plug and Play ACPI device, IDs SYN3039 SYN0100 SYN0002 PNP0f13 (active) [ 3.794242] system 00:07: [io 0x0200-0x023f] has been reserved [ 3.794244] system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved [ 3.794247] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.795588] system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved [ 3.795590] system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved [ 3.795593] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.796117] system 00:09: [mem 0xfe030000-0xfe030007] has been reserved [ 3.796121] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.796418] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 3.796420] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 3.796421] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 3.796422] system 00:0a: [mem 0xf8000000-0xfbffffff] could not be reserved [ 3.796424] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 3.796425] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 3.796427] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 3.796428] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 3.796429] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 3.796431] system 00:0a: [mem 0xcc800000-0xcc81ffff] has been reserved [ 3.796434] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.796786] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 3.796853] pnp: PnP ACPI: found 12 devices [ 3.805203] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.805217] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 3.805219] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 3.805233] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcc900000-0xccafffff 64bit pref] [ 3.805235] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 3.805237] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.805243] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 3.805246] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff] [ 3.805249] pci 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref] [ 3.805253] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 3.805256] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff] [ 3.805262] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.805264] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.805265] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.805266] pci_bus 0000:00: resource 7 [mem 0xcc800000-0xf7ffffff window] [ 3.805267] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 3.805269] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 3.805270] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff] [ 3.805271] pci_bus 0000:01: resource 2 [mem 0xcc900000-0xccafffff 64bit pref] [ 3.805272] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff] [ 3.805431] NET: Registered protocol family 2 [ 3.805615] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 3.805779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.805892] TCP: Hash tables configured (established 131072 bind 65536) [ 3.805922] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 3.805957] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 3.806012] NET: Registered protocol family 1 [ 3.806025] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.806333] PCI: CLS 0 bytes, default 64 [ 3.806358] Unpacking initramfs... [ 4.522666] Freeing initrd memory: 52612K [ 4.522709] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.0 [ 4.522724] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.522726] software IO TLB [mem 0xb3f52000-0xb7f52000] (64MB) mapped at [0000000015691d68-0000000094798e38] [ 4.522960] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns [ 4.523100] Scanning for low memory corruption every 60 seconds [ 4.523758] Initialise system trusted keyrings [ 4.523766] Key type blacklist registered [ 4.523825] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 4.524836] zbud: loaded [ 4.525269] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.525441] fuse init (API version 7.26) [ 4.528602] Key type asymmetric registered [ 4.528603] Asymmetric key parser 'x509' registered [ 4.528627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 4.528679] io scheduler noop registered [ 4.528680] io scheduler deadline registered [ 4.528730] io scheduler cfq registered (default) [ 4.529345] pcieport 0000:00:1c.0: AER enabled with IRQ 122 [ 4.529369] pcieport 0000:00:1c.3: AER enabled with IRQ 123 [ 4.529381] pcieport 0000:00:1c.0: Signaling PME with IRQ 122 [ 4.529394] pcieport 0000:00:1c.3: Signaling PME with IRQ 123 [ 4.529414] pciehp 0000:00:1c.0:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 4.529478] efifb: probing for efifb [ 4.529486] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 4.529487] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 4.529488] efifb: scrolling: redraw [ 4.529489] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.529591] Console: switching to colour frame buffer device 128x48 [ 4.529602] fb0: EFI VGA frame buffer device [ 4.529608] intel_idle: MWAIT substates: 0x11142120 [ 4.529609] intel_idle: v0.4.1 model 0x4E [ 4.529853] intel_idle: lapic_timer_reliable_states 0xffffffff [ 4.530047] ACPI: AC Adapter [AC] (on-line) [ 4.530098] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 4.530112] ACPI: Sleep Button [SLPB] [ 4.530136] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 4.530148] ACPI: Lid Switch [LID] [ 4.530174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.530233] ACPI: Power Button [PWRF] [ 4.538126] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.539353] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.539355] ACPI: Thermal Zone [CPUZ] (43 C) [ 4.543569] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.543570] ACPI: Thermal Zone [GFXZ] (0 C) [ 4.546243] thermal LNXTHERM:02: registered as thermal_zone2 [ 4.546244] ACPI: Thermal Zone [EXTZ] (38 C) [ 4.550474] thermal LNXTHERM:03: registered as thermal_zone3 [ 4.550475] ACPI: Thermal Zone [LOCZ] (41 C) [ 4.553482] thermal LNXTHERM:04: registered as thermal_zone4 [ 4.553483] ACPI: Thermal Zone [BATZ] (30 C) [ 4.553873] thermal LNXTHERM:05: registered as thermal_zone5 [ 4.553873] ACPI: Thermal Zone [PCHZ] (127 C) [ 4.554059] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.556978] Linux agpgart interface v0.103 [ 4.562510] ACPI: Battery Slot [BAT0] (battery present) [ 4.573187] tpm_tis 00:0b: 1.2 TPM (device-id 0x1B, rev-id 16) [ 4.663969] loop: module loaded [ 4.664171] libphy: Fixed MDIO Bus: probed [ 4.664172] tun: Universal TUN/TAP device driver, 1.6 [ 4.664238] PPP generic driver version 2.4.2 [ 4.664303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.664305] ehci-pci: EHCI PCI platform driver [ 4.664315] ehci-platform: EHCI generic platform driver [ 4.664326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.664327] ohci-pci: OHCI PCI platform driver [ 4.664334] ohci-platform: OHCI generic platform driver [ 4.664339] uhci_hcd: USB Universal Host Controller Interface driver [ 4.664580] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.664586] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.665683] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 4.665689] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.665857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.665858] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.665860] usb usb1: Product: xHCI Host Controller [ 4.665861] usb usb1: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 4.665863] usb usb1: SerialNumber: 0000:00:14.0 [ 4.665989] hub 1-0:1.0: USB hub found [ 4.666007] hub 1-0:1.0: 12 ports detected [ 4.666705] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.666708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.666741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.666742] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.666743] usb usb2: Product: xHCI Host Controller [ 4.666745] usb usb2: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 4.666746] usb usb2: SerialNumber: 0000:00:14.0 [ 4.666862] hub 2-0:1.0: USB hub found [ 4.666875] hub 2-0:1.0: 6 ports detected [ 4.667152] usb: port power management may be unreliable [ 4.667590] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.669006] i8042: Detected active multiplexing controller, rev 1.1 [ 4.669247] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.669250] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.669272] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.669289] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.669305] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.669465] mousedev: PS/2 mouse device common for all mice [ 4.669757] rtc_cmos 00:03: RTC can wake from S4 [ 4.670173] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 4.670260] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.670268] i2c /dev entries driver [ 4.670310] device-mapper: uevent: version 1.0.3 [ 4.670400] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 4.670403] intel_pstate: Intel P-state driver initializing [ 4.670977] intel_pstate: HWP enabled [ 4.671170] ledtrig-cpu: registered to indicate activity on CPUs [ 4.671188] EFI Variables Facility v0.08 2004-May-17 [ 4.694339] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.719299] intel_pmc_core: initialized [ 4.719469] NET: Registered protocol family 10 [ 4.723742] Segment Routing with IPv6 [ 4.723760] NET: Registered protocol family 17 [ 4.723836] Key type dns_resolver registered [ 4.724217] RAS: Correctable Errors collector initialized. [ 4.724256] microcode: sig=0x406e3, pf=0x80, revision=0xc2 [ 4.724356] microcode: Microcode Update Driver: v2.2. [ 4.724364] sched_clock: Marking stable (4724353705, 0)->(4708135636, 16218069) [ 4.724752] registered taskstats version 1 [ 4.724758] Loading compiled-in X.509 certificates [ 4.726806] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208' [ 4.727379] Loaded UEFI:db cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' linked to secondary sys keyring [ 4.727398] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 4.727416] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 4.729574] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 4.730161] zswap: loaded using pool lzo/zbud [ 4.733731] Key type big_key registered [ 4.733735] Key type trusted registered [ 4.735188] Key type encrypted registered [ 4.735191] AppArmor: AppArmor sha1 policy hashing enabled [ 4.957444] evm: HMAC attrs: 0x1 [ 4.958592] Magic number: 2:519:656 [ 4.958849] rtc_cmos 00:03: setting system clock to 2018-05-20 23:38:39 UTC (1526859519) [ 4.959183] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.959183] EDD information not available. [ 4.961243] Freeing unused kernel memory: 2404K [ 4.961244] Write protecting the kernel read-only data: 20480k [ 4.961784] Freeing unused kernel memory: 2008K [ 4.964883] Freeing unused kernel memory: 1904K [ 4.970113] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.970114] x86/mm: Checking user space page tables [ 4.975191] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.004034] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 5.083843] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 5.085854] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 5.087661] ahci 0000:00:17.0: version 3.0 [ 5.087886] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 5.087910] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 5.087913] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 5.088732] pps_core: LinuxPPS API ver. 1 registered [ 5.088734] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 5.090049] PTP clock support registered [ 5.095832] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 5.095833] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.096047] scsi host0: ahci [ 5.108048] scsi host1: ahci [ 5.108656] scsi host2: ahci [ 5.108707] ata1: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d100 irq 126 [ 5.108708] ata2: DUMMY [ 5.108710] ata3: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d200 irq 126 [ 5.109004] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 5.109254] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.152813] usb 1-4: New USB device found, idVendor=0424, idProduct=2134 [ 5.152815] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.152816] usb 1-4: Product: USB2134B [ 5.152817] usb 1-4: Manufacturer: SMSC [ 5.153176] hub 1-4:1.0: USB hub found [ 5.153207] hub 1-4:1.0: 4 ports detected [ 5.280085] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 5.300970] usb 2-2: New USB device found, idVendor=18a5, idProduct=0246 [ 5.300971] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.300973] usb 2-2: Product: USB 3.0 External SSD [ 5.300974] usb 2-2: Manufacturer: Verbatim [ 5.300975] usb 2-2: SerialNumber: 070774E5501F3813 [ 5.351818] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 5.420241] ata1: SATA link down (SStatus 4 SControl 300) [ 5.420255] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:60:24:48:0f:dd [ 5.420271] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 5.420378] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 5.421452] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 5.423722] [drm] Memory usable by graphics device = 4096M [ 5.423724] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 5.423725] fb: switching to inteldrmfb from EFI VGA [ 5.423739] Console: switching to colour dummy device 80x25 [ 5.423871] [drm] Replacing VGA console driver [ 5.430099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.430099] [drm] Driver supports precise vblank timestamp query. [ 5.432027] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 5.432256] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.432719] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) [ 5.441957] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 5.444554] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.445080] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 5.495161] fbcon: inteldrmfb (fb0) is primary device [ 5.495218] Console: switching to colour frame buffer device 240x67 [ 5.495244] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.532404] clocksource: Switched to clocksource tsc [ 5.586779] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b [ 5.586781] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.712485] usb 2-4: new SuperSpeed USB device number 3 using xhci_hcd [ 5.732036] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.732829] usb 2-4: New USB device found, idVendor=0424, idProduct=5534 [ 5.732830] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 5.732832] usb 2-4: Product: USB5534B [ 5.732833] usb 2-4: Manufacturer: SMSC [ 5.733484] hub 2-4:1.0: USB hub found [ 5.733600] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 5.733650] hub 2-4:1.0: 4 ports detected [ 5.734575] ata3.00: ATA-10: SAMSUNG MZNLN256HMHQ-000H1, MAV21H3Q, max UDMA/100 [ 5.734577] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.735368] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 5.736714] ata3.00: configured for UDMA/100 [ 5.736871] scsi 2:0:0:0: Direct-Access ATA SAMSUNG MZNLN256 1H3Q PQ: 0 ANSI: 5 [ 5.737244] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 5.737379] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 5.737380] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 5.737393] sd 2:0:0:0: [sda] Write Protect is off [ 5.737396] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.737418] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.738702] sda: sda1 sda2 [ 5.738929] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.740560] usb-storage 2-2:1.0: USB Mass Storage device detected [ 5.740733] scsi host3: usb-storage 2-2:1.0 [ 5.740818] usbcore: registered new interface driver usb-storage [ 5.742083] usbcore: registered new interface driver uas [ 5.816013] usb 1-4.1: new full-speed USB device number 4 using xhci_hcd [ 5.919429] usb 1-4.1: New USB device found, idVendor=24ae, idProduct=2003 [ 5.919431] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.919433] usb 1-4.1: Product: RAPOO 5G Wireless Device [ 5.919434] usb 1-4.1: Manufacturer: RAPOO [ 6.044225] usb 1-9: new high-speed USB device number 5 using xhci_hcd [ 6.206055] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9 [ 6.226422] usb 1-9: New USB device found, idVendor=04ca, idProduct=7054 [ 6.226425] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 6.226427] usb 1-9: Product: HP HD Camera [ 6.226442] usb 1-9: Manufacturer: DETNR019I83VQ5 [ 6.226443] usb 1-9: SerialNumber: 200901010001 [ 6.272271] usb 1-4.4: new full-speed USB device number 6 using xhci_hcd [ 6.377860] usb 1-4.4: New USB device found, idVendor=046d, idProduct=c52b [ 6.377862] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.377863] usb 1-4.4: Product: USB Receiver [ 6.377864] usb 1-4.4: Manufacturer: Logitech [ 6.385768] hidraw: raw HID events driver (C) Jiri Kosina [ 6.394866] usbcore: registered new interface driver usbhid [ 6.394867] usbhid: USB HID core driver [ 6.397192] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:24AE:2003.0001/input/input12 [ 6.397453] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4.4/input2 [ 6.456523] hid-generic 0003:24AE:2003.0001: input,hidraw1: USB HID v1.10 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:14.0-4.1/input0 [ 6.456775] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:24AE:2003.0002/input/input13 [ 6.516370] hid-generic 0003:24AE:2003.0002: input,hiddev1,hidraw2: USB HID v1.10 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:14.0-4.1/input1 [ 6.533798] input: Logitech M310 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.2/0003:046D:C52B.0005/0003:046D:1024.0006/input/input14 [ 6.533925] logitech-hidpp-device 0003:046D:1024.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M310] on usb-0000:00:14.0-4.4:1 [ 6.535467] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.2/0003:046D:C52B.0005/0003:046D:101B.0008/input/input15 [ 6.535722] logitech-hidpp-device 0003:046D:101B.0008: input,hidraw4: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-4.4:3 [ 6.541882] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.2/0003:046D:C52B.0005/0003:046D:2011.0007/input/input16 [ 6.541990] logitech-hidpp-device 0003:046D:2011.0007: input,hidraw5: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-4.4:2 [ 6.749139] scsi 3:0:0:0: Direct-Access Verbatim USB External SSD PMAP PQ: 0 ANSI: 6 [ 6.749531] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 6.749816] sd 3:0:0:0: [sdb] 494403584 512-byte logical blocks: (253 GB/236 GiB) [ 6.750261] sd 3:0:0:0: [sdb] Write Protect is off [ 6.750262] sd 3:0:0:0: [sdb] Mode Sense: 2b 00 00 08 [ 6.750716] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 6.757909] sdb: sdb1 [ 6.759735] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 6.812585] [drm] RC6 on [ 6.964839] psmouse serio3: synaptics: queried max coordinates: x [..5720], y [..4836] [ 6.996115] psmouse serio3: synaptics: queried min coordinates: x [1332..], y [1146..] [ 6.996120] psmouse serio3: synaptics: Your touchpad (PNP: SYN3039 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 7.052947] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3146, fw id: 2004303 [ 7.088375] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11 [ 7.570339] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.688150] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.769396] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.788274] systemd[1]: Detected architecture x86-64. [ 7.790664] systemd[1]: Set hostname to . [ 7.875198] systemd[1]: Reached target User and Group Name Lookups. [ 7.875285] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.875478] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.875604] systemd[1]: Created slice User and Session Slice. [ 7.875614] systemd[1]: Reached target Remote File Systems. [ 7.875710] systemd[1]: Created slice System Slice. [ 7.875780] systemd[1]: Listening on udev Control Socket. [ 7.886088] random: crng init done [ 7.891390] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.911739] lp: driver loaded but no devices found [ 7.916859] ppdev: user-space parallel port driver [ 7.949118] systemd-journald[333]: Received request to flush runtime journal from PID 1 [ 8.133957] input: HP Wireless hotkeys as /devices/virtual/input/input18 [ 8.167595] hp_accel: laptop model unknown, using default axes configuration [ 8.255786] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 8.261865] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 8.278618] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 8.303307] lis3lv02d: 8 bits 3DC sensor found [ 8.388173] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 8.389468] media: Linux media interface: v0.10 [ 8.395010] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.409417] Linux video capture interface: v2.00 [ 8.420701] Bluetooth: Core ver 2.22 [ 8.420715] NET: Registered protocol family 31 [ 8.420716] Bluetooth: HCI device and connection manager initialized [ 8.420718] Bluetooth: HCI socket layer initialized [ 8.420721] Bluetooth: L2CAP socket layer initialized [ 8.420727] Bluetooth: SCO socket layer initialized [ 8.442715] uvcvideo: Found UVC 1.00 device HP HD Camera (04ca:7054) [ 8.443476] usbcore: registered new interface driver btusb [ 8.451090] Bluetooth: hci0: Firmware revision 0.0 build 176 week 45 2017 [ 8.460083] uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized! [ 8.460087] uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized! [ 8.461908] uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized! [ 8.462171] input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input19 [ 8.464692] usbcore: registered new interface driver uvcvideo [ 8.464695] USB Video Class driver (1.1.1) [ 8.496506] ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000dcdbd58f (20170831/exresop-593) [ 8.496515] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20170831/dswexec-461) [ 8.496524] Initialized Local Variables for Method [WVPO]: [ 8.496525] Local1: 0000000064f17b7a Buffer(12) 00 00 00 00 00 00 00 00 [ 8.496538] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 8.496539] Arg0: 0000000033f3aaf5 Integer 0000000000000004 [ 8.496544] Arg1: 00000000dcdbd58f Integer 0000000000000000 [ 8.496551] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 8.496561] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 8.498601] ACPI Error: Needed [Buffer/String/Package], found [Integer] 000000000f3e14d6 (20170831/exresop-593) [ 8.498609] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20170831/dswexec-461) [ 8.498618] Initialized Local Variables for Method [WVPO]: [ 8.498619] Local1: 0000000016b490cd Buffer(12) 00 00 00 00 00 00 00 00 [ 8.498632] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 8.498633] Arg0: 000000002bcd8c1c Integer 0000000000000004 [ 8.498638] Arg1: 000000000f3e14d6 Integer 0000000000000000 [ 8.498645] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 8.498655] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 8.502710] ACPI Error: Needed [Buffer/String/Package], found [Integer] 000000000f1f404c (20170831/exresop-593) [ 8.502727] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20170831/dswexec-461) [ 8.502735] Initialized Local Variables for Method [WVPO]: [ 8.502736] Local1: 00000000eec7aaac Buffer(12) 00 00 00 00 00 00 00 00 [ 8.502749] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 8.502750] Arg0: 00000000b647f201 Integer 0000000000000004 [ 8.502755] Arg1: 000000000f1f404c Integer 0000000000000000 [ 8.502762] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 8.502772] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 8.502844] input: HP WMI hotkeys as /devices/virtual/input/input20 [ 8.532015] ACPI Error: Attempt to CreateField of length zero (20170831/dsopcode-168) [ 8.532026] Initialized Local Variables for Method [WVPI]: [ 8.532027] Local0: 00000000921f6cdc Integer 0000000000000080 [ 8.532034] Local1: 0000000015b16c7c Package 0000000015b16c7c [ 8.532039] Initialized Arguments for Method [WVPI]: (3 arguments defined for method invocation) [ 8.532040] Arg0: 000000004723053a Integer 0000000000000000 [ 8.532044] Arg1: 0000000072159cf5 Integer 0000000000000003 [ 8.532049] Arg2: 00000000414fc921 Buffer(20) 53 45 43 55 01 00 00 00 [ 8.532061] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20170831/psparse-550) [ 8.532073] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20170831/psparse-550) [ 8.550372] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.550645] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.551337] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 8.551338] cfg80211: failed to load regulatory.db [ 8.569933] Intel(R) Wireless WiFi driver for Linux [ 8.569934] Copyright(c) 2003- 2015 Intel Corporation [ 8.570001] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 8.582248] iwlwifi 0000:02:00.0: loaded firmware version 34.0.1 op_mode iwlmvm [ 8.629719] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 8.629721] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 8.629721] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.629722] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 8.629723] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 8.629724] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 8.631805] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 8.669993] AVX2 version of gcm_enc/dec engaged. [ 8.669994] AES CTR mode by8 optimization enabled [ 8.703103] iwlwifi 0000:02:00.0: base HW address: ac:ed:5c:51:bc:bf [ 8.750753] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 8.750954] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 8.810789] snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing. [ 8.811215] snd_hda_codec_conexant hdaudioC0D0: action: 0 gpio_led: 0 [ 8.811342] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 8.811345] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 8.811347] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 8.811348] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 8.811350] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 8.811352] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 8.811354] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 8.811355] snd_hda_codec_conexant hdaudioC0D0: Line=0x18 [ 8.812844] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 8.812846] snd_hda_codec_conexant hdaudioC0D0: action: 1 gpio_led: 0 [ 8.813040] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 8.813297] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 8.813313] thermal thermal_zone7: failed to read out thermal zone (-61) [ 8.816405] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0 [ 8.839510] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 8.839576] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 8.839679] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 8.839734] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 8.839788] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 8.839851] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 8.839905] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 8.839960] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 8.840049] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 8.860385] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 1 [ 8.879914] intel_rapl: Found RAPL domain package [ 8.879915] intel_rapl: Found RAPL domain core [ 8.879916] intel_rapl: Found RAPL domain uncore [ 9.046040] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 9.084213] audit: type=1400 audit(1526859523.621:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine" pid=816 comm="apparmor_parser" [ 9.084216] audit: type=1400 audit(1526859523.621:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=816 comm="apparmor_parser" [ 9.088961] audit: type=1400 audit(1526859523.625:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=815 comm="apparmor_parser" [ 9.088965] audit: type=1400 audit(1526859523.625:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=815 comm="apparmor_parser" [ 9.088967] audit: type=1400 audit(1526859523.625:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=815 comm="apparmor_parser" [ 9.088970] audit: type=1400 audit(1526859523.625:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=815 comm="apparmor_parser" [ 9.090719] audit: type=1400 audit(1526859523.625:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=813 comm="apparmor_parser" [ 9.090722] audit: type=1400 audit(1526859523.625:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=813 comm="apparmor_parser" [ 9.093308] audit: type=1400 audit(1526859523.629:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=827 comm="apparmor_parser" [ 9.093312] audit: type=1400 audit(1526859523.629:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=827 comm="apparmor_parser" [ 9.379728] Adding 33554428k swap on /swapfile. Priority:-2 extents:216 across:224018432k SSFS [ 9.450504] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.450506] Bluetooth: BNEP filters: protocol multicast [ 9.450509] Bluetooth: BNEP socket layer initialized [ 9.680078] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input30 [ 9.948149] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 10.136456] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 10.140044] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 10.387625] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 10.472761] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 11.171901] Bluetooth: RFCOMM TTY layer initialized [ 11.171907] Bluetooth: RFCOMM socket layer initialized [ 11.171911] Bluetooth: RFCOMM ver 1.11 [ 13.902619] wlp2s0: authenticate with 34:31:c4:c9:09:92 [ 13.910287] wlp2s0: send auth to 34:31:c4:c9:09:92 (try 1/3) [ 13.917980] wlp2s0: authenticated [ 13.920033] wlp2s0: associate with 34:31:c4:c9:09:92 (try 1/3) [ 13.935163] wlp2s0: RX AssocResp from 34:31:c4:c9:09:92 (capab=0x411 status=0 aid=5) [ 13.937568] wlp2s0: associated [ 13.970063] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 13.984062] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 34:31:c4:c9:09:92 [ 14.119203] logitech-hidpp-device 0003:046D:2011.0007: HID++ 1.0 device connected. [ 16.196768] PKCS#7 signature not signed with a trusted key [ 16.196788] vboxdrv: loading out-of-tree module taints kernel. [ 16.196965] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 16.206863] vboxdrv: Found 4 processor cores [ 16.215252] Guest personality initialized and is inactive [ 16.215314] VMCI host device registered (name=vmci, major=10, minor=52) [ 16.215315] Initialized host personality [ 16.224317] vboxdrv: TSC mode is Invariant, tentative frequency 2399988169 Hz [ 16.224318] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001) [ 16.230507] PKCS#7 signature not signed with a trusted key [ 16.230951] VBoxNetFlt: Successfully started. [ 16.237685] PKCS#7 signature not signed with a trusted key [ 16.237962] VBoxNetAdp: Successfully started. [ 16.243455] PKCS#7 signature not signed with a trusted key [ 16.243833] VBoxPciLinuxInit [ 16.249263] vboxpci: IOMMU not found (not registered) [ 16.255072] NET: Registered protocol family 40 [ 30.927866] rfkill: input handler disabled [ 32.917138] EXT4-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended [ 32.921608] EXT4-fs (sdb1): mounting with "discard" option, but the device does not support discard [ 32.921611] EXT4-fs (sdb1): mounted filesystem without journal. Opts: discard [ 126.564651] rfkill: input handler enabled [ 138.904291] rfkill: input handler disabled