[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 378a5000 - 37fef46e [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff746e [ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef46d to 008ad000 - 00ff746d [ 0.000000] ACPI: RSDP 000f8030 00014 (v00 AWARD ) [ 0.000000] ACPI: RSDT 3fff3040 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff3180 03EDE (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff70c0 00084 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac07a] BRK ==> [00008a9000 - 00008ac07a] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008ad000 - 0000ff746e] NEW RAMDISK ==> [00008ad000 - 0000ff746e] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f3ee0] f3ee0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: root=UUID=44de708d-c93b-4077-9937-0595b5767fa4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1017964k/1048512k available (4565k kernel code, 29696k reserved, 2143k data, 540k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.219 MHz processor. [ 0.000899] Console: colour VGA+ 80x25 [ 0.000904] console [tty0] enabled [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.43 BogoMIPS (lpj=12000876) [ 0.004033] Security Framework initialized [ 0.004057] AppArmor: AppArmor initialized [ 0.004067] Mount-cache hash table entries: 512 [ 0.004228] Initializing cgroup subsys ns [ 0.004235] Initializing cgroup subsys cpuacct [ 0.004240] Initializing cgroup subsys memory [ 0.004249] Initializing cgroup subsys freezer [ 0.004252] Initializing cgroup subsys net_cls [ 0.004276] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004280] CPU: L2 cache: 2048K [ 0.004284] CPU: Physical Processor ID: 0 [ 0.004286] CPU: Processor Core ID: 0 [ 0.004291] mce: CPU supports 4 MCE banks [ 0.004305] CPU0: Thermal monitoring enabled (TM1) [ 0.004311] using mwait in idle threads. [ 0.004320] Performance Counters: no PMU driver, software counters only. [ 0.004328] Checking 'hlt' instruction... OK. [ 0.023794] ACPI: Core revision 20090521 [ 0.036371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076456] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 6000.76 BogoMIPS (lpj=12001532) [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 4 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM1) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.165161] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 [ 0.165178] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168021] Brought up 2 CPUs [ 0.168025] Total of 2 processors activated (12001.20 BogoMIPS). [ 0.168073] CPU0 attaching sched-domain: [ 0.168078] domain 0: span 0-1 level CPU [ 0.168081] groups: 0 1 [ 0.168089] CPU1 attaching sched-domain: [ 0.168093] domain 0: span 0-1 level CPU [ 0.168097] groups: 1 0 [ 0.168184] Booting paravirtualized kernel on bare hardware [ 0.168281] regulator: core version 0.5 [ 0.168281] Time: 20:19:47 Date: 11/02/09 [ 0.168281] NET: Registered protocol family 16 [ 0.168291] EISA bus registered [ 0.168306] ACPI: bus type pci registered [ 0.169880] PCI: PCI BIOS revision 2.10 entry at 0xfa270, last bus=1 [ 0.169883] PCI: Using configuration type 1 for base access [ 0.173206] bio: create slab at 0 [ 0.173206] ACPI: EC: Look up EC in DSDT [ 0.182218] ACPI: Interpreter enabled [ 0.182228] ACPI: (supports S0 S3 S4 S5) [ 0.182263] ACPI: Using IOAPIC for interrupt routing [ 0.188376] ACPI: No dock devices found. [ 0.188511] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.188576] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff] [ 0.188780] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.188789] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.188798] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.188806] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.188815] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] [ 0.188850] pci 0000:00:02.5: PME# supported from D3cold [ 0.188855] pci 0000:00:02.5: PME# disabled [ 0.188886] pci 0000:00:03.0: reg 10 32bit mmio: [0xec113000-0xec113fff] [ 0.188950] pci 0000:00:03.1: reg 10 32bit mmio: [0xec110000-0xec110fff] [ 0.189012] pci 0000:00:03.2: reg 10 32bit mmio: [0xec111000-0xec111fff] [ 0.189087] pci 0000:00:03.3: reg 10 32bit mmio: [0xec112000-0xec112fff] [ 0.189141] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.189147] pci 0000:00:03.3: PME# disabled [ 0.189196] pci 0000:00:05.0: reg 10 io port: [0xe000-0xe007] [ 0.189205] pci 0000:00:05.0: reg 14 io port: [0xe100-0xe103] [ 0.189214] pci 0000:00:05.0: reg 18 io port: [0xe200-0xe207] [ 0.189222] pci 0000:00:05.0: reg 1c io port: [0xe300-0xe303] [ 0.189230] pci 0000:00:05.0: reg 20 io port: [0xe400-0xe40f] [ 0.189265] pci 0000:00:05.0: PME# supported from D3cold [ 0.189270] pci 0000:00:05.0: PME# disabled [ 0.189315] pci 0000:00:09.0: reg 10 io port: [0xe500-0xe51f] [ 0.189369] pci 0000:00:09.0: supports D1 D2 [ 0.189412] pci 0000:00:0a.0: reg 10 32bit mmio: [0xec100000-0xec10ffff] [ 0.189551] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] [ 0.189559] pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff] [ 0.189567] pci 0000:01:00.0: reg 18 32bit mmio: [0xec030000-0xec03ffff] [ 0.189588] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.189615] pci 0000:01:00.0: supports D1 D2 [ 0.189651] pci 0000:01:00.1: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.189659] pci 0000:01:00.1: reg 14 32bit mmio: [0xec020000-0xec02ffff] [ 0.189700] pci 0000:01:00.1: supports D1 D2 [ 0.189756] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.189762] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xec0fffff] [ 0.189768] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff] [ 0.189779] pci_bus 0000:00: on NUMA node 0 [ 0.189785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.213527] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.213668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.213808] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.213947] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.214087] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.214226] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.214365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.214504] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.214776] SCSI subsystem initialized [ 0.214837] libata version 3.00 loaded. [ 0.214837] usbcore: registered new interface driver usbfs [ 0.214837] usbcore: registered new interface driver hub [ 0.214837] usbcore: registered new device driver usb [ 0.214837] ACPI: WMI: Mapper loaded [ 0.214837] PCI: Using ACPI for IRQ routing [ 0.224014] Bluetooth: Core ver 2.15 [ 0.224036] NET: Registered protocol family 31 [ 0.224036] Bluetooth: HCI device and connection manager initialized [ 0.224036] Bluetooth: HCI socket layer initialized [ 0.224036] NetLabel: Initializing [ 0.224036] NetLabel: domain hash size = 128 [ 0.224036] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.224050] NetLabel: unlabeled traffic allowed by default [ 0.236015] pnp: PnP ACPI init [ 0.236030] ACPI: bus type pnp registered [ 0.239873] pnp: PnP ACPI: found 12 devices [ 0.239877] ACPI: ACPI bus type pnp unregistered [ 0.239882] PnPBIOS: Disabled by ACPI PNP [ 0.239897] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.239902] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.239906] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.239910] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.239914] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.239918] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.239922] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.239926] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.239929] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved [ 0.239933] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.239937] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.239941] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.239951] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.239955] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.239958] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.239962] system 00:02: ioport range 0x880-0x881 has been reserved [ 0.239965] system 00:02: ioport range 0x882-0x891 has been reserved [ 0.274682] AppArmor: AppArmor Filesystem Enabled [ 0.274711] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.274715] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.274723] pci 0000:00:01.0: MEM window: 0xec000000-0xec0fffff [ 0.274728] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xe7ffffff [ 0.274745] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.274748] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.274752] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.274755] pci_bus 0000:01: resource 1 mem: [0xec000000-0xec0fffff] [ 0.274758] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xe7ffffff] [ 0.274803] NET: Registered protocol family 2 [ 0.274941] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.275432] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.276265] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.276697] TCP: Hash tables configured (established 131072 bind 65536) [ 0.276701] TCP reno registered [ 0.276811] NET: Registered protocol family 1 [ 0.276903] Trying to unpack rootfs image as initramfs... [ 0.519787] Freeing initrd memory: 7465k freed [ 0.528096] cpufreq-nforce2: No nForce2 chipset. [ 0.528137] Scanning for low memory corruption every 60 seconds [ 0.528284] audit: initializing netlink socket (disabled) [ 0.528309] type=2000 audit(1257193187.528:1): initialized [ 0.537381] highmem bounce pool size: 64 pages [ 0.537390] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.539294] VFS: Disk quotas dquot_6.5.2 [ 0.539384] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.540160] fuse init (API version 7.12) [ 0.540275] msgmni has been set to 1731 [ 0.540620] alg: No test for stdrng (krng) [ 0.540659] io scheduler noop registered [ 0.540662] io scheduler anticipatory registered [ 0.540665] io scheduler deadline registered [ 0.540725] io scheduler cfq registered (default) [ 0.773226] Switched to high resolution mode on CPU 1 [ 0.776015] Switched to high resolution mode on CPU 0 [ 2.140010] pci 0000:00:03.3: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.140038] pci 0000:01:00.0: Boot video device [ 2.140178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.140214] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.140390] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.140396] ACPI: Power Button [PWRF] [ 2.140463] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.140467] ACPI: Power Button [PWRB] [ 2.140543] fan PNP0C0B:00: registered as cooling_device0 [ 2.140551] ACPI: Fan [FAN] (on) [ 2.140877] processor LNXCPU:00: registered as cooling_device1 [ 2.140929] processor LNXCPU:01: registered as cooling_device2 [ 2.143979] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.143990] ACPI: Thermal Zone [THRM] (17 C) [ 2.144085] isapnp: Scanning for PnP cards... [ 2.497669] isapnp: No Plug & Play device found [ 2.499210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.499321] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.499419] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.499803] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.499952] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.501318] brd: module loaded [ 2.501921] loop: module loaded [ 2.502015] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.502251] sata_sis 0000:00:05.0: version 1.0 [ 2.502270] alloc irq_desc for 17 on node -1 [ 2.502273] alloc kstat_irqs on node -1 [ 2.502282] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.502289] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode [ 2.502417] scsi0 : sata_sis [ 2.502549] scsi1 : sata_sis [ 2.503171] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 17 [ 2.503179] ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 17 [ 2.503766] pata_sis 0000:00:02.5: version 0.5.2 [ 2.503777] alloc irq_desc for 16 on node -1 [ 2.503780] alloc kstat_irqs on node -1 [ 2.503786] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.503970] scsi2 : pata_sis [ 2.504062] scsi3 : pata_sis [ 2.504959] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14 [ 2.504963] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15 [ 2.505447] Fixed MDIO Bus: probed [ 2.505495] PPP generic driver version 2.4.2 [ 2.505626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.505648] alloc irq_desc for 23 on node -1 [ 2.505651] alloc kstat_irqs on node -1 [ 2.505658] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.505674] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 2.505741] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 2.505781] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 2.505795] ehci_hcd 0000:00:03.3: irq 23, io mem 0xec112000 [ 2.516015] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 2.516116] usb usb1: configuration #1 chosen from 1 choice [ 2.516158] hub 1-0:1.0: USB hub found [ 2.516170] hub 1-0:1.0: 8 ports detected [ 2.516256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.516274] alloc irq_desc for 20 on node -1 [ 2.516277] alloc kstat_irqs on node -1 [ 2.516283] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.516294] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 2.516341] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 2.516363] ohci_hcd 0000:00:03.0: irq 20, io mem 0xec113000 [ 2.574073] usb usb2: configuration #1 chosen from 1 choice [ 2.574114] hub 2-0:1.0: USB hub found [ 2.574126] hub 2-0:1.0: 3 ports detected [ 2.574187] alloc irq_desc for 21 on node -1 [ 2.574190] alloc kstat_irqs on node -1 [ 2.574196] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.574206] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 2.574246] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 2.574268] ohci_hcd 0000:00:03.1: irq 21, io mem 0xec110000 [ 2.630080] usb usb3: configuration #1 chosen from 1 choice [ 2.630116] hub 3-0:1.0: USB hub found [ 2.630129] hub 3-0:1.0: 3 ports detected [ 2.630188] alloc irq_desc for 22 on node -1 [ 2.630191] alloc kstat_irqs on node -1 [ 2.630197] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.630208] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 2.630251] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 2.630272] ohci_hcd 0000:00:03.2: irq 22, io mem 0xec111000 [ 2.686074] usb usb4: configuration #1 chosen from 1 choice [ 2.686111] hub 4-0:1.0: USB hub found [ 2.686122] hub 4-0:1.0: 2 ports detected [ 2.686191] uhci_hcd: USB Universal Host Controller Interface driver [ 2.686282] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.686286] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.686364] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.686461] mice: PS/2 mouse device common for all mice [ 2.686585] rtc_cmos 00:04: RTC can wake from S4 [ 2.686625] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.686653] rtc0: alarms up to one year, 242 bytes nvram [ 2.686784] device-mapper: uevent: version 1.0.3 [ 2.686901] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.687011] device-mapper: multipath: version 1.1.0 loaded [ 2.687015] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.687165] EISA: Probing bus 0 at eisa.0 [ 2.687173] Cannot allocate resource for EISA slot 1 [ 2.687184] Cannot allocate resource for EISA slot 4 [ 2.687202] EISA: Detected 0 cards. [ 2.687337] cpuidle: using governor ladder [ 2.687341] cpuidle: using governor menu [ 2.688056] TCP cubic registered [ 2.688231] NET: Registered protocol family 10 [ 2.688879] lo: Disabled Privacy Extensions [ 2.689348] NET: Registered protocol family 17 [ 2.689372] Bluetooth: L2CAP ver 2.13 [ 2.689375] Bluetooth: L2CAP socket layer initialized [ 2.689378] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.689381] Bluetooth: SCO socket layer initialized [ 2.689424] Bluetooth: RFCOMM TTY layer initialized [ 2.689429] Bluetooth: RFCOMM socket layer initialized [ 2.689431] Bluetooth: RFCOMM ver 1.11 [ 2.689472] Using IPI No-Shortcut mode [ 2.689555] PM: Resume from disk failed. [ 2.689573] registered taskstats version 1 [ 2.689686] Magic number: 1:573:345 [ 2.689700] tty tty62: hash matches [ 2.689757] rtc_cmos 00:04: setting system clock to 2009-11-02 20:19:50 UTC (1257193190) [ 2.689761] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.689763] EDD information not available. [ 2.703561] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.820054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 2.872125] ata1.00: ATA-7: ST3320820AS, 3.AAD, max UDMA/133 [ 2.872129] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.884512] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 2.947120] ata1.00: configured for UDMA/133 [ 2.947273] scsi 0:0:0:0: Direct-Access ATA ST3320820AS 3.AA PQ: 0 ANSI: 5 [ 2.947432] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.947487] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.947556] sd 0:0:0:0: [sda] Write Protect is off [ 2.947560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.947595] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.947786] sda: sda1 sda2 sda3 sda4 [ 3.011156] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.034276] usb 1-5: configuration #1 chosen from 1 choice [ 3.264067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 3.272216] ata2.00: ATAPI: Optiarc DVD RW AD-7200S, 1.52, max UDMA/100 [ 3.288239] ata2.00: configured for UDMA/100 [ 3.290452] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.52 PQ: 0 ANSI: 5 [ 3.291874] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 3.291884] ata2: hard resetting link [ 3.336011] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 3.548894] usb 2-2: configuration #1 chosen from 1 choice [ 3.608066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 3.632236] ata2.00: configured for UDMA/100 [ 3.632781] ata2: EH complete [ 3.634082] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 3.634091] ata2: hard resetting link [ 3.952065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 3.976235] ata2.00: configured for UDMA/100 [ 3.976802] ata2: EH complete [ 3.978105] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 3.978113] ata2: hard resetting link [ 4.296066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 4.320235] ata2.00: configured for UDMA/100 [ 4.320822] ata2: EH complete [ 4.321824] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.321828] Uniform CD-ROM driver Revision: 3.20 [ 4.321925] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.321989] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.476091] Freeing unused kernel memory: 540k freed [ 4.476707] Write protecting the kernel text: 4568k [ 4.476765] Write protecting the kernel read-only data: 1836k [ 4.644384] Linux agpgart interface v0.103 [ 4.647683] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661] [ 4.652648] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 [ 4.747854] [drm] Initialized drm 1.1.0 20060810 [ 4.748829] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 4.748843] ata2: hard resetting link [ 4.769870] [drm] radeon default to kernel modesetting DISABLED. [ 4.770169] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.771284] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 4.780181] Initializing USB Mass Storage driver... [ 4.784844] usbcore: registered new interface driver hiddev [ 4.785009] scsi4 : SCSI emulation for USB Mass Storage devices [ 4.785135] usbcore: registered new interface driver usb-storage [ 4.785140] USB Mass Storage support registered. [ 4.785834] usb-storage: device found at 3 [ 4.785837] usb-storage: waiting for device to settle before scanning [ 4.789831] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input4 [ 4.789952] generic-usb 0003:062A:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:03.0-2/input0 [ 4.789973] usbcore: registered new interface driver usbhid [ 4.789977] usbhid: v2.6:USB HID core driver [ 4.792534] FDC 0 is a post-1991 82077 [ 5.068573] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 5.092736] ata2.00: configured for UDMA/100 [ 5.093322] ata2: EH complete [ 5.094607] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 5.094618] ata2: hard resetting link [ 5.412071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 5.436236] ata2.00: configured for UDMA/100 [ 5.436782] ata2: EH complete [ 5.438082] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 5.438091] ata2: hard resetting link [ 5.756069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 5.780237] ata2.00: configured for UDMA/100 [ 5.780825] ata2: EH complete [ 5.783580] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 5.783588] ata2: hard resetting link [ 6.100066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 6.124237] ata2.00: configured for UDMA/100 [ 6.124806] ata2: EH complete [ 6.126108] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 6.126116] ata2: hard resetting link [ 6.444065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 6.468735] ata2.00: configured for UDMA/100 [ 6.469327] ata2: EH complete [ 6.470624] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 6.470632] ata2: hard resetting link [ 6.788066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 6.812240] ata2.00: configured for UDMA/100 [ 6.812781] ata2: EH complete [ 8.128569] PM: Starting manual resume from disk [ 8.128575] PM: Resume from partition 8:3 [ 8.128577] PM: Checking hibernation image. [ 8.128923] PM: Resume from disk failed. [ 8.141855] EXT4-fs (sda4): barriers enabled [ 8.157737] kjournald2 starting: pid 371, dev sda4:8, commit interval 5 seconds [ 8.157746] EXT4-fs (sda4): delayed allocation enabled [ 8.157752] EXT4-fs: file extents enabled [ 8.158959] EXT4-fs: mballoc enabled [ 8.158978] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 8.835379] type=1505 audit(1257193196.642:2): operation="profile_load" pid=394 name=/usr/share/gdm/guest-session/Xsession [ 8.838309] type=1505 audit(1257193196.646:3): operation="profile_load" pid=395 name=/sbin/dhclient3 [ 8.839043] type=1505 audit(1257193196.646:4): operation="profile_load" pid=395 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 8.839447] type=1505 audit(1257193196.646:5): operation="profile_load" pid=395 name=/usr/lib/connman/scripts/dhclient-script [ 8.880212] type=1505 audit(1257193196.686:6): operation="profile_load" pid=396 name=/usr/bin/evince [ 8.891717] type=1505 audit(1257193196.698:7): operation="profile_load" pid=396 name=/usr/bin/evince-previewer [ 8.898447] type=1505 audit(1257193196.706:8): operation="profile_load" pid=396 name=/usr/bin/evince-thumbnailer [ 8.932599] type=1505 audit(1257193196.742:9): operation="profile_load" pid=398 name=/usr/lib/cups/backend/cups-pdf [ 8.933463] type=1505 audit(1257193196.742:10): operation="profile_load" pid=398 name=/usr/sbin/cupsd [ 8.953728] type=1505 audit(1257193196.762:11): operation="profile_load" pid=399 name=/usr/sbin/mysqld [ 9.784751] usb-storage: device scan complete [ 9.791242] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 9.797731] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 9.804350] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 9.810972] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 9.811636] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 9.811768] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 9.811908] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 9.812052] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 9.813830] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 9.816079] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 9.816828] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 9.817573] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 10.218596] Adding 1020088k swap on /dev/sda3. Priority:-1 extents:1 across:1020088k [ 10.551075] EXT4-fs (sda4): internal journal on sda4:8 [ 14.082848] udev: starting version 147 [ 15.111090] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 15.111108] ata2: hard resetting link [ 15.373136] __ratelimit: 6 callbacks suppressed [ 15.373141] type=1505 audit(1257189603.182:14): operation="profile_replace" pid=830 name=/usr/share/gdm/guest-session/Xsession [ 15.375577] type=1505 audit(1257189603.182:15): operation="profile_replace" pid=831 name=/sbin/dhclient3 [ 15.376340] type=1505 audit(1257189603.182:16): operation="profile_replace" pid=831 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 15.376756] type=1505 audit(1257189603.186:17): operation="profile_replace" pid=831 name=/usr/lib/connman/scripts/dhclient-script [ 15.382193] type=1505 audit(1257189603.190:18): operation="profile_replace" pid=832 name=/usr/bin/evince [ 15.396017] type=1505 audit(1257189603.202:19): operation="profile_replace" pid=832 name=/usr/bin/evince-previewer [ 15.402841] type=1505 audit(1257189603.210:20): operation="profile_replace" pid=832 name=/usr/bin/evince-thumbnailer [ 15.414727] type=1505 audit(1257189603.222:21): operation="profile_replace" pid=836 name=/usr/lib/cups/backend/cups-pdf [ 15.415588] type=1505 audit(1257189603.222:22): operation="profile_replace" pid=836 name=/usr/sbin/cupsd [ 15.419447] type=1505 audit(1257189603.226:23): operation="profile_replace" pid=837 name=/usr/sbin/mysqld [ 15.433861] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 15.456786] ata2.00: configured for UDMA/100 [ 15.457418] ata2: EH complete [ 15.458808] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 15.458824] ata2: hard resetting link [ 15.777510] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 15.800747] ata2.00: configured for UDMA/100 [ 15.801331] ata2: EH complete [ 15.802697] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 15.802709] ata2: hard resetting link [ 16.120599] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 16.144750] ata2.00: configured for UDMA/100 [ 16.145316] ata2: EH complete [ 16.152046] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 16.152059] ata2: hard resetting link [ 16.468573] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 16.492746] ata2.00: configured for UDMA/100 [ 16.494558] ata2: EH complete [ 16.495876] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 16.495889] ata2: hard resetting link [ 16.812578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 16.836741] ata2.00: configured for UDMA/100 [ 16.837301] ata2: EH complete [ 16.838591] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 16.838603] ata2: hard resetting link [ 17.156568] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 17.180239] ata2.00: configured for UDMA/100 [ 17.180796] ata2: EH complete [ 17.182095] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 17.182105] ata2: hard resetting link [ 17.500580] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 17.524754] ata2.00: configured for UDMA/100 [ 17.525310] ata2: EH complete [ 17.526599] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 17.526612] ata2: hard resetting link [ 17.617456] parport_pc 00:0a: reported by Plug and Play ACPI [ 17.617502] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.800847] lp0: using parport0 (interrupt-driven). [ 17.808766] ppdev: user-space parallel port driver [ 17.844580] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 17.868750] ata2.00: configured for UDMA/100 [ 17.869349] ata2: EH complete [ 17.870020] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 17.870032] ata2: hard resetting link [ 18.188069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 18.212745] ata2.00: configured for UDMA/100 [ 18.212979] ata2: EH complete [ 18.213922] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 18.213935] ata2: hard resetting link [ 18.532662] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 18.556768] ata2.00: configured for UDMA/100 [ 18.558037] ata2: EH complete [ 18.558822] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 18.558836] ata2: hard resetting link [ 18.876595] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 18.900740] ata2.00: configured for UDMA/100 [ 18.901001] ata2: EH complete [ 18.901628] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 18.901641] ata2: hard resetting link [ 19.139101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.171067] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned. [ 19.175222] alloc irq_desc for 19 on node -1 [ 19.175227] alloc kstat_irqs on node -1 [ 19.175237] rt2860 0000:00:0a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 19.175362] [ 19.175363] [ 19.175364] === pAd = f849e000, size = 580808 === [ 19.175365] [ 19.175368] <-- RTMPAllocAdapterBlock, Status=0 [ 19.220578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 19.248770] ata2.00: configured for UDMA/100 [ 19.249014] ata2: EH complete [ 19.250294] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 19.250307] ata2: hard resetting link [ 19.383759] alloc irq_desc for 18 on node -1 [ 19.383764] alloc kstat_irqs on node -1 [ 19.383775] CA0106 0000:00:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 19.383812] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 19.568579] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0) [ 19.592739] ata2.00: configured for UDMA/100 [ 19.593076] ata2: EH complete [ 19.593705] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 [ 19.593718] ata2: hard resetting link [ 19.612072] RX DESC f642f000 size = 2048 [ 19.612631] <-- RTMPAllocTxRxRingMemory, Status=0 [ 19.615732] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat [ 19.615736] 1. Phy Mode = 0 [ 19.615738] 2. Phy Mode = 0 [ 19.630890] 3. Phy Mode = 0 [ 19.632984] RTMPSetPhyMode: channel is out of range, use first channel=1 [ 19.632988] MCS Set = 00 00 00 00 00 [ 19.634526] <==== RTMPInitialize, Status=0 [ 19.634587] 0x1300 = 00073200