[ 24.561098] parport_pc 00:02: reported by Plug and Play ACPI [ 24.561178] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 24.716165] Skipping EDID probe due to cached edid [ 24.850229] lp0: using parport0 (interrupt-driven). [ 27.134212] Skipping EDID probe due to cached edid [ 27.493050] Skipping EDID probe due to cached edid [ 27.857064] Skipping EDID probe due to cached edid [ 28.208063] Skipping EDID probe due to cached edid [ 32.028059] Skipping EDID probe due to cached edid [ 35.284068] Skipping EDID probe due to cached edid [ 36.152071] Skipping EDID probe due to cached edid [ 127.809872] wlan0: direct probe to 00:01:e3:58:38:b0 (try 1) [ 127.812520] wlan0: direct probe responded [ 127.820067] wlan0: authenticate with 00:01:e3:58:38:b0 (try 1) [ 127.821765] wlan0: authenticated [ 127.822298] wlan0: associate with 00:01:e3:58:38:b0 (try 1) [ 127.843481] wlan0: RX AssocResp from 00:01:e3:58:38:b0 (capab=0x431 status=0 aid=11) [ 127.843491] wlan0: associated [ 127.845578] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 127.845693] cfg80211: Calling CRDA for country: HR [ 127.856853] cfg80211: Received country IE: [ 127.856862] cfg80211: Regulatory domain: HR [ 127.856867] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 127.856876] (2402000 KHz - 2482000 KHz @ 40000 KHz), (10000 mBi, 2000 mBm) [ 127.856881] cfg80211: CRDA thinks this should applied: [ 127.856886] cfg80211: Regulatory domain: HR [ 127.856891] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 127.856899] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 127.856915] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 127.856922] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 127.856928] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 127.856933] cfg80211: We intersect both of these and get: [ 127.856938] cfg80211: Regulatory domain: 98 [ 127.856942] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 127.856949] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 127.856962] cfg80211: Leaving channel 5170 MHz intact on phy0 - no rule found in band on Country IE [ 127.856968] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 127.856975] cfg80211: Leaving channel 5190 MHz intact on phy0 - no rule found in band on Country IE [ 127.856981] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 127.856988] cfg80211: Leaving channel 5210 MHz intact on phy0 - no rule found in band on Country IE [ 127.856994] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 127.857042] cfg80211: Leaving channel 5230 MHz intact on phy0 - no rule found in band on Country IE [ 127.857053] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 127.857062] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 127.857072] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 127.857082] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 127.857092] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 127.857101] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 127.857110] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 127.857120] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 127.857129] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 127.857138] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 127.857148] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 127.857157] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 127.857166] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 127.857176] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 127.857185] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 127.857194] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 127.857205] cfg80211: Current regulatory domain updated by AP to: HR [ 127.857212] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 127.857221] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 130.432424] padlock: VIA PadLock not detected. [ 138.736037] wlan0: no IPv6 routers present [ 564.493204] wlan0: deauthenticating from 00:01:e3:58:38:b0 by local choice (reason=3) [ 564.521046] cfg80211: All devices are disconnected, going to restore regulatory settings [ 564.521053] cfg80211: Restoring regulatory settings [ 564.521058] cfg80211: Calling CRDA to update world regulatory domain [ 564.532878] cfg80211: World regulatory domain updated: [ 564.532883] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 564.532887] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 564.532890] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 564.532894] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 564.532897] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 564.532900] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 567.166312] wlan0: authenticate with 00:01:e3:58:38:b0 (try 1) [ 567.168052] wlan0: authenticated [ 567.168108] wlan0: associate with 00:01:e3:58:38:b0 (try 1) [ 567.188201] wlan0: RX AssocResp from 00:01:e3:58:38:b0 (capab=0x431 status=0 aid=11) [ 567.188211] wlan0: associated [ 567.190320] cfg80211: Calling CRDA for country: HR [ 567.201365] cfg80211: Received country IE: [ 567.201373] cfg80211: Regulatory domain: HR [ 567.201378] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 567.201387] (2402000 KHz - 2482000 KHz @ 40000 KHz), (10000 mBi, 2000 mBm) [ 567.201393] cfg80211: CRDA thinks this should applied: [ 567.201398] cfg80211: Regulatory domain: HR [ 567.201402] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 567.201409] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 567.201416] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 567.201422] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 567.201429] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 567.201434] cfg80211: We intersect both of these and get: [ 567.201439] cfg80211: Regulatory domain: 98 [ 567.201443] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 567.201450] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 567.201461] cfg80211: Leaving channel 5170 MHz intact on phy0 - no rule found in band on Country IE [ 567.201467] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 567.201474] cfg80211: Leaving channel 5190 MHz intact on phy0 - no rule found in band on Country IE [ 567.201481] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 567.201488] cfg80211: Leaving channel 5210 MHz intact on phy0 - no rule found in band on Country IE [ 567.201494] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 567.201500] cfg80211: Leaving channel 5230 MHz intact on phy0 - no rule found in band on Country IE [ 567.201507] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 567.201513] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 567.201520] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 567.201526] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 567.201533] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 567.201539] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 567.201546] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 567.201552] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 567.201559] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 567.201565] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 567.201572] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 567.201578] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 567.201585] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 567.201591] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 567.201598] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 567.201604] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 567.201613] cfg80211: Current regulatory domain updated by AP to: HR [ 567.201617] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 567.201624] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 726.105732] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 756.908064] Skipping EDID probe due to cached edid [ 1317.632108] Skipping EDID probe due to cached edid [ 1552.641138] wlan0: deauthenticating from 00:01:e3:58:38:b0 by local choice (reason=3) [ 1552.675156] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1552.675165] cfg80211: Restoring regulatory settings [ 1552.675168] cfg80211: Calling CRDA to update world regulatory domain [ 1552.680162] cfg80211: World regulatory domain updated: [ 1552.680166] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1552.680170] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1552.680173] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1552.680176] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1552.680179] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1552.680182] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1552.781186] Skipping EDID probe due to cached edid [ 1553.132198] Skipping EDID probe due to cached edid [ 1554.365054] Skipping EDID probe due to cached edid [ 1554.717040] Skipping EDID probe due to cached edid [ 1555.069054] Skipping EDID probe due to cached edid [ 1555.421072] Skipping EDID probe due to cached edid [ 1563.812368] Skipping EDID probe due to cached edid [ 1564.173055] Skipping EDID probe due to cached edid [ 1564.524062] Skipping EDID probe due to cached edid [ 1564.885085] Skipping EDID probe due to cached edid [ 1568.714479] wlan0: authenticate with 00:01:e3:58:38:b0 (try 1) [ 1568.716188] wlan0: authenticated [ 1568.716239] wlan0: associate with 00:01:e3:58:38:b0 (try 1) [ 1568.736372] wlan0: RX AssocResp from 00:01:e3:58:38:b0 (capab=0x431 status=0 aid=11) [ 1568.736380] wlan0: associated [ 1568.738152] cfg80211: Calling CRDA for country: HR [ 1568.742648] cfg80211: Received country IE: [ 1568.742651] cfg80211: Regulatory domain: HR [ 1568.742653] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1568.742656] (2402000 KHz - 2482000 KHz @ 40000 KHz), (10000 mBi, 2000 mBm) [ 1568.742658] cfg80211: CRDA thinks this should applied: [ 1568.742660] cfg80211: Regulatory domain: HR [ 1568.742661] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1568.742664] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1568.742667] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1568.742669] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1568.742671] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 1568.742673] cfg80211: We intersect both of these and get: [ 1568.742675] cfg80211: Regulatory domain: 98 [ 1568.742676] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1568.742679] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1568.742684] cfg80211: Leaving channel 5170 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742686] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742689] cfg80211: Leaving channel 5190 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742691] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742693] cfg80211: Leaving channel 5210 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742696] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742698] cfg80211: Leaving channel 5230 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742700] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742703] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742705] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742707] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742710] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742712] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742714] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742717] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742719] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742721] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742724] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742726] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742728] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742731] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742733] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742736] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 1568.742739] cfg80211: Current regulatory domain updated by AP to: HR [ 1568.742740] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1568.742743] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1570.968076] Skipping EDID probe due to cached edid [ 1673.163182] mutter[7384]: segfault at 1 ip 0090cd13 sp bfdcee60 error 4 in libgobject-2.0.so.0.2600.0[8e6000+40000]