[ 0.000000] Bootdata ok (command line is root=/dev/hda3 ro quiet splash) [ 0.000000] Linux version 2.6.15-23-amd64-generic (buildd@yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fea0000 (usable) [ 0.000000] BIOS-e820: 000000001fea0000 - 000000001feae000 (ACPI data) [ 0.000000] BIOS-e820: 000000001feae000 - 000000001ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6db0 [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000001fea81ce [ 0.000000] ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x000000001feade41 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000001feadeb5 [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000001feadf6a [ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000001feadfc4 [ 0.000000] ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001fea0000 [ 0.000000] Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fea0000 [ 0.000000] On node 0 totalpages: 127908 [ 0.000000] DMA zone: 3015 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 124893 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ c34000000 size 32 MB [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB) [ 0.000000] No AGP bridge found [ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda3 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 65536 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 1600.059 MHz processor. [ 10.767336] Console: colour VGA+ 80x25 [ 10.767856] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 10.768263] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 10.776305] Memory: 503556k/522880k available (2139k kernel code, 18920k reserved, 754k data, 180k init) [ 10.835924] Calibrating delay using timer specific routine.. 3204.79 BogoMIPS (lpj=1602397) [ 10.835991] Security Framework v1.0.0 initialized [ 10.835998] SELinux: Disabled at boot. [ 10.836025] Mount-cache hash table entries: 256 [ 10.836157] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 10.836161] CPU: L2 Cache: 512K (64 bytes/line) [ 10.836164] CPU 0(1) -> Node 0 -> Core 0 [ 10.836173] mtrr: v2.0 (20020519) [ 10.836183] SMP alternatives: switching to UP code [ 10.836585] checking if image is initramfs... it is [ 11.528750] Freeing initrd memory: 7100k freed [ 11.539125] ACPI: Looking for DSDT ... not found! [ 11.554580] Using local APIC timer interrupts. [ 11.616986] Detected 12.500 MHz APIC timer. [ 11.617063] Brought up 1 CPUs [ 11.617102] time.c: Using PIT/TSC based timekeeping. [ 11.617105] testing NMI watchdog ... OK. [ 11.627445] NET: Registered protocol family 16 [ 11.627475] ACPI: bus type pci registered [ 11.627483] PCI: Using configuration type 1 [ 11.632125] PCI: Using MMCONFIG at e0000000 [ 11.632786] ACPI: Subsystem revision 20051216 [ 11.637711] ACPI: Interpreter enabled [ 11.637714] ACPI: Using IOAPIC for interrupt routing [ 11.638225] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.638228] PCI: Probing PCI hardware (bus 00) [ 11.642817] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 [ 11.643203] Boot video device is 0000:01:00.0 [ 11.644085] PCI: Transparent bridge - 0000:00:14.4 [ 11.644189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.648492] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 11.648777] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 11.649053] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 11.649324] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 11.649609] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 11.649881] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 11.650155] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 11.650424] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 11.651025] ACPI: Embedded Controller [EC0] (gpe 3) interrupt mode. [ 11.686501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 11.686723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 11.687027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 11.687464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 11.688119] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.688134] pnp: PnP ACPI init [ 11.695183] pnp: PnP ACPI: found 9 devices [ 11.695200] PCI: Using ACPI for IRQ routing [ 11.695203] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.695212] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 [ 11.695264] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0 [ 11.695312] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0 [ 11.695360] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0 [ 11.695574] PCI-DMA: Disabling IOMMU. [ 11.695812] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved [ 11.695816] pnp: 00:07: ioport range 0x1200-0x120f has been reserved [ 11.695819] pnp: 00:07: ioport range 0x500-0x51f has been reserved [ 11.695823] pnp: 00:07: ioport range 0x40b-0x40b has been reserved [ 11.696007] PCI: Bridge: 0000:00:02.0 [ 11.696010] IO window: 9000-9fff [ 11.696015] MEM window: c0100000-c01fffff [ 11.696018] PREFETCH window: c8000000-cfffffff [ 11.696021] PCI: Bridge: 0000:00:06.0 [ 11.696023] IO window: disabled. [ 11.696025] MEM window: disabled. [ 11.696027] PREFETCH window: disabled. [ 11.696030] PCI: Bridge: 0000:00:07.0 [ 11.696031] IO window: disabled. [ 11.696033] MEM window: disabled. [ 11.696036] PREFETCH window: disabled. [ 11.696047] PCI: Bus 7, cardbus bridge: 0000:06:06.0 [ 11.696050] IO window: 0000a400-0000a4ff [ 11.696056] IO window: 0000a800-0000a8ff [ 11.696063] PREFETCH window: 30000000-31ffffff [ 11.696070] MEM window: 34000000-35ffffff [ 11.696075] PCI: Bridge: 0000:00:14.4 [ 11.696079] IO window: a000-afff [ 11.696086] MEM window: c0200000-c02fffff [ 11.696091] PREFETCH window: 30000000-32ffffff [ 11.696105] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 11.696112] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 11.696118] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 11.696149] GSI 16 sharing vector 0xB9 and IRQ 16 [ 11.696152] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 185 [ 11.696408] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 11.696743] audit: initializing netlink socket (disabled) [ 11.696753] audit(1148950141.930:1): initialized [ 11.696904] VFS: Disk quotas dquot_6.5.1 [ 11.696928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 11.696987] Initializing Cryptographic API [ 11.696991] io scheduler noop registered [ 11.696999] io scheduler anticipatory registered [ 11.697006] io scheduler deadline registered [ 11.697022] io scheduler cfq registered [ 11.697513] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 11.697518] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS [ 11.697535] assign_interrupt_mode Found MSI capability [ 11.697575] Allocate Port Service[pcie00] [ 11.697612] Allocate Port Service[pcie01] [ 11.697648] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 11.697651] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS [ 11.697667] assign_interrupt_mode Found MSI capability [ 11.697688] Allocate Port Service[pcie00] [ 11.697714] Allocate Port Service[pcie01] [ 11.697743] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 11.697747] pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS [ 11.697763] assign_interrupt_mode Found MSI capability [ 11.697786] Allocate Port Service[pcie00] [ 11.697817] Allocate Port Service[pcie01] [ 11.712277] Real Time Clock Driver v1.12 [ 11.712318] Linux agpgart interface v0.101 (c) Dave Jones [ 11.712428] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.712610] i8042.c: Detected active multiplexing controller, rev 1.1. [ 11.712665] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 11.712715] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 11.712756] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 11.712802] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 11.712845] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.712883] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 11.714733] GSI 17 sharing vector 0xE1 and IRQ 17 [ 11.714738] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 225 [ 11.714749] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 11.715131] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.715185] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 11.715189] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 11.715457] mice: PS/2 mouse device common for all mice [ 11.715630] NET: Registered protocol family 2 [ 11.723916] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 11.724106] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 11.724352] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 11.724618] TCP: Hash tables configured (established 16384 bind 16384) [ 11.724621] TCP reno registered [ 11.724716] TCP bic registered [ 11.724726] NET: Registered protocol family 1 [ 11.724735] NET: Registered protocol family 8 [ 11.724737] NET: Registered protocol family 20 [ 11.724912] ACPI wakeup devices: [ 11.724920] LID0 SLPB OHC1 OHC2 EHCI P2P MODM [ 11.724928] ACPI: (supports S0 S3 S4 S5) [ 11.724997] Freeing unused kernel memory: 180k freed [ 11.769242] vga16fb: initializing [ 11.769248] vga16fb: mapped to 0xffff8100000a0000 [ 11.903851] Console: switching to colour frame buffer device 80x25 [ 11.903856] fb0: VGA16 VGA frame buffer device [ 12.320559] input: AT Translated Set 2 keyboard as /class/input/input0 [ 12.990209] Capability LSM initialized [ 13.021677] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.181334] ACPI: Thermal Zone [TZS0] (59 C) [ 13.231416] ACPI: Thermal Zone [TZS1] (51 C) [ 13.280339] ACPI: Thermal Zone [TZSV] (57 C) [ 13.890594] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 13.890615] GSI 18 sharing vector 0xE9 and IRQ 18 [ 13.890619] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 233 [ 13.890632] ATIIXP: chipset revision 0 [ 13.890635] ATIIXP: not 100% native mode: will probe irqs later [ 13.890645] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio [ 13.890660] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio [ 13.890682] Probing IDE interface ide0... [ 14.154669] hda: IC25N080ATMR04-0, ATA DISK drive [ 14.765484] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 14.787460] Probing IDE interface ide1... [ 15.458442] hdc: MATSHITAUJ-845D, ATAPI CD/DVD-ROM drive [ 15.763791] ide1 at 0x170-0x177,0x376 on irq 15 [ 15.774696] hda: max request size: 1024KiB [ 15.778144] hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) [ 15.778426] hda: cache flushes supported [ 15.778620] hda: hda1 hda2 < hda5 hda6 > hda3 [ 15.865272] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 15.865282] Uniform CD-ROM driver Revision: 3.20 [ 16.365372] usbcore: registered new driver usbfs [ 16.365997] usbcore: registered new driver hub [ 16.366922] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 16.366960] GSI 19 sharing vector 0x32 and IRQ 19 [ 16.366964] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 50 [ 16.367082] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 16.585468] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 16.585482] ohci_hcd 0000:00:13.0: irq 50, io mem 0xc0000000 [ 16.589704] ieee1394: Initialized config rom entry `ip1394' [ 16.640104] hub 1-0:1.0: USB hub found [ 16.640120] hub 1-0:1.0: 4 ports detected [ 16.740976] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 50 [ 16.741113] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 16.953653] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 16.953662] ohci_hcd 0000:00:13.1: irq 50, io mem 0xc0001000 [ 17.008638] hub 2-0:1.0: USB hub found [ 17.008651] hub 2-0:1.0: 4 ports detected [ 17.111138] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 50 [ 17.111375] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 17.111686] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 17.111695] ehci_hcd 0000:00:13.2: irq 50, io mem 0xc0002000 [ 17.111710] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.112004] hub 3-0:1.0: USB hub found [ 17.112013] hub 3-0:1.0: 8 ports detected [ 17.212943] ohci1394: $Rev: 1313 $ Ben Collins [ 17.212975] GSI 20 sharing vector 0x3A and IRQ 20 [ 17.212980] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 58 [ 17.263517] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[c0208000-c02087ff] Max Packet=[2048] [ 17.491064] Attempting manual resume [ 17.530296] EXT3-fs: mounted filesystem with ordered data mode. [ 17.549906] kjournald starting. Commit interval 5 seconds [ 17.610323] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 18.517017] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678] [ 27.195709] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 27.206971] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.906379] r8169 Gigabit Ethernet driver 2.2LK loaded [ 27.906414] GSI 22 sharing vector 0x42 and IRQ 22 [ 27.906418] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 66 [ 27.907534] eth0: Identified chip type is 'RTL8169s/8110s'. [ 27.907539] eth0: RTL8169 at 0xffffc200100a0400, 00:0a:e4:e0:ef:61, IRQ 66 [ 27.933808] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 185 [ 27.933824] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080] [ 27.933852] Yenta: Using CSCINT to route CSC interrupts to PCI [ 27.933855] Yenta: Routing CardBus interrupts to PCI [ 27.933862] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64 [ 28.114184] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 225 [ 28.157225] Yenta: ISA IRQ mask 0x0ef8, PCI irq 185 [ 28.157231] Socket status: 30000006 [ 28.157234] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08 [ 28.157241] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 28.157246] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff [ 28.157298] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff [ 28.174351] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 225 [ 28.218423] MC'97 1 converters and GPIO not ready (0xff00) [ 28.230928] sdhci: Secure Digital Host Controller Interface driver, 0.10 [ 28.230933] sdhci: Copyright(c) Pierre Ossman [ 28.240610] input: PC Speaker as /class/input/input1 [ 28.624649] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 28.655386] usbcore: registered new driver hiddev [ 28.656156] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 28.658390] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 [ 28.677227] input: A4Tech USB Optical Mouse as /class/input/input3 [ 28.677290] input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.1-2 [ 28.677302] usbcore: registered new driver usbhid [ 28.677305] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 28.688114] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 185 [ 28.738981] sdhci: ============== REGISTER DUMP ============== [ 28.738991] sdhci: Sys addr: 0x00000000 | Version: 0x00008400 [ 28.738997] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 28.739003] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 28.739009] sdhci: Present: 0x00020000 | Host ctl: 0x00000000 [ 28.739015] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 28.739021] sdhci: Walk up: 0x00000000 | Clock: 0x00000002 [ 28.739027] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 28.739034] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [ 28.739040] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 28.739046] sdhci: Caps: 0x01821090 | Max curr: 0x00000000 [ 28.739048] sdhci: =========================================== [ 28.789205] mmc0: SDHCI at 0xc0209000 irq 185 DMA [ 28.889196] sdhci: ============== REGISTER DUMP ============== [ 28.889205] sdhci: Sys addr: 0x00000000 | Version: 0x00008400 [ 28.889211] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 28.889217] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 28.889223] sdhci: Present: 0x00020000 | Host ctl: 0x00000000 [ 28.889229] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 28.889235] sdhci: Walk up: 0x00000000 | Clock: 0x00000002 [ 28.889241] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 28.889247] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [ 28.889253] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 28.889259] sdhci: Caps: 0x01821090 | Max curr: 0x00000000 [ 28.889261] sdhci: =========================================== [ 28.939340] mmc1: SDHCI at 0xc0208c00 irq 185 DMA [ 29.039253] sdhci: ============== REGISTER DUMP ============== [ 29.039263] sdhci: Sys addr: 0x00000000 | Version: 0x00008400 [ 29.039269] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 29.039275] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 29.039281] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000 [ 29.039287] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 29.039292] sdhci: Walk up: 0x00000000 | Clock: 0x00000002 [ 29.039298] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 29.039305] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [ 29.039311] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 29.039317] sdhci: Caps: 0x01821898 | Max curr: 0x00000000 [ 29.039319] sdhci: =========================================== [ 29.089488] mmc2: SDHCI at 0xc0208800 irq 185 DMA [ 29.310917] ts: Compaq touchscreen protocol output [ 31.089090] lp: driver loaded but no devices found [ 31.263264] SCSI subsystem initialized [ 31.276520] sbp2: $Rev: 1306 $ Ben Collins [ 31.276525] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 31.276528] ieee1394: sbp2: Try serialize_io=0 for better performance [ 31.407493] acer_acpi: Acer Laptop ACPI Extras version 0.3 [ 31.466547] ndiswrapper version 1.17rc2 loaded (preempt=yes,smp=yes) [ 31.798960] ndiswrapper (load_pe_images:573): fixing KI_USER_SHARED_DATA address in the driver [ 31.800591] ndiswrapper: driver bcmwl5 (Broadcom,02/11/2005, 3.100.64.0) loaded [ 31.800813] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 177 [ 31.809155] ndiswrapper: using irq 177 [ 32.314173] wlan0: vendor: '' [ 32.314179] wlan0: ndiswrapper ethernet device 00:0e:9b:bf:c9:d4 using driver bcmwl5, 14E4:4318.5.conf [ 32.314200] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 32.359296] Adding 1116476k swap on /dev/hda6. Priority:-1 extents:1 across:1116476k [ 32.762757] EXT3 FS on hda3, internal journal [ 32.982180] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 32.982185] md: bitmap version 4.39 [ 33.793146] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 34.690092] cdrom: open failed. [ 38.420399] ACPI: AC Adapter [ADP1] (on-line) [ 38.606932] ACPI: Battery Slot [BAT0] (battery present) [ 38.746121] ACPI: Power Button (FF) [PWRF] [ 38.746139] ACPI: Lid Switch [LID0] [ 38.746147] ACPI: Sleep Button (CM) [SLPB] [ 38.843887] ibm_acpi: ec object not found [ 38.866369] pcc_acpi: loading... [ 38.976527] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 38.976920] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 39.497724] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [ 39.497774] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4 (1450 mV) [ 39.497778] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 (1000 mV) [ 39.497783] cpu_init done, current fid 0x8, vid 0x4 [ 44.097659] r8169: eth1: link down [ 48.517259] [fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes. [ 48.517554] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0 [ 48.525212] GSI 23 sharing vector 0x4A and IRQ 23 [ 48.525220] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 74 [ 50.531982] [fglrx] total GART = 67108864 [ 50.531990] [fglrx] free GART = 51118080 [ 50.531993] [fglrx] max single GART = 51118080 [ 50.531996] [fglrx] total LFB = 127954944 [ 50.531998] [fglrx] free LFB = 119762944 [ 50.532001] [fglrx] max single LFB = 119762944 [ 50.532003] [fglrx] total Inv = 0 [ 50.532005] [fglrx] free Inv = 0 [ 50.532007] [fglrx] max single Inv = 0 [ 50.532009] [fglrx] total TIM = 0 [ 51.621802] ppdev: user-space parallel port driver [ 52.213634] Bluetooth: Core ver 2.8 [ 52.213640] NET: Registered protocol family 31 [ 52.213642] Bluetooth: HCI device and connection manager initialized [ 52.213656] Bluetooth: HCI socket layer initialized [ 52.266414] Bluetooth: L2CAP ver 2.8 [ 52.266419] Bluetooth: L2CAP socket layer initialized [ 52.270845] Bluetooth: RFCOMM socket layer initialized [ 52.270865] Bluetooth: RFCOMM TTY layer initialized [ 52.270867] Bluetooth: RFCOMM ver 1.7 [ 52.785794] acer_acpi: Wireless value 1 [ 61.466359] NET: Registered protocol family 10 [ 61.466455] lo: Disabled Privacy Extensions [ 61.466501] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 61.466588] IPv6 over IPv4 tunneling driver [ 66.567985] eth0: no IPv6 routers present [ 89.030325] eth0: no IPv6 routers present [ 110.961379] Losing some ticks... checking if CPU frequency changed.