[    4.698116] init: plymouth-splash main process (1235) terminated with status 1
[    5.390954] init: anacron main process (1036) killed by TERM signal
[    5.993301] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    7.451234] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    7.689405] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15
[    9.558063] wlan0: authenticate with 00:d0:9e:f5:fb:e9
[    9.562176] wlan0: send auth to 00:d0:9e:f5:fb:e9 (try 1/3)
[    9.577989] wlan0: authenticated
[    9.578139] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[    9.578142] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[    9.578144] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[    9.581902] wlan0: associate with 00:d0:9e:f5:fb:e9 (try 1/3)
[    9.593958] wlan0: RX AssocResp from 00:d0:9e:f5:fb:e9 (capab=0x51 status=0 aid=4)
[    9.596058] wlan0: associated
[    9.596095] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3696.574752] thinkpad_acpi: EC reports that Thermal Table has changed
[ 3697.174739] thinkpad_acpi: EC reports that Thermal Table has changed
[ 4226.489657] audit_printk_skb: 189 callbacks suppressed
[ 4226.489666] type=1400 audit(1383152850.756:74): apparmor="STATUS" operation="profile_replace" parent=4060 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4064 comm="apparmor_parser"
[ 4226.489687] type=1400 audit(1383152850.756:75): apparmor="STATUS" operation="profile_replace" parent=4060 profile="unconfined" name="/usr/sbin/cupsd" pid=4064 comm="apparmor_parser"
[ 4226.491376] type=1400 audit(1383152850.756:76): apparmor="STATUS" operation="profile_replace" parent=4060 profile="unconfined" name="/usr/sbin/cupsd" pid=4064 comm="apparmor_parser"
[ 6395.772393] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 6395.772411] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 6395.772965] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 6395.772981] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 6395.883516] wlan0: deauthenticating from 00:d0:9e:f5:fb:e9 by local choice (reason=3)
[ 6395.904917] cfg80211: Calling CRDA to update world regulatory domain
[ 6395.912693] cfg80211: World regulatory domain updated:
[ 6395.912703] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6395.912709] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6395.912713] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6395.912717] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6395.912721] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6395.912725] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6398.045135] PM: Syncing filesystems ... done.
[ 6398.054113] PM: Preparing system for mem sleep
[ 6398.054340] Freezing user space processes ... (elapsed 0.698 seconds) done.
[ 6398.753498] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6398.754798] PM: Entering mem sleep
[ 6398.754839] Suspending console(s) (use no_console_suspend to debug)
[ 6398.927309] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6398.928449] sd 0:0:0:0: [sda] Stopping disk
[ 6399.145470] mei_me 0000:00:16.0: suspend
[ 6399.161252] i915 0000:00:02.0: power state changed by ACPI to D3cold
[ 6399.177291] PM: suspend of devices complete after 421.846 msecs
[ 6399.177438] PM: late suspend of devices complete after 0.145 msecs
[ 6399.193303] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6399.209207] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[ 6399.209356] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 6399.225224] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[ 6399.241270] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6399.257261] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[ 6399.257287] PM: noirq suspend of devices complete after 79.756 msecs
[ 6399.257524] ACPI: Preparing to enter system sleep state S3
[ 6399.259675] PM: Saving platform NVS memory
[ 6399.260434] Disabling non-boot CPUs ...
[ 6399.261696] smpboot: CPU 1 is now offline
[ 6399.365386] smpboot: CPU 2 is now offline
[ 6399.365788] Broke affinity for irq 40
[ 6399.365789] Broke affinity for irq 41
[ 6399.469506] smpboot: CPU 3 is now offline
[ 6399.471029] ACPI: Low-level resume complete
[ 6399.471076] PM: Restoring platform NVS memory
[ 6399.471638] Enabling non-boot CPUs ...
[ 6399.471690] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6399.555496] CPU1 is up
[ 6399.555517] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6399.639583] CPU2 is up
[ 6399.639602] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6399.723680] CPU3 is up
[ 6399.728198] ACPI: Waking up from system sleep state S3
[ 6399.777590] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6399.791698] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 6399.807755] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6399.839768] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[ 6399.855788] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 6399.871960] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[ 6399.887824] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6399.920387] PM: noirq resume of devices complete after 142.672 msecs
[ 6399.920535] PM: early resume of devices complete after 0.114 msecs
[ 6399.920560] i915 0000:00:02.0: setting latency timer to 64
[ 6399.920578] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 6399.920607] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 6399.920696] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 6399.920717] ahci 0000:00:1f.2: setting latency timer to 64
[ 6399.920814] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 6399.920926] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 6400.132223] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
[ 6400.240177] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6400.240569] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6400.240571] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6400.241262] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6400.241268] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6400.241472] ata1.00: configured for UDMA/100
[ 6400.256265] sd 0:0:0:0: [sda] Starting disk
[ 6400.296360] usb 2-1.6: reset full-speed USB device number 5 using ehci-pci
[ 6400.460609] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
[ 6400.624758] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[ 6400.788987] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
[ 6400.953154] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 6401.081194] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 6401.567304] PM: resume of devices complete after 1644.878 msecs
[ 6401.567503] PM: Finishing wakeup.
[ 6401.567504] Restarting tasks ... done.
[ 6401.582564] video LNXVIDEO:00: Restoring backlight state
[ 6401.762685] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 6401.769262] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6401.858634] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6408.316542] wlan0: authenticate with 00:d0:9e:f5:fb:e9
[ 6408.324937] wlan0: send auth to 00:d0:9e:f5:fb:e9 (try 1/3)
[ 6408.331721] wlan0: authenticated
[ 6408.332129] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6408.332141] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 6408.332148] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 6408.333527] wlan0: associate with 00:d0:9e:f5:fb:e9 (try 1/3)
[ 6408.335849] wlan0: RX AssocResp from 00:d0:9e:f5:fb:e9 (capab=0x51 status=0 aid=4)
[ 6408.338683] wlan0: associated
[ 6408.338753] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8466.824846] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[10722.440426] perf samples too long (5017 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[34420.510147] wlan0: deauthenticated from 00:d0:9e:f5:fb:e9 (Reason: 7)
[34420.553224] cfg80211: Calling CRDA to update world regulatory domain
[34420.567104] cfg80211: World regulatory domain updated:
[34420.567116] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[34420.567124] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[34420.567131] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[34420.567137] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[34420.567143] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[34420.567150] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[34423.825718] wlan0: authenticate with 00:d0:9e:f5:fb:e9
[34423.828316] wlan0: send auth to 00:d0:9e:f5:fb:e9 (try 1/3)
[34423.830834] wlan0: authenticated
[34423.831256] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[34423.831268] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[34423.831276] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[34423.835131] wlan0: associate with 00:d0:9e:f5:fb:e9 (try 1/3)
[34423.836888] wlan0: RX AssocResp from 00:d0:9e:f5:fb:e9 (capab=0x51 status=0 aid=2)
[34423.839381] wlan0: associated
[36169.404747] usb 3-2.1: USB disconnect, device number 3
[36171.291847] thinkpad_acpi: EC reports that Thermal Table has changed
[36172.845816] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[36172.845831] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[36172.846335] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[36172.846346] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[36172.966222] wlan0: deauthenticating from 00:d0:9e:f5:fb:e9 by local choice (reason=3)
[36173.066890] cfg80211: Calling CRDA to update world regulatory domain
[36173.076633] cfg80211: World regulatory domain updated:
[36173.076646] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36173.076654] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36173.076661] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36173.076666] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[36173.076672] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36173.076678] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36175.312908] PM: Syncing filesystems ... done.
[36175.326980] PM: Preparing system for mem sleep
[36175.327663] Freezing user space processes ... (elapsed 0.577 seconds) done.
[36175.906061] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[36175.907392] PM: Entering mem sleep
[36175.907445] Suspending console(s) (use no_console_suspend to debug)
[36176.058668] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[36176.059857] sd 0:0:0:0: [sda] Stopping disk
[36176.299190] mei_me 0000:00:16.0: suspend
[36176.314973] i915 0000:00:02.0: power state changed by ACPI to D3cold
[36176.315040] PM: suspend of devices complete after 407.006 msecs
[36176.315172] PM: late suspend of devices complete after 0.131 msecs
[36176.331049] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[36176.346930] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[36176.347111] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[36176.362938] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[36176.379033] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[36176.394979] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[36176.395055] PM: noirq suspend of devices complete after 79.790 msecs
[36176.395292] ACPI: Preparing to enter system sleep state S3
[36176.398391] PM: Saving platform NVS memory
[36176.399197] Disabling non-boot CPUs ...
[36176.503102] smpboot: CPU 1 is now offline
[36176.607218] smpboot: CPU 2 is now offline
[36176.607684] Broke affinity for irq 16
[36176.607693] Broke affinity for irq 23
[36176.607695] Broke affinity for irq 40
[36176.711330] smpboot: CPU 3 is now offline
[36176.714190] ACPI: Low-level resume complete
[36176.714261] PM: Restoring platform NVS memory
[36176.715134] Enabling non-boot CPUs ...
[36176.715173] smpboot: Booting Node 0 Processor 1 APIC 0x1
[36176.782836] CPU1 is up
[36176.782885] smpboot: Booting Node 0 Processor 2 APIC 0x2
[36176.850814] CPU2 is up
[36176.850836] smpboot: Booting Node 0 Processor 3 APIC 0x3
[36176.918891] CPU3 is up
[36176.923398] ACPI: Waking up from system sleep state S3
[36176.972316] i915 0000:00:02.0: power state changed by ACPI to D0
[36176.986908] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[36177.002956] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[36177.034979] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[36177.050998] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[36177.067167] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[36177.083038] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[36177.115600] PM: noirq resume of devices complete after 143.159 msecs
[36177.115748] PM: early resume of devices complete after 0.112 msecs
[36177.115790] i915 0000:00:02.0: setting latency timer to 64
[36177.115791] xhci_hcd 0000:00:14.0: setting latency timer to 64
[36177.115821] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[36177.115964] ehci-pci 0000:00:1a.0: setting latency timer to 64
[36177.116027] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[36177.116083] ehci-pci 0000:00:1d.0: setting latency timer to 64
[36177.116103] ahci 0000:00:1f.2: setting latency timer to 64
[36177.327522] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[36177.435430] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[36177.435788] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[36177.435806] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[36177.436428] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[36177.436433] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[36177.436632] ata1.00: configured for UDMA/100
[36177.451515] sd 0:0:0:0: [sda] Starting disk
[36177.663908] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
[36177.827923] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[36177.992156] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
[36178.156477] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
[36178.212329] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[36178.320670] usb 2-1.6: reset full-speed USB device number 5 using ehci-pci
[36178.421031] PM: resume of devices complete after 1303.783 msecs
[36178.421239] PM: Finishing wakeup.
[36178.421240] Restarting tasks ... done.
[36178.434289] video LNXVIDEO:00: Restoring backlight state
[36178.536903] init: anacron main process (26257) killed by TERM signal
[36178.611140] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[36178.617737] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[36178.701514] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[36192.508854] usb 3-2: USB disconnect, device number 2
[36192.520839] usb 4-2: USB disconnect, device number 2
[36193.106591] thinkpad_acpi: undocked from hotplug port replicator
[36193.106693] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[36193.106700] thinkpad_acpi: unhandled HKEY event 0x60c0
[36193.106704] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[36193.108115] thinkpad_acpi: undocked from hotplug port replicator
[36193.113124] ACPI: Device does not support D3cold
[36193.113136] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: undocking
[36214.955836] thinkpad_acpi: docked into hotplug port replicator
[36215.194968] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[36215.194982] thinkpad_acpi: unhandled HKEY event 0x60c0
[36215.194987] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[36216.312430] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
[36216.333746] usb 4-2: New USB device found, idVendor=05e3, idProduct=0612
[36216.333759] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[36216.333765] usb 4-2: Product: USB3.0 Hub
[36216.333769] usb 4-2: Manufacturer: GenesysLogic
[36216.344293] hub 4-2:1.0: USB hub found
[36216.344725] hub 4-2:1.0: 4 ports detected
[36216.516311] usb 3-2: new high-speed USB device number 4 using xhci_hcd
[36216.522540] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away.
[36216.542782] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610
[36216.542794] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[36216.542800] usb 3-2: Product: USB2.0 Hub
[36216.542805] usb 3-2: Manufacturer: GenesysLogic
[36216.544238] hub 3-2:1.0: USB hub found
[36216.545436] hub 3-2:1.0: 4 ports detected
[36217.031802] psmouse serio1: resync failed, issuing reconnect request
[36218.871482] thinkpad_acpi: docked into hotplug port replicator
[36218.919251] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
[36218.932676] ACPI: Battery Slot [BAT1] (battery present)
[36218.978174] psmouse serio1: bad data from KBC - timeout
[36338.159958] wlan0: authenticate with 00:15:ff:16:ca:3d
[36338.164940] wlan0: send auth to 00:15:ff:16:ca:3d (try 1/3)
[36338.169380] wlan0: authenticated
[36338.169786] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[36338.169796] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[36338.171638] wlan0: associate with 00:15:ff:16:ca:3d (try 1/3)
[36338.204044] wlan0: RX AssocResp from 00:15:ff:16:ca:3d (capab=0x431 status=0 aid=1)
[36338.206744] wlan0: associated
[36338.206823] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[36338.207042] cfg80211: Calling CRDA for country: US
[36338.216070] cfg80211: Regulatory domain changed to country: US
[36338.216079] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36338.216085] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[36338.216089] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[36338.216093] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36338.216097] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36338.216100] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36338.216104] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[36338.216108] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[36803.817857] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[36803.817872] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[36803.818362] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[36803.818372] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[36803.927748] wlan0: deauthenticating from 00:15:ff:16:ca:3d by local choice (reason=3)
[36803.937839] cfg80211: Calling CRDA to update world regulatory domain
[36803.948071] cfg80211: World regulatory domain updated:
[36803.948082] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36803.948090] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36803.948097] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36803.948103] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[36803.948108] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36803.948114] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36806.082858] init: anacron main process (26768) killed by TERM signal
[36806.135485] PM: Syncing filesystems ... done.
[36806.146655] PM: Preparing system for mem sleep
[36806.146945] Freezing user space processes ... (elapsed 0.681 seconds) done.
[36806.828996] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[36806.830326] PM: Entering mem sleep
[36806.830379] Suspending console(s) (use no_console_suspend to debug)
[36806.979492] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[36806.980684] sd 0:0:0:0: [sda] Stopping disk
[36807.197232] mei_me 0000:00:16.0: suspend
[36807.213014] i915 0000:00:02.0: power state changed by ACPI to D3cold
[36807.213037] PM: suspend of devices complete after 382.097 msecs
[36807.213183] PM: late suspend of devices complete after 0.144 msecs
[36807.229090] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[36807.244972] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[36807.245154] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[36807.260986] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[36807.277080] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[36807.293022] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[36807.293099] PM: noirq suspend of devices complete after 79.823 msecs
[36807.293336] ACPI: Preparing to enter system sleep state S3
[36807.296522] PM: Saving platform NVS memory
[36807.297347] Disabling non-boot CPUs ...
[36807.401149] smpboot: CPU 1 is now offline
[36807.505266] smpboot: CPU 2 is now offline
[36807.505703] Broke affinity for irq 16
[36807.505714] Broke affinity for irq 41
[36807.609415] smpboot: CPU 3 is now offline
[36807.612245] ACPI: Low-level resume complete
[36807.612316] PM: Restoring platform NVS memory
[36807.613142] Enabling non-boot CPUs ...
[36807.613184] smpboot: Booting Node 0 Processor 1 APIC 0x1
[36807.680797] CPU1 is up
[36807.680817] smpboot: Booting Node 0 Processor 2 APIC 0x2
[36807.748869] CPU2 is up
[36807.748889] smpboot: Booting Node 0 Processor 3 APIC 0x3
[36807.816946] CPU3 is up
[36807.821428] ACPI: Waking up from system sleep state S3
[36807.870387] i915 0000:00:02.0: power state changed by ACPI to D0
[36807.884965] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[36807.901011] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[36807.933032] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[36807.949058] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[36807.965238] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[36807.981095] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[36808.013658] PM: noirq resume of devices complete after 143.146 msecs
[36808.013801] PM: early resume of devices complete after 0.117 msecs
[36808.013835] i915 0000:00:02.0: setting latency timer to 64
[36808.013842] xhci_hcd 0000:00:14.0: setting latency timer to 64
[36808.013929] ehci-pci 0000:00:1a.0: setting latency timer to 64
[36808.013965] ahci 0000:00:1f.2: setting latency timer to 64
[36808.014060] ehci-pci 0000:00:1d.0: setting latency timer to 64
[36808.014079] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[36808.014110] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[36808.225466] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
[36808.333511] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[36808.333863] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[36808.333882] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[36808.334591] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[36808.334596] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[36808.334795] ata1.00: configured for UDMA/100
[36808.349542] sd 0:0:0:0: [sda] Starting disk
[36808.389641] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
[36808.553909] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[36808.718098] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci
[36808.882264] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[36809.218675] usb 2-1.6: reset full-speed USB device number 5 using ehci-pci
[36809.505113] PM: resume of devices complete after 1489.600 msecs
[36809.505272] PM: Finishing wakeup.
[36809.505273] Restarting tasks ... done.
[36809.512456] video LNXVIDEO:00: Restoring backlight state
[36809.589098] init: anacron main process (27095) killed by TERM signal
[36809.719981] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[36809.726589] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[36809.813856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[36809.963372] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[36816.455629] wlan0: authenticate with 00:15:ff:16:ca:3d
[36816.458641] wlan0: send auth to 00:15:ff:16:ca:3d (try 1/3)
[36816.461060] wlan0: authenticated
[36816.461707] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[36816.461723] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[36816.462812] wlan0: associate with 00:15:ff:16:ca:3d (try 1/3)
[36816.471520] wlan0: RX AssocResp from 00:15:ff:16:ca:3d (capab=0x431 status=0 aid=2)
[36816.480569] wlan0: associated
[36816.481282] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[36816.481509] cfg80211: Calling CRDA for country: US
[36816.488304] cfg80211: Regulatory domain changed to country: US
[36816.488315] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36816.488323] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[36816.488330] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[36816.488335] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36816.488341] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36816.488346] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36816.488350] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[36816.488357] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[36903.081942] IPv6: ipv6_create_tempaddr: regeneration time exceeded - disabled temporary address support
[36970.503602] psmouse serio1: bad data from KBC - timeout
[36971.321539] psmouse serio1: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 5 bytes away.
[36971.831007] psmouse serio1: resync failed, issuing reconnect request
[36983.493583] usb 3-2: USB disconnect, device number 4
[36983.533639] usb 4-2: USB disconnect, device number 3
[36984.091336] thinkpad_acpi: undocked from hotplug port replicator
[36984.091444] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[36984.091451] thinkpad_acpi: unhandled HKEY event 0x60c0
[36984.091455] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[36984.092894] thinkpad_acpi: undocked from hotplug port replicator
[36984.097635] ACPI: Device does not support D3cold
[36984.097647] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: undocking
[37025.723238] thinkpad_acpi: docked into hotplug port replicator
[37025.965680] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[37025.965693] thinkpad_acpi: unhandled HKEY event 0x60c0
[37025.965698] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[37026.489700] thinkpad_acpi: docked into hotplug port replicator
[37026.531005] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
[37026.543591] ACPI: Battery Slot [BAT1] (battery present)
[37027.067913] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd
[37027.089413] usb 4-2: New USB device found, idVendor=05e3, idProduct=0612
[37027.089424] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[37027.089430] usb 4-2: Product: USB3.0 Hub
[37027.089434] usb 4-2: Manufacturer: GenesysLogic
[37027.099910] hub 4-2:1.0: USB hub found
[37027.100396] hub 4-2:1.0: 4 ports detected
[37027.215632] usb 3-2: new high-speed USB device number 5 using xhci_hcd
[37027.241911] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610
[37027.241923] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[37027.241929] usb 3-2: Product: USB2.0 Hub
[37027.241933] usb 3-2: Manufacturer: GenesysLogic
[37027.243292] hub 3-2:1.0: USB hub found
[37027.244512] hub 3-2:1.0: 4 ports detected
[37062.652798] usb 3-2.1: new low-speed USB device number 6 using xhci_hcd
[37062.677868] usb 3-2.1: New USB device found, idVendor=045e, idProduct=007d
[37062.677879] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[37062.677885] usb 3-2.1: Product: Microsoft Notebook/Mobile Optical Mouse 2.0
[37062.677889] usb 3-2.1: Manufacturer: Microsoft
[37062.678163] usb 3-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[37062.681701] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input16
[37062.682053] hid-generic 0003:045E:007D.0005: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:14.0-2.1/input0