[4294667.296000] Linux version 2.6.15-21-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Apr 21 16:43:33 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[4294667.296000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 126960 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f6b50
[4294667.296000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[4294667.296000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[4294667.296000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff79c0
[4294667.296000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:10 APIC version 16
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: BIOS IRQ0 pin2 override ignored.
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/install/vmlinuz boot=casper initrd=/install/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- vga=0x324
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1789.235 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour dummy device 80x25
[4294668.647000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.648000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.660000] Memory: 508596k/524224k available (1974k kernel code, 14988k reserved, 604k data, 288k init, 0k highmem)
[4294668.660000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.720000] Calibrating delay using timer specific routine.. 3580.64 BogoMIPS (lpj=1790323)
[4294668.720000] Security Framework v1.0.0 initialized
[4294668.720000] SELinux:  Disabled at boot.
[4294668.720000] Mount-cache hash table entries: 512
[4294668.720000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[4294668.720000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[4294668.720000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294668.720000] CPU: L2 Cache: 512K (64 bytes/line)
[4294668.720000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
[4294668.720000] mtrr: v2.0 (20020519)
[4294668.720000] CPU: AMD Athlon(tm)  stepping 00
[4294668.720000] Enabling fast FPU save and restore... done.
[4294668.720000] Enabling unmasked SIMD FPU exception support... done.
[4294668.720000] Checking 'hlt' instruction... OK.
[4294668.724000] checking if image is initramfs... it is
[4294669.314000] Freeing initrd memory: 6798k freed
[4294669.328000] ACPI: Looking for DSDT ... not found!
[4294669.349000] ENABLING IO-APIC IRQs
[4294669.350000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[4294669.461000] NET: Registered protocol family 16
[4294669.461000] EISA bus registered
[4294669.461000] ACPI: bus type pci registered
[4294669.461000] PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2
[4294669.461000] PCI: Using configuration type 1
[4294669.461000] ACPI: Subsystem revision 20051216
[4294669.468000] ACPI: Interpreter enabled
[4294669.468000] ACPI: Using IOAPIC for interrupt routing
[4294669.469000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.469000] PCI: Probing PCI hardware (bus 00)
[4294669.473000] PCI: nForce2 C1 Halt Disconnect fixup
[4294669.474000] Boot video device is 0000:02:00.0
[4294669.474000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.548000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294669.548000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[4294669.550000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294669.550000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.550000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.551000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[4294669.551000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.552000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294669.552000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294669.553000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294669.553000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294669.553000] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294669.554000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.554000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[4294669.555000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[4294669.555000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.556000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.556000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.556000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[4294669.557000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[4294669.557000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[4294669.558000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[4294669.558000] ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
[4294669.558000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[4294669.559000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[4294669.559000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[4294669.560000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[4294669.560000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[4294669.561000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[4294669.561000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[4294669.562000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[4294669.562000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[4294669.562000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[4294669.563000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[4294669.566000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.566000] pnp: PnP ACPI init
[4294669.572000] pnp: PnP ACPI: found 11 devices
[4294669.572000] PnPBIOS: Disabled by ACPI PNP
[4294669.572000] PCI: Using ACPI for IRQ routing
[4294669.572000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294669.604000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[4294669.604000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[4294669.604000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[4294669.604000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[4294669.604000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[4294669.604000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[4294669.604000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[4294669.604000] pnp: 00:01: ioport range 0x5100-0x513f has been reserved
[4294669.604000] PCI: Bridge: 0000:00:08.0
[4294669.604000]   IO window: a000-bfff
[4294669.604000]   MEM window: e6000000-e7ffffff
[4294669.604000]   PREFETCH window: 30000000-300fffff
[4294669.604000] PCI: Bridge: 0000:00:1e.0
[4294669.604000]   IO window: c000-cfff
[4294669.604000]   MEM window: e4000000-e5ffffff
[4294669.604000]   PREFETCH window: d0000000-dfffffff
[4294669.604000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[4294669.605000] audit: initializing netlink socket (disabled)
[4294669.605000] audit(1146512238.604:1): initialized
[4294669.605000] VFS: Disk quotas dquot_6.5.1
[4294669.605000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.605000] Initializing Cryptographic API
[4294669.605000] io scheduler noop registered
[4294669.605000] io scheduler anticipatory registered
[4294669.605000] io scheduler deadline registered
[4294669.605000] io scheduler cfq registered
[4294669.605000] isapnp: Scanning for PnP cards...
[4294669.962000] isapnp: No Plug & Play device found
[4294669.976000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[4294669.976000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[4294669.977000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.977000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.977000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294669.979000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294669.979000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.979000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.980000] mice: PS/2 mouse device common for all mice
[4294669.980000] EISA: Probing bus 0 at eisa.0
[4294669.980000] Cannot allocate resource for EISA slot 4
[4294669.980000] Cannot allocate resource for EISA slot 5
[4294669.980000] EISA: Detected 0 cards.
[4294669.980000] NET: Registered protocol family 2
[4294669.990000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[4294669.990000] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.990000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.990000] TCP: Hash tables configured (established 32768 bind 32768)
[4294669.990000] TCP reno registered
[4294669.990000] TCP bic registered
[4294669.990000] NET: Registered protocol family 1
[4294669.990000] NET: Registered protocol family 8
[4294669.990000] NET: Registered protocol family 20
[4294669.990000] Using IPI Shortcut mode
[4294669.990000] ACPI wakeup devices: 
[4294669.990000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI 
[4294669.990000] ACPI: (supports S0 S1 S4 S5)
[4294669.990000] Freeing unused kernel memory: 288k freed
[4294670.057000] vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 10240k, total 131072k
[4294670.057000] vesafb: mode is 1280x1024x32, linelength=5120, pages=24
[4294670.057000] vesafb: protected mode interface info at c000:557a
[4294670.057000] vesafb: scrolling: redraw
[4294670.057000] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[4294670.057000] vesafb: Mode is VGA compatible
[4294670.203000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.226000] Console: switching to colour frame buffer device 160x64
[4294670.226000] fb0: VESA VGA frame buffer device
[4294671.437000] Capability LSM initialized
[4294671.464000] ACPI: Fan [FAN] (on)
[4294671.473000] ACPI: Thermal Zone [THRM] (50 C)
[4294671.836000] SCSI subsystem initialized
[4294671.838000] libata version 1.20 loaded.
[4294671.840000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[4294671.840000] NFORCE2: chipset revision 162
[4294671.840000] NFORCE2: not 100% native mode: will probe irqs later
[4294671.840000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[4294671.840000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[4294671.840000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[4294671.840000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[4294671.840000] Probing IDE interface ide0...
[4294672.104000] hda: WDC WD800JB-00FSA0, ATA DISK drive
[4294672.717000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294672.733000] Probing IDE interface ide1...
[4294673.405000] hdc: ASUS CD-S520/A, ATAPI CD/DVD-ROM drive
[4294674.119000] hdd: LITE-ON LTR-48126S, ATAPI CD/DVD-ROM drive
[4294674.173000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.185000] hda: max request size: 1024KiB
[4294674.195000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[4294674.197000] hda: cache flushes supported
[4294674.197000]  hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
[4294674.258000]  hda1: <bsd: hda8 hda9 >
[4294674.261000] hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
[4294674.261000] Uniform CD-ROM driver Revision: 3.20
[4294674.278000] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294674.657000] usbcore: registered new driver usbfs
[4294674.657000] usbcore: registered new driver hub
[4294674.658000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294674.658000] **** SET: Misaligned resource pointer: dfabec02 Type 07 Len 0
[4294674.659000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[4294674.659000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 177
[4294674.659000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294674.659000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[4294674.659000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[4294674.659000] ohci_hcd 0000:00:02.0: irq 177, io mem 0xe8080000
[4294674.712000] hub 1-0:1.0: USB hub found
[4294674.712000] hub 1-0:1.0: 3 ports detected
[4294674.813000] **** SET: Misaligned resource pointer: dfabe902 Type 07 Len 0
[4294674.813000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[4294674.813000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 185
[4294674.813000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[4294674.813000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[4294674.813000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[4294674.813000] ohci_hcd 0000:00:02.1: irq 185, io mem 0xe8083000
[4294674.866000] hub 2-0:1.0: USB hub found
[4294674.866000] hub 2-0:1.0: 3 ports detected
[4294674.968000] **** SET: Misaligned resource pointer: dfabe602 Type 07 Len 0
[4294674.968000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[4294674.968000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 193
[4294674.968000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[4294674.968000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[4294674.968000] ehci_hcd 0000:00:02.2: debug port 1
[4294674.968000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[4294674.968000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[4294674.968000] ehci_hcd 0000:00:02.2: irq 193, io mem 0xe8084000
[4294674.968000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294674.969000] hub 3-0:1.0: USB hub found
[4294674.969000] hub 3-0:1.0: 6 ports detected
[4294675.539000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[4294675.554000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294675.554000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294675.554000] ide: failed opcode was: unknown
[4294675.554000] end_request: I/O error, dev hdc, sector 1268608
[4294675.554000] Buffer I/O error on device hdc, logical block 158576
[4294675.589000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294675.589000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294675.589000] ide: failed opcode was: unknown
[4294675.589000] end_request: I/O error, dev hdc, sector 1268608
[4294675.589000] Buffer I/O error on device hdc, logical block 158576
[4294675.624000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294675.624000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294675.624000] ide: failed opcode was: unknown
[4294675.624000] end_request: I/O error, dev hdc, sector 1268608
[4294675.624000] Buffer I/O error on device hdc, logical block 158576
[4294675.659000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294675.659000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294675.659000] ide: failed opcode was: unknown
[4294675.659000] end_request: I/O error, dev hdc, sector 1268608
[4294675.659000] Buffer I/O error on device hdc, logical block 158576
[4294675.694000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294675.694000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294675.694000] ide: failed opcode was: unknown
[4294675.694000] end_request: I/O error, dev hdc, sector 1268608
[4294675.694000] Buffer I/O error on device hdc, logical block 158576
[4294675.697000] usbcore: registered new driver hiddev
[4294675.709000] input: Microsoft Basic Optical Mouse as /class/input/input1
[4294675.709000] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.0-1
[4294675.709000] usbcore: registered new driver usbhid
[4294675.709000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294675.729000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294675.729000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294675.729000] ide: failed opcode was: unknown
[4294675.729000] end_request: I/O error, dev hdc, sector 1268608
[4294675.729000] Buffer I/O error on device hdc, logical block 158576
[4294676.036000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294676.070000] ISO 9660 Extensions: RRIP_1991A
[4294676.099000] loop: loaded (max 8 devices)
[4294676.110000] Registering unionfs 1.1.2
[4294676.218000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294720.234000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
[4294720.234000] **** SET: Misaligned resource pointer: dfb25ca2 Type 07 Len 0
[4294720.235000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[4294720.235000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 177
[4294720.235000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[4294720.250000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294720.747000] eth0: forcedeth.c: subsystem: 0147b:1c00 bound to 0000:00:04.0
[4294720.747000] 8139cp: pci dev 0000:01:08.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294720.747000] 8139cp: Try the "8139too" driver instead.
[4294720.749000] 8139too Fast Ethernet driver 0.9.27
[4294720.749000] **** SET: Misaligned resource pointer: dfb25ca2 Type 07 Len 0
[4294720.750000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[4294720.750000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 201
[4294720.750000] eth1: RealTek RTL8139 at 0xe1294000, 00:e0:4d:07:98:ca, IRQ 201
[4294720.750000] eth1:  Identified 8139 chip type 'RTL-8100'
[4294732.179000] ts: Compaq touchscreen protocol output
[4294732.497000] eth0: no link during initialization.
[4294733.084000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294733.229000] Linux agpgart interface v0.101 (c) Dave Jones
[4294733.256000] agpgart: Detected NVIDIA nForce2 chipset
[4294733.260000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294734.554000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[4294734.555000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
[4294734.670000] NET: Registered protocol family 17
[4294734.788000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294735.025000] Floppy drive(s): fd0 is 1.44M
[4294735.074000] FDC 0 is a post-1991 82077
[4294735.436000] Real Time Clock Driver v1.12
[4294735.608000] input: PC Speaker as /class/input/input2
[4294735.751000] parport: PnPBIOS parport detected.
[4294735.752000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294735.876000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294736.489000] **** SET: Misaligned resource pointer: d70e43c2 Type 07 Len 0
[4294736.489000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[4294736.489000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 185
[4294736.489000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[4294736.855000] intel8x0_measure_ac97_clock: measured 50167 usecs
[4294736.855000] intel8x0: clocking to 47371
[4294738.678000] Adding 514040k swap on /dev/hda7.  Priority:-1 extents:1 across:514040k
[4294738.937000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294738.937000] md: bitmap version 4.39
[4294739.614000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294742.384000] NET: Registered protocol family 10
[4294742.384000] lo: Disabled Privacy Extensions
[4294742.385000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294742.385000] IPv6 over IPv4 tunneling driver
[4294744.345000] cdrom: open failed.
[4294750.000000] ACPI: Power Button (FF) [PWRF]
[4294750.000000] ACPI: Power Button (CM) [PWRB]
[4294750.103000] ibm_acpi: ec object not found
[4294750.126000] pcc_acpi: loading...
[4294753.144000] eth1: no IPv6 routers present
[4294767.349000] [drm] Initialized drm 1.0.0 20040925
[4294767.604000] **** SET: Misaligned resource pointer: d6a8dea2 Type 07 Len 0
[4294767.605000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[4294767.605000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 209
[4294767.605000] [drm] Initialized radeon 1.19.0 20050911 on minor 0: 
[4294769.248000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294769.248000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4294769.248000] agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
[4294769.818000] [drm] Loading R200 Microcode
[4294776.386000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294776.386000] apm: overridden by ACPI.
[4294792.118000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294792.118000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294792.118000] ide: failed opcode was: 0xec
[4294792.912000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294792.912000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294792.912000] ide: failed opcode was: 0xec
[4294794.014000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294794.014000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294794.014000] ide: failed opcode was: 0xec
[4294794.661000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294794.661000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294794.661000] ide: failed opcode was: 0xec
[4294799.696000] Bluetooth: Core ver 2.8
[4294799.696000] NET: Registered protocol family 31
[4294799.696000] Bluetooth: HCI device and connection manager initialized
[4294799.696000] Bluetooth: HCI socket layer initialized
[4294800.400000] Bluetooth: L2CAP ver 2.8
[4294800.400000] Bluetooth: L2CAP socket layer initialized
[4294802.125000] Bluetooth: RFCOMM socket layer initialized
[4294802.125000] Bluetooth: RFCOMM TTY layer initialized
[4294802.125000] Bluetooth: RFCOMM ver 1.7
[4295424.822000] kjournald starting.  Commit interval 5 seconds
[4295424.822000] EXT3 FS on hda5, internal journal
[4295424.822000] EXT3-fs: mounted filesystem with ordered data mode.
[4295531.750000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4295531.750000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4295531.750000] agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
[4295531.750000] [drm] Loading R200 Microcode
[4295605.995000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4295605.995000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4295605.995000] agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
[4295605.995000] [drm] Loading R200 Microcode
[4295612.401000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4295612.401000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4295612.401000] agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
[4295612.679000] [drm] Loading R200 Microcode
[4295627.080000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4295627.080000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4295627.080000] agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
[4295627.080000] [drm] Loading R200 Microcode
[4295668.826000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4295668.826000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4295668.827000] agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
[4295669.108000] [drm] Loading R200 Microcode