[ 0.000000] microcode: microcode updated early to revision 0xea, date = 2021-01-25 [ 0.000000] Linux version 5.13.0-14-generic (buildd@lcy01-amd64-002) (gcc (Ubuntu 10.3.0-6ubuntu1) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #14-Ubuntu SMP Mon Aug 2 12:43:35 UTC 2021 (Ubuntu 5.13.0-14.14-generic 5.13.1) [ 0.000000] Command line: BOOT_IMAGE=/BOOT/ubuntu_aoozig@/vmlinuz-5.13.0-14-generic root=ZFS=rpool/ROOT/ubuntu_aoozig ro video=1920x1080@60 quiet splash drm.edid_firmware=edid/edid.bin mpt3sas.logging_level=1 fsck.mode=force fsck.repair=yes cpuidle.governor=teo swapaccount=1 mitigations=off init_on_alloc=0 loglevel=3 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006b4b1fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006b4b2000-0x000000006b4b2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006b4b3000-0x000000006b4b3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006b4b4000-0x000000008e1ebfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008e1ec000-0x000000008e52efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008e52f000-0x000000008e6a6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000008e6a7000-0x000000008edb0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008edb1000-0x000000008fbfdfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008fbfe000-0x000000008fbfefff] usable [ 0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c6effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x6aca2018-0x6acbb257] usable ==> usable [ 0.000000] e820: update [mem 0x6aca2018-0x6acbb257] usable ==> usable [ 0.000000] e820: update [mem 0x6ac92018-0x6aca1e57] usable ==> usable [ 0.000000] e820: update [mem 0x6ac92018-0x6aca1e57] usable ==> usable [ 0.000000] e820: update [mem 0x6ac78018-0x6ac91857] usable ==> usable [ 0.000000] e820: update [mem 0x6ac78018-0x6ac91857] usable ==> usable [ 0.000000] e820: update [mem 0x6ac67018-0x6ac77257] usable ==> usable [ 0.000000] e820: update [mem 0x6ac67018-0x6ac77257] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006ac67017] usable [ 0.000000] reserve setup_data: [mem 0x000000006ac67018-0x000000006ac77257] usable [ 0.000000] reserve setup_data: [mem 0x000000006ac77258-0x000000006ac78017] usable [ 0.000000] reserve setup_data: [mem 0x000000006ac78018-0x000000006ac91857] usable [ 0.000000] reserve setup_data: [mem 0x000000006ac91858-0x000000006ac92017] usable [ 0.000000] reserve setup_data: [mem 0x000000006ac92018-0x000000006aca1e57] usable [ 0.000000] reserve setup_data: [mem 0x000000006aca1e58-0x000000006aca2017] usable [ 0.000000] reserve setup_data: [mem 0x000000006aca2018-0x000000006acbb257] usable [ 0.000000] reserve setup_data: [mem 0x000000006acbb258-0x000000006b4b1fff] usable [ 0.000000] reserve setup_data: [mem 0x000000006b4b2000-0x000000006b4b2fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000006b4b3000-0x000000006b4b3fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006b4b4000-0x000000008e1ebfff] usable [ 0.000000] reserve setup_data: [mem 0x000000008e1ec000-0x000000008e52efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000008e52f000-0x000000008e6a6fff] usable [ 0.000000] reserve setup_data: [mem 0x000000008e6a7000-0x000000008edb0fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000008edb1000-0x000000008fbfdfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000008fbfe000-0x000000008fbfefff] usable [ 0.000000] reserve setup_data: [mem 0x000000008fbff000-0x000000008fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000c6effffff] usable [ 0.000000] efi: EFI v2.50 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x8e6a7000 ACPI=0x8e6a7000 SMBIOS=0x8facb000 ESRT=0x8c2c3298 MOKvar=0x8c0ae000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: MSI MS-7998/C236A WORKSTATION (MS-7998), BIOS 2.A0 06/15/2018 [ 0.000000] tsc: Detected 3300.000 MHz processor [ 0.000000] tsc: Detected 3299.994 MHz TSC [ 0.000678] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000681] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000687] last_pfn = 0xc6f000 max_arch_pfn = 0x400000000 [ 0.000825] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001675] last_pfn = 0x8fbff max_arch_pfn = 0x400000000 [ 0.008132] found SMP MP-table at [mem 0x000fcd60-0x000fcd6f] [ 0.008141] esrt: Reserving ESRT space from 0x000000008c2c3298 to 0x000000008c2c32d0. [ 0.008146] e820: update [mem 0x8c2c3000-0x8c2c3fff] usable ==> reserved [ 0.008157] e820: update [mem 0x8c0ae000-0x8c0aefff] usable ==> reserved [ 0.008170] Kernel/User page tables isolation: disabled on command line. [ 0.008171] Using GB pages for direct mapping [ 0.008756] secureboot: Secure boot disabled [ 0.008757] RAMDISK: [mem 0x3b884000-0x3fffdfff] [ 0.008761] ACPI: Early table checksum verification disabled [ 0.008764] ACPI: RSDP 0x000000008E6A7000 000024 (v02 ALASKA) [ 0.008767] ACPI: XSDT 0x000000008E6A70A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008772] ACPI: FACP 0x000000008E6CFC38 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.008777] ACPI: DSDT 0x000000008E6A7208 028A2D (v02 ALASKA A M I 01072009 INTL 20160422) [ 0.008780] ACPI: FACS 0x000000008EDB0C40 000040 [ 0.008782] ACPI: APIC 0x000000008E6CFD50 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.008784] ACPI: FPDT 0x000000008E6CFDD8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008787] ACPI: MCFG 0x000000008E6CFE20 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.008789] ACPI: SSDT 0x000000008E6CFE60 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.008792] ACPI: FIDT 0x000000008E6D0220 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008794] ACPI: SSDT 0x000000008E6D02C0 003159 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.008797] ACPI: SSDT 0x000000008E6D3420 00255F (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.008799] ACPI: HPET 0x000000008E6D5980 000038 (v01 INTEL SKL 00000001 MSFT 0000005F) [ 0.008802] ACPI: SSDT 0x000000008E6D59B8 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422) [ 0.008804] ACPI: SSDT 0x000000008E6D67A0 000A29 (v02 INTEL xh_rvp08 00000000 INTL 20160422) [ 0.008807] ACPI: UEFI 0x000000008E6D71D0 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.008809] ACPI: SSDT 0x000000008E6D7218 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.008812] ACPI: LPIT 0x000000008E6D80F8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.008815] ACPI: WSMT 0x000000008E6D8190 000028 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.008817] ACPI: SSDT 0x000000008E6D81B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.008819] ACPI: SSDT 0x000000008E6D8458 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.008822] ACPI: DBGP 0x000000008E6DB460 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.008824] ACPI: DBG2 0x000000008E6DB498 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.008827] ACPI: BGRT 0x000000008E6DB4F0 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008829] ACPI: Reserving FACP table memory at [mem 0x8e6cfc38-0x8e6cfd4b] [ 0.008830] ACPI: Reserving DSDT table memory at [mem 0x8e6a7208-0x8e6cfc34] [ 0.008831] ACPI: Reserving FACS table memory at [mem 0x8edb0c40-0x8edb0c7f] [ 0.008832] ACPI: Reserving APIC table memory at [mem 0x8e6cfd50-0x8e6cfdd3] [ 0.008833] ACPI: Reserving FPDT table memory at [mem 0x8e6cfdd8-0x8e6cfe1b] [ 0.008834] ACPI: Reserving MCFG table memory at [mem 0x8e6cfe20-0x8e6cfe5b] [ 0.008835] ACPI: Reserving SSDT table memory at [mem 0x8e6cfe60-0x8e6d021b] [ 0.008835] ACPI: Reserving FIDT table memory at [mem 0x8e6d0220-0x8e6d02bb] [ 0.008836] ACPI: Reserving SSDT table memory at [mem 0x8e6d02c0-0x8e6d3418] [ 0.008837] ACPI: Reserving SSDT table memory at [mem 0x8e6d3420-0x8e6d597e] [ 0.008838] ACPI: Reserving HPET table memory at [mem 0x8e6d5980-0x8e6d59b7] [ 0.008839] ACPI: Reserving SSDT table memory at [mem 0x8e6d59b8-0x8e6d679c] [ 0.008840] ACPI: Reserving SSDT table memory at [mem 0x8e6d67a0-0x8e6d71c8] [ 0.008840] ACPI: Reserving UEFI table memory at [mem 0x8e6d71d0-0x8e6d7211] [ 0.008841] ACPI: Reserving SSDT table memory at [mem 0x8e6d7218-0x8e6d80f5] [ 0.008842] ACPI: Reserving LPIT table memory at [mem 0x8e6d80f8-0x8e6d818b] [ 0.008843] ACPI: Reserving WSMT table memory at [mem 0x8e6d8190-0x8e6d81b7] [ 0.008844] ACPI: Reserving SSDT table memory at [mem 0x8e6d81b8-0x8e6d8456] [ 0.008845] ACPI: Reserving SSDT table memory at [mem 0x8e6d8458-0x8e6db459] [ 0.008846] ACPI: Reserving DBGP table memory at [mem 0x8e6db460-0x8e6db493] [ 0.008846] ACPI: Reserving DBG2 table memory at [mem 0x8e6db498-0x8e6db4eb] [ 0.008847] ACPI: Reserving BGRT table memory at [mem 0x8e6db4f0-0x8e6db527] [ 0.008854] ACPI: Local APIC address 0xfee00000 [ 0.008936] No NUMA configuration found [ 0.008936] Faking a node at [mem 0x0000000000000000-0x0000000c6effffff] [ 0.008946] NODE_DATA(0) allocated [mem 0xc6efd6000-0xc6effffff] [ 0.009238] Zone ranges: [ 0.009239] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009240] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009242] Normal [mem 0x0000000100000000-0x0000000c6effffff] [ 0.009243] Device empty [ 0.009244] Movable zone start for each node [ 0.009246] Early memory node ranges [ 0.009247] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.009248] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.009249] node 0: [mem 0x0000000000100000-0x000000006b4b1fff] [ 0.009250] node 0: [mem 0x000000006b4b4000-0x000000008e1ebfff] [ 0.009251] node 0: [mem 0x000000008e52f000-0x000000008e6a6fff] [ 0.009252] node 0: [mem 0x000000008fbfe000-0x000000008fbfefff] [ 0.009252] node 0: [mem 0x0000000100000000-0x0000000c6effffff] [ 0.009256] Initmem setup node 0 [mem 0x0000000000001000-0x0000000c6effffff] [ 0.009257] On node 0 totalpages: 12571392 [ 0.009258] DMA zone: 64 pages used for memmap [ 0.009259] DMA zone: 157 pages reserved [ 0.009260] DMA zone: 3997 pages, LIFO batch:0 [ 0.009501] DMA zone: 28771 pages in unavailable ranges [ 0.009502] DMA32 zone: 9038 pages used for memmap [ 0.009503] DMA32 zone: 578403 pages, LIFO batch:63 [ 0.013550] DMA32 zone: 7325 pages in unavailable ranges [ 0.013553] Normal zone: 187328 pages used for memmap [ 0.013553] Normal zone: 11988992 pages, LIFO batch:63 [ 0.095574] Normal zone: 4096 pages in unavailable ranges [ 0.095808] ACPI: PM-Timer IO Port: 0x1808 [ 0.095810] ACPI: Local APIC address 0xfee00000 [ 0.095816] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.095817] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.095818] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.095819] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.095845] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.095847] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.095848] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.095850] ACPI: IRQ0 used by override. [ 0.095851] ACPI: IRQ9 used by override. [ 0.095852] Using ACPI (MADT) for SMP configuration information [ 0.095853] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.095859] e820: update [mem 0x888cc000-0x88b0cfff] usable ==> reserved [ 0.095869] TSC deadline timer available [ 0.095869] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.095887] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.095889] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.095890] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.095892] PM: hibernation: Registered nosave memory: [mem 0x6ac67000-0x6ac67fff] [ 0.095893] PM: hibernation: Registered nosave memory: [mem 0x6ac77000-0x6ac77fff] [ 0.095894] PM: hibernation: Registered nosave memory: [mem 0x6ac78000-0x6ac78fff] [ 0.095896] PM: hibernation: Registered nosave memory: [mem 0x6ac91000-0x6ac91fff] [ 0.095896] PM: hibernation: Registered nosave memory: [mem 0x6ac92000-0x6ac92fff] [ 0.095898] PM: hibernation: Registered nosave memory: [mem 0x6aca1000-0x6aca1fff] [ 0.095898] PM: hibernation: Registered nosave memory: [mem 0x6aca2000-0x6aca2fff] [ 0.095900] PM: hibernation: Registered nosave memory: [mem 0x6acbb000-0x6acbbfff] [ 0.095901] PM: hibernation: Registered nosave memory: [mem 0x6b4b2000-0x6b4b2fff] [ 0.095902] PM: hibernation: Registered nosave memory: [mem 0x6b4b3000-0x6b4b3fff] [ 0.095903] PM: hibernation: Registered nosave memory: [mem 0x888cc000-0x88b0cfff] [ 0.095905] PM: hibernation: Registered nosave memory: [mem 0x8c0ae000-0x8c0aefff] [ 0.095907] PM: hibernation: Registered nosave memory: [mem 0x8c2c3000-0x8c2c3fff] [ 0.095908] PM: hibernation: Registered nosave memory: [mem 0x8e1ec000-0x8e52efff] [ 0.095910] PM: hibernation: Registered nosave memory: [mem 0x8e6a7000-0x8edb0fff] [ 0.095910] PM: hibernation: Registered nosave memory: [mem 0x8edb1000-0x8fbfdfff] [ 0.095912] PM: hibernation: Registered nosave memory: [mem 0x8fbff000-0x8fffffff] [ 0.095913] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.095913] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.095914] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.095914] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.095915] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.095916] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.095916] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.095917] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.095917] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff] [ 0.095918] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.095919] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.095919] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.095920] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.095921] Booting paravirtualized kernel on bare hardware [ 0.095923] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.095930] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.096034] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u524288 [ 0.096041] pcpu-alloc: s196608 r8192 d28672 u524288 alloc=1*2097152 [ 0.096043] pcpu-alloc: [0] 0 1 2 3 [ 0.096066] Built 1 zonelists, mobility grouping on. Total pages: 12374805 [ 0.096068] Policy zone: Normal [ 0.096069] Kernel command line: BOOT_IMAGE=/BOOT/ubuntu_aoozig@/vmlinuz-5.13.0-14-generic root=ZFS=rpool/ROOT/ubuntu_aoozig ro video=1920x1080@60 quiet splash drm.edid_firmware=edid/edid.bin mpt3sas.logging_level=1 fsck.mode=force fsck.repair=yes cpuidle.governor=teo swapaccount=1 mitigations=off init_on_alloc=0 loglevel=3 [ 0.098328] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.099395] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.099434] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.185096] Memory: 48644140K/50285568K available (16393K kernel code, 3506K rwdata, 10632K rodata, 2872K init, 5756K bss, 1641168K reserved, 0K cma-reserved) [ 0.185102] random: get_random_u64 called from kmem_cache_open+0x23/0x230 with crng_init=0 [ 0.185190] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.185201] ftrace: allocating 51763 entries in 203 pages [ 0.199618] ftrace: allocated 203 pages with 5 groups [ 0.199698] rcu: Hierarchical RCU implementation. [ 0.199699] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.199700] Rude variant of Tasks RCU enabled. [ 0.199701] Tracing variant of Tasks RCU enabled. [ 0.199701] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.199702] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.202927] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.203323] random: crng done (trusting CPU's manufacturer) [ 0.203346] Console: colour dummy device 80x25 [ 0.203362] printk: console [tty0] enabled [ 0.203376] ACPI: Core revision 20210331 [ 0.203637] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.203702] APIC: Switch to symmetric I/O mode setup [ 0.204906] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.209126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.227763] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f9146cb80a, max_idle_ns: 440795296911 ns [ 0.227769] Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.98 BogoMIPS (lpj=13199976) [ 0.227771] pid_max: default: 32768 minimum: 301 [ 0.238128] LSM: Security Framework initializing [ 0.238137] Yama: becoming mindful. [ 0.238157] AppArmor: AppArmor initialized [ 0.238252] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.238335] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.238520] x86/cpu: SGX disabled by BIOS. [ 0.238525] CPU0: Thermal monitoring enabled (TM1) [ 0.238560] process: using mwait in idle threads [ 0.238561] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.238562] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.238566] Speculative Store Bypass: Vulnerable [ 0.238568] SRBDS: Vulnerable [ 0.243465] Freeing SMP alternatives memory: 40K [ 0.243767] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 0.243767] smpboot: CPU0: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.243767] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.243767] ... version: 4 [ 0.243767] ... bit width: 48 [ 0.243767] ... generic registers: 4 [ 0.243767] ... value mask: 0000ffffffffffff [ 0.243767] ... max period: 00007fffffffffff [ 0.243767] ... fixed-purpose events: 3 [ 0.243767] ... event mask: 000000070000000f [ 0.243767] rcu: Hierarchical SRCU implementation. [ 0.243767] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.243767] smp: Bringing up secondary CPUs ... [ 0.243767] x86: Booting SMP configuration: [ 0.243767] .... node #0, CPUs: #1 #2 #3 [ 0.244019] smp: Brought up 1 node, 4 CPUs [ 0.244019] smpboot: Max logical packages: 1 [ 0.244019] smpboot: Total of 4 processors activated (26399.95 BogoMIPS) [ 0.246500] devtmpfs: initialized [ 0.246500] x86/mm: Memory block size: 128MB [ 0.249186] PM: Registering ACPI NVS region [mem 0x6b4b2000-0x6b4b2fff] (4096 bytes) [ 0.249186] PM: Registering ACPI NVS region [mem 0x8e6a7000-0x8edb0fff] (7380992 bytes) [ 0.249186] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.249186] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.249186] pinctrl core: initialized pinctrl subsystem [ 0.249186] PM: RTC time: 17:29:54, date: 2021-09-08 [ 0.249186] NET: Registered protocol family 16 [ 0.249186] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.249186] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.249186] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.249186] audit: initializing netlink subsys (disabled) [ 0.249186] audit: type=2000 audit(1631122193.044:1): state=initialized audit_enabled=0 res=1 [ 0.249186] thermal_sys: Registered thermal governor 'fair_share' [ 0.249186] thermal_sys: Registered thermal governor 'bang_bang' [ 0.249186] thermal_sys: Registered thermal governor 'step_wise' [ 0.249186] thermal_sys: Registered thermal governor 'user_space' [ 0.249186] thermal_sys: Registered thermal governor 'power_allocator' [ 0.249186] EISA bus registered [ 0.249186] cpuidle: using governor ladder [ 0.249186] cpuidle: using governor menu [ 0.249186] cpuidle: using governor teo [ 0.249186] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.249186] ACPI: bus type PCI registered [ 0.249186] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.249186] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.249186] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.249186] PCI: Using configuration type 1 for base access [ 0.252230] Kprobes globally optimized [ 0.252233] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.252233] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.252233] ACPI: Added _OSI(Module Device) [ 0.252233] ACPI: Added _OSI(Processor Device) [ 0.252233] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.252233] ACPI: Added _OSI(Processor Aggregator Device) [ 0.252233] ACPI: Added _OSI(Linux-Dell-Video) [ 0.252233] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.252233] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.290362] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.292284] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.296017] ACPI: Dynamic OEM Table Load: [ 0.296023] ACPI: SSDT 0xFFFF972EC0EB9800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.297025] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.298518] ACPI: Dynamic OEM Table Load: [ 0.298523] ACPI: SSDT 0xFFFF972EC0EB1400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.299433] ACPI: Dynamic OEM Table Load: [ 0.299437] ACPI: SSDT 0xFFFF972EC0FB9A00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.300212] ACPI: Dynamic OEM Table Load: [ 0.300216] ACPI: SSDT 0xFFFF972EC0FB8000 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.301302] ACPI: Dynamic OEM Table Load: [ 0.301307] ACPI: SSDT 0xFFFF972EC0EBC000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.302482] ACPI: Dynamic OEM Table Load: [ 0.302485] ACPI: SSDT 0xFFFF972EC0FB9E00 000197 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.303354] ACPI: Dynamic OEM Table Load: [ 0.303357] ACPI: SSDT 0xFFFF972EC0FB8200 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.306818] ACPI: Interpreter enabled [ 0.306852] ACPI: (supports S0 S3 S4 S5) [ 0.306853] ACPI: Using IOAPIC for interrupt routing [ 0.306887] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.307967] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.310281] ACPI: PM: Power Resource [PG00] (on) [ 0.310709] ACPI: PM: Power Resource [PG01] (on) [ 0.311133] ACPI: PM: Power Resource [PG02] (on) [ 0.313660] ACPI: PM: Power Resource [WRST] (on) [ 0.313951] ACPI: PM: Power Resource [WRST] (on) [ 0.314242] ACPI: PM: Power Resource [WRST] (on) [ 0.314531] ACPI: PM: Power Resource [WRST] (on) [ 0.314827] ACPI: PM: Power Resource [WRST] (on) [ 0.315117] ACPI: PM: Power Resource [WRST] (on) [ 0.315407] ACPI: PM: Power Resource [WRST] (on) [ 0.315696] ACPI: PM: Power Resource [WRST] (on) [ 0.315988] ACPI: PM: Power Resource [WRST] (on) [ 0.316284] ACPI: PM: Power Resource [WRST] (on) [ 0.316577] ACPI: PM: Power Resource [WRST] (on) [ 0.316869] ACPI: PM: Power Resource [WRST] (on) [ 0.317163] ACPI: PM: Power Resource [WRST] (on) [ 0.317458] ACPI: PM: Power Resource [WRST] (on) [ 0.317752] ACPI: PM: Power Resource [WRST] (on) [ 0.318043] ACPI: PM: Power Resource [WRST] (on) [ 0.318334] ACPI: PM: Power Resource [WRST] (on) [ 0.319564] ACPI: PM: Power Resource [WRST] (on) [ 0.319857] ACPI: PM: Power Resource [WRST] (on) [ 0.320146] ACPI: PM: Power Resource [WRST] (on) [ 0.330118] ACPI: PM: Power Resource [FN00] (off) [ 0.330206] ACPI: PM: Power Resource [FN01] (off) [ 0.330291] ACPI: PM: Power Resource [FN02] (off) [ 0.330374] ACPI: PM: Power Resource [FN03] (off) [ 0.330459] ACPI: PM: Power Resource [FN04] (off) [ 0.331502] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.331509] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.331710] acpi PNP0A08:00: _OSC: platform does not support [PME AER] [ 0.331901] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PCIeCapability LTR] [ 0.331902] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.332630] PCI host bridge to bus 0000:00 [ 0.332632] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.332634] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.332635] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.332636] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.332637] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 0.332638] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.332649] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000 [ 0.332824] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.332858] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.333183] pci 0000:00:01.1: [8086:1905] type 01 class 0x060400 [ 0.333216] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.333569] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.333576] pci 0000:00:08.0: reg 0x10: [mem 0xdff4f000-0xdff4ffff 64bit] [ 0.333713] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.333727] pci 0000:00:14.0: reg 0x10: [mem 0xdff30000-0xdff3ffff 64bit] [ 0.333782] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.334331] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.334346] pci 0000:00:14.2: reg 0x10: [mem 0xdff4e000-0xdff4efff 64bit] [ 0.334502] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.334520] pci 0000:00:16.0: reg 0x10: [mem 0xdff4d000-0xdff4dfff 64bit] [ 0.334583] pci 0000:00:16.0: PME# supported from D3hot [ 0.334891] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.334902] pci 0000:00:17.0: reg 0x10: [mem 0xdff48000-0xdff49fff] [ 0.334908] pci 0000:00:17.0: reg 0x14: [mem 0xdff4c000-0xdff4c0ff] [ 0.334914] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] [ 0.334920] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] [ 0.334926] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] [ 0.334931] pci 0000:00:17.0: reg 0x24: [mem 0xdff4b000-0xdff4b7ff] [ 0.334965] pci 0000:00:17.0: PME# supported from D3hot [ 0.335237] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400 [ 0.335291] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.335796] pci 0000:00:1b.2: [8086:a169] type 01 class 0x060400 [ 0.335856] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold [ 0.336376] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 0.336435] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.336945] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400 [ 0.337004] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.337516] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 [ 0.337575] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.338101] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100 [ 0.338439] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.338452] pci 0000:00:1f.2: reg 0x10: [mem 0xdff44000-0xdff47fff] [ 0.338744] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.338764] pci 0000:00:1f.3: reg 0x10: [mem 0xdff40000-0xdff43fff 64bit] [ 0.338793] pci 0000:00:1f.3: reg 0x20: [mem 0xdff20000-0xdff2ffff 64bit] [ 0.338837] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.339387] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.339444] pci 0000:00:1f.4: reg 0x10: [mem 0xdff4a000-0xdff4a0ff 64bit] [ 0.339513] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] [ 0.339837] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 [ 0.339855] pci 0000:00:1f.6: reg 0x10: [mem 0xdff00000-0xdff1ffff] [ 0.339956] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.340247] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400 [ 0.340259] pci 0000:01:00.0: reg 0x10: [mem 0xdfa00000-0xdfa03fff] [ 0.340345] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.340396] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link) [ 0.340458] pci 0000:00:01.0: PCI bridge to [bus 01-03] [ 0.340461] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.340462] pci 0000:00:01.0: bridge window [mem 0xdf900000-0xdfafffff] [ 0.340465] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.340507] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400 [ 0.340592] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.340672] pci 0000:01:00.0: PCI bridge to [bus 02-03] [ 0.340676] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.340679] pci 0000:01:00.0: bridge window [mem 0xdf900000-0xdf9fffff] [ 0.340682] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.340724] pci 0000:03:00.0: [1002:7340] type 00 class 0x030000 [ 0.340737] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.340746] pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.340752] pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.340758] pci 0000:03:00.0: reg 0x24: [mem 0xdf900000-0xdf97ffff] [ 0.340764] pci 0000:03:00.0: reg 0x30: [mem 0xdf980000-0xdf99ffff pref] [ 0.340786] pci 0000:03:00.0: BAR 0: assigned to efifb [ 0.340838] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.340891] pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.340929] pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300 [ 0.340940] pci 0000:03:00.1: reg 0x10: [mem 0xdf9a0000-0xdf9a3fff] [ 0.341017] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.341079] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.341083] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 0.341085] pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdf9fffff] [ 0.341089] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.341131] pci 0000:04:00.0: [1000:0072] type 00 class 0x010700 [ 0.341140] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.341146] pci 0000:04:00.0: reg 0x14: [mem 0xdfec0000-0xdfec3fff 64bit] [ 0.341153] pci 0000:04:00.0: reg 0x1c: [mem 0xdfe80000-0xdfebffff 64bit] [ 0.341161] pci 0000:04:00.0: reg 0x30: [mem 0xdfe00000-0xdfe7ffff pref] [ 0.341199] pci 0000:04:00.0: supports D1 D2 [ 0.341211] pci 0000:04:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.341212] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0003ffff 64bit] (contains BAR0 for 16 VFs) [ 0.341218] pci 0000:04:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.341219] pci 0000:04:00.0: VF(n) BAR2 space: [mem 0x00000000-0x003fffff 64bit] (contains BAR2 for 16 VFs) [ 0.341307] pci 0000:00:01.1: PCI bridge to [bus 04] [ 0.341309] pci 0000:00:01.1: bridge window [io 0xd000-0xdfff] [ 0.341310] pci 0000:00:01.1: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.341402] acpiphp: Slot [1] registered [ 0.341405] pci 0000:00:1b.0: PCI bridge to [bus 05] [ 0.341882] pci 0000:06:00.0: [15b3:1003] type 00 class 0x020000 [ 0.342281] pci 0000:06:00.0: reg 0x10: [mem 0xdf800000-0xdf8fffff 64bit] [ 0.342546] pci 0000:06:00.0: reg 0x18: [mem 0xd0800000-0xd0ffffff 64bit pref] [ 0.343038] pci 0000:06:00.0: reg 0x30: [mem 0xdf700000-0xdf7fffff pref] [ 0.345191] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:1b.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.345705] pci 0000:00:1b.2: PCI bridge to [bus 06] [ 0.345709] pci 0000:00:1b.2: bridge window [mem 0xdf700000-0xdf8fffff] [ 0.345712] pci 0000:00:1b.2: bridge window [mem 0xd0800000-0xd0ffffff 64bit pref] [ 0.345813] pci 0000:07:00.0: [1b21:1242] type 00 class 0x0c0330 [ 0.345834] pci 0000:07:00.0: reg 0x10: [mem 0xdfd00000-0xdfd07fff 64bit] [ 0.345883] pci 0000:07:00.0: enabling Extended Tags [ 0.345955] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 0.346256] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.346260] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.346358] pci 0000:08:00.0: [1b21:3242] type 00 class 0x0c0330 [ 0.346376] pci 0000:08:00.0: reg 0x10: [mem 0xdfc00000-0xdfc07fff 64bit] [ 0.346417] pci 0000:08:00.0: enabling Extended Tags [ 0.346477] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.346771] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.346775] pci 0000:00:1c.4: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.346876] pci 0000:09:00.0: [15b7:5006] type 00 class 0x010802 [ 0.346894] pci 0000:09:00.0: reg 0x10: [mem 0xdfb00000-0xdfb03fff 64bit] [ 0.346918] pci 0000:09:00.0: reg 0x20: [mem 0xdfb04000-0xdfb040ff 64bit] [ 0.347273] pci 0000:00:1d.0: PCI bridge to [bus 09] [ 0.347277] pci 0000:00:1d.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.349464] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.349520] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.349574] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.349627] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.349680] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.349733] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.349786] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.349838] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.354335] acpi LNXPOWER:16: Turning OFF [ 0.354372] acpi LNXPOWER:15: Turning OFF [ 0.354403] acpi LNXPOWER:14: Turning OFF [ 0.354434] acpi LNXPOWER:13: Turning OFF [ 0.354465] acpi LNXPOWER:12: Turning OFF [ 0.354495] acpi LNXPOWER:11: Turning OFF [ 0.354526] acpi LNXPOWER:10: Turning OFF [ 0.354556] acpi LNXPOWER:0f: Turning OFF [ 0.354587] acpi LNXPOWER:0e: Turning OFF [ 0.354617] acpi LNXPOWER:0d: Turning OFF [ 0.354648] acpi LNXPOWER:0c: Turning OFF [ 0.354678] acpi LNXPOWER:0b: Turning OFF [ 0.354708] acpi LNXPOWER:0a: Turning OFF [ 0.354738] acpi LNXPOWER:09: Turning OFF [ 0.354769] acpi LNXPOWER:08: Turning OFF [ 0.354799] acpi LNXPOWER:07: Turning OFF [ 0.354829] acpi LNXPOWER:06: Turning OFF [ 0.354861] acpi LNXPOWER:05: Turning OFF [ 0.354892] acpi LNXPOWER:04: Turning OFF [ 0.354922] acpi LNXPOWER:03: Turning OFF [ 0.355009] iommu: Default domain type: Translated [ 0.355009] SCSI subsystem initialized [ 0.355009] libata version 3.00 loaded. [ 0.355009] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 0.355009] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.355009] pci 0000:03:00.0: vgaarb: bridge control possible [ 0.355009] vgaarb: loaded [ 0.355009] ACPI: bus type USB registered [ 0.355009] usbcore: registered new interface driver usbfs [ 0.355009] usbcore: registered new interface driver hub [ 0.355009] usbcore: registered new device driver usb [ 0.355009] pps_core: LinuxPPS API ver. 1 registered [ 0.355009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.355009] PTP clock support registered [ 0.355009] EDAC MC: Ver: 3.0.0 [ 0.355009] Registered efivars operations [ 0.355009] NetLabel: Initializing [ 0.355009] NetLabel: domain hash size = 128 [ 0.355009] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.355009] NetLabel: unlabeled traffic allowed by default [ 0.355009] PCI: Using ACPI for IRQ routing [ 0.383038] PCI: pci_cache_line_size set to 64 bytes [ 0.383125] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.383127] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.383128] e820: reserve RAM buffer [mem 0x6ac67018-0x6bffffff] [ 0.383129] e820: reserve RAM buffer [mem 0x6ac78018-0x6bffffff] [ 0.383131] e820: reserve RAM buffer [mem 0x6ac92018-0x6bffffff] [ 0.383132] e820: reserve RAM buffer [mem 0x6aca2018-0x6bffffff] [ 0.383132] e820: reserve RAM buffer [mem 0x6b4b2000-0x6bffffff] [ 0.383133] e820: reserve RAM buffer [mem 0x888cc000-0x8bffffff] [ 0.383134] e820: reserve RAM buffer [mem 0x8c0ae000-0x8fffffff] [ 0.383135] e820: reserve RAM buffer [mem 0x8c2c3000-0x8fffffff] [ 0.383136] e820: reserve RAM buffer [mem 0x8e1ec000-0x8fffffff] [ 0.383137] e820: reserve RAM buffer [mem 0x8e6a7000-0x8fffffff] [ 0.383138] e820: reserve RAM buffer [mem 0x8fbff000-0x8fffffff] [ 0.383139] e820: reserve RAM buffer [mem 0xc6f000000-0xc6fffffff] [ 0.384079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.384085] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.386141] clocksource: Switched to clocksource tsc-early [ 0.389397] VFS: Disk quotas dquot_6.6.0 [ 0.389397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.389397] AppArmor: AppArmor Filesystem Enabled [ 0.389397] pnp: PnP ACPI init [ 0.389397] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.389397] system 00:00: [io 0x0a10-0x0a1f] has been reserved [ 0.389397] system 00:00: [io 0x0a20-0x0a2f] has been reserved [ 0.389397] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 0.389397] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.389397] pnp 00:01: [dma 0 disabled] [ 0.389397] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.391992] pnp 00:02: [dma 0 disabled] [ 0.392022] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.392149] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.392151] system 00:03: [io 0xffff] has been reserved [ 0.392152] system 00:03: [io 0xffff] has been reserved [ 0.392153] system 00:03: [io 0xffff] has been reserved [ 0.392154] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.392155] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.392158] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.392243] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.392246] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.392260] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.392291] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.392294] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.392530] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.392532] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.392533] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.392534] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.392535] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.392536] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.392538] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.392539] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.392540] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.392541] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved [ 0.392544] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.392581] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.392582] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.392583] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.392584] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.392586] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.392587] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.392589] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.392882] system 00:09: [io 0xff00-0xfffe] has been reserved [ 0.392885] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.394077] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.394078] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.394080] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.394083] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.394982] pnp: PnP ACPI: found 11 devices [ 0.400257] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.400298] NET: Registered protocol family 2 [ 0.400406] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.401922] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.402160] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.402555] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.402618] TCP: Hash tables configured (established 524288 bind 65536) [ 0.402753] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 0.402978] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.403102] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.403207] NET: Registered protocol family 1 [ 0.403211] NET: Registered protocol family 44 [ 0.403219] pci_bus 0000:00: max bus depth: 3 pci_try_num: 4 [ 0.403227] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.403230] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 0.403234] pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdf9fffff] [ 0.403237] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403241] pci 0000:01:00.0: PCI bridge to [bus 02-03] [ 0.403243] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.403246] pci 0000:01:00.0: bridge window [mem 0xdf900000-0xdf9fffff] [ 0.403248] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403252] pci 0000:00:01.0: PCI bridge to [bus 01-03] [ 0.403253] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.403255] pci 0000:00:01.0: bridge window [mem 0xdf900000-0xdfafffff] [ 0.403257] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403261] pci 0000:04:00.0: BAR 9: no space for [mem size 0x00400000 64bit] [ 0.403263] pci 0000:04:00.0: BAR 9: failed to assign [mem size 0x00400000 64bit] [ 0.403264] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00040000 64bit] [ 0.403265] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00040000 64bit] [ 0.403267] pci 0000:00:01.1: PCI bridge to [bus 04] [ 0.403268] pci 0000:00:01.1: bridge window [io 0xd000-0xdfff] [ 0.403270] pci 0000:00:01.1: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.403273] pci 0000:00:1b.0: PCI bridge to [bus 05] [ 0.403279] pci 0000:00:1b.2: PCI bridge to [bus 06] [ 0.403282] pci 0000:00:1b.2: bridge window [mem 0xdf700000-0xdf8fffff] [ 0.403284] pci 0000:00:1b.2: bridge window [mem 0xd0800000-0xd0ffffff 64bit pref] [ 0.403287] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.403290] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.403294] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.403297] pci 0000:00:1c.4: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.403301] pci 0000:00:1d.0: PCI bridge to [bus 09] [ 0.403304] pci 0000:00:1d.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.403308] pci_bus 0000:00: No. 2 try to assign unassigned res [ 0.403309] release child resource [mem 0xdfe00000-0xdfe7ffff pref] [ 0.403310] release child resource [mem 0xdfe80000-0xdfebffff 64bit] [ 0.403310] release child resource [mem 0xdfec0000-0xdfec3fff 64bit] [ 0.403311] pci 0000:00:01.1: resource 14 [mem 0xdfe00000-0xdfefffff] released [ 0.403313] pci 0000:00:01.1: PCI bridge to [bus 04] [ 0.403317] pci 0000:00:01.1: BAR 14: assigned [mem 0x90000000-0x905fffff] [ 0.403319] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.403321] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 0.403324] pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdf9fffff] [ 0.403326] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403330] pci 0000:01:00.0: PCI bridge to [bus 02-03] [ 0.403332] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.403335] pci 0000:01:00.0: bridge window [mem 0xdf900000-0xdf9fffff] [ 0.403337] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403341] pci 0000:00:01.0: PCI bridge to [bus 01-03] [ 0.403342] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.403344] pci 0000:00:01.0: bridge window [mem 0xdf900000-0xdfafffff] [ 0.403345] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403348] pci 0000:04:00.0: BAR 6: assigned [mem 0x90000000-0x9007ffff pref] [ 0.403350] pci 0000:04:00.0: BAR 3: assigned [mem 0x90080000-0x900bffff 64bit] [ 0.403355] pci 0000:04:00.0: BAR 9: assigned [mem 0x900c0000-0x904bffff 64bit] [ 0.403358] pci 0000:04:00.0: BAR 1: assigned [mem 0x904c0000-0x904c3fff 64bit] [ 0.403363] pci 0000:04:00.0: BAR 7: assigned [mem 0x904c4000-0x90503fff 64bit] [ 0.403366] pci 0000:00:01.1: PCI bridge to [bus 04] [ 0.403367] pci 0000:00:01.1: bridge window [io 0xd000-0xdfff] [ 0.403368] pci 0000:00:01.1: bridge window [mem 0x90000000-0x905fffff] [ 0.403372] pci 0000:00:1b.0: PCI bridge to [bus 05] [ 0.403378] pci 0000:00:1b.2: PCI bridge to [bus 06] [ 0.403380] pci 0000:00:1b.2: bridge window [mem 0xdf700000-0xdf8fffff] [ 0.403382] pci 0000:00:1b.2: bridge window [mem 0xd0800000-0xd0ffffff 64bit pref] [ 0.403385] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.403388] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.403392] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.403395] pci 0000:00:1c.4: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.403399] pci 0000:00:1d.0: PCI bridge to [bus 09] [ 0.403401] pci 0000:00:1d.0: bridge window [mem 0xdfb00000-0xdfbfffff] [ 0.403406] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.403407] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.403408] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.403409] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] [ 0.403410] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.403412] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.403413] pci_bus 0000:01: resource 1 [mem 0xdf900000-0xdfafffff] [ 0.403413] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403415] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.403415] pci_bus 0000:02: resource 1 [mem 0xdf900000-0xdf9fffff] [ 0.403416] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403418] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.403418] pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdf9fffff] [ 0.403419] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.403420] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.403421] pci_bus 0000:04: resource 1 [mem 0x90000000-0x905fffff] [ 0.403423] pci_bus 0000:06: resource 1 [mem 0xdf700000-0xdf8fffff] [ 0.403424] pci_bus 0000:06: resource 2 [mem 0xd0800000-0xd0ffffff 64bit pref] [ 0.403425] pci_bus 0000:07: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 0.403426] pci_bus 0000:08: resource 1 [mem 0xdfc00000-0xdfcfffff] [ 0.403427] pci_bus 0000:09: resource 1 [mem 0xdfb00000-0xdfbfffff] [ 0.438794] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x120 took 34388 usecs [ 0.438827] pci 0000:03:00.0: disabling ATS [ 0.438833] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.438853] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 0.439219] PCI: CLS 64 bytes, default 64 [ 0.439224] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.439225] software IO TLB: mapped [mem 0x0000000066c67000-0x000000006ac67000] (64MB) [ 0.439255] Trying to unpack rootfs image as initramfs... [ 0.444270] Initialise system trusted keyrings [ 0.444279] Key type blacklist registered [ 0.444301] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 0.445128] zbud: loaded [ 0.445320] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.445414] fuse: init (API version 7.33) [ 0.445510] integrity: Platform Keyring initialized [ 0.452397] Key type asymmetric registered [ 0.452400] Asymmetric key parser 'x509' registered [ 0.452412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.452436] io scheduler mq-deadline registered [ 0.453635] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.453678] efifb: probing for efifb [ 0.453699] efifb: Ignoring BGRT: unexpected or invalid BMP data [ 0.453699] efifb: framebuffer at 0xc0000000, using 8100k, total 8100k [ 0.453701] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.453702] efifb: scrolling: redraw [ 0.453702] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.453736] fbcon: Deferring console take-over [ 0.453737] fb0: EFI VGA frame buffer device [ 0.454038] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.454056] ACPI: button: Sleep Button [SLPB] [ 0.454077] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.454087] ACPI: button: Power Button [PWRB] [ 0.454107] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.454128] ACPI: button: Power Button [PWRF] [ 0.454434] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 0.455585] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.455587] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.455850] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.455852] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.456053] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.476862] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.499126] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.500343] Linux agpgart interface v0.103 [ 0.502658] loop: module loaded [ 0.502860] libphy: Fixed MDIO Bus: probed [ 0.502861] tun: Universal TUN/TAP device driver, 1.6 [ 0.502881] PPP generic driver version 2.4.2 [ 0.502915] VFIO - User Level meta-driver version: 0.3 [ 0.502972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.502975] ehci-pci: EHCI PCI platform driver [ 0.502984] ehci-platform: EHCI generic platform driver [ 0.502989] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.502991] ohci-pci: OHCI PCI platform driver [ 0.502996] ohci-platform: OHCI generic platform driver [ 0.503000] uhci_hcd: USB Universal Host Controller Interface driver [ 0.503026] i8042: PNP: No PS/2 controller found. [ 0.503063] mousedev: PS/2 mouse device common for all mice [ 0.503147] rtc_cmos 00:05: RTC can wake from S4 [ 0.503747] rtc_cmos 00:05: registered as rtc0 [ 0.503891] rtc_cmos 00:05: setting system clock to 2021-09-08T17:29:54 UTC (1631122194) [ 0.503903] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.503909] i2c /dev entries driver [ 0.504036] device-mapper: uevent: version 1.0.3 [ 0.504068] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.504082] platform eisa.0: Probing EISA bus 0 [ 0.504084] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.504085] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.504086] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.504086] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.504087] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.504088] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.504089] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.504089] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.504090] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.504091] platform eisa.0: EISA: Detected 0 cards [ 0.504093] intel_pstate: Intel P-state driver initializing [ 0.504256] intel_pstate: HWP enabled [ 0.504399] ledtrig-cpu: registered to indicate activity on CPUs [ 0.504403] EFI Variables Facility v0.08 2004-May-17 [ 0.529723] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff] [ 0.529726] caller pmc_core_probe+0xa3/0x220 mapping multiple BARs [ 0.529739] intel_pmc_core INT33A1:00: initialized [ 0.529811] drop_monitor: Initializing network drop monitor service [ 0.529932] NET: Registered protocol family 10 [ 1.027729] Freeing initrd memory: 73192K [ 1.032138] Segment Routing with IPv6 [ 1.032159] NET: Registered protocol family 17 [ 1.032185] Key type dns_resolver registered [ 1.032407] microcode: sig=0x506e3, pf=0x2, revision=0xea [ 1.032434] microcode: Microcode Update Driver: v2.2. [ 1.032437] IPI shorthand broadcast: enabled [ 1.032444] sched_clock: Marking stable (1031875896, 556023)->(1039128272, -6696353) [ 1.032557] registered taskstats version 1 [ 1.032566] Loading compiled-in X.509 certificates [ 1.033086] Loaded X.509 cert 'Build time autogenerated kernel key: ca6ebf590ae9ab766253f24be6936125e0a11713' [ 1.033540] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.033989] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.033990] blacklist: Loading compiled-in revocation X.509 certificates [ 1.034002] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.034082] zswap: loaded using pool lzo/zbud [ 1.034160] Key type ._fscrypt registered [ 1.034161] Key type .fscrypt registered [ 1.034162] Key type fscrypt-provisioning registered [ 1.036136] Key type encrypted registered [ 1.036139] AppArmor: AppArmor sha1 policy hashing enabled [ 1.037360] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.037625] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 1.037627] ima: No TPM chip found, activating TPM-bypass! [ 1.037629] Loading compiled-in module X.509 certificates [ 1.038091] Loaded X.509 cert 'Build time autogenerated kernel key: ca6ebf590ae9ab766253f24be6936125e0a11713' [ 1.038092] ima: Allocated hash algorithm: sha1 [ 1.038097] ima: No architecture policies found [ 1.038103] evm: Initialising EVM extended attributes: [ 1.038104] evm: security.selinux [ 1.038104] evm: security.SMACK64 [ 1.038105] evm: security.SMACK64EXEC [ 1.038105] evm: security.SMACK64TRANSMUTE [ 1.038105] evm: security.SMACK64MMAP [ 1.038106] evm: security.apparmor [ 1.038106] evm: security.ima [ 1.038107] evm: security.capability [ 1.038107] evm: HMAC attrs: 0x1 [ 1.038319] PM: Magic number: 5:349:491 [ 1.038477] RAS: Correctable Errors collector initialized. [ 1.039285] Freeing unused decrypted memory: 2036K [ 1.039561] Freeing unused kernel image (initmem) memory: 2872K [ 1.059857] Write protecting the kernel read-only data: 30720k [ 1.060230] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.060400] Freeing unused kernel image (rodata/data gap) memory: 1656K [ 1.072884] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.072890] Run /init as init process [ 1.072891] with arguments: [ 1.072892] /init [ 1.072892] splash [ 1.072893] with environment: [ 1.072894] HOME=/ [ 1.072894] TERM=linux [ 1.072895] BOOT_IMAGE=/BOOT/ubuntu_aoozig@/vmlinuz-5.13.0-14-generic [ 1.201852] ahci 0000:00:17.0: version 3.0 [ 1.202128] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.202135] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.203194] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 [ 1.203610] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 1.203613] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.203615] usb usb1: Product: xHCI Host Controller [ 1.203617] usb usb1: Manufacturer: Linux 5.13.0-14-generic xhci-hcd [ 1.203619] usb usb1: SerialNumber: 0000:00:14.0 [ 1.203725] hub 1-0:1.0: USB hub found [ 1.203741] hub 1-0:1.0: 16 ports detected [ 1.205985] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.207151] e1000e: Intel(R) PRO/1000 Network Driver [ 1.207153] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.207238] mlx4_core: Mellanox ConnectX core driver v4.0-0 [ 1.207259] mlx4_core: Initializing 0000:06:00.0 [ 1.207432] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.207586] cryptd: max_cpu_qlen set to 1000 [ 1.209761] i2c i2c-0: 3/4 memory slots populated (from DMI) [ 1.210281] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.210601] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.210878] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.210883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.210886] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.210921] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 1.210924] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.210926] usb usb2: Product: xHCI Host Controller [ 1.210927] usb usb2: Manufacturer: Linux 5.13.0-14-generic xhci-hcd [ 1.210929] usb usb2: SerialNumber: 0000:00:14.0 [ 1.210992] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.211023] hub 2-0:1.0: USB hub found [ 1.211036] hub 2-0:1.0: 10 ports detected [ 1.212089] usb: port power management may be unreliable [ 1.212535] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.212540] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 [ 1.215952] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.215958] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 1.218268] AVX2 version of gcm_enc/dec engaged. [ 1.218292] AES CTR mode by8 optimization enabled [ 1.222540] setting logging_level(0x00000001) [ 1.222586] mpt3sas version 37.101.00.00 loaded [ 1.222696] mpt3sas 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.222874] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (49295640 kB) [ 1.249504] nvme nvme0: pci function 0000:09:00.0 [ 1.259553] nvme nvme0: 4/0/0 default/read/poll queues [ 1.261747] nvme0n1: p1 p2 p3 p4 p5 [ 1.272069] xhci_hcd 0000:07:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010 [ 1.272290] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 1.272293] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.272295] usb usb3: Product: xHCI Host Controller [ 1.272297] usb usb3: Manufacturer: Linux 5.13.0-14-generic xhci-hcd [ 1.272298] usb usb3: SerialNumber: 0000:07:00.0 [ 1.272411] hub 3-0:1.0: USB hub found [ 1.272420] hub 3-0:1.0: 2 ports detected [ 1.272540] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.272545] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4 [ 1.272551] xhci_hcd 0000:07:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.272576] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.272590] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 1.272591] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.272593] usb usb4: Product: xHCI Host Controller [ 1.272594] usb usb4: Manufacturer: Linux 5.13.0-14-generic xhci-hcd [ 1.272594] usb usb4: SerialNumber: 0000:07:00.0 [ 1.272662] hub 4-0:1.0: USB hub found [ 1.272668] hub 4-0:1.0: 2 ports detected [ 1.272874] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 1.272878] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5 [ 1.284484] scsi host1: ahci [ 1.284619] scsi host2: ahci [ 1.284899] scsi host3: ahci [ 1.285116] scsi host4: ahci [ 1.285251] scsi host5: ahci [ 1.285486] scsi host6: ahci [ 1.285518] ata1: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b100 irq 128 [ 1.285521] ata2: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b180 irq 128 [ 1.285522] ata3: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b200 irq 128 [ 1.285524] ata4: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b280 irq 128 [ 1.285526] ata5: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b300 irq 128 [ 1.285528] ata6: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b380 irq 128 [ 1.328917] xhci_hcd 0000:08:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010 [ 1.329105] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 1.329108] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.329110] usb usb5: Product: xHCI Host Controller [ 1.329111] usb usb5: Manufacturer: Linux 5.13.0-14-generic xhci-hcd [ 1.329113] usb usb5: SerialNumber: 0000:08:00.0 [ 1.329204] hub 5-0:1.0: USB hub found [ 1.329210] hub 5-0:1.0: 1 port detected [ 1.329302] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 1.329306] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6 [ 1.329309] xhci_hcd 0000:08:00.0: Host supports USB 3.2 Enhanced SuperSpeed [ 1.329356] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.329372] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 1.329375] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.329376] usb usb6: Product: xHCI Host Controller [ 1.329378] usb usb6: Manufacturer: Linux 5.13.0-14-generic xhci-hcd [ 1.329379] usb usb6: SerialNumber: 0000:08:00.0 [ 1.329453] hub 6-0:1.0: USB hub found [ 1.329458] hub 6-0:1.0: 1 port detected [ 1.336893] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.336900] mpt2sas_cm0: MSI-X vectors supported: 1 [ 1.336901] no of cores: 4, max_msix_vectors: -1 [ 1.336902] mpt2sas_cm0: 0 1 [ 1.336944] mpt2sas_cm0: High IOPs queues : disabled [ 1.336945] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 146 [ 1.336946] mpt2sas_cm0: iomem(0x00000000904c0000), mapped(0x000000008439b330), size(16384) [ 1.336948] mpt2sas_cm0: ioport(0x000000000000d000), size(256) [ 1.391289] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.415780] tsc: Refined TSC clocksource calibration: 3312.000 MHz [ 1.415784] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd93f9e57, max_idle_ns: 440795263784 ns [ 1.610408] usb 1-10: new full-speed USB device number 2 using xhci_hcd [ 1.610412] clocksource: Switched to clocksource tsc [ 1.613435] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15) [ 1.613479] mpt2sas_cm0: request pool(0x00000000fe29920c) - dma(0x119400000): depth(3492), frame_size(128), pool_size(436 kB) [ 1.623028] mpt2sas_cm0: sense pool(0x000000001ec83e0d) - dma(0x119b00000): depth(3367), element_size(96), pool_size (315 kB) [ 1.623032] mpt2sas_cm0: sense pool(0x000000001ec83e0d)- dma(0x119b00000): depth(3367),element_size(96), pool_size(0 kB) [ 1.623088] mpt2sas_cm0: reply pool(0x0000000080627b98) - dma(0x119b80000): depth(3556), frame_size(128), pool_size(444 kB) [ 1.623098] mpt2sas_cm0: config page(0x00000000b3a00395) - dma(0x119a72000): size(512) [ 1.623100] mpt2sas_cm0: Allocated physical memory: size(7579 kB) [ 1.623100] mpt2sas_cm0: Current Controller Queue Depth(3364),Max Controller Queue Depth(3432) [ 1.623101] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 1.667151] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 1.668357] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.02.04.00) [ 1.668360] mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) [ 1.668424] scsi host0: Fusion MPT SAS Host [ 1.668905] mpt2sas_cm0: sending port enable !! [ 1.711987] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.712004] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.712041] ata3: SATA link down (SStatus 4 SControl 300) [ 1.712056] ata5: SATA link down (SStatus 4 SControl 300) [ 1.712070] ata6: SATA link down (SStatus 4 SControl 300) [ 1.712082] ata4: SATA link down (SStatus 4 SControl 300) [ 1.713541] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330) [ 1.713550] No Local Variables are initialized for Method [_GTF] [ 1.713552] No Arguments are initialized for method [_GTF] [ 1.713554] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529) [ 1.713591] ata2.00: supports DRM functions and may not be fully accessible [ 1.713914] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330) [ 1.713920] No Local Variables are initialized for Method [_GTF] [ 1.713922] No Arguments are initialized for method [_GTF] [ 1.713924] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529) [ 1.713949] ata1.00: supports DRM functions and may not be fully accessible [ 1.714174] ata2.00: disabling queued TRIM support [ 1.714175] ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 1.714177] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.715845] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330) [ 1.715851] No Local Variables are initialized for Method [_GTF] [ 1.715853] No Arguments are initialized for method [_GTF] [ 1.715855] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529) [ 1.715907] ata2.00: supports DRM functions and may not be fully accessible [ 1.716432] ata2.00: disabling queued TRIM support [ 1.717877] ata2.00: configured for UDMA/133 [ 1.718817] ata1.00: disabling queued TRIM support [ 1.718833] ata1.00: ATA-9: Samsung SSD 850 PRO 128GB, EXM04B6Q, max UDMA/133 [ 1.718835] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.724164] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330) [ 1.724191] No Local Variables are initialized for Method [_GTF] [ 1.724197] No Arguments are initialized for method [_GTF] [ 1.724204] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529) [ 1.724257] ata1.00: supports DRM functions and may not be fully accessible [ 1.729001] ata1.00: disabling queued TRIM support [ 1.733825] ata1.00: configured for UDMA/133 [ 1.733856] scsi: waiting for bus probes to complete ... [ 1.738522] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.758052] usb 1-10: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11 [ 1.758063] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.758069] usb 1-10: Product: USB Receiver [ 1.758073] usb 1-10: Manufacturer: Logitech [ 1.785954] usb 6-1: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 6.b3 [ 1.785965] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.785971] usb 6-1: Product: USB3.1 Hub [ 1.785975] usb 6-1: Manufacturer: VIA Labs, Inc. [ 1.785979] usb 6-1: SerialNumber: 000000001 [ 1.791660] hub 6-1:1.0: USB hub found [ 1.791955] hub 6-1:1.0: 4 ports detected [ 1.868051] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.883801] usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd [ 1.888091] usb 3-2: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00 [ 1.888103] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.888109] usb 3-2: Product: Ultra USB 3.0 [ 1.888113] usb 3-2: Manufacturer: SanDisk [ 1.888117] usb 3-2: SerialNumber: 4C530001161112123304 [ 1.905968] usb-storage 3-2:1.0: USB Mass Storage device detected [ 1.906266] scsi host7: usb-storage 3-2:1.0 [ 1.906460] usbcore: registered new interface driver usb-storage [ 1.910444] usbcore: registered new interface driver uas [ 1.915091] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 1.923373] usb 2-5: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=30.00 [ 1.923384] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.923390] usb 2-5: Product: RTL9210 [ 1.923393] usb 2-5: Manufacturer: Realtek [ 1.923397] usb 2-5: SerialNumber: 012345678903 [ 1.927005] usb 2-5: Enable of device-initiated U1 failed. [ 1.928620] usb 2-5: Enable of device-initiated U2 failed. [ 1.935083] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 4c:cc:6a:0f:ab:02 [ 1.935097] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.935205] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.941573] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 2.012472] usb 2-5: Enable of device-initiated U1 failed. [ 2.014119] usb 2-5: Enable of device-initiated U2 failed. [ 2.016363] scsi host8: uas [ 2.019921] scsi 8:0:0:0: Direct-Access NVMe CT500P1SSD8 R010 PQ: 0 ANSI: 6 [ 2.047109] usb 1-14: new high-speed USB device number 3 using xhci_hcd [ 2.066566] usb 5-1: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 6.b3 [ 2.066577] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.066583] usb 5-1: Product: USB2.0 Hub [ 2.066587] usb 5-1: Manufacturer: VIA Labs, Inc. [ 2.066591] usb 5-1: SerialNumber: 000000001 [ 2.072182] hub 5-1:1.0: USB hub found [ 2.072337] hub 5-1:1.0: 4 ports detected [ 2.197892] usb 1-14: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26 [ 2.197898] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.197901] usb 1-14: Product: USB2.0 Hub [ 2.197902] usb 1-14: Manufacturer: GenesysLogic [ 2.198737] hub 1-14:1.0: USB hub found [ 2.199010] hub 1-14:1.0: 4 ports detected [ 2.327717] usb 2-6: new SuperSpeed USB device number 3 using xhci_hcd [ 2.361110] usb 2-6: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=30.00 [ 2.361113] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.361114] usb 2-6: Product: RTL9210 [ 2.361115] usb 2-6: Manufacturer: Realtek [ 2.361116] usb 2-6: SerialNumber: 012345678903 [ 2.364675] usb 2-6: Enable of device-initiated U1 failed. [ 2.366319] usb 2-6: Enable of device-initiated U2 failed. [ 2.439826] usb 6-1.2: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd [ 2.445419] usb 2-6: Enable of device-initiated U1 failed. [ 2.447054] usb 2-6: Enable of device-initiated U2 failed. [ 2.448754] scsi host9: uas [ 2.452364] scsi 9:0:0:0: Direct-Access NVMe Samsung SSD 950 BXX7 PQ: 0 ANSI: 6 [ 2.459402] hid: raw HID events driver (C) Jiri Kosina [ 2.464603] usbcore: registered new interface driver usbhid [ 2.464606] usbhid: USB HID core driver [ 2.467057] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046D:C52B.0001/input/input3 [ 2.467175] usb 6-1.2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 4.31 [ 2.467178] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.467179] usb 6-1.2: Product: VLI Product String [ 2.467180] usb 6-1.2: Manufacturer: VLI Manufacture String [ 2.467181] usb 6-1.2: SerialNumber: ABCDEFA75256 [ 2.487070] usb 1-14.3: new full-speed USB device number 4 using xhci_hcd [ 2.497184] scsi host10: uas [ 2.498011] scsi 10:0:0:0: Direct-Access WDC WD10 0EMAZ-00WJTA 83.H PQ: 0 ANSI: 6 [ 2.527184] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10/input0 [ 2.527358] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0002/input/input4 [ 2.527597] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0002/input/input5 [ 2.579798] usb 6-1.3: new SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd [ 2.591241] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C52B.0002/input/input6 [ 2.591634] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10/input1 [ 2.591801] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2 [ 2.592717] usb 1-14.3: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 0.90 [ 2.592721] usb 1-14.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.592723] usb 1-14.3: Product: Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3 [ 2.592725] usb 1-14.3: Manufacturer: American Power Conversion [ 2.592727] usb 1-14.3: SerialNumber: 3B1927X25425 [ 2.598151] hid-generic 0003:051D:0002.0004: hiddev2,hidraw3: USB HID v1.00 Device [American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3 ] on usb-0000:00:14.0-14.3/input0 [ 2.628673] usb 6-1.3: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 6.73 [ 2.628676] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.628677] usb 6-1.3: Product: USB3.1 Hub [ 2.628678] usb 6-1.3: Manufacturer: VIA Labs, Inc. [ 2.628679] usb 6-1.3: SerialNumber: 000000001 [ 2.634947] hub 6-1.3:1.0: USB hub found [ 2.635419] hub 6-1.3:1.0: 4 ports detected [ 2.679090] usb 1-14.4: new full-speed USB device number 5 using xhci_hcd [ 2.781303] usb 1-14.4: New USB device found, idVendor=2548, idProduct=1002, bcdDevice=10.00 [ 2.781307] usb 1-14.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.781309] usb 1-14.4: Product: CEC Adapter [ 2.781310] usb 1-14.4: Manufacturer: Pulse-Eight [ 2.781310] usb 1-14.4: SerialNumber: v12 [ 2.791780] input: Pulse-Eight CEC Adapter as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.4/1-14.4:1.2/0003:2548:1002.0005/input/input8 [ 2.803079] usb 5-1.1: new high-speed USB device number 3 using xhci_hcd [ 2.919568] scsi 7:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 2.965345] usb 5-1.1: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=21.00 [ 2.965347] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.965349] usb 5-1.1: Product: RTL9210 [ 2.965353] usb 5-1.1: Manufacturer: Realtek [ 2.965354] usb 5-1.1: SerialNumber: 012345678906 [ 3.055252] hid-generic 0003:2548:1002.0005: input,hidraw0: USB HID v1.10 Mouse [Pulse-Eight CEC Adapter] on usb-0000:00:14.0-14.4/input2 [ 3.098254] usb-storage 5-1.1:1.0: USB Mass Storage device detected [ 3.098585] scsi host11: usb-storage 5-1.1:1.0 [ 3.231081] usb 5-1.3: new high-speed USB device number 4 using xhci_hcd [ 3.292840] mpt2sas_cm0: hba_port entry: 000000006bffe4e2, port: 255 is added to hba_port list [ 3.294242] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5000000080000000), phys(8) [ 3.389997] usb 5-1.3: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 6.73 [ 3.389999] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.390001] usb 5-1.3: Product: USB2.0 Hub [ 3.390005] usb 5-1.3: Manufacturer: VIA Labs, Inc. [ 3.390006] usb 5-1.3: SerialNumber: 000000001 [ 3.397977] hub 5-1.3:1.0: USB hub found [ 3.398182] hub 5-1.3:1.0: 4 ports detected [ 3.527877] usb 6-1.3.1: new SuperSpeed Plus Gen 2x1 USB device number 5 using xhci_hcd [ 3.559418] usb 6-1.3.1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 4.31 [ 3.559421] usb 6-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.559423] usb 6-1.3.1: Product: VLI Product String [ 3.559424] usb 6-1.3.1: Manufacturer: VLI Manufacture String [ 3.559425] usb 6-1.3.1: SerialNumber: ABCDEFA75257 [ 3.602478] scsi host12: uas [ 3.603319] scsi 12:0:0:0: Direct-Access WDC WD80 EMAZ-00WJTA0 83.H PQ: 0 ANSI: 6 [ 3.683860] usb 6-1.3.2: new SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd [ 3.711424] usb 6-1.3.2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 4.31 [ 3.711427] usb 6-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.711428] usb 6-1.3.2: Product: VLI Product String [ 3.711429] usb 6-1.3.2: Manufacturer: VLI Manufacture String [ 3.711430] usb 6-1.3.2: SerialNumber: ABCDEFA75258 [ 3.758026] scsi host13: uas [ 3.758995] scsi 13:0:0:0: Direct-Access ST8000AS 0002-1NA17Z AR17 PQ: 0 ANSI: 6 [ 3.792662] scsi 0:0:0:0: Direct-Access ATA WDC WD140EDFZ-11 0A81 PQ: 0 ANSI: 6 [ 3.792666] scsi 0:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x0000000000000000) [ 3.792668] scsi 0:0:0:0: enclosure logical id (0x5000000080000000), slot(3) [ 3.792807] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 3.792810] scsi 0:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 3.793654] end_device-0:0: add: handle(0x0009), sas_addr(0x4433221100000000) [ 4.042710] scsi 0:0:1:0: Direct-Access ATA WDC WD80EMAZ-00W 0A83 PQ: 0 ANSI: 6 [ 4.042714] scsi 0:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x0000000000000000) [ 4.042715] scsi 0:0:1:0: enclosure logical id (0x5000000080000000), slot(2) [ 4.042866] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 4.042869] scsi 0:0:1:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 4.043764] end_device-0:1: add: handle(0x000a), sas_addr(0x4433221101000000) [ 4.113185] scsi 11:0:0:0: Direct-Access Samsung SSD 980 1TB FXO7 PQ: 0 ANSI: 6 [ 4.292708] scsi 0:0:2:0: Direct-Access ATA WDC WD80EFZX-68U 0A83 PQ: 0 ANSI: 6 [ 4.292712] scsi 0:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x0000000000000000) [ 4.292714] scsi 0:0:2:0: enclosure logical id (0x5000000080000000), slot(1) [ 4.292838] scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 4.292840] scsi 0:0:2:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 4.293699] end_device-0:2: add: handle(0x000b), sas_addr(0x4433221102000000) [ 4.355967] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2 [ 4.477367] input: Logitech Wireless Device PID:406b Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0003/0003:046D:406B.0006/input/input9 [ 4.477433] input: Logitech Wireless Device PID:406b Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0003/0003:046D:406B.0006/input/input10 [ 4.477515] hid-generic 0003:046D:406B.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406b] on usb-0000:00:14.0-10/input2:1 [ 4.479342] input: Logitech Wireless Device PID:405b Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0003/0003:046D:405B.0007/input/input14 [ 4.479457] hid-generic 0003:046D:405B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:405b] on usb-0000:00:14.0-10/input2:2 [ 4.543007] scsi 0:0:3:0: Direct-Access ATA WDC WD80EFZX-68U 0A83 PQ: 0 ANSI: 6 [ 4.543013] scsi 0:0:3:0: SATA: handle(0x000c), sas_addr(0x4433221103000000), phy(3), device_name(0x0000000000000000) [ 4.543014] scsi 0:0:3:0: enclosure logical id (0x5000000080000000), slot(0) [ 4.543130] scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 4.543133] scsi 0:0:3:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 4.544017] end_device-0:3: add: handle(0x000c), sas_addr(0x4433221103000000) [ 4.792707] scsi 0:0:4:0: Direct-Access ATA WDC WD140EDFZ-11 0A81 PQ: 0 ANSI: 6 [ 4.792711] scsi 0:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221105000000), phy(5), device_name(0x0000000000000000) [ 4.792713] scsi 0:0:4:0: enclosure logical id (0x5000000080000000), slot(6) [ 4.792847] scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 4.792849] scsi 0:0:4:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 4.793699] end_device-0:4: add: handle(0x000d), sas_addr(0x4433221105000000) [ 5.042743] scsi 0:0:5:0: Direct-Access ATA WDC WD100EMAZ-00 0A83 PQ: 0 ANSI: 6 [ 5.042747] scsi 0:0:5:0: SATA: handle(0x000e), sas_addr(0x4433221104000000), phy(4), device_name(0x0000000000000000) [ 5.042748] scsi 0:0:5:0: enclosure logical id (0x5000000080000000), slot(7) [ 5.042885] scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.042888] scsi 0:0:5:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 5.043716] end_device-0:5: add: handle(0x000e), sas_addr(0x4433221104000000) [ 5.265152] input: Logitech M585/M590 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0003/0003:046D:406B.0006/input/input18 [ 5.265302] logitech-hidpp-device 0003:046D:406B.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech M585/M590] on usb-0000:00:14.0-10/input2:1 [ 5.292732] scsi 0:0:6:0: Direct-Access ATA WDC WD80EFAX-68L 0A83 PQ: 0 ANSI: 6 [ 5.292736] scsi 0:0:6:0: SATA: handle(0x000f), sas_addr(0x4433221106000000), phy(6), device_name(0x0000000000000000) [ 5.292738] scsi 0:0:6:0: enclosure logical id (0x5000000080000000), slot(5) [ 5.292890] scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.292892] scsi 0:0:6:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 5.293738] end_device-0:6: add: handle(0x000f), sas_addr(0x4433221106000000) [ 5.543278] scsi 0:0:7:0: Direct-Access ATA WDC WD80EFAX-68L 0A83 PQ: 0 ANSI: 6 [ 5.543283] scsi 0:0:7:0: SATA: handle(0x0010), sas_addr(0x4433221107000000), phy(7), device_name(0x0000000000000000) [ 5.543284] scsi 0:0:7:0: enclosure logical id (0x5000000080000000), slot(4) [ 5.543423] scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.543426] scsi 0:0:7:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 5.544238] end_device-0:7: add: handle(0x0010), sas_addr(0x4433221107000000) [ 5.881067] logitech-hidpp-device 0003:046D:405B.0007: HID++ 4.5 device connected. [ 6.261237] input: Logitech K780 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0003/0003:046D:405B.0007/input/input19 [ 6.261367] logitech-hidpp-device 0003:046D:405B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K780] on usb-0000:00:14.0-10/input2:2 [ 8.327147] mlx4_core 0000:06:00.0: DMFS high rate steer mode is: disabled performance optimized steering [ 8.327469] mlx4_core 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:1b.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 8.367423] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0 [ 8.367567] mlx4_en 0000:06:00.0: Activating port:1 [ 8.369834] mlx4_en: 0000:06:00.0: Port 1: Using 4 TX rings [ 8.369838] mlx4_en: 0000:06:00.0: Port 1: Using 4 RX rings [ 8.370143] mlx4_en: 0000:06:00.0: Port 1: Initializing port [ 8.370572] mlx4_en 0000:06:00.0: registered PHC clock [ 8.371980] mlx4_core 0000:06:00.0 enp6s0: renamed from eth0 [ 8.374683] mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0 [ 8.377310] mlx4_ib_add: counter index 1 for port 1 allocated 1 [ 8.431147] mpt2sas_cm0: port enable: SUCCESS [ 8.431453] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.431508] sd 0:0:0:0: Power-on or device reset occurred [ 8.431670] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 8.431678] sd 0:0:1:0: Power-on or device reset occurred [ 8.431812] sd 0:0:2:0: Attached scsi generic sg2 type 0 [ 8.431863] sd 0:0:2:0: Power-on or device reset occurred [ 8.432015] sd 0:0:3:0: Attached scsi generic sg3 type 0 [ 8.432049] sd 0:0:3:0: Power-on or device reset occurred [ 8.432209] sd 0:0:4:0: Attached scsi generic sg4 type 0 [ 8.432246] sd 0:0:4:0: Power-on or device reset occurred [ 8.432389] sd 0:0:5:0: Attached scsi generic sg5 type 0 [ 8.432420] sd 0:0:0:0: [sda] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB) [ 8.432424] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 8.432440] sd 0:0:5:0: Power-on or device reset occurred [ 8.432577] sd 0:0:6:0: Attached scsi generic sg6 type 0 [ 8.432633] sd 0:0:6:0: Power-on or device reset occurred [ 8.432713] sd 0:0:1:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 8.432717] sd 0:0:1:0: [sdb] 4096-byte physical blocks [ 8.432795] sd 0:0:7:0: Attached scsi generic sg7 type 0 [ 8.432806] sd 0:0:2:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 8.432809] sd 0:0:2:0: [sdc] 4096-byte physical blocks [ 8.432822] sd 0:0:7:0: Power-on or device reset occurred [ 8.432958] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 4B6Q PQ: 0 ANSI: 5 [ 8.433041] sd 8:0:0:0: Attached scsi generic sg8 type 0 [ 8.433073] sd 0:0:3:0: [sdd] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 8.433077] sd 0:0:3:0: [sdd] 4096-byte physical blocks [ 8.433210] sd 1:0:0:0: Attached scsi generic sg9 type 0 [ 8.433228] sd 0:0:4:0: [sde] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB) [ 8.433232] sd 0:0:4:0: [sde] 4096-byte physical blocks [ 8.433265] sd 9:0:0:0: Attached scsi generic sg10 type 0 [ 8.433293] scsi: waiting for bus probes to complete ... [ 8.433337] sd 1:0:0:0: [sdj] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 8.433351] sd 1:0:0:0: [sdj] Write Protect is off [ 8.433354] sd 1:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 8.433372] sd 1:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.433472] sd 10:0:0:0: Attached scsi generic sg11 type 0 [ 8.433540] sd 0:0:5:0: [sdf] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 8.433543] sd 0:0:5:0: [sdf] 4096-byte physical blocks [ 8.433659] sd 7:0:0:0: Attached scsi generic sg12 type 0 [ 8.433828] sd 0:0:6:0: [sdg] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 8.433831] sd 0:0:6:0: [sdg] 4096-byte physical blocks [ 8.433842] sd 12:0:0:0: Attached scsi generic sg13 type 0 [ 8.433901] sd 7:0:0:0: [sdm] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 8.434064] sd 13:0:0:0: Attached scsi generic sg14 type 0 [ 8.434295] sd 7:0:0:0: [sdm] Write Protect is off [ 8.434298] sd 7:0:0:0: [sdm] Mode Sense: 43 00 00 00 [ 8.434314] sd 11:0:0:0: Attached scsi generic sg15 type 0 [ 8.434356] sd 10:0:0:0: [sdl] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 8.434359] sd 10:0:0:0: [sdl] 4096-byte physical blocks [ 8.434426] sd 0:0:7:0: [sdh] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 8.434428] sd 0:0:7:0: [sdh] 4096-byte physical blocks [ 8.434476] sd 10:0:0:0: [sdl] Write Protect is off [ 8.434480] sd 10:0:0:0: [sdl] Mode Sense: 2f 00 00 00 [ 8.434511] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 8.434685] sd 7:0:0:0: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.434691] sd 2:0:0:0: Attached scsi generic sg16 type 0 [ 8.434792] sd 2:0:0:0: [sdq] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 8.434798] sd 10:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.434807] sd 2:0:0:0: [sdq] Write Protect is off [ 8.434809] sd 2:0:0:0: [sdq] Mode Sense: 00 3a 00 00 [ 8.434816] sd 12:0:0:0: [sdn] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 8.434820] sd 12:0:0:0: [sdn] 4096-byte physical blocks [ 8.434825] sd 2:0:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.434931] sd 12:0:0:0: [sdn] Write Protect is off [ 8.434935] sd 12:0:0:0: [sdn] Mode Sense: 2f 00 00 00 [ 8.435008] sd 13:0:0:0: [sdo] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 8.435011] sd 13:0:0:0: [sdo] 4096-byte physical blocks [ 8.435116] sd 13:0:0:0: [sdo] Write Protect is off [ 8.435120] sd 13:0:0:0: [sdo] Mode Sense: 2f 00 00 00 [ 8.435148] sd 12:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.435228] sd 0:0:0:0: [sda] Write Protect is off [ 8.435246] sd 0:0:0:0: [sda] Mode Sense: 7f 00 10 08 [ 8.435329] sd 13:0:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.435544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.435631] sd 10:0:0:0: [sdl] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 8.436057] sd 12:0:0:0: [sdn] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 8.436064] sd 0:0:4:0: [sde] Write Protect is off [ 8.436067] sd 0:0:4:0: [sde] Mode Sense: 7f 00 10 08 [ 8.436133] sd 0:0:1:0: [sdb] Write Protect is off [ 8.436136] sd 0:0:1:0: [sdb] Mode Sense: 7f 00 10 08 [ 8.436299] sd 0:0:5:0: [sdf] Write Protect is off [ 8.436303] sd 0:0:5:0: [sdf] Mode Sense: 7f 00 10 08 [ 8.436334] sd 13:0:0:0: [sdo] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 8.436372] sd 0:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.436521] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.436587] sd 0:0:3:0: [sdd] Write Protect is off [ 8.436591] sd 0:0:3:0: [sdd] Mode Sense: 7f 00 10 08 [ 8.436618] sd 0:0:2:0: [sdc] Write Protect is off [ 8.436621] sd 0:0:2:0: [sdc] Mode Sense: 7f 00 10 08 [ 8.436647] sd 0:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.436696] sd 0:0:6:0: [sdg] Write Protect is off [ 8.436700] sd 0:0:6:0: [sdg] Mode Sense: 7f 00 10 08 [ 8.436938] sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.436954] sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.437046] sd 0:0:6:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.437207] sd 0:0:7:0: [sdh] Write Protect is off [ 8.437211] sd 0:0:7:0: [sdh] Mode Sense: 7f 00 10 08 [ 8.437524] sd 0:0:7:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.446042] sd 11:0:0:0: [sdp] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 8.447561] sd 11:0:0:0: [sdp] Write Protect is off [ 8.447568] sd 11:0:0:0: [sdp] Mode Sense: 37 00 00 08 [ 8.449121] sd 11:0:0:0: [sdp] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.449692] sd 8:0:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 8.451009] sd 9:0:0:0: [sdk] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 8.452317] sd 8:0:0:0: [sdi] Write Protect is off [ 8.452322] sd 8:0:0:0: [sdi] Mode Sense: 37 00 00 08 [ 8.453651] sd 9:0:0:0: [sdk] Write Protect is off [ 8.453657] sd 9:0:0:0: [sdk] Mode Sense: 37 00 00 08 [ 8.457368] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.458427] sdq: sdq1 sdq9 [ 8.458821] sd 9:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.458848] sdj: sdj1 sdj9 [ 8.461562] sd 8:0:0:0: [sdi] Optimal transfer size 33553920 bytes [ 8.463136] sd 9:0:0:0: [sdk] Optimal transfer size 33553920 bytes [ 8.470100] sdm: sdm1 [ 8.471787] sd 7:0:0:0: [sdm] Attached SCSI removable disk [ 8.483701] sd 2:0:0:0: [sdq] supports TCG Opal [ 8.483713] sd 2:0:0:0: [sdq] Attached SCSI disk [ 8.487471] sd 1:0:0:0: [sdj] supports TCG Opal [ 8.487479] sd 1:0:0:0: [sdj] Attached SCSI disk [ 8.503765] sdp: sdp1 [ 8.512640] sde: sde1 sde9 [ 8.517915] sdi: sdi1 sdi2 [ 8.518627] sd 11:0:0:0: [sdp] Attached SCSI disk [ 8.524924] sdk: sdk1 [ 8.527291] sdb: sdb1 sdb9 [ 8.529042] sdd: sdd1 sdd9 [ 8.535494] sda: sda1 sda9 [ 8.538353] sdh: sdh1 sdh9 [ 8.538798] sdc: sdc1 sdc9 [ 8.538918] sd 0:0:4:0: [sde] Attached SCSI disk [ 8.543082] sdg: sdg1 sdg9 [ 8.545510] sdf: sdf1 sdf9 [ 8.552731] sd 8:0:0:0: [sdi] Attached SCSI disk [ 8.554305] sd 9:0:0:0: [sdk] Attached SCSI disk [ 8.562634] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.562910] sd 0:0:1:0: [sdb] Attached SCSI disk [ 8.563462] sd 0:0:3:0: [sdd] Attached SCSI disk [ 8.570595] sd 0:0:6:0: [sdg] Attached SCSI disk [ 8.571869] sd 0:0:2:0: [sdc] Attached SCSI disk [ 8.574559] sd 0:0:7:0: [sdh] Attached SCSI disk [ 8.574647] sd 0:0:5:0: [sdf] Attached SCSI disk [ 10.600563] mlx4_en: enp6s0: Link Up [ 15.726688] sdn: sdn1 sdn9 [ 15.728907] sd 12:0:0:0: [sdn] Attached SCSI disk [ 15.923299] sdl: sdl1 sdl9 [ 15.925761] sd 10:0:0:0: [sdl] Attached SCSI disk [ 17.403789] sdo: [ 17.405866] sd 13:0:0:0: [sdo] Attached SCSI disk [ 17.999089] raid6: avx2x4 gen() 36316 MB/s [ 18.067086] raid6: avx2x4 xor() 18739 MB/s [ 18.135086] raid6: avx2x2 gen() 38287 MB/s [ 18.203087] raid6: avx2x2 xor() 22874 MB/s [ 18.271088] raid6: avx2x1 gen() 25682 MB/s [ 18.339087] raid6: avx2x1 xor() 18218 MB/s [ 18.407086] raid6: sse2x4 gen() 15308 MB/s [ 18.475090] raid6: sse2x4 xor() 8993 MB/s [ 18.543087] raid6: sse2x2 gen() 15526 MB/s [ 18.611085] raid6: sse2x2 xor() 9510 MB/s [ 18.679086] raid6: sse2x1 gen() 13114 MB/s [ 18.747091] raid6: sse2x1 xor() 6465 MB/s [ 18.747091] raid6: using algorithm avx2x2 gen() 38287 MB/s [ 18.747092] raid6: .... xor() 22874 MB/s, rmw enabled [ 18.747093] raid6: using avx2x2 recovery algorithm [ 18.747868] xor: automatically using best checksumming function avx [ 18.748550] async_tx: api initialized (async) [ 19.016569] spl: loading out-of-tree module taints kernel. [ 19.016767] spl: module verification failed: signature and/or required key missing - tainting kernel [ 19.023784] znvpair: module license 'CDDL' taints kernel. [ 19.023790] Disabling lock debugging due to kernel taint [ 19.170351] ZFS: Loaded module v2.1.1-satadru~21.04, ZFS pool version 5000, ZFS filesystem version 5 [ 20.623267] systemd[1]: Inserted module 'autofs4' [ 20.698188] systemd[1]: systemd 248.3-1ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 20.719181] systemd[1]: Detected architecture x86-64. [ 21.060695] systemd[1]: /etc/systemd/system/smbd.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 21.114056] systemd[1]: Queued start job for default target Graphical Interface. [ 21.124285] systemd[1]: Created slice Virtual Machine and Container Slice. [ 21.124557] systemd[1]: Created slice session.slice. [ 21.125086] systemd[1]: Created slice system-modprobe.slice. [ 21.125426] systemd[1]: Created slice system-postfix.slice. [ 21.125701] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 21.125973] systemd[1]: Created slice system-wg\x2dquick.slice. [ 21.126206] systemd[1]: Created slice User and Session Slice. [ 21.126266] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 21.126393] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 21.126471] systemd[1]: Reached target Slices. [ 21.126494] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 21.126504] systemd[1]: Reached target Libvirt guests shutdown. [ 21.126601] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 21.126695] systemd[1]: Listening on LVM2 poll daemon socket. [ 21.126922] systemd[1]: Listening on Syslog Socket. [ 21.127102] systemd[1]: Listening on fsck to fsckd communication Socket. [ 21.127135] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 21.127258] systemd[1]: Listening on Journal Audit Socket. [ 21.127310] systemd[1]: Listening on Journal Socket (/dev/log). [ 21.127381] systemd[1]: Listening on Journal Socket. [ 21.127502] systemd[1]: Listening on udev Control Socket. [ 21.127560] systemd[1]: Listening on udev Kernel Socket. [ 21.128215] systemd[1]: Mounting Huge Pages File System... [ 21.128866] systemd[1]: Mounting POSIX Message Queue File System... [ 21.129668] systemd[1]: Mounting NFSD configuration filesystem... [ 21.130707] systemd[1]: Mounting RPC Pipe File System... [ 21.131851] systemd[1]: Mounting Kernel Debug File System... [ 21.132811] systemd[1]: Mounting Kernel Trace File System... [ 21.134527] systemd[1]: Starting Journal Service... [ 21.134687] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 21.134886] systemd[1]: Finished Availability of block devices. [ 21.136639] systemd[1]: Starting Set the console keyboard layout... [ 21.137755] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 21.138760] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 21.139726] systemd[1]: Starting Load Kernel Module configfs... [ 21.140517] systemd[1]: Starting Load Kernel Module drm... [ 21.141294] systemd[1]: Starting Load Kernel Module fuse... [ 21.141800] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 21.143954] systemd[1]: Starting Load Kernel Modules... [ 21.145199] systemd[1]: Starting Remount Root and Kernel File Systems... [ 21.146621] systemd[1]: Starting Coldplug All udev Devices... [ 21.148843] systemd[1]: Starting Uncomplicated firewall... [ 21.150616] systemd[1]: Mounted Huge Pages File System. [ 21.152109] systemd[1]: Mounted POSIX Message Queue File System. [ 21.152263] systemd[1]: Mounted Kernel Debug File System. [ 21.152392] systemd[1]: Mounted Kernel Trace File System. [ 21.152963] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 21.153231] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 21.153591] systemd[1]: Finished Load Kernel Module configfs. [ 21.153843] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 21.154147] systemd[1]: Finished Load Kernel Module fuse. [ 21.154691] systemd[1]: Finished Remount Root and Kernel File Systems. [ 21.155872] systemd[1]: Mounting FUSE Control File System... [ 21.157598] systemd[1]: Mounting Kernel Configuration File System... [ 21.157859] RPC: Registered named UNIX socket transport module. [ 21.157861] RPC: Registered udp transport module. [ 21.157861] RPC: Registered tcp transport module. [ 21.157862] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.159270] systemd[1]: Starting Initial Check File System Quotas... [ 21.162012] ashmem_linux: module is from the staging directory, the quality is unknown, you have been warned. [ 21.162231] ashmem: initialized [ 21.163351] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 21.163427] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 21.170923] systemd[1]: Starting Load/Save Random Seed... [ 21.172345] systemd[1]: Starting Create System Users... [ 21.173521] systemd[1]: Mounted RPC Pipe File System. [ 21.174473] systemd[1]: Finished Uncomplicated firewall. [ 21.182576] systemd[1]: Mounted FUSE Control File System. [ 21.182724] systemd[1]: Mounted Kernel Configuration File System. [ 21.185948] lp: driver loaded but no devices found [ 21.191910] systemd[1]: Starting pNFS block layout mapping daemon... [ 21.192285] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 21.192631] systemd[1]: Finished Load Kernel Module drm. [ 21.192852] ppdev: user-space parallel port driver [ 21.195109] parport_pc 00:01: reported by Plug and Play ACPI [ 21.195193] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 21.197515] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.199038] systemd[1]: Mounted NFSD configuration filesystem. [ 21.202551] systemd[1]: Started pNFS block layout mapping daemon. [ 21.207376] systemd[1]: Finished Create System Users. [ 21.208850] systemd[1]: Starting Create Static Device Nodes in /dev... [ 21.212517] systemd[1]: Finished Load/Save Random Seed. [ 21.212686] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 21.226019] systemd[1]: Finished Create Static Device Nodes in /dev. [ 21.227827] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 21.231981] systemd[1]: Finished Initial Check File System Quotas. [ 21.257005] systemd[1]: Finished Set the console keyboard layout. [ 21.283428] lp0: using parport0 (interrupt-driven). [ 21.285268] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 21.285400] systemd[1]: Reached target Local File Systems (Pre). [ 21.286950] systemd[1]: Mounting /home/kimberlyrkahn... [ 21.288148] systemd[1]: Mounting /home/kodi... [ 21.289657] systemd[1]: Mounting /home/nzb... [ 21.290641] systemd[1]: Mounting /home/satadru... [ 21.291636] systemd[1]: Mounting /root... [ 21.293291] systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 145... [ 21.294527] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1514... [ 21.295658] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1515... [ 21.297084] systemd[1]: Mounting /var/lib/docker.old... [ 21.297145] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped. [ 21.297188] systemd[1]: Reached target Containers. [ 21.303134] loop0: detected capacity change from 0 to 133320 [ 21.312078] systemd[1]: Mounted /home/kimberlyrkahn. [ 21.313500] systemd[1]: Started Journal Service. [ 21.321325] systemd-journald[1247]: Received client request to flush runtime journal. [ 21.322022] nct6775: Found NCT6793D or compatible chip at 0x4e:0xa20 [ 21.327790] loop1: detected capacity change from 0 to 333552 [ 21.336825] loop2: detected capacity change from 0 to 132648 [ 21.610053] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 21.686678] cdc_acm 1-14.4:1.0: ttyACM0: USB ACM device [ 21.686747] usbcore: registered new interface driver cdc_acm [ 21.686748] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 21.885566] snd_hda_intel 0000:00:1f.3: Applying patch firmware 'hda-jack-retask.fw' [ 21.885793] snd_hda_intel 0000:03:00.1: Force to non-snoop mode [ 21.885798] snd_hda_intel 0000:03:00.1: Applying patch firmware 'hda-jack-retask.fw' [ 21.915972] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input20 [ 21.916024] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input21 [ 21.916069] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input22 [ 21.916119] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input23 [ 21.916171] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input24 [ 21.916219] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input25 [ 21.920368] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 21.920638] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 21.920642] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.920645] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.920646] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 21.920648] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 21.920649] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 21.927824] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 21.928801] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only [ 21.929025] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only [ 21.930527] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 21.930573] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 21.930616] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 21.930655] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 21.930698] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 21.986540] pstore: Using crash dump compression: deflate [ 21.986550] pstore: Registered efi as persistent store backend [ 22.015046] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 22.015050] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 22.015051] RAPL PMU: hw unit of domain package 2^-14 Joules [ 22.015052] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 22.063100] intel_tcc_cooling: Programmable TCC Offset detected [ 22.175099] Adding 2097148k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:2097148k SSDscFS [ 22.247541] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 22.276180] XFS (sdk1): Mounting V5 Filesystem [ 22.298835] XFS (sdk1): Ending clean mount [ 22.301335] xfs filesystem being mounted at /var/lib/docker.tmp supports timestamps until 2038 (0x7fffffff) [ 22.465991] intel_rapl_common: Found RAPL domain package [ 22.465995] intel_rapl_common: Found RAPL domain core [ 22.465997] intel_rapl_common: Found RAPL domain dram [ 22.507573] XFS (sdp1): Mounting V5 Filesystem [ 22.624464] XFS (sdp1): Ending clean mount [ 22.627166] xfs filesystem being mounted at /var/lib/docker supports timestamps until 2038 (0x7fffffff) [ 38.243655] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro. Quota mode: none. [ 38.416115] loop3: detected capacity change from 0 to 290680 [ 38.434738] loop4: detected capacity change from 0 to 203648 [ 38.459217] loop5: detected capacity change from 0 to 292312 [ 38.479796] loop6: detected capacity change from 0 to 203648 [ 38.480542] loop7: detected capacity change from 0 to 126584 [ 38.499007] loop8: detected capacity change from 0 to 113544 [ 38.544616] loop9: detected capacity change from 0 to 82488 [ 38.584756] loop10: detected capacity change from 0 to 496176 [ 38.632198] loop11: detected capacity change from 0 to 82488 [ 38.656361] loop12: detected capacity change from 0 to 444280 [ 38.705194] loop13: detected capacity change from 0 to 113536 [ 38.784332] loop14: detected capacity change from 0 to 337424 [ 38.850423] loop15: detected capacity change from 0 to 126584 [ 38.900103] loop16: detected capacity change from 0 to 437880 [ 38.952152] loop17: detected capacity change from 0 to 526504 [ 39.115466] audit: type=1400 audit(1631122233.111:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=6843 comm="apparmor_parser" [ 39.151028] audit: type=1400 audit(1631122233.143:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=6844 comm="apparmor_parser" [ 39.152483] audit: type=1400 audit(1631122233.147:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=6844 comm="apparmor_parser" [ 39.307945] audit: type=1400 audit(1631122233.303:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=6876 comm="apparmor_parser" [ 39.308890] audit: type=1400 audit(1631122233.303:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=6876 comm="apparmor_parser" [ 39.310268] audit: type=1400 audit(1631122233.303:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=6876 comm="apparmor_parser" [ 39.330135] audit: type=1400 audit(1631122233.323:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=6846 comm="apparmor_parser" [ 39.331184] audit: type=1400 audit(1631122233.327:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=6846 comm="apparmor_parser" [ 39.332734] audit: type=1400 audit(1631122233.327:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=6846 comm="apparmor_parser" [ 39.335939] audit: type=1400 audit(1631122233.331:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=6846 comm="apparmor_parser" [ 44.792906] kauditd_printk_skb: 21 callbacks suppressed [ 44.792909] audit: type=1400 audit(1631122238.787:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=6885 comm="apparmor_parser" [ 44.794281] audit: type=1400 audit(1631122238.787:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=6885 comm="apparmor_parser" [ 45.445849] audit: type=1400 audit(1631122239.439:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13316/usr/lib/snapd/snap-confine" pid=7174 comm="apparmor_parser" [ 45.446983] audit: type=1400 audit(1631122239.439:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13316/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7174 comm="apparmor_parser" [ 45.447794] audit: type=1400 audit(1631122239.443:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13303/usr/lib/snapd/snap-confine" pid=7173 comm="apparmor_parser" [ 45.448964] audit: type=1400 audit(1631122239.443:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13303/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7173 comm="apparmor_parser" [ 45.463548] audit: type=1400 audit(1631122239.459:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.code" pid=7177 comm="apparmor_parser" [ 45.467543] audit: type=1400 audit(1631122239.463:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=7178 comm="apparmor_parser" [ 45.481134] audit: type=1400 audit(1631122239.475:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/11824/usr/lib/snapd/snap-confine" pid=7172 comm="apparmor_parser" [ 45.482364] audit: type=1400 audit(1631122239.475:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/11824/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=7172 comm="apparmor_parser" [ 47.406576] process '/nzbget/nzbget' started with executable stack [ 48.225026] mlx4_en: enp6s0: Steering Mode 1 [ 48.234896] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 48.823087] loop18: detected capacity change from 0 to 8 [ 49.796372] kauditd_printk_skb: 23 callbacks suppressed [ 49.796374] audit: type=1400 audit(1631122243.791:66): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.chromium.hook.configure" pid=8570 comm="apparmor_parser" [ 49.797077] audit: type=1400 audit(1631122243.791:67): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8575 comm="apparmor_parser" [ 49.801199] audit: type=1400 audit(1631122243.795:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.zoom-client" pid=8576 comm="apparmor_parser" [ 49.805397] audit: type=1400 audit(1631122243.799:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.zoom-client.hook.configure" pid=8577 comm="apparmor_parser" [ 49.817168] audit: type=1400 audit(1631122243.811:70): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.zoom-client.zoom-client" pid=8578 comm="apparmor_parser" [ 53.972506] loop18: detected capacity change from 0 to 82488 [ 54.382785] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 54.382788] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 54.672113] audit: type=1400 audit(1631122248.667:71): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=9490 comm="apparmor_parser" [ 54.781199] audit: type=1400 audit(1631122248.775:72): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=9061 comm="cups-browsed" capability=23 capname="sys_nice" [ 54.806210] audit: type=1400 audit(1631122248.799:73): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13323/usr/lib/snapd/snap-confine" pid=9060 comm="apparmor_parser" [ 54.807047] audit: type=1400 audit(1631122248.799:74): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13323/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=9060 comm="apparmor_parser" [ 54.891811] Bridge firewalling registered [ 54.994258] Initializing XFRM netlink socket [ 55.289242] docker0: port 1(veth81b794b) entered blocking state [ 55.289246] docker0: port 1(veth81b794b) entered disabled state [ 55.289345] device veth81b794b entered promiscuous mode [ 55.289580] docker0: port 1(veth81b794b) entered blocking state [ 55.289583] docker0: port 1(veth81b794b) entered forwarding state [ 55.290018] docker0: port 1(veth81b794b) entered disabled state [ 55.312171] docker0: port 2(veth2af41a3) entered blocking state [ 55.312176] docker0: port 2(veth2af41a3) entered disabled state [ 55.312331] device veth2af41a3 entered promiscuous mode [ 55.312787] docker0: port 2(veth2af41a3) entered blocking state [ 55.312790] docker0: port 2(veth2af41a3) entered forwarding state [ 55.312810] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 55.312880] docker0: port 2(veth2af41a3) entered disabled state [ 55.380048] NFSD: Using UMH upcall client tracking operations. [ 55.380052] NFSD: starting 90-second grace period (net f0000098) [ 55.459101] nfsd: last server has exited, flushing export cache [ 55.714913] audit: type=1400 audit(1631122249.707:75): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.chromium" pid=9550 comm="apparmor_parser" [ 55.753675] audit: type=1400 audit(1631122249.747:76): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.chromium.chromium" pid=10086 comm="apparmor_parser" [ 55.766624] audit: type=1400 audit(1631122249.759:77): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.chromium.hook.configure" pid=10088 comm="apparmor_parser" [ 55.773402] audit: type=1400 audit(1631122249.767:78): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.zoom-client" pid=10089 comm="apparmor_parser" [ 55.785152] audit: type=1400 audit(1631122249.779:79): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.zoom-client.hook.configure" pid=10092 comm="apparmor_parser" [ 55.787292] audit: type=1400 audit(1631122249.783:80): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.chromium.chromedriver" pid=10085 comm="apparmor_parser" [ 55.813984] audit: type=1400 audit(1631122249.807:81): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.zoom-client.zoom-client" pid=10099 comm="apparmor_parser" [ 55.956858] eth0: renamed from veth64b825b [ 56.065516] eth0: renamed from veth54b806c [ 56.142902] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 56.142931] IPv6: ADDRCONF(NETDEV_CHANGE): veth81b794b: link becomes ready [ 56.142968] docker0: port 1(veth81b794b) entered blocking state [ 56.142971] docker0: port 1(veth81b794b) entered forwarding state [ 56.258758] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 56.258787] IPv6: ADDRCONF(NETDEV_CHANGE): veth2af41a3: link becomes ready [ 56.258827] docker0: port 2(veth2af41a3) entered blocking state [ 56.258830] docker0: port 2(veth2af41a3) entered forwarding state [ 56.600580] NFSD: Using UMH upcall client tracking operations. [ 56.600584] NFSD: starting 90-second grace period (net f0000098) [ 56.679116] ahci 0000:00:17.0: port does not support device sleep [ 56.711131] ahci 0000:00:17.0: port does not support device sleep [ 58.435388] loop19: detected capacity change from 0 to 8 [ 58.653678] audit: type=1400 audit(1631122252.647:82): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/11824/usr/lib/snapd/snap-confine" pid=11382 comm="apparmor_parser" [ 67.552888] fbcon: Taking over console [ 67.553300] Console: switching to colour frame buffer device 240x67 [ 107.589004] docker0: port 3(vethf06026e) entered blocking state [ 107.589008] docker0: port 3(vethf06026e) entered disabled state [ 107.589064] device vethf06026e entered promiscuous mode [ 107.734375] eth0: renamed from veth6bec832 [ 107.784197] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 107.784215] IPv6: ADDRCONF(NETDEV_CHANGE): vethf06026e: link becomes ready [ 107.784260] docker0: port 3(vethf06026e) entered blocking state [ 107.784262] docker0: port 3(vethf06026e) entered forwarding state [ 108.008113] docker0: port 3(vethf06026e) entered disabled state [ 108.008169] veth6bec832: renamed from eth0 [ 108.081375] docker0: port 3(vethf06026e) entered disabled state [ 108.082896] device vethf06026e left promiscuous mode [ 108.082901] docker0: port 3(vethf06026e) entered disabled state [ 257.750953] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 257.750957] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 257.824661] [drm] amdgpu kernel modesetting enabled. [ 257.824759] amdgpu: CRAT table not found [ 257.824763] amdgpu: Virtual CRAT table created for CPU [ 257.824777] amdgpu: Topology: Add CPU node [ 257.824862] checking generic (c0000000 7e9000) vs hw (c0000000 10000000) [ 257.824864] fb0: switching to amdgpudrmfb from EFI VGA [ 257.825091] Console: switching to colour dummy device 80x25 [ 257.825109] amdgpu 0000:03:00.0: vgaarb: deactivate vga console [ 257.825299] [drm] initializing kernel modesetting (NAVI14 0x1002:0x7340 0x1462:0x3822 0xC5). [ 257.825304] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [ 257.825319] [drm] register mmio base: 0xDF900000 [ 257.825320] [drm] register mmio size: 524288 [ 257.826180] [drm] add ip block number 0 [ 257.826182] [drm] add ip block number 1 [ 257.826183] [drm] add ip block number 2 [ 257.826183] [drm] add ip block number 3 [ 257.826184] [drm] add ip block number 4 [ 257.826185] [drm] add ip block number 5 [ 257.826186] [drm] add ip block number 6 [ 257.826186] [drm] add ip block number 7 [ 257.826187] [drm] add ip block number 8 [ 257.826188] [drm] add ip block number 9 [ 257.826202] amdgpu 0000:03:00.0: No more image in the PCI ROM [ 257.826216] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 257.826217] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 257.826225] [drm] VCN decode is enabled in VM mode [ 257.826225] [drm] VCN encode is enabled in VM mode [ 257.826226] [drm] JPEG decode is enabled in VM mode [ 257.826250] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 257.826255] amdgpu 0000:03:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) [ 257.826257] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 257.826258] amdgpu 0000:03:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF [ 257.826265] [drm] Detected VRAM RAM=8176M, BAR=256M [ 257.826265] [drm] RAM width 128bits GDDR6 [ 257.826295] [drm] amdgpu: 8176M of VRAM memory ready [ 257.826298] [drm] amdgpu: 8176M of GTT memory ready. [ 257.826299] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 257.826365] [drm] PCIE GART of 512M enabled (table at 0x00000080007E9000). [ 257.834122] [drm] Found VCN firmware Version ENC: 1.14 DEC: 5 VEP: 0 Revision: 20 [ 257.834129] [drm] PSP loading VCN firmware [ 258.003897] [drm] reserve 0x900000 from 0x81fe400000 for PSP TMR [ 258.043689] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 258.047941] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 258.047944] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 258.048003] amdgpu 0000:03:00.0: amdgpu: use vbios provided pptable [ 258.048005] amdgpu 0000:03:00.0: amdgpu: smc_dpm_info table revision(format.content): 4.5 [ 258.079347] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully! [ 258.079501] [drm] Display Core initialized with v3.2.132! [ 258.097697] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 258.100833] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "HDMI-A-1" [ 258.102568] [drm] kiq ring mec 2 pipe 1 q 0 [ 258.103913] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 258.104033] [drm] JPEG decode initialized successfully. [ 258.105101] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 258.105221] amdgpu: Virtual CRAT table created for GPU [ 258.105289] amdgpu: Topology: Add dGPU node [0x7340:0x1002] [ 258.105291] kfd kfd: amdgpu: added device 1002:7340 [ 258.105294] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 12, active_cu_number 22 [ 258.106126] [drm] fb mappable at 0xC09F3000 [ 258.106127] [drm] vram apper at 0xC0000000 [ 258.106128] [drm] size 8294400 [ 258.106128] [drm] fb depth is 24 [ 258.106129] [drm] pitch is 7680 [ 258.106195] fbcon: amdgpudrmfb (fb0) is primary device [ 258.232969] Console: switching to colour frame buffer device 240x67 [ 258.251691] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 258.264186] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [ 258.264190] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 258.264191] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 258.264193] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 258.264194] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 258.264195] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 258.264196] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 258.264197] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 258.264199] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 258.264200] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 258.264202] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0 [ 258.264203] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0 [ 258.264204] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 0 on hub 1 [ 258.264205] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 1 on hub 1 [ 258.264207] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 4 on hub 1 [ 258.264208] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1 [ 258.265169] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm [ 258.267030] [drm] Initialized amdgpu 3.41.0 20150101 for 0000:03:00.0 on minor 0 [ 324.784054] Bluetooth: Core ver 2.22 [ 324.784098] NET: Registered protocol family 31 [ 324.784099] Bluetooth: HCI device and connection manager initialized [ 324.784103] Bluetooth: HCI socket layer initialized [ 324.784105] Bluetooth: L2CAP socket layer initialized [ 324.784109] Bluetooth: SCO socket layer initialized [ 324.803513] Bluetooth: RFCOMM TTY layer initialized [ 324.803520] Bluetooth: RFCOMM socket layer initialized [ 324.803525] Bluetooth: RFCOMM ver 1.11 [ 325.046883] docker0: port 3(veth4e6abaa) entered blocking state [ 325.046887] docker0: port 3(veth4e6abaa) entered disabled state [ 325.046999] device veth4e6abaa entered promiscuous mode [ 325.407054] eth0: renamed from veth793033d [ 325.565970] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 325.566008] IPv6: ADDRCONF(NETDEV_CHANGE): veth4e6abaa: link becomes ready [ 325.566063] docker0: port 3(veth4e6abaa) entered blocking state [ 325.566066] docker0: port 3(veth4e6abaa) entered forwarding state [ 430.071597] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 430.071600] Bluetooth: BNEP filters: protocol multicast [ 430.071603] Bluetooth: BNEP socket layer initialized