Dumping 124 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20080609'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = true  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.type = 'acpi'  (string)
  system.chassis.manufacturer = 'To Be Filled By O.E.M.'  (string)
  system.chassis.type = 'Desktop'  (string)
  system.firmware.release_date = '06/28/2007'  (string)
  system.firmware.vendor = 'American Megatrends Inc.'  (string)
  system.firmware.version = 'A7327MLN.10J'  (string)
  system.formfactor = 'desktop'  (string)
  system.hardware.primary_video.product = 1025  (0x401)  (int)
  system.hardware.primary_video.vendor = 4318  (0x10de)  (int)
  system.hardware.product = 'MS-7327'  (string)
  system.hardware.serial = 'To Be Filled By O.E.M.'  (string)
  system.hardware.uuid = 'AC924A00-847A-DA11-87EF-480B6C8669E4'  (string)
  system.hardware.vendor = 'MEDIONPC'  (string)
  system.hardware.version = '1.0'  (string)
  system.kernel.machine = 'i686'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.27-7-generic'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_P001'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 5000+'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_P001'  (string)
  linux.acpi_path = '/proc/acpi/processor/P001'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = false  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_P002'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 5000+'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_P002'  (string)
  linux.acpi_path = '/proc/acpi/processor/P002'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = false  (bool)
  processor.number = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/snd/timer'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  access_control.file = '/dev/sequencer2'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'  (string)
  linux.device_file = '/dev/sequencer2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2'  (string)
  oss.device_file = '/dev/sequencer2'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  access_control.file = '/dev/sequencer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'  (string)
  linux.device_file = '/dev/sequencer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer'  (string)
  oss.device_file = '/dev/sequencer'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  access_control.file = '/dev/snd/seq'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/seq'  (string)
  alsa.type = 'sequencer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
  linux.device_file = '/dev/snd/seq'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/seq'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event4'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (FF)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'Power Button (FF)'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0d'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0c'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0103)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.id = 'PNP0103'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
  info.linux.driver = 'parport_pc'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ECP printer port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.description = 'ECP printer port'  (string)
  pnp.id = 'PNP0401'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'
  info.capabilities = {'serial'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'  (string)
  linux.device_file = '/dev/ttyS1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06/tty/ttyS1'  (string)
  serial.device = '/dev/ttyS1'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'  (string)
  serial.port = 1  (0x1)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
  info.capabilities = {'serial'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05/tty/ttyS0'  (string)
  serial.device = '/dev/ttyS0'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  serial.port = 0  (0x0)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT-style speaker sound'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.linux.driver = 'rtc_cmos'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PCI Bus'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.description = 'PCI Bus'  (string)
  pnp.id = 'PNP0a03'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.linux.driver = 'pcspkr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  info.product = 'PC Speaker'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
  input.device = '/dev/input/event5'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.product = 'PC Speaker'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (eisa.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/eisa.0'  (string)
  platform.id = 'eisa.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
  info.linux.driver = 'k8temp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'  (string)
  pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'  (string)
  pci.product_id = 4355  (0x1103)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] DRAM Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'  (string)
  pci.product = 'K8 [Athlon64/Opteron] DRAM Controller'  (string)
  pci.product_id = 4354  (0x1102)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] Address Map'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'  (string)
  pci.product = 'K8 [Athlon64/Opteron] Address Map'  (string)
  pci.product_id = 4353  (0x1101)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'  (string)
  pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'  (string)
  pci.product_id = 4352  (0x1100)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4384'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SBx00 PCI to PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4384'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4'  (string)
  pci.product = 'SBx00 PCI to PCI Bridge'  (string)
  pci.product_id = 17284  (0x4384)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3044'
  info.linux.driver = 'ohci1394'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4384'  (string)
  info.product = 'VT6306 Fire II IEEE 1394 OHCI Link Layer Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3044'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:00.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:03:00.0'  (string)
  pci.product = 'VT6306 Fire II IEEE 1394 OHCI Link Layer Controller'  (string)
  pci.product_id = 12356  (0x3044)  (int)
  pci.subsys_product_id = 12925  (0x327d)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438d'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 PCI to LPC Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438d'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3'  (string)
  pci.product = 'SB600 PCI to LPC Bridge'  (string)
  pci.product_id = 17293  (0x438d)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383'
  info.linux.driver = 'HDA Intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SBx00 Azalia (Intel HDA)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2'  (string)
  pci.product = 'SBx00 Azalia (Intel HDA)'  (string)
  pci.product_id = 17283  (0x4383)  (int)
  pci.subsys_product_id = 29483  (0x732b)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383'  (string)
  info.product = 'HDA ATI SB Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0'  (string)
  sound.card = 0  (0x0)  (int)
  sound.card_id = 'HDA ATI SB'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_2'
  access_control.file = '/dev/snd/pcmC0D2c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 2  (0x2)  (int)
  alsa.device_file = '/dev/snd/pcmC0D2c'  (string)
  alsa.device_id = 'ALC888 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_2'  (string)
  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D2c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_1'
  access_control.file = '/dev/snd/pcmC0D1c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.device_file = '/dev/snd/pcmC0D1c'  (string)
  alsa.device_id = 'ALC888 Digital'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Digital ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D1c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0'
  access_control.file = '/dev/snd/pcmC0D0p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  alsa.device_id = 'ALC888 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Analog ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0'
  access_control.file = '/dev/snd/pcmC0D0c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  alsa.device_id = 'ALC888 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/mixer'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA ATI SB'  (string)
  oss.device_file = '/dev/mixer'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0'
  access_control.file = '/dev/dsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/dsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA ATI SB'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC0'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA ATI SB'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'HDA ATI SB ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0'
  access_control.file = '/dev/audio'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/audio'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA ATI SB'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1'
  access_control.file = '/dev/adsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1'  (string)
  linux.device_file = '/dev/adsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/adsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA ATI SB'  (string)
  oss.device = 1  (0x1)  (int)
  oss.device_file = '/dev/adsp'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c'
  info.linux.driver = 'pata_atiixp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 IDE'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1'  (string)
  pci.product = 'SB600 IDE'  (string)
  pci.product_id = 17292  (0x438c)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host5/scsi_host/host5'  (string)
  scsi_host.host = 5  (0x5)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host4/scsi_host/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 4  (0x4)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVD-RAM GSA-H55N'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'HL-DT-ST'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0/scsi_generic/sg1'  (string)
  scsi_generic.device = '/dev/sg1'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GSA_H55N'
  access_control.file = '/dev/scd0'  (string)
  access_control.type = 'cdrom'  (string)
  block.device = '/dev/scd0'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GSA_H55N'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0'  (string)
  info.product = 'DVD-RAM GSA-H55N'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GSA_H55N'  (string)
  info.vendor = 'HL-DT-ST'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0/block/sr0'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'scsi'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = true  (bool)
  storage.cdrom.dvdrw = true  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 8468  (0x2114)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 8468  (0x2114)  (int)
  storage.cdrom.write_speeds = {'8468', '7056', '4234', '2822'} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DVD-RAM GSA-H55N'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'HL-DT-ST'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4385'
  info.linux.driver = 'piix4_smbus'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SBx00 SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4385'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0'  (string)
  pci.product = 'SBx00 SMBus Controller'  (string)
  pci.product_id = 17285  (0x4385)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4386'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 USB Controller (EHCI)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4386'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5'  (string)
  pci.product = 'SB600 USB Controller (EHCI)'  (string)
  pci.product_id = 17286  (0x4386)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4386'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/006/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6'  (string)
  usb_device.bus_number = 6  (0x6)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 10  (0xa)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:13.5'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5'  (string)
  info.product = '9-in-2 Card Reader'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228'  (string)
  info.vendor = 'Standard Microsystems Corp.'  (string)
  linux.device_file = '/dev/bus/usb/006/004'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8'  (string)
  usb_device.bus_number = 6  (0x6)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 1300  (0x514)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 4  (0x4)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8'  (string)
  usb_device.max_power = 96  (0x60)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = '9-in-2 Card Reader'  (string)
  usb_device.product_id = 8744  (0x2228)  (int)
  usb_device.serial = '000022272228'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Standard Microsystems Corp.'  (string)
  usb_device.vendor_id = 1060  (0x424)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0'
  info.linux.driver = 'usb-storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228'  (string)
  info.product = 'USB Mass Storage Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0'  (string)
  usb.bus_number = 6  (0x6)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 1300  (0x514)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 8  (0x8)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 80  (0x50)  (int)
  usb.interface.subclass = 6  (0x6)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 4  (0x4)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0'  (string)
  usb.max_power = 96  (0x60)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Mass Storage Interface'  (string)
  usb.product_id = 8744  (0x2228)  (int)
  usb.serial = '000022272228'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Standard Microsystems Corp.'  (string)
  usb.vendor_id = 1060  (0x424)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6'  (string)
  scsi_host.host = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/scsi_host/host6'  (string)
  scsi_host.host = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun2'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:2'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 6  (0x6)  (int)
  scsi.lun = 2  (0x2)  (int)
  scsi.model = 'Flash HS-SM'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Generic'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun2_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun2'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun2_scsi_generic'  (string)
  linux.device_file = '/dev/sg4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:2/scsi_generic/sg4'  (string)
  scsi_generic.device = '/dev/sg4'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_SM_000022272228_0_2'
  access_control.file = '/dev/sdd'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdd'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 48  (0x30)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_SM_000022272228_0_2'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun2'  (string)
  info.product = 'Flash HS-SM'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_SM_000022272228_0_2'  (string)
  info.vendor = 'Generic'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:2/block/sdd'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'smart_media'  (string)
  storage.firmware_version = '5.14'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 2  (0x2)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'Flash HS-SM'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'Generic_Flash_HS-SM_000022272228-0:2'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'Generic'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun1'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:1'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 6  (0x6)  (int)
  scsi.lun = 1  (0x1)  (int)
  scsi.model = 'Flash HS-MS/SD'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Generic'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun1_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun1'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun1_scsi_generic'  (string)
  linux.device_file = '/dev/sg3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:1/scsi_generic/sg3'  (string)
  scsi_generic.device = '/dev/sg3'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_MS_SD_000022272228_0_1'
  access_control.file = '/dev/sdc'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdc'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 32  (0x20)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_MS_SD_000022272228_0_1'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun1'  (string)
  info.product = 'Flash HS-MS/SD'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_MS_SD_000022272228_0_1'  (string)
  info.vendor = 'Generic'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:1/block/sdc'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'memory_stick'  (string)
  storage.firmware_version = '5.14'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 1  (0x1)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'Flash HS-MS/SD'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'Generic_Flash_HS-MS.SD_000022272228-0:1'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'Generic'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 6  (0x6)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'Flash HS-CF'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'Generic'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg2'  (string)
  scsi_generic.device = '/dev/sg2'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_CF_000022272228_0_0'
  access_control.file = '/dev/sdb'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdb'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 16  (0x10)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_CF_000022272228_0_0'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'Flash HS-CF'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic_Flash_HS_CF_000022272228_0_0'  (string)
  info.vendor = 'Generic'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-8/6-8:1.0/host6/target6:0:0/6:0:0:0/block/sdb'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'compact_flash'  (string)
  storage.firmware_version = '5.14'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'Flash HS-CF'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_424_2228_000022272228_if0'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'Generic_Flash_HS-CF_000022272228-0:0'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'Generic'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5'  (string)
  info.product = 'F5D7050A Wireless Adapter'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial'  (string)
  info.vendor = 'Belkin Components'  (string)
  linux.device_file = '/dev/bus/usb/006/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-1'  (string)
  usb_device.bus_number = 6  (0x6)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 1  (0x1)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-1'  (string)
  usb_device.max_power = 300  (0x12c)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'F5D7050A Wireless Adapter'  (string)
  usb_device.product_id = 28762  (0x705a)  (int)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Belkin Components'  (string)
  usb_device.vendor_id = 1293  (0x50d)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial_if0'
  info.linux.driver = 'rt73usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial'  (string)
  info.product = 'USB Vendor Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-1/6-1:1.0'  (string)
  usb.bus_number = 6  (0x6)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 1  (0x1)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 255  (0xff)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 255  (0xff)  (int)
  usb.interface.subclass = 255  (0xff)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-1/6-1:1.0'  (string)
  usb.max_power = 300  (0x12c)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Vendor Specific Interface'  (string)
  usb.product_id = 28762  (0x705a)  (int)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Belkin Components'  (string)
  usb.vendor_id = 1293  (0x50d)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/net_00_1c_df_9d_88_a4_0'
  info.capabilities = {'net', 'net.80211control'} (string list)
  info.category = 'net.80211control'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial_if0'  (string)
  info.product = 'Networking Wireless Control Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_1c_df_9d_88_a4_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-1/6-1:1.0/net/wmaster0'  (string)
  net.address = '00:1c:df:9d:88:a4'  (string)
  net.arp_proto_hw_id = 801  (0x321)  (int)
  net.interface = 'wmaster0'  (string)
  net.linux.ifindex = 3  (0x3)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial_if0'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_1c_df_9d_88_a4'
  info.capabilities = {'net', 'net.80211'} (string list)
  info.category = 'net.80211'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial_if0'  (string)
  info.product = 'WLAN Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_1c_df_9d_88_a4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-1/6-1:1.0/net/wlan0'  (string)
  net.80211.mac_address = 124010727588  (0x1cdf9d88a4)  (uint64)
  net.address = '00:1c:df:9d:88:a4'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'wlan0'  (string)
  net.linux.ifindex = 4  (0x4)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/usb_device_50d_705a_noserial_if0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0'  (string)
  usb.bus_number = 6  (0x6)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 10  (0xa)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:13.5'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_1002_438b'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 USB (OHCI4)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438b'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4'  (string)
  pci.product = 'SB600 USB (OHCI4)'  (string)
  pci.product_id = 17291  (0x438b)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_4'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438b'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_4'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/005/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5'  (string)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:13.4'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_4_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_4'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_4_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:13.4'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_1002_438a'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 USB (OHCI3)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_438a'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3'  (string)
  pci.product = 'SB600 USB (OHCI3)'  (string)
  pci.product_id = 17290  (0x438a)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_3'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_438a'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_3'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4'  (string)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:13.3'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_3_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_3'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_3_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0'  (string)
  usb.bus_number = 4  (0x4)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:13.3'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_1002_4389'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 USB (OHCI2)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4389'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2'  (string)
  pci.product = 'SB600 USB (OHCI2)'  (string)
  pci.product_id = 17289  (0x4389)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4389'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:13.2'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2'  (string)
  info.product = 'USB Game Controllers'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial'  (string)
  info.vendor = 'Mega World International, Ltd'  (string)
  linux.device_file = '/dev/bus/usb/003/003'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 257  (0x101)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 3  (0x3)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1'  (string)
  usb_device.max_power = 350  (0x15e)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'USB Game Controllers'  (string)
  usb_device.product_id = 792  (0x318)  (int)
  usb_device.speed = 1.5 (1.5) (double)
  usb_device.vendor = 'Mega World International, Ltd'  (string)
  usb_device.vendor_id = 1973  (0x7b5)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial_if0'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 257  (0x101)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 3  (0x3)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0'  (string)
  usb.max_power = 350  (0x15e)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 792  (0x318)  (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'Mega World International, Ltd'  (string)
  usb.vendor_id = 1973  (0x7b5)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial_if0_logicaldev_input'
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial_if0'  (string)
  info.product = 'Mega World USB Game Controllers'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event6'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_7b5_318_noserial_if0'  (string)
  input.product = 'Mega World USB Game Controllers'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0/input/input7/event6'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:13.2'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_1002_4388'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 USB (OHCI1)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4388'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1'  (string)
  pci.product = 'SB600 USB (OHCI1)'  (string)
  pci.product_id = 17288  (0x4388)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4388'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:13.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1'  (string)
  info.product = 'LX710 Cordless Desktop Laser'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'  (string)
  info.vendor = 'Logitech, Inc.'  (string)
  linux.device_file = '/dev/bus/usb/002/003'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 14352  (0x3810)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 3  (0x3)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1'  (string)
  usb_device.max_power = 98  (0x62)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 2  (0x2)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'LX710 Cordless Desktop Laser'  (string)
  usb_device.product_id = 50455  (0xc517)  (int)
  usb_device.speed = 1.5 (1.5) (double)
  usb_device.vendor = 'Logitech, Inc.'  (string)
  usb_device.vendor_id = 1133  (0x46d)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.1'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 14352  (0x3810)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 1  (0x1)  (int)
  usb.interface.protocol = 2  (0x2)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 3  (0x3)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.1'  (string)
  usb.max_power = 98  (0x62)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 50455  (0xc517)  (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'Logitech, Inc.'  (string)
  usb.vendor_id = 1133  (0x46d)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keys', 'input.mouse', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'  (string)
  info.product = 'Logitech USB Receiver'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1_logicaldev_input'  (string)
  input.device = '/dev/input/event2'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if1'  (string)
  input.product = 'Logitech USB Receiver'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'de'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.1/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 14352  (0x3810)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 3  (0x3)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0'  (string)
  usb.max_power = 98  (0x62)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 2  (0x2)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 50455  (0xc517)  (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'Logitech, Inc.'  (string)
  usb.vendor_id = 1133  (0x46d)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'  (string)
  info.product = 'Logitech USB Receiver'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event1'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c517_noserial_if0'  (string)
  input.product = 'Logitech USB Receiver'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'de'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-1/2-1:1.0/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:13.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_1002_4387'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 USB (OHCI0)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4387'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0'  (string)
  pci.product = 'SB600 USB (OHCI0)'  (string)
  pci.product_id = 17287  (0x4387)  (int)
  pci.subsys_product_id = 29479  (0x7327)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4387'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:13.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:13.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380'
  info.linux.driver = 'ahci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'SB600 Non-Raid-5 SATA'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 6  (0x6)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0'  (string)
  pci.product = 'SB600 Non-Raid-5 SATA'  (string)
  pci.product_id = 17280  (0x4380)  (int)
  pci.subsys_product_id = 29481  (0x7329)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host3/scsi_host/host3'  (string)
  scsi_host.host = 3  (0x3)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host2/scsi_host/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'ST3360320AS'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'
  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0'  (string)
  info.product = 'ST3360320AS'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda'  (string)
  storage.automount_enabled_hint = false  (bool)
  storage.bus = 'scsi'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '3.AA'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'ST3360320AS'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 360080695296  (0x53d67b6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = '1ATA_ST3360320AS_6QF2TP63'  (string)
  storage.size = 360080695296  (0x53d67b6000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_57985ade_e590_45fb_bfd8_79a991c0bc93'
  block.device = '/dev/sda6'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 6  (0x6)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_57985ade_e590_45fb_bfd8_79a991c0bc93'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda6'  (string)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 963837  (0xeb4fd)  (uint64)
  volume.partition.media_size = 360080695296  (0x53d67b6000)  (uint64)
  volume.partition.number = 6  (0x6)  (int)
  volume.partition.start = 359584598016  (0x53b8e98800)  (uint64)
  volume.size = 493484544  (0x1d69fa00)  (uint64)
  volume.uuid = '57985ade-e590-45fb-bfd8-79a991c0bc93'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_8f5f46a0_e6c6_458e_82db_d260945e38cc'
  block.device = '/dev/sda5'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_8f5f46a0_e6c6_458e_82db_d260945e38cc'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda5'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 19502847  (0x12996ff)  (uint64)
  volume.partition.media_size = 360080695296  (0x53d67b6000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.start = 349599108096  (0x5165bb0c00)  (uint64)
  volume.size = 9985457664  (0x2532dfe00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '8f5f46a0-e6c6-458e-82db-d260945e38cc'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_c8d28946_16e5_475e_9be0_b616593d7b26'
  block.device = '/dev/sda4'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 4  (0x4)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_c8d28946_16e5_475e_9be0_b616593d7b26'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda4'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/home'  (string)
  volume.num_blocks = 6297480  (0x601788)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 360080695296  (0x53d67b6000)  (uint64)
  volume.partition.number = 4  (0x4)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 346374766080  (0x50a58b7e00)  (uint64)
  volume.partition.type = '0x83'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 3224309760  (0xc02f1000)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'c8d28946-16e5-475e-9be0-b616593d7b26'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024'
  block.device = '/dev/sda3'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 3  (0x3)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda3'  (string)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2  (0x2)  (uint64)
  volume.partition.media_size = 360080695296  (0x53d67b6000)  (uint64)
  volume.partition.number = 3  (0x3)  (int)
  volume.partition.start = 349599075840  (0x5165ba8e00)  (uint64)
  volume.size = 1024  (0x400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_E8D0A7A9D0A77D06'
  block.device = '/dev/sda2'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.product = 'DATA'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_E8D0A7A9D0A77D06'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda2'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ntfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '3.1'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'DATA'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
  volume.mount_point = '/media/DATA'  (string)
  volume.num_blocks = 592621785  (0x2352b0d9)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 360080695296  (0x53d67b6000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 42952412160  (0xa0029cc00)  (uint64)
  volume.partition.type = '0x07'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 303422353920  (0x46a561b200)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'E8D0A7A9D0A77D06'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_64DEFA74DEFA3E3C'
  block.device = '/dev/sda1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3360320AS_6QF2TP63'  (string)
  info.product = 'BOOT'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_64DEFA74DEFA3E3C'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ntfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '3.1'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'BOOT'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 83891367  (0x50014a7)  (uint64)
  volume.partition.flags = {'boot'} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 360080695296  (0x53d67b6000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.partition.type = '0x07'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 42952379904  (0xa00294e00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '64DEFA74DEFA3E3C'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_7917'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'RS690 PCI to PCI Bridge (PCI Express Port 3)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_7917'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0'  (string)
  pci.product = 'RS690 PCI to PCI Bridge (PCI Express Port 3)'  (string)
  pci.product_id = 30999  (0x7917)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10ec_8168'
  info.linux.driver = 'r8169'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_7917'  (string)
  info.product = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8168'  (string)
  info.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:02:00.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:02:00.0'  (string)
  pci.product = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'  (string)
  pci.product_id = 33128  (0x8168)  (int)
  pci.subsys_product_id = 12924  (0x327c)  (int)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'  (string)
  pci.subsys_vendor_id = 5218  (0x1462)  (int)
  pci.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.vendor_id = 4332  (0x10ec)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_1d_92_21_be_d0'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8168'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_1d_92_21_be_d0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:02:00.0/net/eth0'  (string)
  net.80203.mac_address = 127005736656  (0x1d9221bed0)  (uint64)
  net.address = '00:1d:92:21:be:d0'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8168'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_1002_7913'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_7913'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.product = 'RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)'  (string)
  pci.product_id = 30995  (0x7913)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_401'
  info.linux.driver = 'nvidia'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_7913'  (string)
  info.product = 'GeForce 8600GT'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_401'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0'  (string)
  pci.product = 'GeForce 8600GT'  (string)
  pci.product_id = 1025  (0x401)  (int)
  pci.subsys_product_id = 8838  (0x2286)  (int)
  pci.subsys_vendor = 'XFX Pine Group Inc.'  (string)
  pci.subsys_vendor_id = 5762  (0x1682)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_7910'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'RS690 Host Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_7910'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = 'RS690 Host Bridge'  (string)
  pci.product_id = 30992  (0x7910)  (int)
  pci.subsys_product_id = 30992  (0x7910)  (int)
  pci.subsys_vendor = 'ATI Technologies Inc'  (string)
  pci.subsys_vendor_id = 4098  (0x1002)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'  (string)
  access_control.type = 'camera'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_1002_7910'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fuse'  (string)


Dumped 124 device(s) from the Global Device List.
------------------------------------------------