[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: root=/dev/mapper/main_lvm-root ro splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7f50000 (usable) [ 0.000000] BIOS-e820: 00000000c7f50000 - 00000000c7f65000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7f65000 - 00000000c7f66000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7f66000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 819024) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8250 checksum 0 [ 0.000000] ACPI: RSDP 000F8250, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT C7F5C0D3, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP C7F64992, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT C7F5C13F, 87DF (r1 NVIDIA MCP67 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS C7F65FC0, 0040 [ 0.000000] ACPI: TCPA C7F64A86, 0032 (r1 Phoeni x 6040000 TL 0) [ 0.000000] ACPI: SRAT C7F64AB8, 00C8 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: SSDT C7F64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG C7F64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET C7F64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC C7F64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT C7F64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC C7F64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-d0000000 [ 0.000000] Entering add_active_range(0, 0, 158) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 819024) 1 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-130000000 [ 0.000000] Entering add_active_range(0, 0, 158) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 819024) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 819024 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1015534 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1210 pages reserved [ 0.000000] DMA zone: 2732 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800648 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c7f50000 - 00000000c7f65000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c7f65000 - 00000000c7f66000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c7f66000 - 00000000d0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000fff80000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997300 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mapper/main_lvm-root ro splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 24.523333] Marking TSC unstable due to TSCs unsynchronized [ 24.523335] time.c: Detected 1900.177 MHz processor. [ 24.526683] Console: colour VGA+ 80x25 [ 24.526687] console [tty0] enabled [ 24.532102] Checking aperture... [ 24.532161] CPU 0: aperture @ 402a000000 size 32 MB [ 24.532222] Aperture too small (32 MB) [ 24.538465] No AGP bridge found [ 24.538523] Your BIOS doesn't leave a aperture memory hole [ 24.538584] Please enable the IOMMU option in the BIOS setup [ 24.538646] This costs you 64 MB of RAM [ 24.569249] Mapping aperture over 65536 KB of RAM @ 4000000 [ 24.605249] Memory: 3915012k/4980736k available (2466k kernel code, 147124k reserved, 1309k data, 316k init) [ 24.605357] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 24.685046] Calibrating delay using timer specific routine.. 3804.16 BogoMIPS (lpj=7608321) [ 24.685194] Security Framework initialized [ 24.685257] SELinux: Disabled at boot. [ 24.685328] AppArmor: AppArmor initialized [ 24.685390] Failure registering capabilities with primary security module. [ 24.685773] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 24.688243] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 24.689467] Mount-cache hash table entries: 256 [ 24.689656] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 24.689720] CPU: L2 Cache: 256K (64 bytes/line) [ 24.689782] CPU 0/0 -> Node 0 [ 24.689840] CPU: Physical Processor ID: 0 [ 24.689899] CPU: Processor Core ID: 0 [ 24.689979] SMP alternatives: switching to UP code [ 24.690593] Early unpacking initramfs... done [ 25.059644] ACPI: Core revision 20070126 [ 25.059772] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.509393] Using local APIC timer interrupts. [ 25.561999] APIC timer calibration result 12501168 [ 25.562001] Detected 12.501 MHz APIC timer. [ 25.562157] SMP alternatives: switching to SMP code [ 25.562699] Booting processor 1/2 APIC 0x1 [ 25.573296] Initializing CPU#1 [ 25.650402] Calibrating delay using timer specific routine.. 3800.36 BogoMIPS (lpj=7600730) [ 25.650409] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 25.650411] CPU: L2 Cache: 256K (64 bytes/line) [ 25.650413] CPU 1/1 -> Node 0 [ 25.650415] CPU: Physical Processor ID: 0 [ 25.650416] CPU: Processor Core ID: 1 [ 25.650490] AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02 [ 25.650504] AMD C1E detected late. Force timer broadcast. [ 25.650044] Brought up 2 CPUs [ 25.650213] CPU0 attaching sched-domain: [ 25.650216] domain 0: span 03 [ 25.650217] groups: 01 02 [ 25.650220] domain 1: span 03 [ 25.650221] groups: 03 [ 25.650223] CPU1 attaching sched-domain: [ 25.650225] domain 0: span 03 [ 25.650226] groups: 02 01 [ 25.650228] domain 1: span 03 [ 25.650229] groups: 03 [ 25.650481] net_namespace: 120 bytes [ 25.650938] Time: 17:10:11 Date: 04/27/08 [ 25.651030] NET: Registered protocol family 16 [ 25.651282] ACPI: bus type pci registered [ 25.651414] PCI: Using configuration type 1 [ 25.652624] ACPI: EC: Look up EC in DSDT [ 25.654524] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 25.655189] ACPI: Interpreter enabled [ 25.655250] ACPI: (supports S0 S3 S4 S5) [ 25.655498] ACPI: Using IOAPIC for interrupt routing [ 25.656629] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 25.663498] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 25.663566] ACPI: EC: driver started in interrupt mode [ 25.663696] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.664662] PCI: Transparent bridge - 0000:00:08.0 [ 25.664904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.664997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 25.665017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 25.665050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 25.698803] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 25.699256] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 25.699701] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 25.700188] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 25.700675] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 25.701164] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 25.701651] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 25.702138] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 25.702580] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 25.702992] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 25.703439] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 25.703883] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 25.704332] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 25.704775] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 25.705218] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 25.705706] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 25.706149] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 25.706591] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 25.707038] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 25.707400] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.707490] pnp: PnP ACPI init [ 25.707558] ACPI: bus type pnp registered [ 25.711348] pnp: PnP ACPI: found 12 devices [ 25.713903] ACPI: ACPI bus type pnp unregistered [ 25.714236] PCI: Using ACPI for IRQ routing [ 25.714297] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.723109] NET: Registered protocol family 8 [ 25.723169] NET: Registered protocol family 20 [ 25.723319] PCI-DMA: Disabling AGP. [ 25.723607] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 25.723674] PCI-DMA: using GART IOMMU. [ 25.723738] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 25.724031] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 25.724271] hpet0: 3 32-bit timers, 25000000 Hz [ 25.725392] AppArmor: AppArmor Filesystem Enabled [ 25.726619] Time: hpet clocksource has been installed. [ 25.726693] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 25.726811] Could not switch to high resolution mode on CPU 0 [ 25.731088] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 25.731208] Could not switch to high resolution mode on CPU 1 [ 25.739172] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 25.739251] system 00:03: ioport range 0x1000-0x107f has been reserved [ 25.739315] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 25.739379] system 00:03: ioport range 0x1400-0x147f has been reserved [ 25.739443] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 25.739506] system 00:03: ioport range 0x1800-0x187f has been reserved [ 25.739570] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 25.739638] system 00:04: ioport range 0x360-0x361 has been reserved [ 25.739702] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 25.739775] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 25.739850] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 25.739924] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 25.739999] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 25.740063] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 25.740126] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 25.740633] PCI: Bridge: 0000:00:08.0 [ 25.740692] IO window: disabled. [ 25.740753] MEM window: f6100000-f61fffff [ 25.740813] PREFETCH window: disabled. [ 25.740874] PCI: Bridge: 0000:00:0c.0 [ 25.740933] IO window: 4000-4fff [ 25.740992] MEM window: f2000000-f3ffffff [ 25.741052] PREFETCH window: f0000000-f1ffffff [ 25.741113] PCI: Bridge: 0000:00:0d.0 [ 25.741172] IO window: disabled. [ 25.741231] MEM window: f6000000-f60fffff [ 25.741291] PREFETCH window: disabled. [ 25.741358] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 25.741370] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 25.741377] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 25.741427] NET: Registered protocol family 2 [ 25.783141] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 25.784582] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 25.789263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 25.789896] TCP: Hash tables configured (established 524288 bind 65536) [ 25.789963] TCP reno registered [ 25.803094] checking if image is initramfs... it is [ 26.495029] Freeing initrd memory: 8379k freed [ 26.500102] Simple Boot Flag at 0x36 set to 0x1 [ 26.500551] audit: initializing netlink socket (disabled) [ 26.500626] audit(1209316211.528:1): initialized [ 26.502852] VFS: Disk quotas dquot_6.5.1 [ 26.502994] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 26.503194] io scheduler noop registered [ 26.503255] io scheduler anticipatory registered [ 26.503316] io scheduler deadline registered [ 26.503480] io scheduler cfq registered (default) [ 26.504291] Boot video device is 0000:00:12.0 [ 26.504471] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 26.504494] assign_interrupt_mode Found MSI capability [ 26.504575] Allocate Port Service[0000:00:0c.0:pcie00] [ 26.504638] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 26.504660] assign_interrupt_mode Found MSI capability [ 26.504735] Allocate Port Service[0000:00:0d.0:pcie00] [ 26.534077] Real Time Clock Driver v1.12ac [ 26.534328] hpet_resources: 0xfed00000 is busy [ 26.534360] Linux agpgart interface v0.102 [ 26.534422] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.535610] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.535758] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 26.535927] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 26.563087] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.563153] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.573255] mice: PS/2 mouse device common for all mice [ 26.573353] cpuidle: using governor ladder [ 26.573413] cpuidle: using governor menu [ 26.573616] NET: Registered protocol family 1 [ 26.573733] registered taskstats version 1 [ 26.573928] Magic number: 4:436:189 [ 26.574025] hash matches device ttys1 [ 26.574163] hash matches device device:1b [ 26.574232] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 26.574308] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 26.574370] EDD information not available. [ 26.574437] Freeing unused kernel memory: 316k freed [ 26.592400] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 27.824927] fuse init (API version 7.9) [ 27.849285] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 27.849293] ACPI: Processor [CPU0] (supports 8 throttling states) [ 27.849867] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 27.849876] ACPI: Processor [CPU1] (supports 8 throttling states) [ 27.851259] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126] [ 27.867778] device-mapper: uevent: version 1.0.3 [ 27.867832] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 28.333016] usbcore: registered new interface driver usbfs [ 28.333041] usbcore: registered new interface driver hub [ 28.333983] usbcore: registered new device driver usb [ 28.335891] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 28.336310] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 28.336323] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 28.336449] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 28.336456] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 28.336789] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 28.336822] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 28.366965] SCSI subsystem initialized [ 28.394045] usb usb1: configuration #1 chosen from 1 choice [ 28.394071] hub 1-0:1.0: USB hub found [ 28.394081] hub 1-0:1.0: 7 ports detected [ 28.394102] libata version 3.00 loaded. [ 28.494794] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 28.494801] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] -> GSI 18 (level, low) -> IRQ 18 [ 28.494923] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 28.494930] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 28.494987] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 28.495002] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 28.553798] usb usb2: configuration #1 chosen from 1 choice [ 28.553826] hub 2-0:1.0: USB hub found [ 28.553839] hub 2-0:1.0: 2 ports detected [ 28.658637] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 28.658651] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 28.658773] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 28.658780] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 28.658840] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 28.658874] ehci_hcd 0000:00:02.1: debug port 1 [ 28.658878] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 28.658890] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 28.801398] usb 1-7: new full speed USB device using ohci_hcd and address 2 [ 28.817775] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.817908] usb usb3: configuration #1 chosen from 1 choice [ 28.817935] hub 3-0:1.0: USB hub found [ 28.817944] hub 3-0:1.0: 7 ports detected [ 28.926057] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 28.926064] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z019] -> GSI 22 (level, low) -> IRQ 22 [ 28.926186] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 28.926193] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 28.926253] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 28.926287] ehci_hcd 0000:00:04.1: debug port 1 [ 28.926291] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 28.926298] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 28.941564] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.941670] usb usb4: configuration #1 chosen from 1 choice [ 28.941693] hub 4-0:1.0: USB hub found [ 28.941700] hub 4-0:1.0: 2 ports detected [ 29.045517] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 29.045532] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 29.045542] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 29.104904] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 29.108598] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 29.108613] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 29.160725] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 29.164928] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 29.165284] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 29.165293] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 29.165299] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 29.684246] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1b:24:fa:27:ea [ 29.684253] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 29.684414] ahci 0000:00:09.0: version 3.0 [ 29.684778] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 29.684789] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 29.707761] usb 4-2: new high speed USB device using ehci_hcd and address 2 [ 29.861738] usb 4-2: configuration #1 chosen from 1 choice [ 30.167337] usb 1-7: new full speed USB device using ohci_hcd and address 3 [ 30.384481] usb 1-7: configuration #1 chosen from 1 choice [ 30.434525] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00359fa200] [ 30.685979] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 30.685985] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part [ 30.685989] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.687067] scsi0 : ahci [ 30.687433] scsi1 : ahci [ 30.687619] scsi2 : ahci [ 30.687781] scsi3 : ahci [ 30.687859] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 509 [ 30.687862] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 509 [ 30.687865] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 509 [ 30.687867] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 509 [ 31.324795] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.325564] ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100 [ 31.325568] ata1.00: 312581808 sectors, multi 16: LBA48 [ 31.326032] ata1.00: configured for UDMA/100 [ 31.644210] ata2: SATA link down (SStatus 0 SControl 300) [ 31.963626] ata3: SATA link down (SStatus 0 SControl 300) [ 32.283035] ata4: SATA link down (SStatus 0 SControl 300) [ 32.283132] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5 [ 32.284190] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 32.288054] pata_amd 0000:00:06.0: version 0.3.10 [ 32.288106] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 32.288905] scsi4 : pata_amd [ 32.289764] scsi5 : pata_amd [ 32.290092] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 32.290095] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 32.297346] Driver 'sd' needs updating - please use bus_type methods [ 32.297445] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 32.297458] sd 0:0:0:0: [sda] Write Protect is off [ 32.297461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.297479] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.297539] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 32.297551] sd 0:0:0:0: [sda] Write Protect is off [ 32.297554] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.297570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.297573] sda: sda1 sda2 sda3 < sda5 > [ 32.372840] sd 0:0:0:0: [sda] Attached SCSI disk [ 32.377377] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 32.622725] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 32.810293] ata5.00: configured for MWDMA2 [ 32.810325] ata6: port disabled. ignoring. [ 32.814314] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 32.814415] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 32.822602] Driver 'sr' needs updating - please use bus_type methods [ 32.839744] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 32.839751] Uniform CD-ROM driver Revision: 3.20 [ 32.839807] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 34.468957] kjournald starting. Commit interval 5 seconds [ 34.469286] EXT3-fs: mounted filesystem with ordered data mode. [ 43.040381] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 43.273509] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 43.294452] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 43.328873] nvidia: module license 'NVIDIA' taints kernel. [ 43.815224] ricoh-mmc: Ricoh MMC Controller disabling driver [ 43.815230] ricoh-mmc: Copyright(c) Philip Langdale [ 43.815265] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 43.815274] ricoh-mmc: Controller is now disabled. [ 43.823762] ACPI: AC Adapter [ACAD] (on-line) [ 43.871122] input: Power Button (FF) as /devices/virtual/input/input3 [ 43.884405] sdhci: Secure Digital Host Controller Interface driver [ 43.884411] sdhci: Copyright(c) Pierre Ossman [ 43.884465] sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22) [ 43.884839] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 43.884850] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 43.884974] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 43.885060] mmc0: SDHCI at 0xf6100800 irq 7 DMA [ 43.892547] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 43.892560] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 43.892567] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 43.892835] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 43.934904] ACPI: Power Button (FF) [PWRF] [ 44.106890] ACPI: Battery Slot [BAT0] (battery present) [ 44.107063] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 44.154499] ACPI: Sleep Button (CM) [SLPB] [ 44.154573] input: Lid Switch as /devices/virtual/input/input5 [ 44.378511] ACPI: Lid Switch [LID] [ 44.378609] input: Power Button (CM) as /devices/virtual/input/input6 [ 44.434054] ACPI: Power Button (CM) [PWRB] [ 44.434160] ACPI: WMI-Acer: Mapper loaded [ 44.442997] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 44.497939] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 44.849572] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 44.849587] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 44.849728] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 44.936777] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 45.016245] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 45.084818] Linux video capture interface: v2.00 [ 45.128499] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023) [ 45.130779] usbcore: registered new interface driver uvcvideo [ 45.130785] USB Video Class driver (v0.1.0) [ 45.182315] b43-phy0: Broadcom 4311 WLAN found [ 45.253789] phy0: Selected rate control algorithm 'simple' [ 46.968108] loop: module loaded [ 47.040943] lp: driver loaded but no devices found [ 47.863968] EXT3 FS on dm-1, internal journal [ 680.066690] kjournald starting. Commit interval 5 seconds [ 680.076450] EXT3 FS on sda1, internal journal [ 680.076454] EXT3-fs: mounted filesystem with ordered data mode. [ 680.103692] kjournald starting. Commit interval 5 seconds [ 680.104014] EXT3 FS on dm-2, internal journal [ 680.104019] EXT3-fs: mounted filesystem with ordered data mode. [ 680.770185] ip_tables: (C) 2000-2006 Netfilter Core Team [ 683.054990] No dock devices found. [ 683.372697] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 processors (2 cpu cores) (version 2.20.00) [ 683.373676] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x13 [ 683.373681] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14 [ 683.373683] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x15 [ 683.373686] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1a [ 685.066776] ppdev: user-space parallel port driver [ 685.213334] audit(1209316872.464:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=12851 profile="/usr/sbin/cupsd" namespace="default" [ 685.415186] NET: Registered protocol family 4 [ 685.679050] RPC: Registered udp transport module. [ 685.679055] RPC: Registered tcp transport module. [ 685.728032] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 685.833548] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 685.851019] NFSD: starting 90-second grace period [ 686.570595] Clocksource tsc unstable (delta = -289497700 ns) [ 687.757306] input: b43-phy0 as /devices/virtual/input/input9 [ 687.805585] Bluetooth: Core ver 2.11 [ 687.806048] NET: Registered protocol family 31 [ 687.806051] Bluetooth: HCI device and connection manager initialized [ 687.806056] Bluetooth: HCI socket layer initialized [ 687.825234] Bluetooth: L2CAP ver 2.9 [ 687.825240] Bluetooth: L2CAP socket layer initialized [ 687.872788] Bluetooth: RFCOMM socket layer initialized [ 687.872810] Bluetooth: RFCOMM TTY layer initialized [ 687.872812] Bluetooth: RFCOMM ver 1.8 [ 688.767480] Registered led device: b43-phy0:tx [ 688.767943] Registered led device: b43-phy0:rx [ 688.768304] Registered led device: b43-phy0:radio [ 690.121283] eth0: no link during initialization. [ 691.942199] NET: Registered protocol family 10 [ 691.942464] lo: Disabled Privacy Extensions [ 691.943896] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 691.944876] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 718.476337] CPU0 attaching NULL sched-domain. [ 718.476346] CPU1 attaching NULL sched-domain. [ 718.492529] CPU0 attaching sched-domain: [ 718.492536] domain 0: span 03 [ 718.492538] groups: 01 02 [ 718.492544] domain 1: span 03 [ 718.492545] groups: 03 [ 718.492547] CPU1 attaching sched-domain: [ 718.492549] domain 0: span 03 [ 718.492550] groups: 02 01 [ 718.492552] domain 1: span 03 [ 718.492554] groups: 03 [ 721.695179] NET: Registered protocol family 17 [ 722.570809] wlan0: Initial auth_alg=0 [ 722.570817] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 722.571134] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 722.571140] wlan0: authenticated [ 722.571143] wlan0: associate with AP 00:e0:98:54:80:3e [ 722.573175] wlan0: RX AssocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 722.573179] wlan0: associated [ 722.573183] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 722.577133] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 731.868880] wlan0: no IPv6 routers present [ 747.720204] wlan0: no IPv6 routers present [ 827.741899] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 827.741904] wlan0: deauthenticated [ 828.602694] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 828.603297] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 828.603301] wlan0: authenticated [ 828.603303] wlan0: associate with AP 00:e0:98:54:80:3e [ 828.604453] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 828.604456] wlan0: associated [ 828.604460] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 1070.720007] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 1070.720013] wlan0: deauthenticated [ 1071.718804] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 1071.720205] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 1071.720210] wlan0: authenticated [ 1071.720213] wlan0: associate with AP 00:e0:98:54:80:3e [ 1071.722862] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 1071.722869] wlan0: associated [ 1071.722875] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 1078.866253] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 1078.866259] wlan0: deauthenticated [ 1079.792738] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 1079.793908] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 1079.793914] wlan0: authenticated [ 1079.793916] wlan0: associate with AP 00:e0:98:54:80:3e [ 1079.796067] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 1079.796072] wlan0: associated [ 1079.796076] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 1148.950613] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 1148.950619] wlan0: deauthenticated [ 1149.370822] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 1149.371439] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 1149.371445] wlan0: authenticated [ 1149.371447] wlan0: associate with AP 00:e0:98:54:80:3e [ 1149.372518] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 1149.372523] wlan0: associated [ 1149.372527] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 1213.363660] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 1213.363667] wlan0: deauthenticated [ 1214.175145] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 1214.175968] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 1214.175974] wlan0: authenticated [ 1214.175976] wlan0: associate with AP 00:e0:98:54:80:3e [ 1214.176976] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 1214.176980] wlan0: associated [ 1214.176984] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 1432.435755] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 1432.435763] wlan0: deauthenticated [ 1433.431190] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 1433.433199] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 1433.433209] wlan0: authenticated [ 1433.433212] wlan0: associate with AP 00:e0:98:54:80:3e [ 1433.436831] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 1433.436839] wlan0: associated [ 1433.436851] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 1543.488807] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 1543.488813] wlan0: deauthenticated [ 1544.491113] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 1544.492480] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 1544.492484] wlan0: authenticated [ 1544.492487] wlan0: associate with AP 00:e0:98:54:80:3e [ 1544.495027] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 1544.495030] wlan0: associated [ 1544.495034] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 1933.205455] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 1933.205462] wlan0: deauthenticated [ 1933.955406] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 1933.956038] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 1933.956044] wlan0: authenticated [ 1933.956046] wlan0: associate with AP 00:e0:98:54:80:3e [ 1933.957197] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 1933.957203] wlan0: associated [ 1933.957210] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2022.518325] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2022.518331] wlan0: deauthenticated [ 2022.939686] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2022.940287] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2022.940292] wlan0: authenticated [ 2022.940295] wlan0: associate with AP 00:e0:98:54:80:3e [ 2022.941399] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2022.941404] wlan0: associated [ 2022.941410] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2091.047948] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2091.047954] wlan0: deauthenticated [ 2091.467621] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2091.468277] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2091.468284] wlan0: authenticated [ 2091.468287] wlan0: associate with AP 00:e0:98:54:80:3e [ 2091.470045] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2091.470052] wlan0: associated [ 2091.470057] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2147.522530] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4 [ 2147.523097] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 2147.995022] psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched. [ 2148.798203] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4 [ 2148.799971] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 2148.813612] psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched. [ 2148.963521] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 2148.965205] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 2148.967066] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 2148.968499] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 2148.970118] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 2148.970121] psmouse.c: issuing reconnect request [ 2151.072564] psmouse.c: Failed to reset mouse on isa0060/serio1 [ 2152.563184] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 2152.628491] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 2156.385033] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2156.385039] wlan0: deauthenticated [ 2157.344977] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2157.346205] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2157.346213] wlan0: authenticated [ 2157.346216] wlan0: associate with AP 00:e0:98:54:80:3e [ 2157.348311] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2157.348318] wlan0: associated [ 2157.348323] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2359.465615] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2359.465621] wlan0: deauthenticated [ 2360.055290] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2360.055906] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2360.055912] wlan0: authenticated [ 2360.055915] wlan0: associate with AP 00:e0:98:54:80:3e [ 2360.057510] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2360.057516] wlan0: associated [ 2360.057523] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2367.255021] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2367.255026] wlan0: deauthenticated [ 2367.674339] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2367.674956] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2367.674961] wlan0: authenticated [ 2367.674964] wlan0: associate with AP 00:e0:98:54:80:3e [ 2367.676043] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2367.676048] wlan0: associated [ 2367.676051] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2699.146866] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2699.146872] wlan0: deauthenticated [ 2699.906485] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2699.907080] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2699.907086] wlan0: authenticated [ 2699.907089] wlan0: associate with AP 00:e0:98:54:80:3e [ 2699.908161] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2699.908166] wlan0: associated [ 2699.908170] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2723.419163] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2723.419170] wlan0: deauthenticated [ 2724.420626] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2724.421995] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2724.422000] wlan0: authenticated [ 2724.422003] wlan0: associate with AP 00:e0:98:54:80:3e [ 2724.424504] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2724.424509] wlan0: associated [ 2724.424513] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2740.586750] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2740.586756] wlan0: deauthenticated [ 2741.008466] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2741.009079] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2741.009084] wlan0: authenticated [ 2741.009086] wlan0: associate with AP 00:e0:98:54:80:3e [ 2741.012520] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2741.012524] wlan0: associated [ 2741.012528] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2746.802853] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2746.802860] wlan0: deauthenticated [ 2747.700109] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2747.700719] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2747.700725] wlan0: authenticated [ 2747.700728] wlan0: associate with AP 00:e0:98:54:80:3e [ 2747.701794] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2747.701799] wlan0: associated [ 2747.701803] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2761.362696] CPU0 attaching NULL sched-domain. [ 2761.362705] CPU1 attaching NULL sched-domain. [ 2761.374255] CPU0 attaching sched-domain: [ 2761.374263] domain 0: span 03 [ 2761.374265] groups: 01 02 [ 2761.374268] domain 1: span 03 [ 2761.374270] groups: 03 [ 2761.374271] CPU1 attaching sched-domain: [ 2761.374273] domain 0: span 03 [ 2761.374274] groups: 02 01 [ 2761.374277] domain 1: span 03 [ 2761.374278] groups: 03 [ 2765.583632] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=6) [ 2765.583640] wlan0: deauthenticated [ 2766.585451] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2766.586864] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2766.586868] wlan0: authenticated [ 2766.586871] wlan0: associate with AP 00:e0:98:54:80:3e [ 2766.590154] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2766.590157] wlan0: associated [ 2766.590162] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2778.856304] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2778.856311] wlan0: deauthenticated [ 2779.335422] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2779.338485] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2779.338491] wlan0: authenticated [ 2779.338494] wlan0: associate with AP 00:e0:98:54:80:3e [ 2779.340358] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2779.340363] wlan0: associated [ 2779.340367] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e) [ 2845.561278] wlan0: RX deauthentication from 00:e0:98:54:80:3e (reason=3) [ 2845.561283] wlan0: deauthenticated [ 2846.404965] wlan0: authenticate with AP 00:e0:98:54:80:3e [ 2846.406116] wlan0: RX authentication from 00:e0:98:54:80:3e (alg=0 transaction=2 status=0) [ 2846.406120] wlan0: authenticated [ 2846.406122] wlan0: associate with AP 00:e0:98:54:80:3e [ 2846.408254] wlan0: RX ReassocResp from 00:e0:98:54:80:3e (capab=0x431 status=0 aid=2) [ 2846.408257] wlan0: associated [ 2846.408261] wlan0: switched to short barker preamble (BSSID=00:e0:98:54:80:3e)