[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-21-generic (buildd@lgw01-21) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=bbf6846f-7622-4638-8e7e-286b6badb71d ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cb5c1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb5c2000-0x00000000cb7c3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb7c4000-0x00000000db39dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db39e000-0x00000000dcdc7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dcdc8000-0x00000000dce17fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dce18000-0x00000000dce7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dcf7f000-0x00000000dcffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20C0S1CWAU/20C0S1CWAU, BIOS GQET48WW (1.28 ) 01/14/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x021fe000, 0x021fefff] PGTABLE [ 0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE [ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE [ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33af6000-0x35d72fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000B4 (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000DCFFA000 00010C (v05 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000DCFE9000 00CFEE (v02 LENOVO TP-GQ 00001280 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000DCF69000 000040 [ 0.000000] ACPI: SLIC 0x00000000DCFFD000 000176 (v01 LENOVO TP-GQ 00001280 PTEC 00000001) [ 0.000000] ACPI: ASF! 0x00000000DCFFC000 0000A5 (v32 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000DCFF9000 000038 (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: LPIT 0x00000000DCFF8000 000094 (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000DCFF7000 000098 (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000DCFF6000 00003C (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000DCFE8000 000539 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DCFE7000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DCFE3000 003598 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000DCFE2000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000571 (v01 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x00000000DCFE0000 000042 (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000DCEB3000 000055 (v03 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000DCFDF000 000046 (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000DCFDE000 000064 (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000DCFDD000 0002CE (v01 LENOVO TP-GQ 00001280 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000DCFDC000 000A3A (v01 LENOVO IsctTabl 00001000 INTL 20120711) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21f5f8000-0x21f5fcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cb5c1fff] [ 0.000000] node 0: [mem 0x00000000cb7c4000-0x00000000db39dfff] [ 0.000000] node 0: [mem 0x00000000dcfff000-0x00000000dcffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff] [ 0.000000] On node 0 totalpages: 2074425 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13959 pages used for memmap [ 0.000000] DMA32 zone: 893341 pages, LIFO batch:31 [ 0.000000] Normal zone: 18392 pages used for memmap [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb5c2000-0xcb7c3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb39e000-0xdcdc7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdcdc8000-0xdce17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdce18000-0xdce7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdcf7f000-0xdcffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021f200000 s98008 r8192 d28968 u262144 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2041989 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=bbf6846f-7622-4638-8e7e-286b6badb71d ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8045388K/8297700K available (8356K kernel code, 1278K rwdata, 3920K rodata, 1476K init, 1292K bss, 252312K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:760 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.376 MHz processor [ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.75 BogoMIPS (lpj=9577504) [ 0.000045] pid_max: default: 32768 minimum: 301 [ 0.000051] ACPI: Core revision 20150930 [ 0.024146] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.024174] Security Framework initialized [ 0.024176] Yama: becoming mindful. [ 0.024194] AppArmor: AppArmor initialized [ 0.024934] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.027127] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028053] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028066] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028325] Initializing cgroup subsys io [ 0.028329] Initializing cgroup subsys memory [ 0.028336] Initializing cgroup subsys devices [ 0.028339] Initializing cgroup subsys freezer [ 0.028341] Initializing cgroup subsys net_cls [ 0.028344] Initializing cgroup subsys perf_event [ 0.028347] Initializing cgroup subsys net_prio [ 0.028349] Initializing cgroup subsys hugetlb [ 0.028353] Initializing cgroup subsys pids [ 0.028382] CPU: Physical Processor ID: 0 [ 0.028383] CPU: Processor Core ID: 0 [ 0.028388] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028390] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.029622] mce: CPU supports 7 MCE banks [ 0.029639] CPU0: Thermal monitoring enabled (TM1) [ 0.029649] process: using mwait in idle threads [ 0.029654] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.029655] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.030102] Freeing SMP alternatives memory: 28K (ffffffff820b2000 - ffffffff820b9000) [ 0.040599] ftrace: allocating 31878 entries in 125 pages [ 0.058537] smpboot: Max logical packages: 4 [ 0.058542] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.059160] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.098849] TSC deadline timer enabled [ 0.098852] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.098870] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.098897] ... version: 3 [ 0.098898] ... bit width: 48 [ 0.098899] ... generic registers: 4 [ 0.098901] ... value mask: 0000ffffffffffff [ 0.098902] ... max period: 0000ffffffffffff [ 0.098903] ... fixed-purpose events: 3 [ 0.098904] ... event mask: 000000070000000f [ 0.099972] x86: Booting SMP configuration: [ 0.099974] .... node #0, CPUs: #1 [ 0.103869] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.103963] #2 #3 [ 0.111701] x86: Booted up 1 node, 4 CPUs [ 0.111705] smpboot: Total of 4 processors activated (19155.00 BogoMIPS) [ 0.116628] devtmpfs: initialized [ 0.119762] evm: security.selinux [ 0.119763] evm: security.SMACK64 [ 0.119765] evm: security.SMACK64EXEC [ 0.119766] evm: security.SMACK64TRANSMUTE [ 0.119767] evm: security.SMACK64MMAP [ 0.119768] evm: security.ima [ 0.119769] evm: security.capability [ 0.119846] PM: Registering ACPI NVS region [mem 0xdcdc8000-0xdce17fff] (327680 bytes) [ 0.119853] PM: Registering ACPI NVS region [mem 0xdce7f000-0xdcf7efff] (1048576 bytes) [ 0.119972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.120081] pinctrl core: initialized pinctrl subsystem [ 0.120215] RTC time: 1:51:51, date: 05/04/16 [ 0.120367] NET: Registered protocol family 16 [ 0.136455] cpuidle: using governor ladder [ 0.148459] cpuidle: using governor menu [ 0.148463] PCCT header not found. [ 0.148543] ACPI: bus type PCI registered [ 0.148545] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.148746] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.148748] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.148756] PCI: Using configuration type 1 for base access [ 0.148792] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.168909] ACPI: Added _OSI(Module Device) [ 0.168911] ACPI: Added _OSI(Processor Device) [ 0.168913] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.168915] ACPI: Added _OSI(Processor Aggregator Device) [ 0.174177] ACPI: Executed 1 blocks of module-level executable AML code [ 0.178523] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.182575] ACPI: Dynamic OEM Table Load: [ 0.182586] ACPI: SSDT 0xFFFF8802155BB000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.183571] ACPI: Dynamic OEM Table Load: [ 0.183581] ACPI: SSDT 0xFFFF88021558B000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.184631] ACPI: Dynamic OEM Table Load: [ 0.184639] ACPI: SSDT 0xFFFF88021557FC00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.186206] ACPI : EC: EC started [ 0.188093] ACPI: Interpreter enabled [ 0.188115] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.188146] ACPI: (supports S0 S1 S3 S4 S5) [ 0.188148] ACPI: Using IOAPIC for interrupt routing [ 0.188186] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.200037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.200045] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.200202] \_SB_.PCI0:_OSC invalid UUID [ 0.200203] _OSC request data:1 1f 0 [ 0.200209] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.200900] PCI host bridge to bus 0000:00 [ 0.200905] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.200907] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.200910] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.200912] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.200915] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.200925] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.201116] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.201135] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.201144] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.201150] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.201329] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.201345] pci 0000:00:03.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit] [ 0.201552] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.201581] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit] [ 0.201637] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.201768] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.201819] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.201851] pci 0000:00:16.0: reg 0x10: [mem 0xf0619000-0xf061901f 64bit] [ 0.201916] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.202095] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.202122] pci 0000:00:1b.0: reg 0x10: [mem 0xf0614000-0xf0617fff 64bit] [ 0.202185] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.202314] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.202363] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.202432] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.202610] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.202661] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 0.202732] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.202909] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.202960] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.203030] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.203258] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.203290] pci 0000:00:1d.0: reg 0x10: [mem 0xf061d000-0xf061d3ff] [ 0.203371] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.203550] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.203829] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.203852] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.203860] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.203869] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.203877] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.203886] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.203894] pci 0000:00:1f.2: reg 0x24: [mem 0xf061c000-0xf061c7ff] [ 0.203925] pci 0000:00:1f.2: PME# supported from D3hot [ 0.204093] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.204112] pci 0000:00:1f.3: reg 0x10: [mem 0xf0618000-0xf06180ff 64bit] [ 0.204134] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.204368] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.204472] pci 0000:04:00.0: [8086:08b2] type 00 class 0x028000 [ 0.204547] pci 0000:04:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit] [ 0.204745] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.205067] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.212655] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.212661] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff] [ 0.212740] pci 0000:05:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.212777] pci 0000:05:00.0: reg 0x10: [mem 0xf0400000-0xf0400fff] [ 0.212899] pci 0000:05:00.0: supports D1 D2 [ 0.212902] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.212941] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.220645] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.220651] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.221823] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.221883] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 10 11 12 14 15) [ 0.221939] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.221994] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.222049] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.222105] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.222161] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.222216] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *9 [ 0.222631] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.222691] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.222834] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.222837] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.222840] vgaarb: loaded [ 0.222842] vgaarb: bridge control possible 0000:00:02.0 [ 0.223137] SCSI subsystem initialized [ 0.223189] libata version 3.00 loaded. [ 0.223220] ACPI: bus type USB registered [ 0.223240] usbcore: registered new interface driver usbfs [ 0.223250] usbcore: registered new interface driver hub [ 0.223273] usbcore: registered new device driver usb [ 0.223450] PCI: Using ACPI for IRQ routing [ 0.224931] PCI: pci_cache_line_size set to 64 bytes [ 0.224989] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.224992] e820: reserve RAM buffer [mem 0xcb5c2000-0xcbffffff] [ 0.224993] e820: reserve RAM buffer [mem 0xdb39e000-0xdbffffff] [ 0.224995] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff] [ 0.224996] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff] [ 0.225145] NetLabel: Initializing [ 0.225147] NetLabel: domain hash size = 128 [ 0.225148] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.225162] NetLabel: unlabeled traffic allowed by default [ 0.225250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.225257] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.227284] clocksource: Switched to clocksource hpet [ 0.234766] AppArmor: AppArmor Filesystem Enabled [ 0.234847] pnp: PnP ACPI init [ 0.235006] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.235011] system 00:00: [io 0xffff] has been reserved [ 0.235013] system 00:00: [io 0xffff] has been reserved [ 0.235015] system 00:00: [io 0xffff] has been reserved [ 0.235018] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.235020] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.235025] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235083] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.235143] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.235147] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.235411] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.235446] pnp 00:04: Plug and Play ACPI device, IDs LEN0042 PNP0f13 (active) [ 0.235703] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.235706] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.235708] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.235710] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.235713] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.235715] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.235717] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.235719] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.235722] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.235724] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.235726] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved [ 0.235729] system 00:05: [mem 0xdfa00000-0xdfa0ffff] has been reserved [ 0.235732] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.236400] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.236417] pnp: PnP ACPI: found 7 devices [ 0.243002] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.243034] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.243046] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.243051] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff] [ 0.243059] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.243064] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.243074] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.243076] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.243078] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.243081] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window] [ 0.243083] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.243085] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.243128] NET: Registered protocol family 2 [ 0.243345] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.243525] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.243669] TCP: Hash tables configured (established 65536 bind 65536) [ 0.243701] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.243734] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.243807] NET: Registered protocol family 1 [ 0.243824] pci 0000:00:02.0: Video device with shadowed ROM [ 0.243917] PCI: CLS 64 bytes, default 64 [ 0.243967] Trying to unpack rootfs image as initramfs... [ 1.007667] Freeing initrd memory: 35316K (ffff880033af6000 - ffff880035d73000) [ 1.007688] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.007691] software IO TLB [mem 0xd739e000-0xdb39e000] (64MB) mapped at [ffff8800d739e000-ffff8800db39dfff] [ 1.007766] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 1.007768] hw unit of domain pp0-core 2^-14 Joules [ 1.007769] hw unit of domain package 2^-14 Joules [ 1.007770] hw unit of domain dram 2^-14 Joules [ 1.007771] hw unit of domain pp1-gpu 2^-14 Joules [ 1.007940] Scanning for low memory corruption every 60 seconds [ 1.008374] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.008411] audit: initializing netlink subsys (disabled) [ 1.008429] audit: type=2000 audit(1462326710.996:1): initialized [ 1.009013] Initialise system trusted keyring [ 1.009144] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.009146] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.011065] zbud: loaded [ 1.011339] VFS: Disk quotas dquot_6.6.0 [ 1.011381] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.011996] fuse init (API version 7.23) [ 1.012161] Key type big_key registered [ 1.012565] Key type asymmetric registered [ 1.012570] Asymmetric key parser 'x509' registered [ 1.012616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.012655] io scheduler noop registered [ 1.012660] io scheduler deadline registered (default) [ 1.012698] io scheduler cfq registered [ 1.013186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.013195] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.013228] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.013229] vesafb: scrolling: redraw [ 1.013231] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.013245] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k [ 1.013371] Console: switching to colour frame buffer device 240x67 [ 1.013402] fb0: VESA VGA frame buffer device [ 1.013422] intel_idle: MWAIT substates: 0x11142120 [ 1.013423] intel_idle: v0.4.1 model 0x45 [ 1.013425] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.014088] ACPI: AC Adapter [AC] (on-line) [ 1.014172] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.014177] ACPI: Power Button [PWRB] [ 1.014221] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.014414] ACPI: Lid Switch [LID0] [ 1.014468] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.014471] ACPI: Power Button [PWRF] [ 1.014812] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20150930/evregion-297) [ 1.014818] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff8802168c1ed8), AE_BAD_PARAMETER (20150930/psparse-542) [ 1.014857] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20150930/evregion-297) [ 1.014861] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff8802168c1ed8), AE_BAD_PARAMETER (20150930/psparse-542) [ 1.014909] GHES: HEST is not enabled! [ 1.015060] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.016940] Linux agpgart interface v0.103 [ 1.027394] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) [ 1.079134] brd: module loaded [ 1.080449] loop: module loaded [ 1.080707] libphy: Fixed MDIO Bus: probed [ 1.080713] tun: Universal TUN/TAP device driver, 1.6 [ 1.080714] tun: (C) 1999-2004 Max Krasnyansky [ 1.080759] PPP generic driver version 2.4.2 [ 1.080829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.080836] ehci-pci: EHCI PCI platform driver [ 1.080972] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.080979] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.080991] ehci-pci 0000:00:1d.0: debug port 2 [ 1.084888] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.084901] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf061d000 [ 1.095324] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.095367] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.095370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.095372] usb usb1: Product: EHCI Host Controller [ 1.095373] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd [ 1.095375] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.095510] hub 1-0:1.0: USB hub found [ 1.095515] hub 1-0:1.0: 3 ports detected [ 1.095679] ehci-platform: EHCI generic platform driver [ 1.095695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.095702] ohci-pci: OHCI PCI platform driver [ 1.095715] ohci-platform: OHCI generic platform driver [ 1.095727] uhci_hcd: USB Universal Host Controller Interface driver [ 1.095832] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.095834] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 1.095855] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.095861] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.096929] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 1.096934] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.097010] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.097012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.097014] usb usb2: Product: xHCI Host Controller [ 1.097016] usb usb2: Manufacturer: Linux 4.4.0-21-generic xhci-hcd [ 1.097017] usb usb2: SerialNumber: 0000:00:14.0 [ 1.097140] hub 2-0:1.0: USB hub found [ 1.097150] hub 2-0:1.0: 9 ports detected [ 1.099571] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.099576] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.099605] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.099607] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.099609] usb usb3: Product: xHCI Host Controller [ 1.099611] usb usb3: Manufacturer: Linux 4.4.0-21-generic xhci-hcd [ 1.099613] usb usb3: SerialNumber: 0000:00:14.0 [ 1.099736] hub 3-0:1.0: USB hub found [ 1.099743] hub 3-0:1.0: 4 ports detected [ 1.100666] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.120370] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.120376] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.120619] mousedev: PS/2 mouse device common for all mice [ 1.121173] rtc_cmos 00:01: RTC can wake from S4 [ 1.121447] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.121508] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.121521] i2c /dev entries driver [ 1.121595] device-mapper: uevent: version 1.0.3 [ 1.121727] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.121745] Intel P-state driver initializing. [ 1.122047] ledtrig-cpu: registered to indicate activity on CPUs [ 1.122934] NET: Registered protocol family 10 [ 1.123402] NET: Registered protocol family 17 [ 1.123434] Key type dns_resolver registered [ 1.123849] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1d [ 1.123867] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1d [ 1.123888] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1d [ 1.123907] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1d [ 1.123998] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.124343] registered taskstats version 1 [ 1.124394] Loading compiled-in X.509 certificates [ 1.126645] Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244' [ 1.126686] zswap: loaded using pool lzo/zbud [ 1.129213] Key type trusted registered [ 1.132482] Key type encrypted registered [ 1.132489] AppArmor: AppArmor sha1 policy hashing enabled [ 1.142199] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.251466] evm: HMAC attrs: 0x1 [ 1.252108] Magic number: 0:734:861 [ 1.252243] rtc_cmos 00:01: setting system clock to 2016-05-04 01:51:52 UTC (1462326712) [ 1.252369] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.252370] EDD information not available. [ 1.252469] PM: Hibernation image not present or could not be loaded. [ 1.280983] ACPI: Battery Slot [BAT0] (battery present) [ 1.282320] Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000) [ 1.282322] Write protecting the kernel read-only data: 14336k [ 1.282766] Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000) [ 1.283207] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000) [ 1.295726] random: systemd-udevd urandom read with 13 bits of entropy available [ 1.317179] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.325071] wmi: Mapper loaded [ 1.328542] rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41 [ 1.331126] ahci 0000:00:1f.2: version 3.0 [ 1.331249] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.331556] [drm] Initialized drm 1.1.0 20060810 [ 1.343348] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 1.343353] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 1.343940] scsi host0: ahci [ 1.344024] scsi host1: ahci [ 1.344093] scsi host2: ahci [ 1.344158] scsi host3: ahci [ 1.344195] ata1: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c100 irq 42 [ 1.344197] ata2: DUMMY [ 1.344198] ata3: DUMMY [ 1.344198] ata4: DUMMY [ 1.356457] [drm] Memory usable by graphics device = 2048M [ 1.356461] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 1.356462] fb: switching to inteldrmfb from VESA VGA [ 1.356484] Console: switching to colour dummy device 80x25 [ 1.356547] [drm] Replacing VGA console driver [ 1.362774] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.362776] [drm] Driver supports precise vblank timestamp query. [ 1.363180] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.387727] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.388038] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.388105] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.394465] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 1.403529] [drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* failed to update link training [ 1.407353] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.411390] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 1.411523] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.535528] fbcon: inteldrmfb (fb0) is primary device [ 1.535651] Console: switching to colour frame buffer device 240x67 [ 1.535703] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.539751] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.539754] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.539993] hub 1-1:1.0: USB hub found [ 1.540082] hub 1-1:1.0: 8 ports detected [ 1.541184] usb 2-3: New USB device found, idVendor=2109, idProduct=2812 [ 1.541187] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.541188] usb 2-3: Product: OneLink Pro Dock [ 1.541189] usb 2-3: Manufacturer: LENOVO [ 1.541663] hub 2-3:1.0: USB hub found [ 1.541770] hub 2-3:1.0: 4 ports detected [ 1.659719] usb 3-3: New USB device found, idVendor=2109, idProduct=0812 [ 1.659723] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.659726] usb 3-3: Product: OneLink Pro Dock [ 1.659727] usb 3-3: Manufacturer: LENOVO [ 1.663401] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.666482] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.666487] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.666516] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.666735] ata1.00: supports DRM functions and may not be fully accessible [ 1.666866] ata1.00: disabling queued TRIM support [ 1.666868] ata1.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133 [ 1.666870] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.668231] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.668234] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.668248] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.668446] ata1.00: supports DRM functions and may not be fully accessible [ 1.668573] ata1.00: disabling queued TRIM support [ 1.668654] ata1.00: configured for UDMA/133 [ 1.668868] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 1.669137] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.669181] sd 0:0:0:0: [sda] Write Protect is off [ 1.669186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.669192] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.669200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.669634] sda: sda1 sda2 [ 1.669689] sda: p2 size 15624881 extends beyond EOD, enabling native capacity [ 1.670055] sda: sda1 sda2 [ 1.670109] sda: p2 size 15624881 extends beyond EOD, truncated [ 1.670283] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.715401] usb 2-4: new full-speed USB device number 3 using xhci_hcd [ 1.811404] usb 1-1.7: new full-speed USB device number 3 using ehci-pci [ 1.844555] usb 2-4: New USB device found, idVendor=8087, idProduct=07dc [ 1.844559] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.862132] hub 3-3:1.0: USB hub found [ 1.862290] hub 3-3:1.0: 4 ports detected [ 1.905892] usb 1-1.7: New USB device found, idVendor=0483, idProduct=91d1 [ 1.905896] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.905898] usb 1-1.7: Product: ST_SENSOR_HUB [ 1.905900] usb 1-1.7: Manufacturer: STMicroelectronics [ 1.905902] usb 1-1.7: SerialNumber: ST_SENSOR_HUB [ 1.909585] hidraw: raw HID events driver (C) Jiri Kosina [ 1.918152] usbcore: registered new interface driver usbhid [ 1.918155] usbhid: USB HID core driver [ 1.927365] usb 2-3.1: new high-speed USB device number 4 using xhci_hcd [ 1.975427] usb 1-1.8: new full-speed USB device number 4 using ehci-pci [ 2.007426] tsc: Refined TSC clocksource calibration: 2394.457 MHz [ 2.007431] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns [ 2.030320] usb 2-3.1: New USB device found, idVendor=2109, idProduct=2812 [ 2.030325] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030327] usb 2-3.1: Product: OneLink Pro Dock [ 2.030329] usb 2-3.1: Manufacturer: LENOVO [ 2.069857] usb 1-1.8: New USB device found, idVendor=056a, idProduct=00ec [ 2.069861] usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.069863] usb 1-1.8: Product: ISD-V4 [ 2.069865] usb 1-1.8: Manufacturer: Tablet [ 2.075037] input: Wacom ISDv4 EC Pen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/0003:056A:00EC.0002/input/input7 [ 2.075135] wacom 0003:056A:00EC.0002: hidraw0: USB HID v1.10 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.8/input0 [ 2.166159] hub 2-3.1:1.0: USB hub found [ 2.166479] hub 2-3.1:1.0: 4 ports detected [ 2.195434] usb 2-5: new full-speed USB device number 5 using xhci_hcd [ 2.325554] usb 2-5: New USB device found, idVendor=04f3, idProduct=0254 [ 2.325559] usb 2-5: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 2.325561] usb 2-5: Product: Touchscreen [ 2.325563] usb 2-5: Manufacturer: ELAN [ 2.325795] usb 2-5: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.335672] usb 3-3.1: new SuperSpeed USB device number 3 using xhci_hcd [ 2.357471] psmouse serio1: synaptics: queried max coordinates: x [..5708], y [..4698] [ 2.407442] usb 2-3.2: new high-speed USB device number 6 using xhci_hcd [ 2.410170] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..] [ 2.410177] psmouse serio1: synaptics: quirked min/max coordinates: x [1232..5710], y [1156..4696] [ 2.505030] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x12f800/0x0, board id: 2911, fw id: 2560 [ 2.505041] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.507687] usb 2-3.2: New USB device found, idVendor=1a40, idProduct=0101 [ 2.507691] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.507693] usb 2-3.2: Product: USB 2.0 Hub [ 2.508291] hub 2-3.2:1.0: USB hub found [ 2.508316] hub 2-3.2:1.0: 4 ports detected [ 2.564006] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.584285] usb 3-3.1: New USB device found, idVendor=2109, idProduct=0812 [ 2.584289] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.584292] usb 3-3.1: Product: OneLink Pro Dock [ 2.584293] usb 3-3.1: Manufacturer: LENOVO [ 2.586693] hub 3-3.1:1.0: USB hub found [ 2.586842] hub 3-3.1:1.0: 4 ports detected [ 2.619450] usb 2-6: new high-speed USB device number 7 using xhci_hcd [ 2.759641] usb 2-6: New USB device found, idVendor=5986, idProduct=029d [ 2.759645] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.759647] usb 2-6: Product: Integrated Camera [ 2.759649] usb 2-6: Manufacturer: Vimicro corp. [ 2.831421] usb 2-3.1.4: new full-speed USB device number 8 using xhci_hcd [ 2.937462] usb 2-3.1.4: config 1 interface 1 altsetting 1 has 2 endpoint descriptors, different from the interface descriptor's value: 1 [ 2.939996] usb 2-3.1.4: New USB device found, idVendor=17ef, idProduct=304e [ 2.939999] usb 2-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.940002] usb 2-3.1.4: Product: ThinkPad OneLink Pro Dock Audio [ 2.940004] usb 2-3.1.4: Manufacturer: C-Media Electronics Inc. [ 2.945603] input: C-Media Electronics Inc. ThinkPad OneLink Pro Dock Audio as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.4/2-3.1.4:1.3/0003:17EF:304E.0004/input/input11 [ 2.945716] hid-generic 0003:17EF:304E.0004: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc. ThinkPad OneLink Pro Dock Audio] on usb-0000:00:14.0-3.1.4/input3 [ 2.959422] usb 3-3.1.3: new SuperSpeed USB device number 4 using xhci_hcd [ 2.976495] usb 3-3.1.3: New USB device found, idVendor=17ef, idProduct=304f [ 2.976500] usb 3-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.976502] usb 3-3.1.3: Product: ThinkPad Dock Giga [ 2.976504] usb 3-3.1.3: Manufacturer: Lenovo [ 2.976505] usb 3-3.1.3: SerialNumber: 0050B67DC4B4 [ 3.003436] usb 2-3.2.1: new high-speed USB device number 9 using xhci_hcd [ 3.007594] clocksource: Switched to clocksource tsc [ 3.091632] usb 2-3.2.1: New USB device found, idVendor=0424, idProduct=2514 [ 3.091637] usb 2-3.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.092203] hub 2-3.2.1:1.0: USB hub found [ 3.092227] hub 2-3.2.1:1.0: 3 ports detected [ 3.179440] usb 2-3.2.2: new full-speed USB device number 10 using xhci_hcd [ 3.289185] usb 2-3.2.2: New USB device found, idVendor=045e, idProduct=07a5 [ 3.289189] usb 2-3.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.289192] usb 2-3.2.2: Product: Microsoft® 2.4GHz Transceiver v9.0 [ 3.289194] usb 2-3.2.2: Manufacturer: Microsoft [ 3.294909] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/0003:045E:07A5.0005/input/input12 [ 3.347656] hid-generic 0003:045E:07A5.0005: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-3.2.2/input0 [ 3.352192] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.1/0003:045E:07A5.0006/input/input13 [ 3.352337] hid-generic 0003:045E:07A5.0006: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-3.2.2/input1 [ 3.363433] usb 2-3.2.1.1: new high-speed USB device number 11 using xhci_hcd [ 3.369964] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.2/0003:045E:07A5.0007/input/input14 [ 3.423643] hid-generic 0003:045E:07A5.0007: input,hidraw4: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-3.2.2/input2 [ 3.451628] usb 2-3.2.1.1: New USB device found, idVendor=0424, idProduct=2640 [ 3.451632] usb 2-3.2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.452256] hub 2-3.2.1.1:1.0: USB hub found [ 3.452312] hub 2-3.2.1.1:1.0: 3 ports detected [ 3.539482] usb 2-3.2.1.3: new low-speed USB device number 12 using xhci_hcd [ 3.632773] usb 2-3.2.1.3: New USB device found, idVendor=046d, idProduct=c408 [ 3.632778] usb 2-3.2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.632780] usb 2-3.2.1.3: Product: USB Trackball [ 3.632782] usb 2-3.2.1.3: Manufacturer: Logitech [ 3.632984] usb 2-3.2.1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.636753] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1.3/2-3.2.1.3:1.0/0003:046D:C408.0008/input/input15 [ 3.636995] hid-generic 0003:046D:C408.0008: input,hidraw5: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:14.0-3.2.1.3/input0 [ 3.723421] usb 2-3.2.1.1.1: new high-speed USB device number 13 using xhci_hcd [ 3.854560] usb 2-3.2.1.1.1: New USB device found, idVendor=0424, idProduct=4063 [ 3.854564] usb 2-3.2.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.854567] usb 2-3.2.1.1.1: Product: Ultra Fast Media Reader [ 3.854569] usb 2-3.2.1.1.1: Manufacturer: Generic [ 3.854570] usb 2-3.2.1.1.1: SerialNumber: 000000264001 [ 3.858740] usb-storage 2-3.2.1.1.1:1.0: USB Mass Storage device detected [ 3.859117] scsi host4: usb-storage 2-3.2.1.1.1:1.0 [ 3.859180] usbcore: registered new interface driver usb-storage [ 3.860383] usbcore: registered new interface driver uas [ 4.016899] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.083510] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.083651] systemd[1]: Detected architecture x86-64. [ 4.083804] systemd[1]: Set hostname to . [ 4.155834] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.156025] systemd[1]: Created slice User and Session Slice. [ 4.156101] systemd[1]: Listening on Journal Audit Socket. [ 4.156114] systemd[1]: Reached target Encrypted Volumes. [ 4.156154] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.156164] systemd[1]: Reached target User and Group Name Lookups. [ 4.156173] systemd[1]: Reached target Remote File Systems (Pre). [ 4.156181] systemd[1]: Reached target Remote File Systems. [ 4.156217] systemd[1]: Listening on udev Control Socket. [ 4.156264] systemd[1]: Listening on Journal Socket. [ 4.156300] systemd[1]: Listening on udev Kernel Socket. [ 4.156324] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.156344] systemd[1]: Listening on Syslog Socket. [ 4.156371] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.156494] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.156587] systemd[1]: Created slice System Slice. [ 4.167668] systemd[1]: Starting Braille Device Support... [ 4.168261] systemd[1]: Started Read required files in advance. [ 4.170424] systemd[1]: Starting Load Kernel Modules... [ 4.170453] systemd[1]: Reached target Slices. [ 4.170919] systemd[1]: Mounting POSIX Message Queue File System... [ 4.171082] systemd[1]: Created slice system-getty.slice. [ 4.171660] systemd[1]: Starting Journal Service... [ 4.172161] systemd[1]: Mounting Debug File System... [ 4.172686] systemd[1]: Starting Uncomplicated firewall... [ 4.175494] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.176093] systemd[1]: Mounting Huge Pages File System... [ 4.180373] systemd[1]: Started Uncomplicated firewall. [ 4.180595] systemd[1]: Mounted POSIX Message Queue File System. [ 4.180735] systemd[1]: Mounted Debug File System. [ 4.180878] systemd[1]: Mounted Huge Pages File System. [ 4.183342] lp: driver loaded but no devices found [ 4.185260] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 4.186132] ppdev: user-space parallel port driver [ 4.190778] systemd[1]: Started Load Kernel Modules. [ 4.231642] systemd[1]: Mounting FUSE Control File System... [ 4.232381] systemd[1]: Starting Apply Kernel Variables... [ 4.233159] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.234539] systemd[1]: Mounted FUSE Control File System. [ 4.234694] systemd[1]: Started Journal Service. [ 4.272282] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.331957] systemd-journald[301]: Received request to flush runtime journal from PID 1 [ 4.400123] audit: type=1400 audit(1462326715.643:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=473 comm="apparmor_parser" [ 4.400133] audit: type=1400 audit(1462326715.643:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=473 comm="apparmor_parser" [ 4.400181] audit: type=1400 audit(1462326715.643:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=477 comm="apparmor_parser" [ 4.401453] audit: type=1400 audit(1462326715.643:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=474 comm="apparmor_parser" [ 4.401461] audit: type=1400 audit(1462326715.643:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=474 comm="apparmor_parser" [ 4.401466] audit: type=1400 audit(1462326715.643:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=474 comm="apparmor_parser" [ 4.401471] audit: type=1400 audit(1462326715.643:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=474 comm="apparmor_parser" [ 4.401676] audit: type=1400 audit(1462326715.643:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=480 comm="apparmor_parser" [ 4.404004] audit: type=1400 audit(1462326715.647:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=482 comm="apparmor_parser" [ 4.407411] random: nonblocking pool is initialized [ 4.560575] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.569535] Non-volatile memory driver v1.3 [ 4.585669] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 4.585672] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.585674] thinkpad_acpi: ThinkPad BIOS GQET48WW (1.28 ), EC unknown [ 4.585676] thinkpad_acpi: Lenovo ThinkPad S1 Yoga, model 20C0S1CWAU [ 4.586701] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 4.586746] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.586748] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.589459] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.607665] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 4.616612] Bluetooth: Core ver 2.21 [ 4.616626] NET: Registered protocol family 31 [ 4.616628] Bluetooth: HCI device and connection manager initialized [ 4.616631] Bluetooth: HCI socket layer initialized [ 4.616635] Bluetooth: L2CAP socket layer initialized [ 4.616640] Bluetooth: SCO socket layer initialized [ 4.616756] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input16 [ 4.621261] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.631105] Intel(R) Wireless WiFi driver for Linux [ 4.631109] Copyright(c) 2003- 2015 Intel Corporation [ 4.635937] media: Linux media interface: v0.10 [ 4.636025] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2 [ 4.640704] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing. [ 4.641009] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 4.641013] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.641016] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 4.641018] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0 [ 4.641020] snd_hda_codec_conexant hdaudioC1D0: inputs: [ 4.641023] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a [ 4.641026] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19 [ 4.641801] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication [ 4.642621] iwlwifi 0000:04:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm [ 4.646630] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 4.646749] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 4.649520] usbcore: registered new interface driver btusb [ 4.649663] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 4.649744] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 4.649817] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 4.665549] Linux video capture interface: v2.00 [ 4.665730] Bluetooth: hci0: read Intel version: 370710018002030d55 [ 4.665733] Bluetooth: hci0: Intel device is already patched. patch num: 55 [ 4.667616] usbcore: registered new interface driver snd-usb-audio [ 4.681106] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 4.681774] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 4.682092] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 4.689998] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:029d) [ 4.691670] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input22 [ 4.691755] usbcore: registered new interface driver uvcvideo [ 4.691757] USB Video Class driver (1.1.1) [ 4.703342] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:04F3:0254.0003/input/input23 [ 4.717753] hid-multitouch 0003:04F3:0254.0003: input,hiddev0,hidraw6: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-5/input0 [ 4.723147] AVX2 version of gcm_enc/dec engaged. [ 4.723149] AES CTR mode by8 optimization enabled [ 4.742950] Adding 7812436k swap on /dev/sda2. Priority:-1 extents:1 across:7812436k SSFS [ 4.766683] usbcore: registered new interface driver r8152 [ 4.771849] usbcore: registered new interface driver cdc_ether [ 4.771927] intel_rapl: Found RAPL domain package [ 4.771938] intel_rapl: Found RAPL domain core [ 4.771941] intel_rapl: Found RAPL domain uncore [ 4.771943] intel_rapl: Found RAPL domain dram [ 4.801555] cgroup: new mount options do not match the existing superblock, will be ignored [ 4.845728] usb 3-3.1.3: reset SuperSpeed USB device number 4 using xhci_hcd [ 4.862906] scsi 4:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0 [ 4.864005] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 4.879058] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 4.890203] r8152 3-3.1.3:1.0 eth0: v1.08.2 [ 4.898481] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 4.964742] cfg80211: World regulatory domain updated: [ 4.964746] cfg80211: DFS Master region: unset [ 4.964748] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.964751] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.964754] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.964756] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 4.964759] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.964762] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4.964764] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 4.964767] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 4.964769] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 4.988084] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 5.051504] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.051508] Bluetooth: BNEP filters: protocol multicast [ 5.051512] Bluetooth: BNEP socket layer initialized [ 5.372842] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5.372940] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.373176] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.576529] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.576769] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5.592858] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5.716745] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 5.731717] vboxdrv: Found 4 processor cores [ 5.755702] vboxdrv: TSC mode is Invariant, tentative frequency 2394450975 Hz [ 5.755706] vboxdrv: Successfully loaded version 5.0.18_Ubuntu (interface 0x00240000) [ 5.764139] VBoxNetFlt: Successfully started. [ 5.771624] VBoxNetAdp: Successfully started. [ 5.782202] VBoxPciLinuxInit [ 5.784865] vboxpci: IOMMU not found (not registered) [ 5.985082] r8152 3-3.1.3:1.0 enx0050b67dc4b4: renamed from eth0 [ 6.005495] IPv6: ADDRCONF(NETDEV_UP): enx0050b67dc4b4: link is not ready [ 6.051564] IPv6: ADDRCONF(NETDEV_UP): enx0050b67dc4b4: link is not ready [ 6.054611] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.068875] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.085794] Ebtables v2.0 registered [ 6.316378] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 6.399686] device virbr0-nic entered promiscuous mode [ 6.590882] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 6.717529] virbr0: port 1(virbr0-nic) entered listening state [ 6.717543] virbr0: port 1(virbr0-nic) entered listening state [ 6.833431] virbr0: port 1(virbr0-nic) entered disabled state [ 6.836772] device virbr0-nic left promiscuous mode [ 6.836794] virbr0: port 1(virbr0-nic) entered disabled state [ 7.056606] Bluetooth: RFCOMM TTY layer initialized [ 7.056614] Bluetooth: RFCOMM socket layer initialized [ 7.056619] Bluetooth: RFCOMM ver 1.11 [ 9.144987] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 9.476888] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10 [ 9.788852] IPv6: ADDRCONF(NETDEV_CHANGE): enx0050b67dc4b4: link becomes ready [ 642.434680] mmc0: cannot verify signal voltage switch [ 642.582172] mmc0: new ultra high speed SDR50 SDHC card at address 0001 [ 642.595056] mmcblk0: mmc0:0001 00000 3.72 GiB [ 642.596547] mmcblk0: p1 [ 642.776111] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 667.878158] mmc0: card 0001 removed [ 1485.809504] usb 2-1: new high-speed USB device number 14 using xhci_hcd [ 1485.938055] usb 2-1: New USB device found, idVendor=0781, idProduct=5576 [ 1485.938059] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1485.938062] usb 2-1: Product: Cruzer Facet [ 1485.938064] usb 2-1: Manufacturer: SanDisk [ 1485.938065] usb 2-1: SerialNumber: 4C530006960731104043 [ 1485.939653] usb-storage 2-1:1.0: USB Mass Storage device detected [ 1485.939820] scsi host5: usb-storage 2-1:1.0 [ 1486.938346] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Facet 1.00 PQ: 0 ANSI: 6 [ 1486.938847] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1486.938893] sd 5:0:0:0: [sdc] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 1486.939661] sd 5:0:0:0: [sdc] Write Protect is off [ 1486.939668] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 1486.940030] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1486.949339] sdc: sdc1 [ 1486.951053] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 1583.712575] usb 2-1: USB disconnect, device number 14 [ 5927.227581] usb 2-3: USB disconnect, device number 2 [ 5927.227590] usb 2-3.1: USB disconnect, device number 4 [ 5927.227595] usb 2-3.1.4: USB disconnect, device number 8 [ 5927.254687] usb 2-3.2: USB disconnect, device number 6 [ 5927.254699] usb 2-3.2.1: USB disconnect, device number 9 [ 5927.254708] usb 2-3.2.1.1: USB disconnect, device number 11 [ 5927.254716] usb 2-3.2.1.1.1: USB disconnect, device number 13 [ 5927.258553] usb 3-3: USB disconnect, device number 2 [ 5927.258566] usb 3-3.1: USB disconnect, device number 3 [ 5927.258574] usb 3-3.1.3: USB disconnect, device number 4 [ 5927.332865] usb 2-3.2.1.3: USB disconnect, device number 12 [ 5927.376654] usb 2-3.2.2: USB disconnect, device number 10 [ 5957.838120] PM: Syncing filesystems ... done. [ 5957.892171] PM: Preparing system for sleep (mem) [ 5957.895826] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 5957.898088] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5957.899429] PM: Suspending system (mem) [ 5957.899452] Suspending console(s) (use no_console_suspend to debug) [ 5958.083342] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5958.085203] sd 0:0:0:0: [sda] Stopping disk [ 5958.455944] PM: suspend of devices complete after 556.309 msecs [ 5958.479905] PM: late suspend of devices complete after 23.957 msecs [ 5958.952898] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 5958.968251] PM: noirq suspend of devices complete after 488.329 msecs [ 5958.968598] ACPI: Preparing to enter system sleep state S3 [ 5959.095934] ACPI : EC: EC stopped [ 5959.095934] PM: Saving platform NVS memory [ 5959.095940] Disabling non-boot CPUs ... [ 5959.096226] Broke affinity for irq 23 [ 5959.096229] Broke affinity for irq 40 [ 5959.096233] Broke affinity for irq 43 [ 5959.097261] smpboot: CPU 1 is now offline [ 5959.108584] Broke affinity for irq 23 [ 5959.108588] Broke affinity for irq 40 [ 5959.108591] Broke affinity for irq 43 [ 5959.108594] Broke affinity for irq 47 [ 5959.109623] smpboot: CPU 2 is now offline [ 5959.124477] Broke affinity for irq 1 [ 5959.124485] Broke affinity for irq 9 [ 5959.124489] Broke affinity for irq 12 [ 5959.124493] Broke affinity for irq 23 [ 5959.124495] Broke affinity for irq 40 [ 5959.124497] Broke affinity for irq 42 [ 5959.124498] Broke affinity for irq 43 [ 5959.124499] Broke affinity for irq 47 [ 5959.125519] smpboot: CPU 3 is now offline [ 5959.141807] ACPI: Low-level resume complete [ 5959.141875] ACPI : EC: EC started [ 5959.141876] PM: Restoring platform NVS memory [ 5959.142262] Enabling non-boot CPUs ... [ 5959.161939] x86: Booting SMP configuration: [ 5959.161940] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5959.165551] cache: parent cpu1 should not be sleeping [ 5959.165651] CPU1 is up [ 5959.181940] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 5959.185416] cache: parent cpu2 should not be sleeping [ 5959.185518] CPU2 is up [ 5959.201976] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 5959.205542] cache: parent cpu3 should not be sleeping [ 5959.205642] CPU3 is up [ 5959.208911] ACPI: Waking up from system sleep state S3 [ 5959.853853] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 5959.853944] PM: noirq resume of devices complete after 124.112 msecs [ 5959.860015] PM: early resume of devices complete after 6.051 msecs [ 5959.861143] rtc_cmos 00:01: System wakeup disabled by ACPI [ 5959.861966] sd 0:0:0:0: [sda] Starting disk [ 5959.897368] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 5960.089845] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci [ 5960.122021] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 5960.177864] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5960.180834] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5960.180837] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5960.180866] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 5960.181071] ata1.00: supports DRM functions and may not be fully accessible [ 5960.181222] ata1.00: disabling queued TRIM support [ 5960.182560] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5960.182562] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5960.182587] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 5960.182754] ata1.00: supports DRM functions and may not be fully accessible [ 5960.182882] ata1.00: disabling queued TRIM support [ 5960.182932] ata1.00: configured for UDMA/133 [ 5960.253865] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci [ 5960.362063] usb 2-6: reset high-speed USB device number 7 using xhci_hcd [ 5960.602032] usb 2-5: reset full-speed USB device number 5 using xhci_hcd [ 5960.731009] usb 2-5: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5960.739224] PM: resume of devices complete after 879.182 msecs [ 5960.739715] PM: Finishing wakeup. [ 5960.739717] Restarting tasks ... [ 5960.752187] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 5960.764874] done. [ 5960.796219] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 5960.810900] psmouse serio1: synaptics: queried max coordinates: x [..5708], y [..4698] [ 5960.863523] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..] [ 5960.863528] psmouse serio1: synaptics: quirked min/max coordinates: x [1232..5710], y [1156..4696] [ 5960.920187] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 5961.101760] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5961.102065] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5961.102302] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5961.298397] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5961.298646] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5961.314117] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5987.874280] PM: Syncing filesystems ... done. [ 5987.917336] PM: Preparing system for sleep (mem) [ 5987.917990] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 5987.920181] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5987.921569] PM: Suspending system (mem) [ 5987.921593] Suspending console(s) (use no_console_suspend to debug) [ 5988.101280] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5988.103164] sd 0:0:0:0: [sda] Stopping disk [ 5988.354860] PM: suspend of devices complete after 433.082 msecs [ 5988.378592] PM: late suspend of devices complete after 23.727 msecs [ 5988.379440] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 5988.394886] PM: noirq suspend of devices complete after 16.291 msecs [ 5988.395233] ACPI: Preparing to enter system sleep state S3 [ 5988.522601] ACPI : EC: EC stopped [ 5988.522601] PM: Saving platform NVS memory [ 5988.522608] Disabling non-boot CPUs ... [ 5988.522893] Broke affinity for irq 23 [ 5988.522900] Broke affinity for irq 43 [ 5988.523923] smpboot: CPU 1 is now offline [ 5988.535252] Broke affinity for irq 23 [ 5988.535258] Broke affinity for irq 43 [ 5988.535260] Broke affinity for irq 47 [ 5988.536284] smpboot: CPU 2 is now offline [ 5988.547151] Broke affinity for irq 1 [ 5988.547159] Broke affinity for irq 9 [ 5988.547163] Broke affinity for irq 12 [ 5988.547168] Broke affinity for irq 23 [ 5988.547170] Broke affinity for irq 40 [ 5988.547172] Broke affinity for irq 42 [ 5988.547173] Broke affinity for irq 43 [ 5988.547175] Broke affinity for irq 47 [ 5988.548195] smpboot: CPU 3 is now offline [ 5988.560455] ACPI: Low-level resume complete [ 5988.560525] ACPI : EC: EC started [ 5988.560526] PM: Restoring platform NVS memory [ 5988.560917] Enabling non-boot CPUs ... [ 5988.580575] x86: Booting SMP configuration: [ 5988.580576] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5988.584183] cache: parent cpu1 should not be sleeping [ 5988.584283] CPU1 is up [ 5988.600596] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 5988.604069] cache: parent cpu2 should not be sleeping [ 5988.604169] CPU2 is up [ 5988.620627] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 5988.624200] cache: parent cpu3 should not be sleeping [ 5988.624301] CPU3 is up [ 5988.627554] ACPI: Waking up from system sleep state S3 [ 5989.300505] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 5989.300582] PM: noirq resume of devices complete after 124.099 msecs [ 5989.306767] PM: early resume of devices complete after 6.163 msecs [ 5989.308024] rtc_cmos 00:01: System wakeup disabled by ACPI [ 5989.308536] sd 0:0:0:0: [sda] Starting disk [ 5989.344192] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 5989.359611] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 5989.536498] usb 1-1.8: reset full-speed USB device number 4 using ehci-pci [ 5989.584675] usb 2-6: reset high-speed USB device number 7 using xhci_hcd [ 5989.624515] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5989.627496] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5989.627499] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5989.627529] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 5989.627733] ata1.00: supports DRM functions and may not be fully accessible [ 5989.627884] ata1.00: disabling queued TRIM support [ 5989.629221] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5989.629224] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5989.629279] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 5989.629463] ata1.00: supports DRM functions and may not be fully accessible [ 5989.629590] ata1.00: disabling queued TRIM support [ 5989.629640] ata1.00: configured for UDMA/133 [ 5989.700511] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci [ 5989.824723] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 5990.064681] usb 2-5: reset full-speed USB device number 5 using xhci_hcd [ 5990.193659] usb 2-5: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5990.201874] PM: resume of devices complete after 895.080 msecs [ 5990.202346] PM: Finishing wakeup. [ 5990.202347] Restarting tasks ... [ 5990.215021] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 5990.215031] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 5990.229443] done. [ 5990.263291] psmouse serio1: synaptics: queried max coordinates: x [..5708], y [..4698] [ 5990.317729] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..] [ 5990.317736] psmouse serio1: synaptics: quirked min/max coordinates: x [1232..5710], y [1156..4696] [ 5990.345993] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 5990.522471] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 5990.522571] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5990.522806] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5990.712251] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5990.712533] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 5990.726942] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6006.949147] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6007.117690] Intel(R) Wireless WiFi driver for Linux [ 6007.117694] Copyright(c) 2003- 2015 Intel Corporation [ 6007.118411] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2 [ 6007.119035] iwlwifi 0000:04:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm [ 6007.129306] cfg80211: World regulatory domain updated: [ 6007.129310] cfg80211: DFS Master region: unset [ 6007.129311] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6007.129315] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6007.129317] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6007.129319] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6007.129321] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6007.129324] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6007.129326] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6007.129327] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6007.129329] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6007.140090] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 6007.140158] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6007.140393] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6007.340285] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6007.346893] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 6007.379865] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6007.379979] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6007.380220] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6007.576750] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6007.577015] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 6007.599698] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6007.655243] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6010.911640] wlp4s0: authenticate with 08:cc:68:cc:9a:7d [ 6010.914758] wlp4s0: send auth to 08:cc:68:cc:9a:7d (try 1/3) [ 6010.915220] wlp4s0: authenticated [ 6010.917219] wlp4s0: associate with 08:cc:68:cc:9a:7d (try 1/3) [ 6010.919773] wlp4s0: RX AssocResp from 08:cc:68:cc:9a:7d (capab=0x111 status=0 aid=48) [ 6010.920970] wlp4s0: associated [ 6010.921037] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 6010.929033] wlp4s0: Limiting TX power to 4 dBm as advertised by 08:cc:68:cc:9a:7d [ 6010.945287] cfg80211: Regulatory domain changed to country: AU [ 6010.945290] cfg80211: DFS Master region: ETSI [ 6010.945291] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6010.945294] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6010.945295] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 6010.945297] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s) [ 6010.945298] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s) [ 6010.945300] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 6341.273508] [drm] stuck on render ring [ 6341.274370] [drm] GPU HANG: ecode 7:0:0x85dffff8, in chrome [2896], reason: Ring hung, action: reset [ 6341.274373] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 6341.274374] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 6341.274375] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 6341.274376] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 6341.274377] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 6341.274395] ------------[ cut here ]------------ [ 6341.274444] WARNING: CPU: 0 PID: 6343 at /build/linux-Ay7j_C/linux-4.4.0/drivers/gpu/drm/i915/intel_display.c:11287 intel_mmio_flip_work_func+0x38e/0x3d0 [i915]() [ 6341.274447] WARN_ON(__i915_wait_request(mmio_flip->req, mmio_flip->crtc->reset_counter, false, NULL, &mmio_flip->i915->rps.mmioflips)) [ 6341.274449] Modules linked in: [ 6341.274451] ctr ccm iwlmvm mac80211 iwlwifi cfg80211 nls_iso8859_1 mmc_block drbg ansi_cprng rfcomm xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) bnep arc4 hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_als hid_sensor_gyro_3d hid_sensor_incl_3d hid_sensor_rotation hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common intel_rapl cdc_ether x86_pkg_temp_thermal usbnet intel_powerclamp r8152 mii coretemp crct10dif_pclmul crc32_pclmul aesni_intel aes_x86_64 [ 6341.274518] lrw gf128mul glue_helper ablk_helper cryptd hid_multitouch uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common serio_raw joydev input_leds snd_hda_codec_hdmi videodev snd_hda_codec_conexant snd_hda_codec_generic snd_usb_audio media snd_usbmidi_lib btusb btrtl btbcm snd_hda_intel btintel snd_hda_codec bluetooth snd_hda_core snd_hwdep mei_me mei thinkpad_acpi rtsx_pci_ms memstick nvram lpc_ich shpchp snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore mac_hid soc_button_array intel_smartconnect binfmt_misc kvm_intel kvm irqbypass parport_pc ppdev lp parport autofs4 uas usb_storage hid_generic wacom hid_sensor_custom hid_sensor_hub usbhid hid rtsx_pci_sdmmc i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect [ 6341.274602] sysimgblt fb_sys_fops psmouse ahci drm libahci rtsx_pci wmi fjes video [last unloaded: cfg80211] [ 6341.274616] CPU: 0 PID: 6343 Comm: kworker/0:1 Tainted: G OE 4.4.0-21-generic #37-Ubuntu [ 6341.274624] Hardware name: LENOVO 20C0S1CWAU/20C0S1CWAU, BIOS GQET48WW (1.28 ) 01/14/2016 [ 6341.274662] Workqueue: events intel_mmio_flip_work_func [i915] [ 6341.274669] 0000000000000286 00000000fbab6d2b ffff880214a8fd20 ffffffff813e93c3 [ 6341.274676] ffff880214a8fd68 ffffffffc0228a50 ffff880214a8fd58 ffffffff81080f62 [ 6341.274680] ffff88015ce28d00 ffff88021f216500 ffff88021f21ae00 0000000000000000 [ 6341.274685] Call Trace: [ 6341.274693] [] dump_stack+0x63/0x90 [ 6341.274701] [] warn_slowpath_common+0x82/0xc0 [ 6341.274705] [] warn_slowpath_fmt+0x5c/0x80 [ 6341.274711] [] ? __switch_to+0x420/0x5a0 [ 6341.274745] [] intel_mmio_flip_work_func+0x38e/0x3d0 [i915] [ 6341.274751] [] process_one_work+0x162/0x480 [ 6341.274766] [] worker_thread+0x4b/0x4c0 [ 6341.274770] [] ? process_one_work+0x480/0x480 [ 6341.274773] [] ? process_one_work+0x480/0x480 [ 6341.274777] [] kthread+0xd8/0xf0 [ 6341.274781] [] ? kthread_create_on_node+0x1e0/0x1e0 [ 6341.274787] [] ret_from_fork+0x3f/0x70 [ 6341.274791] [] ? kthread_create_on_node+0x1e0/0x1e0 [ 6341.274793] ---[ end trace 07653d7552ab6baa ]--- [ 6341.276515] drm/i915: Resetting chip after gpu hang