[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-19-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #28-Ubuntu SMP Wed Mar 31 17:46:20 UTC 2010 (Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004f6e0000 (usable) [ 0.000000] BIOS-e820: 000000004f6e0000 - 000000004f6f7000 (ACPI data) [ 0.000000] BIOS-e820: 000000004f6f7000 - 000000004f6f9000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004f700000 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x4f6e0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FF0000000 write-back [ 0.000000] 2 base 04FF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000004f6e0000 (usable) [ 0.000000] modified: 000000004f6e0000 - 000000004f6f7000 (ACPI data) [ 0.000000] modified: 000000004f6f7000 - 000000004f6f9000 (ACPI NVS) [ 0.000000] modified: 000000004f700000 - 0000000050000000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37877000 - 37fef427 [ 0.000000] Allocated new RAMDISK: 008dc000 - 01054427 [ 0.000000] Move RAMDISK from 0000000037877000 - 0000000037fef426 to 008dc000 - 01054426 [ 0.000000] ACPI: RSDP 000f6e30 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 4f6eb5fe 0004C (v01 IBM TP-1V 00001190 LTP 00000000) [ 0.000000] ACPI: FACP 4f6eb700 000F4 (v03 IBM TP-1V 00001190 IBM 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT 4f6eb8e7 0B5A4 (v01 IBM TP-1V 00001190 MSFT 0100000E) [ 0.000000] ACPI: FACS 4f6f8000 00040 [ 0.000000] ACPI: SSDT 4f6eb8b4 00033 (v01 IBM TP-1V 00001190 MSFT 0100000E) [ 0.000000] ACPI: ECDT 4f6f6e8b 00052 (v01 IBM TP-1V 00001190 IBM 00000001) [ 0.000000] ACPI: TCPA 4f6f6edd 00032 (v01 IBM TP-1V 00001190 PTL 00000001) [ 0.000000] ACPI: BOOT 4f6f6fd8 00028 (v01 IBM TP-1V 00001190 LTP 00000001) [ 0.000000] 382MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d7e98] TEXT DATA BSS ==> [0000100000 - 00008d7e98] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008d8000 - 00008db128] BRK ==> [00008d8000 - 00008db128] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008dc000 - 0001054427] NEW RAMDISK ==> [00008dc000 - 0001054427] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0004f6e0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0004f6e0 [ 0.000000] On node 0 totalpages: 325243 [ 0.000000] free_area_init_node: node 0, pgdat c0796720, node_mem_map c1056000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 766 pages used for memmap [ 0.000000] HighMem zone: 97252 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:af800000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s35992 r0 d21352 u4194304 [ 0.000000] pcpu-alloc: s35992 r0 d21352 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322701 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-19-generic root=UUID=de9941b2-380f-4a11-995e-7d75777b52a3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6506880 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0004f6e0) [ 0.000000] Memory: 1266812k/1301376k available (4671k kernel code, 33136k reserved, 2116k data, 656k init, 392072k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a1000 - 0xc0845000 ( 656 kB) [ 0.000000] .data : 0xc058fd43 - 0xc07a0e48 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc058fd43 (4671 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1495.217 MHz processor. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.43 BogoMIPS (lpj=5980868) [ 0.004037] Security Framework initialized [ 0.004079] AppArmor: AppArmor initialized [ 0.004090] Mount-cache hash table entries: 512 [ 0.008070] Initializing cgroup subsys ns [ 0.008078] Initializing cgroup subsys cpuacct [ 0.008084] Initializing cgroup subsys memory [ 0.008096] Initializing cgroup subsys devices [ 0.008100] Initializing cgroup subsys freezer [ 0.008103] Initializing cgroup subsys net_cls [ 0.008137] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008141] CPU: L2 cache: 2048K [ 0.008147] mce: CPU supports 5 MCE banks [ 0.008169] Performance Events: [ 0.008173] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008177] no hardware sampling interrupt available. [ 0.008179] p6 PMU driver. [ 0.008188] ... version: 0 [ 0.008190] ... bit width: 32 [ 0.008193] ... generic registers: 2 [ 0.008196] ... value mask: 00000000ffffffff [ 0.008199] ... max period: 000000007fffffff [ 0.008201] ... fixed-purpose events: 0 [ 0.008204] ... event mask: 0000000000000003 [ 0.008210] Checking 'hlt' instruction... OK. [ 0.025067] SMP alternatives: switching to UP code [ 0.033886] Freeing SMP alternatives: 19k freed [ 0.033898] ACPI: Core revision 20090903 [ 0.054957] ACPI: setting ELCR to 0200 (from 0800) [ 0.056010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.056016] ftrace: allocating 21765 entries in 43 pages [ 0.060084] weird, boot CPU (#0) not listed by the BIOS. [ 0.060089] SMP motherboard not detected. [ 0.060093] Local APIC not detected. Using dummy APIC emulation. [ 0.060096] SMP disabled [ 0.060235] Brought up 1 CPUs [ 0.060239] Total of 1 processors activated (2990.43 BogoMIPS). [ 0.061664] CPU0 attaching NULL sched-domain. [ 0.061846] devtmpfs: initialized [ 0.062293] regulator: core version 0.5 [ 0.062316] Time: 16:09:51 Date: 04/11/10 [ 0.062372] NET: Registered protocol family 16 [ 0.064012] EISA bus registered [ 0.064023] ACPI: bus type pci registered [ 0.064240] PCI: PCI BIOS revision 2.10 entry at 0xfd8e6, last bus=5 [ 0.064243] PCI: Using configuration type 1 for base access [ 0.065440] bio: create slab at 0 [ 0.066754] ACPI: EC: EC description table is found, configuring boot EC [ 0.077364] ACPI: Interpreter enabled [ 0.077371] ACPI: (supports S0 S3 S4 S5) [ 0.077401] ACPI: Using PIC for interrupt routing [ 0.085977] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.085977] ACPI: Power Resource [PUBS] (on) [ 0.089216] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.089245] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.089399] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.089406] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff] [ 0.089412] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807] [ 0.089433] pci 0000:00:02.0: supports D1 [ 0.089453] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.089459] pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff] [ 0.089482] pci 0000:00:02.1: supports D1 [ 0.089552] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.089604] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.089655] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.089712] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff] [ 0.089766] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.089772] pci 0000:00:1d.7: PME# disabled [ 0.089856] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.089861] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.089884] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.089892] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.089899] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.089907] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.089914] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.089922] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.089971] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.090013] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.090020] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] [ 0.090027] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0100c00-0xd0100dff] [ 0.090035] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0100800-0xd01008ff] [ 0.090063] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.090068] pci 0000:00:1f.5: PME# disabled [ 0.090097] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.090105] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.090140] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.090145] pci 0000:00:1f.6: PME# disabled [ 0.090184] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff] [ 0.090202] pci 0000:02:00.0: supports D1 D2 [ 0.090205] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090210] pci 0000:02:00.0: PME# disabled [ 0.090242] pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff] [ 0.090285] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.090289] pci 0000:02:02.0: PME# disabled [ 0.090324] pci 0000:02:08.0: reg 10 32bit mmio: [0xd0201000-0xd0201fff] [ 0.090331] pci 0000:02:08.0: reg 14 io port: [0x7000-0x703f] [ 0.090366] pci 0000:02:08.0: supports D1 D2 [ 0.090369] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090374] pci 0000:02:08.0: PME# disabled [ 0.090404] pci 0000:00:1e.0: transparent bridge [ 0.090409] pci 0000:00:1e.0: bridge io port: [0x3000-0x7fff] [ 0.090415] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff] [ 0.090421] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.090445] pci_bus 0000:00: on NUMA node 0 [ 0.090451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.090539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.096511] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.096736] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.096959] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.097185] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.097406] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.097629] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.097830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.098054] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.098204] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.098215] vgaarb: loaded [ 0.098358] SCSI subsystem initialized [ 0.098407] libata version 3.00 loaded. [ 0.098496] usbcore: registered new interface driver usbfs [ 0.098515] usbcore: registered new interface driver hub [ 0.098546] usbcore: registered new device driver usb [ 0.098703] ACPI: WMI: Mapper loaded [ 0.098705] PCI: Using ACPI for IRQ routing [ 0.098952] NetLabel: Initializing [ 0.098954] NetLabel: domain hash size = 128 [ 0.098957] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.098973] NetLabel: unlabeled traffic allowed by default [ 0.099009] Switching to clocksource tsc [ 0.099996] AppArmor: AppArmor Filesystem Enabled [ 0.099996] pnp: PnP ACPI init [ 0.099996] ACPI: bus type pnp registered [ 0.102124] pnp: PnP ACPI: found 12 devices [ 0.102127] ACPI: ACPI bus type pnp unregistered [ 0.102131] PnPBIOS: Disabled by ACPI PNP [ 0.102144] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.102148] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.102152] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.102156] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.102161] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.102165] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 0.102169] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.102174] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.102178] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.102182] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.102186] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.102190] system 00:00: iomem range 0x100000-0x4fffffff could not be reserved [ 0.102195] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.102204] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.102209] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.102213] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.102217] system 00:02: ioport range 0x1600-0x167f has been reserved [ 0.136935] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 [ 0.136938] pci 0000:02:00.0: IO window: 0x003000-0x0030ff [ 0.136944] pci 0000:02:00.0: IO window: 0x003400-0x0034ff [ 0.136962] pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff [ 0.136967] pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff [ 0.136973] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.136977] pci 0000:00:1e.0: IO window: 0x3000-0x7fff [ 0.136984] pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff [ 0.136989] pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.137005] pci 0000:00:1e.0: setting latency timer to 64 [ 0.137400] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.137404] PCI: setting IRQ 11 as level-triggered [ 0.137410] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.137417] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.137421] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.137425] pci_bus 0000:02: resource 0 io: [0x3000-0x7fff] [ 0.137429] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff] [ 0.137433] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 0.137436] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.137440] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.137444] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff] [ 0.137447] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff] [ 0.137451] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff] [ 0.137455] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff] [ 0.137490] NET: Registered protocol family 2 [ 0.137598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.137979] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.138959] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.139639] TCP: Hash tables configured (established 131072 bind 65536) [ 0.139643] TCP reno registered [ 0.139791] NET: Registered protocol family 1 [ 0.139824] pci 0000:00:02.0: Boot video device [ 0.139914] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.140057] Simple Boot Flag at 0x35 set to 0x1 [ 0.140172] cpufreq-nforce2: No nForce2 chipset. [ 0.140203] Scanning for low memory corruption every 60 seconds [ 0.140373] audit: initializing netlink socket (disabled) [ 0.140399] type=2000 audit(1271002190.136:1): initialized [ 0.154320] Trying to unpack rootfs image as initramfs... [ 0.169619] highmem bounce pool size: 64 pages [ 0.169628] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.177032] VFS: Disk quotas dquot_6.5.2 [ 0.177122] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.177929] fuse init (API version 7.13) [ 0.178048] msgmni has been set to 1710 [ 0.181386] alg: No test for stdrng (krng) [ 0.181476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.181481] io scheduler noop registered [ 0.181483] io scheduler anticipatory registered [ 0.181486] io scheduler deadline registered [ 0.181539] io scheduler cfq registered (default) [ 0.181690] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.181721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.181999] ACPI: AC Adapter [AC] (on-line) [ 0.182088] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.182248] ACPI: Lid Switch [LID] [ 0.182306] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.182313] ACPI: Sleep Button [SLPB] [ 0.182384] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.182388] ACPI: Power Button [PWRF] [ 0.189083] Marking TSC unstable due to TSC halts in idle [ 0.189181] processor LNXCPU:00: registered as cooling_device0 [ 0.190885] Switching to clocksource acpi_pm [ 0.194373] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.194384] ACPI: Thermal Zone [THM0] (39 C) [ 0.196271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.197252] serial 00:09: activated [ 0.197358] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.197869] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.197876] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.197884] serial 0000:00:1f.6: PCI INT B disabled [ 0.199160] brd: module loaded [ 0.199780] loop: module loaded [ 0.199894] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.204180] isapnp: Scanning for PnP cards... [ 0.209787] ata_piix 0000:00:1f.1: version 2.13 [ 0.209799] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.212909] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.212915] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.212996] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.213160] scsi0 : ata_piix [ 0.213776] scsi1 : ata_piix [ 0.214927] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 0.214931] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 0.216164] Fixed MDIO Bus: probed [ 0.216255] PPP generic driver version 2.4.2 [ 0.216343] tun: Universal TUN/TAP device driver, 1.6 [ 0.216346] tun: (C) 1999-2004 Max Krasnyansky [ 0.216544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.283272] ACPI: Battery Slot [BAT0] (battery present) [ 0.283434] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.283834] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.283840] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.283864] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.283869] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.283961] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.284028] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.287897] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.287912] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000 [ 0.312225] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.312406] usb usb1: configuration #1 chosen from 1 choice [ 0.312448] hub 1-0:1.0: USB hub found [ 0.312462] hub 1-0:1.0: 6 ports detected [ 0.312556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.312581] uhci_hcd: USB Universal Host Controller Interface driver [ 0.312879] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.312893] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.312906] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.312911] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.312977] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.313007] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820 [ 0.313127] usb usb2: configuration #1 chosen from 1 choice [ 0.313161] hub 2-0:1.0: USB hub found [ 0.313171] hub 2-0:1.0: 2 ports detected [ 0.313844] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 0.314246] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.314252] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.314260] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.314265] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.314309] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.314332] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840 [ 0.314446] usb usb3: configuration #1 chosen from 1 choice [ 0.314481] hub 3-0:1.0: USB hub found [ 0.314489] hub 3-0:1.0: 2 ports detected [ 0.314545] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.314555] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.314559] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.314602] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.314624] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860 [ 0.314742] usb usb4: configuration #1 chosen from 1 choice [ 0.314781] hub 4-0:1.0: USB hub found [ 0.314790] hub 4-0:1.0: 2 ports detected [ 0.314912] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.368517] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.368529] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.368713] mice: PS/2 mouse device common for all mice [ 0.369468] rtc_cmos 00:06: RTC can wake from S4 [ 0.369532] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.369551] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.369726] device-mapper: uevent: version 1.0.3 [ 0.370980] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.373737] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.374012] device-mapper: multipath: version 1.1.0 loaded [ 0.374017] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.376253] EISA: Probing bus 0 at eisa.0 [ 0.376261] Cannot allocate resource for EISA slot 1 [ 0.376266] Cannot allocate resource for EISA slot 2 [ 0.376268] Cannot allocate resource for EISA slot 3 [ 0.376271] Cannot allocate resource for EISA slot 4 [ 0.376274] Cannot allocate resource for EISA slot 5 [ 0.376277] Cannot allocate resource for EISA slot 6 [ 0.376280] Cannot allocate resource for EISA slot 7 [ 0.376285] EISA: Detected 0 cards. [ 0.377272] cpuidle: using governor ladder [ 0.377352] cpuidle: using governor menu [ 0.377919] TCP cubic registered [ 0.378126] NET: Registered protocol family 10 [ 0.379633] lo: Disabled Privacy Extensions [ 0.380052] NET: Registered protocol family 17 [ 0.380265] P-state transition latency capped at 20 uS [ 0.380565] Using IPI No-Shortcut mode [ 0.380669] PM: Resume from disk failed. [ 0.380690] registered taskstats version 1 [ 0.380927] Magic number: 6:127:186 [ 0.381044] rtc_cmos 00:06: setting system clock to 2010-04-11 16:09:51 UTC (1271002191) [ 0.381049] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.381051] EDD information not available. [ 0.460844] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 1.04, max UDMA/33 [ 0.461049] ata1.00: ATA-6: HTS424030M9AT00, MAAIA70A, max UDMA/100 [ 0.461054] ata1.00: 58605120 sectors, multi 16: LBA [ 0.476470] ata2.00: configured for UDMA/33 [ 0.477143] ata1.00: configured for UDMA/100 [ 0.755367] Freeing initrd memory: 7649k freed [ 0.849840] isapnp: No Plug & Play device found [ 0.850089] scsi 0:0:0:0: Direct-Access ATA HTS424030M9AT00 MAAI PQ: 0 ANSI: 5 [ 0.850310] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 0.850373] sd 0:0:0:0: [sda] Write Protect is off [ 0.850377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.850409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.850635] sda: [ 0.850858] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.855304] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N 1.04 PQ: 0 ANSI: 5 [ 0.866362] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.866367] Uniform CD-ROM driver Revision: 3.20 [ 0.866496] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.866557] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.874569] sda1 [ 0.874833] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.874854] Freeing unused kernel memory: 656k freed [ 0.875410] Write protecting the kernel text: 4672k [ 0.875459] Write protecting the kernel read-only data: 1836k [ 0.895755] udev: starting version 151 [ 1.143289] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.143294] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.143796] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 1.143802] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 1.167406] e100 0000:02:08.0: PME# disabled [ 1.173058] e100: eth0: e100_probe: addr 0xd0201000, irq 11, MAC addr 00:0d:60:fe:2e:93 [ 1.205633] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 24.580975] udev: starting version 151 [ 24.941611] lp: driver loaded but no devices found [ 24.996121] Linux agpgart interface v0.103 [ 25.015210] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 25.016303] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5 [ 25.016375] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 25.039488] intel_rng: FWH not detected [ 25.076893] Non-volatile memory driver v1.3 [ 25.166393] [drm] Initialized drm 1.1.0 20060810 [ 25.207381] irda_init() [ 25.207474] NET: Registered protocol family 23 [ 25.216168] parport_pc 00:0a: reported by Plug and Play ACPI [ 25.216208] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 25.228244] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 25.229132] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 25.273173] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 25.306647] lp0: using parport0 (interrupt-driven). [ 25.309467] ppdev: user-space parallel port driver [ 25.309761] type=1505 audit(1271002216.426:2): operation="profile_load" pid=504 name="/sbin/dhclient3" [ 25.310557] type=1505 audit(1271002216.426:3): operation="profile_load" pid=504 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.310993] type=1505 audit(1271002216.426:4): operation="profile_load" pid=504 name="/usr/lib/connman/scripts/dhclient-script" [ 25.312754] nsc-ircc 00:0b: activated [ 25.312760] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 25.312965] nsc-ircc, chip->init [ 25.312974] nsc-ircc, Found chip at base=0x02e [ 25.312997] nsc-ircc, driver loaded (Dag Brattli) [ 25.314326] IrDA: Registered device irda0 [ 25.314331] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 25.356750] lib80211: common routines for IEEE802.11 drivers [ 25.356756] lib80211_crypt: registered algorithm 'NULL' [ 25.477017] i915 0000:00:02.0: power state changed by ACPI to D0 [ 25.477032] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 25.477040] i915 0000:00:02.0: setting latency timer to 64 [ 25.493356] [drm] set up 7M of stolen space [ 25.519480] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 25.519486] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 25.532131] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512] [ 25.532151] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI [ 25.532154] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI [ 25.532161] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64 [ 25.573068] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 25.573073] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 25.628459] [drm] initialized overlay support [ 25.946666] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.030063] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 26.030072] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 26.032643] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0470, PCI irq 11 [ 26.032649] yenta_cardbus 0000:02:00.0: Socket status: 30000007 [ 26.032658] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 26.032664] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: clean. [ 26.034052] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff [ 26.034056] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff [ 26.044276] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 [ 26.044283] ipw2200 0000:02:02.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 [ 26.057959] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 26.058021] ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw [ 26.074028] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 26.284498] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 26.286102] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 26.286106] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 26.286109] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 26.362704] Adding 1048568k swap on /mnt/1024Mb.swap. Priority:-1 extents:4 across:14942200k [ 26.386460] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 26.386465] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 26.386468] thinkpad_acpi: ThinkPad BIOS 1VET61WW (1.19 ), EC 1VHT27WW-1.03 [ 26.386471] thinkpad_acpi: IBM ThinkPad R51, model 28838QU [ 26.386474] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware [ 26.386477] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features [ 26.396273] Registered led device: tpacpi::thinklight [ 26.396894] Registered led device: tpacpi::power [ 26.397108] Registered led device: tpacpi::standby [ 26.401600] thinkpad_acpi: brightness: will use unverified default: brightness_mode=3 [ 26.401605] thinkpad_acpi: brightness: please report to ibm-acpi-devel@lists.sourceforge.net whether it works well or not on your ThinkPad [ 26.408213] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 26.418174] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 26.470077] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 26.470888] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 26.471249] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 26.471556] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 26.472545] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 26.492697] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 26.510153] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.608086] type=1505 audit(1271002217.726:5): operation="profile_load" pid=744 name="/usr/share/gdm/guest-session/Xsession" [ 26.610121] type=1505 audit(1271002217.726:6): operation="profile_replace" pid=745 name="/sbin/dhclient3" [ 26.610937] type=1505 audit(1271002217.726:7): operation="profile_replace" pid=745 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 26.611553] type=1505 audit(1271002217.726:8): operation="profile_replace" pid=745 name="/usr/lib/connman/scripts/dhclient-script" [ 26.616893] type=1505 audit(1271002217.734:9): operation="profile_load" pid=746 name="/usr/bin/evince" [ 26.627711] type=1505 audit(1271002217.742:10): operation="profile_load" pid=746 name="/usr/bin/evince-previewer" [ 26.634537] type=1505 audit(1271002217.750:11): operation="profile_load" pid=746 name="/usr/bin/evince-thumbnailer" [ 27.237822] fb0: inteldrmfb frame buffer device [ 27.237826] registered panic notifier [ 27.237837] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 27.237890] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 27.237925] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 27.245854] vga16fb: initializing [ 27.245860] vga16fb: mapped to 0xc00a0000 [ 27.245864] vga16fb: not registering due to another framebuffer present