[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-999-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201210030422 SMP Wed Oct 3 08:23:46 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.6.0-999-generic root=/dev/mapper/vg1-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000097000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff80fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffe2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe3000-0x00000000cffeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: Phoenix Technologies RS780+SB700/LP JR 790GX-M3H5, BIOS 6.00 PG 04/09/2009 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcff81 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4c00-0x000f4c0f] mapped at [ffff8800000f4c00] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcff80fff] [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcff80fff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcff80fff @ [mem 0x1f9fd000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x11fffffff @ [mem 0xcff7f000-0xcff80fff] [ 0.000000] RAMDISK: [mem 0x35528000-0x36a8bfff] [ 0.000000] ACPI: RSDP 00000000000f8c60 00024 (v02 RS780D) [ 0.000000] ACPI: RSDT 00000000cffe3000 00038 (v01 RS780D AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000cffe3080 00074 (v01 RS780D AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000cffe3100 08C5A (v01 RS780D AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cffe0000 00040 [ 0.000000] ACPI: SSDT 00000000cffebe40 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cffec700 00038 (v01 RS780D AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000cffec740 0003C (v01 RS780D AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000cffebd80 00084 (v01 RS780D AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fffc000-0x11fffffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ba00000-ffff88011f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00096fff] [ 0.000000] node 0: [mem 0x00100000-0xcff80fff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 982792 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3905 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831425 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff81000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffe3000 [ 0.000000] PM: Registered nosave memory: 00000000cffe3000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s84736 r8192 d21760 u524288 [ 0.000000] pcpu-alloc: s84736 r8192 d21760 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964354 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.6.0-999-generic root=/dev/mapper/vg1-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 3699908k/4718592k available (6866k kernel code, 787424k absent, 231260k reserved, 6309k data, 980k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3000.074 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.14 BogoMIPS (lpj=12000296) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000022] Security Framework initialized [ 0.000031] AppArmor: AppArmor initialized [ 0.000279] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001646] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002280] Mount-cache hash table entries: 256 [ 0.002451] Initializing cgroup subsys cpuacct [ 0.002453] Initializing cgroup subsys devices [ 0.002454] Initializing cgroup subsys freezer [ 0.002455] Initializing cgroup subsys blkio [ 0.002457] Initializing cgroup subsys perf_event [ 0.002474] tseg: 0000000000 [ 0.002484] CPU: Physical Processor ID: 0 [ 0.002485] CPU: Processor Core ID: 0 [ 0.002487] mce: CPU supports 6 MCE banks [ 0.002491] LVT offset 0 assigned for vector 0xf9 [ 0.002495] process: using AMD E400 aware idle routine [ 0.002497] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.002497] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.002497] tlb_flushall_shift: 4 [ 0.002582] Freeing SMP alternatives: 24k freed [ 0.003845] ACPI: Core revision 20120711 [ 0.016743] ftrace: allocating 27961 entries in 110 pages [ 0.027255] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066911] smpboot: CPU0: AMD Phenom(tm) II X4 945 Processor (fam: 10, model: 04, stepping: 02) [ 0.171055] Performance Events: AMD PMU driver. [ 0.171058] ... version: 0 [ 0.171059] ... bit width: 48 [ 0.171060] ... generic registers: 4 [ 0.171061] ... value mask: 0000ffffffffffff [ 0.171062] ... max period: 00007fffffffffff [ 0.171062] ... fixed-purpose events: 0 [ 0.171063] ... event mask: 000000000000000f [ 0.171743] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.171803] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.210983] Brought up 4 CPUs [ 0.210984] smpboot: Total of 4 processors activated (24000.59 BogoMIPS) [ 0.215684] devtmpfs: initialized [ 0.216713] EVM: security.selinux [ 0.216714] EVM: security.SMACK64 [ 0.216715] EVM: security.capability [ 0.216795] PM: Registering ACPI NVS region [mem 0xcffe0000-0xcffe2fff] (12288 bytes) [ 0.217569] regulator-dummy: no parameters [ 0.217599] RTC time: 12:02:19, date: 10/03/12 [ 0.217632] NET: Registered protocol family 16 [ 0.217719] node 0 link 0: io port [c000, ffff] [ 0.217721] TOM: 00000000d0000000 aka 3328M [ 0.217723] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.217724] node 0 link 0: mmio [a0000, bffff] [ 0.217726] node 0 link 0: mmio [d0000000, dfffffff] [ 0.217728] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.217730] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.217732] TOM2: 0000000130000000 aka 4864M [ 0.217733] bus: [bus 00-03] on node 0 link 0 [ 0.217734] bus: 00 [io 0x0000-0xffff] [ 0.217736] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.217736] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.217737] bus: 00 [mem 0xe0400000-0xffffffff] [ 0.217738] bus: 00 [mem 0xe0100000-0xe03fffff] [ 0.217739] bus: 00 [mem 0x130000000-0xfcffffffff] [ 0.217814] ACPI: bus type pci registered [ 0.217862] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.217864] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.227965] PCI: Using configuration type 1 for base access [ 0.228103] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.228104] mtrr: probably your BIOS does not setup all CPUs. [ 0.228105] mtrr: corrected configuration. [ 0.228737] bio: create slab at 0 [ 0.228805] ACPI: Added _OSI(Module Device) [ 0.228806] ACPI: Added _OSI(Processor Device) [ 0.228807] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.228808] ACPI: Added _OSI(Processor Aggregator Device) [ 0.229391] ACPI: EC: Look up EC in DSDT [ 0.233317] ACPI: Interpreter enabled [ 0.233321] ACPI: (supports S0 S3 S4 S5) [ 0.233332] ACPI: Using IOAPIC for interrupt routing [ 0.310515] ACPI: No dock devices found. [ 0.310519] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.310556] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.310625] PCI host bridge to bus 0000:00 [ 0.310628] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.310630] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.310631] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.310633] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.310635] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.310636] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff] [ 0.310646] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.310656] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.310690] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400 [ 0.310730] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.310759] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.310797] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.310815] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.310824] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.310833] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.310842] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.310850] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.310859] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.310913] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.310926] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.310987] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.310999] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.311066] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.311083] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.311162] pci 0000:00:12.2: supports D1 D2 [ 0.311163] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.311185] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.311197] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.311259] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.311271] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.311338] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.311355] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.311434] pci 0000:00:13.2: supports D1 D2 [ 0.311436] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.311460] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.311554] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.311570] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.311578] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.311587] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.311596] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.311605] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.311660] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.311680] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.311743] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.311756] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.311828] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.311868] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.311880] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.311945] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.311958] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.311969] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.311980] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.311993] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.312034] pci 0000:01:05.0: [1002:9614] type 00 class 0x030000 [ 0.312040] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.312044] pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff] [ 0.312048] pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff] [ 0.312056] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff] [ 0.312070] pci 0000:01:05.0: supports D1 D2 [ 0.312111] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.312114] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.312116] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.312119] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.312152] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000 [ 0.312168] pci 0000:02:00.0: reg 10: [mem 0xfddfc000-0xfddfffff 64bit] [ 0.312176] pci 0000:02:00.0: reg 18: [io 0xde00-0xdeff] [ 0.312205] pci 0000:02:00.0: reg 30: [mem 0xfddc0000-0xfdddffff pref] [ 0.312249] pci 0000:02:00.0: supports D1 D2 [ 0.312250] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.320769] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.320774] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.320776] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.320779] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.320843] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.320846] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.320850] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.320854] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.320856] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.320857] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.320858] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.320860] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.320861] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) [ 0.320873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.321028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.321081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.321103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.321125] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.321127] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.331091] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331121] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331176] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331202] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331229] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331256] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331282] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.331362] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.331363] vgaarb: loaded [ 0.331364] vgaarb: bridge control possible 0000:01:05.0 [ 0.331487] SCSI subsystem initialized [ 0.331488] ACPI: bus type scsi registered [ 0.331542] libata version 3.00 loaded. [ 0.331555] ACPI: bus type usb registered [ 0.331567] usbcore: registered new interface driver usbfs [ 0.331575] usbcore: registered new interface driver hub [ 0.331594] usbcore: registered new device driver usb [ 0.331648] PCI: Using ACPI for IRQ routing [ 0.339858] PCI: pci_cache_line_size set to 64 bytes [ 0.339864] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:02 [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.339913] e820: reserve RAM buffer [mem 0x00097000-0x0009ffff] [ 0.339914] e820: reserve RAM buffer [mem 0xcff81000-0xcfffffff] [ 0.339979] NetLabel: Initializing [ 0.339980] NetLabel: domain hash size = 128 [ 0.339980] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.339989] NetLabel: unlabeled traffic allowed by default [ 0.340046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.340049] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.342072] Switching to clocksource hpet [ 0.346067] AppArmor: AppArmor Filesystem Enabled [ 0.346102] pnp: PnP ACPI init [ 0.346112] ACPI: bus type pnp registered [ 0.346165] pnp 00:00: [bus 00-ff] [ 0.346167] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.346169] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.346171] pnp 00:00: [io 0x0d00-0xffff window] [ 0.346172] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.346173] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.346175] pnp 00:00: [mem 0xd0000000-0xffffffff window] [ 0.346209] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.346751] pnp 00:01: [io 0x4100-0x411f] [ 0.346753] pnp 00:01: [io 0x0228-0x022f] [ 0.346754] pnp 00:01: [io 0x040b] [ 0.346755] pnp 00:01: [io 0x04d6] [ 0.346757] pnp 00:01: [io 0x0c00-0x0c01] [ 0.346758] pnp 00:01: [io 0x0c14] [ 0.346759] pnp 00:01: [io 0x0c50-0x0c52] [ 0.346760] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.346761] pnp 00:01: [io 0x0c6f] [ 0.346763] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.346764] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.346765] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.346766] pnp 00:01: [io 0x4000-0x40fe] [ 0.346767] pnp 00:01: [io 0x4210-0x4217] [ 0.346769] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.346770] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.346772] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.346776] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.346812] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.346814] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.346816] system 00:01: [io 0x040b] has been reserved [ 0.346817] system 00:01: [io 0x04d6] has been reserved [ 0.346819] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.346820] system 00:01: [io 0x0c14] has been reserved [ 0.346822] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.346823] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.346825] system 00:01: [io 0x0c6f] has been reserved [ 0.346826] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.346828] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.346830] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.346831] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.346833] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.346834] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.346836] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.346839] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.346912] pnp 00:02: [dma 4] [ 0.346913] pnp 00:02: [io 0x0000-0x000f] [ 0.346915] pnp 00:02: [io 0x0080-0x0090] [ 0.346916] pnp 00:02: [io 0x0094-0x009f] [ 0.346917] pnp 00:02: [io 0x00c0-0x00df] [ 0.346935] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.346974] pnp 00:03: [irq 0 disabled] [ 0.346985] pnp 00:03: [irq 8] [ 0.346987] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.347003] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.347020] pnp 00:04: [io 0x0070-0x0073] [ 0.347038] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.347043] pnp 00:05: [io 0x0061] [ 0.347060] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.347066] pnp 00:06: [io 0x00f0-0x00ff] [ 0.347076] pnp 00:06: [irq 13] [ 0.347092] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.347114] pnp 00:07: [io 0x0010-0x001f] [ 0.347115] pnp 00:07: [io 0x0022-0x003f] [ 0.347118] pnp 00:07: [io 0x0044-0x005f] [ 0.347120] pnp 00:07: [io 0x0062-0x0063] [ 0.347121] pnp 00:07: [io 0x0065-0x006f] [ 0.347122] pnp 00:07: [io 0x0074-0x007f] [ 0.347123] pnp 00:07: [io 0x0091-0x0093] [ 0.347124] pnp 00:07: [io 0x00a2-0x00bf] [ 0.347126] pnp 00:07: [io 0x00e0-0x00ef] [ 0.347127] pnp 00:07: [io 0x04d0-0x04d1] [ 0.347128] pnp 00:07: [io 0x0290-0x0297] [ 0.347159] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.347161] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.347163] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.347270] pnp 00:08: [io 0x03f0-0x03f5] [ 0.347271] pnp 00:08: [io 0x03f7] [ 0.347278] pnp 00:08: [irq 6] [ 0.347280] pnp 00:08: [dma 2] [ 0.347307] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.347450] pnp 00:09: [io 0x03f8-0x03ff] [ 0.347457] pnp 00:09: [irq 4] [ 0.347493] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.347706] pnp 00:0a: [io 0x02f8-0x02ff] [ 0.347713] pnp 00:0a: [irq 3] [ 0.347746] pnp 00:0a: Plug and Play ACPI device, IDs PNP0510 (active) [ 0.347766] pnp 00:0b: [io 0x0060] [ 0.347768] pnp 00:0b: [io 0x0064] [ 0.347778] pnp 00:0b: [irq 1] [ 0.347806] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.347862] pnp 00:0c: [mem 0x000f0000-0x000fffff] [ 0.347864] pnp 00:0c: [mem 0xfed00000-0xfed000ff] [ 0.347867] pnp 00:0c: [mem 0xcffe0000-0xcfffffff] [ 0.347868] pnp 00:0c: [mem 0xffff0000-0xffffffff] [ 0.347869] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.347871] pnp 00:0c: [mem 0x00100000-0xcffdffff] [ 0.347872] pnp 00:0c: [mem 0xd0000000-0xdfffffff] [ 0.347873] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.347874] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.347876] pnp 00:0c: [mem 0xfff80000-0xfffeffff] [ 0.347879] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.347881] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.347883] pnp 00:0c: disabling [mem 0x00100000-0xcffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.347916] system 00:0c: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.347918] system 00:0c: [mem 0xcffe0000-0xcfffffff] could not be reserved [ 0.347920] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.347922] system 00:0c: [mem 0xd0000000-0xdfffffff] has been reserved [ 0.347923] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.347925] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.347927] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.347929] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.347938] pnp: PnP ACPI: found 13 devices [ 0.347938] ACPI: ACPI bus type pnp unregistered [ 0.354148] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.354151] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.354154] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.354156] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.354159] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.354161] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.354163] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.354165] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.354168] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.354170] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.354175] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.354178] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.354203] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.354204] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.354206] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354207] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.354209] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff] [ 0.354210] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.354212] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.354213] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.354215] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.354216] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.354218] pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.354220] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.354221] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.354223] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.354224] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.354226] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.354227] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354228] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.354230] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xffffffff] [ 0.354258] NET: Registered protocol family 2 [ 0.354774] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.357317] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.357650] TCP: Hash tables configured (established 524288 bind 65536) [ 0.357698] TCP: reno registered [ 0.357707] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.357735] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.357811] NET: Registered protocol family 1 [ 0.357821] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.358048] pci 0000:01:05.0: Boot video device [ 0.358052] PCI: CLS 32 bytes, default 64 [ 0.358109] Trying to unpack rootfs image as initramfs... [ 0.677726] Freeing initrd memory: 21904k freed [ 0.684460] PCI-DMA: Disabling AGP. [ 0.684545] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.684546] PCI-DMA: using GART IOMMU. [ 0.684548] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.687948] LVT offset 1 assigned for vector 0x400 [ 0.687956] IBS: LVT offset 1 assigned [ 0.687979] perf: AMD IBS detected (0x0000001f) [ 0.688190] audit: initializing netlink socket (disabled) [ 0.688206] type=2000 audit(1349265739.568:1): initialized [ 0.709482] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.710868] VFS: Disk quotas dquot_6.5.2 [ 0.710901] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.711305] fuse init (API version 7.20) [ 0.711371] msgmni has been set to 7398 [ 0.711786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.711818] io scheduler noop registered [ 0.711820] io scheduler deadline registered (default) [ 0.711840] io scheduler cfq registered [ 0.711956] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.712013] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.712027] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.712111] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.712114] ACPI: Power Button [PWRB] [ 0.712145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.712147] ACPI: Power Button [PWRF] [ 0.712179] ACPI: Fan [FAN] (on) [ 0.762735] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20120711/nspredef-463) [ 0.762740] ACPI: [Package] has zero elements (ffff880116e2b600) [ 0.762743] ACPI: Invalid passive threshold [ 0.762960] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.762962] ACPI: Thermal Zone [THRM] (56 C) [ 0.762984] GHES: HEST is not enabled! [ 0.763071] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.783531] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.804010] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.804924] Linux agpgart interface v0.103 [ 0.805909] brd: module loaded [ 0.806466] loop: module loaded [ 0.806538] ahci 0000:00:11.0: version 3.0 [ 0.806678] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.806681] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc [ 0.807248] scsi0 : ahci [ 0.807317] scsi1 : ahci [ 0.807363] scsi2 : ahci [ 0.807402] scsi3 : ahci [ 0.807444] scsi4 : ahci [ 0.807483] scsi5 : ahci [ 0.807509] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.807511] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.807514] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.807516] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.807518] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 0.807520] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 0.808483] scsi6 : pata_acpi [ 0.808687] scsi7 : pata_acpi [ 0.808859] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 0.808860] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 0.809049] libphy: Fixed MDIO Bus: probed [ 0.809082] tun: Universal TUN/TAP device driver, 1.6 [ 0.809083] tun: (C) 1999-2004 Max Krasnyansky [ 0.809127] PPP generic driver version 2.4.2 [ 0.809169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.809200] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.809207] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.809216] QUIRK: Enable AMD PLL fix [ 0.809217] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.809219] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 0.809246] ehci_hcd 0000:00:12.2: debug port 1 [ 0.809266] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.817771] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.817789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.817791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.817793] usb usb1: Product: EHCI Host Controller [ 0.817794] usb usb1: Manufacturer: Linux 3.6.0-999-generic ehci_hcd [ 0.817796] usb usb1: SerialNumber: 0000:00:12.2 [ 0.817894] hub 1-0:1.0: USB hub found [ 0.817897] hub 1-0:1.0: 6 ports detected [ 0.818020] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.818024] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.818027] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.818029] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 0.818055] ehci_hcd 0000:00:13.2: debug port 1 [ 0.818077] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.829774] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.829793] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.829795] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.829796] usb usb2: Product: EHCI Host Controller [ 0.829797] usb usb2: Manufacturer: Linux 3.6.0-999-generic ehci_hcd [ 0.829799] usb usb2: SerialNumber: 0000:00:13.2 [ 0.829885] hub 2-0:1.0: USB hub found [ 0.829888] hub 2-0:1.0: 6 ports detected [ 0.829989] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.830024] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.830028] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.830056] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 0.889711] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.889714] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.889715] usb usb3: Product: OHCI Host Controller [ 0.889716] usb usb3: Manufacturer: Linux 3.6.0-999-generic ohci_hcd [ 0.889718] usb usb3: SerialNumber: 0000:00:12.0 [ 0.889806] hub 3-0:1.0: USB hub found [ 0.889812] hub 3-0:1.0: 3 ports detected [ 0.889905] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.889910] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.889923] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 0.949672] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.949674] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.949676] usb usb4: Product: OHCI Host Controller [ 0.949677] usb usb4: Manufacturer: Linux 3.6.0-999-generic ohci_hcd [ 0.949678] usb usb4: SerialNumber: 0000:00:12.1 [ 0.949766] hub 4-0:1.0: USB hub found [ 0.949771] hub 4-0:1.0: 3 ports detected [ 0.949856] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.949861] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.949887] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 0.982138] ata7.01: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33 [ 0.998042] ata7.01: configured for UDMA/33 [ 1.009628] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.009630] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.009632] usb usb5: Product: OHCI Host Controller [ 1.009633] usb usb5: Manufacturer: Linux 3.6.0-999-generic ohci_hcd [ 1.009634] usb usb5: SerialNumber: 0000:00:13.0 [ 1.009723] hub 5-0:1.0: USB hub found [ 1.009729] hub 5-0:1.0: 3 ports detected [ 1.009813] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.009817] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.009830] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.069617] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.069620] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.069621] usb usb6: Product: OHCI Host Controller [ 1.069622] usb usb6: Manufacturer: Linux 3.6.0-999-generic ohci_hcd [ 1.069624] usb usb6: SerialNumber: 0000:00:13.1 [ 1.069715] hub 6-0:1.0: USB hub found [ 1.069720] hub 6-0:1.0: 3 ports detected [ 1.069808] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.069813] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.069826] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.125589] ata4: SATA link down (SStatus 0 SControl 300) [ 1.125618] ata3: SATA link down (SStatus 0 SControl 300) [ 1.125674] ata6: SATA link down (SStatus 0 SControl 300) [ 1.125703] ata5: SATA link down (SStatus 0 SControl 300) [ 1.129627] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.129628] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.129630] usb usb7: Product: OHCI Host Controller [ 1.129631] usb usb7: Manufacturer: Linux 3.6.0-999-generic ohci_hcd [ 1.129632] usb usb7: SerialNumber: 0000:00:14.5 [ 1.129723] hub 7-0:1.0: USB hub found [ 1.129730] hub 7-0:1.0: 2 ports detected [ 1.129794] uhci_hcd: USB Universal Host Controller Interface driver [ 1.129850] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.129851] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.129978] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.130070] mousedev: PS/2 mouse device common for all mice [ 1.130160] rtc_cmos 00:04: RTC can wake from S4 [ 1.130258] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.130290] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.130341] device-mapper: uevent: version 1.0.3 [ 1.130390] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 1.130395] cpuidle: using governor ladder [ 1.130396] cpuidle: using governor menu [ 1.130397] EFI Variables Facility v0.08 2004-May-17 [ 1.130570] ashmem: initialized [ 1.130658] TCP: cubic registered [ 1.130728] NET: Registered protocol family 10 [ 1.130848] NET: Registered protocol family 17 [ 1.130855] Key type dns_resolver registered [ 1.131070] PM: Hibernation image not present or could not be loaded. [ 1.131077] registered taskstats version 1 [ 1.133024] Key type trusted registered [ 1.134460] Key type encrypted registered [ 1.136014] Magic number: 0:482:25 [ 1.136106] rtc_cmos 00:04: setting system clock to 2012-10-03 12:02:20 UTC (1349265740) [ 1.136134] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead. [ 1.136820] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.136939] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.136940] EDD information not available. [ 1.141568] usb 2-2: new high-speed USB device number 2 using ehci_hcd [ 1.147408] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.297430] ata1: softreset failed (device not ready) [ 1.297435] ata1: applying PMP SRST workaround and retrying [ 1.297451] ata2: softreset failed (device not ready) [ 1.297456] ata2: applying PMP SRST workaround and retrying [ 1.363164] usb 2-2: New USB device found, idVendor=0bda, idProduct=0111 [ 1.363167] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.363168] usb 2-2: Product: USB 2.0 Reader [ 1.363169] usb 2-2: Manufacturer: Generic [ 1.363171] usb 2-2: SerialNumber: 070802034067000737 [ 1.469318] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.469342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.476614] ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 1.476617] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.476759] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.477100] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 1.477102] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.477240] ata2.00: failed to get Identify Device Data, Emask 0x1 [ 1.484723] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.484726] ata1.00: configured for UDMA/133 [ 1.484874] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 1.484987] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.484990] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.485003] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.485020] sd 0:0:0:0: [sda] Write Protect is off [ 1.485023] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.485034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.485218] ata2.00: failed to get Identify Device Data, Emask 0x1 [ 1.485220] ata2.00: configured for UDMA/133 [ 1.485330] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 1.485442] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.485448] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.485450] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.485548] sd 1:0:0:0: [sdb] Write Protect is off [ 1.485550] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.485578] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.486361] scsi 6:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5 [ 1.491454] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.491456] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.491542] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 1.491597] sr 6:0:1:0: Attached scsi generic sg2 type 5 [ 1.531824] sda: sda1 sda2 sda3 [ 1.532169] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.535857] sdb: sdb1 sdb2 sdb3 [ 1.536206] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.646440] Freeing unused kernel memory: 980k freed [ 1.646622] Write protecting the kernel read-only data: 12288k [ 1.650094] Freeing unused kernel memory: 1316k freed [ 1.653020] Freeing unused kernel memory: 1036k freed [ 1.667080] udevd[126]: starting version 175 [ 1.681161] usb 6-3: new low-speed USB device number 2 using ohci_hcd [ 1.681827] sky2: driver version 1.30 [ 1.681897] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5 [ 1.681970] sky2 0000:02:00.0: irq 41 for MSI/MSI-X [ 1.682152] sky2 0000:02:00.0 eth0: addr 00:01:29:a7:a5:b7 [ 1.684417] usbcore: registered new interface driver uas [ 1.684898] Initializing USB Mass Storage driver... [ 1.685166] tsc: Refined TSC clocksource calibration: 3000.105 MHz [ 1.685171] Switching to clocksource tsc [ 1.685960] [drm] Initialized drm 1.1.0 20060810 [ 1.491680] ACPI: Invalid Power Resource to register! [ 1.688184] Floppy drive(s): fd0 is 1.44M [ 1.690803] [drm] radeon defaulting to kernel modesetting. [ 1.690806] [drm] radeon kernel modesetting enabled. [ 1.691072] [drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1002:0x0000). [ 1.691094] [drm] register mmio base: 0xFDFF0000 [ 1.691095] [drm] register mmio size: 65536 [ 1.691399] ATOM BIOS: 113 [ 1.691419] radeon 0000:01:05.0: VRAM: 384M 0x00000000C0000000 - 0x00000000D7FFFFFF (384M used) [ 1.691421] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 1.695843] [drm] Detected VRAM RAM=384M, BAR=256M [ 1.695847] [drm] RAM width 32bits DDR [ 1.695940] scsi8 : usb-storage 2-2:1.0 [ 1.696043] usbcore: registered new interface driver usb-storage [ 1.696045] USB Mass Storage support registered. [ 1.704858] [TTM] Zone kernel: Available graphics memory: 1895560 kiB [ 1.704861] [TTM] Initializing pool allocator [ 1.704864] [TTM] Initializing DMA pool allocator [ 1.704886] [drm] radeon: 384M of VRAM memory ready [ 1.704887] [drm] radeon: 512M of GTT memory ready. [ 1.704898] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.704898] [drm] Driver supports precise vblank timestamp query. [ 1.704911] [drm] radeon: irq initialized. [ 1.704916] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.705609] wmi: Mapper loaded [ 1.705754] [drm] Loading RS780 Microcode [ 1.708657] FDC 0 is a post-1991 82077 [ 1.709989] microcode: CPU0: patch_level=0x01000086 [ 1.720218] microcode: CPU0: new patch_level=0x010000db [ 1.720227] microcode: CPU1: patch_level=0x01000086 [ 1.720233] microcode: CPU1: new patch_level=0x010000db [ 1.720238] microcode: CPU2: patch_level=0x01000086 [ 1.720244] microcode: CPU2: new patch_level=0x010000db [ 1.720248] microcode: CPU3: patch_level=0x01000086 [ 1.720253] microcode: CPU3: new patch_level=0x010000db [ 1.720387] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.723037] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 1.723071] radeon 0000:01:05.0: WB enabled [ 1.723075] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8801154afc00 [ 1.723127] radeon 0000:01:05.0: setting latency timer to 64 [ 1.754078] [drm] ring test on 0 succeeded in 1 usecs [ 1.754150] [drm] ib test on ring 0 succeeded in 0 usecs [ 1.754322] [drm] Radeon Display Connectors [ 1.754323] [drm] Connector 0: [ 1.754324] [drm] VGA-1 [ 1.754325] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 1.754326] [drm] Encoders: [ 1.754327] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.754328] [drm] Connector 1: [ 1.754329] [drm] HDMI-A-1 [ 1.754329] [drm] HPD3 [ 1.754331] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 1.754331] [drm] Encoders: [ 1.754332] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 1.754349] [drm] radeon: power management initialized [ 1.815362] [drm] fb mappable at 0xD0142000 [ 1.815363] [drm] vram apper at 0xD0000000 [ 1.815363] [drm] size 5242880 [ 1.815364] [drm] fb depth is 24 [ 1.815365] [drm] pitch is 5120 [ 1.815427] fbcon: radeondrmfb (fb0) is primary device [ 1.837035] Console: switching to colour frame buffer device 160x64 [ 1.840410] fb0: radeondrmfb frame buffer device [ 1.840411] drm: registered panic notifier [ 1.840416] [drm] Initialized radeon 2.22.0 20080528 for 0000:01:05.0 on minor 0 [ 1.840453] md: bind [ 1.854956] usb 6-3: New USB device found, idVendor=1020, idProduct=030a [ 1.854959] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.854960] usb 6-3: Product: USB HID Device [ 1.854962] usb 6-3: Manufacturer: PATEN [ 1.865992] usbcore: registered new interface driver usbhid [ 1.865993] usbhid: USB HID core driver [ 1.867410] input: PATEN USB HID Device as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input3 [ 1.867493] hid-generic 0003:1020:030A.0001: input,hidraw0: USB HID v1.10 Mouse [PATEN USB HID Device ] on usb-0000:00:13.1-3/input0 [ 1.879187] md: bind [ 1.880528] md: raid1 personality registered for level 1 [ 1.880609] bio: create slab at 1 [ 1.880660] md/raid1:md0: active with 2 out of 2 mirrors [ 1.880676] md0: detected capacity change from 0 to 523960320 [ 1.881940] md0: unknown partition table [ 2.722637] scsi 8:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS [ 2.752849] scsi 8:0:0:1: Direct-Access Generic 2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS [ 2.753262] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 2.753600] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 2.761703] sd 8:0:0:1: [sdd] Attached SCSI removable disk [ 2.762451] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 2.803300] md: linear personality registered for level -1 [ 2.804424] md: multipath personality registered for level -4 [ 2.805559] md: raid0 personality registered for level 0 [ 2.807693] async_tx: api initialized (async) [ 2.872031] raid6: sse2x1 3984 MB/s [ 2.939959] raid6: sse2x2 6888 MB/s [ 3.007898] raid6: sse2x4 7253 MB/s [ 3.007900] raid6: using algorithm sse2x4 (7253 MB/s) [ 3.007901] raid6: using intx1 recovery algorithm [ 3.008284] xor: automatically using best checksumming function: [ 3.047849] generic_sse: 11157.000 MB/sec [ 3.048493] md: raid6 personality registered for level 6 [ 3.048495] md: raid5 personality registered for level 5 [ 3.048496] md: raid4 personality registered for level 4 [ 3.052140] md: raid10 personality registered for level 10 [ 8.118509] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 8.902907] tty_init_dev: 9 callbacks suppressed [ 28.448895] Adding 4194300k swap on /dev/mapper/vg1-swap. Priority:-1 extents:1 across:4194300k [ 28.455337] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,acl [ 28.544500] kjournald starting. Commit interval 5 seconds [ 28.602387] EXT3-fs (md0): using internal journal [ 28.602391] EXT3-fs (md0): mounted filesystem with ordered data mode [ 28.668219] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 29.603333] udevd[917]: starting version 175 [ 29.652358] type=1400 audit(1349265769.040:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=942 comm="apparmor_parser" [ 29.653361] type=1400 audit(1349265769.040:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=996 comm="apparmor_parser" [ 29.791770] init: failsafe main process (1169) killed by TERM signal [ 29.923380] lp: driver loaded but no devices found [ 29.991089] it87: Found IT8716F chip at 0x228, revision 3 [ 29.991136] ACPI Warning: 0x000000000000022d-0x000000000000022e SystemIO conflicts with Region \IP__ 1 (20120711/utaddress-251) [ 29.991141] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 29.995913] it87: Found IT8716F chip at 0x228, revision 3 [ 29.995956] ACPI Warning: 0x000000000000022d-0x000000000000022e SystemIO conflicts with Region \IP__ 1 (20120711/utaddress-251) [ 29.995960] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.027309] Bluetooth: Core ver 2.16 [ 30.027328] NET: Registered protocol family 31 [ 30.027329] Bluetooth: HCI device and connection manager initialized [ 30.027336] Bluetooth: HCI socket layer initialized [ 30.027338] Bluetooth: L2CAP socket layer initialized [ 30.027342] Bluetooth: SCO socket layer initialized [ 30.032900] RPC: Registered named UNIX socket transport module. [ 30.032902] RPC: Registered udp transport module. [ 30.032903] RPC: Registered tcp transport module. [ 30.032904] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 30.039446] Bluetooth: RFCOMM TTY layer initialized [ 30.039453] Bluetooth: RFCOMM socket layer initialized [ 30.039454] Bluetooth: RFCOMM ver 1.11 [ 30.176783] kvm: disabled by bios [ 30.198145] FS-Cache: Loaded [ 30.259324] ppdev: user-space parallel port driver [ 30.264470] NET: Registered protocol family 15 [ 30.279842] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.279844] Bluetooth: BNEP filters: protocol multicast [ 30.279848] Bluetooth: BNEP socket layer initialized [ 30.294567] type=1400 audit(1349265769.684:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1342 comm="apparmor_parser" [ 30.295024] type=1400 audit(1349265769.684:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1342 comm="apparmor_parser" [ 30.449508] FS-Cache: Netfs 'nfs' registered for caching [ 30.511886] sky2 0000:02:00.0 eth0: enabling interface [ 30.511942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.549876] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.555725] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120711/utaddress-251) [ 30.555732] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.628253] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 30.628339] sp5100_tco: mmio address 0xfec000f0 already in use [ 30.642500] MCE: In-kernel MCE decoding enabled. [ 30.664999] EDAC MC: Ver: 3.0.0 [ 30.670400] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 30.749649] AMD64 EDAC driver v3.4.0 [ 30.749682] EDAC amd64: DRAM ECC disabled. [ 30.749690] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 30.749690] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 30.749690] (Note that use of the override may cause unknown side effects.) [ 31.259879] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 31.259948] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 31.260007] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 31.260063] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 31.260119] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 31.260174] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 31.260231] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 31.260287] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 31.551984] type=1400 audit(1349265770.940:6): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=1641 comm="apparmor_parser" [ 31.552022] type=1400 audit(1349265770.940:7): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1644 comm="apparmor_parser" [ 31.552677] type=1400 audit(1349265770.940:8): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1643 comm="apparmor_parser" [ 31.553121] type=1400 audit(1349265770.944:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1643 comm="apparmor_parser" [ 31.553339] type=1400 audit(1349265770.944:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1643 comm="apparmor_parser" [ 31.553747] type=1400 audit(1349265770.944:11): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1646 comm="apparmor_parser" [ 31.647273] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 31.647363] DECnet: Routing cache hash table of 1024 buckets, 16Kbytes [ 31.647369] NET: Registered protocol family 12 [ 31.782068] sctp: Hash tables configured (established 65536 bind 65536) [ 31.813663] DLM installed [ 31.908147] kvm: disabled by bios [ 31.925531] init: alsa-restore main process (1879) terminated with status 99 [ 31.967936] init: lightdm main process (1942) killed by TERM signal