Linux version 2.6.16-berry (root@mai.yui.mine.nu) (gcc バージョン 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Thu Jun 15 12:55:04 JST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable) BIOS-e820: 0000000027ff0000 - 0000000027ff8000 (ACPI data) BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 639MB LOWMEM available. found SMP MP-table at 000fb820 On node 0 totalpages: 163824 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 159728 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa5a0 ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x27ff0000 ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x27ff0030 ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x27ff00c0 ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 28000000:d6c00000) Built 1 zonelists Kernel command line: ro boot=cdrom berry_dir=/BERRY/BERRY video=vesa:ywrap,mtrr vga=791 splash=silent overlay=ram lang=us bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1500.190 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 645116k/655296k available (1512k kernel code, 9632k reserved, 565k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3005.02 BogoMIPS (lpj=6010051) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. CPU0: AMD Sempron(tm) 2200+ stepping 01 Total of 1 processors activated (3005.02 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 833k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by vt8235 PM PCI quirk: region 0400-040f claimed by vt8235 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: dde00000-dfefffff PREFETCH window: cdd00000-ddcfffff PCI: Setting latency timer of device 0000:00:01.0 to 64 audit: initializing netlink socket (disabled) audit(1152472531.676:1): initialized SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xd0000000, mapped to 0xe8880000, using 6144k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:e4e0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 38404 bytes,<6>...found (1024x768, 41673 bytes, v3). Console: switching to colour frame buffer device 118x38 fb0: VESA VGA frame buffer device serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST320413A, ATA DISK drive hdb: ST380011A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TSSTcorpCD-R/RW SH-R522C, ATAPI CD/DVD-ROM drive hdd: GCR-8523B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hdb: max request size: 512KiB hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 > mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 169, io mem 0xdffeff00 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 9 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 169, io base 0x0000e000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 9 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 169, io base 0x0000e400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 9 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 169, io base 0x0000e800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver loop: loaded (max 8 devices) hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA NTFS driver 2.1.26 [Flags: R/W MODULE]. ieee1394: Initialized config rom entry `ip1394' sbp2: Unknown parameter `sbp2_serialize_io' Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! Unable to identify CD-ROM format. VFS: Can't find ext3 filesystem on dev hda. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev hda. NTFS-fs warning (device hda): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device hda): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device hda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device hda): ntfs_fill_super(): Not an NTFS volume. VFS: Can't find an ext2 filesystem on dev hda. ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda Unable to identify CD-ROM format. VFS: Can't find ext3 filesystem on dev hdb. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev hdb. NTFS-fs warning (device hdb): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device hdb): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device hdb): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device hdb): ntfs_fill_super(): Not an NTFS volume. VFS: Can't find an ext2 filesystem on dev hdb. ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root squashfs: version 3.0 (2006/03/15) Phillip Lougher Registering unionfs 1.1.4 Freeing unused kernel memory: 176k freed Linux agpgart interface v0.101 (c) Dave Jones via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177 eth0: VIA Rhine II at 0x1d800, 00:14:2a:0e:5b:76, IRQ 177. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. agpgart: Detected VIA KM400/KM400A chipset agpgart: AGP aperture is 64M @ 0xe0000000 input: PS/2 Generic Mouse as /class/input/input1 psmouse.c: Failed to enable mouse on isa0060/serio1 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:11.5 to 64 nvidia: module license 'NVIDIA' taints kernel. ts: Compaq touchscreen protocol output ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 Real Time Clock Driver v1.12ac ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports 16 throttling states) NTFS volume version 3.1. NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs error (device hda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. NTFS volume version 3.1. NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs error (device hda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. NTFS volume version 3.1. NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs error (device hda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. NTFS volume version 3.1. NTFS volume version 3.1. NTFS volume version 3.1. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Adding 1052248k swap on /dev/hdb2. Priority:-1 extents:1 across:1052248k FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 [drm] Initialized drm 1.0.1 20051102 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present