[main.c] check_logging:checking if console messages should be redirected and logged [main.c] check_logging:logging will be enabled! [main.c] initialize_environment:source built on Aug 1 2013 [main.c] initialize_environment:checking if '/dev/tty7' exists [main.c] check_for_consoles:checking for consoles [main.c] add_consoles_from_file:opening /sys/class/tty/console/active [main.c] add_consoles_from_file:reading file [main.c] add_consoles_from_file:console /dev/tty0 found! [main.c] check_for_consoles:After processing serial consoles there are now 0 text displays [main.c] redirect_standard_io_to_device:redirecting stdio to /dev/tty7 [main.c] initialize_environment:Making sure /run/plymouth exists [main.c] initialize_environment:initialized minimal work environment [main.c] attach_to_running_session:creating new terminal session [ply-terminal-session.c] ply_terminal_session_attach:ptmx not passed in, creating one [ply-terminal-session.c] open_pseudoterminal:opening device '/dev/ptmx' [ply-terminal-session.c] open_pseudoterminal: opened device '/dev/ptmx' [ply-terminal-session.c] open_pseudoterminal:creating pseudoterminal [ply-terminal-session.c] open_pseudoterminal:done creating pseudoterminal [ply-terminal-session.c] open_pseudoterminal:unlocking pseudoterminal [ply-terminal-session.c] open_pseudoterminal:unlocked pseudoterminal [ply-terminal-session.c] ply_terminal_session_attach:redirecting system console to terminal device [ply-terminal-session.c] ply_terminal_session_attach:done redirecting system console to terminal device [ply-terminal-session.c] ply_terminal_session_start_logging:logging incoming console messages [main.c] get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration' [main.c] main:entering event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 240 (plymouth --ping) with parent pid 227 (/bin/sh -e /proc/self/fd/9) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 7 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 7 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 7 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 7 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 7 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 7 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 637 (/bin/plymouth show-splash) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got show splash request [main.c] plymouth_should_ignore_show_splash_calls:checking if plymouth should be running [main.c] check_for_consoles:checking for consoles and adding displays [main.c] add_consoles_from_file:opening /sys/class/tty/console/active [main.c] add_consoles_from_file:reading file [main.c] add_consoles_from_file:console /dev/tty0 found! [main.c] add_default_displays_and_keyboard:adding default displays and keyboard [ply-renderer.c] ply_renderer_open_plugin:trying to open renderer plugin /lib/x86_64-linux-gnu/plymouth/renderers/x11.so [ply-utils.c] ply_open_module:Could not load module "/lib/x86_64-linux-gnu/plymouth/renderers/x11.so": /lib/x86_64-linux-gnu/plymouth/renderers/x11.so: cannot open shared object file: No such file or directory [ply-renderer.c] ply_renderer_open_plugin:trying to open renderer plugin /lib/x86_64-linux-gnu/plymouth/renderers/drm.so [./plugin.c] create_backend:creating renderer backend for device /dev/dri/card0 [./plugin.c] load_driver:Attempting to load driver 'i915' [ply-terminal.c] ply_terminal_open:trying to open terminal '/dev/tty7' [ply-terminal.c] ply_terminal_look_up_geometry:looking up terminal text geometry [ply-terminal.c] ply_terminal_look_up_geometry:terminal is now 240x67 text cells [ply-terminal.c] get_active_vt:Remembering that initial vt is 1 [./plugin.c] find_controller_for_encoder:Found already lit monitor [./plugin.c] get_index_of_active_mode:Looking for connector mode index of active mode 1920x1080 [./plugin.c] find_index_of_mode:Found connector mode index 0 for mode 1920x1080 [./plugin.c] ply_renderer_head_add_connector:Adding connector with id 9 to 1920x1080 head [./plugin.c] ply_renderer_head_new:Creating 1920x1080 renderer head [./ply-renderer-generic-driver.c] ply_renderer_buffer_new:returning 1x1 buffer with stride 64 [ply-renderer.c] ply_renderer_open_plugin:opened renderer plugin /lib/x86_64-linux-gnu/plymouth/renderers/drm.so [main.c] set_keyboard:listening for keystrokes [main.c] set_keyboard:listening for backspace [main.c] set_keyboard:listening for enter [main.c] add_pixel_displays_from_renderer:Adding displays for 1 heads [main.c] check_for_consoles:After processing serial consoles there are now 1 text displays [main.c] plymouth_should_show_default_splash:checking if plymouth should show default splash [main.c] plymouth_should_show_default_splash:using default splash because kernel command line has option "splash" [main.c] show_default_splash:Showing splash screen [main.c] find_system_default_splash:Trying to load /etc/plymouth//plymouthd.conf [ply-key-file.c] ply_key_file_open_file:Failed to open key file /etc/plymouth//plymouthd.conf: No such file or directory [main.c] find_system_default_splash:failed to load /etc/plymouth//plymouthd.conf [main.c] find_distribution_default_splash:Trying to load /lib/plymouth//plymouthd.defaults [ply-key-file.c] ply_key_file_open_file:Failed to open key file /lib/plymouth//plymouthd.defaults: No such file or directory [main.c] find_distribution_default_splash:failed to load /lib/plymouth//plymouthd.defaults [main.c] show_default_splash:Trying old scheme for default splash [main.c] start_boot_splash:Loading boot splash theme '/lib/plymouth/themes/default.plymouth' [ply-key-file.c] ply_key_file_load_group:trying to load group Plymouth Theme [ply-key-file.c] ply_key_file_load_group:trying to load group script [ply-key-file.c] ply_key_file_load_groups:key file has no more groups [main.c] start_boot_splash:attaching plugin to event loop [main.c] start_boot_splash:attaching progress to plugin [main.c] add_displays_and_keyboard_to_boot_splash:setting keyboard on boot splash [main.c] add_displays_and_keyboard_to_boot_splash:adding pixel display on boot splash [main.c] add_displays_and_keyboard_to_boot_splash:adding text display on boot splash [main.c] start_boot_splash:showing plugin [ply-boot-splash.c] ply_boot_splash_show:showing splash screen [./plugin.c] show_splash_screen:starting boot animation [./plugin.c] start_animation:parsing script file [./plugin.c] start_script_animation:executing script file [ply-label.c] ply_label_free:Unloading label control plugin [ply-label.c] ply_label_free:Unloading label control plugin [ply-label.c] ply_label_free:Unloading label control plugin [ply-label.c] ply_label_free:Unloading label control plugin [./plugin.c] ply_renderer_head_map:Creating buffer for 1920x1080 renderer head [./ply-renderer-generic-driver.c] ply_renderer_buffer_new:returning 1920x1080 buffer with stride 7680 [./plugin.c] ply_renderer_head_map:Mapping buffer for 1920x1080 renderer head [./plugin.c] ply_renderer_head_redraw:Redrawing 1920x1080 renderer head [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 9 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 9 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 9 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 9 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 9 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 9 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 9 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 9 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 9 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 9 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 9 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 9 from event loop [./plugin.c] on_active_vt_changed:activating on vt change [./plugin.c] activate:taking master and scanning out [./plugin.c] ply_renderer_head_set_scan_out_buffer:Setting scan out buffer of 1920x1080 head to our buffer [./plugin.c] flush_head:Needed to reset scan out buffer on 1920x1080 renderer head [./plugin.c] ply_renderer_head_set_scan_out_buffer:Setting scan out buffer of 1920x1080 head to our buffer [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 7 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 7 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 7 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 7 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 7 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 7 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 815 (/bin/plymouth update-root-fs --read-write) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got system initialized notification [main.c] on_system_initialized:system now initialized, opening log [main.c] get_log_file_for_mode:returning log file '/var/log/boot.log' [main.c] prepare_logging:opening log '/var/log/boot.log' [ply-utils.c] ply_get_process_command_line:Could not open /proc/858/cmdline: No such file or directory [ply-utils.c] ply_get_process_parent_pid:Could not open /proc/858/stat: No such file or directory [ply-utils.c] ply_get_process_command_line:Could not open /proc/0/cmdline: No such file or directory [ply-boot-server.c] print_connection_process_identity:connection is from pid 858 ((null)) with parent pid 0 ((null)) [ply-boot-server.c] ply_boot_connection_on_request:could not finish writing ack: Broken pipe [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 7 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 7 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 7 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 7 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 7 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 7 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 7 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 935 (plymouth --ping) with parent pid 917 (/bin/sh /etc/rcS.d/S37apparmor start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'upstart-file-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'systemd-logind' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 993 (plymouth --ping) with parent pid 917 (/bin/sh /etc/rcS.d/S37apparmor start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'avahi-daemon' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1003 (plymouth --ping) with parent pid 917 (/bin/sh /etc/rcS.d/S37apparmor start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'avahi-cups-reload' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'avahi-cups-reload' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1018 (plymouth --ping) with parent pid 1009 (/bin/sh /etc/rcS.d/S47lm-sensors start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1035 (plymouth --ping) with parent pid 1009 (/bin/sh /etc/rcS.d/S47lm-sensors start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1041 (plymouth --ping) with parent pid 1009 (/bin/sh /etc/rcS.d/S47lm-sensors start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1059 (plymouth --ping) with parent pid 1052 (/bin/sh /etc/rcS.d/S70x11-common start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1064 (plymouth --ping) with parent pid 1052 (/bin/sh /etc/rcS.d/S70x11-common start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1070 (plymouth --ping) with parent pid 1052 (/bin/sh /etc/rcS.d/S70x11-common start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'rc-sysinit' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1151 (plymouth --ping) with parent pid 1143 (/bin/sh /etc/rc2.d/S20virtualbox start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'network-manager' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1178 (plymouth --ping) with parent pid 1143 (/bin/sh /etc/rc2.d/S20virtualbox start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1187 (plymouth --ping) with parent pid 1143 (/bin/sh /etc/rc2.d/S20virtualbox start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'rc' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'tty4' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'apport' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'tty5' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'cups-browsed' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'tty2' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'tty3' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'tty6' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'anacron' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'acpid' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'plymouth-stop' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'alsa-state' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1221 (plymouth --ping) with parent pid 1212 (/bin/sh /etc/rc2.d/S70dns-clean start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1226 (plymouth --ping) with parent pid 1212 (/bin/sh /etc/rc2.d/S70dns-clean start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'irqbalance' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1232 (plymouth --ping) with parent pid 1212 (/bin/sh /etc/rc2.d/S70dns-clean start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1244 (plymouth --ping) with parent pid 1183 (lightdm) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1246 (plymouth --has-active-vt) with parent pid 1183 (lightdm) [ply-boot-server.c] ply_boot_connection_on_request:got has_active vt? request [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1247 (plymouth deactivate) with parent pid 1183 (lightdm) [ply-boot-server.c] ply_boot_connection_on_request:got deactivate request [main.c] on_deactivate:deactivating [main.c] on_deactivate:deactivating keyboard [ply-event-loop.c] ply_event_loop_stop_watching_fd:stopping watching fd 11 [ply-event-loop.c] ply_event_loop_stop_watching_fd:removing destination for fd 11 [ply-boot-splash.c] ply_boot_splash_become_idle:telling splash to become idle [ply-boot-splash.c] on_idle:splash now idle [main.c] on_boot_splash_idle:boot splash idle [main.c] on_boot_splash_idle:deactivating splash [main.c] deactivate_splash:deactivating renderer [./plugin.c] deactivate:dropping master [main.c] detach_from_running_session:detaching from terminal session [ply-terminal-session.c] ply_terminal_session_detach:stopping terminal logger [ply-terminal-session.c] ply_terminal_session_stop_logging:stopping logging of incoming console messages [ply-event-loop.c] ply_event_loop_stop_watching_fd:stopping watching fd 8 [ply-event-loop.c] ply_event_loop_stop_watching_fd:removing destination for fd 8 [ply-event-loop.c] ply_event_loop_stop_watching_fd:no more destinations remaing for fd 8, removing source [ply-terminal-session.c] ply_terminal_session_detach:unredirecting console messages [ply-terminal-session.c] ply_terminal_session_detach:ptmx wasn't originally passed in, destroying created one [main.c] deactivate_splash:deactivating terminal [ply-boot-server.c] ply_boot_connection_on_deactivated:deactivated [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 12 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 12 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 12 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'cron' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1324 (plymouth --ping) with parent pid 1302 (/bin/sh /etc/rc2.d/S99timidity start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 8 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 8 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 8 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 8 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 8 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 8 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1349 (plymouth --ping) with parent pid 1302 (/bin/sh /etc/rc2.d/S99timidity start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 8 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 8 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 8 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 8 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 8 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 8 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 1355 (plymouth --ping) with parent pid 1302 (/bin/sh /etc/rc2.d/S99timidity start) [ply-event-loop.c] ply_event_loop_disconnect_source:disconnecting source with fd 8 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x405b60 for fd 8 [ply-event-loop.c] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x405b60 for fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done disconnecting source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing watches for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing watches for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:freeing destinations for source with fd 8 [ply-event-loop.c] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x405fb0, 0x405b60) of fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:done freeing destinations for source with fd 8 [ply-event-loop.c] ply_event_loop_disconnect_source:removing source with fd 8 from event loop [ply-event-loop.c] ply_event_loop_remove_source_node:failed to delete fd 8 from epoll watch list: Bad file descriptor [ply-event-loop.c] ply_event_loop_disconnect_source:done removing source with fd 8 from event loop [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'rc' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'tty1' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'cups' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'whoopsie' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'mysql' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'lightdm' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'plymouth-ready' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'mountall-net' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'mountall-net' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 899 (plymouth-upstart-bridge) with parent pid 1 (/sbin/ini) [ply-boot-server.c] ply_boot_connection_on_request:got update request [main.c] on_update:updating status to 'startpar-bridge' [ply-boot-server.c] print_connection_process_identity:connection is from pid 1659 (plymouth quit --retain-splash) with parent pid 1183 (lightdm) [ply-boot-server.c] ply_boot_connection_on_request:got quit --retain-splash request [main.c] get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration' [main.c] on_quit:time to quit, closing log [main.c] on_quit:deactivating keyboard [main.c] on_quit:unloading splash [ply-boot-splash.c] ply_boot_splash_become_idle:telling splash to become idle [ply-boot-splash.c] on_idle:splash now idle [main.c] on_boot_splash_idle:boot splash idle [main.c] on_boot_splash_idle:quitting splash [main.c] quit_splash:quiting splash [main.c] quit_splash:freeing splash [ply-boot-splash.c] ply_boot_splash_free:freeing splash [ply-event-loop.c] ply_event_loop_stop_watching_for_timeout:multiple matching timeouts found for removal [ply-event-loop.c] ply_event_loop_stop_watching_for_timeout:multiple matching timeouts found for removal [ply-boot-splash.c] remove_displays:removing pixel displays [ply-boot-splash.c] remove_displays:Removing 1920x1080 pixel display [ply-boot-splash.c] remove_displays:Removing node [ply-boot-splash.c] remove_displays:removing text displays [ply-boot-splash.c] remove_displays:Removing 240x67 text display [ply-boot-splash.c] remove_displays:Removing node [main.c] quit_splash:removing displays and keyboard [main.c] remove_displays_and_keyboard:removing displays and keyboard [main.c] remove_displays_and_keyboard:removing pixel display [main.c] remove_displays_and_keyboard:removing text display [main.c] remove_displays_and_keyboard:removing keyboard [./plugin.c] ply_renderer_head_unmap:unmapping 1920x1080 renderer head [./plugin.c] close_device:closing device [./plugin.c] ply_renderer_head_free:freeing 1920x1080 renderer head [./plugin.c] unload_driver:unloading driver [ply-renderer.c] ply_renderer_free:Unloading renderer backend plugin [ply-terminal.c] ply_terminal_close:restoring color palette [ply-terminal.c] ply_terminal_close:stop watching tty fd [ply-event-loop.c] ply_event_loop_stop_watching_fd:stopping watching fd 11 [ply-event-loop.c] ply_event_loop_stop_watching_fd:removing destination for fd 11 [ply-event-loop.c] ply_event_loop_stop_watching_fd:no more destinations remaing for fd 11, removing source [ply-terminal.c] ply_terminal_close:stop watching SIGWINCH signal [ply-terminal.c] ply_terminal_close:setting buffered input [main.c] on_boot_splash_idle:quitting program [main.c] quit_program:exiting event loop [ply-boot-server.c] ply_boot_connection_on_quit_complete:quit complete [main.c] main:exited event loop [ply-boot-splash.c] ply_boot_splash_free:freeing splash [main.c] main:freeing terminal session [ply-terminal-session.c] ply_terminal_session_stop_logging:stopping logging of incoming console messages [main.c] main:exiting with code 0