[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) [ 0.000000] BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130928 [ 0.000000] HighMem 130928 -> 130928 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130928 [ 0.000000] On node 0 totalpages: 130928 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125842 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F69D0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 1FF78079, 0030 (r1 SONY G4 20041018 PTL 0) [ 0.000000] ACPI: FACP 1FF7BEC2, 0084 (r2 SONY G4 20041018 PTL 50) [ 0.000000] ACPI: DSDT 1FF78515, 39AD (r1 SONY G4 20041018 PTL 100000E) [ 0.000000] ACPI: FACS 1FF7CFC0, 0040 [ 0.000000] ACPI: BOOT 1FF7BFD8, 0028 (r1 SONY G4 20041018 PTL 1) [ 0.000000] ACPI: SSDT 1FF780A9, 02D8 (r1 SONY G4 20041018 PTL 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] Built 1 zonelists. Total pages: 129906 [ 0.000000] Kernel command line: root=UUID=a369dff7-da2d-43e4-9f8d-142282ba50b4 ro quiet splash vga=0 [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0140c000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1696.770 MHz processor. [ 7.611667] Console: colour VGA+ 80x25 [ 7.611976] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 7.612279] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 7.627490] Memory: 507660k/523712k available (2017k kernel code, 15452k reserved, 918k data, 364k init, 0k highmem) [ 7.627500] virtual kernel memory layout: [ 7.627502] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 7.627503] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 7.627504] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 7.627506] lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) [ 7.627507] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 7.627508] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 7.627509] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 7.627513] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.627551] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 7.707507] Calibrating delay using timer specific routine.. 3395.84 BogoMIPS (lpj=6791685) [ 7.707534] Security Framework v1.0.0 initialized [ 7.707542] SELinux: Disabled at boot. [ 7.707557] Mount-cache hash table entries: 512 [ 7.707684] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [ 7.707696] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.707699] CPU: L2 cache: 2048K [ 7.707702] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 [ 7.707712] Compat vDSO mapped to ffffe000. [ 7.707724] Checking 'hlt' instruction... OK. [ 7.723598] SMP alternatives: switching to UP code [ 7.723796] Freeing SMP alternatives: 11k freed [ 7.724051] Early unpacking initramfs... done [ 8.067803] ACPI: Core revision 20070126 [ 8.067861] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.071635] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 [ 8.071641] SMP motherboard not detected. [ 8.071643] Local APIC not detected. Using dummy APIC emulation. [ 8.071677] Brought up 1 CPUs [ 8.071788] Booting paravirtualized kernel on bare hardware [ 8.071849] Time: 21:55:51 Date: 09/01/107 [ 8.071870] NET: Registered protocol family 16 [ 8.071945] EISA bus registered [ 8.071958] ACPI: bus type pci registered [ 8.079381] PCI: PCI BIOS revision 2.10 entry at 0xfd9c3, last bus=2 [ 8.079383] PCI: Using configuration type 1 [ 8.079385] Setting up standard PCI resources [ 8.091344] ACPI: EC: Look up EC in DSDT [ 8.091742] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 8.092731] ACPI: Interpreter enabled [ 8.092733] ACPI: (supports S0 S3 S4 S5) [ 8.092747] ACPI: Using PIC for interrupt routing [ 8.096566] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 8.096604] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 8.096618] PCI: Probing PCI hardware (bus 00) [ 8.096971] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 8.096975] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 8.097408] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 8.097512] PCI: Transparent bridge - 0000:00:1e.0 [ 8.097577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.097801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 8.097872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 8.101683] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) [ 8.101756] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled. [ 8.101827] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled. [ 8.101898] ACPI: PCI Interrupt Link [LNKD] (IRQs *9) [ 8.101967] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) [ 8.102037] ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled. [ 8.102107] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. [ 8.102177] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled. [ 8.102255] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8.102268] pnp: PnP ACPI init [ 8.102275] ACPI: bus type pnp registered [ 8.103766] pnp: PnP ACPI: found 9 devices [ 8.103768] ACPI: ACPI bus type pnp unregistered [ 8.103771] PnPBIOS: Disabled by ACPI PNP [ 8.103810] PCI: Using ACPI for IRQ routing [ 8.103812] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 8.109234] NET: Registered protocol family 8 [ 8.109236] NET: Registered protocol family 20 [ 8.109284] pnp: 00:04: iomem range 0xfebfe000-0xfebfefff has been reserved [ 8.109288] pnp: 00:04: iomem range 0xfebff000-0xfebfffff has been reserved [ 8.109291] pnp: 00:04: iomem range 0xfec00000-0xfec00fff has been reserved [ 8.111180] Time: tsc clocksource has been installed. [ 8.139524] PCI: Bridge: 0000:00:01.0 [ 8.139526] IO window: 3000-3fff [ 8.139530] MEM window: d0100000-d01fffff [ 8.139533] PREFETCH window: d8000000-dfffffff [ 8.139541] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 8.139544] IO window: 00004400-000044ff [ 8.139548] IO window: 00004800-000048ff [ 8.139552] PREFETCH window: 30000000-33ffffff [ 8.139556] MEM window: 38000000-3bffffff [ 8.139560] PCI: Bridge: 0000:00:1e.0 [ 8.139562] IO window: 4000-4fff [ 8.139568] MEM window: d0200000-d02fffff [ 8.139572] PREFETCH window: 30000000-33ffffff [ 8.139586] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 8.139715] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 [ 8.139718] PCI: setting IRQ 9 as level-triggered [ 8.139720] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 8.139735] NET: Registered protocol family 2 [ 8.179155] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 8.179191] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 8.179348] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 8.179457] TCP: Hash tables configured (established 16384 bind 16384) [ 8.179460] TCP reno registered [ 8.191222] checking if image is initramfs... it is [ 8.642778] Switched to high resolution mode on CPU 0 [ 8.869421] Freeing initrd memory: 7076k freed [ 8.869591] Simple Boot Flag at 0x36 set to 0x1 [ 8.869814] audit: initializing netlink socket (disabled) [ 8.869832] audit(1191275751.988:1): initialized [ 8.871695] VFS: Disk quotas dquot_6.5.1 [ 8.871745] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.871840] io scheduler noop registered [ 8.871843] io scheduler anticipatory registered [ 8.871845] io scheduler deadline registered [ 8.871859] io scheduler cfq registered (default) [ 8.871931] Boot video device is 0000:01:00.0 [ 8.872125] isapnp: Scanning for PnP cards... [ 9.225851] isapnp: No Plug & Play device found [ 9.250038] Real Time Clock Driver v1.12ac [ 9.250163] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 9.251054] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 9.251059] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 9.251069] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 9.251598] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 9.251811] input: Macintosh mouse button emulation as /class/input/input0 [ 9.251883] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 9.254831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.254836] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 9.254984] mice: PS/2 mouse device common for all mice [ 9.255081] EISA: Probing bus 0 at eisa.0 [ 9.255089] Cannot allocate resource for EISA slot 1 [ 9.255092] Cannot allocate resource for EISA slot 2 [ 9.255094] Cannot allocate resource for EISA slot 3 [ 9.255096] Cannot allocate resource for EISA slot 4 [ 9.255114] EISA: Detected 0 cards. [ 9.255217] TCP cubic registered [ 9.255234] NET: Registered protocol family 1 [ 9.255258] Using IPI No-Shortcut mode [ 9.255432] Magic number: 11:218:954 [ 9.255444] hash matches device ttya9 [ 9.255497] hash matches device ptyzb [ 9.255839] Freeing unused kernel memory: 364k freed [ 9.294197] input: AT Translated Set 2 keyboard as /class/input/input1 [ 10.440336] AppArmor: AppArmor initialized<5>audit(1191275753.488:2): type=1505 info="AppArmor initialized" pid=1185 [ 10.448047] fuse init (API version 7.8) [ 10.452917] Failure registering capabilities with primary security module. [ 10.474042] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 10.474047] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.852000] Marking TSC unstable due to: possible TSC halt in C2. [ 2.852000] ACPI: Thermal Zone [ATF0] (39 C) [ 2.856000] Time: acpi_pm clocksource has been installed. [ 3.192000] usbcore: registered new interface driver usbfs [ 3.192000] usbcore: registered new interface driver hub [ 3.192000] usbcore: registered new device driver usb [ 3.192000] USB Universal Host Controller Interface driver v3.0 [ 3.192000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 3.192000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 3.192000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.192000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.192000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.192000] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800 [ 3.192000] usb usb1: configuration #1 chosen from 1 choice [ 3.192000] hub 1-0:1.0: USB hub found [ 3.192000] hub 1-0:1.0: 2 ports detected [ 3.284000] SCSI subsystem initialized [ 3.288000] libata version 2.21 loaded. [ 3.296000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 3.296000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 3.296000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.296000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.296000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 3.296000] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001820 [ 3.296000] usb usb2: configuration #1 chosen from 1 choice [ 3.296000] hub 2-0:1.0: USB hub found [ 3.296000] hub 2-0:1.0: 2 ports detected [ 3.336000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 3.336000] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.400000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 3.400000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 3.400000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.400000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.400000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 3.400000] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001840 [ 3.400000] usb usb3: configuration #1 chosen from 1 choice [ 3.400000] hub 3-0:1.0: USB hub found [ 3.400000] hub 3-0:1.0: 2 ports detected [ 3.504000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 [ 3.504000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 3.504000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.504000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.504000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 3.504000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.504000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.504000] ehci_hcd 0000:00:1d.7: irq 9, io mem 0xd0000000 [ 3.508000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.508000] usb usb4: configuration #1 chosen from 1 choice [ 3.508000] hub 4-0:1.0: USB hub found [ 3.508000] hub 4-0:1.0: 6 ports detected [ 3.612000] ata_piix 0000:00:1f.1: version 2.11 [ 3.612000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 3.612000] ACPI: Unable to derive IRQ for device 0000:00:1f.1 [ 3.612000] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI [ 3.612000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 3.612000] scsi0 : ata_piix [ 3.624000] scsi1 : ata_piix [ 3.624000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 3.624000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 3.788000] ata1.00: ATA-6: TOSHIBA MK6025GAS, KA200A, max UDMA/100 [ 3.788000] ata1.00: 117210240 sectors, multi 16: LBA [ 3.796000] ata1.00: configured for UDMA/100 [ 4.272000] ata2.00: ATAPI: UJDA755 DVD/CDRW, 1.00, max UDMA/33 [ 4.444000] ata2.00: configured for UDMA/33 [ 4.444000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6025GA KA20 PQ: 0 ANSI: 5 [ 4.444000] scsi 1:0:0:0: CD-ROM MATSHITA UJDA755 DVD/CDRW 1.00 PQ: 0 ANSI: 5 [ 4.444000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 [ 4.444000] ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 4.496000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[d0207000-d02077ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.496000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 4.520000] e100: eth0: e100_probe: addr 0xd0205000, irq 9, MAC addr 00:01:4A:01:78:A7 [ 4.536000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.536000] sd 0:0:0:0: [sda] Write Protect is off [ 4.536000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.536000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.536000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.536000] sd 0:0:0:0: [sda] Write Protect is off [ 4.536000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.536000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.536000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 4.636000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.640000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.640000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.660000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 4.660000] Uniform CD-ROM driver Revision: 3.20 [ 4.660000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.984000] kjournald starting. Commit interval 5 seconds [ 4.984000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.768000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301b6d8f1] [ 21.536000] Linux agpgart interface v0.102 (c) Dave Jones [ 21.548000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.564000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.672000] iTCO_vendor_support: vendor-support=0 [ 21.672000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 21.672000] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 21.672000] iTCO_wdt: No card detected [ 21.708000] agpgart: Detected an Intel 855PM Chipset. [ 21.724000] agpgart: AGP aperture is 256M @ 0xe0000000 [ 21.724000] intel_rng: FWH not detected [ 22.344000] input: PS/2 Mouse as /class/input/input2 [ 22.360000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 22.396000] Yenta: CardBus bridge found at 0000:02:04.0 [104d:818f] [ 22.396000] Yenta: Enabling burst memory read transactions [ 22.396000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 22.396000] Yenta: Routing CardBus interrupts to PCI [ 22.396000] Yenta TI: socket 0000:02:04.0, mfunc 0x01001b22, devctl 0x64 [ 22.628000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 9 [ 22.628000] Socket status: 30000006 [ 22.628000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 22.628000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 22.628000] cs: IO port probe 0x4000-0x4fff: clean. [ 22.628000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 22.628000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff [ 22.644000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 [ 22.644000] PCI: setting IRQ 5 as level-triggered [ 22.644000] ACPI: PCI Interrupt 0000:02:04.3[B] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5 [ 22.668000] tifm_core: MMC/SD card detected in socket 0:0 [ 22.740000] ieee80211_crypt: registered algorithm 'NULL' [ 22.744000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 22.744000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 22.828000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 22.828000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 22.828000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 22.828000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 23.036000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 23.252000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 [ 23.256000] cs: IO port probe 0xc00-0xcf7: clean. [ 23.256000] cs: IO port probe 0xa00-0xaff: clean. [ 23.300000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 23.300000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 24.228000] intel8x0_measure_ac97_clock: measured 55478 usecs [ 24.228000] intel8x0: clocking to 48000 [ 24.608000] lp: driver loaded but no devices found [ 24.768000] Adding 995988k swap on /dev/sda6. Priority:-1 extents:1 across:995988k [ 25.280000] EXT3 FS on sda3, internal journal [ 25.992000] kjournald starting. Commit interval 5 seconds [ 25.996000] EXT3 FS on sda5, internal journal [ 25.996000] EXT3-fs: mounted filesystem with ordered data mode. [ 27.104000] Netfilter messages via NETLINK v0.30. [ 27.108000] nf_conntrack version 0.5.0 (4091 buckets, 32728 max) [ 27.156000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.092000] ACPI: AC Adapter [ACAD] (on-line) [ 28.132000] ACPI: Battery Slot [BAT1] (battery present) [ 28.152000] No dock devices found. [ 28.232000] input: Lid Switch as /class/input/input4 [ 28.236000] ACPI: Lid Switch [LID0] [ 28.284000] input: Power Button (CM) as /class/input/input5 [ 28.284000] ACPI: Power Button (CM) [PWRB] [ 32.160000] NET: Registered protocol family 10 [ 32.160000] lo: Disabled Privacy Extensions [ 32.160000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.160000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 32.700000] ppdev: user-space parallel port driver [ 33.484000] audit(1191297384.869:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4777 profile="/usr/sbin/cupsd" [ 34.216000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 34.216000] apm: overridden by ACPI. [ 34.320000] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 34.324000] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers [ 34.324000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 34.324000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 34.324000] sonypi: device allocated minor is 63 [ 34.372000] input: Sony Vaio Jogdial as /class/input/input6 [ 34.428000] input: Sony Vaio Keys as /class/input/input7 [ 34.476000] sony-laptop: Sony Notebook Control Driver v0.5. [ 34.520000] input: Sony Vaio Keys as /class/input/input8 [ 34.540000] input: Sony Vaio Jogdial as /class/input/input9 [ 41.016000] Clocksource tsc unstable (delta = -225185308 ns) [ 41.084000] Failure registering capabilities with primary security module. [ 41.596000] Bluetooth: Core ver 2.11 [ 41.596000] NET: Registered protocol family 31 [ 41.596000] Bluetooth: HCI device and connection manager initialized [ 41.596000] Bluetooth: HCI socket layer initialized [ 41.628000] Bluetooth: L2CAP ver 2.8 [ 41.628000] Bluetooth: L2CAP socket layer initialized [ 41.744000] Bluetooth: RFCOMM socket layer initialized [ 41.744000] Bluetooth: RFCOMM TTY layer initialized [ 41.744000] Bluetooth: RFCOMM ver 1.8 [ 45.756000] ieee80211_crypt: registered algorithm 'WEP' [ 46.080000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 47.376000] NET: Registered protocol family 17 [ 56.452000] eth1: no IPv6 routers present [ 110.900000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 111.256000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 126.892000] eth1: no IPv6 routers present [ 215.880000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 215.960000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 216.044000] Failure registering capabilities with primary security module. [ 231.140000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 247.660000] eth1: no IPv6 routers present [ 641.060000] [drm] Initialized drm 1.1.0 20060810 [ 641.088000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 641.088000] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 644.600000] [drm] Setting GART location based on new memory map [ 644.600000] [drm] Loading R300 Microcode [ 644.600000] [drm] writeback test succeeded in 1 usecs [ 707.800000] mtrr: no MTRR for d8000000,4000000 found [ 712.620000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 712.620000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 712.620000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 713.544000] [drm] Setting GART location based on new memory map [ 713.544000] [drm] Loading R300 Microcode [ 713.560000] [drm] writeback test failed