[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-9-rt (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #152-Ubuntu SMP PREEMPT RT Thu Oct 15 13:22:24 UTC 2009 (Ubuntu 2.6.31-9.152-rt) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-9-rt root=UUID=637289c1-037d-4268-95a4-81502a5b4cab ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 00CFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 base 0120000000 mask FFF8000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000128000000 aka 4736M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0100000000 - 0128000000 page 2M [ 0.000000] kernel direct mapping tables up to 128000000 @ c000-12000 [ 0.000000] RAMDISK: 3780a000 - 37fef8ef [ 0.000000] ACPI: RSDP 00000000000f6980 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee30c0 048EF (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: SSDT 00000000cfee7a40 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfee7d40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee7d80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee79c0 00068 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000128000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000128000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 0000000000036fff] pages 25 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0128000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001b0fe00] TEXT DATA BSS ==> [0001000000 - 0001b0fe00] [ 0.000000] #3 [003780a000 - 0037fef8ef] RAMDISK ==> [003780a000 - 0037fef8ef] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001b10000 - 0001b100fe] BRK ==> [0001b10000 - 0001b100fe] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f4fd0] f4fd0 [ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00128000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00128000 [ 0.000000] On node 0 totalpages: 1015418 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 2240 pages used for memmap [ 0.000000] Normal zone: 161600 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages at ffff88002805e000, static data 76228 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 998738 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-9-rt root=UUID=637289c1-037d-4268-95a4-81502a5b4cab ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 3918668k/4849664k available (5398k kernel code, 787992k absent, 143004k reserved, 3678k data, 632k init) [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Preemptible RCU implementation. [ 0.000000] NR_IRQS:2304 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2806.349 MHz processor. [ 0.000010] spurious 8259A interrupt: IRQ7. [ 0.000707] Console: colour VGA+ 80x25 [ 0.000710] console [tty0] enabled [ 0.000999] allocated 97517568 bytes of page_cgroup [ 0.000999] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.69 BogoMIPS (lpj=2806349) [ 0.001053] Security Framework initialized [ 0.001065] AppArmor: AppArmor initialized [ 0.001410] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003597] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004711] Mount-cache hash table entries: 256 [ 0.004829] Initializing cgroup subsys ns [ 0.005005] Initializing cgroup subsys cpuacct [ 0.005008] Initializing cgroup subsys memory [ 0.005016] Initializing cgroup subsys freezer [ 0.005018] Initializing cgroup subsys net_cls [ 0.005031] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.005033] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.005035] CPU 0/0x0 -> Node 0 [ 0.005037] tseg: 00cff00000 [ 0.005038] CPU: Physical Processor ID: 0 [ 0.005040] CPU: Processor Core ID: 0 [ 0.005042] mce: CPU supports 5 MCE banks [ 0.005049] using C1E aware idle routine [ 0.005050] Performance Counters: AMD PMU driver. [ 0.005054] ... version: 0 [ 0.005055] ... bit width: 48 [ 0.005056] ... generic counters: 4 [ 0.005057] ... value mask: 0000ffffffffffff [ 0.005059] ... max period: 00007fffffffffff [ 0.005060] ... fixed-purpose counters: 0 [ 0.005061] ... counter mask: 000000000000000f [ 0.005528] ACPI: Core revision 20090521 [ 0.013069] Setting APIC routing to flat [ 0.013698] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023715] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 [ 0.023999] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.023999] Initializing CPU#1 [ 0.023999] Calibrating delay using timer specific routine.. 5612.62 BogoMIPS (lpj=2806311) [ 0.023999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.023999] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.023999] CPU 1/0x1 -> Node 0 [ 0.023999] CPU: Physical Processor ID: 0 [ 0.023999] CPU: Processor Core ID: 1 [ 0.023999] mce: CPU supports 5 MCE banks [ 0.023999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.094353] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 [ 0.094463] Brought up 2 CPUs [ 0.094465] Total of 2 processors activated (11225.32 BogoMIPS). [ 0.094567] CPU0 attaching sched-domain: [ 0.094569] domain 0: span 0-1 level MC [ 0.094571] groups: 0 1 [ 0.094574] CPU1 attaching sched-domain: [ 0.094576] domain 0: span 0-1 level MC [ 0.094578] groups: 1 0 [ 0.095041] Booting paravirtualized kernel on bare hardware [ 0.095172] regulator: core version 0.5 [ 0.095172] Time: 7:07:20 Date: 11/05/09 [ 0.095172] NET: Registered protocol family 16 [ 0.095172] node 0 link 0: io port [c000, ffff] [ 0.095172] TOM: 00000000d8000000 aka 3456M [ 0.095172] node 0 link 0: mmio [a0000, bffff] [ 0.095172] node 0 link 0: mmio [d8000000, dfffffff] [ 0.095172] node 0 link 0: mmio [e0000000, fe02ffff] [ 0.095172] node 0 link 0: mmio [e0000000, efffffff] [ 0.095172] TOM2: 0000000128000000 aka 4736M [ 0.095172] bus: [00,03] on node 0 link 0 [ 0.095172] bus: 00 index 0 io port: [0, ffff] [ 0.095172] bus: 00 index 1 mmio: [a0000, bffff] [ 0.095172] bus: 00 index 2 mmio: [d8000000, ffffffff] [ 0.095172] bus: 00 index 3 mmio: [128000000, fcffffffff] [ 0.095172] ACPI: bus type pci registered [ 0.096028] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.096030] PCI: MCFG area at e0000000 reserved in E820 [ 0.104515] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.104517] PCI: Using configuration type 1 for base access [ 0.113072] bio: create slab at 0 [ 0.117295] ACPI: EC: Look up EC in DSDT [ 0.122887] ACPI: Interpreter enabled [ 0.122890] ACPI: (supports S0 S1 S4 S5) [ 0.122911] ACPI: Using IOAPIC for interrupt routing [ 0.128375] ACPI: No dock devices found. [ 0.128375] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.128375] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.128375] pci 0000:00:04.0: PME# disabled [ 0.128375] pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07] [ 0.128375] pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03] [ 0.128375] pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07] [ 0.128375] pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03] [ 0.128375] pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.128375] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.128375] pci 0000:00:12.0: set SATA to AHCI mode [ 0.128375] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.128375] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.128375] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.128375] pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.128417] pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.128488] pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.128539] pci 0000:00:13.5: supports D1 D2 [ 0.128541] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.128545] pci 0000:00:13.5: PME# disabled [ 0.128588] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f] [ 0.128654] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.128660] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.128667] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.128673] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.128679] pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f] [ 0.129030] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 0.129071] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.129075] pci 0000:00:14.2: PME# disabled [ 0.129239] pci 0000:01:05.0: reg 10 64bit mmio: [0xd8000000-0xdfffffff] [ 0.129243] pci 0000:01:05.0: reg 18 64bit mmio: [0xfdfe0000-0xfdfeffff] [ 0.129247] pci 0000:01:05.0: reg 20 io port: [0xde00-0xdeff] [ 0.129250] pci 0000:01:05.0: reg 24 32bit mmio: [0xfde00000-0xfdefffff] [ 0.129259] pci 0000:01:05.0: supports D1 D2 [ 0.129274] pci 0000:01:05.2: reg 10 64bit mmio: [0xfdffc000-0xfdffffff] [ 0.129301] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.129304] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdffffff] [ 0.129307] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] [ 0.129355] pci 0000:02:00.0: reg 10 64bit mmio: [0xfd800000-0xfd9fffff] [ 0.129438] pci 0000:02:00.0: supports D1 D2 [ 0.129440] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.129445] pci 0000:02:00.0: PME# disabled [ 0.129507] pci 0000:00:04.0: bridge io port: [0xe000-0xefff] [ 0.129509] pci 0000:00:04.0: bridge 32bit mmio: [0xfd800000-0xfd9fffff] [ 0.129512] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.129577] pci 0000:03:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff] [ 0.129585] pci 0000:03:0e.0: reg 14 32bit mmio: [0xfdcf8000-0xfdcfbfff] [ 0.129642] pci 0000:03:0e.0: supports D1 D2 [ 0.129643] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.129648] pci 0000:03:0e.0: PME# disabled [ 0.129691] pci 0000:03:0f.0: reg 10 io port: [0xce00-0xceff] [ 0.129699] pci 0000:03:0f.0: reg 14 32bit mmio: [0xfdcfe000-0xfdcfe0ff] [ 0.129730] pci 0000:03:0f.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.129753] pci 0000:03:0f.0: supports D1 D2 [ 0.129755] pci 0000:03:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.129760] pci 0000:03:0f.0: PME# disabled [ 0.129792] pci 0000:00:14.4: transparent bridge [ 0.129796] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] [ 0.129800] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.129804] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.129817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.130080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.130181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 0.130238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.148336] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.148414] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.148496] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.148580] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.148661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.148744] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.148825] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.148908] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.149129] SCSI subsystem initialized [ 0.153015] libata version 3.00 loaded. [ 0.153050] usbcore: registered new interface driver usbfs [ 0.153054] usbcore: registered new interface driver hub [ 0.153054] usbcore: registered new device driver usb [ 0.154049] ACPI: WMI: Mapper loaded [ 0.154049] PCI: Using ACPI for IRQ routing [ 0.162030] Bluetooth: Core ver 2.15 [ 0.162043] NET: Registered protocol family 31 [ 0.162043] Bluetooth: HCI device and connection manager initialized [ 0.162043] Bluetooth: HCI socket layer initialized [ 0.162043] NetLabel: Initializing [ 0.162043] NetLabel: domain hash size = 128 [ 0.162043] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.162043] NetLabel: unlabeled traffic allowed by default [ 0.162115] PCI-DMA: Disabling AGP. [ 0.162195] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.162195] PCI-DMA: using GART IOMMU. [ 0.162195] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.163042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.163048] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.176270] pnp: PnP ACPI init [ 0.176287] ACPI: bus type pnp registered [ 0.179777] pnp: PnP ACPI: found 14 devices [ 0.179779] ACPI: ACPI bus type pnp unregistered [ 0.179790] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.179793] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.179795] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.179801] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.179803] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.179806] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.179808] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.179810] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.179813] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.179815] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.179817] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.179820] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.179822] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.179825] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.179827] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.179829] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.179832] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.179835] system 00:02: ioport range 0xb00-0xb1f could not be reserved [ 0.179837] system 00:02: ioport range 0x238-0x23f has been reserved [ 0.179845] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.179849] system 00:0d: iomem range 0xcd600-0xcffff has been reserved [ 0.179852] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.179855] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.179857] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.179860] system 00:0d: iomem range 0xcfee0000-0xcfefffff could not be reserved [ 0.179863] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 0.179865] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.179868] system 00:0d: iomem range 0x100000-0xcfedffff could not be reserved [ 0.179871] system 00:0d: iomem range 0xcfff0000-0xd7feffff could not be reserved [ 0.179874] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.179876] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.179879] system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.184962] AppArmor: AppArmor Filesystem Enabled [ 0.184997] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.185022] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.185025] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdffffff [ 0.185028] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff [ 0.185031] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.185033] pci 0000:00:04.0: IO window: 0xe000-0xefff [ 0.185036] pci 0000:00:04.0: MEM window: 0xfd800000-0xfd9fffff [ 0.185038] pci 0000:00:04.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.185044] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.185047] pci 0000:00:14.4: IO window: 0xc000-0xcfff [ 0.185052] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff [ 0.185056] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff [ 0.185066] pci 0000:00:04.0: setting latency timer to 64 [ 0.185073] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.185075] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.185077] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.185079] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdffffff] [ 0.185081] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.185083] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.185085] pci_bus 0000:02: resource 1 mem: [0xfd800000-0xfd9fffff] [ 0.185087] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.185089] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.185091] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.185093] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.185095] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.185097] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.185150] NET: Registered protocol family 2 [ 0.185320] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.186816] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.190790] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 0.192470] TCP: Hash tables configured (established 524288 bind 65536) [ 0.192473] TCP reno registered [ 0.192585] NET: Registered protocol family 1 [ 0.192645] Trying to unpack rootfs image as initramfs... [ 0.349436] Freeing initrd memory: 8086k freed [ 0.353965] Scanning for low memory corruption every 60 seconds [ 0.354300] audit: initializing netlink socket (disabled) [ 0.354313] type=2000 audit(1257404840.353:1): initialized [ 0.357499] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.357623] VFS: Disk quotas dquot_6.5.2 [ 0.357651] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.358018] fuse init (API version 7.12) [ 0.358104] msgmni has been set to 7669 [ 0.358284] alg: No test for stdrng (krng) [ 0.358300] io scheduler noop registered [ 0.358302] io scheduler anticipatory registered [ 0.358303] io scheduler deadline registered [ 0.358319] io scheduler cfq registered (default) [ 0.931264] pci 0000:00:13.1: OHCI: BIOS handoff failed (BIOS bug?) 00000384 [ 0.980296] pci 0000:01:05.0: Boot video device [ 0.980508] pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X [ 0.980512] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.980739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.980875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.981175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.981178] ACPI: Power Button [PWRF] [ 0.981246] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.981248] ACPI: Power Button [PWRB] [ 0.981620] processor LNXCPU:00: registered as cooling_device0 [ 0.981683] processor LNXCPU:01: registered as cooling_device1 [ 0.986965] Linux agpgart interface v0.103 [ 0.986969] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.987191] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.987601] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.989600] brd: module loaded [ 0.990548] loop: module loaded [ 0.990711] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.990906] ahci 0000:00:12.0: version 3.0 [ 0.990927] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.991141] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.991144] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.991564] scsi0 : ahci [ 0.991741] scsi1 : ahci [ 0.991869] scsi2 : ahci [ 0.991994] scsi3 : ahci [ 0.992201] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed [ 0.992204] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.992207] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.992210] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.993151] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.993318] scsi4 : pata_atiixp [ 0.993445] scsi5 : pata_atiixp [ 0.994405] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 0.994407] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 0.996956] Fixed MDIO Bus: probed [ 0.997102] PPP generic driver version 2.4.2 [ 0.997429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.997473] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.997493] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.997582] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.997611] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.997629] ehci_hcd 0000:00:13.5: debug port 1 [ 0.997669] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 1.003088] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.003229] usb usb1: configuration #1 chosen from 1 choice [ 1.003302] hub 1-0:1.0: USB hub found [ 1.003310] hub 1-0:1.0: 10 ports detected [ 1.003445] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.003494] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.003505] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.003587] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.003639] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 1.058127] usb usb2: configuration #1 chosen from 1 choice [ 1.058190] hub 2-0:1.0: USB hub found [ 1.058200] hub 2-0:1.0: 2 ports detected [ 1.058293] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.058304] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.058376] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.058430] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 1.113120] usb usb3: configuration #1 chosen from 1 choice [ 1.113183] hub 3-0:1.0: USB hub found [ 1.113192] hub 3-0:1.0: 2 ports detected [ 1.113286] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.113297] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.113374] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.113419] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 1.168127] usb usb4: configuration #1 chosen from 1 choice [ 1.168191] hub 4-0:1.0: USB hub found [ 1.168201] hub 4-0:1.0: 2 ports detected [ 1.168292] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.168302] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.168378] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.168422] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.223127] usb usb5: configuration #1 chosen from 1 choice [ 1.223194] hub 5-0:1.0: USB hub found [ 1.223204] hub 5-0:1.0: 2 ports detected [ 1.223295] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.223306] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.223376] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.223414] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.278117] usb usb6: configuration #1 chosen from 1 choice [ 1.278180] hub 6-0:1.0: USB hub found [ 1.278189] hub 6-0:1.0: 2 ports detected [ 1.278280] uhci_hcd: USB Universal Host Controller Interface driver [ 1.278462] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.278940] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.278945] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.279187] mice: PS/2 mouse device common for all mice [ 1.279400] rtc_cmos 00:05: RTC can wake from S4 [ 1.279476] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.279542] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.279622] device-mapper: uevent: version 1.0.3 [ 1.279711] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.279792] device-mapper: multipath: version 1.1.0 loaded [ 1.279794] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.279960] cpuidle: using governor ladder [ 1.279961] cpuidle: using governor menu [ 1.280470] TCP cubic registered [ 1.280517] NET: Registered protocol family 10 [ 1.280932] lo: Disabled Privacy Extensions [ 1.281203] NET: Registered protocol family 17 [ 1.281268] Bluetooth: L2CAP ver 2.13 [ 1.281269] Bluetooth: L2CAP socket layer initialized [ 1.281272] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.281273] Bluetooth: SCO socket layer initialized [ 1.281294] Bluetooth: RFCOMM TTY layer initialized [ 1.281298] Bluetooth: RFCOMM socket layer initialized [ 1.281299] Bluetooth: RFCOMM ver 1.11 [ 1.281315] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00) [ 1.281365] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8 [ 1.281367] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa [ 1.281369] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc [ 1.281370] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe [ 1.281372] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 1.281373] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 1.281375] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 1.281632] PM: Resume from disk failed. [ 1.281646] registered taskstats version 1 [ 1.281776] Magic number: 1:211:116 [ 1.281861] rtc_cmos 00:05: setting system clock to 2009-11-05 07:07:21 UTC (1257404841) [ 1.281863] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.281864] EDD information not available. [ 1.294883] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.297301] ata3: SATA link down (SStatus 0 SControl 300) [ 1.305026] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.421121] usb 1-1: configuration #1 chosen from 1 choice [ 1.450265] ata4: softreset failed (device not ready) [ 1.450268] ata4: applying SB600 PMP SRST workaround and retrying [ 1.450283] ata2: softreset failed (device not ready) [ 1.450285] ata2: applying SB600 PMP SRST workaround and retrying [ 1.603274] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.603295] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.603877] ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 1.603879] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.603893] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.604182] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100, ATAPI AN [ 1.604198] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.604599] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.604601] ata2.00: configured for UDMA/133 [ 1.605372] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.605373] ata4.00: configured for UDMA/100 [ 1.868265] ata1: softreset failed (device not ready) [ 1.868268] ata1: applying SB600 PMP SRST workaround and retrying [ 2.021273] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.022406] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 2.022409] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 2.022411] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.022426] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.023122] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.023124] ata1.00: configured for UDMA/133 [ 2.034349] scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 2.034693] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.034731] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.034764] scsi 1:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 2.034786] sd 0:0:0:0: [sda] Write Protect is off [ 2.034789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.034826] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.034967] sda: [ 2.035095] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.035136] sd 1:0:0:0: [sdb] Write Protect is off [ 2.035138] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.035160] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.035173] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.035295] sdb: [ 2.035794] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5 [ 2.040307] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.040310] Uniform CD-ROM driver Revision: 3.20 [ 2.040469] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.040589] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 2.050216] sda1 sda2 < sdb1 [ 2.057084] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.063672] sda5 sda6 > [ 2.064137] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.191327] Freeing unused kernel memory: 632k freed [ 2.191554] Write protecting the kernel read-only data: 7676k [ 2.315233] [drm] Initialized drm 1.1.0 20060810 [ 2.375237] [drm] radeon default to kernel modesetting DISABLED. [ 2.375673] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.375824] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 [ 2.388857] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.388885] r8169 0000:03:0f.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.388926] r8169 0000:03:0f.0: no PCI Express capability [ 2.389718] eth0: RTL8169sc/8110sc at 0xffffc90000678000, 00:1d:7d:9c:7c:63, XID 18000000 IRQ 23 [ 2.390651] ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.441095] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdcff000-fdcff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.146841] PM: Starting manual resume from disk [ 3.146845] PM: Resume from partition 8:5 [ 3.146846] PM: Checking hibernation image. [ 3.147004] PM: Resume from disk failed. [ 3.199049] kjournald starting. Commit interval 5 seconds [ 3.199058] EXT3-fs: mounted filesystem with writeback data mode. [ 3.697411] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001d7d0000f045c0] [ 3.712057] type=1505 audit(1257404843.930:2): operation="profile_load" pid=1074 name=/usr/share/gdm/guest-session/Xsession [ 3.723659] type=1505 audit(1257404843.941:3): operation="profile_load" pid=1075 name=/sbin/dhclient3 [ 3.723875] type=1505 audit(1257404843.941:4): operation="profile_load" pid=1075 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.723997] type=1505 audit(1257404843.941:5): operation="profile_load" pid=1075 name=/usr/lib/connman/scripts/dhclient-script [ 3.754323] type=1505 audit(1257404843.972:6): operation="profile_load" pid=1076 name=/usr/bin/evince [ 3.757842] type=1505 audit(1257404843.975:7): operation="profile_load" pid=1076 name=/usr/bin/evince-previewer [ 3.759903] type=1505 audit(1257404843.977:8): operation="profile_load" pid=1076 name=/usr/bin/evince-thumbnailer [ 3.775305] type=1505 audit(1257404843.993:9): operation="profile_load" pid=1078 name=/usr/lib/cups/backend/cups-pdf [ 3.775579] type=1505 audit(1257404843.993:10): operation="profile_load" pid=1078 name=/usr/sbin/cupsd [ 4.500154] Adding 9863868k swap on /dev/sda5. Priority:-1 extents:1 across:9863868k [ 4.923050] EXT3 FS on sda1, internal journal [ 5.906758] udev: starting version 147 [ 6.025679] kjournald starting. Commit interval 5 seconds [ 6.132035] EXT3 FS on sda6, internal journal [ 6.132042] EXT3-fs: mounted filesystem with writeback data mode. [ 7.171986] parport_pc 00:09: reported by Plug and Play ACPI [ 7.172075] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.218914] EDAC MC: Ver: 2.1.0 Oct 15 2009 [ 7.300479] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.741114] ppdev: user-space parallel port driver [ 7.742575] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.747046] lp0: using parport0 (interrupt-driven). [ 7.749950] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 7.908191] logips2pp: Detected unknown logitech mouse model 127 [ 8.081574] EDAC amd64_edac: Ver: 3.2.0 Oct 15 2009 [ 8.083287] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 8.083291] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 8.083293] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 8.083294] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 8.083295] Might be a BIOS bug, if BIOS says ECC is enabled [ 8.083296] Use of the override can cause unknown side effects. [ 8.083323] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.384703] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 8.584126] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.116160] __ratelimit: 3 callbacks suppressed [ 9.116162] type=1505 audit(1257404849.333:12): operation="profile_replace" pid=1445 name=/usr/share/gdm/guest-session/Xsession [ 9.124577] type=1505 audit(1257404849.341:13): operation="profile_replace" pid=1446 name=/sbin/dhclient3 [ 9.124794] type=1505 audit(1257404849.341:14): operation="profile_replace" pid=1446 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 9.124916] type=1505 audit(1257404849.341:15): operation="profile_replace" pid=1446 name=/usr/lib/connman/scripts/dhclient-script [ 9.129294] type=1505 audit(1257404849.346:16): operation="profile_replace" pid=1448 name=/usr/bin/evince [ 9.134116] type=1505 audit(1257404849.351:17): operation="profile_replace" pid=1448 name=/usr/bin/evince-previewer [ 9.136199] type=1505 audit(1257404849.353:18): operation="profile_replace" pid=1448 name=/usr/bin/evince-thumbnailer [ 9.141171] type=1505 audit(1257404849.358:19): operation="profile_replace" pid=1455 name=/usr/lib/cups/backend/cups-pdf [ 9.141468] type=1505 audit(1257404849.358:20): operation="profile_replace" pid=1455 name=/usr/sbin/cupsd [ 9.143135] type=1505 audit(1257404849.360:21): operation="profile_replace" pid=1456 name=/usr/sbin/tcpdump [ 9.257538] Linux video capture interface: v2.00 [ 9.715957] cx23885 driver version 0.0.2 loaded [ 9.716088] cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.716196] CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected] [ 9.904770] tveeprom 1-0050: Hauppauge model 78521, rev C1E9, serial# 2713860 [ 9.904773] tveeprom 1-0050: MAC address is 00-0D-FE-29-69-04 [ 9.904775] tveeprom 1-0050: tuner model is Philips 18271_8295 (idx 149, type 54) [ 9.904777] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 9.904779] tveeprom 1-0050: audio processor is CX23887 (idx 42) [ 9.904781] tveeprom 1-0050: decoder processor is CX23887 (idx 37) [ 9.904783] tveeprom 1-0050: has radio [ 9.904785] cx23885[0]: hauppauge eeprom: model=78521 [ 10.595550] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.595868] cx25840 3-0044: cx25 0-21 found @ 0x88 (cx23885[0]) [ 10.600039] cx25840 3-0044: firmware: requesting v4l-cx23885-avcore-01.fw [ 11.363118] hda_codec: Unknown model for ALC889A, trying auto-probe from BIOS... [ 11.363348] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5 [ 11.370517] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 11.645520] cx25840 3-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 11.847856] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10A2 [ 11.847882] usbcore: registered new interface driver usblp [ 12.947085] tuner 2-0042: chip found @ 0x84 (cx23885[0]) [ 12.977933] tda829x 2-0042: could not clearly identify tuner address, defaulting to 60 [ 13.055241] tda18271 2-0060: creating new instance [ 13.071872] r8169: eth0: link up [ 13.085357] TDA18271HD/C1 detected @ 2-0060