[ 0.000000] random: get_random_bytes called from start_kernel+0x35/0x420 with crng_init=0 [ 0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-020) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubuntu SMP Wed May 30 11:16:09 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dcfa3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dcfa4000-0x00000000dcfd3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dcfd4000-0x00000000dd014fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd015000-0x00000000dd0cefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dd0cf000-0x00000000de3d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de3d4000-0x00000000de3d4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de3d5000-0x00000000de3dcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de3dd000-0x00000000de531fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de532000-0x00000000dec3bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dec3c000-0x00000000dec70fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dec71000-0x00000000deff0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000deff1000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000029effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1B-M, BIOS P1.40 10/27/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x29f000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 write-back [ 0.000000] 3 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000029f000000 aka 10736M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 3584M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 2 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd750-0x000fd75f] mapped at [c00fd750] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x0d3fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] BRK [0x0cee5000, 0x0cee5fff] PGTABLE [ 0.000000] BRK [0x0cee6000, 0x0cee6fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32390000-0x351bffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DD097080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DD09C750 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DD097190 0055B9 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DD0C5E80 000040 [ 0.000000] ACPI: APIC 0x00000000DD09C860 00007E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DD09C8E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DD09C928 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000DD09C968 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: AAFT 0x00000000DD09C9A0 00017D (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DD09CB20 0005E0 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DD09D100 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000) [ 0.000000] ACPI: CRAT 0x00000000DD0A17B8 000200 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DD0A19B8 0006CA (v01 AMD CPMADPS4 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DD0A2088 001120 (v01 AMD CPMCMN 00000001 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 9848MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x0cee7000, 0x0cee7fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000029effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dcfa3fff] [ 0.000000] node 0: [mem 0x00000000dcfd4000-0x00000000dd014fff] [ 0.000000] node 0: [mem 0x00000000de3d4000-0x00000000de3d4fff] [ 0.000000] node 0: [mem 0x00000000de3dd000-0x00000000de531fff] [ 0.000000] node 0: [mem 0x00000000dec3c000-0x00000000dec70fff] [ 0.000000] node 0: [mem 0x00000000deff1000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000029effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000029effffff] [ 0.000000] On node 0 totalpages: 2605340 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 2180 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2378113 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 4, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xdf000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 30 pages/cpu @f5483000 s93324 r0 d29556 u122880 [ 0.000000] pcpu-alloc: s93324 r0 d29556 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2603120 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic root=UUID=a317e00c-8e75-442f-ba9f-1e839f2f7c0c ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0029f000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 10255040K/10421360K available (8547K kernel code, 880K rwdata, 3336K rodata, 1092K init, 852K bss, 166320K reserved, 0K cma-reserved, 9512452K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB) pkmap : 0xff800000 - 0xffa00000 (2048 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xccc8c000 - 0xccd9d000 (1092 kB) .data : 0xcc858f1e - 0xccc79380 (4225 kB) .text : 0xcc000000 - 0xcc858f1e (8547 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 36852 entries in 72 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 2304, nr_irqs: 1000, preallocated irqs: 16 [ 0.000000] CPU 0 irqstacks, hard=edcc8000 soft=edcca000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 10485760 bytes of page_ext [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1449.976 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2899.95 BogoMIPS (lpj=5799904) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.019476] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.019532] Security Framework initialized [ 0.019536] Yama: becoming mindful. [ 0.019579] AppArmor: AppArmor initialized [ 0.019662] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.019669] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.020098] CPU: Physical Processor ID: 0 [ 0.020100] CPU: Processor Core ID: 0 [ 0.020104] FEATURE SPEC_CTRL Not Present [ 0.020106] FEATURE IBPB Not Present [ 0.020107] Disabling indirect branch predictor support [ 0.020111] mce: CPU supports 6 MCE banks [ 0.020124] LVT offset 1 assigned for vector 0xf9 [ 0.020135] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.020138] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.020143] Spectre V2 mitigation: Mitigation: Full AMD retpoline [ 0.020146] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported [ 0.020148] Spectre V2 mitigation: Filling RSB on context switch [ 0.020151] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.020744] Freeing SMP alternatives memory: 32K [ 0.024169] smpboot: Max logical packages: 2 [ 0.024177] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.024747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068000] smpboot: CPU0: AMD Sempron(tm) 2650 APU with Radeon(tm) R3 (family: 0x16, model: 0x0, stepping: 0x1) [ 0.068000] Performance Events: AMD PMU driver. [ 0.068000] ... version: 0 [ 0.068000] ... bit width: 48 [ 0.068000] ... generic registers: 4 [ 0.068000] ... value mask: 0000ffffffffffff [ 0.068000] ... max period: 00007fffffffffff [ 0.068000] ... fixed-purpose events: 0 [ 0.068000] ... event mask: 000000000000000f [ 0.068000] Hierarchical SRCU implementation. [ 0.068000] smp: Bringing up secondary CPUs ... [ 0.068000] CPU 1 irqstacks, hard=ed372000 soft=ed374000 [ 0.068000] x86: Booting SMP configuration: [ 0.068000] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.004000] ------------[ cut here ]------------ [ 0.004000] WARNING: CPU: 1 PID: 0 at /build/linux-hwe-iZpVAS/linux-hwe-4.13.0/arch/x86/mm/tlb.c:361 initialize_tlbstate_and_flush+0x158/0x160 [ 0.004000] Modules linked in: [ 0.004000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.13.0-45-generic #50~16.04.1-Ubuntu [ 0.004000] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1B-M, BIOS P1.40 10/27/2014 [ 0.004000] task: ed35e300 task.stack: ed356000 [ 0.004000] EIP: initialize_tlbstate_and_flush+0x158/0x160 [ 0.004000] EFLAGS: 00210006 CPU: 1 [ 0.004000] EAX: 0cba1000 EBX: ccbe0d00 ECX: ccbe0e88 EDX: 0cda8000 [ 0.004000] ESI: ed35e300 EDI: ccda8000 EBP: ed357f54 ESP: ed357f40 [ 0.004000] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 0.004000] CR0: 80050033 CR2: 00000000 CR3: 0cba1000 CR4: 000406b0 [ 0.004000] Call Trace: [ 0.004000] cpu_init+0xc9/0x280 [ 0.004000] start_secondary+0x24/0x1c0 [ 0.004000] startup_32_smp+0x16b/0x170 [ 0.004000] ? startup_32_smp+0x16b/0x170 [ 0.004000] Code: d8 cc c7 00 00 00 00 00 c7 40 04 00 00 00 00 89 c8 50 9d 0f 1f 40 00 83 c3 10 39 de 75 cd 83 c4 08 5b 5e 5f 5d c3 90 8d 74 26 00 <0f> ff e9 dd fe ff ff 90 0f 1f 44 00 00 55 89 e5 57 56 53 83 ec [ 0.004000] ---[ end trace 0a61d502b59696f8 ]--- [ 0.068087] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.068150] smp: Brought up 1 node, 2 CPUs [ 0.068150] smpboot: Total of 2 processors activated (5799.90 BogoMIPS) [ 0.069007] devtmpfs: initialized [ 0.069007] evm: security.selinux [ 0.069007] evm: security.SMACK64 [ 0.069007] evm: security.SMACK64EXEC [ 0.069007] evm: security.SMACK64TRANSMUTE [ 0.069007] evm: security.SMACK64MMAP [ 0.069007] evm: security.ima [ 0.069007] evm: security.capability [ 0.069007] PM: Registering ACPI NVS region [mem 0xdd015000-0xdd0cefff] (761856 bytes) [ 0.069007] PM: Registering ACPI NVS region [mem 0xde3d5000-0xde3dcfff] (32768 bytes) [ 0.072026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.072026] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.072026] pinctrl core: initialized pinctrl subsystem [ 0.072026] RTC time: 9:27:19, date: 07/18/18 [ 0.072026] NET: Registered protocol family 16 [ 0.072026] EISA bus registered [ 0.072030] cpuidle: using governor ladder [ 0.072030] cpuidle: using governor menu [ 0.072030] PCCT header not found. [ 0.072126] ACPI: bus type PCI registered [ 0.072130] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.072239] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.072245] PCI: not using MMCONFIG [ 0.084628] PCI: Using configuration type 1 for base access [ 0.084630] PCI: Using configuration type 1 for extended access [ 0.088069] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.088183] ACPI: Added _OSI(Module Device) [ 0.088185] ACPI: Added _OSI(Processor Device) [ 0.088187] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.088190] ACPI: Added _OSI(Processor Aggregator Device) [ 0.088465] ACPI: Executed 1 blocks of module-level executable AML code [ 0.100826] ACPI: Interpreter enabled [ 0.100879] ACPI: (supports S0 S3 S4 S5) [ 0.100882] ACPI: Using IOAPIC for interrupt routing [ 0.100947] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.101049] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.101051] PCI: Using MMCONFIG for extended config space [ 0.101061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.101650] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.115865] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.116582] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.116595] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.117050] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.117479] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.118136] PCI host bridge to bus 0000:00 [ 0.118142] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.118146] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.118150] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.118154] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.118158] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.118162] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.118166] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window] [ 0.118170] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.118187] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.118399] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.118593] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400 [ 0.118698] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 0.118887] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.118989] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.119199] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.119233] pci 0000:00:10.0: reg 0x10: [mem 0xfe204000-0xfe205fff 64bit] [ 0.119346] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.119529] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.119555] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.119567] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.119578] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.119589] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.119600] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.119612] pci 0000:00:11.0: reg 0x24: [mem 0xfe20a000-0xfe20a3ff] [ 0.119668] pci 0000:00:11.0: PME# supported from D3hot [ 0.119821] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.119842] pci 0000:00:12.0: reg 0x10: [mem 0xfe209000-0xfe209fff] [ 0.120065] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.120090] pci 0000:00:12.2: reg 0x10: [mem 0xfe208000-0xfe2080ff] [ 0.120175] pci 0000:00:12.2: supports D1 D2 [ 0.120179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.120338] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.120359] pci 0000:00:13.0: reg 0x10: [mem 0xfe207000-0xfe207fff] [ 0.120572] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.120597] pci 0000:00:13.2: reg 0x10: [mem 0xfe206000-0xfe2060ff] [ 0.120681] pci 0000:00:13.2: supports D1 D2 [ 0.120685] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.120845] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.121054] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.121082] pci 0000:00:14.2: reg 0x10: [mem 0xfe200000-0xfe203fff 64bit] [ 0.121154] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.121308] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.121535] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.121698] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.121860] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.122024] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.122190] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.122352] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.122612] pci 0000:01:00.0: [10de:128b] type 00 class 0x030000 [ 0.122646] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.122665] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.122684] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.122698] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.122712] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref] [ 0.122897] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.122926] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff] [ 0.132094] pci 0000:00:02.1: PCI bridge to [bus 01] [ 0.132106] pci 0000:00:02.1: bridge window [io 0xe000-0xefff] [ 0.132113] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.132122] pci 0000:00:02.1: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.132299] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.132338] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.132370] pci 0000:02:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit] [ 0.132391] pci 0000:02:00.0: reg 0x20: [mem 0xfa100000-0xfa103fff 64bit pref] [ 0.132514] pci 0000:02:00.0: supports D1 D2 [ 0.132518] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144115] pci 0000:00:02.3: PCI bridge to [bus 02] [ 0.144127] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff] [ 0.144133] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.144142] pci 0000:00:02.3: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.144172] pci_bus 0000:00: on NUMA node 0 [ 0.145169] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15) [ 0.145331] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15) [ 0.145494] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15) [ 0.145654] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15) [ 0.145789] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.145902] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.146014] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.146124] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.147168] SCSI subsystem initialized [ 0.147247] libata version 3.00 loaded. [ 0.147247] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.147247] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.147247] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.147247] vgaarb: loaded [ 0.147247] ACPI: bus type USB registered [ 0.147247] usbcore: registered new interface driver usbfs [ 0.147247] usbcore: registered new interface driver hub [ 0.147247] usbcore: registered new device driver usb [ 0.147247] EDAC MC: Ver: 3.0.0 [ 0.148068] PCI: Using ACPI for IRQ routing [ 0.156221] PCI: pci_cache_line_size set to 64 bytes [ 0.156293] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.156297] e820: reserve RAM buffer [mem 0xdcfa4000-0xdfffffff] [ 0.156301] e820: reserve RAM buffer [mem 0xdd015000-0xdfffffff] [ 0.156305] e820: reserve RAM buffer [mem 0xde3d5000-0xdfffffff] [ 0.156308] e820: reserve RAM buffer [mem 0xde532000-0xdfffffff] [ 0.156311] e820: reserve RAM buffer [mem 0xdec71000-0xdfffffff] [ 0.156313] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.156316] e820: reserve RAM buffer [mem 0x29f000000-0x29fffffff] [ 0.156519] NetLabel: Initializing [ 0.156521] NetLabel: domain hash size = 128 [ 0.156522] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.156554] NetLabel: unlabeled traffic allowed by default [ 0.156595] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.156595] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.158262] clocksource: Switched to clocksource hpet [ 0.185185] VFS: Disk quotas dquot_6.6.0 [ 0.185221] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.185455] AppArmor: AppArmor Filesystem Enabled [ 0.185566] pnp: PnP ACPI init [ 0.185859] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.185869] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.186031] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.186268] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.186276] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.186950] pnp 00:03: [dma 3] [ 0.187200] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.187304] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.187369] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.187513] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.187521] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.187634] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.187955] pnp 00:08: [dma 0 disabled] [ 0.188088] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.188694] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.188699] system 00:09: [io 0x040b] has been reserved [ 0.188703] system 00:09: [io 0x04d6] has been reserved [ 0.188708] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.188712] system 00:09: [io 0x0c14] has been reserved [ 0.188717] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.188721] system 00:09: [io 0x0c52] has been reserved [ 0.188725] system 00:09: [io 0x0c6c] has been reserved [ 0.188729] system 00:09: [io 0x0c6f] has been reserved [ 0.188733] system 00:09: [io 0x0cd0-0x0cd1] has been reserved [ 0.188737] system 00:09: [io 0x0cd2-0x0cd3] has been reserved [ 0.188742] system 00:09: [io 0x0cd4-0x0cd5] has been reserved [ 0.188746] system 00:09: [io 0x0cd6-0x0cd7] has been reserved [ 0.188750] system 00:09: [io 0x0cd8-0x0cdf] has been reserved [ 0.188754] system 00:09: [io 0x0800-0x089f] has been reserved [ 0.188759] system 00:09: [io 0x0b20-0x0b3f] has been reserved [ 0.188763] system 00:09: [io 0x0900-0x090f] has been reserved [ 0.188768] system 00:09: [io 0x0910-0x091f] has been reserved [ 0.188773] system 00:09: [io 0xfe00-0xfefe] has been reserved [ 0.188779] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.188784] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.188789] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.188793] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.188805] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.188810] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.188815] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved [ 0.188822] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.189339] pnp: PnP ACPI: found 10 devices [ 0.189344] PnPBIOS: Disabled by ACPI PNP [ 0.229091] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.229130] pci 0000:00:02.1: PCI bridge to [bus 01] [ 0.229137] pci 0000:00:02.1: bridge window [io 0xe000-0xefff] [ 0.229144] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.229150] pci 0000:00:02.1: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.229159] pci 0000:00:02.3: PCI bridge to [bus 02] [ 0.229163] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff] [ 0.229170] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.229176] pci 0000:00:02.3: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.229187] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.229192] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.229196] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.229200] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.229205] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.229209] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.229213] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xffffffff window] [ 0.229217] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.229221] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff] [ 0.229226] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.229230] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.229234] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.229238] pci_bus 0000:02: resource 2 [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.229368] NET: Registered protocol family 2 [ 0.229678] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.229708] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.229741] TCP: Hash tables configured (established 8192 bind 8192) [ 0.229797] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.229807] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.229879] NET: Registered protocol family 1 [ 0.340458] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 0.448453] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 0.448526] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.448547] PCI: CLS 64 bytes, default 64 [ 0.448660] Unpacking initramfs... [ 2.168272] Freeing initrd memory: 47296K [ 2.168448] amd_uncore: AMD NB counters detected [ 2.168454] amd_uncore: AMD LLC counters detected [ 2.168557] LVT offset 0 assigned for vector 0x400 [ 2.168600] perf: AMD IBS detected (0x000000ff) [ 2.168728] Scanning for low memory corruption every 60 seconds [ 2.169496] audit: initializing netlink subsys (disabled) [ 2.169582] audit: type=2000 audit(1531906041.169:1): state=initialized audit_enabled=0 res=1 [ 2.170218] Initialise system trusted keyrings [ 2.170239] Key type blacklist registered [ 2.170314] workingset: timestamp_bits=14 max_order=22 bucket_order=8 [ 2.173417] zbud: loaded [ 2.174084] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.174499] fuse init (API version 7.26) [ 2.177983] Key type asymmetric registered [ 2.177986] Asymmetric key parser 'x509' registered [ 2.178011] bounce: pool size: 64 pages [ 2.178035] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.178109] io scheduler noop registered [ 2.178111] io scheduler deadline registered [ 2.178226] io scheduler cfq registered (default) [ 2.179085] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 2.179087] vesafb: scrolling: redraw [ 2.179091] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.179127] vesafb: framebuffer at 0xf9000000, mapped to 0xf8200000, using 1216k, total 1216k [ 2.179323] Console: switching to colour frame buffer device 80x30 [ 2.179350] fb0: VESA VGA frame buffer device [ 2.179555] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.179579] ACPI: Power Button [PWRB] [ 2.179675] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.179729] ACPI: Power Button [PWRF] [ 2.180246] GHES: HEST is not enabled! [ 2.180303] isapnp: Scanning for PnP cards... [ 2.180477] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.201051] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.204250] Linux agpgart interface v0.103 [ 2.232056] loop: module loaded [ 2.232503] libphy: Fixed MDIO Bus: probed [ 2.232505] tun: Universal TUN/TAP device driver, 1.6 [ 2.232583] PPP generic driver version 2.4.2 [ 2.232673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.232680] ehci-pci: EHCI PCI platform driver [ 2.232965] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.232980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.232988] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.233001] ehci-pci 0000:00:12.2: debug port 1 [ 2.233062] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe208000 [ 2.248062] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.248177] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.248182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.248186] usb usb1: Product: EHCI Host Controller [ 2.248189] usb usb1: Manufacturer: Linux 4.13.0-45-generic ehci_hcd [ 2.248193] usb usb1: SerialNumber: 0000:00:12.2 [ 2.248419] hub 1-0:1.0: USB hub found [ 2.248437] hub 1-0:1.0: 4 ports detected [ 2.248825] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.248840] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.248846] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.248857] ehci-pci 0000:00:13.2: debug port 1 [ 2.248894] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe206000 [ 2.264060] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.264160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.264165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.264169] usb usb2: Product: EHCI Host Controller [ 2.264172] usb usb2: Manufacturer: Linux 4.13.0-45-generic ehci_hcd [ 2.264176] usb usb2: SerialNumber: 0000:00:13.2 [ 2.264376] hub 2-0:1.0: USB hub found [ 2.264392] hub 2-0:1.0: 4 ports detected [ 2.264647] ehci-platform: EHCI generic platform driver [ 2.264672] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.264680] ohci-pci: OHCI PCI platform driver [ 2.264834] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.264845] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.264884] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe209000 [ 2.328118] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.328122] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.328126] usb usb3: Product: OHCI PCI host controller [ 2.328129] usb usb3: Manufacturer: Linux 4.13.0-45-generic ohci_hcd [ 2.328132] usb usb3: SerialNumber: 0000:00:12.0 [ 2.328343] hub 3-0:1.0: USB hub found [ 2.328362] hub 3-0:1.0: 4 ports detected [ 2.328735] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.328747] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 2.328784] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe207000 [ 2.392113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.392117] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.392121] usb usb4: Product: OHCI PCI host controller [ 2.392124] usb usb4: Manufacturer: Linux 4.13.0-45-generic ohci_hcd [ 2.392127] usb usb4: SerialNumber: 0000:00:13.0 [ 2.392343] hub 4-0:1.0: USB hub found [ 2.392361] hub 4-0:1.0: 4 ports detected [ 2.392623] ohci-platform: OHCI generic platform driver [ 2.392642] uhci_hcd: USB Universal Host Controller Interface driver [ 2.392820] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.392832] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 2.393043] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 [ 2.393280] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.393285] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.393289] usb usb5: Product: xHCI Host Controller [ 2.393292] usb usb5: Manufacturer: Linux 4.13.0-45-generic xhci-hcd [ 2.393295] usb usb5: SerialNumber: 0000:00:10.0 [ 2.393510] hub 5-0:1.0: USB hub found [ 2.393528] hub 5-0:1.0: 2 ports detected [ 2.393711] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.393719] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 2.396439] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.396495] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.396500] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.396504] usb usb6: Product: xHCI Host Controller [ 2.396507] usb usb6: Manufacturer: Linux 4.13.0-45-generic xhci-hcd [ 2.396510] usb usb6: SerialNumber: 0000:00:10.0 [ 2.396704] hub 6-0:1.0: USB hub found [ 2.396723] hub 6-0:1.0: 2 ports detected [ 2.396999] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.397001] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.397585] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.397787] mousedev: PS/2 mouse device common for all mice [ 2.398040] rtc_cmos 00:05: RTC can wake from S4 [ 2.398190] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.398220] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.398234] i2c /dev entries driver [ 2.398342] device-mapper: uevent: version 1.0.3 [ 2.398491] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.398535] platform eisa.0: Probing EISA bus 0 [ 2.398540] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.398544] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.398547] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.398551] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.398554] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.398558] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.398561] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.398564] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.398568] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.398571] platform eisa.0: EISA: Detected 0 cards [ 2.398580] cpufreq_nforce2: No nForce2 chipset [ 2.403461] ledtrig-cpu: registered to indicate activity on CPUs [ 2.403987] NET: Registered protocol family 10 [ 2.413481] Segment Routing with IPv6 [ 2.413532] NET: Registered protocol family 17 [ 2.413555] Key type dns_resolver registered [ 2.420616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.447249] microcode: microcode updated early to new patch_level=0x0700010f [ 2.447318] microcode: CPU0: patch_level=0x0700010f [ 2.447327] microcode: CPU1: patch_level=0x0700010f [ 2.447403] microcode: Microcode Update Driver: v2.2. [ 2.447414] Using IPI No-Shortcut mode [ 2.447429] sched_clock: Marking stable (2444005528, 0)->(2549793368, -105787840) [ 2.447778] registered taskstats version 1 [ 2.447798] Loading compiled-in X.509 certificates [ 2.458244] Loaded X.509 cert 'Build time autogenerated kernel key: 555023a2440fcddf0ddf50a50c710c18a85442b5' [ 2.458290] zswap: loaded using pool lzo/zbud [ 2.466742] Key type big_key registered [ 2.466751] Key type trusted registered [ 2.470835] Key type encrypted registered [ 2.470843] AppArmor: AppArmor sha1 policy hashing enabled [ 2.470849] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.470892] evm: HMAC attrs: 0x1 [ 2.471324] Magic number: 10:238:475 [ 2.471531] rtc_cmos 00:05: setting system clock to 2018-07-18 09:27:22 UTC (1531906042) [ 2.471823] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.471979] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.471980] EDD information not available. [ 2.472140] PM: Hibernation image not present or could not be loaded. [ 2.490544] isapnp: No Plug & Play device found [ 2.494183] Freeing unused kernel memory: 1092K [ 2.508451] Write protecting the kernel text: 8548k [ 2.508626] Write protecting the kernel read-only data: 3344k [ 2.508627] NX-protecting the kernel data: 5788k [ 2.509001] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.757476] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 2.877430] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.878318] ahci 0000:00:11.0: version 3.0 [ 2.878635] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.878643] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.891310] scsi host0: ahci [ 2.894997] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf801d000, d0:50:99:61:ec:4f, XID 0c000800 IRQ 31 [ 2.895002] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.903621] scsi host1: ahci [ 2.903767] ata1: SATA max UDMA/133 abar m1024@0xfe20a000 port 0xfe20a100 irq 30 [ 2.903772] ata2: SATA max UDMA/133 abar m1024@0xfe20a000 port 0xfe20a180 irq 30 [ 2.951899] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.959109] usb 4-1: New USB device found, idVendor=093a, idProduct=2510 [ 2.959114] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.959118] usb 4-1: Product: USB Optical Mouse [ 2.959121] usb 4-1: Manufacturer: PixArt [ 2.980650] hidraw: raw HID events driver (C) Jiri Kosina [ 2.997008] usbcore: registered new interface driver usbhid [ 2.997011] usbhid: USB HID core driver [ 3.005391] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:093A:2510.0001/input/input3 [ 3.006190] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-1/input0 [ 3.065108] checking generic (f9000000 130000) vs hw (f0000000 8000000) [ 3.065113] checking generic (f9000000 130000) vs hw (f8000000 2000000) [ 3.065115] fb: switching to nouveaufb from VESA VGA [ 3.065170] Console: switching to colour dummy device 80x25 [ 3.065464] nouveau 0000:01:00.0: NVIDIA GK208B (b060b0b1) [ 3.065471] pmd_set_huge: Cannot satisfy [mem 0xfd000000-0xfd200000] with a huge-page mapping due to MTRR override. [ 3.176753] nouveau 0000:01:00.0: bios: version 80.28.b8.00.45 [ 3.181377] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5 [ 3.200071] tsc: Refined TSC clocksource calibration: 1449.999 MHz [ 3.200083] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14e6a07e4b8, max_idle_ns: 440795219093 ns [ 3.380086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.380128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.382128] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133 [ 3.382133] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.382718] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33 [ 3.382723] ata2.00: applying bridge limits [ 3.383242] ata1.00: configured for UDMA/133 [ 3.383531] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 A7BA PQ: 0 ANSI: 5 [ 3.385857] ata2.00: configured for UDMA/33 [ 3.428428] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.428814] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.428849] sd 0:0:0:0: [sda] Write Protect is off [ 3.428854] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.428911] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.429473] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5 [ 3.456759] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.456763] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.457012] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.457139] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.477204] sda: sda1 sda2 sda3 < sda5 sda6 > [ 3.478182] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.236549] clocksource: Switched to clocksource tsc [ 4.480427] [TTM] Zone kernel: Available graphics memory: 395504 kiB [ 4.480431] [TTM] Zone highmem: Available graphics memory: 5151730 kiB [ 4.480433] [TTM] Initializing pool allocator [ 4.480447] [TTM] Initializing DMA pool allocator [ 4.480486] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 4.480490] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 4.480498] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 4.480502] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 4.480509] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 4.480513] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 00020010 [ 4.480517] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f10 00000000 [ 4.480521] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031 [ 4.480525] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 4.480528] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 4.504753] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.504755] [drm] Driver supports precise vblank timestamp query. [ 4.656064] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 4.938861] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo f4f25c00 [ 4.948502] fbcon: nouveaufb (fb0) is primary device [ 4.949192] Console: switching to colour frame buffer device 128x48 [ 4.949241] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 4.984104] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 12.697661] random: crng init done [ 13.113024] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 14.388548] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 14.408454] systemd[1]: Detected architecture x86. [ 14.422107] systemd[1]: Set hostname to . [ 16.127773] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 16.128052] systemd[1]: Listening on Journal Socket. [ 16.128246] systemd[1]: Listening on Journal Audit Socket. [ 16.128288] systemd[1]: Reached target User and Group Name Lookups. [ 16.128390] systemd[1]: Listening on udev Control Socket. [ 16.128654] systemd[1]: Created slice System Slice. [ 16.129821] systemd[1]: Mounting Huge Pages File System... [ 17.219496] lp: driver loaded but no devices found [ 17.290214] ppdev: user-space parallel port driver [ 17.365568] parport_pc 00:03: reported by Plug and Play ACPI [ 17.365662] parport0: PC-style at 0x378, irq 5 [PCSPP,EPP] [ 17.464245] lp0: using parport0 (interrupt-driven). [ 18.184273] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 18.624274] systemd-journald[280]: Received request to flush runtime journal from PID 1 [ 19.741496] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 19.741502] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 19.742037] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 20.039815] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.653579] kvm: Nested Virtualization enabled [ 21.653585] kvm: Nested Paging enabled [ 21.995359] MCE: In-kernel MCE decoding enabled. [ 22.205441] EDAC amd64: Node 0: DRAM ECC disabled. [ 22.205446] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 22.286791] snd_hda_intel 0000:01:00.1: Disabling MSI [ 22.286808] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 22.556468] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 22.556478] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.556483] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 22.556486] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 22.556488] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 22.556493] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 22.556497] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 22.556500] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 22.571662] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 22.571809] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 22.571961] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 22.680145] audit: type=1400 audit(1531906062.708:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=584 comm="apparmor_parser" [ 22.680154] audit: type=1400 audit(1531906062.708:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser" [ 22.680160] audit: type=1400 audit(1531906062.708:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=584 comm="apparmor_parser" [ 22.680166] audit: type=1400 audit(1531906062.708:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser" [ 22.724393] audit: type=1400 audit(1531906062.752:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=583 comm="apparmor_parser" [ 22.724404] audit: type=1400 audit(1531906062.752:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=583 comm="apparmor_parser" [ 23.108171] audit: type=1400 audit(1531906063.136:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=650 comm="apparmor_parser" [ 23.108180] audit: type=1400 audit(1531906063.136:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=650 comm="apparmor_parser" [ 23.432421] audit: type=1400 audit(1531906063.460:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=641 comm="apparmor_parser" [ 23.432432] audit: type=1400 audit(1531906063.460:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=641 comm="apparmor_parser" [ 24.237494] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input7 [ 24.237644] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input8 [ 25.678515] Adding 10418684k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:10418684k FS [ 34.068885] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 34.146743] r8169 0000:02:00.0 enp2s0: link down [ 34.146841] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 89.228274] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 89.377305] usb 1-2: New USB device found, idVendor=aaaa, idProduct=8816 [ 89.377316] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 89.377323] usb 1-2: Product: MXT USB Device [ 89.377328] usb 1-2: Manufacturer: MXTronics [ 89.377334] usb 1-2: SerialNumber: 130818v01 [ 89.467599] usb-storage 1-2:1.0: USB Mass Storage device detected [ 89.471528] scsi host2: usb-storage 1-2:1.0 [ 89.471741] usbcore: registered new interface driver usb-storage [ 89.495271] usbcore: registered new interface driver uas [ 90.497882] scsi 2:0:0:0: Direct-Access MXT-USB Storage Device 1308 PQ: 0 ANSI: 0 CCS [ 90.498984] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 90.507374] sd 2:0:0:0: [sdb] 30679040 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 90.508855] sd 2:0:0:0: [sdb] Write Protect is off [ 90.508862] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 90.511522] sd 2:0:0:0: [sdb] No Caching mode page found [ 90.511537] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 90.520112] sdb: sdb1 [ 90.524471] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 91.139451] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 147.388667] r8169 0000:02:00.0 enp2s0: link up [ 147.388695] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 311.045180] ------------[ cut here ]------------ [ 311.045203] WARNING: CPU: 1 PID: 0 at /build/linux-hwe-iZpVAS/linux-hwe-4.13.0/kernel/rcu/tree.c:2821 rcu_process_callbacks+0x47f/0x4a0 [ 311.045206] Modules linked in: nls_iso8859_1 uas usb_storage dm_crypt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic amd_freq_sensitivity snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm edac_mce_amd snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_amd kvm snd_seq snd_seq_device irqbypass crc32_pclmul snd_timer pcbc snd soundcore aesni_intel aes_i586 crypto_simd input_leds cryptd serio_raw fam15h_power k10temp mac_hid shpchp i2c_piix4 parport_pc ppdev lp parport autofs4 nouveau hid_generic usbhid hid mxm_wmi wmi video i2c_algo_bit ttm drm_kms_helper ahci r8169 libahci syscopyarea mii sysfillrect sysimgblt fb_sys_fops drm [ 311.045328] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.13.0-45-generic #50~16.04.1-Ubuntu [ 311.045338] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1B-M, BIOS P1.40 10/27/2014 [ 311.045345] task: ed35e300 task.stack: ed356000 [ 311.045354] EIP: rcu_process_callbacks+0x47f/0x4a0 [ 311.045357] EFLAGS: 00210002 CPU: 1 [ 311.045361] EAX: 00000000 EBX: f54b7940 ECX: 00000002 EDX: 00000001 [ 311.045366] ESI: f54b7960 EDI: ccbc9b40 EBP: ed375fc8 ESP: ed375f98 [ 311.045370] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 311.045374] CR0: 80050033 CR2: 0959c000 CR3: 341b0d60 CR4: 000406f0 [ 311.045378] Call Trace: [ 311.045385] [ 311.045402] __do_softirq+0xde/0x249 [ 311.045414] ? __irqentry_text_end+0x2/0x2 [ 311.045423] call_on_stack+0x45/0x50 [ 311.045428] [ 311.045438] ? irq_exit+0xad/0xb0 [ 311.045446] ? smp_trace_apic_timer_interrupt+0x61/0x90 [ 311.045455] ? smp_apic_timer_interrupt+0xd/0x10 [ 311.045463] ? apic_timer_interrupt+0x39/0x40 [ 311.045473] ? native_safe_halt+0x5/0x10 [ 311.045480] ? acpi_safe_halt+0x20/0x30 [ 311.045488] ? acpi_idle_do_entry+0x35/0x40 [ 311.045499] ? acpi_idle_enter+0xc3/0x230 [ 311.045507] ? acpi_idle_enter_freeze+0x60/0x60 [ 311.045519] ? cpuidle_enter_state+0x11c/0x380 [ 311.045529] ? cpuidle_enter+0x14/0x20 [ 311.045538] ? call_cpuidle+0x21/0x40 [ 311.045545] ? do_idle+0x174/0x1d0 [ 311.045553] ? cpu_startup_entry+0x65/0x70 [ 311.045564] ? start_secondary+0x16e/0x1c0 [ 311.045574] ? startup_32_smp+0x16b/0x170 [ 311.045581] ? startup_32_smp+0x16b/0x170 [ 311.045588] Code: bc cc 0f 8f f6 fe ff ff 8b 15 60 98 bc cc 89 53 64 e9 e8 fe ff ff 8d b6 00 00 00 00 8b 55 dc 89 f0 e8 e6 63 77 00 e9 28 fc ff ff <0f> ff e9 fc fe ff ff 0f ff e9 ba fc ff ff e8 2e 45 f9 ff 8d b4 [ 311.045685] ---[ end trace 0a61d502b59696fa ]--- [ 315.734765] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 315.807442] JFS: nTxBlock = 8192, nTxLock = 65536 [ 315.899808] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 316.055970] QNX4 filesystem 0.2.3 registered. [ 316.189115] raid6: mmxx1 gen() 905 MB/s [ 316.237110] raid6: mmxx2 gen() 982 MB/s [ 316.285087] raid6: sse1x1 gen() 998 MB/s [ 316.333097] raid6: sse1x2 gen() 1046 MB/s [ 316.381109] raid6: sse2x1 gen() 2068 MB/s [ 316.429102] raid6: sse2x1 xor() 1565 MB/s [ 316.477113] raid6: sse2x2 gen() 2521 MB/s [ 316.525075] raid6: sse2x2 xor() 1907 MB/s [ 316.525081] raid6: using algorithm sse2x2 gen() 2521 MB/s [ 316.525082] raid6: .... xor() 1907 MB/s, rmw enabled [ 316.525085] raid6: using ssse3x1 recovery algorithm [ 316.540437] xor: automatically using best checksumming function avx [ 316.692312] Btrfs loaded, crc32c=crc32c-intel [ 334.319648] kauditd_printk_skb: 30 callbacks suppressed [ 334.319651] audit: type=1400 audit(1531906374.138:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=4711 comm="apparmor_parser" [ 334.320245] audit: type=1400 audit(1531906374.139:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4711 comm="apparmor_parser" [ 338.410533] audit: type=1400 audit(1531906378.229:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/cups-browsed" pid=4736 comm="apparmor_parser" [ 342.244401] audit: type=1400 audit(1531906382.063:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4809 comm="apparmor_parser" [ 342.245987] audit: type=1400 audit(1531906382.064:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4809 comm="apparmor_parser" [ 342.267647] audit: type=1400 audit(1531906382.086:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=4809 comm="apparmor_parser" [ 457.108423] usb usb1-port2: disabled by hub (EMI?), re-enabling... [ 457.108449] usb 1-2: USB disconnect, device number 2