[ 34.546930] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 34.546935] bbswitch: Found discrete VGA device 0000:02:00.0: \_SB_.PCI0.PEG0.PEGP [ 34.546943] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [ 34.547002] bbswitch: detected an Optimus _DSM function [ 34.547009] bbswitch: Succesfully loaded. Discrete card 0000:02:00.0 is on [ 34.550258] [drm] Module unloaded [ 34.551314] bbswitch: disabling discrete graphics [ 34.551326] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [ 34.637012] ip_tables: (C) 2000-2006 Netfilter Core Team [ 34.648544] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 37.778370] wlan0: authenticate with b8:a3:86:64:f4:97 [ 37.781524] wlan0: send auth to b8:a3:86:64:f4:97 (try 1/3) [ 37.817997] wlan0: authenticated [ 37.819764] wlan0: associate with b8:a3:86:64:f4:97 (try 1/3) [ 37.824549] wlan0: RX AssocResp from b8:a3:86:64:f4:97 (capab=0x31 status=0 aid=1) [ 37.827048] wlan0: associated [ 37.827076] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 37.827124] cfg80211: Calling CRDA for country: US [ 37.829182] cfg80211: Regulatory domain changed to country: US [ 37.829185] cfg80211: DFS Master region: unset [ 37.829186] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 37.829188] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 37.829190] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A) [ 37.829191] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 37.829192] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 37.829194] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 37.829195] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 37.829196] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 37.846968] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by b8:a3:86:64:f4:97 [ 39.108958] init: plymouth-upstart-bridge main process ended, respawning [ 39.112470] init: plymouth-upstart-bridge main process (2521) terminated with status 1 [ 39.112479] init: plymouth-upstart-bridge main process ended, respawning [ 64.051375] audit_printk_skb: 136 callbacks suppressed [ 64.051377] audit: type=1400 audit(1436325318.371:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3242 comm="apparmor_parser" [ 64.051382] audit: type=1400 audit(1436325318.371:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3242 comm="apparmor_parser" [ 64.051618] audit: type=1400 audit(1436325318.371:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3242 comm="apparmor_parser" [ 83.879145] usb 3-2: new high-speed USB device number 5 using xhci_hcd [ 84.007947] usb 3-2: New USB device found, idVendor=8644, idProduct=8003 [ 84.007951] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 84.007953] usb 3-2: Product: USB Flash Disk [ 84.007955] usb 3-2: Manufacturer: General [ 84.007956] usb 3-2: SerialNumber: 040404000000C4E0 [ 84.016083] usb-storage 3-2:1.0: USB Mass Storage device detected [ 84.016209] scsi6 : usb-storage 3-2:1.0 [ 84.016265] usbcore: registered new interface driver usb-storage [ 84.018016] usbcore: registered new interface driver uas [ 85.014836] scsi 6:0:0:0: Direct-Access General USB Flash Disk 1.00 PQ: 0 ANSI: 2 [ 85.015133] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 85.015556] sd 6:0:0:0: [sdb] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 85.015821] sd 6:0:0:0: [sdb] Write Protect is off [ 85.015823] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 85.016063] sd 6:0:0:0: [sdb] No Caching mode page found [ 85.016066] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 85.018627] sdb: sdb1 [ 85.020675] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 100.001672] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 100.168033] systemd-hostnamed[3414]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 3793.189817] wlan0: deauthenticating from b8:a3:86:64:f4:97 by local choice (Reason: 3=DEAUTH_LEAVING) [ 3793.194926] cfg80211: Calling CRDA to update world regulatory domain [ 3793.196970] cfg80211: World regulatory domain updated: [ 3793.196973] cfg80211: DFS Master region: unset [ 3793.196975] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3793.196976] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3793.196978] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3793.196979] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3793.196980] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3793.196981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3793.347071] init: anacron main process (8752) killed by TERM signal [ 3793.408519] PM: Syncing filesystems ... done. [ 3793.417713] PM: Preparing system for mem sleep [ 3793.418041] bbswitch: enabling discrete graphics [ 3793.961770] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3793.963361] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3793.964504] PM: Entering mem sleep [ 3793.964869] Suspending console(s) (use no_console_suspend to debug) [ 3793.965235] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 3793.965469] sd 1:0:0:0: [sda] Stopping disk [ 3794.043718] Removing pn544 [ 3794.311091] PM: suspend of devices complete after 346.245 msecs [ 3794.325488] PM: late suspend of devices complete after 14.402 msecs [ 3794.326382] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 3794.326744] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 3794.326787] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 3794.341456] PM: noirq suspend of devices complete after 15.974 msecs [ 3794.341756] ACPI: Preparing to enter system sleep state S3 [ 3794.342150] PM: Saving platform NVS memory [ 3794.348098] Disabling non-boot CPUs ... [ 3794.348147] intel_pstate CPU 1 exiting [ 3794.349318] kvm: disabling virtualization on CPU1 [ 3794.449338] smpboot: CPU 1 is now offline [ 3794.449651] intel_pstate CPU 2 exiting [ 3794.450836] kvm: disabling virtualization on CPU2 [ 3794.553280] smpboot: CPU 2 is now offline [ 3794.553589] intel_pstate CPU 3 exiting [ 3794.554754] kvm: disabling virtualization on CPU3 [ 3794.657232] smpboot: CPU 3 is now offline [ 3794.657543] intel_pstate CPU 4 exiting [ 3794.658704] kvm: disabling virtualization on CPU4 [ 3794.761168] smpboot: CPU 4 is now offline [ 3794.761458] intel_pstate CPU 5 exiting [ 3794.761582] Broke affinity for irq 23 [ 3794.762590] kvm: disabling virtualization on CPU5 [ 3794.865108] smpboot: CPU 5 is now offline [ 3794.865393] intel_pstate CPU 6 exiting [ 3794.865513] Broke affinity for irq 16 [ 3794.866523] kvm: disabling virtualization on CPU6 [ 3794.969054] smpboot: CPU 6 is now offline [ 3794.969350] intel_pstate CPU 7 exiting [ 3794.969451] Broke affinity for irq 43 [ 3794.970456] kvm: disabling virtualization on CPU7 [ 3795.072994] smpboot: CPU 7 is now offline [ 3795.074709] ACPI: Low-level resume complete [ 3795.074752] PM: Restoring platform NVS memory [ 3795.076577] Enabling non-boot CPUs ... [ 3795.076620] x86: Booting SMP configuration: [ 3795.076621] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3795.088651] kvm: enabling virtualization on CPU1 [ 3795.090906] Intel pstate controlling: cpu 1 [ 3795.090960] CPU1 is up [ 3795.090981] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3795.103031] kvm: enabling virtualization on CPU2 [ 3795.105258] Intel pstate controlling: cpu 2 [ 3795.105307] CPU2 is up [ 3795.105326] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3795.117395] kvm: enabling virtualization on CPU3 [ 3795.119601] Intel pstate controlling: cpu 3 [ 3795.119650] CPU3 is up [ 3795.119670] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 3795.131734] kvm: enabling virtualization on CPU4 [ 3795.133901] Intel pstate controlling: cpu 4 [ 3795.133937] CPU4 is up [ 3795.133952] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 3795.145949] kvm: enabling virtualization on CPU5 [ 3795.148124] Intel pstate controlling: cpu 5 [ 3795.148173] CPU5 is up [ 3795.148190] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 3795.160214] kvm: enabling virtualization on CPU6 [ 3795.162449] Intel pstate controlling: cpu 6 [ 3795.162485] CPU6 is up [ 3795.162502] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 3795.174546] kvm: enabling virtualization on CPU7 [ 3795.176779] Intel pstate controlling: cpu 7 [ 3795.176815] CPU7 is up [ 3795.186925] ACPI: Waking up from system sleep state S3 [ 3795.187490] acpi LNXPOWER:01: Turning OFF [ 3795.188378] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 3795.188398] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 3795.188403] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 3795.201238] PM: noirq resume of devices complete after 13.731 msecs [ 3795.201630] PM: early resume of devices complete after 0.366 msecs [ 3795.201722] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 3795.201756] usb usb3: root hub lost power or was reset [ 3795.201757] usb usb4: root hub lost power or was reset [ 3795.201845] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 3795.201933] xhci_hcd 0000:00:14.0: irq 49 for MSI/MSI-X [ 3795.201977] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X [ 3795.203212] sd 1:0:0:0: [sda] Starting disk [ 3795.428066] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 3795.428073] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 3795.520001] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3795.524585] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3795.525737] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3795.526025] ata2.00: configured for UDMA/133 [ 3795.532011] usb 3-11: reset high-speed USB device number 4 using xhci_hcd [ 3795.689792] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880468e38e40 [ 3795.689793] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880468e38de0 [ 3795.827840] usb 3-2: reset high-speed USB device number 5 using xhci_hcd [ 3795.955923] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880461351600 [ 3795.955924] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880461351648 [ 3796.067709] usb 3-9: reset full-speed USB device number 3 using xhci_hcd [ 3796.196042] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046312ad00 [ 3796.196043] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046312ad48 [ 3796.196044] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88046312ad90 [ 3796.196045] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880469383c00 [ 3796.196046] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880469383c48 [ 3796.259773] psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4646] [ 3796.307694] usb 3-6: reset full-speed USB device number 2 using xhci_hcd [ 3796.325794] psmouse serio1: synaptics: queried min coordinates: x [1386..], y [1252..] [ 3796.435971] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804637cf300 [ 3796.435972] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804637cf348 [ 3796.441546] PM: resume of devices complete after 1240.603 msecs [ 3796.442252] PM: Finishing wakeup. [ 3796.442253] Restarting tasks ... done. [ 3796.454455] Bluetooth: hci0: read Intel version: 3707100180012d0d00 [ 3796.456206] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq [ 3796.495425] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 3796.519548] bbswitch: disabling discrete graphics [ 3796.519557] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [ 3797.177503] init: anacron main process (9195) killed by TERM signal [ 3797.216756] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled [ 3797.217010] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled [ 3797.229336] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3797.247004] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3804.433637] wlan0: authenticate with b8:a3:86:64:f4:97 [ 3804.436752] wlan0: send auth to b8:a3:86:64:f4:97 (try 1/3) [ 3804.473243] wlan0: authenticated [ 3804.475048] wlan0: associate with b8:a3:86:64:f4:97 (try 1/3) [ 3804.479557] wlan0: RX AssocResp from b8:a3:86:64:f4:97 (capab=0x31 status=0 aid=1) [ 3804.482059] wlan0: associated [ 3804.482090] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3804.482172] cfg80211: Calling CRDA for country: US [ 3804.484510] cfg80211: Regulatory domain changed to country: US [ 3804.484513] cfg80211: DFS Master region: unset [ 3804.484514] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3804.484517] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 3804.484519] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A) [ 3804.484520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 3804.484522] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 3804.484523] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 3804.484525] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 3804.484526] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 3804.492672] wlan0: deauthenticating from b8:a3:86:64:f4:97 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 3804.496131] wlan0: authenticate with b8:a3:86:64:f4:97 [ 3804.498619] wlan0: send auth to b8:a3:86:64:f4:97 (try 1/3) [ 3804.498865] cfg80211: Calling CRDA to update world regulatory domain [ 3804.500478] cfg80211: World regulatory domain updated: [ 3804.500480] cfg80211: DFS Master region: unset [ 3804.500481] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3804.500483] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3804.500484] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3804.500485] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3804.500486] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3804.500487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3804.537655] wlan0: authenticated [ 3804.538962] wlan0: associate with b8:a3:86:64:f4:97 (try 1/3) [ 3804.545527] wlan0: RX AssocResp from b8:a3:86:64:f4:97 (capab=0x31 status=0 aid=1) [ 3804.546383] wlan0: associated [ 3804.546435] cfg80211: Calling CRDA for country: US [ 3804.548163] cfg80211: Regulatory domain changed to country: US [ 3804.548165] cfg80211: DFS Master region: unset [ 3804.548166] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3804.548168] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 3804.548169] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A) [ 3804.548170] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 3804.548171] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 3804.548172] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s) [ 3804.548172] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 3804.548174] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 3804.629046] wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by b8:a3:86:64:f4:97