[   27.700457] wlan0: send auth to 08:76:ff:89:f7:7a (try 1/3)
[   27.702435] wlan0: authenticated
[   27.704165] wlan0: associate with 08:76:ff:89:f7:7a (try 1/3)
[   27.706943] wlan0: RX AssocResp from 08:76:ff:89:f7:7a (capab=0x411 status=0 aid=4)
[   27.707318] wlan0: associated
[   27.707350] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   29.976703] Non-volatile memory driver v1.3
[   30.451942] init: plymouth-stop pre-start process (1429) terminated with status 1
[ 2672.197342] wlan0: deauthenticating from 08:76:ff:89:f7:7a by local choice (reason=3)
[ 2672.203965] cfg80211: Calling CRDA to update world regulatory domain
[ 2672.211996] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 2672.212011] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 2672.221021] cfg80211: World regulatory domain updated:
[ 2672.221031] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2672.221037] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2672.221043] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2672.221047] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2672.221051] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2672.221056] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2674.171939] PM: Syncing filesystems ... done.
[ 2674.728485] PM: Preparing system for mem sleep
[ 2674.728721] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2674.731279] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2674.732847] PM: Entering mem sleep
[ 2674.733894] Suspending console(s) (use no_console_suspend to debug)
[ 2674.734405] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2674.734650] sd 0:0:0:0: [sda] Stopping disk
[ 2674.753075] mei_me 0000:00:16.0: suspend
[ 2675.048707] PM: suspend of devices complete after 314.582 msecs
[ 2675.049018] PM: late suspend of devices complete after 0.305 msecs
[ 2675.064742] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2675.080840] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2675.112601] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2675.128621] PM: noirq suspend of devices complete after 79.601 msecs
[ 2675.129065] ACPI: Preparing to enter system sleep state S3
[ 2675.185021] PM: Saving platform NVS memory
[ 2675.208261] Disabling non-boot CPUs ...
[ 2675.208826] Broke affinity for irq 17
[ 2675.208837] Broke affinity for irq 23
[ 2675.208842] Broke affinity for irq 41
[ 2675.312533] smpboot: CPU 1 is now offline
[ 2675.315178] ACPI: Low-level resume complete
[ 2675.315257] PM: Restoring platform NVS memory
[ 2675.319489] Enabling non-boot CPUs ...
[ 2675.319573] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2675.333540] CPU1 is up
[ 2675.343165] ACPI: Waking up from system sleep state S3
[ 2675.378882] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2675.410858] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2675.442860] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2675.475108] PM: noirq resume of devices complete after 126.459 msecs
[ 2675.475373] PM: early resume of devices complete after 0.224 msecs
[ 2675.475433] i915 0000:00:02.0: setting latency timer to 64
[ 2675.475515] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2675.475629] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 2675.476489] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2675.476738] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2675.477312] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2675.477344] ahci 0000:00:1f.2: setting latency timer to 64
[ 2675.503433] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 2675.503434] [drm] This can cause pipe underruns and display issues.
[ 2675.503435] [drm] Please upgrade your BIOS to fix this.
[ 2675.682986] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[ 2676.698804] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2677.530823] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2677.704239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2677.726826] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2677.726832] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2677.728856] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2677.729006] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2677.729011] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2677.729588] ata1.00: configured for UDMA/133
[ 2677.742919] sd 0:0:0:0: [sda] Starting disk
[ 2677.770666] PM: resume of devices complete after 2295.341 msecs
[ 2677.771135] PM: Finishing wakeup.
[ 2677.771138] Restarting tasks ... done.
[ 2677.785168] video LNXVIDEO:00: Restoring backlight state
[ 2678.068132] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:d9:07:c1]
[ 2678.534794] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2678.544453] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2678.544608] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2678.545940] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2680.595828] wlan0: authenticate with 08:76:ff:89:f7:7a
[ 2680.611851] wlan0: send auth to 08:76:ff:89:f7:7a (try 1/3)
[ 2680.614131] wlan0: authenticated
[ 2680.614896] wlan0: associate with 08:76:ff:89:f7:7a (try 1/3)
[ 2680.618088] wlan0: RX AssocResp from 08:76:ff:89:f7:7a (capab=0x411 status=0 aid=4)
[ 2680.618589] wlan0: associated
[ 2680.618665] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2699.422266] wlan0: deauthenticating from 08:76:ff:89:f7:7a by local choice (reason=3)
[ 2699.427956] cfg80211: Calling CRDA to update world regulatory domain
[ 2699.439904] cfg80211: World regulatory domain updated:
[ 2699.439912] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2699.439918] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2699.439923] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2699.439928] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2699.439933] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2699.439937] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2701.199053] PM: Syncing filesystems ... done.
[ 2701.379907] PM: Preparing system for mem sleep
[ 2701.380115] Freezing user space processes ... (elapsed 0.005 seconds) done.
[ 2701.385132] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2701.386692] PM: Entering mem sleep
[ 2701.387746] Suspending console(s) (use no_console_suspend to debug)
[ 2701.388265] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2701.388469] sd 0:0:0:0: [sda] Stopping disk
[ 2701.403091] mei_me 0000:00:16.0: suspend
[ 2701.702196] PM: suspend of devices complete after 314.219 msecs
[ 2701.702493] PM: late suspend of devices complete after 0.291 msecs
[ 2701.718309] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2701.734393] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2701.766153] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2701.782173] PM: noirq suspend of devices complete after 79.678 msecs
[ 2701.782617] ACPI: Preparing to enter system sleep state S3
[ 2701.838538] PM: Saving platform NVS memory
[ 2701.861656] Disabling non-boot CPUs ...
[ 2701.863191] smpboot: CPU 1 is now offline
[ 2701.865926] ACPI: Low-level resume complete
[ 2701.866008] PM: Restoring platform NVS memory
[ 2701.870262] Enabling non-boot CPUs ...
[ 2701.870345] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2701.884188] CPU1 is up
[ 2701.893597] ACPI: Waking up from system sleep state S3
[ 2701.936456] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2701.968429] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2702.000427] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2702.032682] PM: noirq resume of devices complete after 126.930 msecs
[ 2702.032947] PM: early resume of devices complete after 0.224 msecs
[ 2702.033003] i915 0000:00:02.0: setting latency timer to 64
[ 2702.033080] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2702.033193] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 2702.034050] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2702.034299] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2702.034590] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2702.034622] ahci 0000:00:1f.2: setting latency timer to 64
[ 2702.061016] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 2702.061018] [drm] This can cause pipe underruns and display issues.
[ 2702.061019] [drm] Please upgrade your BIOS to fix this.
[ 2702.244479] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[ 2703.704365] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2704.032399] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2704.215288] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2704.237874] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2704.237881] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2704.239894] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2704.240046] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2704.240050] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2704.240796] ata1.00: configured for UDMA/133
[ 2704.256523] sd 0:0:0:0: [sda] Starting disk
[ 2704.281675] PM: resume of devices complete after 2248.776 msecs
[ 2704.282113] PM: Finishing wakeup.
[ 2704.282117] Restarting tasks ... done.
[ 2704.304324] video LNXVIDEO:00: Restoring backlight state
[ 2704.662880] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:d9:07:c1]
[ 2705.344870] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2705.358890] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2705.359086] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2705.360851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2707.501162] wlan0: authenticate with 08:76:ff:89:f7:7a
[ 2707.515009] wlan0: send auth to 08:76:ff:89:f7:7a (try 1/3)
[ 2707.518078] wlan0: authenticated
[ 2707.520304] wlan0: associate with 08:76:ff:89:f7:7a (try 1/3)
[ 2707.523592] wlan0: RX AssocResp from 08:76:ff:89:f7:7a (capab=0x411 status=0 aid=4)
[ 2707.524096] wlan0: associated
[ 2707.524147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2725.408348] wlan0: deauthenticating from 08:76:ff:89:f7:7a by local choice (reason=3)
[ 2725.416921] cfg80211: Calling CRDA to update world regulatory domain
[ 2725.430493] cfg80211: World regulatory domain updated:
[ 2725.430502] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2725.430508] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2725.430513] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2725.430518] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2725.430522] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2725.430526] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2726.736269] PM: Syncing filesystems ... done.
[ 2726.916757] PM: Preparing system for mem sleep
[ 2726.916965] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2726.919522] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2726.921156] PM: Entering mem sleep
[ 2726.922205] Suspending console(s) (use no_console_suspend to debug)
[ 2726.922723] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2726.923211] sd 0:0:0:0: [sda] Stopping disk
[ 2726.940431] mei_me 0000:00:16.0: suspend
[ 2727.239801] PM: suspend of devices complete after 317.364 msecs
[ 2727.240109] PM: late suspend of devices complete after 0.302 msecs
[ 2727.255897] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2727.271990] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2727.303756] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2727.319774] PM: noirq suspend of devices complete after 79.663 msecs
[ 2727.320218] ACPI: Preparing to enter system sleep state S3
[ 2727.376141] PM: Saving platform NVS memory
[ 2727.399271] Disabling non-boot CPUs ...
[ 2727.503692] smpboot: CPU 1 is now offline
[ 2727.506348] ACPI: Low-level resume complete
[ 2727.506432] PM: Restoring platform NVS memory
[ 2727.510720] Enabling non-boot CPUs ...
[ 2727.510803] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2727.524800] CPU1 is up
[ 2727.534443] ACPI: Waking up from system sleep state S3
[ 2727.582090] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2727.614063] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2727.646061] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2727.678318] PM: noirq resume of devices complete after 127.578 msecs
[ 2727.678584] PM: early resume of devices complete after 0.224 msecs
[ 2727.678647] i915 0000:00:02.0: setting latency timer to 64
[ 2727.687213] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2727.687326] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 2727.687941] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2727.687975] ahci 0000:00:1f.2: setting latency timer to 64
[ 2727.688358] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2727.688656] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2727.706640] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 2727.706642] [drm] This can cause pipe underruns and display issues.
[ 2727.706643] [drm] Please upgrade your BIOS to fix this.
[ 2727.894078] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[ 2729.685984] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2729.709988] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2729.877056] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2729.899646] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2729.899652] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2729.901658] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2729.901809] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2729.901813] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2729.902507] ata1.00: configured for UDMA/133
[ 2729.918105] sd 0:0:0:0: [sda] Starting disk
[ 2729.943448] PM: resume of devices complete after 2264.913 msecs
[ 2729.943884] PM: Finishing wakeup.
[ 2729.943887] Restarting tasks ... done.
[ 2730.003219] video LNXVIDEO:00: Restoring backlight state
[ 2730.394987] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:d9:07:c1]
[ 2730.926456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2730.934208] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2730.934393] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2730.935587] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2733.023053] wlan0: authenticate with 08:76:ff:89:f7:7a
[ 2733.038370] wlan0: send auth to 08:76:ff:89:f7:7a (try 1/3)
[ 2733.041946] wlan0: authenticated
[ 2733.046094] wlan0: associate with 08:76:ff:89:f7:7a (try 1/3)
[ 2733.048920] wlan0: RX AssocResp from 08:76:ff:89:f7:7a (capab=0x411 status=0 aid=4)
[ 2733.049445] wlan0: associated
[ 2733.049503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2751.219936] wlan0: deauthenticating from 08:76:ff:89:f7:7a by local choice (reason=3)
[ 2751.225296] cfg80211: Calling CRDA to update world regulatory domain
[ 2751.235404] cfg80211: World regulatory domain updated:
[ 2751.235414] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2751.235420] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2751.235425] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2751.235430] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2751.235434] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2751.235438] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2752.782153] PM: Syncing filesystems ... done.
[ 2753.004391] PM: Preparing system for mem sleep
[ 2753.004615] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2753.007420] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2753.009036] PM: Entering mem sleep
[ 2753.010149] Suspending console(s) (use no_console_suspend to debug)
[ 2753.010667] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2753.011196] sd 0:0:0:0: [sda] Stopping disk
[ 2753.030057] mei_me 0000:00:16.0: suspend
[ 2753.329442] PM: suspend of devices complete after 319.057 msecs
[ 2753.329747] PM: late suspend of devices complete after 0.300 msecs
[ 2753.345519] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2753.361614] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2753.393376] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2753.409396] PM: noirq suspend of devices complete after 79.647 msecs
[ 2753.409839] ACPI: Preparing to enter system sleep state S3
[ 2753.465765] PM: Saving platform NVS memory
[ 2753.488938] Disabling non-boot CPUs ...
[ 2753.593305] smpboot: CPU 1 is now offline
[ 2753.595890] ACPI: Low-level resume complete
[ 2753.595969] PM: Restoring platform NVS memory
[ 2753.600281] Enabling non-boot CPUs ...
[ 2753.600364] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2753.614343] CPU1 is up
[ 2753.623983] ACPI: Waking up from system sleep state S3
[ 2753.679733] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2753.711700] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2753.743725] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2753.775956] PM: noirq resume of devices complete after 127.581 msecs
[ 2753.776230] PM: early resume of devices complete after 0.233 msecs
[ 2753.776279] i915 0000:00:02.0: setting latency timer to 64
[ 2753.783665] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2753.783785] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 2753.784079] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2753.784327] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2753.784743] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2753.784776] ahci 0000:00:1f.2: setting latency timer to 64
[ 2753.808243] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 2753.808245] [drm] This can cause pipe underruns and display issues.
[ 2753.808246] [drm] Please upgrade your BIOS to fix this.
[ 2753.991806] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[ 2755.727627] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2755.727645] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2755.951188] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2755.973768] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2755.973774] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2755.975850] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2755.976094] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2755.976100] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2755.976842] ata1.00: configured for UDMA/133
[ 2755.991682] sd 0:0:0:0: [sda] Starting disk
[ 2756.017579] PM: resume of devices complete after 2241.396 msecs
[ 2756.018015] PM: Finishing wakeup.
[ 2756.018019] Restarting tasks ... done.
[ 2756.030830] video LNXVIDEO:00: Restoring backlight state
[ 2756.389331] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:d9:07:c1]
[ 2756.996728] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2757.005571] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2757.005770] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2757.008045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2759.100385] wlan0: authenticate with 08:76:ff:89:f7:7a
[ 2759.114594] wlan0: send auth to 08:76:ff:89:f7:7a (try 1/3)
[ 2759.122277] wlan0: authenticated
[ 2759.123547] wlan0: associate with 08:76:ff:89:f7:7a (try 1/3)
[ 2759.135267] wlan0: RX AssocResp from 08:76:ff:89:f7:7a (capab=0x411 status=0 aid=4)
[ 2759.135800] wlan0: associated
[ 2759.135873] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2777.418218] wlan0: deauthenticating from 08:76:ff:89:f7:7a by local choice (reason=3)
[ 2777.423727] cfg80211: Calling CRDA to update world regulatory domain
[ 2777.437704] cfg80211: World regulatory domain updated:
[ 2777.437714] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2777.437720] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2777.437726] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2777.437731] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2777.437735] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2777.437739] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2778.887237] PM: Syncing filesystems ... done.
[ 2779.096432] PM: Preparing system for mem sleep
[ 2779.096645] Freezing user space processes ... (elapsed 0.004 seconds) done.
[ 2779.101545] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2779.103050] PM: Entering mem sleep
[ 2779.104137] Suspending console(s) (use no_console_suspend to debug)
[ 2779.104650] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2779.104873] sd 0:0:0:0: [sda] Stopping disk
[ 2779.119496] mei_me 0000:00:16.0: suspend
[ 2779.431639] PM: suspend of devices complete after 327.433 msecs
[ 2779.431935] PM: late suspend of devices complete after 0.290 msecs
[ 2779.447729] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2779.463826] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2779.495575] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2779.511586] PM: noirq suspend of devices complete after 79.689 msecs
[ 2779.512029] ACPI: Preparing to enter system sleep state S3
[ 2779.567879] PM: Saving platform NVS memory
[ 2779.591176] Disabling non-boot CPUs ...
[ 2779.695450] smpboot: CPU 1 is now offline
[ 2779.698048] ACPI: Low-level resume complete
[ 2779.698133] PM: Restoring platform NVS memory
[ 2779.702442] Enabling non-boot CPUs ...
[ 2779.702527] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2779.716536] CPU1 is up
[ 2779.726193] ACPI: Waking up from system sleep state S3
[ 2779.773800] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2779.805755] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2779.837737] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2779.869978] PM: noirq resume of devices complete after 126.946 msecs
[ 2779.870241] PM: early resume of devices complete after 0.223 msecs
[ 2779.870304] i915 0000:00:02.0: setting latency timer to 64
[ 2779.870380] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2779.870495] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 2779.871387] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2779.871636] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2779.871926] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2779.871960] ahci 0000:00:1f.2: setting latency timer to 64
[ 2779.898286] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 2779.898288] [drm] This can cause pipe underruns and display issues.
[ 2779.898289] [drm] Please upgrade your BIOS to fix this.
[ 2780.081731] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[ 2781.716731] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2781.868707] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2782.050640] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2782.073207] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2782.073214] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2782.075305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2782.075460] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2782.075465] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2782.076041] ata1.00: configured for UDMA/133
[ 2782.088666] sd 0:0:0:0: [sda] Starting disk
[ 2782.117011] PM: resume of devices complete after 2247.941 msecs
[ 2782.117450] PM: Finishing wakeup.
[ 2782.117453] Restarting tasks ... done.
[ 2782.138444] video LNXVIDEO:00: Restoring backlight state
[ 2782.320295] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:d9:07:c1]
[ 2782.926810] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2782.934729] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2782.934921] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2782.936306] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2785.023894] wlan0: authenticate with 08:76:ff:89:f7:7a
[ 2785.038367] wlan0: send auth to 08:76:ff:89:f7:7a (try 1/3)
[ 2785.041501] wlan0: authenticated
[ 2785.043250] wlan0: associate with 08:76:ff:89:f7:7a (try 1/3)
[ 2785.048287] wlan0: RX AssocResp from 08:76:ff:89:f7:7a (capab=0x411 status=0 aid=4)
[ 2785.048783] wlan0: associated
[ 2785.048839] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2803.406806] wlan0: deauthenticating from 08:76:ff:89:f7:7a by local choice (reason=3)
[ 2803.412411] cfg80211: Calling CRDA to update world regulatory domain
[ 2803.421125] cfg80211: World regulatory domain updated:
[ 2803.421132] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2803.421136] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2803.421140] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2803.421143] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2803.421146] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2803.421149] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2805.208014] PM: Syncing filesystems ... done.
[ 2805.448702] PM: Preparing system for mem sleep
[ 2805.448857] Freezing user space processes ... (elapsed 0.154 seconds) done.
[ 2805.603522] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2805.605052] PM: Entering mem sleep
[ 2805.605834] Suspending console(s) (use no_console_suspend to debug)
[ 2805.606191] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2805.606634] sd 0:0:0:0: [sda] Stopping disk
[ 2805.620776] mei_me 0000:00:16.0: suspend
[ 2805.940156] PM: suspend of devices complete after 334.307 msecs
[ 2805.940399] PM: late suspend of devices complete after 0.239 msecs
[ 2805.956123] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2805.972198] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2806.003957] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2806.019968] PM: noirq suspend of devices complete after 79.606 msecs
[ 2806.020424] ACPI: Preparing to enter system sleep state S3
[ 2806.076243] PM: Saving platform NVS memory
[ 2806.093311] Disabling non-boot CPUs ...
[ 2806.195828] smpboot: CPU 1 is now offline
[ 2806.197810] ACPI: Low-level resume complete
[ 2806.197873] PM: Restoring platform NVS memory
[ 2806.201274] Enabling non-boot CPUs ...
[ 2806.201338] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2806.215001] CPU1 is up
[ 2806.221987] ACPI: Waking up from system sleep state S3
[ 2806.284787] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2806.316733] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2806.348714] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2806.380927] PM: noirq resume of devices complete after 124.935 msecs
[ 2806.381127] PM: early resume of devices complete after 0.166 msecs
[ 2806.381169] i915 0000:00:02.0: setting latency timer to 64
[ 2806.388651] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2806.388698] usb usb3: root hub lost power or was reset
[ 2806.388700] usb usb4: root hub lost power or was reset
[ 2806.388883] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[ 2806.388989] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 2806.389280] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2806.389292] usb usb1: root hub lost power or was reset
[ 2806.393191] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2806.393411] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2806.393863] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2806.393875] usb usb2: root hub lost power or was reset
[ 2806.395546] ahci 0000:00:1f.2: setting latency timer to 64
[ 2806.397771] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2806.401824] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 2806.401825] [drm] This can cause pipe underruns and display issues.
[ 2806.401826] [drm] Please upgrade your BIOS to fix this.
[ 2806.724528] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 2806.968376] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 2807.172413] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
[ 2807.707996] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2808.335711] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2808.546270] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2808.568922] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2808.568929] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2808.570719] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2808.570868] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2808.570873] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2808.571485] ata1.00: configured for UDMA/133
[ 2808.587568] sd 0:0:0:0: [sda] Starting disk
[ 2808.612756] PM: resume of devices complete after 2232.795 msecs
[ 2808.613086] PM: Finishing wakeup.
[ 2808.613089] Restarting tasks ... done.
[ 2808.620640] video LNXVIDEO:00: Restoring backlight state
[ 2809.184529] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:d9:07:c1]
[ 2809.647783] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2809.650442] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2809.651079] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2809.652279] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2811.719274] wlan0: authenticate with 08:76:ff:89:f7:7a
[ 2811.735451] wlan0: send auth to 08:76:ff:89:f7:7a (try 1/3)
[ 2811.737611] wlan0: authenticated
[ 2811.742627] wlan0: associate with 08:76:ff:89:f7:7a (try 1/3)
[ 2811.745452] wlan0: RX AssocResp from 08:76:ff:89:f7:7a (capab=0x411 status=0 aid=4)
[ 2811.745855] wlan0: associated
[ 2811.746155] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2835.438695] mei_me 0000:00:16.0: reset: init clients timeout hbm_state = 1.
[ 2835.438713] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
[ 3656.737410] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported
[ 3656.737430] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[ 6198.710627] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported
[ 6198.710646] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[ 6210.484501] systemd-hostnamed[6547]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 8475.086698] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported
[ 8475.086719] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[ 9042.823835] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported
[ 9042.823855] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[10158.556133] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
[10158.594193] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
[10158.632262] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
[10158.657192] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
[10158.683160] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at byte 6
[10158.683168] psmouse serio4: issuing reconnect request
[10529.097055] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[10529.097066] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[10529.097068] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[10529.098026] CPU1: Core temperature/speed normal
[10529.098037] CPU0: Package temperature/speed normal
[10529.098039] CPU1: Package temperature/speed normal
[10606.490268] mce: [Hardware Error]: Machine check events logged
[10834.621717] CPU1: Core temperature above threshold, cpu clock throttled (total events = 880)
[10834.621723] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1533)
[10834.621736] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1533)
[10834.622714] CPU1: Core temperature/speed normal
[10834.622721] CPU1: Package temperature/speed normal
[10834.622725] CPU0: Package temperature/speed normal
[11056.478435] mce: [Hardware Error]: Machine check events logged
[11136.807951] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1306)
[11136.807963] CPU0: Package temperature above threshold, cpu clock throttled (total events = 2426)
[11136.807966] CPU1: Package temperature above threshold, cpu clock throttled (total events = 2426)
[11136.808964] CPU1: Core temperature/speed normal
[11136.808967] CPU0: Package temperature/speed normal
[11136.808976] CPU1: Package temperature/speed normal
[11206.474493] mce: [Hardware Error]: Machine check events logged
[11652.725161] CPU1: Core temperature above threshold, cpu clock throttled (total events = 2598)
[11652.725172] CPU0: Package temperature above threshold, cpu clock throttled (total events = 4807)
[11652.725174] CPU1: Package temperature above threshold, cpu clock throttled (total events = 4807)
[11652.726136] CPU1: Core temperature/speed normal
[11652.726143] CPU1: Package temperature/speed normal
[11652.726170] CPU0: Package temperature/speed normal
[11700.473508] mce: [Hardware Error]: Machine check events logged
[12600.374197] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported
[12600.374217] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12886.674790] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported
[12886.674808] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[14435.005700] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[14435.025352] usb 3-1: New USB device found, idVendor=0461, idProduct=4d81
[14435.025364] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[14435.025370] usb 3-1: Product: USB Optical Mouse
[14435.025676] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[14435.949267] hidraw: raw HID events driver (C) Jiri Kosina
[14435.958053] usbcore: registered new interface driver usbhid
[14435.958059] usbhid: USB HID core driver
[14435.998542] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input10
[14435.998773] hid-generic 0003:0461:4D81.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
[15118.459918] systemd-hostnamed[8438]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!