[72221.712061] r8169 0000:02:00.0: System wakeup disabled by ACPI [72221.715796] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [72221.715826] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [72221.715993] sd 0:0:0:0: [sda] Starting disk [72221.821179] r8169 0000:02:00.0 enp2s0: link down [72221.854991] rtc_cmos 00:02: System wakeup disabled by ACPI [72222.030743] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [72222.030784] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [72222.032381] ata3.00: configured for UDMA/100 [72222.046745] usb 3-1: reset high-speed USB device number 2 using ehci-pci [72222.046817] usb 4-1: reset high-speed USB device number 2 using ehci-pci [72222.646427] usb 4-1.6: reset low-speed USB device number 17 using ehci-pci [72222.935784] PM: resume of devices complete after 1224.606 msecs [72222.935963] PM: Finishing wakeup. [72222.935964] Restarting tasks ... done. [72223.006196] usb 4-1.5: new high-speed USB device number 21 using ehci-pci [72223.148223] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [72223.256171] r8169 0000:02:00.0 enp2s0: link down [72223.256226] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [72223.257003] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [72223.275485] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [72223.350586] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [72223.356445] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [72223.356448] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [72223.356451] usb 4-1.5: Product: USB2.0-CRW [72223.356453] usb 4-1.5: Manufacturer: Generic [72223.356455] usb 4-1.5: SerialNumber: 20090516388200000 [72223.362247] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [72223.381117] scsi host26: usb-storage 4-1.5:1.0 [72223.537631] usb 4-1.5: USB disconnect, device number 21 [72223.717839] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [72223.718812] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [72223.718815] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [72223.718817] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [72223.720650] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [72223.720652] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [72223.720654] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [72223.721532] ata1.00: configured for UDMA/133 [72224.325072] wlp3s0: authenticate with c0:25:06:d5:f2:ad [72224.339770] wlp3s0: send auth to c0:25:06:d5:f2:ad (try 1/3) [72224.342799] wlp3s0: authenticated [72224.345481] wlp3s0: associate with c0:25:06:d5:f2:ad (try 1/3) [72224.352134] wlp3s0: RX AssocResp from c0:25:06:d5:f2:ad (capab=0x431 status=0 aid=1) [72224.352231] wlp3s0: associated [72224.352241] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [72224.355560] ath: EEPROM regdomain: 0x8114 [72224.355563] ath: EEPROM indicates we should expect a country code [72224.355565] ath: doing EEPROM country->regdmn map search [72224.355566] ath: country maps to regdmn code: 0x37 [72224.355568] ath: Country alpha2 being used: DE [72224.355569] ath: Regpair used: 0x37 [72224.355571] ath: regdomain 0x8114 dynamically updated by country IE [72224.355592] cfg80211: Regulatory domain changed to country: DE [72224.355593] cfg80211: DFS Master region: ETSI [72224.355595] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [72224.355597] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [72224.355600] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [72224.355602] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [72224.355604] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [72224.355605] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [72250.695584] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [72250.695620] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [79600.543464] sr 2:0:0:0: [sr0] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [79600.543469] sr 2:0:0:0: [sr0] tag#5 Sense Key : Not Ready [current] [79600.543472] sr 2:0:0:0: [sr0] tag#5 Add. Sense: Medium not present - tray closed [79600.543475] sr 2:0:0:0: [sr0] tag#5 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [79600.543478] blk_update_request: I/O error, dev sr0, sector 0 [79600.555485] sr 2:0:0:0: [sr0] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [79600.555489] sr 2:0:0:0: [sr0] tag#6 Sense Key : Not Ready [current] [79600.555492] sr 2:0:0:0: [sr0] tag#6 Add. Sense: Medium not present - tray closed [79600.555495] sr 2:0:0:0: [sr0] tag#6 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00 [79600.555497] blk_update_request: I/O error, dev sr0, sector 0 [79600.555499] Buffer I/O error on dev sr0, logical block 0, async page read [79600.603450] sr 2:0:0:0: [sr0] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [79600.603455] sr 2:0:0:0: [sr0] tag#13 Sense Key : Not Ready [current] [79600.603459] sr 2:0:0:0: [sr0] tag#13 Add. Sense: Medium not present - tray closed [79600.603462] sr 2:0:0:0: [sr0] tag#13 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00 [79600.603464] blk_update_request: I/O error, dev sr0, sector 0 [79600.616536] sr 2:0:0:0: [sr0] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [79600.616540] sr 2:0:0:0: [sr0] tag#14 Sense Key : Not Ready [current] [79600.616543] sr 2:0:0:0: [sr0] tag#14 Add. Sense: Medium not present - tray closed [79600.616546] sr 2:0:0:0: [sr0] tag#14 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00 [79600.616548] blk_update_request: I/O error, dev sr0, sector 0 [79600.616551] Buffer I/O error on dev sr0, logical block 0, async page read [83021.128839] wlp3s0: AP c0:25:06:d5:f2:ad changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [83320.901659] wlp3s0: AP c0:25:06:d5:f2:ad changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz) [83321.925112] wlp3s0: AP c0:25:06:d5:f2:ad changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [83322.948663] wlp3s0: AP c0:25:06:d5:f2:ad changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz) [85355.892925] wlp3s0: deauthenticating from c0:25:06:d5:f2:ad by local choice (Reason: 3=DEAUTH_LEAVING) [85355.895414] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.895495] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.895551] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.895662] pci_bus 0000:02: Allocating resources [85355.895680] pci_bus 0000:03: Allocating resources [85355.895694] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.895789] pci_bus 0000:01: Allocating resources [85355.895794] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.895833] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.895844] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.895907] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [85355.904352] cfg80211: World regulatory domain updated: [85355.904355] cfg80211: DFS Master region: unset [85355.904356] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [85355.904358] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [85355.904360] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [85355.904361] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [85355.904362] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [85355.904364] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [85355.904365] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [85355.904366] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [85355.904367] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [85356.124762] PM: Syncing filesystems ... done. [85356.442948] PM: Preparing system for sleep (mem) [85356.769289] Freezing user space processes ... (elapsed 0.002 seconds) done. [85356.771346] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [85356.772555] PM: Suspending system (mem) [85356.772570] Suspending console(s) (use no_console_suspend to debug) [85356.772828] sd 0:0:0:0: [sda] Synchronizing SCSI cache [85356.772959] sd 0:0:0:0: [sda] Stopping disk [85357.382616] PM: suspend of devices complete after 610.238 msecs [85357.398636] PM: late suspend of devices complete after 16.014 msecs [85357.400522] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [85357.400655] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [85357.401650] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [85357.401689] r8169 0000:02:00.0: System wakeup enabled by ACPI [85357.414766] PM: noirq suspend of devices complete after 16.135 msecs [85357.414976] ACPI: Preparing to enter system sleep state S3 [85357.442506] ACPI : EC: EC stopped [85357.442507] PM: Saving platform NVS memory [85357.442547] Disabling non-boot CPUs ... [85357.443819] smpboot: CPU 1 is now offline [85357.464207] smpboot: CPU 2 is now offline [85357.484142] smpboot: CPU 3 is now offline [85357.504086] smpboot: CPU 4 is now offline [85357.524042] smpboot: CPU 5 is now offline [85357.543013] Broke affinity for irq 23 [85357.543018] Broke affinity for irq 26 [85357.544045] smpboot: CPU 6 is now offline [85357.562977] Broke affinity for irq 16 [85357.562984] Broke affinity for irq 23 [85357.562988] Broke affinity for irq 26 [85357.564001] smpboot: CPU 7 is now offline [85357.580078] ACPI: Low-level resume complete [85357.580123] ACPI : EC: EC started [85357.580124] PM: Restoring platform NVS memory [85357.581100] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [85357.581234] Enabling non-boot CPUs ... [85357.581283] x86: Booting SMP configuration: [85357.581284] smpboot: Booting Node 0 Processor 1 APIC 0x2 [85357.582680] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [85357.597001] cache: parent cpu1 should not be sleeping [85357.597150] CPU1 is up [85357.597175] smpboot: Booting Node 0 Processor 2 APIC 0x4 [85357.598571] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [85357.613022] cache: parent cpu2 should not be sleeping [85357.613163] CPU2 is up [85357.613187] smpboot: Booting Node 0 Processor 3 APIC 0x6 [85357.614585] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [85357.629065] cache: parent cpu3 should not be sleeping [85357.629209] CPU3 is up [85357.629233] smpboot: Booting Node 0 Processor 4 APIC 0x1 [85357.640985] cache: parent cpu4 should not be sleeping [85357.641086] CPU4 is up [85357.641104] smpboot: Booting Node 0 Processor 5 APIC 0x3 [85357.653004] cache: parent cpu5 should not be sleeping [85357.653105] CPU5 is up [85357.653122] smpboot: Booting Node 0 Processor 6 APIC 0x5 [85357.665029] cache: parent cpu6 should not be sleeping [85357.665126] CPU6 is up [85357.665144] smpboot: Booting Node 0 Processor 7 APIC 0x7 [85357.677095] cache: parent cpu7 should not be sleeping [85357.677195] CPU7 is up [85357.684373] ACPI: Waking up from system sleep state S3 [85357.996850] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [85357.996931] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [85357.997137] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [85357.997171] PM: noirq resume of devices complete after 16.325 msecs [85357.997542] PM: early resume of devices complete after 0.357 msecs [85357.997632] usb usb1: root hub lost power or was reset [85357.997634] usb usb2: root hub lost power or was reset [85357.997641] usb usb3: root hub lost power or was reset [85357.997649] usb usb4: root hub lost power or was reset [85357.997751] r8169 0000:02:00.0: System wakeup disabled by ACPI [85357.997801] ath: phy0: ASPM enabled: 0x43 [85358.001542] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [85358.001544] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [85358.001828] sd 0:0:0:0: [sda] Starting disk [85358.122800] r8169 0000:02:00.0 enp2s0: link down [85358.140642] rtc_cmos 00:02: System wakeup disabled by ACPI [85358.316523] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [85358.320389] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [85358.322014] ata3.00: configured for UDMA/100 [85358.332404] usb 4-1: reset high-speed USB device number 2 using ehci-pci [85358.332409] usb 3-1: reset high-speed USB device number 2 using ehci-pci [85358.932073] usb 4-1.6: reset low-speed USB device number 17 using ehci-pci [85359.221382] PM: resume of devices complete after 1224.482 msecs [85359.221602] PM: Finishing wakeup. [85359.221603] Restarting tasks ... done. [85359.315827] usb 4-1.5: new high-speed USB device number 22 using ehci-pci [85359.426177] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [85359.541904] r8169 0000:02:00.0 enp2s0: link down [85359.541973] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [85359.542772] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [85359.561280] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [85359.623807] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [85359.670948] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [85359.670952] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [85359.670954] usb 4-1.5: Product: USB2.0-CRW [85359.670955] usb 4-1.5: Manufacturer: Generic [85359.670956] usb 4-1.5: SerialNumber: 20090516388200000 [85359.677990] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [85359.697851] scsi host27: usb-storage 4-1.5:1.0 [85359.825382] usb 4-1.5: USB disconnect, device number 22 [85360.007487] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [85360.008467] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [85360.008471] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [85360.008474] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [85360.010439] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [85360.010442] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [85360.010444] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [85360.011288] ata1.00: configured for UDMA/133 [85360.599267] wlp3s0: authenticate with c0:25:06:d5:f2:ad [85360.614129] wlp3s0: send auth to c0:25:06:d5:f2:ad (try 1/3) [85360.617236] wlp3s0: authenticated [85360.619150] wlp3s0: associate with c0:25:06:d5:f2:ad (try 1/3) [85360.626604] wlp3s0: RX AssocResp from c0:25:06:d5:f2:ad (capab=0x431 status=0 aid=2) [85360.626719] wlp3s0: associated [85360.626744] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [85360.629004] ath: EEPROM regdomain: 0x8114 [85360.629007] ath: EEPROM indicates we should expect a country code [85360.629008] ath: doing EEPROM country->regdmn map search [85360.629009] ath: country maps to regdmn code: 0x37 [85360.629010] ath: Country alpha2 being used: DE [85360.629010] ath: Regpair used: 0x37 [85360.629011] ath: regdomain 0x8114 dynamically updated by country IE [85360.629031] cfg80211: Regulatory domain changed to country: DE [85360.629032] cfg80211: DFS Master region: ETSI [85360.629033] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [85360.629035] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [85360.629037] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [85360.629038] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [85360.629039] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [85360.629040] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [85386.985169] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [85386.985177] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [92253.701781] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400 [92253.701819] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up [92253.724789] ath: phy0: Failed to stop TX DMA, queues=0x00a! [100476.154460] wlp3s0: deauthenticating from c0:25:06:d5:f2:ad by local choice (Reason: 3=DEAUTH_LEAVING) [100476.166277] cfg80211: World regulatory domain updated: [100476.166281] cfg80211: DFS Master region: unset [100476.166282] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [100476.166284] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [100476.166285] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [100476.166286] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [100476.166288] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [100476.166289] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [100476.166290] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [100476.166291] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [100476.166293] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [100476.192028] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.192112] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.192169] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.192289] pci_bus 0000:02: Allocating resources [100476.192313] pci_bus 0000:03: Allocating resources [100476.192329] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.192431] pci_bus 0000:01: Allocating resources [100476.192454] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.192495] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.192506] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.192573] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [100476.421439] PM: Syncing filesystems ... done. [100476.717674] PM: Preparing system for sleep (mem) [100477.211946] Freezing user space processes ... (elapsed 0.002 seconds) done. [100477.214038] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [100477.215339] PM: Suspending system (mem) [100477.215354] Suspending console(s) (use no_console_suspend to debug) [100477.215619] sd 0:0:0:0: [sda] Synchronizing SCSI cache [100477.215854] sd 0:0:0:0: [sda] Stopping disk [100477.855200] PM: suspend of devices complete after 640.045 msecs [100477.871146] PM: late suspend of devices complete after 15.947 msecs [100477.873192] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [100477.873208] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [100477.874203] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [100477.874245] r8169 0000:02:00.0: System wakeup enabled by ACPI [100477.887358] PM: noirq suspend of devices complete after 16.218 msecs [100477.887569] ACPI: Preparing to enter system sleep state S3 [100477.915039] ACPI : EC: EC stopped [100477.915040] PM: Saving platform NVS memory [100477.915081] Disabling non-boot CPUs ... [100477.916383] smpboot: CPU 1 is now offline [100477.936727] smpboot: CPU 2 is now offline [100477.952815] smpboot: CPU 3 is now offline [100477.972588] smpboot: CPU 4 is now offline [100477.992555] smpboot: CPU 5 is now offline [100478.015539] Broke affinity for irq 23 [100478.015544] Broke affinity for irq 26 [100478.016561] smpboot: CPU 6 is now offline [100478.035488] Broke affinity for irq 16 [100478.035496] Broke affinity for irq 23 [100478.035499] Broke affinity for irq 26 [100478.036515] smpboot: CPU 7 is now offline [100478.052641] ACPI: Low-level resume complete [100478.052686] ACPI : EC: EC started [100478.052687] PM: Restoring platform NVS memory [100478.053665] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [100478.053802] Enabling non-boot CPUs ... [100478.053849] x86: Booting SMP configuration: [100478.053850] smpboot: Booting Node 0 Processor 1 APIC 0x2 [100478.055248] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [100478.065537] cache: parent cpu1 should not be sleeping [100478.065684] CPU1 is up [100478.065709] smpboot: Booting Node 0 Processor 2 APIC 0x4 [100478.067105] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [100478.077566] cache: parent cpu2 should not be sleeping [100478.077710] CPU2 is up [100478.077733] smpboot: Booting Node 0 Processor 3 APIC 0x6 [100478.079131] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [100478.093610] cache: parent cpu3 should not be sleeping [100478.093755] CPU3 is up [100478.093778] smpboot: Booting Node 0 Processor 4 APIC 0x1 [100478.105530] cache: parent cpu4 should not be sleeping [100478.105634] CPU4 is up [100478.105654] smpboot: Booting Node 0 Processor 5 APIC 0x3 [100478.117546] cache: parent cpu5 should not be sleeping [100478.117648] CPU5 is up [100478.117667] smpboot: Booting Node 0 Processor 6 APIC 0x5 [100478.129574] cache: parent cpu6 should not be sleeping [100478.129673] CPU6 is up [100478.129691] smpboot: Booting Node 0 Processor 7 APIC 0x7 [100478.141648] cache: parent cpu7 should not be sleeping [100478.141750] CPU7 is up [100478.148923] ACPI: Waking up from system sleep state S3 [100478.461332] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [100478.461370] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [100478.461615] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [100478.461651] PM: noirq resume of devices complete after 16.267 msecs [100478.462020] PM: early resume of devices complete after 0.354 msecs [100478.462105] usb usb3: root hub lost power or was reset [100478.462112] usb usb4: root hub lost power or was reset [100478.462132] usb usb1: root hub lost power or was reset [100478.462133] usb usb2: root hub lost power or was reset [100478.463428] r8169 0000:02:00.0: System wakeup disabled by ACPI [100478.464361] ath: phy0: ASPM enabled: 0x43 [100478.466016] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [100478.466018] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [100478.466206] sd 0:0:0:0: [sda] Starting disk [100478.563384] r8169 0000:02:00.0 enp2s0: link down [100478.605206] rtc_cmos 00:02: System wakeup disabled by ACPI [100478.780997] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [100478.784936] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [100478.786537] ata3.00: configured for UDMA/100 [100478.796936] usb 4-1: reset high-speed USB device number 2 using ehci-pci [100478.796984] usb 3-1: reset high-speed USB device number 2 using ehci-pci [100479.396633] usb 4-1.6: reset low-speed USB device number 17 using ehci-pci [100479.686008] PM: resume of devices complete after 1224.633 msecs [100479.686211] PM: Finishing wakeup. [100479.686212] Restarting tasks ... done. [100479.756389] usb 4-1.5: new high-speed USB device number 23 using ehci-pci [100479.886564] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [100479.986420] r8169 0000:02:00.0 enp2s0: link down [100479.986470] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [100479.987118] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [100480.005548] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [100480.073220] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [100480.106657] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [100480.106660] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [100480.106661] usb 4-1.5: Product: USB2.0-CRW [100480.106663] usb 4-1.5: Manufacturer: Generic [100480.106664] usb 4-1.5: SerialNumber: 20090516388200000 [100480.112339] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [100480.132920] scsi host28: usb-storage 4-1.5:1.0 [100480.292275] usb 4-1.5: USB disconnect, device number 23 [100480.472033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [100480.472998] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [100480.473002] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [100480.473004] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [100480.474833] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [100480.474836] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [100480.474846] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [100480.475698] ata1.00: configured for UDMA/133 [100481.050350] wlp3s0: authenticate with c0:25:06:d5:f2:ad [100481.065090] wlp3s0: send auth to c0:25:06:d5:f2:ad (try 1/3) [100481.068276] wlp3s0: authenticated [100481.071685] wlp3s0: associate with c0:25:06:d5:f2:ad (try 1/3) [100481.078209] wlp3s0: RX AssocResp from c0:25:06:d5:f2:ad (capab=0x431 status=0 aid=2) [100481.078321] wlp3s0: associated [100481.078331] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [100481.080904] ath: EEPROM regdomain: 0x8114 [100481.080906] ath: EEPROM indicates we should expect a country code [100481.080907] ath: doing EEPROM country->regdmn map search [100481.080907] ath: country maps to regdmn code: 0x37 [100481.080908] ath: Country alpha2 being used: DE [100481.080909] ath: Regpair used: 0x37 [100481.080910] ath: regdomain 0x8114 dynamically updated by country IE [100481.080930] cfg80211: Regulatory domain changed to country: DE [100481.080931] cfg80211: DFS Master region: ETSI [100481.080932] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [100481.080934] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [100481.080935] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [100481.080937] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [100481.080938] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [100481.080939] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [100507.445779] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [100507.445789] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [105635.927912] wlp3s0: deauthenticating from c0:25:06:d5:f2:ad by local choice (Reason: 3=DEAUTH_LEAVING) [105635.942018] cfg80211: World regulatory domain updated: [105635.942021] cfg80211: DFS Master region: unset [105635.942023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [105635.942026] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [105635.942027] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [105635.942029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [105635.942032] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [105635.942034] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [105635.942036] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [105635.942037] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [105635.942039] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [105635.965955] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105635.966037] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105635.966092] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105635.966223] pci_bus 0000:02: Allocating resources [105635.966244] pci_bus 0000:03: Allocating resources [105635.966260] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105635.966357] pci_bus 0000:01: Allocating resources [105635.966364] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105635.966406] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105635.966417] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105635.966481] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [105636.198062] PM: Syncing filesystems ... done. [105636.463533] PM: Preparing system for sleep (mem) [105636.835750] Freezing user space processes ... (elapsed 0.001 seconds) done. [105636.837736] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [105636.838942] PM: Suspending system (mem) [105636.838959] Suspending console(s) (use no_console_suspend to debug) [105636.839219] sd 0:0:0:0: [sda] Synchronizing SCSI cache [105636.839349] sd 0:0:0:0: [sda] Stopping disk [105637.481228] PM: suspend of devices complete after 642.464 msecs [105637.497217] PM: late suspend of devices complete after 15.983 msecs [105637.499419] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [105637.499424] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [105637.500157] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [105637.500214] r8169 0000:02:00.0: System wakeup enabled by ACPI [105637.513357] PM: noirq suspend of devices complete after 16.145 msecs [105637.513566] ACPI: Preparing to enter system sleep state S3 [105637.541086] ACPI : EC: EC stopped [105637.541087] PM: Saving platform NVS memory [105637.541126] Disabling non-boot CPUs ... [105637.542430] smpboot: CPU 1 is now offline [105637.562822] smpboot: CPU 2 is now offline [105637.586855] smpboot: CPU 3 is now offline [105637.602800] smpboot: CPU 4 is now offline [105637.622698] smpboot: CPU 5 is now offline [105637.637621] Broke affinity for irq 23 [105637.637624] Broke affinity for irq 26 [105637.638629] smpboot: CPU 6 is now offline [105637.657635] Broke affinity for irq 16 [105637.657643] Broke affinity for irq 23 [105637.657646] Broke affinity for irq 26 [105637.658664] smpboot: CPU 7 is now offline [105637.674645] ACPI: Low-level resume complete [105637.674688] ACPI : EC: EC started [105637.674689] PM: Restoring platform NVS memory [105637.675628] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [105637.675759] Enabling non-boot CPUs ... [105637.675808] x86: Booting SMP configuration: [105637.675809] smpboot: Booting Node 0 Processor 1 APIC 0x2 [105637.677206] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [105637.691543] cache: parent cpu1 should not be sleeping [105637.691691] CPU1 is up [105637.691714] smpboot: Booting Node 0 Processor 2 APIC 0x4 [105637.693111] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [105637.703579] cache: parent cpu2 should not be sleeping [105637.703723] CPU2 is up [105637.703746] smpboot: Booting Node 0 Processor 3 APIC 0x6 [105637.705142] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [105637.719615] cache: parent cpu3 should not be sleeping [105637.719758] CPU3 is up [105637.719783] smpboot: Booting Node 0 Processor 4 APIC 0x1 [105637.731540] cache: parent cpu4 should not be sleeping [105637.731645] CPU4 is up [105637.731664] smpboot: Booting Node 0 Processor 5 APIC 0x3 [105637.743559] cache: parent cpu5 should not be sleeping [105637.743657] CPU5 is up [105637.743676] smpboot: Booting Node 0 Processor 6 APIC 0x5 [105637.755583] cache: parent cpu6 should not be sleeping [105637.755681] CPU6 is up [105637.755699] smpboot: Booting Node 0 Processor 7 APIC 0x7 [105637.767656] cache: parent cpu7 should not be sleeping [105637.767757] CPU7 is up [105637.774936] ACPI: Waking up from system sleep state S3 [105638.087423] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [105638.087628] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [105638.087647] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [105638.087703] PM: noirq resume of devices complete after 16.298 msecs [105638.088070] PM: early resume of devices complete after 0.353 msecs [105638.088152] usb usb4: root hub lost power or was reset [105638.088170] usb usb1: root hub lost power or was reset [105638.088171] usb usb2: root hub lost power or was reset [105638.088212] usb usb3: root hub lost power or was reset [105638.088250] ath: phy0: ASPM enabled: 0x43 [105638.088262] r8169 0000:02:00.0: System wakeup disabled by ACPI [105638.092060] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [105638.092103] sd 0:0:0:0: [sda] Starting disk [105638.094037] mei_me 0000:00:16.0: FW not ready: resetting. [105638.094051] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [105638.094317] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [105638.201371] r8169 0000:02:00.0 enp2s0: link down [105638.231363] rtc_cmos 00:02: System wakeup disabled by ACPI [105638.407005] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [105638.414957] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [105638.416572] ata3.00: configured for UDMA/100 [105638.422946] usb 4-1: reset high-speed USB device number 2 using ehci-pci [105638.423019] usb 3-1: reset high-speed USB device number 2 using ehci-pci [105639.022652] usb 4-1.6: reset low-speed USB device number 17 using ehci-pci [105639.311755] PM: resume of devices complete after 1224.306 msecs [105639.311921] PM: Finishing wakeup. [105639.311922] Restarting tasks ... done. [105639.398416] usb 4-1.5: new high-speed USB device number 24 using ehci-pci [105639.516636] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [105639.636474] r8169 0000:02:00.0 enp2s0: link down [105639.636542] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [105639.637335] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [105639.655821] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [105639.722464] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [105639.752504] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [105639.752509] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [105639.752510] usb 4-1.5: Product: USB2.0-CRW [105639.752512] usb 4-1.5: Manufacturer: Generic [105639.752513] usb 4-1.5: SerialNumber: 20090516388200000 [105639.759273] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [105639.778341] scsi host29: usb-storage 4-1.5:1.0 [105639.919281] usb 4-1.5: USB disconnect, device number 24 [105640.086096] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [105640.087165] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [105640.087169] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [105640.087171] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [105640.089159] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [105640.089166] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [105640.089171] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [105640.090213] ata1.00: configured for UDMA/133 [105640.716167] wlp3s0: authenticate with c0:25:06:d5:f2:ad [105640.730868] wlp3s0: send auth to c0:25:06:d5:f2:ad (try 1/3) [105640.734030] wlp3s0: authenticated [105640.737769] wlp3s0: associate with c0:25:06:d5:f2:ad (try 1/3) [105640.744041] wlp3s0: RX AssocResp from c0:25:06:d5:f2:ad (capab=0x431 status=0 aid=5) [105640.744138] wlp3s0: associated [105640.744162] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [105640.746954] ath: EEPROM regdomain: 0x8114 [105640.746957] ath: EEPROM indicates we should expect a country code [105640.746959] ath: doing EEPROM country->regdmn map search [105640.746960] ath: country maps to regdmn code: 0x37 [105640.746961] ath: Country alpha2 being used: DE [105640.746963] ath: Regpair used: 0x37 [105640.746964] ath: regdomain 0x8114 dynamically updated by country IE [105640.746986] cfg80211: Regulatory domain changed to country: DE [105640.746988] cfg80211: DFS Master region: ETSI [105640.746989] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [105640.746992] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [105640.746995] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [105640.746997] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [105640.746999] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [105640.747001] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [112230.551208] wlp3s0: deauthenticating from c0:25:06:d5:f2:ad by local choice (Reason: 3=DEAUTH_LEAVING) [112230.563131] cfg80211: World regulatory domain updated: [112230.563134] cfg80211: DFS Master region: unset [112230.563136] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [112230.563137] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [112230.563139] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [112230.563140] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [112230.563141] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [112230.563143] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [112230.563144] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [112230.563145] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [112230.563146] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [112230.588205] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.588294] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.588355] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.588477] pci_bus 0000:02: Allocating resources [112230.588502] pci_bus 0000:03: Allocating resources [112230.588518] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.588617] pci_bus 0000:01: Allocating resources [112230.588626] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.588668] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.588680] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.588746] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112230.814386] PM: Syncing filesystems ... done. [112231.157903] PM: Preparing system for sleep (mem) [112231.469481] Freezing user space processes ... (elapsed 0.002 seconds) done. [112231.471932] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [112231.473288] PM: Suspending system (mem) [112231.473305] Suspending console(s) (use no_console_suspend to debug) [112231.473541] sd 0:0:0:0: [sda] Synchronizing SCSI cache [112231.473675] sd 0:0:0:0: [sda] Stopping disk [112232.103424] PM: suspend of devices complete after 630.333 msecs [112232.119353] PM: late suspend of devices complete after 15.933 msecs [112232.121191] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [112232.121317] r8169 0000:02:00.0: System wakeup enabled by ACPI [112232.121454] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [112232.121464] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [112232.135523] PM: noirq suspend of devices complete after 16.175 msecs [112232.135734] ACPI: Preparing to enter system sleep state S3 [112232.163255] ACPI : EC: EC stopped [112232.163256] PM: Saving platform NVS memory [112232.163296] Disabling non-boot CPUs ... [112232.164606] smpboot: CPU 1 is now offline [112232.188967] smpboot: CPU 2 is now offline [112232.205037] smpboot: CPU 3 is now offline [112232.220987] smpboot: CPU 4 is now offline [112232.244885] smpboot: CPU 5 is now offline [112232.263769] Broke affinity for irq 23 [112232.263774] Broke affinity for irq 26 [112232.264790] smpboot: CPU 6 is now offline [112232.283722] Broke affinity for irq 16 [112232.283730] Broke affinity for irq 23 [112232.283733] Broke affinity for irq 26 [112232.284749] smpboot: CPU 7 is now offline [112232.300831] ACPI: Low-level resume complete [112232.300876] ACPI : EC: EC started [112232.300877] PM: Restoring platform NVS memory [112232.301826] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [112232.301959] Enabling non-boot CPUs ... [112232.302007] x86: Booting SMP configuration: [112232.302008] smpboot: Booting Node 0 Processor 1 APIC 0x2 [112232.303403] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [112232.317716] cache: parent cpu1 should not be sleeping [112232.317864] CPU1 is up [112232.317889] smpboot: Booting Node 0 Processor 2 APIC 0x4 [112232.319285] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [112232.329746] cache: parent cpu2 should not be sleeping [112232.329890] CPU2 is up [112232.329914] smpboot: Booting Node 0 Processor 3 APIC 0x6 [112232.331312] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [112232.345784] cache: parent cpu3 should not be sleeping [112232.345928] CPU3 is up [112232.345952] smpboot: Booting Node 0 Processor 4 APIC 0x1 [112232.365706] cache: parent cpu4 should not be sleeping [112232.365809] CPU4 is up [112232.365827] smpboot: Booting Node 0 Processor 5 APIC 0x3 [112232.377724] cache: parent cpu5 should not be sleeping [112232.377821] CPU5 is up [112232.377840] smpboot: Booting Node 0 Processor 6 APIC 0x5 [112232.389747] cache: parent cpu6 should not be sleeping [112232.389847] CPU6 is up [112232.389865] smpboot: Booting Node 0 Processor 7 APIC 0x7 [112232.401819] cache: parent cpu7 should not be sleeping [112232.401920] CPU7 is up [112232.409077] ACPI: Waking up from system sleep state S3 [112232.721563] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [112232.721631] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [112232.721817] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [112232.721848] PM: noirq resume of devices complete after 16.299 msecs [112232.722242] PM: early resume of devices complete after 0.378 msecs [112232.722354] usb usb3: root hub lost power or was reset [112232.722363] usb usb4: root hub lost power or was reset [112232.722375] usb usb1: root hub lost power or was reset [112232.722377] usb usb2: root hub lost power or was reset [112232.723663] r8169 0000:02:00.0: System wakeup disabled by ACPI [112232.724609] ath: phy0: ASPM enabled: 0x43 [112232.726253] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [112232.726255] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [112232.728612] sd 0:0:0:0: [sda] Starting disk [112232.835518] r8169 0000:02:00.0 enp2s0: link down [112232.865502] rtc_cmos 00:02: System wakeup disabled by ACPI [112233.041197] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [112233.045089] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [112233.046715] ata3.00: configured for UDMA/100 [112233.057092] usb 3-1: reset high-speed USB device number 2 using ehci-pci [112233.057167] usb 4-1: reset high-speed USB device number 2 using ehci-pci [112233.656760] usb 4-1.6: reset low-speed USB device number 17 using ehci-pci [112233.945974] PM: resume of devices complete after 1224.406 msecs [112233.946151] PM: Finishing wakeup. [112233.946152] Restarting tasks ... done. [112234.024527] usb 4-1.5: new high-speed USB device number 25 using ehci-pci [112234.162498] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [112234.278523] r8169 0000:02:00.0 enp2s0: link down [112234.278579] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [112234.279238] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [112234.297811] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [112234.373640] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [112234.373644] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [112234.373645] usb 4-1.5: Product: USB2.0-CRW [112234.373647] usb 4-1.5: Manufacturer: Generic [112234.373648] usb 4-1.5: SerialNumber: 20090516388200000 [112234.376362] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [112234.379379] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [112234.399008] scsi host30: usb-storage 4-1.5:1.0 [112234.556245] usb 4-1.5: USB disconnect, device number 25 [112234.732156] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [112234.733144] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [112234.733147] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [112234.733149] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [112234.735096] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [112234.735099] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [112234.735100] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [112234.735959] ata1.00: configured for UDMA/133 [112235.350157] wlp3s0: authenticate with c0:25:06:d5:f2:ad [112235.364832] wlp3s0: send auth to c0:25:06:d5:f2:ad (try 1/3) [112235.367953] wlp3s0: authenticated [112235.371771] wlp3s0: associate with c0:25:06:d5:f2:ad (try 1/3) [112235.379206] wlp3s0: RX AssocResp from c0:25:06:d5:f2:ad (capab=0x431 status=0 aid=2) [112235.379305] wlp3s0: associated [112235.379314] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [112235.382148] ath: EEPROM regdomain: 0x8114 [112235.382150] ath: EEPROM indicates we should expect a country code [112235.382151] ath: doing EEPROM country->regdmn map search [112235.382152] ath: country maps to regdmn code: 0x37 [112235.382153] ath: Country alpha2 being used: DE [112235.382154] ath: Regpair used: 0x37 [112235.382155] ath: regdomain 0x8114 dynamically updated by country IE [112235.382174] cfg80211: Regulatory domain changed to country: DE [112235.382175] cfg80211: DFS Master region: ETSI [112235.382176] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [112235.382178] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [112235.382179] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [112235.382181] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [112235.382182] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [112235.382183] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [112261.705174] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [112261.705184] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [112982.904486] wlp3s0: deauthenticating from c0:25:06:d5:f2:ad by local choice (Reason: 3=DEAUTH_LEAVING) [112982.917742] cfg80211: World regulatory domain updated: [112982.917749] cfg80211: DFS Master region: unset [112982.917751] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [112982.917755] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [112982.917758] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [112982.917760] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [112982.917763] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [112982.917766] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [112982.917768] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [112982.917771] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [112982.917773] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [112982.937272] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112982.937412] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112982.937509] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112982.937693] pci_bus 0000:02: Allocating resources [112982.937718] pci_bus 0000:03: Allocating resources [112982.937737] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112982.937911] pci_bus 0000:01: Allocating resources [112982.937931] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112982.937997] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112982.938014] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112982.938128] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112983.454835] PM: Syncing filesystems ... done. [112984.058673] PM: Preparing system for sleep (mem) [112984.430545] Freezing user space processes ... (elapsed 0.003 seconds) done. [112984.434338] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [112984.435903] PM: Suspending system (mem) [112984.435933] Suspending console(s) (use no_console_suspend to debug) [112984.436462] sd 0:0:0:0: [sda] Synchronizing SCSI cache [112984.436691] sd 0:0:0:0: [sda] Stopping disk [112985.068077] PM: suspend of devices complete after 632.229 msecs [112985.084077] PM: late suspend of devices complete after 15.999 msecs [112985.086915] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [112985.087766] r8169 0000:02:00.0: System wakeup enabled by ACPI [112985.087787] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [112985.087796] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [112985.100247] PM: noirq suspend of devices complete after 16.173 msecs [112985.100792] ACPI: Preparing to enter system sleep state S3 [112985.127933] ACPI : EC: EC stopped [112985.127934] PM: Saving platform NVS memory [112985.127967] Disabling non-boot CPUs ... [112985.129522] smpboot: CPU 1 is now offline [112985.150226] smpboot: CPU 2 is now offline [112985.166208] smpboot: CPU 3 is now offline [112985.190109] smpboot: CPU 4 is now offline [112985.210014] smpboot: CPU 5 is now offline [112985.232868] Broke affinity for irq 23 [112985.232873] Broke affinity for irq 26 [112985.233899] smpboot: CPU 6 is now offline [112985.252718] Broke affinity for irq 16 [112985.252727] Broke affinity for irq 23 [112985.252731] Broke affinity for irq 26 [112985.253767] smpboot: CPU 7 is now offline [112985.269891] ACPI: Low-level resume complete [112985.269936] ACPI : EC: EC started [112985.269936] PM: Restoring platform NVS memory [112985.270879] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [112985.271010] Enabling non-boot CPUs ... [112985.271058] x86: Booting SMP configuration: [112985.271059] smpboot: Booting Node 0 Processor 1 APIC 0x2 [112985.272457] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [112985.286589] cache: parent cpu1 should not be sleeping [112985.286736] CPU1 is up [112985.286760] smpboot: Booting Node 0 Processor 2 APIC 0x4 [112985.288157] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [112985.298617] cache: parent cpu2 should not be sleeping [112985.298760] CPU2 is up [112985.298784] smpboot: Booting Node 0 Processor 3 APIC 0x6 [112985.300182] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [112985.318659] cache: parent cpu3 should not be sleeping [112985.318798] CPU3 is up [112985.318822] smpboot: Booting Node 0 Processor 4 APIC 0x1 [112985.334578] cache: parent cpu4 should not be sleeping [112985.334676] CPU4 is up [112985.334694] smpboot: Booting Node 0 Processor 5 APIC 0x3 [112985.346601] cache: parent cpu5 should not be sleeping [112985.346697] CPU5 is up [112985.346716] smpboot: Booting Node 0 Processor 6 APIC 0x5 [112985.358623] cache: parent cpu6 should not be sleeping [112985.358721] CPU6 is up [112985.358738] smpboot: Booting Node 0 Processor 7 APIC 0x7 [112985.374676] cache: parent cpu7 should not be sleeping [112985.374776] CPU7 is up [112985.381925] ACPI: Waking up from system sleep state S3 [112985.694439] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [112985.694658] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [112985.694707] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [112985.694743] PM: noirq resume of devices complete after 16.354 msecs [112985.695169] PM: early resume of devices complete after 0.411 msecs [112985.695273] usb usb3: root hub lost power or was reset [112985.695292] usb usb1: root hub lost power or was reset [112985.695294] usb usb2: root hub lost power or was reset [112985.695317] usb usb4: root hub lost power or was reset [112985.696576] r8169 0000:02:00.0: System wakeup disabled by ACPI [112985.699172] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [112985.699195] ath: phy0: ASPM enabled: 0x43 [112985.699205] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [112985.718276] sd 0:0:0:0: [sda] Starting disk [112985.812370] r8169 0000:02:00.0 enp2s0: link down [112985.838205] rtc_cmos 00:02: System wakeup disabled by ACPI [112986.018020] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [112986.045947] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [112986.045954] usb 4-1: reset high-speed USB device number 2 using ehci-pci [112986.046027] usb 3-1: reset high-speed USB device number 2 using ehci-pci [112986.047546] ata3.00: configured for UDMA/100 [112986.645621] usb 4-1.6: reset low-speed USB device number 17 using ehci-pci [112986.939251] PM: resume of devices complete after 1244.769 msecs [112986.939398] PM: Finishing wakeup. [112986.939399] Restarting tasks ... done. [112987.009492] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.009574] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.009628] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.009739] pci_bus 0000:02: Allocating resources [112987.009757] pci_bus 0000:03: Allocating resources [112987.009770] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.009865] pci_bus 0000:01: Allocating resources [112987.009870] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.009906] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.009916] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.009980] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [112987.013368] usb 4-1.5: new high-speed USB device number 26 using ehci-pci [112987.139386] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [112987.255357] r8169 0000:02:00.0 enp2s0: link down [112987.255436] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [112987.256114] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [112987.274579] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [112987.329420] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [112987.369973] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [112987.369977] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [112987.369978] usb 4-1.5: Product: USB2.0-CRW [112987.369980] usb 4-1.5: Manufacturer: Generic [112987.369981] usb 4-1.5: SerialNumber: 20090516388200000 [112987.375539] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [112987.394522] scsi host31: usb-storage 4-1.5:1.0 [112987.549681] usb 4-1.5: USB disconnect, device number 26 [112987.661028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [112987.661938] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [112987.661940] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [112987.661942] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [112987.663767] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [112987.663768] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [112987.663770] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [112987.664633] ata1.00: configured for UDMA/133 [112989.500561] wlp3s0: authenticate with 34:31:c4:6a:31:fb [112989.522295] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [112989.524824] wlp3s0: authenticated [112989.528007] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [112989.540440] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [112989.540541] wlp3s0: associated [112989.540550] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [112989.542856] ath: EEPROM regdomain: 0x8114 [112989.542858] ath: EEPROM indicates we should expect a country code [112989.542860] ath: doing EEPROM country->regdmn map search [112989.542860] ath: country maps to regdmn code: 0x37 [112989.542862] ath: Country alpha2 being used: DE [112989.542862] ath: Regpair used: 0x37 [112989.542863] ath: regdomain 0x8114 dynamically updated by country IE [112989.542883] cfg80211: Regulatory domain changed to country: DE [112989.542884] cfg80211: DFS Master region: ETSI [112989.542885] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [112989.542886] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [112989.542888] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [112989.542889] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [112989.542890] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [112989.542892] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [113014.682042] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [113014.682058] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [113141.110974] usb 4-1.6: USB disconnect, device number 17 [113144.148833] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [113144.160803] cfg80211: World regulatory domain updated: [113144.160806] cfg80211: DFS Master region: unset [113144.160808] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [113144.160809] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [113144.160811] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [113144.160812] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [113144.160813] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [113144.160815] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [113144.160816] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [113144.160817] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [113144.160818] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [113144.198285] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.198377] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.198432] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.198538] pci_bus 0000:02: Allocating resources [113144.198556] pci_bus 0000:03: Allocating resources [113144.198569] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.198662] pci_bus 0000:01: Allocating resources [113144.198682] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.198719] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.198730] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.198793] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [113144.443998] PM: Syncing filesystems ... done. [113144.677345] PM: Preparing system for sleep (mem) [113145.234078] Freezing user space processes ... (elapsed 0.002 seconds) done. [113145.236501] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [113145.237768] PM: Suspending system (mem) [113145.237784] Suspending console(s) (use no_console_suspend to debug) [113145.238012] sd 0:0:0:0: [sda] Synchronizing SCSI cache [113145.257425] sd 0:0:0:0: [sda] Stopping disk [113145.881351] PM: suspend of devices complete after 643.794 msecs [113145.897343] PM: late suspend of devices complete after 15.994 msecs [113145.899435] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [113145.899571] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [113145.900350] r8169 0000:02:00.0: System wakeup enabled by ACPI [113145.900351] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [113145.913484] PM: noirq suspend of devices complete after 16.147 msecs [113145.913695] ACPI: Preparing to enter system sleep state S3 [113146.680791] ACPI : EC: EC stopped [113146.680792] PM: Saving platform NVS memory [113146.680825] Disabling non-boot CPUs ... [113146.682099] smpboot: CPU 1 is now offline [113146.703162] smpboot: CPU 2 is now offline [113146.722896] smpboot: CPU 3 is now offline [113146.742648] smpboot: CPU 4 is now offline [113146.762571] smpboot: CPU 5 is now offline [113146.777503] Broke affinity for irq 23 [113146.777517] Broke affinity for irq 26 [113146.778527] smpboot: CPU 6 is now offline [113146.797582] Broke affinity for irq 16 [113146.797589] Broke affinity for irq 23 [113146.797592] Broke affinity for irq 26 [113146.798606] smpboot: CPU 7 is now offline [113146.814570] ACPI: Low-level resume complete [113146.814615] ACPI : EC: EC started [113146.814616] PM: Restoring platform NVS memory [113146.815589] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [113146.815710] Enabling non-boot CPUs ... [113146.815758] x86: Booting SMP configuration: [113146.815760] smpboot: Booting Node 0 Processor 1 APIC 0x2 [113146.817156] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [113146.831395] cache: parent cpu1 should not be sleeping [113146.831542] CPU1 is up [113146.831565] smpboot: Booting Node 0 Processor 2 APIC 0x4 [113146.832961] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [113146.843424] cache: parent cpu2 should not be sleeping [113146.843566] CPU2 is up [113146.843591] smpboot: Booting Node 0 Processor 3 APIC 0x6 [113146.844990] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [113146.859466] cache: parent cpu3 should not be sleeping [113146.859607] CPU3 is up [113146.859629] smpboot: Booting Node 0 Processor 4 APIC 0x1 [113146.871389] cache: parent cpu4 should not be sleeping [113146.871488] CPU4 is up [113146.871505] smpboot: Booting Node 0 Processor 5 APIC 0x3 [113146.883406] cache: parent cpu5 should not be sleeping [113146.883503] CPU5 is up [113146.883521] smpboot: Booting Node 0 Processor 6 APIC 0x5 [113146.895429] cache: parent cpu6 should not be sleeping [113146.895525] CPU6 is up [113146.895543] smpboot: Booting Node 0 Processor 7 APIC 0x7 [113146.907490] cache: parent cpu7 should not be sleeping [113146.907590] CPU7 is up [113146.914712] ACPI: Waking up from system sleep state S3 [113147.231232] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [113147.231249] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [113147.231490] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [113147.231515] PM: noirq resume of devices complete after 16.339 msecs [113147.231882] PM: early resume of devices complete after 0.352 msecs [113147.231967] usb usb1: root hub lost power or was reset [113147.231968] usb usb2: root hub lost power or was reset [113147.231969] usb usb3: root hub lost power or was reset [113147.232068] usb usb4: root hub lost power or was reset [113147.232139] r8169 0000:02:00.0: System wakeup disabled by ACPI [113147.233214] ath: phy0: ASPM enabled: 0x43 [113147.235855] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [113147.235944] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [113147.236212] sd 0:0:0:0: [sda] Starting disk [113147.337234] r8169 0000:02:00.0 enp2s0: link down [113147.375141] rtc_cmos 00:02: System wakeup disabled by ACPI [113147.550865] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [113147.554768] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [113147.556365] ata3.00: configured for UDMA/100 [113147.566767] usb 3-1: reset high-speed USB device number 2 using ehci-pci [113147.566828] usb 4-1: reset high-speed USB device number 2 using ehci-pci [113147.906660] PM: resume of devices complete after 675.149 msecs [113147.906841] PM: Finishing wakeup. [113147.906842] Restarting tasks ... done. [113147.978495] usb 4-1.5: new high-speed USB device number 27 using ehci-pci [113148.086957] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [113148.086961] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [113148.086964] usb 4-1.5: Product: USB2.0-CRW [113148.086966] usb 4-1.5: Manufacturer: Generic [113148.086968] usb 4-1.5: SerialNumber: 20090516388200000 [113148.092832] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [113148.108537] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [113148.113146] scsi host32: usb-storage 4-1.5:1.0 [113148.224502] r8169 0000:02:00.0 enp2s0: link down [113148.224560] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [113148.225245] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [113148.243949] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [113148.302093] usb 4-1.5: USB disconnect, device number 27 [113148.330407] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [113149.249800] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [113149.250707] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [113149.250710] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [113149.250712] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [113149.252540] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [113149.252542] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [113149.252544] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [113149.253446] ata1.00: configured for UDMA/133 [113150.277900] wlp3s0: authenticate with 34:31:c4:6a:31:fb [113150.299632] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [113150.302167] wlp3s0: authenticated [113150.305209] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [113150.317687] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [113150.317784] wlp3s0: associated [113150.317794] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [113150.320213] ath: EEPROM regdomain: 0x8114 [113150.320215] ath: EEPROM indicates we should expect a country code [113150.320216] ath: doing EEPROM country->regdmn map search [113150.320217] ath: country maps to regdmn code: 0x37 [113150.320218] ath: Country alpha2 being used: DE [113150.320219] ath: Regpair used: 0x37 [113150.320220] ath: regdomain 0x8114 dynamically updated by country IE [113150.320239] cfg80211: Regulatory domain changed to country: DE [113150.320240] cfg80211: DFS Master region: ETSI [113150.320241] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [113150.320243] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [113150.320244] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [113150.320246] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [113150.320247] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [113150.320248] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [113176.218855] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [113176.218872] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [113196.891365] usb 1-2: new high-speed USB device number 10 using xhci_hcd [113197.019785] usb 1-2: New USB device found, idVendor=03f0, idProduct=6c11 [113197.019791] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [113197.019795] usb 1-2: Product: Photosmart C4400 series [113197.019798] usb 1-2: Manufacturer: HP [113197.019801] usb 1-2: SerialNumber: MY885PM38X05BN [113197.020393] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11 [113197.020464] usb-storage 1-2:1.3: USB Mass Storage device detected [113197.020613] scsi host33: usb-storage 1-2:1.3 [113198.019517] scsi 33:0:0:0: Direct-Access HP Photosmart C4400 1.00 PQ: 0 ANSI: 5 [113198.019885] sd 33:0:0:0: Attached scsi generic sg2 type 0 [113198.021036] sd 33:0:0:0: [sdb] Attached SCSI removable disk [113202.356300] usblp0: removed [113202.356835] usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11 [113233.485253] usblp0: removed [113233.485420] Did not find alt setting 1 for intf 0, config 1 [113233.485727] Did not find alt setting 1 for intf 0, config 1 [113944.781727] Did not find alt setting 1 for intf 0, config 1 [113981.966636] Did not find alt setting 1 for intf 0, config 1 [113983.965808] Did not find alt setting 1 for intf 0, config 1 [113985.964931] Did not find alt setting 1 for intf 0, config 1 [113987.964023] Did not find alt setting 1 for intf 0, config 1 [114024.680169] Did not find alt setting 1 for intf 0, config 1 [114045.248299] Did not find alt setting 1 for intf 0, config 1 [114047.247525] Did not find alt setting 1 for intf 0, config 1 [114096.874715] Did not find alt setting 1 for intf 0, config 1 [114110.550943] Did not find alt setting 1 for intf 0, config 1 [114112.550126] Did not find alt setting 1 for intf 0, config 1 [114114.549258] Did not find alt setting 1 for intf 0, config 1 [114116.548393] Did not find alt setting 1 for intf 0, config 1 [114370.127268] Did not find alt setting 1 for intf 0, config 1 [114398.283127] Did not find alt setting 1 for intf 0, config 1 [114400.282352] Did not find alt setting 1 for intf 0, config 1 [114402.281453] Did not find alt setting 1 for intf 0, config 1 [114404.280599] Did not find alt setting 1 for intf 0, config 1 [114406.279754] Did not find alt setting 1 for intf 0, config 1 [114490.644221] Did not find alt setting 1 for intf 0, config 1 [114527.939684] Did not find alt setting 1 for intf 0, config 1 [114529.938877] Did not find alt setting 1 for intf 0, config 1 [114531.937991] Did not find alt setting 1 for intf 0, config 1 [114533.937116] Did not find alt setting 1 for intf 0, config 1 [114575.213422] usb 1-2: USB disconnect, device number 10 [114591.986828] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [114591.998019] cfg80211: World regulatory domain updated: [114591.998025] cfg80211: DFS Master region: unset [114591.998026] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [114591.998028] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [114591.998030] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [114591.998031] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [114591.998033] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [114591.998035] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [114591.998036] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [114591.998038] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [114591.998039] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [114592.028995] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.029092] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.029153] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.029267] pci_bus 0000:02: Allocating resources [114592.029287] pci_bus 0000:03: Allocating resources [114592.029300] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.029401] pci_bus 0000:01: Allocating resources [114592.029407] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.029445] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.029457] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.029521] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [114592.255799] PM: Syncing filesystems ... done. [114592.522502] PM: Preparing system for sleep (mem) [114592.881553] Freezing user space processes ... (elapsed 0.002 seconds) done. [114592.883941] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [114592.885220] PM: Suspending system (mem) [114592.885236] Suspending console(s) (use no_console_suspend to debug) [114592.885958] sd 0:0:0:0: [sda] Synchronizing SCSI cache [114592.896231] sd 0:0:0:0: [sda] Stopping disk [114593.528285] PM: suspend of devices complete after 643.278 msecs [114593.544269] PM: late suspend of devices complete after 15.978 msecs [114593.546175] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [114593.546303] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [114593.547174] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [114593.547224] r8169 0000:02:00.0: System wakeup enabled by ACPI [114593.560402] PM: noirq suspend of devices complete after 16.139 msecs [114593.560612] ACPI: Preparing to enter system sleep state S3 [114593.588140] ACPI : EC: EC stopped [114593.588141] PM: Saving platform NVS memory [114593.588181] Disabling non-boot CPUs ... [114593.589479] smpboot: CPU 1 is now offline [114593.609838] smpboot: CPU 2 is now offline [114593.629772] smpboot: CPU 3 is now offline [114593.649765] smpboot: CPU 4 is now offline [114593.669672] smpboot: CPU 5 is now offline [114593.688589] Broke affinity for irq 23 [114593.688592] Broke affinity for irq 26 [114593.689602] smpboot: CPU 6 is now offline [114593.708611] Broke affinity for irq 16 [114593.708619] Broke affinity for irq 23 [114593.708624] Broke affinity for irq 26 [114593.709645] smpboot: CPU 7 is now offline [114593.725599] ACPI: Low-level resume complete [114593.725643] ACPI : EC: EC started [114593.725644] PM: Restoring platform NVS memory [114593.726601] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [114593.726732] Enabling non-boot CPUs ... [114593.726782] x86: Booting SMP configuration: [114593.726783] smpboot: Booting Node 0 Processor 1 APIC 0x2 [114593.728180] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [114593.742525] cache: parent cpu1 should not be sleeping [114593.742673] CPU1 is up [114593.742696] smpboot: Booting Node 0 Processor 2 APIC 0x4 [114593.744092] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [114593.754557] cache: parent cpu2 should not be sleeping [114593.754702] CPU2 is up [114593.754726] smpboot: Booting Node 0 Processor 3 APIC 0x6 [114593.756125] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [114593.770599] cache: parent cpu3 should not be sleeping [114593.770746] CPU3 is up [114593.770769] smpboot: Booting Node 0 Processor 4 APIC 0x1 [114593.782522] cache: parent cpu4 should not be sleeping [114593.782627] CPU4 is up [114593.782646] smpboot: Booting Node 0 Processor 5 APIC 0x3 [114593.794538] cache: parent cpu5 should not be sleeping [114593.794641] CPU5 is up [114593.794661] smpboot: Booting Node 0 Processor 6 APIC 0x5 [114593.806564] cache: parent cpu6 should not be sleeping [114593.806666] CPU6 is up [114593.806686] smpboot: Booting Node 0 Processor 7 APIC 0x7 [114593.818641] cache: parent cpu7 should not be sleeping [114593.818747] CPU7 is up [114593.825909] ACPI: Waking up from system sleep state S3 [114594.138413] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [114594.138438] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [114594.138510] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [114594.138678] PM: noirq resume of devices complete after 16.317 msecs [114594.139045] PM: early resume of devices complete after 0.353 msecs [114594.139133] usb usb1: root hub lost power or was reset [114594.139135] usb usb2: root hub lost power or was reset [114594.139135] usb usb3: root hub lost power or was reset [114594.139219] usb usb4: root hub lost power or was reset [114594.139433] r8169 0000:02:00.0: System wakeup disabled by ACPI [114594.140426] ath: phy0: ASPM enabled: 0x43 [114594.143039] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [114594.143094] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [114594.143372] sd 0:0:0:0: [sda] Starting disk [114594.145387] mei_me 0000:00:16.0: FW not ready: resetting. [114594.145397] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [114594.252341] r8169 0000:02:00.0 enp2s0: link down [114594.354129] rtc_cmos 00:02: System wakeup disabled by ACPI [114594.457947] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [114594.469900] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [114594.471533] ata3.00: configured for UDMA/100 [114594.473913] usb 3-1: reset high-speed USB device number 2 using ehci-pci [114594.473938] usb 4-1: reset high-speed USB device number 2 using ehci-pci [114594.813828] PM: resume of devices complete after 675.155 msecs [114594.814005] PM: Finishing wakeup. [114594.814007] Restarting tasks ... done. [114594.885637] usb 4-1.5: new high-speed USB device number 28 using ehci-pci [114595.035731] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [114595.143611] r8169 0000:02:00.0 enp2s0: link down [114595.143669] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [114595.144328] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [114595.163070] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [114595.225998] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [114595.234822] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [114595.234826] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [114595.234829] usb 4-1.5: Product: USB2.0-CRW [114595.234831] usb 4-1.5: Manufacturer: Generic [114595.234833] usb 4-1.5: SerialNumber: 20090516388200000 [114595.241533] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [114595.261216] scsi host34: usb-storage 4-1.5:1.0 [114595.466027] usb 4-1.5: USB disconnect, device number 28 [114596.144968] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [114596.145940] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [114596.145956] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [114596.145959] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [114596.147871] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [114596.147876] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [114596.147880] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [114596.148818] ata1.00: configured for UDMA/133 [114597.181016] wlp3s0: authenticate with 34:31:c4:6a:31:fb [114597.202904] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [114597.205398] wlp3s0: authenticated [114597.208343] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [114597.222466] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=3) [114597.222568] wlp3s0: associated [114597.222596] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [114597.225118] ath: EEPROM regdomain: 0x8114 [114597.225120] ath: EEPROM indicates we should expect a country code [114597.225121] ath: doing EEPROM country->regdmn map search [114597.225122] ath: country maps to regdmn code: 0x37 [114597.225123] ath: Country alpha2 being used: DE [114597.225124] ath: Regpair used: 0x37 [114597.225125] ath: regdomain 0x8114 dynamically updated by country IE [114597.225145] cfg80211: Regulatory domain changed to country: DE [114597.225146] cfg80211: DFS Master region: ETSI [114597.225147] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [114597.225148] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [114597.225150] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [114597.225151] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [114597.225153] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [114597.225154] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [114601.841853] usb 4-1.6: new low-speed USB device number 29 using ehci-pci [114601.938715] usb 4-1.6: New USB device found, idVendor=1bcf, idProduct=0007 [114601.938730] usb 4-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [114601.938733] usb 4-1.6: Product: USB Optical Mouse [114601.944974] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:1BCF:0007.000E/input/input19 [114601.998037] hid-generic 0003:1BCF:0007.000E: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0 [115208.855151] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [115208.866907] cfg80211: World regulatory domain updated: [115208.866910] cfg80211: DFS Master region: unset [115208.866911] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [115208.866913] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [115208.866914] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [115208.866915] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [115208.866917] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [115208.866918] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [115208.866919] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [115208.866921] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [115208.866922] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [115208.888951] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115208.889038] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115208.889095] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115208.889207] pci_bus 0000:02: Allocating resources [115208.889226] pci_bus 0000:03: Allocating resources [115208.889242] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115208.889341] pci_bus 0000:01: Allocating resources [115208.889361] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115208.889401] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115208.889412] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115208.889480] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [115209.652100] PM: Syncing filesystems ... done. [115209.876394] PM: Preparing system for sleep (mem) [115210.155176] Freezing user space processes ... (elapsed 0.002 seconds) done. [115210.157545] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [115210.158890] PM: Suspending system (mem) [115210.158905] Suspending console(s) (use no_console_suspend to debug) [115210.159165] sd 0:0:0:0: [sda] Synchronizing SCSI cache [115210.159289] sd 0:0:0:0: [sda] Stopping disk [115210.791845] PM: suspend of devices complete after 633.158 msecs [115210.807901] PM: late suspend of devices complete after 16.059 msecs [115210.809799] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [115210.810305] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [115210.810352] r8169 0000:02:00.0: System wakeup enabled by ACPI [115210.810365] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [115210.824015] PM: noirq suspend of devices complete after 16.121 msecs [115210.824225] ACPI: Preparing to enter system sleep state S3 [115210.851750] ACPI : EC: EC stopped [115210.851751] PM: Saving platform NVS memory [115210.851792] Disabling non-boot CPUs ... [115210.853095] smpboot: CPU 1 is now offline [115210.881612] smpboot: CPU 2 is now offline [115210.897538] smpboot: CPU 3 is now offline [115210.917499] smpboot: CPU 4 is now offline [115210.937390] smpboot: CPU 5 is now offline [115210.952309] Broke affinity for irq 23 [115210.952323] Broke affinity for irq 26 [115210.953334] smpboot: CPU 6 is now offline [115210.972248] Broke affinity for irq 16 [115210.972256] Broke affinity for irq 23 [115210.972259] Broke affinity for irq 26 [115210.973271] smpboot: CPU 7 is now offline [115210.989327] ACPI: Low-level resume complete [115210.989371] ACPI : EC: EC started [115210.989372] PM: Restoring platform NVS memory [115210.990324] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [115210.990455] Enabling non-boot CPUs ... [115210.990505] x86: Booting SMP configuration: [115210.990506] smpboot: Booting Node 0 Processor 1 APIC 0x2 [115210.991903] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [115211.002216] cache: parent cpu1 should not be sleeping [115211.002364] CPU1 is up [115211.002389] smpboot: Booting Node 0 Processor 2 APIC 0x4 [115211.003785] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [115211.014247] cache: parent cpu2 should not be sleeping [115211.014391] CPU2 is up [115211.014414] smpboot: Booting Node 0 Processor 3 APIC 0x6 [115211.015812] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [115211.030291] cache: parent cpu3 should not be sleeping [115211.030438] CPU3 is up [115211.030462] smpboot: Booting Node 0 Processor 4 APIC 0x1 [115211.042214] cache: parent cpu4 should not be sleeping [115211.042318] CPU4 is up [115211.042337] smpboot: Booting Node 0 Processor 5 APIC 0x3 [115211.054235] cache: parent cpu5 should not be sleeping [115211.054338] CPU5 is up [115211.054357] smpboot: Booting Node 0 Processor 6 APIC 0x5 [115211.066255] cache: parent cpu6 should not be sleeping [115211.066357] CPU6 is up [115211.066375] smpboot: Booting Node 0 Processor 7 APIC 0x7 [115211.082327] cache: parent cpu7 should not be sleeping [115211.082432] CPU7 is up [115211.089615] ACPI: Waking up from system sleep state S3 [115211.402057] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [115211.402082] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [115211.402348] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [115211.402406] PM: noirq resume of devices complete after 16.353 msecs [115211.402835] PM: early resume of devices complete after 0.413 msecs [115211.402947] usb usb1: root hub lost power or was reset [115211.402948] usb usb2: root hub lost power or was reset [115211.402955] usb usb3: root hub lost power or was reset [115211.402977] usb usb4: root hub lost power or was reset [115211.403195] r8169 0000:02:00.0: System wakeup disabled by ACPI [115211.404207] ath: phy0: ASPM enabled: 0x43 [115211.405977] mei_me 0000:00:16.0: FW not ready: resetting. [115211.405988] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [115211.406866] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [115211.406868] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [115211.407018] sd 0:0:0:0: [sda] Starting disk [115211.511997] r8169 0000:02:00.0 enp2s0: link down [115211.545888] rtc_cmos 00:02: System wakeup disabled by ACPI [115211.721634] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [115211.733588] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [115211.735206] ata3.00: configured for UDMA/100 [115211.737590] usb 3-1: reset high-speed USB device number 2 using ehci-pci [115211.737642] usb 4-1: reset high-speed USB device number 2 using ehci-pci [115212.337258] usb 4-1.6: reset low-speed USB device number 29 using ehci-pci [115212.626391] PM: resume of devices complete after 1224.232 msecs [115212.626618] PM: Finishing wakeup. [115212.626619] Restarting tasks ... done. [115212.697030] usb 4-1.5: new high-speed USB device number 30 using ehci-pci [115212.827008] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [115212.951073] r8169 0000:02:00.0 enp2s0: link down [115212.951138] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [115212.952043] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [115212.970763] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [115213.041029] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [115213.048261] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [115213.048264] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [115213.048266] usb 4-1.5: Product: USB2.0-CRW [115213.048267] usb 4-1.5: Manufacturer: Generic [115213.048268] usb 4-1.5: SerialNumber: 20090516388200000 [115213.054313] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [115213.074918] scsi host35: usb-storage 4-1.5:1.0 [115213.243701] usb 4-1.5: USB disconnect, device number 30 [115213.408635] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [115213.409562] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [115213.409565] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [115213.409567] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [115213.411421] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [115213.411423] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [115213.411424] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [115213.412293] ata1.00: configured for UDMA/133 [115215.000225] wlp3s0: authenticate with 34:31:c4:6a:31:fb [115215.022097] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [115215.024581] wlp3s0: authenticated [115215.027729] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [115215.033105] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=3) [115215.033217] wlp3s0: associated [115215.033228] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [115215.035851] ath: EEPROM regdomain: 0x8114 [115215.035853] ath: EEPROM indicates we should expect a country code [115215.035854] ath: doing EEPROM country->regdmn map search [115215.035855] ath: country maps to regdmn code: 0x37 [115215.035856] ath: Country alpha2 being used: DE [115215.035857] ath: Regpair used: 0x37 [115215.035858] ath: regdomain 0x8114 dynamically updated by country IE [115215.035878] cfg80211: Regulatory domain changed to country: DE [115215.035878] cfg80211: DFS Master region: ETSI [115215.035879] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [115215.035881] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [115215.035882] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [115215.035884] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [115215.035885] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [115215.035886] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [117766.872617] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [117766.887723] cfg80211: World regulatory domain updated: [117766.887726] cfg80211: DFS Master region: unset [117766.887728] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [117766.887729] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [117766.887731] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [117766.887732] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [117766.887733] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [117766.887735] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [117766.887736] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [117766.887737] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [117766.887738] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [117766.924519] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117766.924612] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117766.924674] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117766.924794] pci_bus 0000:02: Allocating resources [117766.924813] pci_bus 0000:03: Allocating resources [117766.924826] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117766.924935] pci_bus 0000:01: Allocating resources [117766.924955] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117766.925016] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117766.925032] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117766.925120] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [117767.155856] PM: Syncing filesystems ... done. [117767.452230] PM: Preparing system for sleep (mem) [117767.827069] Freezing user space processes ... (elapsed 0.002 seconds) done. [117767.829542] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [117767.830885] PM: Suspending system (mem) [117767.830900] Suspending console(s) (use no_console_suspend to debug) [117767.831205] sd 0:0:0:0: [sda] Synchronizing SCSI cache [117767.831331] sd 0:0:0:0: [sda] Stopping disk [117768.491695] PM: suspend of devices complete after 660.994 msecs [117768.507658] PM: late suspend of devices complete after 15.956 msecs [117768.509267] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [117768.509790] r8169 0000:02:00.0: System wakeup enabled by ACPI [117768.509817] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [117768.509823] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [117768.523812] PM: noirq suspend of devices complete after 16.159 msecs [117768.524023] ACPI: Preparing to enter system sleep state S3 [117768.551549] ACPI : EC: EC stopped [117768.551550] PM: Saving platform NVS memory [117768.551589] Disabling non-boot CPUs ... [117768.552922] smpboot: CPU 1 is now offline [117768.573254] smpboot: CPU 2 is now offline [117768.597186] smpboot: CPU 3 is now offline [117768.617152] smpboot: CPU 4 is now offline [117768.637091] smpboot: CPU 5 is now offline [117768.656046] Broke affinity for irq 23 [117768.656049] Broke affinity for irq 26 [117768.657061] smpboot: CPU 6 is now offline [117768.676016] Broke affinity for irq 16 [117768.676024] Broke affinity for irq 23 [117768.676027] Broke affinity for irq 26 [117768.677043] smpboot: CPU 7 is now offline [117768.693138] ACPI: Low-level resume complete [117768.693183] ACPI : EC: EC started [117768.693183] PM: Restoring platform NVS memory [117768.694338] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [117768.694470] Enabling non-boot CPUs ... [117768.694519] x86: Booting SMP configuration: [117768.694520] smpboot: Booting Node 0 Processor 1 APIC 0x2 [117768.695917] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [117768.710243] cache: parent cpu1 should not be sleeping [117768.710389] CPU1 is up [117768.710414] smpboot: Booting Node 0 Processor 2 APIC 0x4 [117768.711810] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [117768.722252] cache: parent cpu2 should not be sleeping [117768.722396] CPU2 is up [117768.722419] smpboot: Booting Node 0 Processor 3 APIC 0x6 [117768.723816] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [117768.742286] cache: parent cpu3 should not be sleeping [117768.742428] CPU3 is up [117768.742452] smpboot: Booting Node 0 Processor 4 APIC 0x1 [117768.758208] cache: parent cpu4 should not be sleeping [117768.758313] CPU4 is up [117768.758333] smpboot: Booting Node 0 Processor 5 APIC 0x3 [117768.770230] cache: parent cpu5 should not be sleeping [117768.770329] CPU5 is up [117768.770348] smpboot: Booting Node 0 Processor 6 APIC 0x5 [117768.782256] cache: parent cpu6 should not be sleeping [117768.782355] CPU6 is up [117768.782373] smpboot: Booting Node 0 Processor 7 APIC 0x7 [117768.798324] cache: parent cpu7 should not be sleeping [117768.798424] CPU7 is up [117768.805589] ACPI: Waking up from system sleep state S3 [117769.118012] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [117769.118066] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [117769.118332] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [117769.118365] PM: noirq resume of devices complete after 16.302 msecs [117769.118734] PM: early resume of devices complete after 0.355 msecs [117769.118823] usb usb1: root hub lost power or was reset [117769.118824] usb usb2: root hub lost power or was reset [117769.118825] usb usb3: root hub lost power or was reset [117769.119042] usb usb4: root hub lost power or was reset [117769.121798] ath: phy0: ASPM enabled: 0x43 [117769.121950] r8169 0000:02:00.0: System wakeup disabled by ACPI [117769.122708] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [117769.122948] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [117769.129748] sd 0:0:0:0: [sda] Starting disk [117769.236051] r8169 0000:02:00.0 enp2s0: link down [117769.333922] rtc_cmos 00:02: System wakeup disabled by ACPI [117769.441665] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [117769.449617] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [117769.451243] ata3.00: configured for UDMA/100 [117769.453625] usb 4-1: reset high-speed USB device number 2 using ehci-pci [117769.453649] usb 3-1: reset high-speed USB device number 2 using ehci-pci [117769.795307] PM: resume of devices complete after 676.919 msecs [117769.795494] PM: Finishing wakeup. [117769.795495] Restarting tasks ... done. [117769.865370] usb 4-1.5: new high-speed USB device number 31 using ehci-pci [117769.999304] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [117770.111416] r8169 0000:02:00.0 enp2s0: link down [117770.111479] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [117770.112183] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [117770.130773] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [117770.201472] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [117770.217380] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [117770.217383] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [117770.217385] usb 4-1.5: Product: USB2.0-CRW [117770.217386] usb 4-1.5: Manufacturer: Generic [117770.217387] usb 4-1.5: SerialNumber: 20090516388200000 [117770.223237] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [117770.243067] scsi host36: usb-storage 4-1.5:1.0 [117770.243344] usb 4-1.6: USB disconnect, device number 29 [117770.449667] usb 4-1.5: USB disconnect, device number 31 [117771.120814] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [117771.121959] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [117771.121968] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [117771.121972] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [117771.124277] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [117771.124282] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [117771.124284] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [117771.125268] ata1.00: configured for UDMA/133 [117772.161227] wlp3s0: authenticate with 34:31:c4:6a:31:fb [117772.182852] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [117772.185358] wlp3s0: authenticated [117772.188206] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [117772.193766] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [117772.193888] wlp3s0: associated [117772.193901] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [117772.196463] ath: EEPROM regdomain: 0x8114 [117772.196465] ath: EEPROM indicates we should expect a country code [117772.196465] ath: doing EEPROM country->regdmn map search [117772.196466] ath: country maps to regdmn code: 0x37 [117772.196467] ath: Country alpha2 being used: DE [117772.196468] ath: Regpair used: 0x37 [117772.196469] ath: regdomain 0x8114 dynamically updated by country IE [117772.196489] cfg80211: Regulatory domain changed to country: DE [117772.196490] cfg80211: DFS Master region: ETSI [117772.196491] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [117772.196492] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [117772.196494] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [117772.196495] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [117772.196497] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [117772.196498] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [117798.102726] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [117798.102738] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [122002.348058] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [122002.359634] cfg80211: World regulatory domain updated: [122002.359637] cfg80211: DFS Master region: unset [122002.359638] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [122002.359640] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [122002.359641] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [122002.359642] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [122002.359643] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [122002.359645] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [122002.359646] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [122002.359647] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [122002.359648] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [122002.399442] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.399524] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.399579] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.399689] pci_bus 0000:02: Allocating resources [122002.399708] pci_bus 0000:03: Allocating resources [122002.399721] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.399816] pci_bus 0000:01: Allocating resources [122002.399837] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.399873] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.399883] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.399946] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [122002.640310] PM: Syncing filesystems ... done. [122002.914270] PM: Preparing system for sleep (mem) [122003.306563] Freezing user space processes ... (elapsed 0.002 seconds) done. [122003.308876] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [122003.310198] PM: Suspending system (mem) [122003.310213] Suspending console(s) (use no_console_suspend to debug) [122003.310425] sd 0:0:0:0: [sda] Synchronizing SCSI cache [122003.310558] sd 0:0:0:0: [sda] Stopping disk [122003.950588] PM: suspend of devices complete after 640.587 msecs [122003.966582] PM: late suspend of devices complete after 15.988 msecs [122003.968455] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [122003.968959] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [122003.969002] r8169 0000:02:00.0: System wakeup enabled by ACPI [122003.969021] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [122003.982709] PM: noirq suspend of devices complete after 16.133 msecs [122003.982919] ACPI: Preparing to enter system sleep state S3 [122004.010446] ACPI : EC: EC stopped [122004.010447] PM: Saving platform NVS memory [122004.010487] Disabling non-boot CPUs ... [122004.011964] smpboot: CPU 1 is now offline [122004.028311] smpboot: CPU 2 is now offline [122004.044234] smpboot: CPU 3 is now offline [122004.060002] smpboot: CPU 4 is now offline [122004.079974] smpboot: CPU 5 is now offline [122004.098964] Broke affinity for irq 23 [122004.098967] Broke affinity for irq 26 [122004.099978] smpboot: CPU 6 is now offline [122004.122909] Broke affinity for irq 16 [122004.122916] Broke affinity for irq 23 [122004.122919] Broke affinity for irq 26 [122004.123936] smpboot: CPU 7 is now offline [122004.140006] ACPI: Low-level resume complete [122004.140050] ACPI : EC: EC started [122004.140050] PM: Restoring platform NVS memory [122004.141023] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [122004.141155] Enabling non-boot CPUs ... [122004.141204] x86: Booting SMP configuration: [122004.141205] smpboot: Booting Node 0 Processor 1 APIC 0x2 [122004.142602] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [122004.156933] cache: parent cpu1 should not be sleeping [122004.157078] CPU1 is up [122004.157102] smpboot: Booting Node 0 Processor 2 APIC 0x4 [122004.158498] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [122004.168961] cache: parent cpu2 should not be sleeping [122004.169103] CPU2 is up [122004.169129] smpboot: Booting Node 0 Processor 3 APIC 0x6 [122004.170527] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [122004.184998] cache: parent cpu3 should not be sleeping [122004.185142] CPU3 is up [122004.185166] smpboot: Booting Node 0 Processor 4 APIC 0x1 [122004.196925] cache: parent cpu4 should not be sleeping [122004.197028] CPU4 is up [122004.197048] smpboot: Booting Node 0 Processor 5 APIC 0x3 [122004.208942] cache: parent cpu5 should not be sleeping [122004.209043] CPU5 is up [122004.209061] smpboot: Booting Node 0 Processor 6 APIC 0x5 [122004.220968] cache: parent cpu6 should not be sleeping [122004.221066] CPU6 is up [122004.221085] smpboot: Booting Node 0 Processor 7 APIC 0x7 [122004.233041] cache: parent cpu7 should not be sleeping [122004.233145] CPU7 is up [122004.240319] ACPI: Waking up from system sleep state S3 [122004.552652] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [122004.552672] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [122004.553011] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [122004.553060] PM: noirq resume of devices complete after 16.289 msecs [122004.553429] PM: early resume of devices complete after 0.355 msecs [122004.553531] usb usb3: root hub lost power or was reset [122004.553544] usb usb4: root hub lost power or was reset [122004.553566] usb usb1: root hub lost power or was reset [122004.553567] usb usb2: root hub lost power or was reset [122004.556495] ath: phy0: ASPM enabled: 0x43 [122004.556517] r8169 0000:02:00.0: System wakeup disabled by ACPI [122004.557053] mei_me 0000:00:16.0: FW not ready: resetting. [122004.557063] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [122004.557423] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [122004.557426] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [122004.557850] sd 0:0:0:0: [sda] Starting disk [122004.658741] r8169 0000:02:00.0 enp2s0: link down [122004.696567] rtc_cmos 00:02: System wakeup disabled by ACPI [122004.876441] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [122004.884311] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [122004.885914] ata3.00: configured for UDMA/100 [122004.888317] usb 4-1: reset high-speed USB device number 2 using ehci-pci [122004.888364] usb 3-1: reset high-speed USB device number 2 using ehci-pci [122005.228254] PM: resume of devices complete after 675.192 msecs [122005.228506] PM: Finishing wakeup. [122005.228507] Restarting tasks ... done. [122005.304054] usb 4-1.5: new high-speed USB device number 32 using ehci-pci [122005.438084] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [122005.538056] r8169 0000:02:00.0 enp2s0: link down [122005.538130] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [122005.539065] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [122005.558718] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [122005.642356] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [122005.651143] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [122005.651146] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [122005.651147] usb 4-1.5: Product: USB2.0-CRW [122005.651149] usb 4-1.5: Manufacturer: Generic [122005.651150] usb 4-1.5: SerialNumber: 20090516388200000 [122005.658860] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [122005.682218] scsi host37: usb-storage 4-1.5:1.0 [122005.885381] usb 4-1.5: USB disconnect, device number 32 [122006.559393] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [122006.560367] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [122006.560370] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [122006.560372] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [122006.562244] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [122006.562247] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [122006.562249] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [122006.563134] ata1.00: configured for UDMA/133 [122007.611436] wlp3s0: authenticate with 34:31:c4:6a:31:fb [122007.633245] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [122007.635693] wlp3s0: authenticated [122007.638789] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [122007.651441] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [122007.651570] wlp3s0: associated [122007.651580] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [122007.653980] ath: EEPROM regdomain: 0x8114 [122007.653982] ath: EEPROM indicates we should expect a country code [122007.653983] ath: doing EEPROM country->regdmn map search [122007.653984] ath: country maps to regdmn code: 0x37 [122007.653985] ath: Country alpha2 being used: DE [122007.653986] ath: Regpair used: 0x37 [122007.653987] ath: regdomain 0x8114 dynamically updated by country IE [122007.654007] cfg80211: Regulatory domain changed to country: DE [122007.654008] cfg80211: DFS Master region: ETSI [122007.654008] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [122007.654010] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [122007.654012] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [122007.654013] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [122007.654014] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [122007.654016] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [123684.038324] usb 4-1.6: new low-speed USB device number 33 using ehci-pci [123684.135406] usb 4-1.6: New USB device found, idVendor=1bcf, idProduct=0007 [123684.135413] usb 4-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [123684.135417] usb 4-1.6: Product: USB Optical Mouse [123684.142611] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:1BCF:0007.000F/input/input20 [123684.143407] hid-generic 0003:1BCF:0007.000F: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0 [126755.028892] usb 1-2: new full-speed USB device number 11 using xhci_hcd [126755.160141] usb 1-2: New USB device found, idVendor=28de, idProduct=1142 [126755.160148] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [126755.160151] usb 1-2: Product: Steam Controller [126755.160154] usb 1-2: Manufacturer: Valve Software [126755.160453] usb 1-2: ep 0x82 - rounding interval to 32 microframes, ep desc says 48 microframes [126755.160462] usb 1-2: ep 0x83 - rounding interval to 32 microframes, ep desc says 48 microframes [126755.160468] usb 1-2: ep 0x84 - rounding interval to 32 microframes, ep desc says 48 microframes [126755.160475] usb 1-2: ep 0x85 - rounding interval to 32 microframes, ep desc says 48 microframes [126755.163495] input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:28DE:1142.0010/input/input21 [126755.217738] hid-generic 0003:28DE:1142.0010: input,hidraw1: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-2/input0 [126755.220564] hid-generic 0003:28DE:1142.0011: hiddev0,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input1 [126755.223364] hid-generic 0003:28DE:1142.0012: hiddev0,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input2 [126755.225999] hid-generic 0003:28DE:1142.0013: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input3 [126755.228565] hid-generic 0003:28DE:1142.0014: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input4 [126758.713245] input: Microsoft X-Box 360 pad as /devices/virtual/input/input22 [126972.714504] input: Microsoft X-Box 360 pad as /devices/virtual/input/input23 [129134.118867] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [129134.134550] cfg80211: World regulatory domain updated: [129134.134557] cfg80211: DFS Master region: unset [129134.134559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [129134.134564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [129134.134567] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [129134.134570] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [129134.134573] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [129134.134577] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [129134.134580] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [129134.134583] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [129134.134586] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [129134.151442] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.151654] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.151766] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.151973] pci_bus 0000:02: Allocating resources [129134.152000] pci_bus 0000:03: Allocating resources [129134.152020] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.152234] pci_bus 0000:01: Allocating resources [129134.152244] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.152325] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.152350] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.152474] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [129134.391109] PM: Syncing filesystems ... done. [129134.586735] PM: Preparing system for sleep (mem) [129135.045986] Freezing user space processes ... (elapsed 0.003 seconds) done. [129135.049357] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [129135.050935] PM: Suspending system (mem) [129135.050964] Suspending console(s) (use no_console_suspend to debug) [129135.051981] sd 0:0:0:0: [sda] Synchronizing SCSI cache [129135.052109] sd 0:0:0:0: [sda] Stopping disk [129135.690624] PM: suspend of devices complete after 639.728 msecs [129135.706621] PM: late suspend of devices complete after 15.994 msecs [129135.709172] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [129135.710349] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [129135.710360] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [129135.710467] r8169 0000:02:00.0: System wakeup enabled by ACPI [129135.726543] PM: noirq suspend of devices complete after 19.928 msecs [129135.726946] ACPI: Preparing to enter system sleep state S3 [129135.754462] ACPI : EC: EC stopped [129135.754463] PM: Saving platform NVS memory [129135.754490] Disabling non-boot CPUs ... [129135.755970] smpboot: CPU 1 is now offline [129135.776702] smpboot: CPU 2 is now offline [129135.796777] smpboot: CPU 3 is now offline [129135.816659] smpboot: CPU 4 is now offline [129135.831361] Broke affinity for irq 23 [129135.832388] smpboot: CPU 5 is now offline [129135.851360] Broke affinity for irq 23 [129135.852386] smpboot: CPU 6 is now offline [129135.867229] Broke affinity for irq 16 [129135.867238] Broke affinity for irq 23 [129135.867242] Broke affinity for irq 26 [129135.868268] smpboot: CPU 7 is now offline [129135.884461] ACPI: Low-level resume complete [129135.884506] ACPI : EC: EC started [129135.884507] PM: Restoring platform NVS memory [129135.885473] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [129135.885602] Enabling non-boot CPUs ... [129135.885651] x86: Booting SMP configuration: [129135.885652] smpboot: Booting Node 0 Processor 1 APIC 0x2 [129135.887048] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [129135.897161] cache: parent cpu1 should not be sleeping [129135.897307] CPU1 is up [129135.897332] smpboot: Booting Node 0 Processor 2 APIC 0x4 [129135.898728] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [129135.909192] cache: parent cpu2 should not be sleeping [129135.909335] CPU2 is up [129135.909359] smpboot: Booting Node 0 Processor 3 APIC 0x6 [129135.910757] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [129135.925241] cache: parent cpu3 should not be sleeping [129135.925379] CPU3 is up [129135.925401] smpboot: Booting Node 0 Processor 4 APIC 0x1 [129135.941156] cache: parent cpu4 should not be sleeping [129135.941257] CPU4 is up [129135.941275] smpboot: Booting Node 0 Processor 5 APIC 0x3 [129135.953173] cache: parent cpu5 should not be sleeping [129135.953272] CPU5 is up [129135.953290] smpboot: Booting Node 0 Processor 6 APIC 0x5 [129135.969196] cache: parent cpu6 should not be sleeping [129135.969298] CPU6 is up [129135.969320] smpboot: Booting Node 0 Processor 7 APIC 0x7 [129135.981239] cache: parent cpu7 should not be sleeping [129135.981337] CPU7 is up [129135.988468] ACPI: Waking up from system sleep state S3 [129136.300878] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [129136.300901] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [129136.301093] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [129136.301232] PM: noirq resume of devices complete after 16.260 msecs [129136.301606] PM: early resume of devices complete after 0.359 msecs [129136.301716] usb usb1: root hub lost power or was reset [129136.301717] usb usb3: root hub lost power or was reset [129136.301718] usb usb2: root hub lost power or was reset [129136.301750] usb usb4: root hub lost power or was reset [129136.301793] r8169 0000:02:00.0: System wakeup disabled by ACPI [129136.301808] ath: phy0: ASPM enabled: 0x43 [129136.305602] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [129136.305658] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [129136.306062] sd 0:0:0:0: [sda] Starting disk [129136.426975] r8169 0000:02:00.0 enp2s0: link down [129136.444802] rtc_cmos 00:02: System wakeup disabled by ACPI [129136.620626] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [129136.632549] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [129136.634158] ata3.00: configured for UDMA/100 [129136.636547] usb 4-1: reset high-speed USB device number 2 using ehci-pci [129136.636561] usb 3-1: reset high-speed USB device number 2 using ehci-pci [129136.860552] usb 1-2: reset full-speed USB device number 11 using xhci_hcd [129136.990027] usb 1-2: ep 0x82 - rounding interval to 32 microframes, ep desc says 48 microframes [129136.990033] usb 1-2: ep 0x83 - rounding interval to 32 microframes, ep desc says 48 microframes [129136.990039] usb 1-2: ep 0x84 - rounding interval to 32 microframes, ep desc says 48 microframes [129136.990045] usb 1-2: ep 0x85 - rounding interval to 32 microframes, ep desc says 48 microframes [129137.236234] usb 4-1.6: reset low-speed USB device number 33 using ehci-pci [129137.525930] PM: resume of devices complete after 1224.973 msecs [129137.528327] hid-generic 0003:28DE:1142.0015: hiddev0,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input1 [129137.530578] hid-generic 0003:28DE:1142.0016: hiddev0,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input2 [129137.532609] hid-generic 0003:28DE:1142.0017: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input3 [129137.534698] hid-generic 0003:28DE:1142.0018: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-2/input4 [129137.534875] PM: Finishing wakeup. [129137.534876] Restarting tasks ... done. [129137.536429] usb 1-2: usbfs: process 10565 (CSteamControlle) did not claim interface 1 before use [129137.536442] usb 1-2: usbfs: process 10565 (CSteamControlle) did not claim interface 2 before use [129137.536447] usb 1-2: usbfs: process 10565 (CSteamControlle) did not claim interface 3 before use [129137.536452] usb 1-2: usbfs: process 10565 (CSteamControlle) did not claim interface 4 before use [129137.612012] usb 4-1.5: new high-speed USB device number 34 using ehci-pci [129137.734254] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [129137.861981] r8169 0000:02:00.0 enp2s0: link down [129137.862060] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [129137.862714] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [129137.881387] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [129137.936103] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [129137.962029] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [129137.962032] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [129137.962034] usb 4-1.5: Product: USB2.0-CRW [129137.962035] usb 4-1.5: Manufacturer: Generic [129137.962037] usb 4-1.5: SerialNumber: 20090516388200000 [129137.967682] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [129137.986520] scsi host38: usb-storage 4-1.5:1.0 [129138.147570] usb 4-1.5: USB disconnect, device number 34 [129138.303646] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [129138.304576] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [129138.304579] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [129138.304581] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [129138.306444] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [129138.306447] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [129138.306449] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [129138.307311] ata1.00: configured for UDMA/133 [129139.895562] wlp3s0: authenticate with 34:31:c4:6a:31:fb [129139.917243] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [129139.919744] wlp3s0: authenticated [129139.922768] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [129139.934093] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [129139.934195] wlp3s0: associated [129139.934227] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [129139.936584] ath: EEPROM regdomain: 0x8114 [129139.936586] ath: EEPROM indicates we should expect a country code [129139.936586] ath: doing EEPROM country->regdmn map search [129139.936587] ath: country maps to regdmn code: 0x37 [129139.936588] ath: Country alpha2 being used: DE [129139.936589] ath: Regpair used: 0x37 [129139.936590] ath: regdomain 0x8114 dynamically updated by country IE [129139.936610] cfg80211: Regulatory domain changed to country: DE [129139.936611] cfg80211: DFS Master region: ETSI [129139.936612] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [129139.936614] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [129139.936615] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [129139.936616] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [129139.936618] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [129139.936619] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [129142.840961] usb 1-2: USB disconnect, device number 11 [129165.285323] mei_me 0000:00:16.0: timer: init clients timeout hbm_state = 1. [129165.285339] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 [129739.175411] TEC[12282]: segfault at 0 ip 00007f13cdda8758 sp 00007ffc40744530 error 4 in libstdc++.so.6.0.21[7f13cdcd8000+173000] [136739.141462] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [136739.153301] cfg80211: World regulatory domain updated: [136739.153305] cfg80211: DFS Master region: unset [136739.153306] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [136739.153309] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [136739.153311] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [136739.153312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [136739.153315] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [136739.153317] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [136739.153319] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [136739.153321] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [136739.153323] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [136739.183170] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.183265] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.183335] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.183485] pci_bus 0000:02: Allocating resources [136739.183505] pci_bus 0000:03: Allocating resources [136739.183521] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.183668] pci_bus 0000:01: Allocating resources [136739.183676] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.183723] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.183734] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.183830] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [136739.427394] PM: Syncing filesystems ... done. [136739.731697] PM: Preparing system for sleep (mem) [136740.006434] Freezing user space processes ... (elapsed 0.002 seconds) done. [136740.008731] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [136740.009954] PM: Suspending system (mem) [136740.009970] Suspending console(s) (use no_console_suspend to debug) [136740.010227] sd 0:0:0:0: [sda] Synchronizing SCSI cache [136740.010364] sd 0:0:0:0: [sda] Stopping disk [136740.645846] PM: suspend of devices complete after 636.054 msecs [136740.661828] PM: late suspend of devices complete after 15.984 msecs [136740.663516] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [136740.663773] r8169 0000:02:00.0: System wakeup enabled by ACPI [136740.663822] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [136740.663829] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [136740.677967] PM: noirq suspend of devices complete after 16.145 msecs [136740.678177] ACPI: Preparing to enter system sleep state S3 [136740.705698] ACPI : EC: EC stopped [136740.705699] PM: Saving platform NVS memory [136740.705740] Disabling non-boot CPUs ... [136740.707078] smpboot: CPU 1 is now offline [136740.727382] smpboot: CPU 2 is now offline [136740.747351] smpboot: CPU 3 is now offline [136740.767278] smpboot: CPU 4 is now offline [136740.786231] Broke affinity for irq 23 [136740.787244] smpboot: CPU 5 is now offline [136740.810177] Broke affinity for irq 23 [136740.810180] Broke affinity for irq 26 [136740.811191] smpboot: CPU 6 is now offline [136740.830172] Broke affinity for irq 16 [136740.830182] Broke affinity for irq 23 [136740.830187] Broke affinity for irq 26 [136740.831206] smpboot: CPU 7 is now offline [136740.847152] ACPI: Low-level resume complete [136740.847196] ACPI : EC: EC started [136740.847197] PM: Restoring platform NVS memory [136740.848199] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [136740.848332] Enabling non-boot CPUs ... [136740.848382] x86: Booting SMP configuration: [136740.848383] smpboot: Booting Node 0 Processor 1 APIC 0x2 [136740.849780] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [136740.864135] cache: parent cpu1 should not be sleeping [136740.864281] CPU1 is up [136740.864306] smpboot: Booting Node 0 Processor 2 APIC 0x4 [136740.865702] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [136740.876162] cache: parent cpu2 should not be sleeping [136740.876303] CPU2 is up [136740.876325] smpboot: Booting Node 0 Processor 3 APIC 0x6 [136740.877724] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [136740.892204] cache: parent cpu3 should not be sleeping [136740.892347] CPU3 is up [136740.892371] smpboot: Booting Node 0 Processor 4 APIC 0x1 [136740.908127] cache: parent cpu4 should not be sleeping [136740.908235] CPU4 is up [136740.908263] smpboot: Booting Node 0 Processor 5 APIC 0x3 [136740.920144] cache: parent cpu5 should not be sleeping [136740.920243] CPU5 is up [136740.920262] smpboot: Booting Node 0 Processor 6 APIC 0x5 [136740.932166] cache: parent cpu6 should not be sleeping [136740.932267] CPU6 is up [136740.932285] smpboot: Booting Node 0 Processor 7 APIC 0x7 [136740.944232] cache: parent cpu7 should not be sleeping [136740.944332] CPU7 is up [136740.951495] ACPI: Waking up from system sleep state S3 [136741.263984] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [136741.264018] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [136741.264271] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [136741.264303] PM: noirq resume of devices complete after 16.335 msecs [136741.264812] PM: early resume of devices complete after 0.397 msecs [136741.264912] usb usb1: root hub lost power or was reset [136741.264914] usb usb2: root hub lost power or was reset [136741.264918] usb usb3: root hub lost power or was reset [136741.264938] usb usb4: root hub lost power or was reset [136741.265040] r8169 0000:02:00.0: System wakeup disabled by ACPI [136741.265973] ath: phy0: ASPM enabled: 0x43 [136741.267350] mei_me 0000:00:16.0: FW not ready: resetting. [136741.267360] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [136741.268814] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [136741.268835] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [136741.269088] sd 0:0:0:0: [sda] Starting disk [136741.393969] r8169 0000:02:00.0 enp2s0: link down [136741.479766] rtc_cmos 00:02: System wakeup disabled by ACPI [136741.587581] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [136741.595534] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [136741.597152] ata3.00: configured for UDMA/100 [136741.599549] usb 4-1: reset high-speed USB device number 2 using ehci-pci [136741.599567] usb 3-1: reset high-speed USB device number 2 using ehci-pci [136741.941197] PM: resume of devices complete after 676.731 msecs [136741.941409] PM: Finishing wakeup. [136741.941410] Restarting tasks ... done. [136742.015733] usb 4-1.5: new high-speed USB device number 35 using ehci-pci [136742.233577] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [136742.345262] r8169 0000:02:00.0 enp2s0: link down [136742.345326] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [136742.346020] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [136742.364638] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [136742.368066] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [136742.368069] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [136742.368070] usb 4-1.5: Product: USB2.0-CRW [136742.368072] usb 4-1.5: Manufacturer: Generic [136742.368073] usb 4-1.5: SerialNumber: 20090516388200000 [136742.373857] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [136742.393080] scsi host39: usb-storage 4-1.5:1.0 [136742.393388] usb 4-1.6: USB disconnect, device number 33 [136742.439483] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [136742.600838] usb 4-1.5: USB disconnect, device number 35 [136743.266645] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [136743.267612] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [136743.267615] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [136743.267617] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [136743.269448] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [136743.269450] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [136743.269452] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [136743.270308] ata1.00: configured for UDMA/133 [136744.402875] wlp3s0: authenticate with 34:31:c4:6a:31:fb [136744.424686] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [136744.427297] wlp3s0: authenticated [136744.430069] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [136744.441151] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=3) [136744.441268] wlp3s0: associated [136744.441279] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [136744.444071] ath: EEPROM regdomain: 0x8114 [136744.444074] ath: EEPROM indicates we should expect a country code [136744.444075] ath: doing EEPROM country->regdmn map search [136744.444076] ath: country maps to regdmn code: 0x37 [136744.444077] ath: Country alpha2 being used: DE [136744.444077] ath: Regpair used: 0x37 [136744.444079] ath: regdomain 0x8114 dynamically updated by country IE [136744.444099] cfg80211: Regulatory domain changed to country: DE [136744.444099] cfg80211: DFS Master region: ETSI [136744.444101] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [136744.444102] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [136744.444104] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [136744.444105] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [136744.444106] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [136744.444107] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [142733.703473] usb 4-1.6: new low-speed USB device number 36 using ehci-pci [142733.800634] usb 4-1.6: New USB device found, idVendor=1bcf, idProduct=0007 [142733.800641] usb 4-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [142733.800645] usb 4-1.6: Product: USB Optical Mouse [142733.808072] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:1BCF:0007.0019/input/input24 [142733.864101] hid-generic 0003:1BCF:0007.0019: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0 [152128.678149] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [152128.691437] cfg80211: World regulatory domain updated: [152128.691442] cfg80211: DFS Master region: unset [152128.691444] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [152128.691448] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [152128.691451] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [152128.691453] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [152128.691456] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [152128.691459] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [152128.691462] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [152128.691464] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [152128.691466] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [152128.709270] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.709413] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.709513] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.709714] pci_bus 0000:02: Allocating resources [152128.709741] pci_bus 0000:03: Allocating resources [152128.709760] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.709939] pci_bus 0000:01: Allocating resources [152128.709959] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.710025] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.710043] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.710190] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [152128.962685] PM: Syncing filesystems ... done. [152129.294756] PM: Preparing system for sleep (mem) [152129.743489] Freezing user space processes ... (elapsed 0.003 seconds) done. [152129.747097] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [152129.748506] PM: Suspending system (mem) [152129.748559] Suspending console(s) (use no_console_suspend to debug) [152129.749527] sd 0:0:0:0: [sda] Synchronizing SCSI cache [152129.749674] sd 0:0:0:0: [sda] Stopping disk [152130.364373] PM: suspend of devices complete after 615.879 msecs [152130.380340] PM: late suspend of devices complete after 15.965 msecs [152130.382889] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [152130.383139] r8169 0000:02:00.0: System wakeup enabled by ACPI [152130.383281] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [152130.383351] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [152130.396521] PM: noirq suspend of devices complete after 16.184 msecs [152130.396933] ACPI: Preparing to enter system sleep state S3 [152130.424213] ACPI : EC: EC stopped [152130.424214] PM: Saving platform NVS memory [152130.424249] Disabling non-boot CPUs ... [152130.425801] smpboot: CPU 1 is now offline [152130.442619] smpboot: CPU 2 is now offline [152130.458166] smpboot: CPU 3 is now offline [152130.478324] smpboot: CPU 4 is now offline [152130.497199] Broke affinity for irq 23 [152130.498230] smpboot: CPU 5 is now offline [152130.513130] Broke affinity for irq 23 [152130.513134] Broke affinity for irq 26 [152130.514159] smpboot: CPU 6 is now offline [152130.532873] Broke affinity for irq 16 [152130.532881] Broke affinity for irq 23 [152130.532885] Broke affinity for irq 26 [152130.533909] smpboot: CPU 7 is now offline [152130.554153] ACPI: Low-level resume complete [152130.554198] ACPI : EC: EC started [152130.554198] PM: Restoring platform NVS memory [152130.555177] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [152130.555311] Enabling non-boot CPUs ... [152130.555359] x86: Booting SMP configuration: [152130.555360] smpboot: Booting Node 0 Processor 1 APIC 0x2 [152130.556757] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [152130.566934] cache: parent cpu1 should not be sleeping [152130.567080] CPU1 is up [152130.567104] smpboot: Booting Node 0 Processor 2 APIC 0x4 [152130.568499] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [152130.578959] cache: parent cpu2 should not be sleeping [152130.579100] CPU2 is up [152130.579123] smpboot: Booting Node 0 Processor 3 APIC 0x6 [152130.580521] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [152130.595005] cache: parent cpu3 should not be sleeping [152130.595142] CPU3 is up [152130.595165] smpboot: Booting Node 0 Processor 4 APIC 0x1 [152130.606929] cache: parent cpu4 should not be sleeping [152130.607029] CPU4 is up [152130.607046] smpboot: Booting Node 0 Processor 5 APIC 0x3 [152130.622948] cache: parent cpu5 should not be sleeping [152130.623047] CPU5 is up [152130.623064] smpboot: Booting Node 0 Processor 6 APIC 0x5 [152130.634966] cache: parent cpu6 should not be sleeping [152130.635060] CPU6 is up [152130.635078] smpboot: Booting Node 0 Processor 7 APIC 0x7 [152130.647036] cache: parent cpu7 should not be sleeping [152130.647135] CPU7 is up [152130.654268] ACPI: Waking up from system sleep state S3 [152130.966829] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [152130.966846] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [152130.967066] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [152130.967100] PM: noirq resume of devices complete after 16.354 msecs [152130.967470] PM: early resume of devices complete after 0.355 msecs [152130.967570] usb usb3: root hub lost power or was reset [152130.967598] usb usb1: root hub lost power or was reset [152130.967600] usb usb2: root hub lost power or was reset [152130.967695] usb usb4: root hub lost power or was reset [152130.970511] ath: phy0: ASPM enabled: 0x43 [152130.970638] r8169 0000:02:00.0: System wakeup disabled by ACPI [152130.971472] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [152130.971507] sd 0:0:0:0: [sda] Starting disk [152130.971592] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [152130.973116] mei_me 0000:00:16.0: FW not ready: resetting. [152130.973127] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [152131.096763] r8169 0000:02:00.0 enp2s0: link down [152131.110576] rtc_cmos 00:02: System wakeup disabled by ACPI [152131.290334] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [152131.290424] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [152131.291928] ata3.00: configured for UDMA/100 [152131.302386] usb 3-1: reset high-speed USB device number 2 using ehci-pci [152131.302388] usb 4-1: reset high-speed USB device number 2 using ehci-pci [152131.902089] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [152132.191540] PM: resume of devices complete after 1224.705 msecs [152132.191710] PM: Finishing wakeup. [152132.191711] Restarting tasks ... done. [152132.277768] usb 4-1.5: new high-speed USB device number 37 using ehci-pci [152132.395932] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [152132.495796] r8169 0000:02:00.0 enp2s0: link down [152132.495866] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [152132.496571] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [152132.515284] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [152132.570659] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [152132.622117] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [152132.622122] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [152132.622125] usb 4-1.5: Product: USB2.0-CRW [152132.622127] usb 4-1.5: Manufacturer: Generic [152132.622129] usb 4-1.5: SerialNumber: 20090516388200000 [152132.628435] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [152132.648661] scsi host40: usb-storage 4-1.5:1.0 [152132.817302] usb 4-1.5: USB disconnect, device number 37 [152132.977436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [152132.978444] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [152132.978452] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [152132.978457] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [152132.980509] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [152132.980516] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [152132.980520] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [152132.981395] ata1.00: configured for UDMA/133 [152134.525120] wlp3s0: authenticate with 34:31:c4:6a:31:fb [152134.546796] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [152134.549362] wlp3s0: authenticated [152134.552622] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [152134.565617] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [152134.565721] wlp3s0: associated [152134.565733] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [152134.568891] ath: EEPROM regdomain: 0x8114 [152134.568894] ath: EEPROM indicates we should expect a country code [152134.568895] ath: doing EEPROM country->regdmn map search [152134.568896] ath: country maps to regdmn code: 0x37 [152134.568897] ath: Country alpha2 being used: DE [152134.568897] ath: Regpair used: 0x37 [152134.568899] ath: regdomain 0x8114 dynamically updated by country IE [152134.568919] cfg80211: Regulatory domain changed to country: DE [152134.568920] cfg80211: DFS Master region: ETSI [152134.568921] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [152134.568922] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [152134.568924] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [152134.568925] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [152134.568927] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [152134.568928] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [156036.798782] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [156036.810034] cfg80211: World regulatory domain updated: [156036.810041] cfg80211: DFS Master region: unset [156036.810042] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [156036.810045] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [156036.810046] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [156036.810047] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [156036.810049] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [156036.810051] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [156036.810052] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [156036.810053] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [156036.810054] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [156036.853719] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156036.853802] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156036.853856] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156036.853965] pci_bus 0000:02: Allocating resources [156036.853983] pci_bus 0000:03: Allocating resources [156036.853996] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156036.854110] pci_bus 0000:01: Allocating resources [156036.854116] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156036.854153] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156036.854163] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156036.854227] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [156037.665742] PM: Syncing filesystems ... done. [156037.901312] PM: Preparing system for sleep (mem) [156038.154184] Freezing user space processes ... (elapsed 0.002 seconds) done. [156038.156527] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [156038.157749] PM: Suspending system (mem) [156038.157765] Suspending console(s) (use no_console_suspend to debug) [156038.158516] sd 0:0:0:0: [sda] Synchronizing SCSI cache [156038.158640] sd 0:0:0:0: [sda] Stopping disk [156038.780609] PM: suspend of devices complete after 623.068 msecs [156038.796613] PM: late suspend of devices complete after 15.997 msecs [156038.798138] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [156038.798352] r8169 0000:02:00.0: System wakeup enabled by ACPI [156038.798466] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [156038.798474] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [156038.812748] PM: noirq suspend of devices complete after 16.141 msecs [156038.812958] ACPI: Preparing to enter system sleep state S3 [156038.840472] ACPI : EC: EC stopped [156038.840473] PM: Saving platform NVS memory [156038.840513] Disabling non-boot CPUs ... [156038.841987] smpboot: CPU 1 is now offline [156038.858168] smpboot: CPU 2 is now offline [156038.874268] smpboot: CPU 3 is now offline [156038.890061] smpboot: CPU 4 is now offline [156038.908991] Broke affinity for irq 23 [156038.910003] smpboot: CPU 5 is now offline [156038.928972] Broke affinity for irq 23 [156038.928975] Broke affinity for irq 26 [156038.929984] smpboot: CPU 6 is now offline [156038.944959] Broke affinity for irq 16 [156038.944968] Broke affinity for irq 23 [156038.944973] Broke affinity for irq 26 [156038.945987] smpboot: CPU 7 is now offline [156038.961924] ACPI: Low-level resume complete [156038.961970] ACPI : EC: EC started [156038.961970] PM: Restoring platform NVS memory [156038.962909] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [156038.963042] Enabling non-boot CPUs ... [156038.963090] x86: Booting SMP configuration: [156038.963091] smpboot: Booting Node 0 Processor 1 APIC 0x2 [156038.964487] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [156038.978844] cache: parent cpu1 should not be sleeping [156038.978991] CPU1 is up [156038.979015] smpboot: Booting Node 0 Processor 2 APIC 0x4 [156038.980412] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [156038.990877] cache: parent cpu2 should not be sleeping [156038.991020] CPU2 is up [156038.991044] smpboot: Booting Node 0 Processor 3 APIC 0x6 [156038.992442] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [156039.006918] cache: parent cpu3 should not be sleeping [156039.007059] CPU3 is up [156039.007083] smpboot: Booting Node 0 Processor 4 APIC 0x1 [156039.018840] cache: parent cpu4 should not be sleeping [156039.018943] CPU4 is up [156039.018962] smpboot: Booting Node 0 Processor 5 APIC 0x3 [156039.030855] cache: parent cpu5 should not be sleeping [156039.030958] CPU5 is up [156039.030976] smpboot: Booting Node 0 Processor 6 APIC 0x5 [156039.046878] cache: parent cpu6 should not be sleeping [156039.046979] CPU6 is up [156039.046997] smpboot: Booting Node 0 Processor 7 APIC 0x7 [156039.058943] cache: parent cpu7 should not be sleeping [156039.059043] CPU7 is up [156039.066196] ACPI: Waking up from system sleep state S3 [156039.378711] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [156039.378799] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [156039.378993] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [156039.379024] PM: noirq resume of devices complete after 16.350 msecs [156039.379407] PM: early resume of devices complete after 0.369 msecs [156039.379508] usb usb3: root hub lost power or was reset [156039.379530] usb usb1: root hub lost power or was reset [156039.379531] usb usb2: root hub lost power or was reset [156039.379545] usb usb4: root hub lost power or was reset [156039.379648] ath: phy0: ASPM enabled: 0x43 [156039.379652] r8169 0000:02:00.0: System wakeup disabled by ACPI [156039.383395] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [156039.383451] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [156039.383574] sd 0:0:0:0: [sda] Starting disk [156039.487773] mei_me 0000:00:16.0: FW not ready: resetting. [156039.487787] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [156039.496663] r8169 0000:02:00.0 enp2s0: link down [156039.522563] rtc_cmos 00:02: System wakeup disabled by ACPI [156039.698216] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [156039.698314] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [156039.699831] ata3.00: configured for UDMA/100 [156039.714277] usb 3-1: reset high-speed USB device number 2 using ehci-pci [156039.714278] usb 4-1: reset high-speed USB device number 2 using ehci-pci [156040.313873] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [156040.603408] PM: resume of devices complete after 1224.689 msecs [156040.603639] PM: Finishing wakeup. [156040.603640] Restarting tasks ... done. [156040.673635] usb 4-1.5: new high-speed USB device number 38 using ehci-pci [156040.803869] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [156040.923612] r8169 0000:02:00.0 enp2s0: link down [156040.923667] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [156040.924381] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [156040.943026] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [156040.997463] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [156041.024307] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [156041.024311] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [156041.024313] usb 4-1.5: Product: USB2.0-CRW [156041.024315] usb 4-1.5: Manufacturer: Generic [156041.024317] usb 4-1.5: SerialNumber: 20090516388200000 [156041.030111] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [156041.049580] scsi host41: usb-storage 4-1.5:1.0 [156041.231229] usb 4-1.5: USB disconnect, device number 38 [156041.389275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [156041.390471] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [156041.390476] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [156041.390478] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [156041.392530] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [156041.392547] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [156041.392549] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [156041.393471] ata1.00: configured for UDMA/133 [156043.116951] wlp3s0: authenticate with 34:31:c4:6a:31:fb [156043.138719] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [156043.141243] wlp3s0: authenticated [156043.144265] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [156043.155345] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [156043.155448] wlp3s0: associated [156043.155460] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [156043.157842] ath: EEPROM regdomain: 0x8114 [156043.157845] ath: EEPROM indicates we should expect a country code [156043.157846] ath: doing EEPROM country->regdmn map search [156043.157846] ath: country maps to regdmn code: 0x37 [156043.157847] ath: Country alpha2 being used: DE [156043.157848] ath: Regpair used: 0x37 [156043.157849] ath: regdomain 0x8114 dynamically updated by country IE [156043.157869] cfg80211: Regulatory domain changed to country: DE [156043.157870] cfg80211: DFS Master region: ETSI [156043.157871] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [156043.157872] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [156043.157874] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [156043.157875] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [156043.157877] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [156043.157878] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [157149.996900] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [157150.008453] cfg80211: World regulatory domain updated: [157150.008456] cfg80211: DFS Master region: unset [157150.008457] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [157150.008459] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [157150.008460] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [157150.008461] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [157150.008463] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [157150.008464] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [157150.008465] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [157150.008466] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [157150.008467] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [157150.031992] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.032076] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.032132] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.032331] pci_bus 0000:02: Allocating resources [157150.032373] pci_bus 0000:03: Allocating resources [157150.032408] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.032549] pci_bus 0000:01: Allocating resources [157150.032572] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.032620] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.032641] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.032709] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [157150.261103] PM: Syncing filesystems ... done. [157150.444755] PM: Preparing system for sleep (mem) [157150.978626] Freezing user space processes ... (elapsed 0.002 seconds) done. [157150.980942] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [157150.982169] PM: Suspending system (mem) [157150.982185] Suspending console(s) (use no_console_suspend to debug) [157150.982414] sd 0:0:0:0: [sda] Synchronizing SCSI cache [157150.992312] sd 0:0:0:0: [sda] Stopping disk [157151.619119] PM: suspend of devices complete after 637.163 msecs [157151.635104] PM: late suspend of devices complete after 15.979 msecs [157151.637204] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [157151.637574] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [157151.637626] r8169 0000:02:00.0: System wakeup enabled by ACPI [157151.637636] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [157151.651282] PM: noirq suspend of devices complete after 16.184 msecs [157151.651502] ACPI: Preparing to enter system sleep state S3 [157151.678970] ACPI : EC: EC stopped [157151.678970] PM: Saving platform NVS memory [157151.678992] Disabling non-boot CPUs ... [157151.680366] smpboot: CPU 1 is now offline [157151.700793] smpboot: CPU 2 is now offline [157151.716765] smpboot: CPU 3 is now offline [157151.732579] smpboot: CPU 4 is now offline [157151.751476] Broke affinity for irq 23 [157151.752488] smpboot: CPU 5 is now offline [157151.771500] Broke affinity for irq 23 [157151.771505] Broke affinity for irq 26 [157151.772528] smpboot: CPU 6 is now offline [157151.795419] Broke affinity for irq 16 [157151.795427] Broke affinity for irq 23 [157151.795430] Broke affinity for irq 26 [157151.796445] smpboot: CPU 7 is now offline [157151.812521] ACPI: Low-level resume complete [157151.812566] ACPI : EC: EC started [157151.812566] PM: Restoring platform NVS memory [157151.813660] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [157151.813793] Enabling non-boot CPUs ... [157151.813841] x86: Booting SMP configuration: [157151.813842] smpboot: Booting Node 0 Processor 1 APIC 0x2 [157151.815240] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [157151.825566] cache: parent cpu1 should not be sleeping [157151.825715] CPU1 is up [157151.825740] smpboot: Booting Node 0 Processor 2 APIC 0x4 [157151.827136] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [157151.837597] cache: parent cpu2 should not be sleeping [157151.837741] CPU2 is up [157151.837765] smpboot: Booting Node 0 Processor 3 APIC 0x6 [157151.839163] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [157151.853635] cache: parent cpu3 should not be sleeping [157151.853779] CPU3 is up [157151.853803] smpboot: Booting Node 0 Processor 4 APIC 0x1 [157151.865560] cache: parent cpu4 should not be sleeping [157151.865663] CPU4 is up [157151.865681] smpboot: Booting Node 0 Processor 5 APIC 0x3 [157151.877576] cache: parent cpu5 should not be sleeping [157151.877677] CPU5 is up [157151.877696] smpboot: Booting Node 0 Processor 6 APIC 0x5 [157151.889598] cache: parent cpu6 should not be sleeping [157151.889698] CPU6 is up [157151.889716] smpboot: Booting Node 0 Processor 7 APIC 0x7 [157151.905665] cache: parent cpu7 should not be sleeping [157151.905765] CPU7 is up [157151.912925] ACPI: Waking up from system sleep state S3 [157152.225434] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [157152.225635] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [157152.225689] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [157152.225718] PM: noirq resume of devices complete after 16.321 msecs [157152.226110] PM: early resume of devices complete after 0.377 msecs [157152.226202] usb usb1: root hub lost power or was reset [157152.226203] usb usb2: root hub lost power or was reset [157152.226205] usb usb3: root hub lost power or was reset [157152.226220] usb usb4: root hub lost power or was reset [157152.227286] r8169 0000:02:00.0: System wakeup disabled by ACPI [157152.227504] ath: phy0: ASPM enabled: 0x43 [157152.229711] mei_me 0000:00:16.0: FW not ready: resetting. [157152.229724] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [157152.230092] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [157152.230130] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [157152.230301] sd 0:0:0:0: [sda] Starting disk [157152.331359] r8169 0000:02:00.0 enp2s0: link down [157152.369194] rtc_cmos 00:02: System wakeup disabled by ACPI [157152.545052] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [157152.556924] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [157152.558539] ata3.00: configured for UDMA/100 [157152.560937] usb 4-1: reset high-speed USB device number 2 using ehci-pci [157152.560947] usb 3-1: reset high-speed USB device number 2 using ehci-pci [157153.160583] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [157153.450270] PM: resume of devices complete after 1224.861 msecs [157153.450455] PM: Finishing wakeup. [157153.450455] Restarting tasks ... done. [157153.520340] usb 4-1.5: new high-speed USB device number 39 using ehci-pci [157153.674335] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [157153.798362] r8169 0000:02:00.0 enp2s0: link down [157153.798435] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [157153.799255] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [157153.817968] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [157153.871449] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [157153.871458] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [157153.871463] usb 4-1.5: Product: USB2.0-CRW [157153.871465] usb 4-1.5: Manufacturer: Generic [157153.871466] usb 4-1.5: SerialNumber: 20090516388200000 [157153.877579] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [157153.893768] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [157153.903440] scsi host42: usb-storage 4-1.5:1.0 [157154.079934] usb 4-1.5: USB disconnect, device number 39 [157154.227940] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [157154.228889] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [157154.228892] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [157154.228894] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [157154.230788] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [157154.230791] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [157154.230793] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [157154.231654] ata1.00: configured for UDMA/133 [157155.851578] wlp3s0: authenticate with 34:31:c4:6a:31:fb [157155.873356] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [157155.875859] wlp3s0: authenticated [157155.878991] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [157155.885920] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=3) [157155.886028] wlp3s0: associated [157155.886037] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [157155.888391] ath: EEPROM regdomain: 0x8114 [157155.888394] ath: EEPROM indicates we should expect a country code [157155.888395] ath: doing EEPROM country->regdmn map search [157155.888396] ath: country maps to regdmn code: 0x37 [157155.888397] ath: Country alpha2 being used: DE [157155.888397] ath: Regpair used: 0x37 [157155.888398] ath: regdomain 0x8114 dynamically updated by country IE [157155.888418] cfg80211: Regulatory domain changed to country: DE [157155.888419] cfg80211: DFS Master region: ETSI [157155.888420] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [157155.888422] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [157155.888423] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [157155.888425] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [157155.888426] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [157155.888427] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [159492.997995] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [159493.009672] cfg80211: World regulatory domain updated: [159493.009675] cfg80211: DFS Master region: unset [159493.009677] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [159493.009679] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [159493.009681] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [159493.009683] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [159493.009685] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [159493.009686] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [159493.009688] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [159493.009690] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [159493.009692] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [159493.031656] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.031773] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.031857] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.032027] pci_bus 0000:02: Allocating resources [159493.032049] pci_bus 0000:03: Allocating resources [159493.032067] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.032228] pci_bus 0000:01: Allocating resources [159493.032236] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.032301] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.032316] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.032424] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159493.262731] PM: Syncing filesystems ... done. [159493.576898] PM: Preparing system for sleep (mem) [159493.941239] Freezing user space processes ... (elapsed 0.002 seconds) done. [159493.943539] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [159493.944767] PM: Suspending system (mem) [159493.944782] Suspending console(s) (use no_console_suspend to debug) [159493.945517] sd 0:0:0:0: [sda] Synchronizing SCSI cache [159493.945650] sd 0:0:0:0: [sda] Stopping disk [159494.574821] PM: suspend of devices complete after 630.249 msecs [159494.590804] PM: late suspend of devices complete after 15.985 msecs [159494.592839] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [159494.593321] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [159494.593368] r8169 0000:02:00.0: System wakeup enabled by ACPI [159494.593371] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [159494.606954] PM: noirq suspend of devices complete after 16.156 msecs [159494.607164] ACPI: Preparing to enter system sleep state S3 [159494.634694] ACPI : EC: EC stopped [159494.634695] PM: Saving platform NVS memory [159494.634735] Disabling non-boot CPUs ... [159494.636027] smpboot: CPU 1 is now offline [159494.656408] smpboot: CPU 2 is now offline [159494.676347] smpboot: CPU 3 is now offline [159494.696270] smpboot: CPU 4 is now offline [159494.715217] Broke affinity for irq 23 [159494.716225] smpboot: CPU 5 is now offline [159494.735217] Broke affinity for irq 23 [159494.736237] smpboot: CPU 6 is now offline [159494.755255] Broke affinity for irq 16 [159494.755262] Broke affinity for irq 23 [159494.755266] Broke affinity for irq 26 [159494.756283] smpboot: CPU 7 is now offline [159494.772265] ACPI: Low-level resume complete [159494.772310] ACPI : EC: EC started [159494.772311] PM: Restoring platform NVS memory [159494.773279] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [159494.773393] Enabling non-boot CPUs ... [159494.773442] x86: Booting SMP configuration: [159494.773443] smpboot: Booting Node 0 Processor 1 APIC 0x2 [159494.774839] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [159494.785178] cache: parent cpu1 should not be sleeping [159494.785324] CPU1 is up [159494.785348] smpboot: Booting Node 0 Processor 2 APIC 0x4 [159494.786745] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [159494.797203] cache: parent cpu2 should not be sleeping [159494.797348] CPU2 is up [159494.797373] smpboot: Booting Node 0 Processor 3 APIC 0x6 [159494.798770] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [159494.813245] cache: parent cpu3 should not be sleeping [159494.813388] CPU3 is up [159494.813411] smpboot: Booting Node 0 Processor 4 APIC 0x1 [159494.829166] cache: parent cpu4 should not be sleeping [159494.829273] CPU4 is up [159494.829292] smpboot: Booting Node 0 Processor 5 APIC 0x3 [159494.841185] cache: parent cpu5 should not be sleeping [159494.841286] CPU5 is up [159494.841304] smpboot: Booting Node 0 Processor 6 APIC 0x5 [159494.853212] cache: parent cpu6 should not be sleeping [159494.853313] CPU6 is up [159494.853331] smpboot: Booting Node 0 Processor 7 APIC 0x7 [159494.865284] cache: parent cpu7 should not be sleeping [159494.865386] CPU7 is up [159494.872548] ACPI: Waking up from system sleep state S3 [159495.185011] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [159495.185041] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [159495.185277] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [159495.185333] PM: noirq resume of devices complete after 16.316 msecs [159495.185725] PM: early resume of devices complete after 0.376 msecs [159495.185815] usb usb1: root hub lost power or was reset [159495.185817] usb usb2: root hub lost power or was reset [159495.185819] usb usb3: root hub lost power or was reset [159495.185850] usb usb4: root hub lost power or was reset [159495.185923] ath: phy0: ASPM enabled: 0x43 [159495.185934] r8169 0000:02:00.0: System wakeup disabled by ACPI [159495.189086] mei_me 0000:00:16.0: FW not ready: resetting. [159495.189100] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [159495.189726] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [159495.189753] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [159495.189970] sd 0:0:0:0: [sda] Starting disk [159495.295012] r8169 0000:02:00.0 enp2s0: link down [159495.328802] rtc_cmos 00:02: System wakeup disabled by ACPI [159495.504665] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [159495.516563] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [159495.516567] usb 3-1: reset high-speed USB device number 2 using ehci-pci [159495.518188] ata3.00: configured for UDMA/100 [159495.520560] usb 4-1: reset high-speed USB device number 2 using ehci-pci [159496.120237] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [159496.409875] PM: resume of devices complete after 1224.811 msecs [159496.410050] PM: Finishing wakeup. [159496.410051] Restarting tasks ... done. [159496.484006] usb 4-1.5: new high-speed USB device number 40 using ehci-pci [159496.488106] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.488190] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.488246] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.488352] pci_bus 0000:02: Allocating resources [159496.488370] pci_bus 0000:03: Allocating resources [159496.488383] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.488479] pci_bus 0000:01: Allocating resources [159496.488484] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.488522] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.488531] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.488595] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [159496.622279] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [159496.729965] r8169 0000:02:00.0 enp2s0: link down [159496.730019] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [159496.730716] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [159496.749310] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [159496.820296] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [159496.834027] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [159496.834031] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [159496.834032] usb 4-1.5: Product: USB2.0-CRW [159496.834034] usb 4-1.5: Manufacturer: Generic [159496.834035] usb 4-1.5: SerialNumber: 20090516388200000 [159496.839960] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [159496.860461] scsi host43: usb-storage 4-1.5:1.0 [159497.041587] usb 4-1.5: USB disconnect, device number 40 [159497.187625] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [159497.188817] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [159497.188820] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [159497.188822] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [159497.191253] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [159497.191256] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [159497.191257] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [159497.192120] ata1.00: configured for UDMA/133 [159498.779474] wlp3s0: authenticate with 34:31:c4:6a:31:fb [159498.801406] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [159498.806831] wlp3s0: authenticated [159498.810748] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [159498.824218] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=3) [159498.824331] wlp3s0: associated [159498.824341] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [159498.827092] ath: EEPROM regdomain: 0x8114 [159498.827095] ath: EEPROM indicates we should expect a country code [159498.827096] ath: doing EEPROM country->regdmn map search [159498.827098] ath: country maps to regdmn code: 0x37 [159498.827099] ath: Country alpha2 being used: DE [159498.827100] ath: Regpair used: 0x37 [159498.827102] ath: regdomain 0x8114 dynamically updated by country IE [159498.827124] cfg80211: Regulatory domain changed to country: DE [159498.827125] cfg80211: DFS Master region: ETSI [159498.827126] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [159498.827129] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [159498.827131] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [159498.827134] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [159498.827136] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [159498.827138] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [165690.479926] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [165690.491409] cfg80211: World regulatory domain updated: [165690.491415] cfg80211: DFS Master region: unset [165690.491417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [165690.491419] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [165690.491420] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [165690.491421] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [165690.491423] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [165690.491425] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [165690.491426] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [165690.491427] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [165690.491428] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [165690.534209] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.534295] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.534353] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.534465] pci_bus 0000:02: Allocating resources [165690.534484] pci_bus 0000:03: Allocating resources [165690.534496] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.534594] pci_bus 0000:01: Allocating resources [165690.534599] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.534639] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.534649] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.534712] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [165690.767687] PM: Syncing filesystems ... done. [165691.664973] PM: Preparing system for sleep (mem) [165691.928041] Freezing user space processes ... (elapsed 0.002 seconds) done. [165691.930339] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [165691.931561] PM: Suspending system (mem) [165691.931577] Suspending console(s) (use no_console_suspend to debug) [165691.931829] sd 0:0:0:0: [sda] Synchronizing SCSI cache [165691.931956] sd 0:0:0:0: [sda] Stopping disk [165692.573041] PM: suspend of devices complete after 641.670 msecs [165692.589082] PM: late suspend of devices complete after 16.035 msecs [165692.591054] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [165692.591563] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [165692.591605] r8169 0000:02:00.0: System wakeup enabled by ACPI [165692.591613] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [165692.605209] PM: noirq suspend of devices complete after 16.132 msecs [165692.605419] ACPI: Preparing to enter system sleep state S3 [165692.632949] ACPI : EC: EC stopped [165692.632950] PM: Saving platform NVS memory [165692.632990] Disabling non-boot CPUs ... [165692.634292] smpboot: CPU 1 is now offline [165692.654684] smpboot: CPU 2 is now offline [165692.674551] smpboot: CPU 3 is now offline [165692.694538] smpboot: CPU 4 is now offline [165692.713480] Broke affinity for irq 23 [165692.714487] smpboot: CPU 5 is now offline [165692.733482] Broke affinity for irq 23 [165692.734497] smpboot: CPU 6 is now offline [165692.753436] Broke affinity for irq 16 [165692.753444] Broke affinity for irq 23 [165692.753447] Broke affinity for irq 26 [165692.754463] smpboot: CPU 7 is now offline [165692.770530] ACPI: Low-level resume complete [165692.770575] ACPI : EC: EC started [165692.770576] PM: Restoring platform NVS memory [165692.771513] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [165692.771647] Enabling non-boot CPUs ... [165692.771696] x86: Booting SMP configuration: [165692.771697] smpboot: Booting Node 0 Processor 1 APIC 0x2 [165692.773094] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [165692.787401] cache: parent cpu1 should not be sleeping [165692.787549] CPU1 is up [165692.787575] smpboot: Booting Node 0 Processor 2 APIC 0x4 [165692.788970] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [165692.799430] cache: parent cpu2 should not be sleeping [165692.799574] CPU2 is up [165692.799598] smpboot: Booting Node 0 Processor 3 APIC 0x6 [165692.800996] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [165692.815468] cache: parent cpu3 should not be sleeping [165692.815614] CPU3 is up [165692.815637] smpboot: Booting Node 0 Processor 4 APIC 0x1 [165692.827392] cache: parent cpu4 should not be sleeping [165692.827497] CPU4 is up [165692.827516] smpboot: Booting Node 0 Processor 5 APIC 0x3 [165692.839409] cache: parent cpu5 should not be sleeping [165692.839510] CPU5 is up [165692.839528] smpboot: Booting Node 0 Processor 6 APIC 0x5 [165692.851437] cache: parent cpu6 should not be sleeping [165692.851539] CPU6 is up [165692.851557] smpboot: Booting Node 0 Processor 7 APIC 0x7 [165692.863510] cache: parent cpu7 should not be sleeping [165692.863613] CPU7 is up [165692.870797] ACPI: Waking up from system sleep state S3 [165693.183267] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [165693.183542] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [165693.183554] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [165693.183592] PM: noirq resume of devices complete after 16.394 msecs [165693.183980] PM: early resume of devices complete after 0.373 msecs [165693.184072] usb usb1: root hub lost power or was reset [165693.184074] usb usb2: root hub lost power or was reset [165693.184082] usb usb3: root hub lost power or was reset [165693.184090] usb usb4: root hub lost power or was reset [165693.184167] ath: phy0: ASPM enabled: 0x43 [165693.184225] r8169 0000:02:00.0: System wakeup disabled by ACPI [165693.187990] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [165693.187991] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [165693.188170] sd 0:0:0:0: [sda] Starting disk [165693.189881] mei_me 0000:00:16.0: FW not ready: resetting. [165693.189890] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [165693.293226] r8169 0000:02:00.0 enp2s0: link down [165693.327045] rtc_cmos 00:02: System wakeup disabled by ACPI [165693.502900] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [165693.514791] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [165693.516416] ata3.00: configured for UDMA/100 [165693.518796] usb 4-1: reset high-speed USB device number 2 using ehci-pci [165693.518847] usb 3-1: reset high-speed USB device number 2 using ehci-pci [165694.118476] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [165694.407852] PM: resume of devices complete after 1224.518 msecs [165694.408065] PM: Finishing wakeup. [165694.408066] Restarting tasks ... done. [165694.490247] usb 4-1.5: new high-speed USB device number 41 using ehci-pci [165694.624260] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [165694.748225] r8169 0000:02:00.0 enp2s0: link down [165694.748310] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [165694.748970] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [165694.767575] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [165694.830384] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [165694.841708] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [165694.841712] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [165694.841715] usb 4-1.5: Product: USB2.0-CRW [165694.841730] usb 4-1.5: Manufacturer: Generic [165694.841734] usb 4-1.5: SerialNumber: 20090516388200000 [165694.848611] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [165694.867892] scsi host44: usb-storage 4-1.5:1.0 [165695.040814] usb 4-1.5: USB disconnect, device number 41 [165695.185890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [165695.186856] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [165695.186859] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [165695.186862] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [165695.188788] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [165695.188790] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [165695.188792] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [165695.189680] ata1.00: configured for UDMA/133 [165696.785737] wlp3s0: authenticate with 34:31:c4:6a:31:fb [165696.807383] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [165696.809892] wlp3s0: authenticated [165696.812999] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [165696.827259] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [165696.827366] wlp3s0: associated [165696.827377] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [165696.829994] ath: EEPROM regdomain: 0x8114 [165696.829996] ath: EEPROM indicates we should expect a country code [165696.829997] ath: doing EEPROM country->regdmn map search [165696.829998] ath: country maps to regdmn code: 0x37 [165696.829999] ath: Country alpha2 being used: DE [165696.829999] ath: Regpair used: 0x37 [165696.830001] ath: regdomain 0x8114 dynamically updated by country IE [165696.830021] cfg80211: Regulatory domain changed to country: DE [165696.830021] cfg80211: DFS Master region: ETSI [165696.830022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [165696.830024] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [165696.830025] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [165696.830027] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [165696.830028] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [165696.830029] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [173162.080762] perf interrupt took too long (5329 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [178772.790838] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [178772.802944] cfg80211: World regulatory domain updated: [178772.802947] cfg80211: DFS Master region: unset [178772.802949] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [178772.802951] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [178772.802952] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [178772.802953] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [178772.802954] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [178772.802956] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [178772.802957] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [178772.802958] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [178772.802959] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [178772.825116] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178772.825196] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178772.825252] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178772.825363] pci_bus 0000:02: Allocating resources [178772.825382] pci_bus 0000:03: Allocating resources [178772.825395] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178772.825494] pci_bus 0000:01: Allocating resources [178772.825514] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178772.825552] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178772.825563] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178772.825629] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [178773.769234] PM: Syncing filesystems ... done. [178774.027601] PM: Preparing system for sleep (mem) [178774.323572] Freezing user space processes ... (elapsed 0.002 seconds) done. [178774.325866] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [178774.327103] PM: Suspending system (mem) [178774.327118] Suspending console(s) (use no_console_suspend to debug) [178774.327376] sd 0:0:0:0: [sda] Synchronizing SCSI cache [178774.327506] sd 0:0:0:0: [sda] Stopping disk [178774.960057] PM: suspend of devices complete after 633.146 msecs [178774.976031] PM: late suspend of devices complete after 15.968 msecs [178774.977898] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [178774.978425] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [178774.978473] r8169 0000:02:00.0: System wakeup enabled by ACPI [178774.978491] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [178774.992151] PM: noirq suspend of devices complete after 16.126 msecs [178774.992360] ACPI: Preparing to enter system sleep state S3 [178775.019895] ACPI : EC: EC stopped [178775.019896] PM: Saving platform NVS memory [178775.019936] Disabling non-boot CPUs ... [178775.021238] smpboot: CPU 1 is now offline [178775.041613] smpboot: CPU 2 is now offline [178775.057654] smpboot: CPU 3 is now offline [178775.073628] smpboot: CPU 4 is now offline [178775.093492] smpboot: CPU 5 is now offline [178775.112398] Broke affinity for irq 23 [178775.113407] smpboot: CPU 6 is now offline [178775.132388] Broke affinity for irq 16 [178775.132396] Broke affinity for irq 23 [178775.132398] Broke affinity for irq 26 [178775.133413] smpboot: CPU 7 is now offline [178775.153471] ACPI: Low-level resume complete [178775.153515] ACPI : EC: EC started [178775.153516] PM: Restoring platform NVS memory [178775.154461] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [178775.154594] Enabling non-boot CPUs ... [178775.154643] x86: Booting SMP configuration: [178775.154644] smpboot: Booting Node 0 Processor 1 APIC 0x2 [178775.156041] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [178775.166357] cache: parent cpu1 should not be sleeping [178775.166506] CPU1 is up [178775.166531] smpboot: Booting Node 0 Processor 2 APIC 0x4 [178775.167926] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [178775.178387] cache: parent cpu2 should not be sleeping [178775.178530] CPU2 is up [178775.178554] smpboot: Booting Node 0 Processor 3 APIC 0x6 [178775.179953] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [178775.194435] cache: parent cpu3 should not be sleeping [178775.194579] CPU3 is up [178775.194603] smpboot: Booting Node 0 Processor 4 APIC 0x1 [178775.206355] cache: parent cpu4 should not be sleeping [178775.206459] CPU4 is up [178775.206478] smpboot: Booting Node 0 Processor 5 APIC 0x3 [178775.218372] cache: parent cpu5 should not be sleeping [178775.218474] CPU5 is up [178775.218491] smpboot: Booting Node 0 Processor 6 APIC 0x5 [178775.230401] cache: parent cpu6 should not be sleeping [178775.230501] CPU6 is up [178775.230519] smpboot: Booting Node 0 Processor 7 APIC 0x7 [178775.242475] cache: parent cpu7 should not be sleeping [178775.242578] CPU7 is up [178775.249738] ACPI: Waking up from system sleep state S3 [178775.562171] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [178775.562448] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [178775.562463] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [178775.562507] PM: noirq resume of devices complete after 16.301 msecs [178775.562900] PM: early resume of devices complete after 0.378 msecs [178775.562992] usb usb1: root hub lost power or was reset [178775.562993] usb usb2: root hub lost power or was reset [178775.562995] usb usb3: root hub lost power or was reset [178775.563029] usb usb4: root hub lost power or was reset [178775.563105] r8169 0000:02:00.0: System wakeup disabled by ACPI [178775.564263] ath: phy0: ASPM enabled: 0x43 [178775.566903] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [178775.566927] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [178775.567211] sd 0:0:0:0: [sda] Starting disk [178775.573663] mei_me 0000:00:16.0: FW not ready: resetting. [178775.573679] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [178775.672173] r8169 0000:02:00.0 enp2s0: link down [178775.706008] rtc_cmos 00:02: System wakeup disabled by ACPI [178775.881889] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [178775.893753] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [178775.895372] ata3.00: configured for UDMA/100 [178775.897758] usb 3-1: reset high-speed USB device number 2 using ehci-pci [178775.897822] usb 4-1: reset high-speed USB device number 2 using ehci-pci [178776.497437] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [178776.787012] PM: resume of devices complete after 1224.758 msecs [178776.787219] PM: Finishing wakeup. [178776.787220] Restarting tasks ... done. [178776.865209] usb 4-1.5: new high-speed USB device number 42 using ehci-pci [178776.995251] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [178777.119256] r8169 0000:02:00.0 enp2s0: link down [178777.119329] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [178777.120038] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [178777.138791] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [178777.209617] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [178777.215912] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [178777.215914] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [178777.215916] usb 4-1.5: Product: USB2.0-CRW [178777.215917] usb 4-1.5: Manufacturer: Generic [178777.215918] usb 4-1.5: SerialNumber: 20090516388200000 [178777.221721] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [178777.249215] scsi host45: usb-storage 4-1.5:1.0 [178777.422853] usb 4-1.5: USB disconnect, device number 42 [178777.564843] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [178777.565828] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [178777.565832] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [178777.565834] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [178777.567788] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [178777.567791] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [178777.567794] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [178777.568661] ata1.00: configured for UDMA/133 [178779.160609] wlp3s0: authenticate with 34:31:c4:6a:31:fb [178779.182483] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [178779.184996] wlp3s0: authenticated [178779.187998] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [178779.194988] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=1) [178779.195094] wlp3s0: associated [178779.195107] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [178779.197654] ath: EEPROM regdomain: 0x8114 [178779.197657] ath: EEPROM indicates we should expect a country code [178779.197658] ath: doing EEPROM country->regdmn map search [178779.197658] ath: country maps to regdmn code: 0x37 [178779.197659] ath: Country alpha2 being used: DE [178779.197660] ath: Regpair used: 0x37 [178779.197661] ath: regdomain 0x8114 dynamically updated by country IE [178779.197681] cfg80211: Regulatory domain changed to country: DE [178779.197682] cfg80211: DFS Master region: ETSI [178779.197683] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [178779.197684] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [178779.197686] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [178779.197687] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [178779.197688] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [178779.197690] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [184447.357746] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [184447.369293] cfg80211: World regulatory domain updated: [184447.369297] cfg80211: DFS Master region: unset [184447.369298] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [184447.369299] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [184447.369301] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [184447.369302] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [184447.369303] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [184447.369305] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [184447.369306] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [184447.369307] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [184447.369308] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [184447.394100] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184447.394200] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184447.394268] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184447.394446] pci_bus 0000:02: Allocating resources [184447.394474] pci_bus 0000:03: Allocating resources [184447.394487] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184447.394585] pci_bus 0000:01: Allocating resources [184447.394606] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184447.394645] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184447.394656] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184447.394721] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184448.323351] PM: Syncing filesystems ... done. [184448.627795] PM: Preparing system for sleep (mem) [184448.893102] Freezing user space processes ... (elapsed 0.002 seconds) done. [184448.895387] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [184448.896617] PM: Suspending system (mem) [184448.896632] Suspending console(s) (use no_console_suspend to debug) [184448.896850] sd 0:0:0:0: [sda] Synchronizing SCSI cache [184448.896983] sd 0:0:0:0: [sda] Stopping disk [184449.533012] PM: suspend of devices complete after 636.576 msecs [184449.548946] PM: late suspend of devices complete after 15.939 msecs [184449.551089] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [184449.551091] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [184449.551842] r8169 0000:02:00.0: System wakeup enabled by ACPI [184449.551843] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [184449.565121] PM: noirq suspend of devices complete after 16.181 msecs [184449.565333] ACPI: Preparing to enter system sleep state S3 [184449.592851] ACPI : EC: EC stopped [184449.592852] PM: Saving platform NVS memory [184449.592892] Disabling non-boot CPUs ... [184449.594366] smpboot: CPU 1 is now offline [184449.610704] smpboot: CPU 2 is now offline [184449.630651] smpboot: CPU 3 is now offline [184449.650421] smpboot: CPU 4 is now offline [184449.670389] smpboot: CPU 5 is now offline [184449.689411] Broke affinity for irq 23 [184449.690426] smpboot: CPU 6 is now offline [184449.709339] Broke affinity for irq 16 [184449.709346] Broke affinity for irq 23 [184449.709349] Broke affinity for irq 26 [184449.710366] smpboot: CPU 7 is now offline [184449.726426] ACPI: Low-level resume complete [184449.726470] ACPI : EC: EC started [184449.726471] PM: Restoring platform NVS memory [184449.727430] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [184449.727559] Enabling non-boot CPUs ... [184449.727608] x86: Booting SMP configuration: [184449.727609] smpboot: Booting Node 0 Processor 1 APIC 0x2 [184449.729005] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [184449.743322] cache: parent cpu1 should not be sleeping [184449.743470] CPU1 is up [184449.743495] smpboot: Booting Node 0 Processor 2 APIC 0x4 [184449.744891] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [184449.755356] cache: parent cpu2 should not be sleeping [184449.755498] CPU2 is up [184449.755522] smpboot: Booting Node 0 Processor 3 APIC 0x6 [184449.756920] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [184449.771400] cache: parent cpu3 should not be sleeping [184449.771543] CPU3 is up [184449.771567] smpboot: Booting Node 0 Processor 4 APIC 0x1 [184449.783324] cache: parent cpu4 should not be sleeping [184449.783429] CPU4 is up [184449.783448] smpboot: Booting Node 0 Processor 5 APIC 0x3 [184449.795337] cache: parent cpu5 should not be sleeping [184449.795437] CPU5 is up [184449.795456] smpboot: Booting Node 0 Processor 6 APIC 0x5 [184449.807362] cache: parent cpu6 should not be sleeping [184449.807461] CPU6 is up [184449.807478] smpboot: Booting Node 0 Processor 7 APIC 0x7 [184449.819439] cache: parent cpu7 should not be sleeping [184449.819541] CPU7 is up [184449.826709] ACPI: Waking up from system sleep state S3 [184450.139235] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [184450.139254] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [184450.139313] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [184450.139496] PM: noirq resume of devices complete after 16.323 msecs [184450.139867] PM: early resume of devices complete after 0.356 msecs [184450.139944] usb usb3: root hub lost power or was reset [184450.139970] usb usb1: root hub lost power or was reset [184450.139971] usb usb2: root hub lost power or was reset [184450.140020] usb usb4: root hub lost power or was reset [184450.141490] r8169 0000:02:00.0: System wakeup disabled by ACPI [184450.142163] ath: phy0: ASPM enabled: 0x43 [184450.143844] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [184450.143908] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [184450.144157] sd 0:0:0:0: [sda] Starting disk [184450.147462] mei_me 0000:00:16.0: FW not ready: resetting. [184450.147475] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [184450.257167] r8169 0000:02:00.0 enp2s0: link down [184450.286964] rtc_cmos 00:02: System wakeup disabled by ACPI [184450.458764] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [184450.470721] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [184450.472348] ata3.00: configured for UDMA/100 [184450.474728] usb 3-1: reset high-speed USB device number 2 using ehci-pci [184450.474755] usb 4-1: reset high-speed USB device number 2 using ehci-pci [184451.074406] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [184451.363954] PM: resume of devices complete after 1224.732 msecs [184451.364146] PM: Finishing wakeup. [184451.364147] Restarting tasks ... done. [184451.438282] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.438363] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.438430] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.438565] pci_bus 0000:02: Allocating resources [184451.438584] pci_bus 0000:03: Allocating resources [184451.438597] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.438692] pci_bus 0000:01: Allocating resources [184451.438698] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.438736] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.438746] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.438811] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [184451.442191] usb 4-1.5: new high-speed USB device number 43 using ehci-pci [184451.547329] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [184451.547332] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [184451.547334] usb 4-1.5: Product: USB2.0-CRW [184451.547335] usb 4-1.5: Manufacturer: Generic [184451.547336] usb 4-1.5: SerialNumber: 20090516388200000 [184451.553119] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [184451.556237] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [184451.571925] scsi host46: usb-storage 4-1.5:1.0 [184451.672196] r8169 0000:02:00.0 enp2s0: link down [184451.672263] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [184451.672932] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [184451.691584] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [184451.745733] usb 4-1.5: USB disconnect, device number 43 [184451.753899] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [184452.141812] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [184452.142794] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [184452.142799] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [184452.142801] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [184452.144671] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [184452.144675] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [184452.144677] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [184452.145558] ata1.00: configured for UDMA/133 [184453.761505] wlp3s0: authenticate with 34:31:c4:6a:31:fb [184453.783449] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [184453.786014] wlp3s0: authenticated [184453.788969] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [184453.802046] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=3) [184453.802149] wlp3s0: associated [184453.802161] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [184453.804545] ath: EEPROM regdomain: 0x8114 [184453.804547] ath: EEPROM indicates we should expect a country code [184453.804548] ath: doing EEPROM country->regdmn map search [184453.804549] ath: country maps to regdmn code: 0x37 [184453.804550] ath: Country alpha2 being used: DE [184453.804551] ath: Regpair used: 0x37 [184453.804552] ath: regdomain 0x8114 dynamically updated by country IE [184453.804572] cfg80211: Regulatory domain changed to country: DE [184453.804573] cfg80211: DFS Master region: ETSI [184453.804574] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [184453.804575] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [184453.804577] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [184453.804578] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [184453.804579] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [184453.804580] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [186698.977085] nvidia-modeset: Allocated GPU:0 (GPU-81e22f38-ae73-b0bb-e5cf-f6cc8a1a2c6e) @ PCI:0000:01:00.0 [186698.977456] nvidia-modeset: Freed GPU:0 (GPU-81e22f38-ae73-b0bb-e5cf-f6cc8a1a2c6e) @ PCI:0000:01:00.0 [199702.878028] wlp3s0: deauthenticating from 34:31:c4:6a:31:fb by local choice (Reason: 3=DEAUTH_LEAVING) [199702.914390] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199702.914475] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199702.914533] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199702.914647] pci_bus 0000:02: Allocating resources [199702.914667] pci_bus 0000:03: Allocating resources [199702.914680] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199702.914780] pci_bus 0000:01: Allocating resources [199702.914788] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199702.914847] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199702.914858] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199702.914927] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [199703.029912] cfg80211: World regulatory domain updated: [199703.029914] cfg80211: DFS Master region: unset [199703.029915] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [199703.029917] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [199703.029919] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [199703.029920] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [199703.029921] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [199703.029923] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [199703.029924] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [199703.029925] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [199703.029926] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [199703.204105] PM: Syncing filesystems ... done. [199703.586589] PM: Preparing system for sleep (mem) [199703.795362] Freezing user space processes ... (elapsed 0.002 seconds) done. [199703.797686] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [199703.798976] PM: Suspending system (mem) [199703.798994] Suspending console(s) (use no_console_suspend to debug) [199703.799349] sd 0:0:0:0: [sda] Synchronizing SCSI cache [199703.799477] sd 0:0:0:0: [sda] Stopping disk [199704.421626] PM: suspend of devices complete after 622.808 msecs [199704.437560] PM: late suspend of devices complete after 15.937 msecs [199704.439008] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [199704.439789] r8169 0000:02:00.0: System wakeup enabled by ACPI [199704.439797] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [199704.439803] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [199704.453765] PM: noirq suspend of devices complete after 16.211 msecs [199704.453976] ACPI: Preparing to enter system sleep state S3 [199704.481503] ACPI : EC: EC stopped [199704.481504] PM: Saving platform NVS memory [199704.481544] Disabling non-boot CPUs ... [199704.482847] smpboot: CPU 1 is now offline [199704.503186] smpboot: CPU 2 is now offline [199704.519320] smpboot: CPU 3 is now offline [199704.535099] smpboot: CPU 4 is now offline [199704.555064] smpboot: CPU 5 is now offline [199704.574041] Broke affinity for irq 23 [199704.575064] smpboot: CPU 6 is now offline [199704.590062] Broke affinity for irq 16 [199704.590070] Broke affinity for irq 23 [199704.590073] Broke affinity for irq 26 [199704.591085] smpboot: CPU 7 is now offline [199704.607079] ACPI: Low-level resume complete [199704.607125] ACPI : EC: EC started [199704.607125] PM: Restoring platform NVS memory [199704.608068] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [199704.608201] Enabling non-boot CPUs ... [199704.608250] x86: Booting SMP configuration: [199704.608251] smpboot: Booting Node 0 Processor 1 APIC 0x2 [199704.609649] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29 [199704.623975] cache: parent cpu1 should not be sleeping [199704.624123] CPU1 is up [199704.624148] smpboot: Booting Node 0 Processor 2 APIC 0x4 [199704.625544] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [199704.636008] cache: parent cpu2 should not be sleeping [199704.636152] CPU2 is up [199704.636176] smpboot: Booting Node 0 Processor 3 APIC 0x6 [199704.637575] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29 [199704.652050] cache: parent cpu3 should not be sleeping [199704.652203] CPU3 is up [199704.652227] smpboot: Booting Node 0 Processor 4 APIC 0x1 [199704.663976] cache: parent cpu4 should not be sleeping [199704.664080] CPU4 is up [199704.664098] smpboot: Booting Node 0 Processor 5 APIC 0x3 [199704.675992] cache: parent cpu5 should not be sleeping [199704.676095] CPU5 is up [199704.676115] smpboot: Booting Node 0 Processor 6 APIC 0x5 [199704.688015] cache: parent cpu6 should not be sleeping [199704.688117] CPU6 is up [199704.688136] smpboot: Booting Node 0 Processor 7 APIC 0x7 [199704.700098] cache: parent cpu7 should not be sleeping [199704.700200] CPU7 is up [199704.707367] ACPI: Waking up from system sleep state S3 [199705.019849] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [199705.020020] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [199705.020088] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [199705.020128] PM: noirq resume of devices complete after 16.359 msecs [199705.020494] PM: early resume of devices complete after 0.352 msecs [199705.020582] usb usb1: root hub lost power or was reset [199705.020583] usb usb2: root hub lost power or was reset [199705.020585] usb usb3: root hub lost power or was reset [199705.021803] usb usb4: root hub lost power or was reset [199705.023597] ath: phy0: ASPM enabled: 0x43 [199705.023653] r8169 0000:02:00.0: System wakeup disabled by ACPI [199705.024463] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [199705.025685] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [199705.026873] mei_me 0000:00:16.0: FW not ready: resetting. [199705.026880] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000045 60000106 [199705.027524] sd 0:0:0:0: [sda] Starting disk [199705.149747] r8169 0000:02:00.0 enp2s0: link down [199705.163614] rtc_cmos 00:02: System wakeup disabled by ACPI [199705.343370] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [199705.343417] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [199705.344987] ata3.00: configured for UDMA/100 [199705.355366] usb 4-1: reset high-speed USB device number 2 using ehci-pci [199705.355418] usb 3-1: reset high-speed USB device number 2 using ehci-pci [199705.955046] usb 4-1.6: reset low-speed USB device number 36 using ehci-pci [199706.244056] PM: resume of devices complete after 1224.206 msecs [199706.244234] PM: Finishing wakeup. [199706.244234] Restarting tasks ... done. [199706.318822] usb 4-1.5: new high-speed USB device number 44 using ehci-pci [199706.452878] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [199706.564904] r8169 0000:02:00.0 enp2s0: link down [199706.564967] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [199706.565670] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [199706.584354] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [199706.659675] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [199706.669304] usb 4-1.5: New USB device found, idVendor=0bda, idProduct=0138 [199706.669307] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [199706.669309] usb 4-1.5: Product: USB2.0-CRW [199706.669310] usb 4-1.5: Manufacturer: Generic [199706.669311] usb 4-1.5: SerialNumber: 20090516388200000 [199706.674925] ums-realtek 4-1.5:1.0: USB Mass Storage device detected [199706.693881] scsi host47: usb-storage 4-1.5:1.0 [199706.885286] usb 4-1.5: USB disconnect, device number 44 [199707.030465] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [199707.031416] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [199707.031419] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [199707.031421] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [199707.033265] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [199707.033267] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [199707.033269] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [199707.034137] ata1.00: configured for UDMA/133 [199708.615171] wlp3s0: authenticate with 34:31:c4:6a:31:fb [199708.636098] wlp3s0: send auth to 34:31:c4:6a:31:fb (try 1/3) [199708.638616] wlp3s0: authenticated [199708.641590] wlp3s0: associate with 34:31:c4:6a:31:fb (try 1/3) [199708.649393] wlp3s0: RX AssocResp from 34:31:c4:6a:31:fb (capab=0x431 status=0 aid=3) [199708.649501] wlp3s0: associated [199708.649514] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [199708.652417] ath: EEPROM regdomain: 0x8114 [199708.652419] ath: EEPROM indicates we should expect a country code [199708.652420] ath: doing EEPROM country->regdmn map search [199708.652421] ath: country maps to regdmn code: 0x37 [199708.652422] ath: Country alpha2 being used: DE [199708.652423] ath: Regpair used: 0x37 [199708.652424] ath: regdomain 0x8114 dynamically updated by country IE [199708.652444] cfg80211: Regulatory domain changed to country: DE [199708.652445] cfg80211: DFS Master region: ETSI [199708.652446] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [199708.652448] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [199708.652449] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [199708.652451] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [199708.652452] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [199708.652453] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)