[ 10.343108] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 10.445550] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 10.445812] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.446348] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.448700] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 10.448913] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 10.476057] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 10.479347] vboxdrv: Found 4 processor cores. [ 10.479482] vboxdrv: fAsync=0 offMin=0x226 offMax=0xb4b [ 10.479539] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 10.479540] vboxdrv: Successfully loaded version 4.3.6_Ubuntu (interface 0x001a0007). [ 10.499757] vboxpci: IOMMU not found (not registered) [ 10.578754] Ebtables v2.0 registered [ 10.600849] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.671294] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 10.671525] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 10.697689] bbswitch: version 0.8 [ 10.697696] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_ [ 10.697702] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG_.VID_ [ 10.697711] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 10.698069] bbswitch: detected an Optimus _DSM function [ 10.698083] pci 0000:01:00.0: enabling device (0000 -> 0003) [ 10.698116] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 10.702290] bbswitch: disabling discrete graphics [ 10.702304] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 10.718327] thinkpad_acpi: EC reports that Thermal Table has changed [ 10.782619] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.783180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.791221] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.911474] cgroup: systemd-logind (1662) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 10.911479] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 11.338254] Bridge firewalling registered [ 11.432276] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 11.479779] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 13.286675] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 14.939508] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 15.211296] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input12 [ 20.705101] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory [ 39.862042] audit_printk_skb: 168 callbacks suppressed [ 39.862046] type=1400 audit(1395829170.073:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3706 comm="apparmor_parser" [ 39.862055] type=1400 audit(1395829170.073:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3706 comm="apparmor_parser" [ 39.862684] type=1400 audit(1395829170.073:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3706 comm="apparmor_parser" [ 51.621362] wlan0: authenticate with 70:10:5c:35:91:1f [ 51.657947] wlan0: send auth to 70:10:5c:35:91:1f (try 1/3) [ 51.719687] wlan0: authenticated [ 51.720611] wlan0: associate with 70:10:5c:35:91:1f (try 1/3) [ 51.724855] wlan0: RX AssocResp from 70:10:5c:35:91:1f (capab=0x11 status=0 aid=13) [ 51.730783] wlan0: associated [ 51.730847] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 51.731070] cfg80211: Calling CRDA for country: SE [ 51.737383] cfg80211: Regulatory domain changed to country: SE [ 51.737385] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.737387] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.737388] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.737390] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.737391] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 51.737392] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 657.587205] type=1400 audit(1395826187.884:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4625 comm="apparmor_parser" [ 657.587219] type=1400 audit(1395826187.884:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4625 comm="apparmor_parser" [ 657.587926] type=1400 audit(1395826187.884:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4625 comm="apparmor_parser" [ 1285.180965] wlan0: authenticate with 70:10:5c:35:91:10 [ 1285.230999] wlan0: direct probe to 70:10:5c:35:91:10 (try 1/3) [ 1285.238661] cfg80211: Calling CRDA to update world regulatory domain [ 1285.247756] cfg80211: World regulatory domain updated: [ 1285.247760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1285.247763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1285.247765] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1285.247767] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1285.247769] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1285.247771] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1285.434594] wlan0: direct probe to 70:10:5c:35:91:10 (try 2/3) [ 1285.638627] wlan0: direct probe to 70:10:5c:35:91:10 (try 3/3) [ 1285.842665] wlan0: authentication with 70:10:5c:35:91:10 timed out [ 1286.267158] wlan0: authenticate with 70:10:5c:35:91:1f [ 1286.303461] wlan0: send auth to 70:10:5c:35:91:1f (try 1/3) [ 1286.304560] wlan0: authenticated [ 1286.306707] wlan0: associate with 70:10:5c:35:91:1f (try 1/3) [ 1286.310200] wlan0: RX AssocResp from 70:10:5c:35:91:1f (capab=0x11 status=0 aid=13) [ 1286.313761] wlan0: associated [ 1286.313834] cfg80211: Calling CRDA for country: SE [ 1286.316674] cfg80211: Regulatory domain changed to country: SE [ 1286.316678] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1286.316680] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1286.316682] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1286.316683] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1286.316685] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 1286.316686] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [19056.899532] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [24972.940310] wlan0: deauthenticating from 70:10:5c:35:91:1f by local choice (reason=3) [24972.960791] cfg80211: Calling CRDA to update world regulatory domain [24972.966564] cfg80211: World regulatory domain updated: [24972.966568] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24972.966570] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24972.966572] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24972.966574] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24972.966575] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24972.966577] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24973.445084] PM: Syncing filesystems ... done. [24973.457705] PM: Preparing system for mem sleep [24973.463602] bbswitch: enabling discrete graphics [24973.726336] Freezing user space processes ... (elapsed 0.001 seconds) done. [24973.727828] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [24973.728912] PM: Entering mem sleep [24973.728950] Suspending console(s) (use no_console_suspend to debug) [24973.899933] sd 0:0:0:0: [sda] Synchronizing SCSI cache [24973.900006] sd 0:0:0:0: [sda] Stopping disk [24974.489651] PM: suspend of devices complete after 760.413 msecs [24974.489755] PM: late suspend of devices complete after 0.102 msecs [24974.489907] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [24974.521611] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [24974.537630] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [24974.553508] e1000e 0000:00:19.0: System wakeup enabled by ACPI [24974.585515] PM: noirq suspend of devices complete after 95.733 msecs [24974.585730] ACPI: Preparing to enter system sleep state S3 [24974.588068] PM: Saving platform NVS memory [24974.588853] Disabling non-boot CPUs ... [24974.590260] kvm: disabling virtualization on CPU1 [24974.590505] smpboot: CPU 1 is now offline [24974.591126] Broke affinity for irq 50 [24974.592129] kvm: disabling virtualization on CPU2 [24974.693519] smpboot: CPU 2 is now offline [24974.693890] Broke affinity for irq 23 [24974.694053] Broke affinity for irq 46 [24974.695053] kvm: disabling virtualization on CPU3 [24974.797546] smpboot: CPU 3 is now offline [24974.800430] ACPI: Low-level resume complete [24974.800513] PM: Restoring platform NVS memory [24974.802708] Enabling non-boot CPUs ... [24974.802792] x86: Booting SMP configuration: [24974.802795] smpboot: Booting Node 0 Processor 1 APIC 0x1 [24974.813719] Initializing CPU#1 [24974.814248] Disabled fast string operations [24974.814355] kvm: enabling virtualization on CPU1 [24974.846423] CPU1 is up [24974.846487] smpboot: Booting Node 0 Processor 2 APIC 0x2 [24974.857313] Initializing CPU#2 [24974.857459] Disabled fast string operations [24974.857551] kvm: enabling virtualization on CPU2 [24974.890436] CPU2 is up [24974.890492] smpboot: Booting Node 0 Processor 3 APIC 0x3 [24974.901416] Initializing CPU#3 [24974.901559] Disabled fast string operations [24974.901644] kvm: enabling virtualization on CPU3 [24974.934446] CPU3 is up [24974.945074] ACPI: Waking up from system sleep state S3 [24975.009488] thinkpad_acpi: EC reports that Thermal Table has changed [24975.094449] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [24975.126450] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [24975.174517] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [24975.174655] PM: noirq resume of devices complete after 158.926 msecs [24975.174952] PM: early resume of devices complete after 0.238 msecs [24975.175059] e1000e 0000:00:19.0: System wakeup disabled by ACPI [24975.175083] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [24975.175145] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [24975.175666] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [24975.176162] usb usb3: root hub lost power or was reset [24975.176166] usb usb4: root hub lost power or was reset [24975.176597] xhci_hcd 0000:0d:00.0: irq 41 for MSI/MSI-X [24975.176621] xhci_hcd 0000:0d:00.0: irq 42 for MSI/MSI-X [24975.176645] xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X [24975.176668] xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X [24975.176691] xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X [24975.211537] [drm] Wrong MCH_SSKPD value: 0x16040307 [24975.211539] [drm] This can cause pipe underruns and display issues. [24975.211540] [drm] Please upgrade your BIOS to fix this. [24975.386670] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [24975.510543] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [24975.510576] ata5: SATA link down (SStatus 0 SControl 300) [24975.518526] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [24975.519037] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24975.519044] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24975.519048] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24975.519931] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24975.519938] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24975.519942] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24975.520225] ata1.00: configured for UDMA/133 [24975.534641] sd 0:0:0:0: [sda] Starting disk [24975.550695] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci [24975.696164] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [24975.696997] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [24975.697004] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24975.711401] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [24975.711850] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [24975.711857] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24975.713514] ata2.00: configured for UDMA/100 [24975.718754] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [24975.813637] PM: resume of devices complete after 638.506 msecs [24975.814602] PM: Finishing wakeup. [24975.816387] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking [24975.818679] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock! [24975.814606] Restarting tasks ... done. [24975.823684] video LNXVIDEO:00: Restoring backlight state [24975.837614] video LNXVIDEO:01: Restoring backlight state [24975.846646] bbswitch: disabling discrete graphics [24975.846677] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [24975.872951] thinkpad_acpi: EC reports that Thermal Table has changed [24976.235203] init: anacron main process (24656) killed by TERM signal [24976.304569] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600 [24976.358934] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [24976.361619] EXT4-fs (sda7): re-mounted. Opts: commit=600 [24976.462908] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [24976.463291] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [24976.469065] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [24976.469290] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [24976.563522] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [24976.670788] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [24982.077794] wlan0: authenticate with 70:10:5c:35:8f:5f [24982.113914] wlan0: send auth to 70:10:5c:35:8f:5f (try 1/3) [24982.154025] wlan0: authenticated [24982.154310] wlan0: waiting for beacon from 70:10:5c:35:8f:5f [24982.260421] wlan0: associate with 70:10:5c:35:8f:5f (try 1/3) [24982.262444] wlan0: RX AssocResp from 70:10:5c:35:8f:5f (capab=0x11 status=0 aid=39) [24982.269030] wlan0: associated [24982.269098] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [24982.269338] cfg80211: Calling CRDA for country: SE [24982.277832] cfg80211: Regulatory domain changed to country: SE [24982.277841] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24982.277848] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [24982.277853] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [24982.277859] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [24982.277864] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [24982.277869] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [25024.822751] wlan0: deauthenticating from 70:10:5c:35:8f:5f by local choice (reason=3) [25024.834829] cfg80211: Calling CRDA to update world regulatory domain [25024.837811] cfg80211: World regulatory domain updated: [25024.837816] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25024.837818] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25024.837821] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25024.837823] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [25024.837825] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25024.837827] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25025.369534] init: anacron main process (25645) killed by TERM signal [25025.425113] PM: Syncing filesystems ... done. [25025.437580] PM: Preparing system for mem sleep [25025.437858] bbswitch: enabling discrete graphics [25025.700719] Freezing user space processes ... (elapsed 0.001 seconds) done. [25025.702447] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [25025.703677] PM: Entering mem sleep [25025.703726] Suspending console(s) (use no_console_suspend to debug) [25025.990861] sd 0:0:0:0: [sda] Synchronizing SCSI cache [25025.991010] sd 0:0:0:0: [sda] Stopping disk [25026.556456] PM: suspend of devices complete after 731.801 msecs [25026.556560] PM: late suspend of devices complete after 0.102 msecs [25026.556711] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [25026.588515] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [25026.604546] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [25026.620422] e1000e 0000:00:19.0: System wakeup enabled by ACPI [25026.652469] PM: noirq suspend of devices complete after 95.831 msecs [25026.653358] ACPI: Preparing to enter system sleep state S3 [25026.656602] PM: Saving platform NVS memory [25026.657410] Disabling non-boot CPUs ... [25026.658774] kvm: disabling virtualization on CPU1 [25026.760451] smpboot: CPU 1 is now offline [25026.761121] Broke affinity for irq 50 [25026.762125] kvm: disabling virtualization on CPU2 [25026.864562] smpboot: CPU 2 is now offline [25026.866121] kvm: disabling virtualization on CPU3 [25026.968616] smpboot: CPU 3 is now offline [25026.971559] ACPI: Low-level resume complete [25026.971642] PM: Restoring platform NVS memory [25026.973822] Enabling non-boot CPUs ... [25026.973910] x86: Booting SMP configuration: [25026.973912] smpboot: Booting Node 0 Processor 1 APIC 0x1 [25026.984861] Initializing CPU#1 [25026.985391] Disabled fast string operations [25026.985487] kvm: enabling virtualization on CPU1 [25027.017488] CPU1 is up [25027.017547] smpboot: Booting Node 0 Processor 2 APIC 0x2 [25027.028472] Initializing CPU#2 [25027.028617] Disabled fast string operations [25027.028714] kvm: enabling virtualization on CPU2 [25027.061518] CPU2 is up [25027.061572] smpboot: Booting Node 0 Processor 3 APIC 0x3 [25027.072495] Initializing CPU#3 [25027.072639] Disabled fast string operations [25027.072718] kvm: enabling virtualization on CPU3 [25027.105550] CPU3 is up [25027.116323] ACPI: Waking up from system sleep state S3 [25027.265636] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [25027.297652] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [25027.345747] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [25027.345885] PM: noirq resume of devices complete after 160.291 msecs [25027.346182] PM: early resume of devices complete after 0.239 msecs [25027.346289] e1000e 0000:00:19.0: System wakeup disabled by ACPI [25027.346303] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [25027.346379] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25027.347426] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [25027.347930] usb usb3: root hub lost power or was reset [25027.347934] usb usb4: root hub lost power or was reset [25027.348374] xhci_hcd 0000:0d:00.0: irq 41 for MSI/MSI-X [25027.348398] xhci_hcd 0000:0d:00.0: irq 42 for MSI/MSI-X [25027.348422] xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X [25027.348446] xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X [25027.348469] xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X [25027.390848] [drm] Wrong MCH_SSKPD value: 0x16040307 [25027.390850] [drm] This can cause pipe underruns and display issues. [25027.390851] [drm] Please upgrade your BIOS to fix this. [25027.497080] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 [25027.497101] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS [25027.561907] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [25027.689922] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [25027.689958] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [25027.690433] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25027.690439] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25027.690444] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25027.691347] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25027.691353] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25027.691358] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25027.692245] ata1.00: configured for UDMA/133 [25027.697909] ata5: SATA link down (SStatus 0 SControl 300) [25027.706040] sd 0:0:0:0: [sda] Starting disk [25027.726105] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [25027.866786] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [25027.867625] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [25027.867632] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25027.882034] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [25027.882479] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [25027.882486] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25027.884143] ata2.00: configured for UDMA/100 [25027.890377] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci [25027.992164] PM: resume of devices complete after 645.477 msecs [25027.993072] PM: Finishing wakeup. [25027.993076] Restarting tasks ... done. [25027.999382] video LNXVIDEO:00: Restoring backlight state [25028.001390] video LNXVIDEO:01: Restoring backlight state [25028.007814] bbswitch: disabling discrete graphics [25028.007843] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [25028.032817] thinkpad_acpi: EC reports that Thermal Table has changed [25028.482461] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600 [25028.512716] EXT4-fs (sda7): re-mounted. Opts: commit=600 [25028.597802] init: anacron main process (26020) killed by TERM signal [25028.730727] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [25028.875792] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25028.979048] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25028.979334] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [25028.981133] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [25028.981343] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [25029.086317] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [25030.888456] thinkpad_acpi: fan watchdog: enabling fan [25034.280222] wlan0: authenticate with 70:10:5c:35:8f:5f [25034.285230] wlan0: send auth to 70:10:5c:35:8f:5f (try 1/3) [25034.286353] wlan0: authenticated [25034.290955] wlan0: associate with 70:10:5c:35:8f:5f (try 1/3) [25034.292776] wlan0: RX AssocResp from 70:10:5c:35:8f:5f (capab=0x11 status=0 aid=46) [25034.296154] wlan0: associated [25034.296175] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [25034.296245] cfg80211: Calling CRDA for country: SE [25034.299071] cfg80211: Regulatory domain changed to country: SE [25034.299073] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25034.299075] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25034.299077] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25034.299078] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25034.299080] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [25034.299082] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [25034.378325] wlan0: deauthenticating from 70:10:5c:35:8f:5f by local choice (reason=2) [25034.384630] cfg80211: Calling CRDA to update world regulatory domain [25034.385682] wlan0: authenticate with 70:10:5c:35:8f:5f [25034.390321] wlan0: send auth to 70:10:5c:35:8f:5f (try 1/3) [25034.390537] cfg80211: World regulatory domain updated: [25034.390543] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25034.390548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25034.390553] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25034.390557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [25034.390561] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25034.390565] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25034.391367] wlan0: authenticated [25034.395033] wlan0: associate with 70:10:5c:35:8f:5f (try 1/3) [25034.397942] wlan0: RX AssocResp from 70:10:5c:35:8f:5f (capab=0x11 status=0 aid=46) [25034.401494] wlan0: associated [25034.401525] cfg80211: Calling CRDA for country: SE [25034.403833] cfg80211: Regulatory domain changed to country: SE [25034.403835] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25034.403836] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25034.403837] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25034.403838] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25034.403839] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [25034.403840] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [25125.821368] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25126.177942] wlan0: deauthenticating from 70:10:5c:35:8f:5f by local choice (reason=3) [25126.194397] cfg80211: Calling CRDA to update world regulatory domain [25126.200350] cfg80211: World regulatory domain updated: [25126.200355] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25126.200358] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25126.200361] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25126.200364] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [25126.200366] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25126.200368] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [25126.979581] init: anacron main process (26963) killed by TERM signal [25127.032679] PM: Syncing filesystems ... done. [25127.045162] PM: Preparing system for mem sleep [25127.045427] bbswitch: enabling discrete graphics [25127.307369] Freezing user space processes ... (elapsed 0.001 seconds) done. [25127.309114] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [25127.310341] PM: Entering mem sleep [25127.310383] Suspending console(s) (use no_console_suspend to debug) [25127.594161] sd 0:0:0:0: [sda] Synchronizing SCSI cache [25127.594259] sd 0:0:0:0: [sda] Stopping disk [25128.163132] PM: suspend of devices complete after 731.895 msecs [25128.163237] PM: late suspend of devices complete after 0.103 msecs [25128.163387] pcieport 0000:00:1c.4: System wakeup enabled by ACPI [25128.195190] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [25128.211263] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [25128.227100] e1000e 0000:00:19.0: System wakeup enabled by ACPI [25128.259144] PM: noirq suspend of devices complete after 95.829 msecs [25128.260032] ACPI: Preparing to enter system sleep state S3 [25128.263309] PM: Saving platform NVS memory [25128.264151] Disabling non-boot CPUs ... [25128.265472] kvm: disabling virtualization on CPU1 [25128.367150] smpboot: CPU 1 is now offline [25128.368784] kvm: disabling virtualization on CPU2 [25128.471225] smpboot: CPU 2 is now offline [25128.472754] kvm: disabling virtualization on CPU3 [25128.575282] smpboot: CPU 3 is now offline [25128.578244] ACPI: Low-level resume complete [25128.578328] PM: Restoring platform NVS memory [25128.580522] Enabling non-boot CPUs ... [25128.580610] x86: Booting SMP configuration: [25128.580613] smpboot: Booting Node 0 Processor 1 APIC 0x1 [25128.591538] Initializing CPU#1 [25128.592067] Disabled fast string operations [25128.592164] kvm: enabling virtualization on CPU1 [25128.624168] CPU1 is up [25128.624218] smpboot: Booting Node 0 Processor 2 APIC 0x2 [25128.635143] Initializing CPU#2 [25128.635288] Disabled fast string operations [25128.635380] kvm: enabling virtualization on CPU2 [25128.668193] CPU2 is up [25128.668241] smpboot: Booting Node 0 Processor 3 APIC 0x3 [25128.679163] Initializing CPU#3 [25128.679308] Disabled fast string operations [25128.679393] kvm: enabling virtualization on CPU3 [25128.712226] CPU3 is up [25128.723033] ACPI: Waking up from system sleep state S3 [25128.872306] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [25128.904323] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [25128.952414] pcieport 0000:00:1c.4: System wakeup disabled by ACPI [25128.952550] PM: noirq resume of devices complete after 160.344 msecs [25128.952859] PM: early resume of devices complete after 0.250 msecs [25128.952971] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [25128.953152] e1000e 0000:00:19.0: System wakeup disabled by ACPI [25128.953217] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25128.953811] usb usb3: root hub lost power or was reset [25128.953816] usb usb4: root hub lost power or was reset [25128.954093] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X [25128.954280] xhci_hcd 0000:0d:00.0: irq 42 for MSI/MSI-X [25128.954308] xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X [25128.954334] xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X [25128.954359] xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X [25128.954387] xhci_hcd 0000:0d:00.0: irq 51 for MSI/MSI-X [25128.993425] [drm] Wrong MCH_SSKPD value: 0x16040307 [25128.993427] [drm] This can cause pipe underruns and display issues. [25128.993428] [drm] Please upgrade your BIOS to fix this. [25129.164656] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci [25129.280577] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [25129.284581] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [25129.285064] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25129.285070] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25129.285075] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25129.285954] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [25129.285960] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [25129.285965] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25129.286249] ata1.00: configured for UDMA/133 [25129.288591] ata5: SATA link down (SStatus 0 SControl 300) [25129.300678] sd 0:0:0:0: [sda] Starting disk [25129.328810] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci [25129.477171] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [25129.478011] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [25129.478017] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25129.492400] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [25129.492851] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [25129.492857] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [25129.494504] ata2.00: configured for UDMA/100 [25129.496870] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [25129.591409] PM: resume of devices complete after 638.052 msecs [25129.592307] PM: Finishing wakeup. [25129.592311] Restarting tasks ... done. [25129.614555] video LNXVIDEO:00: Restoring backlight state [25129.622051] video LNXVIDEO:01: Restoring backlight state [25129.629653] bbswitch: disabling discrete graphics [25129.629678] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [25129.666713] thinkpad_acpi: EC reports that Thermal Table has changed [25130.076307] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600 [25130.098578] EXT4-fs (sda7): re-mounted. Opts: commit=600 [25130.174527] init: anacron main process (27342) killed by TERM signal [25130.425676] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25130.529666] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25130.530044] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [25130.533791] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [25130.534013] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [25130.640082] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [25130.801767] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [25133.115599] thinkpad_acpi: fan watchdog: enabling fan [25133.592337] wlan0: authenticate with 70:10:5c:35:91:1f [25133.628616] wlan0: send auth to 70:10:5c:35:91:1f (try 1/3) [25133.726554] wlan0: authenticated [25133.727069] wlan0: waiting for beacon from 70:10:5c:35:91:1f [25133.832135] wlan0: associate with 70:10:5c:35:91:1f (try 1/3) [25133.834151] wlan0: RX AssocResp from 70:10:5c:35:91:1f (capab=0x11 status=0 aid=12) [25133.840792] wlan0: associated [25133.840858] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [25133.841100] cfg80211: Calling CRDA for country: SE [25133.848872] cfg80211: Regulatory domain changed to country: SE [25133.848877] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [25133.848881] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25133.848884] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25133.848887] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [25133.848889] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [25133.848892] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [25161.717550] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X [25161.753385] thinkpad_acpi: EC reports that Thermal Table has changed [25161.815942] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [25161.820919] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [25161.867367] EXT4-fs (sda7): re-mounted. Opts: commit=0 [26775.858068] type=1400 audit(1395912266.259:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=30148 comm="apparmor_parser" [26775.858077] type=1400 audit(1395912266.259:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=30148 comm="apparmor_parser" [26775.858514] type=1400 audit(1395912266.259:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=30148 comm="apparmor_parser" [27286.167859] wlan0: authenticate with 70:10:5c:da:50:10 [27286.220361] wlan0: direct probe to 70:10:5c:da:50:10 (try 1/3) [27286.220479] cfg80211: Calling CRDA to update world regulatory domain [27286.223159] cfg80211: World regulatory domain updated: [27286.223162] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [27286.223164] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27286.223165] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27286.223167] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27286.223169] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27286.223170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27286.424293] wlan0: direct probe to 70:10:5c:da:50:10 (try 2/3) [27286.628330] wlan0: direct probe to 70:10:5c:da:50:10 (try 3/3) [27286.832431] wlan0: authentication with 70:10:5c:da:50:10 timed out [27287.239146] wlan0: authenticate with 70:10:5c:35:91:1f [27287.274571] wlan0: send auth to 70:10:5c:35:91:1f (try 1/3) [27287.310444] wlan0: authenticated [27287.312517] wlan0: associate with 70:10:5c:35:91:1f (try 1/3) [27287.316308] wlan0: RX AssocResp from 70:10:5c:35:91:1f (capab=0x11 status=0 aid=12) [27287.320946] wlan0: associated [27287.321102] cfg80211: Calling CRDA for country: SE [27287.326182] cfg80211: Regulatory domain changed to country: SE [27287.326187] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [27287.326190] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [27287.326192] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [27287.326194] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [27287.326197] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [27287.326199] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [30460.207654] systemd-hostnamed[32631]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [30732.447932] wlan0: authenticate with 70:10:5c:35:91:10 [30732.497152] wlan0: direct probe to 70:10:5c:35:91:10 (try 1/3) [30732.497348] cfg80211: Calling CRDA to update world regulatory domain [30732.505505] cfg80211: World regulatory domain updated: [30732.505511] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [30732.505516] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30732.505520] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30732.505523] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [30732.505526] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30732.505530] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [30732.697902] wlan0: direct probe to 70:10:5c:35:91:10 (try 2/3) [30732.901992] wlan0: direct probe to 70:10:5c:35:91:10 (try 3/3) [30733.105921] wlan0: authentication with 70:10:5c:35:91:10 timed out [30733.513567] wlan0: authenticate with 70:10:5c:35:91:1f [30733.548463] wlan0: send auth to 70:10:5c:35:91:1f (try 1/3) [30733.584562] wlan0: authenticated [30733.586059] wlan0: associate with 70:10:5c:35:91:1f (try 1/3) [30733.590491] wlan0: RX AssocResp from 70:10:5c:35:91:1f (capab=0x11 status=0 aid=12) [30733.595816] wlan0: associated [30733.595877] cfg80211: Calling CRDA for country: SE [30733.598175] cfg80211: Regulatory domain changed to country: SE [30733.598178] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [30733.598180] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [30733.598188] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [30733.598190] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [30733.598191] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [30733.598193] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)