[   19.632121] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   19.632279] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.632863] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.635999] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   19.636606] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   19.735243] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[   19.735680] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[   19.764301] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.764777] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.666432] init: plymouth-upstart-bridge main process ended, respawning
[   23.177987] wlan0: authenticate with 00:8e:f2:b7:60:06
[   23.180137] wlan0: send auth to 00:8e:f2:b7:60:06 (try 1/3)
[   23.184946] wlan0: authenticated
[   23.185189] wlan0: waiting for beacon from 00:8e:f2:b7:60:06
[   23.240060] wlan0: associate with 00:8e:f2:b7:60:06 (try 1/3)
[   23.243661] wlan0: RX AssocResp from 00:8e:f2:b7:60:06 (capab=0x411 status=0 aid=6)
[   23.246795] wlan0: associated
[   23.246846] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.648401] init: anacron main process (877) killed by TERM signal
[   47.451178] audit_printk_skb: 150 callbacks suppressed
[   47.451184] type=1400 audit(1409480972.058:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2303 comm="apparmor_parser"
[   47.451196] type=1400 audit(1409480972.058:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2303 comm="apparmor_parser"
[   47.451947] type=1400 audit(1409480972.058:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2303 comm="apparmor_parser"
[ 1845.940296] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1846.233117] wlan0: deauthenticating from 00:8e:f2:b7:60:06 by local choice (reason=3)
[ 1846.243955] cfg80211: Calling CRDA to update world regulatory domain
[ 1846.248690] cfg80211: World regulatory domain updated:
[ 1846.248697] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1846.248702] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1846.248706] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1846.248709] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1846.248713] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1846.248717] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1847.036649] init: anacron main process (2654) killed by TERM signal
[ 1847.335664] PM: Syncing filesystems ... done.
[ 1847.509281] PM: Preparing system for mem sleep
[ 1847.509727] Freezing user space processes ... (elapsed 0.022 seconds) done.
[ 1847.532366] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1847.533575] PM: Entering mem sleep
[ 1847.533596] Suspending console(s) (use no_console_suspend to debug)
[ 1847.535380] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 1847.535983] sd 1:0:0:0: [sda] Stopping disk
[ 1848.580143] PM: suspend of devices complete after 1046.147 msecs
[ 1848.597330] PM: late suspend of devices complete after 17.181 msecs
[ 1848.612215] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 1848.628165] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 1848.628345] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 1848.644093] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 1848.644155] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 1848.644216] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 1848.644291] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 1848.676097] PM: noirq suspend of devices complete after 78.762 msecs
[ 1848.676783] ACPI: Preparing to enter system sleep state S3
[ 1848.677265] PM: Saving platform NVS memory
[ 1848.677334] Disabling non-boot CPUs ...
[ 1848.677874] Broke affinity for irq 46
[ 1848.780023] smpboot: CPU 1 is now offline
[ 1848.780268] ACPI: Low-level resume complete
[ 1848.780268] PM: Restoring platform NVS memory
[ 1848.780268] CPU0: Thermal monitoring handled by SMI
[ 1848.780268] Enabling non-boot CPUs ...
[ 1848.780268] x86: Booting SMP configuration:
[ 1848.780268] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1848.780268] CPU1: Thermal monitoring handled by SMI
[ 1848.796167] CPU1 is up
[ 1848.801054] ACPI: Waking up from system sleep state S3
[ 1848.836410] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 1848.836477] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 1848.836542] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 1848.852127] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 1848.868307] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 1848.884103] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1848.932332] PM: noirq resume of devices complete after 129.009 msecs
[ 1848.932855] PM: early resume of devices complete after 0.198 msecs
[ 1848.943516] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 1848.978183] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[ 1848.978305] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 1848.978347] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1848.980753] usb usb3: root hub lost power or was reset
[ 1848.980906] usb usb4: root hub lost power or was reset
[ 1848.981047] usb usb5: root hub lost power or was reset
[ 1848.981314] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 1848.981571] usb usb6: root hub lost power or was reset
[ 1848.981713] usb usb7: root hub lost power or was reset
[ 1848.982145] usb usb8: root hub lost power or was reset
[ 1848.982379] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 1848.982502] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1848.983512] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1849.228121] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[ 1849.312117] ata2: SATA link down (SStatus 4 SControl 300)
[ 1849.320133] ata5: SATA link down (SStatus 0 SControl 300)
[ 1849.508086] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 1849.752133] usb 7-2: reset full-speed USB device number 2 using uhci_hcd
[ 1849.776139] tpm_tis 00:09: TPM is disabled/deactivated (0x7)
[ 1851.048123] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1851.048936] ata1.00: unexpected _GTF length (8)
[ 1851.114485] ata1.00: unexpected _GTF length (8)
[ 1851.114658] ata1.00: configured for UDMA/100
[ 1851.128159] sd 1:0:0:0: [sda] Starting disk
[ 1851.167166] PM: resume of devices complete after 2234.305 msecs
[ 1851.167566] PM: Finishing wakeup.
[ 1851.167569] Restarting tasks ... done.
[ 1851.172707] video LNXVIDEO:00: Restoring backlight state
[ 1851.555186] init: anacron main process (2985) killed by TERM signal
[ 1851.556211] usb 3-2: USB disconnect, device number 2
[ 1851.796068] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[ 1851.914030] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1851.962353] usb 3-2: New USB device found, idVendor=0930, idProduct=0508
[ 1851.962366] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1852.016464] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1852.016703] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1852.019220] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 1852.022628] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 1852.052852] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1855.339454] wlan0: authenticate with 00:8e:f2:b7:60:06
[ 1855.342497] wlan0: send auth to 00:8e:f2:b7:60:06 (try 1/3)
[ 1855.347479] wlan0: authenticated
[ 1855.348148] wlan0: associate with 00:8e:f2:b7:60:06 (try 1/3)
[ 1855.351724] wlan0: RX AssocResp from 00:8e:f2:b7:60:06 (capab=0x411 status=0 aid=5)
[ 1855.366415] wlan0: associated
[ 1855.366476] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1971.528615] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1971.832730] wlan0: deauthenticating from 00:8e:f2:b7:60:06 by local choice (reason=3)
[ 1971.852046] cfg80211: Calling CRDA to update world regulatory domain
[ 1971.861119] cfg80211: World regulatory domain updated:
[ 1971.861126] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1971.861131] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1971.861135] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1971.861139] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1971.861142] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1971.861146] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1972.487719] init: anacron main process (3677) killed by TERM signal
[ 1972.896355] PM: Syncing filesystems ... done.
[ 1973.133184] PM: Preparing system for mem sleep
[ 1973.133593] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1973.135695] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1973.136991] PM: Entering mem sleep
[ 1973.137023] Suspending console(s) (use no_console_suspend to debug)
[ 1973.138808] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 1973.139045] sd 1:0:0:0: [sda] Stopping disk
[ 1973.240689] mei_me 0000:00:03.0: H_RDY is not cleared 0x80181818
[ 1974.204077] PM: suspend of devices complete after 1066.609 msecs
[ 1974.221236] PM: late suspend of devices complete after 17.151 msecs
[ 1974.236217] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 1974.252164] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 1974.252343] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 1974.268090] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 1974.268152] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 1974.268213] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 1974.268287] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 1974.300094] PM: noirq suspend of devices complete after 78.855 msecs
[ 1974.300778] ACPI: Preparing to enter system sleep state S3
[ 1974.301290] PM: Saving platform NVS memory
[ 1974.301362] Disabling non-boot CPUs ...
[ 1974.404023] smpboot: CPU 1 is now offline
[ 1974.404266] ACPI: Low-level resume complete
[ 1974.404266] PM: Restoring platform NVS memory
[ 1974.404266] CPU0: Thermal monitoring handled by SMI
[ 1974.404266] Enabling non-boot CPUs ...
[ 1974.404266] x86: Booting SMP configuration:
[ 1974.404266] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1974.404266] CPU1: Thermal monitoring handled by SMI
[ 1974.419940] CPU1 is up
[ 1974.425969] ACPI: Waking up from system sleep state S3
[ 1974.460726] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 1974.460794] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 1974.460859] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 1974.476468] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 1974.492299] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 1974.508103] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1974.556330] PM: noirq resume of devices complete after 127.356 msecs
[ 1974.556860] PM: early resume of devices complete after 0.483 msecs
[ 1974.568393] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 1974.606748] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[ 1974.607157] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 1974.607200] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1974.609636] usb usb3: root hub lost power or was reset
[ 1974.609788] usb usb4: root hub lost power or was reset
[ 1974.609930] usb usb5: root hub lost power or was reset
[ 1974.610196] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 1974.610452] usb usb6: root hub lost power or was reset
[ 1974.610592] usb usb7: root hub lost power or was reset
[ 1974.611040] usb usb8: root hub lost power or was reset
[ 1974.611326] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1974.612331] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1974.786379] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 1974.860278] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[ 1974.944132] ata2: SATA link down (SStatus 4 SControl 300)
[ 1974.948106] ata5: SATA link down (SStatus 0 SControl 300)
[ 1975.136058] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 1975.380154] usb 7-2: reset full-speed USB device number 2 using uhci_hcd
[ 1975.400143] tpm_tis 00:09: TPM is disabled/deactivated (0x7)
[ 1976.676115] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1976.676996] ata1.00: unexpected _GTF length (8)
[ 1976.736865] ata1.00: unexpected _GTF length (8)
[ 1976.737040] ata1.00: configured for UDMA/100
[ 1976.752094] sd 1:0:0:0: [sda] Starting disk
[ 1976.788198] PM: resume of devices complete after 2231.333 msecs
[ 1976.788584] PM: Finishing wakeup.
[ 1976.788587] Restarting tasks ... done.
[ 1976.800244] video LNXVIDEO:00: Restoring backlight state
[ 1977.168949] init: anacron main process (3898) killed by TERM signal
[ 1977.192399] usb 3-2: USB disconnect, device number 3
[ 1977.440138] usb 3-2: new full-speed USB device number 4 using uhci_hcd
[ 1977.519088] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1977.620434] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1977.620917] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1977.623521] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 1977.627021] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 1977.656900] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1981.048590] wlan0: authenticate with 00:8e:f2:b7:60:06
[ 1981.049701] wlan0: send auth to 00:8e:f2:b7:60:06 (try 1/3)
[ 1981.055264] wlan0: authenticated
[ 1981.056141] wlan0: associate with 00:8e:f2:b7:60:06 (try 1/3)
[ 1981.059718] wlan0: RX AssocResp from 00:8e:f2:b7:60:06 (capab=0x411 status=0 aid=5)
[ 1981.064243] wlan0: associated
[ 1981.064288] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1992.564421] usb 3-2: device descriptor read/64, error -110
[ 2007.792418] usb 3-2: device descriptor read/64, error -110
[ 2008.008298] usb 3-2: new full-speed USB device number 5 using uhci_hcd
[ 2008.174354] usb 3-2: New USB device found, idVendor=0930, idProduct=0508
[ 2008.174367] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2028.328623] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 2372.313701] type=1400 audit(1409514541.906:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4633 comm="apparmor_parser"
[ 2372.313717] type=1400 audit(1409514541.906:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4633 comm="apparmor_parser"
[ 2372.315057] type=1400 audit(1409514541.906:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4633 comm="apparmor_parser"
[ 4003.367902] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4003.367940] agpgart-intel 0000:00:00.0: no hotplug settings from platform
[ 4003.367947] agpgart-intel 0000:00:00.0: using default PCI settings
[ 4003.367962] i915 0000:00:02.0: no hotplug settings from platform
[ 4003.367968] i915 0000:00:02.0: using default PCI settings
[ 4003.367982] pci 0000:00:02.1: no hotplug settings from platform
[ 4003.367987] pci 0000:00:02.1: using default PCI settings
[ 4003.368001] mei_me 0000:00:03.0: no hotplug settings from platform
[ 4003.368044] mei_me 0000:00:03.0: using default PCI settings
[ 4003.368065] e1000e 0000:00:19.0: no hotplug settings from platform
[ 4003.368077] e1000e 0000:00:19.0: using default PCI settings
[ 4003.368102] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
[ 4003.368108] uhci_hcd 0000:00:1a.0: using default PCI settings
[ 4003.368125] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
[ 4003.368130] uhci_hcd 0000:00:1a.1: using default PCI settings
[ 4003.368149] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
[ 4003.368154] uhci_hcd 0000:00:1a.2: using default PCI settings
[ 4003.368173] ehci-pci 0000:00:1a.7: no hotplug settings from platform
[ 4003.368187] ehci-pci 0000:00:1a.7: using default PCI settings
[ 4003.368208] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4003.368218] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4003.368261] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 4003.368270] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 4003.368279] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
[ 4003.368285] uhci_hcd 0000:00:1d.0: using default PCI settings
[ 4003.368303] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
[ 4003.368308] uhci_hcd 0000:00:1d.1: using default PCI settings
[ 4003.368325] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
[ 4003.368331] uhci_hcd 0000:00:1d.2: using default PCI settings
[ 4003.368348] ehci-pci 0000:00:1d.7: no hotplug settings from platform
[ 4003.368354] ehci-pci 0000:00:1d.7: using default PCI settings
[ 4003.368376] pci 0000:00:1e.0: no hotplug settings from platform
[ 4003.368382] pci 0000:00:1e.0: using default PCI settings
[ 4003.368411] sdhci-pci 0000:04:0b.0: no hotplug settings from platform
[ 4003.368417] sdhci-pci 0000:04:0b.0: using default PCI settings
[ 4003.368435] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4003.368441] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4003.368460] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4003.368466] ahci 0000:00:1f.2: using default PCI settings
[ 4003.685657] wlan0: deauthenticating from 00:8e:f2:b7:60:06 by local choice (reason=3)
[ 4003.706704] cfg80211: Calling CRDA to update world regulatory domain
[ 4004.380930] cfg80211: World regulatory domain updated:
[ 4004.380937] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4004.380941] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4004.380946] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4004.380949] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4004.380953] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4004.380956] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4006.025612] PM: Syncing filesystems ... done.
[ 4006.164636] PM: Preparing system for mem sleep
[ 4006.165127] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4006.167170] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4006.168377] PM: Entering mem sleep
[ 4006.168399] Suspending console(s) (use no_console_suspend to debug)
[ 4006.170181] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 4006.170369] sd 1:0:0:0: [sda] Stopping disk
[ 4006.273302] mei_me 0000:00:03.0: H_RDY is not cleared 0x80181818
[ 4007.248144] PM: suspend of devices complete after 1079.345 msecs
[ 4007.265274] PM: late suspend of devices complete after 17.124 msecs
[ 4007.280216] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 4007.296178] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 4007.296359] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 4007.312096] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 4007.312160] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 4007.312222] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 4007.312298] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 4007.344098] PM: noirq suspend of devices complete after 78.819 msecs
[ 4007.344782] ACPI: Preparing to enter system sleep state S3
[ 4007.345286] PM: Saving platform NVS memory
[ 4007.345361] Disabling non-boot CPUs ...
[ 4007.448029] smpboot: CPU 1 is now offline
[ 4007.448278] ACPI: Low-level resume complete
[ 4007.448278] PM: Restoring platform NVS memory
[ 4007.448278] CPU0: Thermal monitoring handled by SMI
[ 4007.448278] Enabling non-boot CPUs ...
[ 4007.448278] x86: Booting SMP configuration:
[ 4007.448278] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4007.448278] CPU1: Thermal monitoring handled by SMI
[ 4007.464924] CPU1 is up
[ 4007.469141] ACPI: Waking up from system sleep state S3
[ 4007.504147] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 4007.504214] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 4007.504279] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 4007.520102] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 4007.536306] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 4007.552103] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 4007.600323] PM: noirq resume of devices complete after 128.042 msecs
[ 4007.600848] PM: early resume of devices complete after 0.482 msecs
[ 4007.606693] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 4007.640891] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[ 4007.641330] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 4007.641372] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4007.643785] usb usb3: root hub lost power or was reset
[ 4007.643937] usb usb4: root hub lost power or was reset
[ 4007.644092] usb usb5: root hub lost power or was reset
[ 4007.644357] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4007.644570] usb usb6: root hub lost power or was reset
[ 4007.644709] usb usb7: root hub lost power or was reset
[ 4007.644850] usb usb8: root hub lost power or was reset
[ 4007.645364] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 4007.645489] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4007.646498] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4007.892114] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[ 4007.976427] ata2: SATA link down (SStatus 4 SControl 300)
[ 4007.984323] ata5: SATA link down (SStatus 0 SControl 300)
[ 4008.168062] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 4008.412151] usb 7-2: reset full-speed USB device number 2 using uhci_hcd
[ 4008.452151] tpm_tis 00:09: TPM is disabled/deactivated (0x7)
[ 4009.708062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4009.708779] ata1.00: unexpected _GTF length (8)
[ 4009.709972] ata1.00: unexpected _GTF length (8)
[ 4009.710189] ata1.00: configured for UDMA/100
[ 4009.724122] sd 1:0:0:0: [sda] Starting disk
[ 4009.749433] PM: resume of devices complete after 2148.579 msecs
[ 4009.749829] PM: Finishing wakeup.
[ 4009.749832] Restarting tasks ... done.
[ 4009.759548] video LNXVIDEO:00: Restoring backlight state
[ 4010.140246] usb 3-2: USB disconnect, device number 5
[ 4010.392789] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4010.396183] usb 3-2: new full-speed USB device number 6 using uhci_hcd
[ 4010.496448] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4010.496692] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4010.499328] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 4010.502665] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 4010.532638] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4010.564066] usb 3-2: New USB device found, idVendor=0930, idProduct=0508
[ 4010.564075] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4013.865272] wlan0: authenticate with 00:8e:f2:b7:60:06
[ 4013.867199] wlan0: send auth to 00:8e:f2:b7:60:06 (try 1/3)
[ 4013.872082] wlan0: authenticated
[ 4013.876073] wlan0: associate with 00:8e:f2:b7:60:06 (try 1/3)
[ 4013.879703] wlan0: RX AssocResp from 00:8e:f2:b7:60:06 (capab=0x411 status=0 aid=5)
[ 4013.882645] wlan0: associated
[ 4013.882684] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4179.398301] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4179.398339] agpgart-intel 0000:00:00.0: no hotplug settings from platform
[ 4179.398346] agpgart-intel 0000:00:00.0: using default PCI settings
[ 4179.398362] i915 0000:00:02.0: no hotplug settings from platform
[ 4179.398367] i915 0000:00:02.0: using default PCI settings
[ 4179.398381] pci 0000:00:02.1: no hotplug settings from platform
[ 4179.398387] pci 0000:00:02.1: using default PCI settings
[ 4179.398401] mei_me 0000:00:03.0: no hotplug settings from platform
[ 4179.398407] mei_me 0000:00:03.0: using default PCI settings
[ 4179.398422] e1000e 0000:00:19.0: no hotplug settings from platform
[ 4179.398428] e1000e 0000:00:19.0: using default PCI settings
[ 4179.398445] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
[ 4179.398451] uhci_hcd 0000:00:1a.0: using default PCI settings
[ 4179.398468] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
[ 4179.398473] uhci_hcd 0000:00:1a.1: using default PCI settings
[ 4179.398490] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
[ 4179.398496] uhci_hcd 0000:00:1a.2: using default PCI settings
[ 4179.398513] ehci-pci 0000:00:1a.7: no hotplug settings from platform
[ 4179.398518] ehci-pci 0000:00:1a.7: using default PCI settings
[ 4179.398536] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4179.398546] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4179.398589] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 4179.398598] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 4179.398607] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
[ 4179.398612] uhci_hcd 0000:00:1d.0: using default PCI settings
[ 4179.398630] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
[ 4179.398635] uhci_hcd 0000:00:1d.1: using default PCI settings
[ 4179.398652] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
[ 4179.398657] uhci_hcd 0000:00:1d.2: using default PCI settings
[ 4179.398674] ehci-pci 0000:00:1d.7: no hotplug settings from platform
[ 4179.398680] ehci-pci 0000:00:1d.7: using default PCI settings
[ 4179.398697] pci 0000:00:1e.0: no hotplug settings from platform
[ 4179.398702] pci 0000:00:1e.0: using default PCI settings
[ 4179.398732] sdhci-pci 0000:04:0b.0: no hotplug settings from platform
[ 4179.398738] sdhci-pci 0000:04:0b.0: using default PCI settings
[ 4179.398756] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4179.398761] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4179.398781] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4179.398787] ahci 0000:00:1f.2: using default PCI settings
[ 4179.699121] wlan0: deauthenticating from 00:8e:f2:b7:60:06 by local choice (reason=3)
[ 4179.715937] cfg80211: Calling CRDA to update world regulatory domain
[ 4179.720985] cfg80211: World regulatory domain updated:
[ 4179.720996] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4179.721001] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4179.721005] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4179.721009] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4179.721012] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4179.721016] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4180.686319] PM: Syncing filesystems ... done.
[ 4180.839529] PM: Preparing system for mem sleep
[ 4180.839935] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4180.842018] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4180.843365] PM: Entering mem sleep
[ 4180.843386] Suspending console(s) (use no_console_suspend to debug)
[ 4180.845209] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 4180.845413] sd 1:0:0:0: [sda] Stopping disk
[ 4180.948680] mei_me 0000:00:03.0: H_RDY is not cleared 0x80181818
[ 4181.928199] PM: suspend of devices complete after 1084.409 msecs
[ 4181.945306] PM: late suspend of devices complete after 17.099 msecs
[ 4181.960212] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 4181.976163] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 4181.976343] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 4181.992090] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 4181.992153] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 4181.992215] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 4181.992289] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 4182.024092] PM: noirq suspend of devices complete after 78.783 msecs
[ 4182.024776] ACPI: Preparing to enter system sleep state S3
[ 4182.025284] PM: Saving platform NVS memory
[ 4182.025361] Disabling non-boot CPUs ...
[ 4182.128040] smpboot: CPU 1 is now offline
[ 4182.128318] ACPI: Low-level resume complete
[ 4182.128318] PM: Restoring platform NVS memory
[ 4182.128318] CPU0: Thermal monitoring handled by SMI
[ 4182.128318] Enabling non-boot CPUs ...
[ 4182.128318] x86: Booting SMP configuration:
[ 4182.128318] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4182.128318] CPU1: Thermal monitoring handled by SMI
[ 4182.145166] CPU1 is up
[ 4182.150166] ACPI: Waking up from system sleep state S3
[ 4182.392550] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 4182.392618] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 4182.392686] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 4182.408797] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 4182.424724] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 4182.440113] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 4182.488393] PM: noirq resume of devices complete after 127.465 msecs
[ 4182.488605] PM: early resume of devices complete after 0.171 msecs
[ 4182.491785] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 4182.514713] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[ 4182.514865] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 4182.514907] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4182.517329] usb usb3: root hub lost power or was reset
[ 4182.517482] usb usb4: root hub lost power or was reset
[ 4182.517624] usb usb5: root hub lost power or was reset
[ 4182.517889] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4182.518088] usb usb6: root hub lost power or was reset
[ 4182.518229] usb usb7: root hub lost power or was reset
[ 4182.518685] usb usb8: root hub lost power or was reset
[ 4182.518971] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4182.519980] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4182.632491] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 4182.768137] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[ 4182.848114] ata2: SATA link down (SStatus 4 SControl 300)
[ 4182.856093] ata5: SATA link down (SStatus 0 SControl 300)
[ 4183.044061] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[ 4183.288148] usb 7-2: reset full-speed USB device number 2 using uhci_hcd
[ 4183.340142] tpm_tis 00:09: TPM is disabled/deactivated (0x7)
[ 4184.364088] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4184.364872] ata1.00: unexpected _GTF length (8)
[ 4184.435169] ata1.00: unexpected _GTF length (8)
[ 4184.435345] ata1.00: configured for UDMA/100
[ 4184.448121] sd 1:0:0:0: [sda] Starting disk
[ 4184.485849] PM: resume of devices complete after 1997.238 msecs
[ 4184.486231] PM: Finishing wakeup.
[ 4184.486234] Restarting tasks ... done.
[ 4184.523912] video LNXVIDEO:00: Restoring backlight state
[ 4184.880251] usb 3-2: USB disconnect, device number 6
[ 4185.060450] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4185.124159] usb 3-2: new full-speed USB device number 7 using uhci_hcd
[ 4185.164407] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4185.164785] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4185.172631] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 4185.175681] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 4185.205736] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4188.439558] wlan0: authenticate with 00:24:6c:2d:f7:00
[ 4188.441872] wlan0: send auth to 00:24:6c:2d:f7:00 (try 1/3)
[ 4188.450215] wlan0: authenticated
[ 4188.450423] wlan0: waiting for beacon from 00:24:6c:2d:f7:00
[ 4188.516040] wlan0: associate with 00:24:6c:2d:f7:00 (try 1/3)
[ 4188.519850] wlan0: RX AssocResp from 00:24:6c:2d:f7:00 (capab=0x421 status=0 aid=2)
[ 4188.524055] wlan0: associated
[ 4188.524723] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4200.248233] usb 3-2: device descriptor read/64, error -110
[ 4215.476407] usb 3-2: device descriptor read/64, error -110
[ 4215.692455] usb 3-2: new full-speed USB device number 8 using uhci_hcd
[ 4215.858384] usb 3-2: New USB device found, idVendor=0930, idProduct=0508
[ 4215.858397] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4486.234805] type=1400 audit(1409572656.101:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=7022 comm="apparmor_parser"
[ 4486.234830] type=1400 audit(1409572656.101:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=7022 comm="apparmor_parser"
[ 4486.236184] type=1400 audit(1409572656.105:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=7022 comm="apparmor_parser"
[ 5574.776412] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 5667.812404] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[ 5667.983590] usb 6-1: New USB device found, idVendor=093a, idProduct=2510
[ 5667.983602] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5667.983610] usb 6-1: Product: USB OPTICAL MOUSE
[ 5667.983616] usb 6-1: Manufacturer: PIXART
[ 5668.154250] hidraw: raw HID events driver (C) Jiri Kosina
[ 5668.202213] usbcore: registered new interface driver usbhid
[ 5668.202223] usbhid: USB HID core driver
[ 5668.250512] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input12
[ 5668.266153] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[ 7110.098859] systemd-hostnamed[8161]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[13357.239976] gedit[10683]: segfault at 20 ip 00007f02b820cdc8 sp 00007fff3aeed340 error 4 in libgtk-3.so.0.1000.8[7f02b803c000+4ff000]
[13408.093568] gedit[10734]: segfault at 20 ip 00007f7187aa8dc8 sp 00007fff93c60ad0 error 4 in libgtk-3.so.0.1000.8[7f71878d8000+4ff000]
[13985.930314] wlan0: authenticate with 00:24:6c:2d:f7:08
[13985.933723] wlan0: send auth to 00:24:6c:2d:f7:08 (try 1/3)
[13985.934203] cfg80211: Calling CRDA to update world regulatory domain
[13985.988233] cfg80211: World regulatory domain updated:
[13985.988240] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13985.988245] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13985.988249] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13985.988253] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13985.988256] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13985.988260] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13986.079958] wlan0: authenticated
[13986.084200] wlan0: associate with 00:24:6c:2d:f7:08 (try 1/3)
[13986.139501] wlan0: RX AssocResp from 00:24:6c:2d:f7:08 (capab=0x401 status=0 aid=2)
[13986.142974] wlan0: associated
[14090.066129] systemd-hostnamed[11855]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[14106.301229] wlan0: authenticate with 00:24:6c:2d:f7:00
[14106.310276] wlan0: send auth to 00:24:6c:2d:f7:00 (try 1/3)
[14106.310919] cfg80211: Calling CRDA to update world regulatory domain
[14106.316391] wlan0: authenticated
[14106.319497] cfg80211: World regulatory domain updated:
[14106.319504] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14106.319509] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14106.319513] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14106.319516] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[14106.319520] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14106.319525] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[14106.320820] wlan0: waiting for beacon from 00:24:6c:2d:f7:00
[14106.344073] wlan0: associate with 00:24:6c:2d:f7:00 (try 1/3)
[14106.399973] wlan0: RX AssocResp from 00:24:6c:2d:f7:00 (capab=0x421 status=0 aid=1)
[14106.402408] wlan0: associated
[19303.866393] cfg80211: Calling CRDA to update world regulatory domain
[19303.875287] cfg80211: World regulatory domain updated:
[19303.875302] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19303.875309] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19303.875316] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19303.875321] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19303.875327] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19303.875332] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19304.400064] wlan0: authenticate with 00:24:6c:2d:f7:08
[19304.405256] wlan0: send auth to 00:24:6c:2d:f7:08 (try 1/3)
[19304.579434] wlan0: authenticated
[19304.580094] wlan0: associate with 00:24:6c:2d:f7:08 (try 1/3)
[19304.644158] wlan0: RX AssocResp from 00:24:6c:2d:f7:08 (capab=0x401 status=0 aid=2)
[19304.646771] wlan0: associated
[19385.890083] wlan0: authenticate with 00:24:6c:2d:9c:60
[19385.892926] wlan0: direct probe to 00:24:6c:2d:9c:60 (try 1/3)
[19385.893206] cfg80211: Calling CRDA to update world regulatory domain
[19385.901675] cfg80211: World regulatory domain updated:
[19385.901683] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19385.901687] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19385.901691] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19385.901695] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19385.901699] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19385.901703] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19386.096062] wlan0: direct probe to 00:24:6c:2d:9c:60 (try 2/3)
[19386.300056] wlan0: direct probe to 00:24:6c:2d:9c:60 (try 3/3)
[19386.504326] wlan0: authentication with 00:24:6c:2d:9c:60 timed out
[19387.113542] wlan0: authenticate with 00:24:6c:2d:f7:08
[19387.116504] wlan0: send auth to 00:24:6c:2d:f7:08 (try 1/3)
[19387.321304] wlan0: authenticated
[19387.324127] wlan0: associate with 00:24:6c:2d:f7:08 (try 1/3)
[19387.335811] wlan0: RX AssocResp from 00:24:6c:2d:f7:08 (capab=0x401 status=0 aid=2)
[19387.338305] wlan0: associated
[19649.330761] systemd-hostnamed[14321]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[21185.895201] wlan0: authenticate with 00:24:6c:2d:f6:f0
[21185.897827] wlan0: direct probe to 00:24:6c:2d:f6:f0 (try 1/3)
[21185.899558] cfg80211: Calling CRDA to update world regulatory domain
[21185.950560] cfg80211: World regulatory domain updated:
[21185.950567] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[21185.950571] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21185.950576] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21185.950579] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[21185.950583] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21185.950587] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21186.100049] wlan0: direct probe to 00:24:6c:2d:f6:f0 (try 2/3)
[21186.304062] wlan0: direct probe to 00:24:6c:2d:f6:f0 (try 3/3)
[21186.508078] wlan0: authentication with 00:24:6c:2d:f6:f0 timed out
[21186.935038] wlan0: authenticate with 00:24:6c:2d:f7:08
[21186.937503] wlan0: send auth to 00:24:6c:2d:f7:08 (try 1/3)
[21187.083580] wlan0: authenticated
[21187.084384] wlan0: associate with 00:24:6c:2d:f7:08 (try 1/3)
[21187.087291] wlan0: RX AssocResp from 00:24:6c:2d:f7:08 (capab=0x401 status=0 aid=2)
[21187.091789] wlan0: associated
[21850.875094] cfg80211: Calling CRDA to update world regulatory domain
[21850.883981] cfg80211: World regulatory domain updated:
[21850.883988] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[21850.883993] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21850.883997] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21850.884001] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[21850.884034] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21850.884038] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21851.266588] wlan0: authenticate with 00:24:6c:2d:9c:68
[21851.269486] wlan0: direct probe to 00:24:6c:2d:9c:68 (try 1/3)
[21851.472335] wlan0: direct probe to 00:24:6c:2d:9c:68 (try 2/3)
[21851.676187] wlan0: direct probe to 00:24:6c:2d:9c:68 (try 3/3)
[21851.880078] wlan0: authentication with 00:24:6c:2d:9c:68 timed out
[21852.189207] wlan0: authenticate with 00:24:6c:24:40:e8
[21852.192158] wlan0: direct probe to 00:24:6c:24:40:e8 (try 1/3)
[21852.396337] wlan0: direct probe to 00:24:6c:24:40:e8 (try 2/3)
[21852.600139] wlan0: direct probe to 00:24:6c:24:40:e8 (try 3/3)
[21852.804101] wlan0: authentication with 00:24:6c:24:40:e8 timed out
[21853.007864] wlan0: authenticate with 00:24:6c:2d:f6:f8
[21853.010344] wlan0: direct probe to 00:24:6c:2d:f6:f8 (try 1/3)
[21853.212095] wlan0: direct probe to 00:24:6c:2d:f6:f8 (try 2/3)
[21853.416286] wlan0: direct probe to 00:24:6c:2d:f6:f8 (try 3/3)
[21853.620100] wlan0: authentication with 00:24:6c:2d:f6:f8 timed out
[21856.663332] wlan0: authenticate with 00:24:6c:24:40:e0
[21856.665902] wlan0: direct probe to 00:24:6c:24:40:e0 (try 1/3)
[21856.868110] wlan0: direct probe to 00:24:6c:24:40:e0 (try 2/3)
[21857.072140] wlan0: direct probe to 00:24:6c:24:40:e0 (try 3/3)
[21857.276172] wlan0: authentication with 00:24:6c:24:40:e0 timed out
[21860.348418] wlan0: authenticate with 00:24:6c:2d:f7:00
[21860.353998] wlan0: send auth to 00:24:6c:2d:f7:00 (try 1/3)
[21860.355649] wlan0: authenticated
[21860.356394] wlan0: waiting for beacon from 00:24:6c:2d:f7:00
[21860.452079] wlan0: associate with 00:24:6c:2d:f7:00 (try 1/3)
[21860.508041] wlan0: RX AssocResp from 00:24:6c:2d:f7:00 (capab=0x421 status=0 aid=4)
[21860.515371] wlan0: associated
[22310.531643] systemd-hostnamed[16907]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[25683.163214] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25683.163254] agpgart-intel 0000:00:00.0: no hotplug settings from platform
[25683.163261] agpgart-intel 0000:00:00.0: using default PCI settings
[25683.163276] i915 0000:00:02.0: no hotplug settings from platform
[25683.163282] i915 0000:00:02.0: using default PCI settings
[25683.163296] pci 0000:00:02.1: no hotplug settings from platform
[25683.163301] pci 0000:00:02.1: using default PCI settings
[25683.163315] mei_me 0000:00:03.0: no hotplug settings from platform
[25683.163321] mei_me 0000:00:03.0: using default PCI settings
[25683.163336] e1000e 0000:00:19.0: no hotplug settings from platform
[25683.163342] e1000e 0000:00:19.0: using default PCI settings
[25683.163360] uhci_hcd 0000:00:1a.0: no hotplug settings from platform
[25683.163366] uhci_hcd 0000:00:1a.0: using default PCI settings
[25683.163384] uhci_hcd 0000:00:1a.1: no hotplug settings from platform
[25683.163389] uhci_hcd 0000:00:1a.1: using default PCI settings
[25683.163407] uhci_hcd 0000:00:1a.2: no hotplug settings from platform
[25683.163412] uhci_hcd 0000:00:1a.2: using default PCI settings
[25683.163429] ehci-pci 0000:00:1a.7: no hotplug settings from platform
[25683.163435] ehci-pci 0000:00:1a.7: using default PCI settings
[25683.163453] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[25683.163462] pcieport 0000:00:1c.0: no hotplug settings from platform
[25683.163504] iwlwifi 0000:01:00.0: no hotplug settings from platform
[25683.163514] pcieport 0000:00:1c.3: no hotplug settings from platform
[25683.163522] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
[25683.163528] uhci_hcd 0000:00:1d.0: using default PCI settings
[25683.163545] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
[25683.163550] uhci_hcd 0000:00:1d.1: using default PCI settings
[25683.163567] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
[25683.163573] uhci_hcd 0000:00:1d.2: using default PCI settings
[25683.163590] ehci-pci 0000:00:1d.7: no hotplug settings from platform
[25683.163595] ehci-pci 0000:00:1d.7: using default PCI settings
[25683.163615] pci 0000:00:1e.0: no hotplug settings from platform
[25683.163620] pci 0000:00:1e.0: using default PCI settings
[25683.163648] sdhci-pci 0000:04:0b.0: no hotplug settings from platform
[25683.163654] sdhci-pci 0000:04:0b.0: using default PCI settings
[25683.163671] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[25683.163677] lpc_ich 0000:00:1f.0: using default PCI settings
[25683.163696] ahci 0000:00:1f.2: no hotplug settings from platform
[25683.163702] ahci 0000:00:1f.2: using default PCI settings
[25683.782740] wlan0: deauthenticating from 00:24:6c:2d:f7:00 by local choice (reason=3)
[25683.789660] cfg80211: Calling CRDA to update world regulatory domain
[25683.935438] cfg80211: World regulatory domain updated:
[25683.935444] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[25683.935449] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25683.935452] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25683.935455] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[25683.935458] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25683.935462] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25686.725148] PM: Syncing filesystems ... done.
[25686.959604] PM: Preparing system for mem sleep
[25687.018031] Freezing user space processes ... (elapsed 0.001 seconds) done.
[25687.019990] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[25687.021298] PM: Entering mem sleep
[25687.021318] Suspending console(s) (use no_console_suspend to debug)
[25687.023233] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[25687.023596] sd 1:0:0:0: [sda] Stopping disk
[25687.125229] mei_me 0000:00:03.0: H_RDY is not cleared 0x80181818
[25688.084204] PM: suspend of devices complete after 1062.450 msecs
[25688.101300] PM: late suspend of devices complete after 17.089 msecs
[25688.116217] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[25688.132167] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[25688.132347] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[25688.148093] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[25688.148155] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[25688.148217] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[25688.148292] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[25688.180097] PM: noirq suspend of devices complete after 78.793 msecs
[25688.180781] ACPI: Preparing to enter system sleep state S3
[25688.181285] PM: Saving platform NVS memory
[25688.181326] Disabling non-boot CPUs ...
[25688.284046] smpboot: CPU 1 is now offline
[25688.284311] ACPI: Low-level resume complete
[25688.284311] PM: Restoring platform NVS memory
[25688.284311] CPU0: Thermal monitoring handled by SMI
[25688.284311] Enabling non-boot CPUs ...
[25688.284311] x86: Booting SMP configuration:
[25688.284311] smpboot: Booting Node 0 Processor 1 APIC 0x1
[25688.284311] CPU1: Thermal monitoring handled by SMI
[25688.301276] CPU1 is up
[25688.305545] ACPI: Waking up from system sleep state S3
[25688.544222] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[25688.544289] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[25688.544359] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[25688.560181] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[25688.576384] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[25688.592180] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[25688.640413] PM: noirq resume of devices complete after 127.198 msecs
[25688.640627] PM: early resume of devices complete after 0.173 msecs
[25688.661500] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[25688.684642] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[25688.684799] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[25688.684841] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[25688.687276] usb usb3: root hub lost power or was reset
[25688.687429] usb usb4: root hub lost power or was reset
[25688.687570] usb usb5: root hub lost power or was reset
[25688.687835] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[25688.688047] usb usb6: root hub lost power or was reset
[25688.688503] usb usb7: root hub lost power or was reset
[25688.688645] usb usb8: root hub lost power or was reset
[25688.688929] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[25688.689939] sdhci-pci 0000:04:0b.0: Will use DMA mode even though HW doesn't fully claim to support it.
[25688.790060] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[25689.024113] ata5: SATA link down (SStatus 0 SControl 300)
[25689.032116] ata2: SATA link down (SStatus 4 SControl 300)
[25689.032123] usb 7-2: reset full-speed USB device number 2 using uhci_hcd
[25689.280158] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[25689.508090] tpm_tis 00:09: TPM is disabled/deactivated (0x7)
[25689.556084] usb 2-3: reset high-speed USB device number 3 using ehci-pci
[25690.540065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[25690.540786] ata1.00: unexpected _GTF length (8)
[25690.541897] ata1.00: unexpected _GTF length (8)
[25690.542096] ata1.00: configured for UDMA/100
[25690.556099] sd 1:0:0:0: [sda] Starting disk
[25690.582743] PM: resume of devices complete after 1942.110 msecs
[25690.583138] PM: Finishing wakeup.
[25690.583151] Restarting tasks ... done.
[25690.598405] video LNXVIDEO:00: Restoring backlight state
[25690.976170] usb 3-2: USB disconnect, device number 8
[25691.134343] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[25691.216066] usb 3-2: new full-speed USB device number 9 using uhci_hcd
[25691.236126] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[25691.236464] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[25691.242925] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[25691.245994] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[25691.272462] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25691.389085] usb 3-2: New USB device found, idVendor=0930, idProduct=0508
[25691.389094] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[25691.393687] usb 6-1: USB disconnect, device number 2
[25697.883100] wlan0: authenticate with 00:8e:f2:b7:60:06
[25697.885585] wlan0: send auth to 00:8e:f2:b7:60:06 (try 1/3)
[25697.893873] wlan0: authenticated
[25697.896085] wlan0: associate with 00:8e:f2:b7:60:06 (try 1/3)
[25697.899687] wlan0: RX AssocResp from 00:8e:f2:b7:60:06 (capab=0x411 status=0 aid=6)
[25697.903033] wlan0: associated
[25697.903095] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[25697.942322] wlan0: deauthenticating from 00:8e:f2:b7:60:06 by local choice (reason=2)
[25697.949242] cfg80211: Calling CRDA to update world regulatory domain
[25697.949605] wlan0: authenticate with 00:8e:f2:b7:60:06
[25697.950348] wlan0: send auth to 00:8e:f2:b7:60:06 (try 1/3)
[25697.956291] wlan0: authenticated
[25697.957815] cfg80211: World regulatory domain updated:
[25697.957823] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[25697.957830] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25697.957836] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25697.957842] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[25697.957847] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25697.957853] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[25697.960369] wlan0: associate with 00:8e:f2:b7:60:06 (try 1/3)
[25697.963995] wlan0: RX AssocResp from 00:8e:f2:b7:60:06 (capab=0x411 status=0 aid=6)
[25697.965927] wlan0: associated