[ 2571.577256] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 81/100
[ 2571.582908] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 82/100
[ 2571.590141] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 83/100
[ 2571.596229] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 84/100
[ 2571.602381] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 85/100
[ 2571.608479] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 86/100
[ 2571.614667] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 87/100
[ 2571.620331] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 88/100
[ 2571.626468] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 89/100
[ 2571.632571] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 90/100
[ 2571.640354] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 91/100
[ 2571.646240] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 92/100
[ 2571.652394] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 93/100
[ 2571.658552] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 94/100
[ 2571.666306] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 95/100
[ 2571.672464] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 96/100
[ 2571.678655] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 97/100
[ 2571.684861] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 98/100
[ 2571.692299] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, try 99/100
[ 2571.698255] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0b:6b:2e:c2:a7, disconnecting.
[ 2571.701358] wlan0: moving STA 00:0b:6b:2e:c2:a7 to state 3
[ 2571.701366] wlan0: moving STA 00:0b:6b:2e:c2:a7 to state 2
[ 2571.701376] wlan0: moving STA 00:0b:6b:2e:c2:a7 to state 1
[ 2571.706564] ieee80211 phy0: Removed STA 00:0b:6b:2e:c2:a7
[ 2571.706750] ieee80211 phy0: Destroyed STA 00:0b:6b:2e:c2:a7
[ 2571.707610] cfg80211: Calling CRDA to update world regulatory domain
[ 2571.707910] ieee80211 phy0: device now idle
[ 2571.721903] cfg80211: World regulatory domain updated:
[ 2571.721912] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2571.721920] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2571.721927] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2571.721933] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2571.721940] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2571.721946] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2571.811007] ieee80211 phy0: device no longer idle - scanning
[ 2575.795370] ieee80211 phy0: device now idle
[ 2580.805055] ieee80211 phy0: device no longer idle - scanning
[ 2584.722152] ieee80211 phy0: device now idle
[ 2587.427924] ieee80211 phy0: device no longer idle - scanning
[ 2591.330158] wlan0: authenticate with 00:0d:67:2a:00:4d
[ 2591.330176] ieee80211 phy0: Allocated STA 00:0d:67:2a:00:4d
[ 2591.343921] ieee80211 phy0: Inserted STA 00:0d:67:2a:00:4d
[ 2591.343930] wlan0: send auth to 00:0d:67:2a:00:4d (try 1/3)
[ 2591.348295] wlan0: authenticated
[ 2591.348301] wlan0: moving STA 00:0d:67:2a:00:4d to state 2
[ 2591.357845] wlan0: associate with 00:0d:67:2a:00:4d (try 1/3)
[ 2591.359180] wlan0: RX AssocResp from 00:0d:67:2a:00:4d (capab=0x401 status=0 aid=2)
[ 2591.359187] wlan0: associated
[ 2591.359214] wlan0: moving STA 00:0d:67:2a:00:4d to state 3
[ 2591.359225] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2591.359235] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2591.359243] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[ 2591.359251] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[ 2591.374517] wlan0: moving STA 00:0d:67:2a:00:4d to state 4
[ 2591.378119] cfg80211: Calling CRDA for country: US
[ 2591.393258] ath: regdomain 0x8348 updated by CountryIE
[ 2591.393264] ath: EEPROM regdomain: 0x8348
[ 2591.393267] ath: EEPROM indicates we should expect a country code
[ 2591.393271] ath: doing EEPROM country->regdmn map search
[ 2591.393274] ath: country maps to regdmn code: 0x3a
[ 2591.393277] ath: Country alpha2 being used: US
[ 2591.393280] ath: Regpair used: 0x3a
[ 2591.393322] cfg80211: Regulatory domain changed to country: US
[ 2591.393325] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2591.393331] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 2591.393336] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 2591.393341] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2591.393346] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2591.393350] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2591.393355] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 2602.036308] wlan0: no IPv6 routers present
[ 2637.260849] wlan0: deauthenticating from 00:0d:67:2a:00:4d by local choice (reason=3)
[ 2637.261642] wlan0: moving STA 00:0d:67:2a:00:4d to state 3
[ 2637.261650] wlan0: moving STA 00:0d:67:2a:00:4d to state 2
[ 2637.261660] wlan0: moving STA 00:0d:67:2a:00:4d to state 1
[ 2637.265412] ieee80211 phy0: Removed STA 00:0d:67:2a:00:4d
[ 2637.265509] ieee80211 phy0: Destroyed STA 00:0d:67:2a:00:4d
[ 2637.274615] ieee80211 phy0: device now idle
[ 2637.274969] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 2637.278546] cfg80211: Calling CRDA to update world regulatory domain
[ 2637.284599] ieee80211 phy0: device no longer idle - scanning
[ 2637.305115] cfg80211: World regulatory domain updated:
[ 2637.305122] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2637.305128] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2637.305134] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2637.305138] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2637.305144] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2637.305148] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2641.256435] ieee80211 phy0: device now idle
[ 2641.260613] wlan0: authenticate with 00:0d:67:25:71:a5
[ 2641.260630] ieee80211 phy0: Allocated STA 00:0d:67:25:71:a5
[ 2641.264496] ieee80211 phy0: device no longer idle - in use
[ 2641.294296] ieee80211 phy0: Inserted STA 00:0d:67:25:71:a5
[ 2641.294305] wlan0: send auth to 00:0d:67:25:71:a5 (try 1/3)
[ 2641.495276] wlan0: send auth to 00:0d:67:25:71:a5 (try 2/3)
[ 2641.497475] wlan0: authenticated
[ 2641.497483] wlan0: moving STA 00:0d:67:25:71:a5 to state 2
[ 2641.512277] wlan0: associate with 00:0d:67:25:71:a5 (try 1/3)
[ 2641.513663] wlan0: RX AssocResp from 00:0d:67:25:71:a5 (capab=0x401 status=0 aid=1)
[ 2641.513671] wlan0: associated
[ 2641.513698] wlan0: moving STA 00:0d:67:25:71:a5 to state 3
[ 2641.513710] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2641.513720] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2641.513727] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[ 2641.513735] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[ 2641.529087] wlan0: moving STA 00:0d:67:25:71:a5 to state 4
[ 2641.534694] cfg80211: Calling CRDA for country: US
[ 2641.572583] ath: regdomain 0x8348 updated by CountryIE
[ 2641.572589] ath: EEPROM regdomain: 0x8348
[ 2641.572592] ath: EEPROM indicates we should expect a country code
[ 2641.572596] ath: doing EEPROM country->regdmn map search
[ 2641.572599] ath: country maps to regdmn code: 0x3a
[ 2641.572602] ath: Country alpha2 being used: US
[ 2641.572605] ath: Regpair used: 0x3a
[ 2641.572645] cfg80211: Regulatory domain changed to country: US
[ 2641.572648] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2641.572654] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 2641.572658] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 2641.572663] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2641.572668] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2641.572672] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2641.572677] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 2651.779048] wlan0: no IPv6 routers present
[ 2687.254265] wlan0: deauthenticating from 00:0d:67:25:71:a5 by local choice (reason=3)
[ 2687.254893] wlan0: moving STA 00:0d:67:25:71:a5 to state 3
[ 2687.254901] wlan0: moving STA 00:0d:67:25:71:a5 to state 2
[ 2687.254911] wlan0: moving STA 00:0d:67:25:71:a5 to state 1
[ 2687.258209] ieee80211 phy0: Removed STA 00:0d:67:25:71:a5
[ 2687.258304] ieee80211 phy0: Destroyed STA 00:0d:67:25:71:a5
[ 2687.267208] ieee80211 phy0: device now idle
[ 2687.267549] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 2687.267749] cfg80211: Calling CRDA to update world regulatory domain
[ 2687.284498] ieee80211 phy0: device no longer idle - scanning
[ 2687.308545] cfg80211: World regulatory domain updated:
[ 2687.308552] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2687.308559] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2687.308564] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2687.308568] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2687.308573] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2687.308578] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2691.253385] wlan0: authenticate with 00:0d:67:2a:7c:0d
[ 2691.253403] ieee80211 phy0: Allocated STA 00:0d:67:2a:7c:0d
[ 2691.274717] ieee80211 phy0: Inserted STA 00:0d:67:2a:7c:0d
[ 2691.274726] wlan0: direct probe to 00:0d:67:2a:7c:0d (try 1/3)
[ 2691.474963] wlan0: send auth to 00:0d:67:2a:7c:0d (try 2/3)
[ 2691.476470] wlan0: authenticated
[ 2691.476477] wlan0: moving STA 00:0d:67:2a:7c:0d to state 2
[ 2691.484962] wlan0: associate with 00:0d:67:2a:7c:0d (try 1/3)
[ 2691.486269] wlan0: RX AssocResp from 00:0d:67:2a:7c:0d (capab=0x401 status=0 aid=1)
[ 2691.486276] wlan0: associated
[ 2691.486302] wlan0: moving STA 00:0d:67:2a:7c:0d to state 3
[ 2691.486313] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2691.486323] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2691.486330] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[ 2691.486338] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[ 2691.497618] cfg80211: Calling CRDA for country: US
[ 2691.499821] wlan0: moving STA 00:0d:67:2a:7c:0d to state 4
[ 2691.559490] ath: regdomain 0x8348 updated by CountryIE
[ 2691.559496] ath: EEPROM regdomain: 0x8348
[ 2691.559499] ath: EEPROM indicates we should expect a country code
[ 2691.559503] ath: doing EEPROM country->regdmn map search
[ 2691.559506] ath: country maps to regdmn code: 0x3a
[ 2691.559510] ath: Country alpha2 being used: US
[ 2691.559512] ath: Regpair used: 0x3a
[ 2691.559553] cfg80211: Regulatory domain changed to country: US
[ 2691.559557] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2691.559562] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 2691.559568] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 2691.559572] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2691.559577] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2691.559581] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2691.559586] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 2702.105687] wlan0: no IPv6 routers present
[ 2737.255419] wlan0: deauthenticating from 00:0d:67:2a:7c:0d by local choice (reason=3)
[ 2737.256127] wlan0: moving STA 00:0d:67:2a:7c:0d to state 3
[ 2737.256133] wlan0: moving STA 00:0d:67:2a:7c:0d to state 2
[ 2737.256141] wlan0: moving STA 00:0d:67:2a:7c:0d to state 1
[ 2737.259762] ieee80211 phy0: Removed STA 00:0d:67:2a:7c:0d
[ 2737.259836] ieee80211 phy0: Destroyed STA 00:0d:67:2a:7c:0d
[ 2737.268125] ieee80211 phy0: device now idle
[ 2737.268444] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 2737.268514] cfg80211: Calling CRDA to update world regulatory domain
[ 2737.285668] ieee80211 phy0: device no longer idle - scanning
[ 2737.312600] cfg80211: World regulatory domain updated:
[ 2737.312607] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2737.312613] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2737.312618] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2737.312623] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2737.312627] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2737.312632] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2741.270145] wlan0: authenticate with 00:0d:67:2a:7c:0d
[ 2741.270158] ieee80211 phy0: Allocated STA 00:0d:67:2a:7c:0d
[ 2741.277621] ieee80211 phy0: Inserted STA 00:0d:67:2a:7c:0d
[ 2741.277628] wlan0: send auth to 00:0d:67:2a:7c:0d (try 1/3)
[ 2741.287989] wlan0: authenticated
[ 2741.287998] wlan0: moving STA 00:0d:67:2a:7c:0d to state 2
[ 2741.296647] wlan0: associate with 00:0d:67:2a:7c:0d (try 1/3)
[ 2741.299988] wlan0: RX AssocResp from 00:0d:67:2a:7c:0d (capab=0x401 status=0 aid=1)
[ 2741.299996] wlan0: associated
[ 2741.300023] wlan0: moving STA 00:0d:67:2a:7c:0d to state 3
[ 2741.300034] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2741.300043] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2741.300051] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[ 2741.300058] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[ 2741.308516] cfg80211: Calling CRDA for country: US
[ 2741.308769] wlan0: moving STA 00:0d:67:2a:7c:0d to state 4
[ 2741.326053] ath: regdomain 0x8348 updated by CountryIE
[ 2741.326059] ath: EEPROM regdomain: 0x8348
[ 2741.326062] ath: EEPROM indicates we should expect a country code
[ 2741.326066] ath: doing EEPROM country->regdmn map search
[ 2741.326070] ath: country maps to regdmn code: 0x3a
[ 2741.326073] ath: Country alpha2 being used: US
[ 2741.326076] ath: Regpair used: 0x3a
[ 2741.326118] cfg80211: Regulatory domain changed to country: US
[ 2741.326121] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2741.326127] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 2741.326132] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 2741.326136] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2741.326141] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2741.326146] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2741.326150] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 2752.192368] wlan0: no IPv6 routers present
[ 2787.256635] wlan0: deauthenticating from 00:0d:67:2a:7c:0d by local choice (reason=3)
[ 2787.256890] wlan0: moving STA 00:0d:67:2a:7c:0d to state 3
[ 2787.256897] wlan0: moving STA 00:0d:67:2a:7c:0d to state 2
[ 2787.256907] wlan0: moving STA 00:0d:67:2a:7c:0d to state 1
[ 2787.260460] ieee80211 phy0: Removed STA 00:0d:67:2a:7c:0d
[ 2787.260554] ieee80211 phy0: Destroyed STA 00:0d:67:2a:7c:0d
[ 2787.270480] ieee80211 phy0: device now idle
[ 2787.270793] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 2787.271510] cfg80211: Calling CRDA to update world regulatory domain
[ 2787.282232] ieee80211 phy0: device no longer idle - scanning
[ 2787.310370] cfg80211: World regulatory domain updated:
[ 2787.310377] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2787.310384] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2787.310389] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2787.310394] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2787.310399] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2787.310403] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2791.265388] ieee80211 phy0: device now idle
[ 2813.054676] ieee80211 phy0: device no longer idle - scanning
[ 2816.971901] ieee80211 phy0: device now idle
[ 2846.057855] ieee80211 phy0: device no longer idle - scanning
[ 2849.975911] ieee80211 phy0: device now idle
[ 2889.053797] ieee80211 phy0: device no longer idle - scanning
[ 2892.972110] ieee80211 phy0: device now idle
[ 2942.061013] ieee80211 phy0: device no longer idle - scanning
[ 2945.977379] ieee80211 phy0: device now idle
[ 2946.110513] ieee80211 phy0: device no longer idle - scanning
[ 2950.022215] wlan0: authenticate with f8:e4:fb:04:59:a4
[ 2950.022232] ieee80211 phy0: Allocated STA f8:e4:fb:04:59:a4
[ 2950.040402] ieee80211 phy0: Inserted STA f8:e4:fb:04:59:a4
[ 2950.040410] wlan0: send auth to f8:e4:fb:04:59:a4 (try 1/3)
[ 2950.241155] wlan0: send auth to f8:e4:fb:04:59:a4 (try 2/3)
[ 2950.243201] wlan0: authenticated
[ 2950.243209] wlan0: moving STA f8:e4:fb:04:59:a4 to state 2
[ 2950.255309] wlan0: associate with f8:e4:fb:04:59:a4 (try 1/3)
[ 2950.258882] wlan0: RX AssocResp from f8:e4:fb:04:59:a4 (capab=0x431 status=0 aid=3)
[ 2950.258890] wlan0: associated
[ 2950.258925] wlan0: moving STA f8:e4:fb:04:59:a4 to state 3
[ 2950.258936] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2950.258945] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 2950.258953] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[ 2950.258961] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[ 2950.277096] cfg80211: Calling CRDA for country: US
[ 2950.292692] ath: regdomain 0x8348 updated by CountryIE
[ 2950.292698] ath: EEPROM regdomain: 0x8348
[ 2950.292701] ath: EEPROM indicates we should expect a country code
[ 2950.292705] ath: doing EEPROM country->regdmn map search
[ 2950.292708] ath: country maps to regdmn code: 0x3a
[ 2950.292712] ath: Country alpha2 being used: US
[ 2950.292714] ath: Regpair used: 0x3a
[ 2950.292754] cfg80211: Regulatory domain changed to country: US
[ 2950.292758] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2950.292764] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 2950.292769] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 2950.292773] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2950.292778] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2950.292783] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2950.292787] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 2952.266037] wlan0: moving STA f8:e4:fb:04:59:a4 to state 4
[ 2962.794924] wlan0: no IPv6 routers present
[ 3525.922218] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 3525.922224] cyapa 7-0067: ======< cyapa_detect >======
[ 3525.922228] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 3525.922231] cyapa 7-0067: ======< cyapa_poll_state >======
[ 3525.922813] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 3525.922817] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 3525.923649] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 3525.923654] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 3525.923657] cyapa 7-0067: device state: operational mode
[ 3525.923661] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 3525.927001] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 3611.092165] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 3611.092183] cyapa 7-0067: ======< cyapa_detect >======
[ 3611.092188] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 3611.092192] cyapa 7-0067: ======< cyapa_poll_state >======
[ 3611.092768] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 3611.092773] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 3611.093614] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 3611.093619] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 3611.093622] cyapa 7-0067: device state: operational mode
[ 3611.093626] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 3611.096973] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 3900.019843] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit
[ 4376.986023] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 4376.986042] cyapa 7-0067: ======< cyapa_detect >======
[ 4376.986046] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 4376.986050] cyapa 7-0067: ======< cyapa_poll_state >======
[ 4376.986632] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 4376.986637] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 4376.987479] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 4376.987484] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 4376.987487] cyapa 7-0067: device state: operational mode
[ 4376.987491] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 4376.990820] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5007.296857] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5007.296866] cyapa 7-0067: ======< cyapa_detect >======
[ 5007.296871] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5007.296876] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5007.297493] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5007.297500] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5007.298416] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5007.298425] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 5007.298431] cyapa 7-0067: device state: operational mode
[ 5007.298436] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5007.301879] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5036.536263] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5036.536272] cyapa 7-0067: ======< cyapa_detect >======
[ 5036.536278] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5036.536283] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5036.536887] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5036.536893] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5036.537731] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5036.537737] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 5036.537741] cyapa 7-0067: device state: operational mode
[ 5036.537746] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5036.541086] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5120.758750] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5120.758756] cyapa 7-0067: ======< cyapa_detect >======
[ 5120.758760] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5120.758764] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5120.759337] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5120.759341] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5120.760224] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5120.760231] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 5120.760235] cyapa 7-0067: device state: operational mode
[ 5120.760238] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5120.763573] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5133.811791] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5133.811797] cyapa 7-0067: ======< cyapa_detect >======
[ 5133.811801] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5133.811805] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5133.812375] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5133.812380] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5133.813218] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5133.813224] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 5133.813227] cyapa 7-0067: device state: operational mode
[ 5133.813231] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5133.816577] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5212.010320] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5212.010327] cyapa 7-0067: ======< cyapa_detect >======
[ 5212.010330] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5212.010334] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5212.010924] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5212.010929] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5212.011778] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5212.011784] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 5212.011787] cyapa 7-0067: device state: operational mode
[ 5212.011791] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5212.015144] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5283.449661] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5283.449668] cyapa 7-0067: ======< cyapa_detect >======
[ 5283.449672] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5283.449675] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5283.450276] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5283.450281] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5283.451130] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5283.451135] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 5283.451138] cyapa 7-0067: device state: operational mode
[ 5283.451143] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5283.454483] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5291.233245] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5291.233252] cyapa 7-0067: ======< cyapa_detect >======
[ 5291.233255] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5291.233259] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5291.233835] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5291.233840] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5291.234673] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5291.234678] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 5291.234682] cyapa 7-0067: device state: operational mode
[ 5291.234685] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5291.238042] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5361.500910] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5361.500917] cyapa 7-0067: ======< cyapa_detect >======
[ 5361.500921] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5361.500925] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5361.501510] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5361.501515] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5361.502348] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5361.502352] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 5361.502356] cyapa 7-0067: device state: operational mode
[ 5361.502359] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5361.505684] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 5773.158342] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 5773.158351] cyapa 7-0067: ======< cyapa_detect >======
[ 5773.158356] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 5773.158361] cyapa 7-0067: ======< cyapa_poll_state >======
[ 5773.158950] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 5773.158954] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 5773.159798] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 5773.159804] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 5773.159808] cyapa 7-0067: device state: operational mode
[ 5773.159811] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 5773.163149] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6023.691637] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6023.691644] cyapa 7-0067: ======< cyapa_detect >======
[ 6023.691648] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6023.691651] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6023.692237] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6023.692241] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6023.693079] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6023.693083] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 6023.693087] cyapa 7-0067: device state: operational mode
[ 6023.693090] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6023.696428] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6095.873813] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6095.873844] cyapa 7-0067: ======< cyapa_detect >======
[ 6095.873850] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6095.873856] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6095.874425] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6095.874429] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6095.875263] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6095.875268] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 6095.875272] cyapa 7-0067: device state: operational mode
[ 6095.875275] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6095.878626] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6109.959701] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6109.959708] cyapa 7-0067: ======< cyapa_detect >======
[ 6109.959711] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6109.959715] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6109.960300] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6109.960305] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6109.961152] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6109.961158] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 6109.961162] cyapa 7-0067: device state: operational mode
[ 6109.961166] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6109.964509] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6259.935550] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6259.935557] cyapa 7-0067: ======< cyapa_detect >======
[ 6259.935560] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6259.935564] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6259.936142] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6259.936146] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6259.936987] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6259.936992] cyapa 7-0067: status registers = [0x8f, 0x18, 0x31]
[ 6259.936995] cyapa 7-0067: device state: operational mode
[ 6259.936999] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6259.940348] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6308.953254] wlan0: detected beacon loss from AP - sending probe request
[ 6309.054394] wlan0: cancelling probereq poll due to a received beacon
[ 6310.957917] wlan0: detected beacon loss from AP - sending probe request
[ 6310.999968] wlan0: cancelling probereq poll due to a received beacon
[ 6312.958413] wlan0: detected beacon loss from AP - sending probe request
[ 6313.047897] wlan0: cancelling probereq poll due to a received beacon
[ 6314.957126] wlan0: detected beacon loss from AP - sending probe request
[ 6314.993409] wlan0: cancelling probereq poll due to a received beacon
[ 6316.953043] wlan0: detected beacon loss from AP - sending probe request
[ 6317.041321] wlan0: cancelling probereq poll due to a received beacon
[ 6318.957068] wlan0: detected beacon loss from AP - sending probe request
[ 6318.986864] wlan0: cancelling probereq poll due to a received beacon
[ 6320.958145] wlan0: detected beacon loss from AP - sending probe request
[ 6321.034855] wlan0: cancelling probereq poll due to a received beacon
[ 6323.952864] wlan0: detected beacon loss from AP - sending probe request
[ 6324.106670] wlan0: cancelling probereq poll due to a received beacon
[ 6325.957839] wlan0: detected beacon loss from AP - sending probe request
[ 6326.052195] wlan0: cancelling probereq poll due to a received beacon
[ 6327.952745] wlan0: detected beacon loss from AP - sending probe request
[ 6327.997758] wlan0: cancelling probereq poll due to a received beacon
[ 6333.960578] wlan0: detected beacon loss from AP - sending probe request
[ 6334.039117] wlan0: cancelling probereq poll due to a received beacon
[ 6340.952398] wlan0: detected beacon loss from AP - sending probe request
[ 6341.002114] wlan0: cancelling probereq poll due to a received beacon
[ 6342.952348] wlan0: detected beacon loss from AP - sending probe request
[ 6343.050038] wlan0: cancelling probereq poll due to a received beacon
[ 6344.952307] wlan0: detected beacon loss from AP - sending probe request
[ 6344.995528] wlan0: cancelling probereq poll due to a received beacon
[ 6346.952240] wlan0: detected beacon loss from AP - sending probe request
[ 6347.043475] wlan0: cancelling probereq poll due to a received beacon
[ 6348.952189] wlan0: detected beacon loss from AP - sending probe request
[ 6348.992003] wlan0: cancelling probereq poll due to a received beacon
[ 6350.952151] wlan0: detected beacon loss from AP - sending probe request
[ 6351.065182] wlan0: cancelling probereq poll due to a received beacon
[ 6352.952215] wlan0: detected beacon loss from AP - sending probe request
[ 6353.085544] wlan0: cancelling probereq poll due to a received beacon
[ 6357.956544] wlan0: detected beacon loss from AP - sending probe request
[ 6358.102320] wlan0: cancelling probereq poll due to a received beacon
[ 6363.951816] wlan0: detected beacon loss from AP - sending probe request
[ 6364.041276] wlan0: cancelling probereq poll due to a received beacon
[ 6365.951740] wlan0: detected beacon loss from AP - sending probe request
[ 6365.986822] wlan0: cancelling probereq poll due to a received beacon
[ 6368.951702] wlan0: detected beacon loss from AP - sending probe request
[ 6369.058748] wlan0: cancelling probereq poll due to a received beacon
[ 6370.951616] wlan0: detected beacon loss from AP - sending probe request
[ 6371.004208] wlan0: cancelling probereq poll due to a received beacon
[ 6372.955730] wlan0: detected beacon loss from AP - sending probe request
[ 6373.052151] wlan0: cancelling probereq poll due to a received beacon
[ 6374.951516] wlan0: detected beacon loss from AP - sending probe request
[ 6374.997713] wlan0: cancelling probereq poll due to a received beacon
[ 6376.951453] wlan0: detected beacon loss from AP - sending probe request
[ 6377.045642] wlan0: cancelling probereq poll due to a received beacon
[ 6378.951424] wlan0: detected beacon loss from AP - sending probe request
[ 6378.991176] wlan0: cancelling probereq poll due to a received beacon
[ 6380.955352] wlan0: detected beacon loss from AP - sending probe request
[ 6381.039057] wlan0: cancelling probereq poll due to a received beacon
[ 6382.951429] wlan0: detected beacon loss from AP - sending probe request
[ 6382.984582] wlan0: cancelling probereq poll due to a received beacon
[ 6384.955273] wlan0: detected beacon loss from AP - sending probe request
[ 6385.032551] wlan0: cancelling probereq poll due to a received beacon
[ 6386.955465] wlan0: detected beacon loss from AP - sending probe request
[ 6386.978051] wlan0: cancelling probereq poll due to a received beacon
[ 6388.951149] wlan0: detected beacon loss from AP - sending probe request
[ 6389.026013] wlan0: cancelling probereq poll due to a received beacon
[ 6393.951018] wlan0: detected beacon loss from AP - sending probe request
[ 6394.043411] wlan0: cancelling probereq poll due to a received beacon
[ 6395.955305] wlan0: detected beacon loss from AP - sending probe request
[ 6395.988974] wlan0: cancelling probereq poll due to a received beacon
[ 6397.955517] wlan0: detected beacon loss from AP - sending probe request
[ 6398.036874] wlan0: cancelling probereq poll due to a received beacon
[ 6402.950791] wlan0: detected beacon loss from AP - sending probe request
[ 6403.054332] wlan0: cancelling probereq poll due to a received beacon
[ 6404.954713] wlan0: detected beacon loss from AP - sending probe request
[ 6405.000341] wlan0: cancelling probereq poll due to a received beacon
[ 6406.950676] wlan0: detected beacon loss from AP - sending probe request
[ 6407.047774] wlan0: cancelling probereq poll due to a received beacon
[ 6408.950612] wlan0: detected beacon loss from AP - sending probe request
[ 6408.993263] wlan0: cancelling probereq poll due to a received beacon
[ 6410.950571] wlan0: detected beacon loss from AP - sending probe request
[ 6411.041273] wlan0: cancelling probereq poll due to a received beacon
[ 6414.958587] wlan0: detected beacon loss from AP - sending probe request
[ 6415.034718] wlan0: cancelling probereq poll due to a received beacon
[ 6416.954896] wlan0: detected beacon loss from AP - sending probe request
[ 6429.950096] wlan0: detected beacon loss from AP - sending probe request
[ 6429.984532] wlan0: cancelling probereq poll due to a received beacon
[ 6431.954373] wlan0: detected beacon loss from AP - sending probe request
[ 6432.032452] wlan0: cancelling probereq poll due to a received beacon
[ 6433.955122] wlan0: detected beacon loss from AP - sending probe request
[ 6433.978374] wlan0: cancelling probereq poll due to a received beacon
[ 6435.955630] wlan0: detected beacon loss from AP - sending probe request
[ 6436.025932] wlan0: cancelling probereq poll due to a received beacon
[ 6437.954003] wlan0: detected beacon loss from AP - sending probe request
[ 6437.971468] wlan0: cancelling probereq poll due to a received beacon
[ 6439.949822] wlan0: detected beacon loss from AP - sending probe request
[ 6440.019386] wlan0: cancelling probereq poll due to a received beacon
[ 6441.953746] wlan0: detected beacon loss from AP - sending probe request
[ 6442.067331] wlan0: cancelling probereq poll due to a received beacon
[ 6443.949704] wlan0: detected beacon loss from AP - sending probe request
[ 6444.013606] wlan0: cancelling probereq poll due to a received beacon
[ 6445.949656] wlan0: detected beacon loss from AP - sending probe request
[ 6446.060753] wlan0: cancelling probereq poll due to a received beacon
[ 6447.949586] wlan0: detected beacon loss from AP - sending probe request
[ 6448.006321] wlan0: cancelling probereq poll due to a received beacon
[ 6449.949537] wlan0: detected beacon loss from AP - sending probe request
[ 6450.054254] wlan0: cancelling probereq poll due to a received beacon
[ 6453.949423] wlan0: detected beacon loss from AP - sending probe request
[ 6454.047670] wlan0: cancelling probereq poll due to a received beacon
[ 6461.957215] wlan0: detected beacon loss from AP - sending probe request
[ 6462.034581] wlan0: cancelling probereq poll due to a received beacon
[ 6463.949889] wlan0: detected beacon loss from AP - sending probe request
[ 6463.980126] wlan0: cancelling probereq poll due to a received beacon
[ 6465.956552] wlan0: detected beacon loss from AP - sending probe request
[ 6466.028518] wlan0: cancelling probereq poll due to a received beacon
[ 6467.949126] wlan0: detected beacon loss from AP - sending probe request
[ 6467.973707] wlan0: cancelling probereq poll due to a received beacon
[ 6469.949006] wlan0: detected beacon loss from AP - sending probe request
[ 6470.021540] wlan0: cancelling probereq poll due to a received beacon
[ 6472.952927] wlan0: detected beacon loss from AP - sending probe request
[ 6472.990998] wlan0: cancelling probereq poll due to a received beacon
[ 6475.953944] wlan0: detected beacon loss from AP - sending probe request
[ 6476.062908] wlan0: cancelling probereq poll due to a received beacon
[ 6477.954514] wlan0: detected beacon loss from AP - sending probe request
[ 6478.008510] wlan0: cancelling probereq poll due to a received beacon
[ 6479.954769] wlan0: detected beacon loss from AP - sending probe request
[ 6480.056406] wlan0: cancelling probereq poll due to a received beacon
[ 6483.948660] wlan0: detected beacon loss from AP - sending probe request
[ 6484.049879] wlan0: cancelling probereq poll due to a received beacon
[ 6487.948548] wlan0: detected beacon loss from AP - sending probe request
[ 6488.043256] wlan0: cancelling probereq poll due to a received beacon
[ 6490.948460] wlan0: detected beacon loss from AP - sending probe request
[ 6491.012756] wlan0: cancelling probereq poll due to a received beacon
[ 6494.956446] wlan0: detected beacon loss from AP - sending probe request
[ 6495.108657] wlan0: cancelling probereq poll due to a received beacon
[ 6496.948307] wlan0: detected beacon loss from AP - sending probe request
[ 6497.054179] wlan0: cancelling probereq poll due to a received beacon
[ 6498.948254] wlan0: detected beacon loss from AP - sending probe request
[ 6498.999782] wlan0: cancelling probereq poll due to a received beacon
[ 6501.952292] wlan0: detected beacon loss from AP - sending probe request
[ 6501.969205] wlan0: cancelling probereq poll due to a received beacon
[ 6502.830137] wlan0: deauthenticating from f8:e4:fb:04:59:a4 by local choice (reason=3)
[ 6502.835458] wlan0: moving STA f8:e4:fb:04:59:a4 to state 3
[ 6502.835466] wlan0: moving STA f8:e4:fb:04:59:a4 to state 2
[ 6502.835474] wlan0: moving STA f8:e4:fb:04:59:a4 to state 1
[ 6502.841140] ieee80211 phy0: Removed STA f8:e4:fb:04:59:a4
[ 6502.841214] ieee80211 phy0: Destroyed STA f8:e4:fb:04:59:a4
[ 6502.849186] ieee80211 phy0: device now idle
[ 6502.849518] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849532] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849542] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849552] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849562] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849572] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849582] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849591] ath: phy0: TX while HW is in FULL_SLEEP mode
[ 6502.849607] wlan0: dropped frame to 00:00:00:00:00:00 (unauthorized port)
[ 6502.873939] cfg80211: Calling CRDA to update world regulatory domain
[ 6502.923980] cfg80211: World regulatory domain updated:
[ 6502.923987] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6502.923993] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6502.923998] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6502.924003] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6502.924007] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6502.924012] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6504.768130] init: anacron main process (3860) killed by TERM signal
[ 6505.863673] PM: Syncing filesystems ... done.
[ 6505.929617] PM: Preparing system for mem sleep
[ 6506.399207] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6506.411156] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6506.422116] PM: Entering mem sleep
[ 6506.422132] Suspending console(s) (use no_console_suspend to debug)
[ 6506.443725] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6506.444042] sd 0:0:0:0: [sda] Stopping disk
[ 6506.829064] PM: suspend of devices complete after 406.824 msecs
[ 6506.829149] PM: late suspend of devices complete after 0.078 msecs
[ 6506.840304] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 6506.851347] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 6506.862167] PM: noirq suspend of devices complete after 33.009 msecs
[ 6506.862494] ACPI: Preparing to enter system sleep state S3
[ 6506.862575] PM: Saving platform NVS memory
[ 6506.862578] Disabling non-boot CPUs ...
[ 6506.864365] CPU 1 is now offline
[ 6506.866273] Disabling VMX on cpu 0
[ 6506.866279] TSC at resume: 418099704
[ 6506.866281] ACPI: Low-level resume complete
[ 6506.866339] PM: Restoring platform NVS memory
[ 6506.866860] Enabling non-boot CPUs ...
[ 6506.866952] Booting Node 0 Processor 1 APIC 0x2
[ 6506.877293] Initializing CPU#1
[ 6506.877302] Disabling VMX on cpu 1
[ 6506.880717] CPU1 is up
[ 6506.882580] ACPI: Waking up from system sleep state S3
[ 6506.884075] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 6506.884453] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 6506.884933] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 6506.885339] PM: noirq resume of devices complete after 1.425 msecs
[ 6506.885434] PM: early resume of devices complete after 0.060 msecs
[ 6506.885476] i915 0000:00:02.0: setting latency timer to 64
[ 6506.885558] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6506.885662] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6506.885780] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6506.885830] ahci 0000:00:1f.2: setting latency timer to 64
[ 6506.885875] ath: phy0: ASPM enabled: 0x43
[ 6506.886279] sd 0:0:0:0: [sda] Starting disk
[ 6507.021347] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6507.022804] CPU0: Package power limit notification (total events = 7)
[ 6507.022850] CPU1: Package power limit notification (total events = 7)
[ 6507.022930] CPU1: Package power limit normal
[ 6507.022934] CPU0: Package power limit normal
[ 6507.116923] usb 1-1.3: reset high-speed USB device number 4 using ehci_hcd
[ 6507.276973] usb 1-1.1: reset full-speed USB device number 7 using ehci_hcd
[ 6507.363296] btusb 1-1.1:1.0: no reset_resume for driver btusb?
[ 6507.363304] btusb 1-1.1:1.1: no reset_resume for driver btusb?
[ 6507.444933] PM: resume of devices complete after 559.507 msecs
[ 6507.448463] PM: Finishing wakeup.
[ 6507.448467] Restarting tasks ... done.
[ 6507.480043] video LNXVIDEO:00: Restoring backlight state
[ 6509.500677] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6509.505457] ata1.00: configured for UDMA/133
[ 6509.704126] cpufreq_interactive: monitoring input on AT Translated Set 2 keyboard
[ 6509.704144] cpufreq_interactive: monitoring input on Cypress APA Trackpad (cyapa)
[ 6509.930293] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6509.942907] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6509.942920] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[ 6509.942931] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[ 6510.506786] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6510.586191] ieee80211 phy0: device no longer idle - scanning
[ 6514.562880] ieee80211 phy0: device now idle
[ 6514.686046] ieee80211 phy0: device no longer idle - scanning
[ 6518.628332] wlan0: authenticate with f8:e4:fb:04:59:a4
[ 6518.628344] ieee80211 phy0: Allocated STA f8:e4:fb:04:59:a4
[ 6518.646513] ieee80211 phy0: Inserted STA f8:e4:fb:04:59:a4
[ 6518.646521] wlan0: send auth to f8:e4:fb:04:59:a4 (try 1/3)
[ 6518.648464] wlan0: authenticated
[ 6518.648473] wlan0: moving STA f8:e4:fb:04:59:a4 to state 2
[ 6518.656406] wlan0: associate with f8:e4:fb:04:59:a4 (try 1/3)
[ 6518.659966] wlan0: RX AssocResp from f8:e4:fb:04:59:a4 (capab=0x431 status=0 aid=6)
[ 6518.659972] wlan0: associated
[ 6518.660007] wlan0: moving STA f8:e4:fb:04:59:a4 to state 3
[ 6518.660018] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 6518.660028] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[ 6518.660036] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[ 6518.660044] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[ 6518.671956] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6518.673193] cfg80211: Calling CRDA for country: US
[ 6518.673422] wlan0: dropped frame to f8:e4:fb:04:59:a4 (unauthorized port)
[ 6518.680141] wlan0: moving STA f8:e4:fb:04:59:a4 to state 4
[ 6518.712760] ath: regdomain 0x8348 updated by CountryIE
[ 6518.712765] ath: EEPROM regdomain: 0x8348
[ 6518.712768] ath: EEPROM indicates we should expect a country code
[ 6518.712772] ath: doing EEPROM country->regdmn map search
[ 6518.712776] ath: country maps to regdmn code: 0x3a
[ 6518.712779] ath: Country alpha2 being used: US
[ 6518.712781] ath: Regpair used: 0x3a
[ 6518.712821] cfg80211: Regulatory domain changed to country: US
[ 6518.712824] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6518.712829] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6518.712834] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6518.712839] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6518.712844] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6518.712848] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6518.712853] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 6521.128888] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6521.128895] cyapa 7-0067: ======< cyapa_detect >======
[ 6521.128899] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6521.128903] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6521.129494] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6521.129499] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6521.130340] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6521.130345] cyapa 7-0067: status registers = [0x8f, 0x18, 0x31]
[ 6521.130349] cyapa 7-0067: device state: operational mode
[ 6521.130353] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6521.133663] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6525.686334] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6525.686341] cyapa 7-0067: ======< cyapa_detect >======
[ 6525.686345] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6525.686348] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6525.686941] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6525.686945] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6525.687780] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6525.687786] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 6525.687789] cyapa 7-0067: device state: operational mode
[ 6525.687793] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6525.691101] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6529.391113] wlan0: no IPv6 routers present
[ 6537.298990] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit
[ 6550.368689] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6550.368695] cyapa 7-0067: ======< cyapa_detect >======
[ 6550.368699] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6550.368703] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6550.369279] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6550.369283] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6550.370122] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6550.370127] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 6550.370130] cyapa 7-0067: device state: operational mode
[ 6550.370134] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6550.373461] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6618.355910] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6618.355917] cyapa 7-0067: ======< cyapa_detect >======
[ 6618.355921] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6618.355924] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6618.356513] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6618.356518] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6618.357355] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6618.357360] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 6618.357364] cyapa 7-0067: device state: operational mode
[ 6618.357367] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6618.360702] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6640.564305] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6640.564312] cyapa 7-0067: ======< cyapa_detect >======
[ 6640.564316] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6640.564319] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6640.564911] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6640.564916] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6640.565761] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6640.565766] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 6640.565770] cyapa 7-0067: device state: operational mode
[ 6640.565774] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6640.569095] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6658.072714] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6658.072730] cyapa 7-0067: ======< cyapa_detect >======
[ 6658.072734] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6658.072737] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6658.073339] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6658.073344] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6658.074177] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6658.074182] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 6658.074185] cyapa 7-0067: device state: operational mode
[ 6658.074189] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6658.077524] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6675.348811] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6675.348818] cyapa 7-0067: ======< cyapa_detect >======
[ 6675.348822] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6675.348825] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6675.349431] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6675.349435] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6675.350283] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6675.350288] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 6675.350292] cyapa 7-0067: device state: operational mode
[ 6675.350295] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6675.353612] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6678.037195] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6678.037217] cyapa 7-0067: ======< cyapa_detect >======
[ 6678.037222] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6678.037226] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6678.037827] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6678.037833] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6678.038665] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6678.038671] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 6678.038675] cyapa 7-0067: device state: operational mode
[ 6678.038678] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6678.042016] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6750.688963] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6750.688969] cyapa 7-0067: ======< cyapa_detect >======
[ 6750.688973] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6750.688977] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6750.689568] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6750.689572] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6750.690403] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6750.690408] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[ 6750.690411] cyapa 7-0067: device state: operational mode
[ 6750.690415] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6750.693748] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6765.387351] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6765.387358] cyapa 7-0067: ======< cyapa_detect >======
[ 6765.387362] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6765.387366] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6765.387940] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6765.387945] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6765.388784] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6765.388790] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 6765.388794] cyapa 7-0067: device state: operational mode
[ 6765.388797] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6765.392127] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6768.384663] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6768.384670] cyapa 7-0067: ======< cyapa_detect >======
[ 6768.384674] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6768.384678] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6768.385259] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6768.385264] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6768.386099] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6768.386105] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 6768.386109] cyapa 7-0067: device state: operational mode
[ 6768.386113] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6768.389437] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 6881.930958] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 6881.930964] cyapa 7-0067: ======< cyapa_detect >======
[ 6881.930968] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 6881.930972] cyapa 7-0067: ======< cyapa_poll_state >======
[ 6881.931555] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 6881.931560] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 6881.932401] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 6881.932407] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 6881.932410] cyapa 7-0067: device state: operational mode
[ 6881.932415] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 6881.935781] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7032.924860] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7032.924876] cyapa 7-0067: ======< cyapa_detect >======
[ 7032.924880] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7032.924884] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7032.925460] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7032.925465] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7032.926299] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7032.926305] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 7032.926308] cyapa 7-0067: device state: operational mode
[ 7032.926312] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7032.929643] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7046.408141] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7046.408149] cyapa 7-0067: ======< cyapa_detect >======
[ 7046.408153] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7046.408157] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7046.408747] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7046.408753] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7046.409593] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7046.409599] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 7046.409603] cyapa 7-0067: device state: operational mode
[ 7046.409607] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7046.412937] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7111.146049] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7111.146055] cyapa 7-0067: ======< cyapa_detect >======
[ 7111.146059] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7111.146063] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7111.146635] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7111.146640] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7111.147478] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7111.147483] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 7111.147487] cyapa 7-0067: device state: operational mode
[ 7111.147490] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7111.150826] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7197.992687] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7197.992693] cyapa 7-0067: ======< cyapa_detect >======
[ 7197.992697] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7197.992701] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7197.993276] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7197.993280] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7197.994117] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7197.994122] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 7197.994126] cyapa 7-0067: device state: operational mode
[ 7197.994129] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7197.997457] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7344.219497] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7344.219504] cyapa 7-0067: ======< cyapa_detect >======
[ 7344.219508] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7344.219511] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7344.220082] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7344.220087] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7344.220924] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7344.220929] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 7344.220933] cyapa 7-0067: device state: operational mode
[ 7344.220937] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7344.224273] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7467.650678] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7467.650685] cyapa 7-0067: ======< cyapa_detect >======
[ 7467.650688] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7467.650692] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7467.651274] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7467.651278] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7467.652111] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7467.652116] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 7467.652120] cyapa 7-0067: device state: operational mode
[ 7467.652123] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7467.655427] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7629.351138] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7629.351145] cyapa 7-0067: ======< cyapa_detect >======
[ 7629.351149] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7629.351153] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7629.351726] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7629.351731] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7629.352564] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7629.352570] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[ 7629.352573] cyapa 7-0067: device state: operational mode
[ 7629.352577] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7629.355909] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 7848.928674] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 7848.928680] cyapa 7-0067: ======< cyapa_detect >======
[ 7848.928684] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 7848.928688] cyapa 7-0067: ======< cyapa_poll_state >======
[ 7848.929272] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 7848.929276] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 7848.930115] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 7848.930120] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 7848.930124] cyapa 7-0067: device state: operational mode
[ 7848.930127] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 7848.933459] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8005.670397] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8005.670403] cyapa 7-0067: ======< cyapa_detect >======
[ 8005.670407] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8005.670411] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8005.670982] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8005.670987] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8005.671826] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8005.671832] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[ 8005.671835] cyapa 7-0067: device state: operational mode
[ 8005.671839] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8005.675175] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8012.537527] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8012.537534] cyapa 7-0067: ======< cyapa_detect >======
[ 8012.537538] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8012.537542] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8012.538147] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8012.538152] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8012.538988] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8012.538994] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 8012.538998] cyapa 7-0067: device state: operational mode
[ 8012.539001] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8012.542340] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8137.397897] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8137.397903] cyapa 7-0067: ======< cyapa_detect >======
[ 8137.397907] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8137.397911] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8137.398503] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8137.398508] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8137.399346] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8137.399352] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[ 8137.399355] cyapa 7-0067: device state: operational mode
[ 8137.399359] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8137.402697] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8268.811410] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8268.811416] cyapa 7-0067: ======< cyapa_detect >======
[ 8268.811420] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8268.811424] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8268.812021] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8268.812027] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8268.812863] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8268.812868] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 8268.812872] cyapa 7-0067: device state: operational mode
[ 8268.812876] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8268.816196] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8297.866615] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8297.866623] cyapa 7-0067: ======< cyapa_detect >======
[ 8297.866627] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8297.866631] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8297.867209] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8297.867214] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8297.868052] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8297.868058] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 8297.868062] cyapa 7-0067: device state: operational mode
[ 8297.868066] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8297.871393] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8302.428732] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8302.428739] cyapa 7-0067: ======< cyapa_detect >======
[ 8302.428742] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8302.428746] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8302.429330] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8302.429335] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8302.430177] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8302.430183] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 8302.430186] cyapa 7-0067: device state: operational mode
[ 8302.430190] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8302.433528] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8340.453684] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8340.453690] cyapa 7-0067: ======< cyapa_detect >======
[ 8340.453694] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8340.453697] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8340.454270] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8340.454275] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8340.455112] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8340.455118] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 8340.455122] cyapa 7-0067: device state: operational mode
[ 8340.455125] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8340.458450] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8345.736335] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8345.736353] cyapa 7-0067: ======< cyapa_detect >======
[ 8345.736357] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8345.736361] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8345.736947] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8345.736952] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8345.737791] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8345.737796] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 8345.737800] cyapa 7-0067: device state: operational mode
[ 8345.737804] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8345.741123] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8356.115257] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8356.115264] cyapa 7-0067: ======< cyapa_detect >======
[ 8356.115268] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8356.115272] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8356.115854] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8356.115860] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8356.116694] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8356.116700] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 8356.116704] cyapa 7-0067: device state: operational mode
[ 8356.116708] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8356.120035] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8361.357953] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8361.357959] cyapa 7-0067: ======< cyapa_detect >======
[ 8361.357963] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8361.357967] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8361.358540] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8361.358546] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8361.359390] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8361.359397] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 8361.359401] cyapa 7-0067: device state: operational mode
[ 8361.359405] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8361.362728] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8365.784055] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8365.784061] cyapa 7-0067: ======< cyapa_detect >======
[ 8365.784065] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8365.784069] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8365.784647] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8365.784651] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8365.785487] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8365.785493] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 8365.785496] cyapa 7-0067: device state: operational mode
[ 8365.785500] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8365.788847] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8417.408567] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8417.408573] cyapa 7-0067: ======< cyapa_detect >======
[ 8417.408577] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8417.408581] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8417.409168] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8417.409173] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8417.410011] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8417.410017] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 8417.410021] cyapa 7-0067: device state: operational mode
[ 8417.410025] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8417.413359] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8440.830976] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8440.830983] cyapa 7-0067: ======< cyapa_detect >======
[ 8440.830987] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8440.830990] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8440.831569] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8440.831573] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8440.832407] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8440.832412] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 8440.832416] cyapa 7-0067: device state: operational mode
[ 8440.832420] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8440.835756] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8445.980762] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8445.980769] cyapa 7-0067: ======< cyapa_detect >======
[ 8445.980772] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8445.980776] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8445.981367] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8445.981372] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8445.982213] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8445.982219] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 8445.982223] cyapa 7-0067: device state: operational mode
[ 8445.982226] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8445.985550] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8880.216392] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8880.216399] cyapa 7-0067: ======< cyapa_detect >======
[ 8880.216402] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8880.216406] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8880.216999] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8880.217004] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8880.217842] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8880.217848] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 8880.217852] cyapa 7-0067: device state: operational mode
[ 8880.217855] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8880.221189] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8914.282492] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8914.282499] cyapa 7-0067: ======< cyapa_detect >======
[ 8914.282502] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8914.282506] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8914.283096] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8914.283101] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8914.283939] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8914.283944] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 8914.283948] cyapa 7-0067: device state: operational mode
[ 8914.283951] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8914.287277] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8937.809753] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8937.809760] cyapa 7-0067: ======< cyapa_detect >======
[ 8937.809764] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8937.809778] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8937.810359] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8937.810363] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8937.811199] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8937.811204] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 8937.811207] cyapa 7-0067: device state: operational mode
[ 8937.811211] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8937.814532] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 8979.914883] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 8979.914890] cyapa 7-0067: ======< cyapa_detect >======
[ 8979.914893] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 8979.914897] cyapa 7-0067: ======< cyapa_poll_state >======
[ 8979.915466] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 8979.915471] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 8979.916311] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 8979.916316] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 8979.916320] cyapa 7-0067: device state: operational mode
[ 8979.916324] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 8979.919648] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9097.653586] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9097.653592] cyapa 7-0067: ======< cyapa_detect >======
[ 9097.653596] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9097.653599] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9097.654180] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9097.654185] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9097.655020] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9097.655025] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9097.655028] cyapa 7-0067: device state: operational mode
[ 9097.655032] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9097.658369] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9142.831741] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9142.831747] cyapa 7-0067: ======< cyapa_detect >======
[ 9142.831751] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9142.831754] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9142.832329] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9142.832333] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9142.833171] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9142.833176] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 9142.833180] cyapa 7-0067: device state: operational mode
[ 9142.833184] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9142.836515] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9181.511579] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9181.511586] cyapa 7-0067: ======< cyapa_detect >======
[ 9181.511589] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9181.511593] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9181.512184] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9181.512188] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9181.513025] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9181.513030] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9181.513033] cyapa 7-0067: device state: operational mode
[ 9181.513037] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9181.516382] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9455.339971] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9455.339977] cyapa 7-0067: ======< cyapa_detect >======
[ 9455.339981] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9455.339985] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9455.340576] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9455.340581] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9455.341417] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9455.341423] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9455.341427] cyapa 7-0067: device state: operational mode
[ 9455.341430] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9455.344762] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9460.885909] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9460.885916] cyapa 7-0067: ======< cyapa_detect >======
[ 9460.885919] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9460.885923] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9460.886499] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9460.886503] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9460.887344] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9460.887348] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9460.887352] cyapa 7-0067: device state: operational mode
[ 9460.887355] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9460.890673] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9473.304498] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9473.304505] cyapa 7-0067: ======< cyapa_detect >======
[ 9473.304509] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9473.304513] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9473.305078] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9473.305082] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9473.305918] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9473.305923] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9473.305926] cyapa 7-0067: device state: operational mode
[ 9473.305930] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9473.309255] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9484.974418] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9484.974424] cyapa 7-0067: ======< cyapa_detect >======
[ 9484.974428] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9484.974432] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9484.975019] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9484.975024] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9484.975862] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9484.975868] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 9484.975871] cyapa 7-0067: device state: operational mode
[ 9484.975875] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9484.979205] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9510.150007] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9510.150014] cyapa 7-0067: ======< cyapa_detect >======
[ 9510.150017] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9510.150021] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9510.150601] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9510.150605] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9510.151439] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9510.151443] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9510.151447] cyapa 7-0067: device state: operational mode
[ 9510.151451] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9510.154785] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9574.139271] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9574.139278] cyapa 7-0067: ======< cyapa_detect >======
[ 9574.139281] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9574.139285] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9574.139876] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9574.139881] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9574.140715] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9574.140720] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9574.140723] cyapa 7-0067: device state: operational mode
[ 9574.140727] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9574.144072] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9654.962888] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9654.962894] cyapa 7-0067: ======< cyapa_detect >======
[ 9654.962898] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9654.962902] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9654.963491] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9654.963496] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9654.964330] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9654.964335] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9654.964339] cyapa 7-0067: device state: operational mode
[ 9654.964342] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9654.967675] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9725.559134] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9725.559141] cyapa 7-0067: ======< cyapa_detect >======
[ 9725.559144] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9725.559148] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9725.559737] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9725.559741] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9725.560581] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9725.560586] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[ 9725.560590] cyapa 7-0067: device state: operational mode
[ 9725.560593] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9725.563918] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9754.455488] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9754.455495] cyapa 7-0067: ======< cyapa_detect >======
[ 9754.455499] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9754.455503] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9754.456088] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9754.456093] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9754.456930] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9754.456935] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[ 9754.456939] cyapa 7-0067: device state: operational mode
[ 9754.456943] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9754.460263] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9765.968277] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9765.968285] cyapa 7-0067: ======< cyapa_detect >======
[ 9765.968289] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9765.968293] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9765.968865] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9765.968870] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9765.969703] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9765.969710] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9765.969713] cyapa 7-0067: device state: operational mode
[ 9765.969717] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9765.973057] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9814.614687] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9814.614701] cyapa 7-0067: ======< cyapa_detect >======
[ 9814.614705] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9814.614722] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9814.615296] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9814.615301] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9814.616140] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9814.616145] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9814.616148] cyapa 7-0067: device state: operational mode
[ 9814.616152] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9814.619470] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9826.987834] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9826.987841] cyapa 7-0067: ======< cyapa_detect >======
[ 9826.987845] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9826.987849] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9826.988444] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9826.988449] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9826.989298] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9826.989304] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[ 9826.989308] cyapa 7-0067: device state: operational mode
[ 9826.989312] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9826.992626] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9884.036148] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9884.036154] cyapa 7-0067: ======< cyapa_detect >======
[ 9884.036158] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9884.036162] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9884.036789] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9884.036796] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9884.037637] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9884.037641] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 9884.037645] cyapa 7-0067: device state: operational mode
[ 9884.037649] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9884.040980] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9908.585507] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9908.585514] cyapa 7-0067: ======< cyapa_detect >======
[ 9908.585517] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9908.585521] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9908.586110] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9908.586115] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9908.586954] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9908.586960] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 9908.586963] cyapa 7-0067: device state: operational mode
[ 9908.586967] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9908.590291] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9929.759242] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9929.759249] cyapa 7-0067: ======< cyapa_detect >======
[ 9929.759253] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9929.759256] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9929.759826] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9929.759830] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9929.760668] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9929.760673] cyapa 7-0067: status registers = [0x8f, 0x18, 0x30]
[ 9929.760677] cyapa 7-0067: device state: operational mode
[ 9929.760692] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9929.764021] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[ 9958.772061] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[ 9958.772067] cyapa 7-0067: ======< cyapa_detect >======
[ 9958.772071] cyapa 7-0067: ======< cyapa_check_is_operational >======
[ 9958.772075] cyapa 7-0067: ======< cyapa_poll_state >======
[ 9958.772647] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[ 9958.772652] cyapa 7-0067: smbus: probing with BL_STATUS command
[ 9958.773485] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[ 9958.773491] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[ 9958.773495] cyapa 7-0067: device state: operational mode
[ 9958.773498] cyapa 7-0067: ======< cyapa_get_query_data >======
[ 9958.776835] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10015.443697] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10015.443704] cyapa 7-0067: ======< cyapa_detect >======
[10015.443709] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10015.443714] cyapa 7-0067: ======< cyapa_poll_state >======
[10015.444316] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10015.444321] cyapa 7-0067: smbus: probing with BL_STATUS command
[10015.445164] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10015.445171] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10015.445174] cyapa 7-0067: device state: operational mode
[10015.445178] cyapa 7-0067: ======< cyapa_get_query_data >======
[10015.448521] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10026.189677] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10026.189684] cyapa 7-0067: ======< cyapa_detect >======
[10026.189687] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10026.189691] cyapa 7-0067: ======< cyapa_poll_state >======
[10026.190281] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10026.190285] cyapa 7-0067: smbus: probing with BL_STATUS command
[10026.191122] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10026.191127] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10026.191130] cyapa 7-0067: device state: operational mode
[10026.191134] cyapa 7-0067: ======< cyapa_get_query_data >======
[10026.194459] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10049.264558] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10049.264564] cyapa 7-0067: ======< cyapa_detect >======
[10049.264568] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10049.264572] cyapa 7-0067: ======< cyapa_poll_state >======
[10049.265151] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10049.265156] cyapa 7-0067: smbus: probing with BL_STATUS command
[10049.265992] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10049.265997] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10049.266001] cyapa 7-0067: device state: operational mode
[10049.266005] cyapa 7-0067: ======< cyapa_get_query_data >======
[10049.269335] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10057.092607] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10057.092613] cyapa 7-0067: ======< cyapa_detect >======
[10057.092617] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10057.092621] cyapa 7-0067: ======< cyapa_poll_state >======
[10057.093190] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10057.093195] cyapa 7-0067: smbus: probing with BL_STATUS command
[10057.094029] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10057.094034] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10057.094037] cyapa 7-0067: device state: operational mode
[10057.094041] cyapa 7-0067: ======< cyapa_get_query_data >======
[10057.097385] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10074.318878] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10074.318917] cyapa 7-0067: ======< cyapa_detect >======
[10074.318921] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10074.318925] cyapa 7-0067: ======< cyapa_poll_state >======
[10074.319506] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10074.319512] cyapa 7-0067: smbus: probing with BL_STATUS command
[10074.320346] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10074.320351] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10074.320354] cyapa 7-0067: device state: operational mode
[10074.320358] cyapa 7-0067: ======< cyapa_get_query_data >======
[10074.323691] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10274.178665] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10274.178672] cyapa 7-0067: ======< cyapa_detect >======
[10274.178676] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10274.178680] cyapa 7-0067: ======< cyapa_poll_state >======
[10274.179282] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10274.179286] cyapa 7-0067: smbus: probing with BL_STATUS command
[10274.180121] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10274.180126] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10274.180130] cyapa 7-0067: device state: operational mode
[10274.180134] cyapa 7-0067: ======< cyapa_get_query_data >======
[10274.183463] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10280.565456] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10280.565478] cyapa 7-0067: ======< cyapa_detect >======
[10280.565482] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10280.565486] cyapa 7-0067: ======< cyapa_poll_state >======
[10280.566074] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10280.566079] cyapa 7-0067: smbus: probing with BL_STATUS command
[10280.566916] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10280.566921] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[10280.566925] cyapa 7-0067: device state: operational mode
[10280.566929] cyapa 7-0067: ======< cyapa_get_query_data >======
[10280.570264] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10336.229995] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10336.230024] cyapa 7-0067: ======< cyapa_detect >======
[10336.230029] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10336.230033] cyapa 7-0067: ======< cyapa_poll_state >======
[10336.230628] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10336.230634] cyapa 7-0067: smbus: probing with BL_STATUS command
[10336.231474] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10336.231480] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10336.231484] cyapa 7-0067: device state: operational mode
[10336.231487] cyapa 7-0067: ======< cyapa_get_query_data >======
[10336.234809] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10341.112863] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10341.112883] cyapa 7-0067: ======< cyapa_detect >======
[10341.112887] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10341.112891] cyapa 7-0067: ======< cyapa_poll_state >======
[10341.113472] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10341.113477] cyapa 7-0067: smbus: probing with BL_STATUS command
[10341.114312] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10341.114317] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[10341.114321] cyapa 7-0067: device state: operational mode
[10341.114324] cyapa 7-0067: ======< cyapa_get_query_data >======
[10341.117656] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10355.143474] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[10355.143481] cyapa 7-0067: ======< cyapa_detect >======
[10355.143485] cyapa 7-0067: ======< cyapa_check_is_operational >======
[10355.143489] cyapa 7-0067: ======< cyapa_poll_state >======
[10355.144102] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[10355.144108] cyapa 7-0067: smbus: probing with BL_STATUS command
[10355.144941] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[10355.144947] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[10355.144951] cyapa 7-0067: device state: operational mode
[10355.144955] cyapa 7-0067: ======< cyapa_get_query_data >======
[10355.148275] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[10365.761615] wlan0: deauthenticating from f8:e4:fb:04:59:a4 by local choice (reason=3)
[10365.771281] wlan0: moving STA f8:e4:fb:04:59:a4 to state 3
[10365.771288] wlan0: moving STA f8:e4:fb:04:59:a4 to state 2
[10365.771295] wlan0: moving STA f8:e4:fb:04:59:a4 to state 1
[10365.775236] ieee80211 phy0: Removed STA f8:e4:fb:04:59:a4
[10365.775301] ieee80211 phy0: Destroyed STA f8:e4:fb:04:59:a4
[10365.782802] ieee80211 phy0: device now idle
[10365.815881] cfg80211: Calling CRDA to update world regulatory domain
[10365.891987] cfg80211: World regulatory domain updated:
[10365.891993] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10365.892000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10365.892005] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10365.892010] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10365.892014] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10365.892019] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10368.428264] PM: Syncing filesystems ... done.
[10368.882701] PM: Preparing system for mem sleep
[10369.168252] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10369.180265] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10369.191219] PM: Entering mem sleep
[10369.191237] Suspending console(s) (use no_console_suspend to debug)
[10369.192651] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10369.192949] sd 0:0:0:0: [sda] Stopping disk
[10369.582167] PM: suspend of devices complete after 390.822 msecs
[10369.582250] PM: late suspend of devices complete after 0.076 msecs
[10369.593358] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[10369.604402] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[10369.615212] PM: noirq suspend of devices complete after 32.953 msecs
[10369.615667] ACPI: Preparing to enter system sleep state S3
[10369.615748] PM: Saving platform NVS memory
[10369.615751] Disabling non-boot CPUs ...
[10369.617421] CPU 1 is now offline
[10369.619379] Disabling VMX on cpu 0
[10369.619385] TSC at resume: 397795024
[10369.619387] ACPI: Low-level resume complete
[10369.619445] PM: Restoring platform NVS memory
[10369.619979] Enabling non-boot CPUs ...
[10369.620071] Booting Node 0 Processor 1 APIC 0x2
[10369.630412] Initializing CPU#1
[10369.630421] Disabling VMX on cpu 1
[10369.633834] CPU1 is up
[10369.635695] ACPI: Waking up from system sleep state S3
[10369.637246] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[10369.637630] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[10369.638529] PM: noirq resume of devices complete after 1.444 msecs
[10369.638626] PM: early resume of devices complete after 0.060 msecs
[10369.638730] i915 0000:00:02.0: setting latency timer to 64
[10369.638747] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[10369.638844] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[10369.638952] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[10369.639002] ahci 0000:00:1f.2: setting latency timer to 64
[10369.639046] ath: phy0: ASPM enabled: 0x43
[10369.640928] sd 0:0:0:0: [sda] Starting disk
[10369.723137] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[10369.724563] CPU0: Package power limit notification (total events = 11)
[10369.724570] CPU1: Package power limit notification (total events = 11)
[10369.724621] CPU1: Package power limit normal
[10369.724636] CPU0: Package power limit normal
[10369.870034] usb 1-1.3: reset high-speed USB device number 4 using ehci_hcd
[10370.020039] usb 1-1.1: reset full-speed USB device number 7 using ehci_hcd
[10370.105100] usb 1-1.1: device firmware changed
[10370.249574] PM: resume of devices complete after 610.957 msecs
[10370.249897] PM: Finishing wakeup.
[10370.249900] Restarting tasks ... 
[10370.261635] usb 1-1.1: USB disconnect, device number 7
[10370.274122] done.
[10370.274132] video LNXVIDEO:00: Restoring backlight state
[10370.334917] usb 1-1.1: new full-speed USB device number 8 using ehci_hcd
[10370.421900] usb 1-1.1: string descriptor 0 read error: -22
[10370.421918] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
[10370.421924] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10370.664899] usb 1-1.1: USB disconnect, device number 8
[10370.846908] usb 1-1.1: new full-speed USB device number 9 using ehci_hcd
[10370.934115] usb 1-1.1: string descriptor 0 read error: -22
[10370.934132] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
[10370.934138] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10372.249779] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10372.254950] ata1.00: configured for UDMA/133
[10372.504497] cpufreq_interactive: monitoring input on AT Translated Set 2 keyboard
[10372.504514] cpufreq_interactive: monitoring input on Cypress APA Trackpad (cyapa)
[10373.394663] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10373.400480] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[10373.400495] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[10373.400506] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[10373.967880] ADDRCONF(NETDEV_UP): eth0: link is not ready
[10374.092449] ieee80211 phy0: device no longer idle - scanning
[10378.069552] ieee80211 phy0: device now idle
[10378.472713] ieee80211 phy0: device no longer idle - scanning
[10382.413258] wlan0: authenticate with 00:0d:67:25:8d:d9
[10382.413270] ieee80211 phy0: Allocated STA 00:0d:67:25:8d:d9
[10382.442552] ieee80211 phy0: Inserted STA 00:0d:67:25:8d:d9
[10382.442561] wlan0: send auth to 00:0d:67:25:8d:d9 (try 1/3)
[10382.444518] wlan0: authenticated
[10382.444524] wlan0: moving STA 00:0d:67:25:8d:d9 to state 2
[10382.458674] wlan0: associate with 00:0d:67:25:8d:d9 (try 1/3)
[10382.460007] wlan0: RX AssocResp from 00:0d:67:25:8d:d9 (capab=0x401 status=0 aid=1)
[10382.460014] wlan0: associated
[10382.460041] wlan0: moving STA 00:0d:67:25:8d:d9 to state 3
[10382.460053] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10382.460062] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10382.460069] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[10382.460077] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[10382.478043] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[10382.478426] cfg80211: Calling CRDA for country: US
[10382.479062] wlan0: moving STA 00:0d:67:25:8d:d9 to state 4
[10382.493342] ath: regdomain 0x8348 updated by CountryIE
[10382.493348] ath: EEPROM regdomain: 0x8348
[10382.493351] ath: EEPROM indicates we should expect a country code
[10382.493355] ath: doing EEPROM country->regdmn map search
[10382.493358] ath: country maps to regdmn code: 0x3a
[10382.493362] ath: Country alpha2 being used: US
[10382.493364] ath: Regpair used: 0x3a
[10382.493405] cfg80211: Regulatory domain changed to country: US
[10382.493408] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10382.493414] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10382.493419] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10382.493423] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10382.493428] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10382.493433] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10382.493438] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10392.843202] wlan0: no IPv6 routers present
[10440.292235] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 1/100
[10440.294303] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 2/100
[10440.296026] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 3/100
[10440.297972] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 4/100
[10440.300450] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 5/100
[10440.303964] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 6/100
[10440.306009] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 7/100
[10440.307967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 8/100
[10440.309969] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 9/100
[10440.311965] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 10/100
[10440.313965] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 11/100
[10440.315967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 12/100
[10440.317967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 13/100
[10440.319966] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 14/100
[10440.321965] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 15/100
[10440.323963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 16/100
[10440.325968] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 17/100
[10440.327967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 18/100
[10440.331102] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 19/100
[10440.332972] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 20/100
[10440.334969] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 21/100
[10440.336969] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 22/100
[10440.338964] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 23/100
[10440.340966] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 24/100
[10440.342969] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 25/100
[10440.344965] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 26/100
[10440.346970] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 27/100
[10440.348981] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 28/100
[10440.351057] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 29/100
[10440.355121] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 30/100
[10440.357698] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 31/100
[10440.360983] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 32/100
[10440.363608] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 33/100
[10440.365200] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 34/100
[10440.366970] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 35/100
[10440.369012] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 36/100
[10440.370981] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 37/100
[10440.373657] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 38/100
[10440.375023] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 39/100
[10440.376979] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 40/100
[10440.378978] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 41/100
[10440.380979] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 42/100
[10440.382970] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 43/100
[10440.384972] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 44/100
[10440.386965] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 45/100
[10440.388965] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 46/100
[10440.392007] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 47/100
[10440.393996] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 48/100
[10440.395960] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 49/100
[10440.397963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 50/100
[10440.399977] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 51/100
[10440.401961] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 52/100
[10440.403962] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 53/100
[10440.405960] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 54/100
[10440.407969] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 55/100
[10440.410002] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 56/100
[10440.412018] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 57/100
[10440.413963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 58/100
[10440.415983] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 59/100
[10440.417962] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 60/100
[10440.419977] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 61/100
[10440.421961] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 62/100
[10440.423960] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 63/100
[10440.426250] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 64/100
[10440.428139] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 65/100
[10440.431973] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 66/100
[10440.433963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 67/100
[10440.435964] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 68/100
[10440.437973] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 69/100
[10440.439964] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 70/100
[10440.441964] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 71/100
[10440.443969] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 72/100
[10440.445963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 73/100
[10440.447963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 74/100
[10440.452661] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 75/100
[10440.455963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 76/100
[10440.458114] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 77/100
[10440.459994] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 78/100
[10440.461964] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 79/100
[10440.463969] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 80/100
[10440.465966] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 81/100
[10440.467987] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 82/100
[10440.469967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 83/100
[10440.472274] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 84/100
[10440.474157] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 85/100
[10440.475967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 86/100
[10440.478096] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 87/100
[10440.480089] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 88/100
[10440.482139] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 89/100
[10440.484034] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 90/100
[10440.485966] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 91/100
[10440.487967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 92/100
[10440.489977] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 93/100
[10440.491966] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 94/100
[10440.493967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 95/100
[10440.495963] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 96/100
[10440.497967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 97/100
[10440.499967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 98/100
[10440.502032] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, try 99/100
[10440.504136] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:25:8d:d9, disconnecting.
[10440.504319] wlan0: moving STA 00:0d:67:25:8d:d9 to state 3
[10440.504324] wlan0: moving STA 00:0d:67:25:8d:d9 to state 2
[10440.504330] wlan0: moving STA 00:0d:67:25:8d:d9 to state 1
[10440.507966] ieee80211 phy0: Removed STA 00:0d:67:25:8d:d9
[10440.508039] ieee80211 phy0: Destroyed STA 00:0d:67:25:8d:d9
[10440.521144] wlan0: authenticate with 00:0d:67:2a:00:55
[10440.521157] ieee80211 phy0: Allocated STA 00:0d:67:2a:00:55
[10440.538349] ieee80211 phy0: Inserted STA 00:0d:67:2a:00:55
[10440.538359] wlan0: direct probe to 00:0d:67:2a:00:55 (try 1/3)
[10440.539357] cfg80211: Calling CRDA to update world regulatory domain
[10440.585610] cfg80211: World regulatory domain updated:
[10440.585617] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10440.585623] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10440.585628] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10440.585633] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[10440.585638] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10440.585643] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10440.933005] wlan0: direct probe to 00:0d:67:2a:00:55 (try 2/3)
[10441.180473] wlan0: send auth to 00:0d:67:2a:00:55 (try 3/3)
[10441.186511] wlan0: authenticated
[10441.186519] wlan0: moving STA 00:0d:67:2a:00:55 to state 2
[10441.420860] wlan0: moving STA 00:0d:67:2a:00:55 to state 1
[10441.424949] ieee80211 phy0: Removed STA 00:0d:67:2a:00:55
[10441.425028] ieee80211 phy0: Destroyed STA 00:0d:67:2a:00:55
[10441.425041] wlan0: authenticate with 00:0d:67:2a:00:4d
[10441.425049] ieee80211 phy0: Allocated STA 00:0d:67:2a:00:4d
[10441.433576] ieee80211 phy0: Inserted STA 00:0d:67:2a:00:4d
[10441.433582] wlan0: send auth to 00:0d:67:2a:00:4d (try 1/3)
[10441.434244] wlan0: authenticated
[10441.434250] wlan0: moving STA 00:0d:67:2a:00:4d to state 2
[10441.442791] wlan0: associate with 00:0d:67:2a:00:4d (try 1/3)
[10441.444121] wlan0: RX AssocResp from 00:0d:67:2a:00:4d (capab=0x401 status=0 aid=2)
[10441.444128] wlan0: associated
[10441.444155] wlan0: moving STA 00:0d:67:2a:00:4d to state 3
[10441.444166] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10441.444176] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10441.444184] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[10441.444191] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[10441.452708] cfg80211: Calling CRDA for country: US
[10441.483897] wlan0: moving STA 00:0d:67:2a:00:4d to state 4
[10441.484425] ath: regdomain 0x8348 updated by CountryIE
[10441.484430] ath: EEPROM regdomain: 0x8348
[10441.484433] ath: EEPROM indicates we should expect a country code
[10441.484437] ath: doing EEPROM country->regdmn map search
[10441.484441] ath: country maps to regdmn code: 0x3a
[10441.484444] ath: Country alpha2 being used: US
[10441.484447] ath: Regpair used: 0x3a
[10441.484488] cfg80211: Regulatory domain changed to country: US
[10441.484491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10441.484497] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10441.484502] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10441.484507] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10441.484511] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10441.484516] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10441.484520] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[10458.851499] wlan0: detected beacon loss from AP - sending probe request
[10458.886064] wlan0: cancelling probereq poll due to a received beacon
[10482.808062] wlan0: moving STA 00:0d:67:2a:00:4d to state 3
[10482.808070] wlan0: moving STA 00:0d:67:2a:00:4d to state 2
[10482.808077] wlan0: moving STA 00:0d:67:2a:00:4d to state 1
[10482.812201] ieee80211 phy0: Removed STA 00:0d:67:2a:00:4d
[10482.812281] ieee80211 phy0: Destroyed STA 00:0d:67:2a:00:4d
[10482.833365] wlan0: authenticate with 00:0d:67:2a:7c:15
[10482.833378] ieee80211 phy0: Allocated STA 00:0d:67:2a:7c:15
[10482.887910] ieee80211 phy0: Inserted STA 00:0d:67:2a:7c:15
[10482.887919] wlan0: direct probe to 00:0d:67:2a:7c:15 (try 1/3)
[10483.088847] wlan0: send auth to 00:0d:67:2a:7c:15 (try 2/3)
[10483.094951] wlan0: authenticated
[10483.094959] wlan0: moving STA 00:0d:67:2a:7c:15 to state 2
[10483.106836] wlan0: associate with 00:0d:67:2a:7c:15 (try 1/3)
[10483.307839] wlan0: associate with 00:0d:67:2a:7c:15 (try 2/3)
[10483.508824] wlan0: associate with 00:0d:67:2a:7c:15 (try 3/3)
[10483.709854] wlan0: association with 00:0d:67:2a:7c:15 timed out
[10483.709873] wlan0: moving STA 00:0d:67:2a:7c:15 to state 1
[10483.715882] ieee80211 phy0: Removed STA 00:0d:67:2a:7c:15
[10483.715962] ieee80211 phy0: Destroyed STA 00:0d:67:2a:7c:15
[10483.715980] ieee80211 phy0: device now idle
[10483.820327] ieee80211 phy0: device no longer idle - scanning
[10483.977832] ieee80211 phy0: device now idle
[10483.979915] wlan0: authenticate with 00:0d:67:2c:a6:11
[10483.979927] ieee80211 phy0: Allocated STA 00:0d:67:2c:a6:11
[10483.986703] ieee80211 phy0: device no longer idle - in use
[10484.016220] ieee80211 phy0: Inserted STA 00:0d:67:2c:a6:11
[10484.016228] wlan0: send auth to 00:0d:67:2c:a6:11 (try 1/3)
[10484.023822] wlan0: authenticated
[10484.023830] wlan0: moving STA 00:0d:67:2c:a6:11 to state 2
[10484.037715] wlan0: associate with 00:0d:67:2c:a6:11 (try 1/3)
[10484.044605] wlan0: RX AssocResp from 00:0d:67:2c:a6:11 (capab=0x421 status=0 aid=1)
[10484.044613] wlan0: associated
[10484.044643] wlan0: moving STA 00:0d:67:2c:a6:11 to state 3
[10484.044655] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10484.044665] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10484.044673] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[10484.044680] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[10484.081150] wlan0: moving STA 00:0d:67:2c:a6:11 to state 4
[10485.850896] wlan0: detected beacon loss from AP - sending probe request
[10485.854776] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10486.023290] wlan0: cancelling probereq poll due to a received beacon
[10533.845948] wlan0: detected beacon loss from AP - sending probe request
[10533.848982] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10533.852545] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10533.856526] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10533.860518] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 4/100
[10566.844641] wlan0: detected beacon loss from AP - sending probe request
[10566.847636] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10566.851644] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10566.855639] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10567.221238] wlan0: cancelling probereq poll due to a received beacon
[10582.850216] wlan0: detected beacon loss from AP - sending probe request
[10584.844166] wlan0: detected beacon loss from AP - sending probe request
[10584.849117] wlan0: cancelling probereq poll due to a received beacon
[10586.844119] wlan0: detected beacon loss from AP - sending probe request
[10601.847720] wlan0: detected beacon loss from AP - sending probe request
[10603.847932] wlan0: detected beacon loss from AP - sending probe request
[10605.847729] wlan0: detected beacon loss from AP - sending probe request
[10614.850373] wlan0: detected beacon loss from AP - sending probe request
[10615.039895] wlan0: cancelling probereq poll due to a received beacon
[10637.842776] wlan0: detected beacon loss from AP - sending probe request
[10638.181542] wlan0: cancelling probereq poll due to a received beacon
[10646.842541] wlan0: detected beacon loss from AP - sending probe request
[10646.846160] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10646.849595] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10646.853576] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10647.260535] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 4/100
[10652.842390] wlan0: detected beacon loss from AP - sending probe request
[10652.845658] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10652.849629] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10652.853379] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10652.857401] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 4/100
[10652.861377] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 5/100
[10652.865391] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 6/100
[10652.870585] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 7/100
[10652.874389] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 8/100
[10652.878390] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 9/100
[10652.882388] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 10/100
[10652.886390] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 11/100
[10652.889407] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 12/100
[10654.842325] wlan0: detected beacon loss from AP - sending probe request
[10667.846018] wlan0: detected beacon loss from AP - sending probe request
[10667.849992] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10668.183919] wlan0: cancelling probereq poll due to a received beacon
[10687.845503] wlan0: detected beacon loss from AP - sending probe request
[10689.845503] wlan0: detected beacon loss from AP - sending probe request
[10689.849412] wlan0: cancelling probereq poll due to a received beacon
[10693.841324] wlan0: detected beacon loss from AP - sending probe request
[10693.844694] wlan0: cancelling probereq poll due to a received beacon
[10701.845984] wlan0: detected beacon loss from AP - sending probe request
[10701.850091] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10701.854280] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10701.973966] wlan0: cancelling probereq poll due to a received beacon
[10718.841112] wlan0: detected beacon loss from AP - sending probe request
[10718.972921] wlan0: cancelling probereq poll due to a received beacon
[10734.840285] wlan0: detected beacon loss from AP - sending probe request
[10739.844200] wlan0: detected beacon loss from AP - sending probe request
[10739.848201] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10739.852389] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10741.840042] wlan0: detected beacon loss from AP - sending probe request
[10742.254027] wlan0: cancelling probereq poll due to a received beacon
[10744.840004] wlan0: detected beacon loss from AP - sending probe request
[10745.251018] wlan0: cancelling probereq poll due to a received beacon
[10748.843855] wlan0: detected beacon loss from AP - sending probe request
[10753.847720] wlan0: detected beacon loss from AP - sending probe request
[10753.851737] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10753.855729] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10753.859751] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10753.863908] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 4/100
[10753.867724] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 5/100
[10753.871718] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 6/100
[10753.875720] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 7/100
[10753.881717] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 8/100
[10753.885716] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 9/100
[10753.889719] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 10/100
[10753.893722] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 11/100
[10753.897736] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 12/100
[10753.903050] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 13/100
[10753.907761] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 14/100
[10753.911730] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 15/100
[10753.915722] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 16/100
[10753.919723] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 17/100
[10753.923721] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 18/100
[10753.927724] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 19/100
[10753.931716] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 20/100
[10753.935724] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 21/100
[10753.939725] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 22/100
[10753.943720] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 23/100
[10753.947720] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 24/100
[10753.951729] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 25/100
[10753.955730] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 26/100
[10753.959170] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 27/100
[10753.963723] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 28/100
[10753.967723] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 29/100
[10753.971719] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 30/100
[10753.975714] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 31/100
[10753.981757] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 32/100
[10753.985719] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 33/100
[10753.989716] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 34/100
[10753.993717] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 35/100
[10753.997717] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 36/100
[10754.001717] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 37/100
[10754.005918] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 38/100
[10754.009728] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 39/100
[10754.013729] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 40/100
[10754.017721] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 41/100
[10754.021940] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 42/100
[10754.024722] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 43/100
[10754.040729] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 44/100
[10754.044737] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 45/100
[10755.841438] wlan0: detected beacon loss from AP - sending probe request
[10755.844678] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10755.848671] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10755.852680] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10755.856673] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 4/100
[10755.860675] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 5/100
[10755.864734] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 6/100
[10755.868678] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 7/100
[10755.872675] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 8/100
[10755.884667] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 9/100
[10755.888667] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 10/100
[10755.892666] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 11/100
[10755.896675] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 12/100
[10755.900671] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 13/100
[10755.904678] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 14/100
[10755.908673] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 15/100
[10755.912680] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 16/100
[10808.842277] wlan0: detected beacon loss from AP - sending probe request
[10808.846496] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10808.850441] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10808.854286] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10808.858281] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 4/100
[10808.862341] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 5/100
[10808.868379] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 6/100
[10808.872345] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 7/100
[10808.876979] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 8/100
[10808.880285] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 9/100
[10808.884328] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 10/100
[10808.888287] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 11/100
[10808.892359] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 12/100
[10808.896317] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 13/100
[10808.900281] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 14/100
[10808.904276] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 15/100
[10808.908272] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 16/100
[10808.912269] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 17/100
[10808.916269] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 18/100
[10808.920269] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 19/100
[10808.924274] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 20/100
[10808.928268] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 21/100
[10808.932270] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 22/100
[10808.936353] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 23/100
[10808.940282] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 24/100
[10808.944279] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 25/100
[10808.947385] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 26/100
[10808.951272] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 27/100
[10808.955325] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 28/100
[10808.961272] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 29/100
[10808.965270] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 30/100
[10808.969270] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 31/100
[10808.973274] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 32/100
[10808.979273] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 33/100
[10808.983268] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 34/100
[10808.987271] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 35/100
[10808.991278] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 36/100
[10808.994030] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 37/100
[10808.997558] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 38/100
[10809.001282] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 39/100
[10809.005282] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 40/100
[10809.010347] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 41/100
[10809.014275] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 42/100
[10809.018414] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 43/100
[10809.024297] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 44/100
[10809.028279] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 45/100
[10809.032275] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 46/100
[10809.036279] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 47/100
[10809.044273] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 48/100
[10809.048270] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 49/100
[10809.054271] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 50/100
[10809.059274] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 51/100
[10809.063270] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 52/100
[10809.079284] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 53/100
[10809.083337] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 54/100
[10809.087278] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 55/100
[10809.093287] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 56/100
[10809.097278] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 57/100
[10809.101279] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 58/100
[10809.105270] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 59/100
[10809.109276] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 60/100
[10810.843314] wlan0: detected beacon loss from AP - sending probe request
[10830.843691] wlan0: detected beacon loss from AP - sending probe request
[10830.849710] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10830.853750] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10830.858029] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 3/100
[10830.863912] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 4/100
[10830.867709] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 5/100
[10830.871967] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 6/100
[10830.875705] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 7/100
[10830.879861] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 8/100
[10830.883832] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 9/100
[10830.887771] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 10/100
[10830.891574] wlan0: cancelling probereq poll due to a received beacon
[10858.841808] wlan0: detected beacon loss from AP - sending probe request
[10858.846613] wlan0: cancelling probereq poll due to a received beacon
[10873.841176] wlan0: detected beacon loss from AP - sending probe request
[10873.897915] wlan0: cancelling probereq poll due to a received beacon
[10972.144740] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 1/100
[10972.147980] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2c:a6:11, try 2/100
[10972.152028] wlan0: moving STA 00:0d:67:2c:a6:11 to state 3
[10972.152034] wlan0: moving STA 00:0d:67:2c:a6:11 to state 2
[10972.152045] wlan0: moving STA 00:0d:67:2c:a6:11 to state 1
[10972.156972] ieee80211 phy0: Removed STA 00:0d:67:2c:a6:11
[10972.157048] ieee80211 phy0: Destroyed STA 00:0d:67:2c:a6:11
[10972.175849] wlan0: authenticate with 00:0d:67:2a:7c:0d
[10972.175861] ieee80211 phy0: Allocated STA 00:0d:67:2a:7c:0d
[10972.184440] ieee80211 phy0: Inserted STA 00:0d:67:2a:7c:0d
[10972.184447] wlan0: send auth to 00:0d:67:2a:7c:0d (try 1/3)
[10972.185312] wlan0: authenticated
[10972.185318] wlan0: moving STA 00:0d:67:2a:7c:0d to state 2
[10972.203167] wlan0: associate with 00:0d:67:2a:7c:0d (try 1/3)
[10972.204669] wlan0: RX AssocResp from 00:0d:67:2a:7c:0d (capab=0x401 status=0 aid=1)
[10972.204676] wlan0: associated
[10972.204704] wlan0: moving STA 00:0d:67:2a:7c:0d to state 3
[10972.204716] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10972.204726] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[10972.204734] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[10972.204742] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[10972.228632] wlan0: moving STA 00:0d:67:2a:7c:0d to state 4
[11211.699055] wlan0: moving STA 00:0d:67:2a:7c:0d to state 3
[11211.699062] wlan0: moving STA 00:0d:67:2a:7c:0d to state 2
[11211.699069] wlan0: moving STA 00:0d:67:2a:7c:0d to state 1
[11211.704855] ieee80211 phy0: Removed STA 00:0d:67:2a:7c:0d
[11211.704932] ieee80211 phy0: Destroyed STA 00:0d:67:2a:7c:0d
[11211.713006] wlan0: authenticate with 00:0d:67:2c:a6:11
[11211.713017] ieee80211 phy0: Allocated STA 00:0d:67:2c:a6:11
[11211.725535] ieee80211 phy0: Inserted STA 00:0d:67:2c:a6:11
[11211.725543] wlan0: direct probe to 00:0d:67:2c:a6:11 (try 1/3)
[11211.925673] wlan0: direct probe to 00:0d:67:2c:a6:11 (try 2/3)
[11212.126658] wlan0: direct probe to 00:0d:67:2c:a6:11 (try 3/3)
[11212.327670] wlan0: authentication with 00:0d:67:2c:a6:11 timed out
[11212.331880] ieee80211 phy0: Removed STA 00:0d:67:2c:a6:11
[11212.331958] ieee80211 phy0: Destroyed STA 00:0d:67:2c:a6:11
[11212.331975] ieee80211 phy0: device now idle
[11212.436375] ieee80211 phy0: device no longer idle - scanning
[11212.536401] wlan0: deauthenticating from 00:0d:67:2a:7c:0d by local choice (reason=2)
[11212.564001] ieee80211 phy0: device now idle
[11212.568894] cfg80211: Calling CRDA to update world regulatory domain
[11212.569633] wlan0: authenticate with 00:0d:67:2a:00:4d
[11212.569658] ieee80211 phy0: Allocated STA 00:0d:67:2a:00:4d
[11212.573896] ieee80211 phy0: device no longer idle - in use
[11212.637907] ieee80211 phy0: Inserted STA 00:0d:67:2a:00:4d
[11212.637916] wlan0: send auth to 00:0d:67:2a:00:4d (try 1/3)
[11212.638967] wlan0: authenticated
[11212.638974] wlan0: moving STA 00:0d:67:2a:00:4d to state 2
[11212.639618] cfg80211: World regulatory domain updated:
[11212.639624] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11212.639630] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11212.639649] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11212.639738] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11212.639743] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11212.639747] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11212.651649] wlan0: associate with 00:0d:67:2a:00:4d (try 1/3)
[11212.653016] wlan0: RX AssocResp from 00:0d:67:2a:00:4d (capab=0x401 status=0 aid=2)
[11212.653023] wlan0: associated
[11212.653050] wlan0: moving STA 00:0d:67:2a:00:4d to state 3
[11212.653061] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[11212.653070] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[11212.653078] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[11212.653085] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[11212.661062] cfg80211: Calling CRDA for country: US
[11212.685544] wlan0: moving STA 00:0d:67:2a:00:4d to state 4
[11212.721834] ath: regdomain 0x8348 updated by CountryIE
[11212.721840] ath: EEPROM regdomain: 0x8348
[11212.721843] ath: EEPROM indicates we should expect a country code
[11212.721847] ath: doing EEPROM country->regdmn map search
[11212.721850] ath: country maps to regdmn code: 0x3a
[11212.721854] ath: Country alpha2 being used: US
[11212.721857] ath: Regpair used: 0x3a
[11212.721900] cfg80211: Regulatory domain changed to country: US
[11212.721903] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11212.721909] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11212.721914] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11212.721919] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11212.721924] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11212.721929] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11212.721933] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11270.826125] wlan0: detected beacon loss from AP - sending probe request
[11270.991231] wlan0: cancelling probereq poll due to a received beacon
[11283.829909] wlan0: detected beacon loss from AP - sending probe request
[11285.132566] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11285.132573] cyapa 7-0067: ======< cyapa_detect >======
[11285.132577] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11285.132581] cyapa 7-0067: ======< cyapa_poll_state >======
[11285.133153] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11285.133157] cyapa 7-0067: smbus: probing with BL_STATUS command
[11285.133996] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11285.134002] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11285.134005] cyapa 7-0067: device state: operational mode
[11285.134009] cyapa 7-0067: ======< cyapa_get_query_data >======
[11285.137349] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11287.831331] wlan0: detected beacon loss from AP - sending probe request
[11295.833556] wlan0: detected beacon loss from AP - sending probe request
[11295.873462] wlan0: cancelling probereq poll due to a received beacon
[11298.833448] wlan0: detected beacon loss from AP - sending probe request
[11310.825077] wlan0: detected beacon loss from AP - sending probe request
[11310.827255] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 1/100
[11310.829099] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 2/100
[11310.831071] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 3/100
[11310.833072] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 4/100
[11310.835077] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 5/100
[11310.837081] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 6/100
[11310.839080] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 7/100
[11310.841132] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 8/100
[11310.843081] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 9/100
[11310.845084] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 10/100
[11310.847427] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 11/100
[11310.851092] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 12/100
[11310.853081] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 13/100
[11310.855078] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 14/100
[11310.857078] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 15/100
[11310.859076] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 16/100
[11310.861074] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 17/100
[11310.863085] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 18/100
[11310.865072] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 19/100
[11310.867088] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 20/100
[11310.870803] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 21/100
[11310.874075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 22/100
[11310.878075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 23/100
[11310.880074] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 24/100
[11310.882072] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 25/100
[11310.884080] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 26/100
[11310.886068] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 27/100
[11310.888076] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 28/100
[11310.890258] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 29/100
[11310.892076] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 30/100
[11310.894066] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 31/100
[11310.896074] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 32/100
[11310.898066] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 33/100
[11310.900072] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 34/100
[11310.902075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 35/100
[11310.904077] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 36/100
[11310.906071] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 37/100
[11310.908082] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 38/100
[11310.910075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 39/100
[11310.912080] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 40/100
[11310.914070] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 41/100
[11310.916074] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 42/100
[11310.918071] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 43/100
[11310.920075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 44/100
[11310.922082] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 45/100
[11310.924320] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 46/100
[11310.929902] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 47/100
[11310.933095] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 48/100
[11310.935081] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 49/100
[11310.938122] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 50/100
[11310.940618] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 51/100
[11310.942077] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 52/100
[11310.944193] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 53/100
[11310.946074] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 54/100
[11310.948119] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 55/100
[11310.950082] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 56/100
[11310.952483] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 57/100
[11310.954077] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 58/100
[11310.956129] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 59/100
[11310.958469] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 60/100
[11310.960071] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 61/100
[11310.962080] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 62/100
[11310.964784] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 63/100
[11310.966110] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 64/100
[11310.968084] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 65/100
[11310.970080] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 66/100
[11310.972082] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 67/100
[11310.974182] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 68/100
[11310.976080] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 69/100
[11310.978077] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 70/100
[11310.980083] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 71/100
[11310.982075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 72/100
[11310.984136] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 73/100
[11310.986273] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 74/100
[11310.988079] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 75/100
[11310.990075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 76/100
[11310.992117] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 77/100
[11310.994070] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 78/100
[11310.998073] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 79/100
[11311.000074] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 80/100
[11311.002069] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 81/100
[11311.004067] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 82/100
[11311.006072] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 83/100
[11311.008276] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 84/100
[11311.010067] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 85/100
[11311.012075] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 86/100
[11311.014070] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 87/100
[11311.016077] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 88/100
[11311.018074] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 89/100
[11311.020073] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 90/100
[11311.022070] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 91/100
[11311.024304] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 92/100
[11311.026071] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 93/100
[11311.028072] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 94/100
[11311.030070] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 95/100
[11311.032073] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 96/100
[11311.034073] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 97/100
[11311.036081] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 98/100
[11311.038073] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, try 99/100
[11311.040080] ieee80211 phy0: wlan0: No ack for nullfunc frame to AP 00:0d:67:2a:00:4d, disconnecting.
[11311.043301] wlan0: moving STA 00:0d:67:2a:00:4d to state 3
[11311.043307] wlan0: moving STA 00:0d:67:2a:00:4d to state 2
[11311.043315] wlan0: moving STA 00:0d:67:2a:00:4d to state 1
[11311.047538] ieee80211 phy0: Removed STA 00:0d:67:2a:00:4d
[11311.047618] ieee80211 phy0: Destroyed STA 00:0d:67:2a:00:4d
[11311.064735] cfg80211: Calling CRDA to update world regulatory domain
[11311.065618] ieee80211 phy0: device now idle
[11311.093634] cfg80211: World regulatory domain updated:
[11311.093640] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11311.093646] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11311.093652] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11311.093656] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11311.093661] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11311.093666] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11311.168233] ieee80211 phy0: device no longer idle - scanning
[11311.322077] ieee80211 phy0: device now idle
[11311.323179] wlan0: authenticate with 00:0d:67:2c:cc:29
[11311.323190] ieee80211 phy0: Allocated STA 00:0d:67:2c:cc:29
[11311.325796] ieee80211 phy0: device no longer idle - in use
[11311.353024] ieee80211 phy0: Inserted STA 00:0d:67:2c:cc:29
[11311.353032] wlan0: direct probe to 00:0d:67:2c:cc:29 (try 1/3)
[11311.554052] wlan0: direct probe to 00:0d:67:2c:cc:29 (try 2/3)
[11311.755077] wlan0: direct probe to 00:0d:67:2c:cc:29 (try 3/3)
[11311.956042] wlan0: authentication with 00:0d:67:2c:cc:29 timed out
[11311.962046] ieee80211 phy0: Removed STA 00:0d:67:2c:cc:29
[11311.962127] ieee80211 phy0: Destroyed STA 00:0d:67:2c:cc:29
[11311.962145] ieee80211 phy0: device now idle
[11312.066210] ieee80211 phy0: device no longer idle - scanning
[11312.154054] ieee80211 phy0: device now idle
[11312.155976] wlan0: authenticate with 00:0d:67:25:71:a5
[11312.155986] ieee80211 phy0: Allocated STA 00:0d:67:25:71:a5
[11312.157172] ieee80211 phy0: device no longer idle - in use
[11312.177880] ieee80211 phy0: Inserted STA 00:0d:67:25:71:a5
[11312.177888] wlan0: direct probe to 00:0d:67:25:71:a5 (try 1/3)
[11312.378039] wlan0: direct probe to 00:0d:67:25:71:a5 (try 2/3)
[11312.579387] wlan0: direct probe to 00:0d:67:25:71:a5 (try 3/3)
[11312.780030] wlan0: authentication with 00:0d:67:25:71:a5 timed out
[11312.784222] ieee80211 phy0: Removed STA 00:0d:67:25:71:a5
[11312.784303] ieee80211 phy0: Destroyed STA 00:0d:67:25:71:a5
[11312.784317] ieee80211 phy0: device now idle
[11312.888685] ieee80211 phy0: device no longer idle - scanning
[11316.788987] wlan0: authenticate with 00:0d:67:25:8d:e1
[11316.789000] ieee80211 phy0: Allocated STA 00:0d:67:25:8d:e1
[11316.809237] ieee80211 phy0: Inserted STA 00:0d:67:25:8d:e1
[11316.809247] wlan0: direct probe to 00:0d:67:25:8d:e1 (try 1/3)
[11317.011672] wlan0: direct probe to 00:0d:67:25:8d:e1 (try 2/3)
[11317.211908] wlan0: direct probe to 00:0d:67:25:8d:e1 (try 3/3)
[11317.412901] wlan0: authentication with 00:0d:67:25:8d:e1 timed out
[11317.416901] ieee80211 phy0: Removed STA 00:0d:67:25:8d:e1
[11317.416980] ieee80211 phy0: Destroyed STA 00:0d:67:25:8d:e1
[11317.416995] ieee80211 phy0: device now idle
[11317.521420] ieee80211 phy0: device no longer idle - scanning
[11320.376017] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11320.376023] cyapa 7-0067: ======< cyapa_detect >======
[11320.376027] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11320.376031] cyapa 7-0067: ======< cyapa_poll_state >======
[11320.376631] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11320.376635] cyapa 7-0067: smbus: probing with BL_STATUS command
[11320.377471] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11320.377476] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11320.377480] cyapa 7-0067: device state: operational mode
[11320.377484] cyapa 7-0067: ======< cyapa_get_query_data >======
[11320.380839] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11321.355515] wlan0: authenticate with 00:0d:67:2c:cc:31
[11321.355529] ieee80211 phy0: Allocated STA 00:0d:67:2c:cc:31
[11321.381753] ieee80211 phy0: Inserted STA 00:0d:67:2c:cc:31
[11321.381761] wlan0: direct probe to 00:0d:67:2c:cc:31 (try 1/3)
[11321.582809] wlan0: direct probe to 00:0d:67:2c:cc:31 (try 2/3)
[11321.783779] wlan0: direct probe to 00:0d:67:2c:cc:31 (try 3/3)
[11325.657223] wlan0: authentication with 00:0d:67:2c:cc:31 timed out
[11325.661808] ieee80211 phy0: Removed STA 00:0d:67:2c:cc:31
[11325.661885] ieee80211 phy0: Destroyed STA 00:0d:67:2c:cc:31
[11325.661900] ieee80211 phy0: device now idle
[11325.766511] ieee80211 phy0: device no longer idle - scanning
[11326.712631] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11326.712647] cyapa 7-0067: ======< cyapa_detect >======
[11326.712651] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11326.712655] cyapa 7-0067: ======< cyapa_poll_state >======
[11326.713224] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11326.713229] cyapa 7-0067: smbus: probing with BL_STATUS command
[11326.714067] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11326.714073] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11326.714077] cyapa 7-0067: device state: operational mode
[11326.714081] cyapa 7-0067: ======< cyapa_get_query_data >======
[11326.717403] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11329.609466] ieee80211 phy0: device now idle
[11329.902017] ieee80211 phy0: device no longer idle - scanning
[11332.530385] ieee80211 phy0: device now idle
[11388.255044] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11388.255051] cyapa 7-0067: ======< cyapa_detect >======
[11388.255055] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11388.255060] cyapa 7-0067: ======< cyapa_poll_state >======
[11388.255658] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11388.255664] cyapa 7-0067: smbus: probing with BL_STATUS command
[11388.256506] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11388.256512] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11388.256516] cyapa 7-0067: device state: operational mode
[11388.256520] cyapa 7-0067: ======< cyapa_get_query_data >======
[11388.259853] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11396.101952] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11396.101959] cyapa 7-0067: ======< cyapa_detect >======
[11396.101963] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11396.101967] cyapa 7-0067: ======< cyapa_poll_state >======
[11396.102548] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11396.102553] cyapa 7-0067: smbus: probing with BL_STATUS command
[11396.103394] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11396.103399] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11396.103403] cyapa 7-0067: device state: operational mode
[11396.103407] cyapa 7-0067: ======< cyapa_get_query_data >======
[11396.106745] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11402.309756] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11402.309763] cyapa 7-0067: ======< cyapa_detect >======
[11402.309767] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11402.309771] cyapa 7-0067: ======< cyapa_poll_state >======
[11402.310347] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11402.310352] cyapa 7-0067: smbus: probing with BL_STATUS command
[11402.311188] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11402.311193] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[11402.311197] cyapa 7-0067: device state: operational mode
[11402.311200] cyapa 7-0067: ======< cyapa_get_query_data >======
[11402.314540] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11559.724633] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11559.724640] cyapa 7-0067: ======< cyapa_detect >======
[11559.724644] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11559.724648] cyapa 7-0067: ======< cyapa_poll_state >======
[11559.725219] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11559.725225] cyapa 7-0067: smbus: probing with BL_STATUS command
[11559.726065] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11559.726071] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[11559.726075] cyapa 7-0067: device state: operational mode
[11559.726079] cyapa 7-0067: ======< cyapa_get_query_data >======
[11559.729418] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11659.622142] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11659.622149] cyapa 7-0067: ======< cyapa_detect >======
[11659.622153] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11659.622157] cyapa 7-0067: ======< cyapa_poll_state >======
[11659.622735] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11659.622740] cyapa 7-0067: smbus: probing with BL_STATUS command
[11659.623582] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11659.623588] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11659.623592] cyapa 7-0067: device state: operational mode
[11659.623595] cyapa 7-0067: ======< cyapa_get_query_data >======
[11659.626938] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11664.510859] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11664.510865] cyapa 7-0067: ======< cyapa_detect >======
[11664.510869] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11664.510873] cyapa 7-0067: ======< cyapa_poll_state >======
[11664.511469] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11664.511473] cyapa 7-0067: smbus: probing with BL_STATUS command
[11664.512311] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11664.512316] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[11664.512320] cyapa 7-0067: device state: operational mode
[11664.512323] cyapa 7-0067: ======< cyapa_get_query_data >======
[11664.515663] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11668.970763] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11668.970769] cyapa 7-0067: ======< cyapa_detect >======
[11668.970773] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11668.970778] cyapa 7-0067: ======< cyapa_poll_state >======
[11668.971351] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11668.971356] cyapa 7-0067: smbus: probing with BL_STATUS command
[11668.972191] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11668.972196] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[11668.972200] cyapa 7-0067: device state: operational mode
[11668.972203] cyapa 7-0067: ======< cyapa_get_query_data >======
[11668.975541] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11733.071075] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11733.071082] cyapa 7-0067: ======< cyapa_detect >======
[11733.071086] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11733.071090] cyapa 7-0067: ======< cyapa_poll_state >======
[11733.071691] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11733.071697] cyapa 7-0067: smbus: probing with BL_STATUS command
[11733.072540] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11733.072546] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11733.072549] cyapa 7-0067: device state: operational mode
[11733.072553] cyapa 7-0067: ======< cyapa_get_query_data >======
[11733.075899] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11776.666045] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11776.666051] cyapa 7-0067: ======< cyapa_detect >======
[11776.666055] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11776.666059] cyapa 7-0067: ======< cyapa_poll_state >======
[11776.666659] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11776.666664] cyapa 7-0067: smbus: probing with BL_STATUS command
[11776.667510] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11776.667516] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[11776.667520] cyapa 7-0067: device state: operational mode
[11776.667524] cyapa 7-0067: ======< cyapa_get_query_data >======
[11776.670879] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11800.924139] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11800.924145] cyapa 7-0067: ======< cyapa_detect >======
[11800.924149] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11800.924154] cyapa 7-0067: ======< cyapa_poll_state >======
[11800.924781] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11800.924786] cyapa 7-0067: smbus: probing with BL_STATUS command
[11800.925629] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11800.925635] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[11800.925639] cyapa 7-0067: device state: operational mode
[11800.925642] cyapa 7-0067: ======< cyapa_get_query_data >======
[11800.928981] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[11844.003045] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[11844.003051] cyapa 7-0067: ======< cyapa_detect >======
[11844.003055] cyapa 7-0067: ======< cyapa_check_is_operational >======
[11844.003059] cyapa 7-0067: ======< cyapa_poll_state >======
[11844.003663] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[11844.003668] cyapa 7-0067: smbus: probing with BL_STATUS command
[11844.004508] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[11844.004513] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[11844.004517] cyapa 7-0067: device state: operational mode
[11844.004521] cyapa 7-0067: ======< cyapa_get_query_data >======
[11844.007860] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12534.398139] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12534.398146] cyapa 7-0067: ======< cyapa_detect >======
[12534.398150] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12534.398154] cyapa 7-0067: ======< cyapa_poll_state >======
[12534.398740] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12534.398746] cyapa 7-0067: smbus: probing with BL_STATUS command
[12534.399587] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12534.399593] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[12534.399597] cyapa 7-0067: device state: operational mode
[12534.399600] cyapa 7-0067: ======< cyapa_get_query_data >======
[12534.402943] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12649.143829] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12649.143836] cyapa 7-0067: ======< cyapa_detect >======
[12649.143840] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12649.143844] cyapa 7-0067: ======< cyapa_poll_state >======
[12649.144440] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12649.144444] cyapa 7-0067: smbus: probing with BL_STATUS command
[12649.145284] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12649.145290] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[12649.145293] cyapa 7-0067: device state: operational mode
[12649.145297] cyapa 7-0067: ======< cyapa_get_query_data >======
[12649.148632] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12684.686946] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12684.686953] cyapa 7-0067: ======< cyapa_detect >======
[12684.686956] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12684.686960] cyapa 7-0067: ======< cyapa_poll_state >======
[12684.687550] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12684.687555] cyapa 7-0067: smbus: probing with BL_STATUS command
[12684.688395] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12684.688401] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[12684.688404] cyapa 7-0067: device state: operational mode
[12684.688408] cyapa 7-0067: ======< cyapa_get_query_data >======
[12684.691749] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12749.064742] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12749.064749] cyapa 7-0067: ======< cyapa_detect >======
[12749.064753] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12749.064757] cyapa 7-0067: ======< cyapa_poll_state >======
[12749.065344] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12749.065350] cyapa 7-0067: smbus: probing with BL_STATUS command
[12749.066193] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12749.066199] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[12749.066203] cyapa 7-0067: device state: operational mode
[12749.066206] cyapa 7-0067: ======< cyapa_get_query_data >======
[12749.069558] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12790.230390] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12790.230397] cyapa 7-0067: ======< cyapa_detect >======
[12790.230401] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12790.230404] cyapa 7-0067: ======< cyapa_poll_state >======
[12790.230987] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12790.230992] cyapa 7-0067: smbus: probing with BL_STATUS command
[12790.231832] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12790.231837] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[12790.231841] cyapa 7-0067: device state: operational mode
[12790.231845] cyapa 7-0067: ======< cyapa_get_query_data >======
[12790.235195] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12836.419023] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12836.419030] cyapa 7-0067: ======< cyapa_detect >======
[12836.419034] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12836.419038] cyapa 7-0067: ======< cyapa_poll_state >======
[12836.419637] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12836.419641] cyapa 7-0067: smbus: probing with BL_STATUS command
[12836.420482] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12836.420487] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[12836.420491] cyapa 7-0067: device state: operational mode
[12836.420495] cyapa 7-0067: ======< cyapa_get_query_data >======
[12836.423834] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12841.326909] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12841.326916] cyapa 7-0067: ======< cyapa_detect >======
[12841.326920] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12841.326924] cyapa 7-0067: ======< cyapa_poll_state >======
[12841.327525] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12841.327530] cyapa 7-0067: smbus: probing with BL_STATUS command
[12841.328377] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12841.328383] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[12841.328386] cyapa 7-0067: device state: operational mode
[12841.328390] cyapa 7-0067: ======< cyapa_get_query_data >======
[12841.331723] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12872.891417] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12872.891424] cyapa 7-0067: ======< cyapa_detect >======
[12872.891428] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12872.891432] cyapa 7-0067: ======< cyapa_poll_state >======
[12872.892005] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12872.892010] cyapa 7-0067: smbus: probing with BL_STATUS command
[12872.892851] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12872.892857] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[12872.892861] cyapa 7-0067: device state: operational mode
[12872.892864] cyapa 7-0067: ======< cyapa_get_query_data >======
[12872.896207] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[12891.833471] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[12891.833494] cyapa 7-0067: ======< cyapa_detect >======
[12891.833498] cyapa 7-0067: ======< cyapa_check_is_operational >======
[12891.833502] cyapa 7-0067: ======< cyapa_poll_state >======
[12891.834081] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[12891.834087] cyapa 7-0067: smbus: probing with BL_STATUS command
[12891.834925] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[12891.834931] cyapa 7-0067: status registers = [0x8f, 0x18, 0x00]
[12891.834935] cyapa 7-0067: device state: operational mode
[12891.834939] cyapa 7-0067: ======< cyapa_get_query_data >======
[12891.838278] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13033.337514] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13033.337520] cyapa 7-0067: ======< cyapa_detect >======
[13033.337524] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13033.337528] cyapa 7-0067: ======< cyapa_poll_state >======
[13033.338118] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13033.338123] cyapa 7-0067: smbus: probing with BL_STATUS command
[13033.338962] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13033.338967] cyapa 7-0067: status registers = [0x8f, 0x28, 0x11]
[13033.338971] cyapa 7-0067: device state: operational mode
[13033.338975] cyapa 7-0067: ======< cyapa_get_query_data >======
[13033.342310] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13147.511445] PM: Syncing filesystems ... done.
[13147.715198] PM: Preparing system for mem sleep
[13148.001763] Freezing user space processes ... (elapsed 0.01 seconds) done.
[13148.012901] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[13148.023849] PM: Entering mem sleep
[13148.023864] Suspending console(s) (use no_console_suspend to debug)
[13148.036032] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13148.145922] sd 0:0:0:0: [sda] Stopping disk
[13148.405785] PM: suspend of devices complete after 381.811 msecs
[13148.405868] PM: late suspend of devices complete after 0.076 msecs
[13148.417014] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[13148.428060] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[13148.438880] PM: noirq suspend of devices complete after 33.002 msecs
[13148.439207] ACPI: Preparing to enter system sleep state S3
[13148.439289] PM: Saving platform NVS memory
[13148.439292] Disabling non-boot CPUs ...
[13148.441065] CPU 1 is now offline
[13148.442976] Disabling VMX on cpu 0
[13148.442982] TSC at resume: 418499915
[13148.442984] ACPI: Low-level resume complete
[13148.443041] PM: Restoring platform NVS memory
[13148.443541] Enabling non-boot CPUs ...
[13148.443635] Booting Node 0 Processor 1 APIC 0x2
[13148.453975] Initializing CPU#1
[13148.453984] Disabling VMX on cpu 1
[13148.457416] CPU1 is up
[13148.459281] ACPI: Waking up from system sleep state S3
[13148.460793] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[13148.461165] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[13148.461645] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[13148.462060] PM: noirq resume of devices complete after 1.430 msecs
[13148.462155] PM: early resume of devices complete after 0.060 msecs
[13148.462197] i915 0000:00:02.0: setting latency timer to 64
[13148.462267] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[13148.462372] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[13148.462490] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[13148.462540] ahci 0000:00:1f.2: setting latency timer to 64
[13148.462586] ath: phy0: ASPM enabled: 0x43
[13148.463052] sd 0:0:0:0: [sda] Starting disk
[13148.603132] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[13148.604553] CPU1: Package power limit notification (total events = 15)
[13148.604558] CPU0: Package power limit notification (total events = 15)
[13148.604630] CPU0: Package power limit normal
[13148.604661] CPU1: Package power limit normal
[13148.693596] usb 1-1.3: reset high-speed USB device number 4 using ehci_hcd
[13148.854665] usb 1-1.1: reset full-speed USB device number 9 using ehci_hcd
[13148.939764] usb 1-1.1: device firmware changed
[13149.022182] PM: resume of devices complete after 560.034 msecs
[13149.022534] PM: Finishing wakeup.
[13149.022537] Restarting tasks ... 
[13149.033887] usb 1-1.1: USB disconnect, device number 9
[13149.049475] done.
[13149.049486] video LNXVIDEO:00: Restoring backlight state
[13149.111585] usb 1-1.1: new full-speed USB device number 10 using ehci_hcd
[13149.201071] usb 1-1.1: string descriptor 0 read error: -22
[13149.201094] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
[13149.201101] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13149.488120] usb 1-1.1: USB disconnect, device number 10
[13149.667635] usb 1-1.1: new full-speed USB device number 11 using ehci_hcd
[13149.754435] usb 1-1.1: string descriptor 0 read error: -22
[13149.754460] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
[13149.754467] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13151.029376] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[13151.034147] ata1.00: configured for UDMA/133
[13151.331688] cpufreq_interactive: monitoring input on AT Translated Set 2 keyboard
[13151.331727] cpufreq_interactive: monitoring input on Cypress APA Trackpad (cyapa)
[13707.643696] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13707.643715] cyapa 7-0067: ======< cyapa_detect >======
[13707.643719] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13707.643723] cyapa 7-0067: ======< cyapa_poll_state >======
[13707.644320] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13707.644324] cyapa 7-0067: smbus: probing with BL_STATUS command
[13707.645164] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13707.645170] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[13707.645173] cyapa 7-0067: device state: operational mode
[13707.645177] cyapa 7-0067: ======< cyapa_get_query_data >======
[13707.648519] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13713.094097] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13713.100848] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[13713.100862] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[13713.100874] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[13713.664480] ADDRCONF(NETDEV_UP): eth0: link is not ready
[13713.700647] ieee80211 phy0: device no longer idle - scanning
[13717.572478] ieee80211 phy0: device now idle
[13718.286443] ieee80211 phy0: device no longer idle - scanning
[13721.742951] wlan0: authenticate with 08:ea:44:3d:dd:29
[13721.742964] ieee80211 phy0: Allocated STA 08:ea:44:3d:dd:29
[13721.750965] ieee80211 phy0: Inserted STA 08:ea:44:3d:dd:29
[13721.750972] wlan0: send auth to 08:ea:44:3d:dd:29 (try 1/3)
[13721.752594] wlan0: authenticated
[13721.752602] wlan0: moving STA 08:ea:44:3d:dd:29 to state 2
[13721.762542] wlan0: associate with 08:ea:44:3d:dd:29 (try 1/3)
[13721.771350] wlan0: RX AssocResp from 08:ea:44:3d:dd:29 (capab=0x411 status=0 aid=1)
[13721.771358] wlan0: associated
[13721.771389] wlan0: moving STA 08:ea:44:3d:dd:29 to state 3
[13721.771401] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[13721.771413] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[13721.771420] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[13721.771428] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[13721.785554] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[13721.786013] cfg80211: Calling CRDA for country: US
[13721.787370] wlan0: dropped frame to 08:ea:44:3d:dd:29 (unauthorized port)
[13721.837831] wlan0: moving STA 08:ea:44:3d:dd:29 to state 4
[13721.854298] ath: regdomain 0x8348 updated by CountryIE
[13721.854304] ath: EEPROM regdomain: 0x8348
[13721.854307] ath: EEPROM indicates we should expect a country code
[13721.854311] ath: doing EEPROM country->regdmn map search
[13721.854314] ath: country maps to regdmn code: 0x3a
[13721.854318] ath: Country alpha2 being used: US
[13721.854321] ath: Regpair used: 0x3a
[13721.854384] cfg80211: Regulatory domain changed to country: US
[13721.854387] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13721.854393] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[13721.854399] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[13721.854403] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13721.854408] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13721.854413] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13721.854418] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[13732.437063] wlan0: no IPv6 routers present
[13742.438747] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13742.438753] cyapa 7-0067: ======< cyapa_detect >======
[13742.438757] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13742.438761] cyapa 7-0067: ======< cyapa_poll_state >======
[13742.439345] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13742.439350] cyapa 7-0067: smbus: probing with BL_STATUS command
[13742.440202] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13742.440208] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[13742.440212] cyapa 7-0067: device state: operational mode
[13742.440216] cyapa 7-0067: ======< cyapa_get_query_data >======
[13742.443586] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13747.174647] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13747.174654] cyapa 7-0067: ======< cyapa_detect >======
[13747.174658] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13747.174677] cyapa 7-0067: ======< cyapa_poll_state >======
[13747.175276] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13747.175282] cyapa 7-0067: smbus: probing with BL_STATUS command
[13747.176123] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13747.176129] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[13747.176133] cyapa 7-0067: device state: operational mode
[13747.176137] cyapa 7-0067: ======< cyapa_get_query_data >======
[13747.179471] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13775.867765] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13775.867772] cyapa 7-0067: ======< cyapa_detect >======
[13775.867776] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13775.867780] cyapa 7-0067: ======< cyapa_poll_state >======
[13775.868361] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13775.868366] cyapa 7-0067: smbus: probing with BL_STATUS command
[13775.869205] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13775.869210] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[13775.869214] cyapa 7-0067: device state: operational mode
[13775.869218] cyapa 7-0067: ======< cyapa_get_query_data >======
[13775.872556] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13779.835105] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit
[13842.907144] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13842.907164] cyapa 7-0067: ======< cyapa_detect >======
[13842.907169] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13842.907173] cyapa 7-0067: ======< cyapa_poll_state >======
[13842.907767] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13842.907772] cyapa 7-0067: smbus: probing with BL_STATUS command
[13842.908614] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13842.908620] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[13842.908624] cyapa 7-0067: device state: operational mode
[13842.908628] cyapa 7-0067: ======< cyapa_get_query_data >======
[13842.911973] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13857.603592] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13857.603599] cyapa 7-0067: ======< cyapa_detect >======
[13857.603603] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13857.603607] cyapa 7-0067: ======< cyapa_poll_state >======
[13857.604190] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13857.604196] cyapa 7-0067: smbus: probing with BL_STATUS command
[13857.605075] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13857.605080] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[13857.605084] cyapa 7-0067: device state: operational mode
[13857.605088] cyapa 7-0067: ======< cyapa_get_query_data >======
[13857.608438] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[13955.231132] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[13955.231140] cyapa 7-0067: ======< cyapa_detect >======
[13955.231144] cyapa 7-0067: ======< cyapa_check_is_operational >======
[13955.231148] cyapa 7-0067: ======< cyapa_poll_state >======
[13955.231731] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[13955.231736] cyapa 7-0067: smbus: probing with BL_STATUS command
[13955.232577] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[13955.232583] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[13955.232587] cyapa 7-0067: device state: operational mode
[13955.232590] cyapa 7-0067: ======< cyapa_get_query_data >======
[13955.235925] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14102.938102] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14102.938109] cyapa 7-0067: ======< cyapa_detect >======
[14102.938113] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14102.938117] cyapa 7-0067: ======< cyapa_poll_state >======
[14102.938691] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14102.938697] cyapa 7-0067: smbus: probing with BL_STATUS command
[14102.939536] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14102.939543] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[14102.939547] cyapa 7-0067: device state: operational mode
[14102.939550] cyapa 7-0067: ======< cyapa_get_query_data >======
[14102.942887] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14110.921237] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14110.921243] cyapa 7-0067: ======< cyapa_detect >======
[14110.921247] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14110.921252] cyapa 7-0067: ======< cyapa_poll_state >======
[14110.921831] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14110.921836] cyapa 7-0067: smbus: probing with BL_STATUS command
[14110.922675] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14110.922681] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[14110.922685] cyapa 7-0067: device state: operational mode
[14110.922689] cyapa 7-0067: ======< cyapa_get_query_data >======
[14110.926038] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14244.724569] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14244.724575] cyapa 7-0067: ======< cyapa_detect >======
[14244.724588] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14244.724592] cyapa 7-0067: ======< cyapa_poll_state >======
[14244.725176] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14244.725181] cyapa 7-0067: smbus: probing with BL_STATUS command
[14244.726016] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14244.726021] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[14244.726024] cyapa 7-0067: device state: operational mode
[14244.726028] cyapa 7-0067: ======< cyapa_get_query_data >======
[14244.729375] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14425.834932] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14425.834940] cyapa 7-0067: ======< cyapa_detect >======
[14425.834944] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14425.834948] cyapa 7-0067: ======< cyapa_poll_state >======
[14425.835535] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14425.835541] cyapa 7-0067: smbus: probing with BL_STATUS command
[14425.836383] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14425.836389] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[14425.836393] cyapa 7-0067: device state: operational mode
[14425.836397] cyapa 7-0067: ======< cyapa_get_query_data >======
[14425.839732] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14436.858727] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14436.858734] cyapa 7-0067: ======< cyapa_detect >======
[14436.858738] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14436.858741] cyapa 7-0067: ======< cyapa_poll_state >======
[14436.859326] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14436.859332] cyapa 7-0067: smbus: probing with BL_STATUS command
[14436.860173] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14436.860180] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[14436.860184] cyapa 7-0067: device state: operational mode
[14436.860187] cyapa 7-0067: ======< cyapa_get_query_data >======
[14436.863521] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14441.061405] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14441.061412] cyapa 7-0067: ======< cyapa_detect >======
[14441.061432] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14441.061436] cyapa 7-0067: ======< cyapa_poll_state >======
[14441.062027] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14441.062032] cyapa 7-0067: smbus: probing with BL_STATUS command
[14441.062874] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14441.062879] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[14441.062883] cyapa 7-0067: device state: operational mode
[14441.062887] cyapa 7-0067: ======< cyapa_get_query_data >======
[14441.066223] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14802.082916] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14802.082937] cyapa 7-0067: ======< cyapa_detect >======
[14802.082941] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14802.082945] cyapa 7-0067: ======< cyapa_poll_state >======
[14802.083543] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14802.083548] cyapa 7-0067: smbus: probing with BL_STATUS command
[14802.084384] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14802.084390] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[14802.084394] cyapa 7-0067: device state: operational mode
[14802.084397] cyapa 7-0067: ======< cyapa_get_query_data >======
[14802.087736] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[14808.424739] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[14808.424746] cyapa 7-0067: ======< cyapa_detect >======
[14808.424750] cyapa 7-0067: ======< cyapa_check_is_operational >======
[14808.424765] cyapa 7-0067: ======< cyapa_poll_state >======
[14808.425357] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[14808.425362] cyapa 7-0067: smbus: probing with BL_STATUS command
[14808.426202] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[14808.426208] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[14808.426211] cyapa 7-0067: device state: operational mode
[14808.426215] cyapa 7-0067: ======< cyapa_get_query_data >======
[14808.429567] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15199.456579] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15199.456585] cyapa 7-0067: ======< cyapa_detect >======
[15199.456589] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15199.456594] cyapa 7-0067: ======< cyapa_poll_state >======
[15199.457196] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15199.457201] cyapa 7-0067: smbus: probing with BL_STATUS command
[15199.458045] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15199.458051] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15199.458055] cyapa 7-0067: device state: operational mode
[15199.458059] cyapa 7-0067: ======< cyapa_get_query_data >======
[15199.461406] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15455.049019] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15455.049026] cyapa 7-0067: ======< cyapa_detect >======
[15455.049030] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15455.049034] cyapa 7-0067: ======< cyapa_poll_state >======
[15455.049620] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15455.049625] cyapa 7-0067: smbus: probing with BL_STATUS command
[15455.050464] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15455.050469] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15455.050473] cyapa 7-0067: device state: operational mode
[15455.050476] cyapa 7-0067: ======< cyapa_get_query_data >======
[15455.053831] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15472.028117] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15472.028123] cyapa 7-0067: ======< cyapa_detect >======
[15472.028128] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15472.028132] cyapa 7-0067: ======< cyapa_poll_state >======
[15472.028715] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15472.028721] cyapa 7-0067: smbus: probing with BL_STATUS command
[15472.029559] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15472.029564] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15472.029568] cyapa 7-0067: device state: operational mode
[15472.029572] cyapa 7-0067: ======< cyapa_get_query_data >======
[15472.032912] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15491.548759] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15491.548765] cyapa 7-0067: ======< cyapa_detect >======
[15491.548769] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15491.548773] cyapa 7-0067: ======< cyapa_poll_state >======
[15491.549412] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15491.549417] cyapa 7-0067: smbus: probing with BL_STATUS command
[15491.550257] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15491.550263] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[15491.550266] cyapa 7-0067: device state: operational mode
[15491.550270] cyapa 7-0067: ======< cyapa_get_query_data >======
[15491.553604] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15521.727988] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15521.728008] cyapa 7-0067: ======< cyapa_detect >======
[15521.728012] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15521.728016] cyapa 7-0067: ======< cyapa_poll_state >======
[15521.728628] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15521.728633] cyapa 7-0067: smbus: probing with BL_STATUS command
[15521.729478] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15521.729484] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[15521.729488] cyapa 7-0067: device state: operational mode
[15521.729492] cyapa 7-0067: ======< cyapa_get_query_data >======
[15521.732823] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15592.843248] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15592.843255] cyapa 7-0067: ======< cyapa_detect >======
[15592.843259] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15592.843263] cyapa 7-0067: ======< cyapa_poll_state >======
[15592.843858] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15592.843863] cyapa 7-0067: smbus: probing with BL_STATUS command
[15592.844700] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15592.844706] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15592.844709] cyapa 7-0067: device state: operational mode
[15592.844713] cyapa 7-0067: ======< cyapa_get_query_data >======
[15592.848046] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15624.239317] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15624.239324] cyapa 7-0067: ======< cyapa_detect >======
[15624.239329] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15624.239332] cyapa 7-0067: ======< cyapa_poll_state >======
[15624.239922] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15624.239927] cyapa 7-0067: smbus: probing with BL_STATUS command
[15624.240768] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15624.240773] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15624.240776] cyapa 7-0067: device state: operational mode
[15624.240780] cyapa 7-0067: ======< cyapa_get_query_data >======
[15624.244119] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15633.883162] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15633.883169] cyapa 7-0067: ======< cyapa_detect >======
[15633.883173] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15633.883177] cyapa 7-0067: ======< cyapa_poll_state >======
[15633.883776] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15633.883781] cyapa 7-0067: smbus: probing with BL_STATUS command
[15633.884620] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15633.884626] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15633.884630] cyapa 7-0067: device state: operational mode
[15633.884633] cyapa 7-0067: ======< cyapa_get_query_data >======
[15633.887974] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15680.984809] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15680.984829] cyapa 7-0067: ======< cyapa_detect >======
[15680.984836] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15680.984846] cyapa 7-0067: ======< cyapa_poll_state >======
[15680.985425] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15680.985430] cyapa 7-0067: smbus: probing with BL_STATUS command
[15680.986262] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15680.986267] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15680.986271] cyapa 7-0067: device state: operational mode
[15680.986275] cyapa 7-0067: ======< cyapa_get_query_data >======
[15680.989620] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15687.626912] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15687.626918] cyapa 7-0067: ======< cyapa_detect >======
[15687.626922] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15687.626926] cyapa 7-0067: ======< cyapa_poll_state >======
[15687.627515] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15687.627519] cyapa 7-0067: smbus: probing with BL_STATUS command
[15687.628361] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15687.628367] cyapa 7-0067: status registers = [0x8f, 0x18, 0x01]
[15687.628371] cyapa 7-0067: device state: operational mode
[15687.628374] cyapa 7-0067: ======< cyapa_get_query_data >======
[15687.631715] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15694.834553] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15694.834560] cyapa 7-0067: ======< cyapa_detect >======
[15694.834564] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15694.834568] cyapa 7-0067: ======< cyapa_poll_state >======
[15694.835156] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15694.835161] cyapa 7-0067: smbus: probing with BL_STATUS command
[15694.835999] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15694.836005] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15694.836009] cyapa 7-0067: device state: operational mode
[15694.836012] cyapa 7-0067: ======< cyapa_get_query_data >======
[15694.839350] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15706.056978] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15706.056984] cyapa 7-0067: ======< cyapa_detect >======
[15706.056988] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15706.056992] cyapa 7-0067: ======< cyapa_poll_state >======
[15706.057563] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15706.057567] cyapa 7-0067: smbus: probing with BL_STATUS command
[15706.058404] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15706.058409] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[15706.058412] cyapa 7-0067: device state: operational mode
[15706.058416] cyapa 7-0067: ======< cyapa_get_query_data >======
[15706.061752] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15734.768606] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15734.768613] cyapa 7-0067: ======< cyapa_detect >======
[15734.768617] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15734.768621] cyapa 7-0067: ======< cyapa_poll_state >======
[15734.769211] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15734.769216] cyapa 7-0067: smbus: probing with BL_STATUS command
[15734.770055] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15734.770060] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15734.770063] cyapa 7-0067: device state: operational mode
[15734.770068] cyapa 7-0067: ======< cyapa_get_query_data >======
[15734.773414] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15781.694362] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15781.694368] cyapa 7-0067: ======< cyapa_detect >======
[15781.694372] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15781.694376] cyapa 7-0067: ======< cyapa_poll_state >======
[15781.694955] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15781.694960] cyapa 7-0067: smbus: probing with BL_STATUS command
[15781.695807] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15781.695813] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15781.695816] cyapa 7-0067: device state: operational mode
[15781.695820] cyapa 7-0067: ======< cyapa_get_query_data >======
[15781.699151] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[15801.483637] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[15801.483654] cyapa 7-0067: ======< cyapa_detect >======
[15801.483658] cyapa 7-0067: ======< cyapa_check_is_operational >======
[15801.483662] cyapa 7-0067: ======< cyapa_poll_state >======
[15801.484244] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[15801.484249] cyapa 7-0067: smbus: probing with BL_STATUS command
[15801.485089] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[15801.485094] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[15801.485097] cyapa 7-0067: device state: operational mode
[15801.485101] cyapa 7-0067: ======< cyapa_get_query_data >======
[15801.488440] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16042.528274] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16042.528281] cyapa 7-0067: ======< cyapa_detect >======
[16042.528285] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16042.528289] cyapa 7-0067: ======< cyapa_poll_state >======
[16042.528887] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16042.528892] cyapa 7-0067: smbus: probing with BL_STATUS command
[16042.529730] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16042.529735] cyapa 7-0067: status registers = [0x8f, 0x18, 0x21]
[16042.529739] cyapa 7-0067: device state: operational mode
[16042.529742] cyapa 7-0067: ======< cyapa_get_query_data >======
[16042.533078] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16059.256975] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16059.256981] cyapa 7-0067: ======< cyapa_detect >======
[16059.256985] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16059.256989] cyapa 7-0067: ======< cyapa_poll_state >======
[16059.257583] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16059.257587] cyapa 7-0067: smbus: probing with BL_STATUS command
[16059.258572] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16059.258577] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[16059.258581] cyapa 7-0067: device state: operational mode
[16059.258585] cyapa 7-0067: ======< cyapa_get_query_data >======
[16059.261948] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16123.779253] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16123.779259] cyapa 7-0067: ======< cyapa_detect >======
[16123.779263] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16123.779268] cyapa 7-0067: ======< cyapa_poll_state >======
[16123.779844] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16123.779850] cyapa 7-0067: smbus: probing with BL_STATUS command
[16123.780691] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16123.780698] cyapa 7-0067: status registers = [0x8f, 0x18, 0x00]
[16123.780701] cyapa 7-0067: device state: operational mode
[16123.780705] cyapa 7-0067: ======< cyapa_get_query_data >======
[16123.784044] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16183.096718] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16183.096725] cyapa 7-0067: ======< cyapa_detect >======
[16183.096728] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16183.096732] cyapa 7-0067: ======< cyapa_poll_state >======
[16183.097317] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16183.097322] cyapa 7-0067: smbus: probing with BL_STATUS command
[16183.098160] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16183.098165] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[16183.098168] cyapa 7-0067: device state: operational mode
[16183.098172] cyapa 7-0067: ======< cyapa_get_query_data >======
[16183.101509] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16229.636359] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16229.636366] cyapa 7-0067: ======< cyapa_detect >======
[16229.636370] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16229.636373] cyapa 7-0067: ======< cyapa_poll_state >======
[16229.636985] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16229.636990] cyapa 7-0067: smbus: probing with BL_STATUS command
[16229.637829] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16229.637834] cyapa 7-0067: status registers = [0x8f, 0x18, 0x00]
[16229.637838] cyapa 7-0067: device state: operational mode
[16229.637842] cyapa 7-0067: ======< cyapa_get_query_data >======
[16229.641175] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16277.295128] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16277.295149] cyapa 7-0067: ======< cyapa_detect >======
[16277.295153] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16277.295157] cyapa 7-0067: ======< cyapa_poll_state >======
[16277.295734] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16277.295739] cyapa 7-0067: smbus: probing with BL_STATUS command
[16277.296580] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16277.296587] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[16277.296591] cyapa 7-0067: device state: operational mode
[16277.296595] cyapa 7-0067: ======< cyapa_get_query_data >======
[16277.299927] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16286.306100] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16286.306107] cyapa 7-0067: ======< cyapa_detect >======
[16286.306111] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16286.306115] cyapa 7-0067: ======< cyapa_poll_state >======
[16286.306694] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16286.306698] cyapa 7-0067: smbus: probing with BL_STATUS command
[16286.307544] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16286.307549] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[16286.307553] cyapa 7-0067: device state: operational mode
[16286.307557] cyapa 7-0067: ======< cyapa_get_query_data >======
[16286.310906] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16302.418562] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16302.418569] cyapa 7-0067: ======< cyapa_detect >======
[16302.418573] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16302.418578] cyapa 7-0067: ======< cyapa_poll_state >======
[16302.419177] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16302.419183] cyapa 7-0067: smbus: probing with BL_STATUS command
[16302.420024] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16302.420030] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[16302.420034] cyapa 7-0067: device state: operational mode
[16302.420037] cyapa 7-0067: ======< cyapa_get_query_data >======
[16302.423373] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16318.226178] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16318.226185] cyapa 7-0067: ======< cyapa_detect >======
[16318.226189] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16318.226193] cyapa 7-0067: ======< cyapa_poll_state >======
[16318.226767] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16318.226772] cyapa 7-0067: smbus: probing with BL_STATUS command
[16318.227620] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16318.227626] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[16318.227630] cyapa 7-0067: device state: operational mode
[16318.227634] cyapa 7-0067: ======< cyapa_get_query_data >======
[16318.230972] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16358.279860] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16358.279867] cyapa 7-0067: ======< cyapa_detect >======
[16358.279871] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16358.279875] cyapa 7-0067: ======< cyapa_poll_state >======
[16358.280461] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16358.280467] cyapa 7-0067: smbus: probing with BL_STATUS command
[16358.281308] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16358.281314] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[16358.281317] cyapa 7-0067: device state: operational mode
[16358.281321] cyapa 7-0067: ======< cyapa_get_query_data >======
[16358.284667] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16601.225841] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16601.225848] cyapa 7-0067: ======< cyapa_detect >======
[16601.225852] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16601.225856] cyapa 7-0067: ======< cyapa_poll_state >======
[16601.226440] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16601.226445] cyapa 7-0067: smbus: probing with BL_STATUS command
[16601.227288] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16601.227294] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[16601.227298] cyapa 7-0067: device state: operational mode
[16601.227301] cyapa 7-0067: ======< cyapa_get_query_data >======
[16601.230651] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[16971.236894] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[16971.236900] cyapa 7-0067: ======< cyapa_detect >======
[16971.236904] cyapa 7-0067: ======< cyapa_check_is_operational >======
[16971.236908] cyapa 7-0067: ======< cyapa_poll_state >======
[16971.237485] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[16971.237490] cyapa 7-0067: smbus: probing with BL_STATUS command
[16971.238326] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[16971.238332] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[16971.238335] cyapa 7-0067: device state: operational mode
[16971.238339] cyapa 7-0067: ======< cyapa_get_query_data >======
[16971.241683] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17086.136128] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17086.136135] cyapa 7-0067: ======< cyapa_detect >======
[17086.136139] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17086.136144] cyapa 7-0067: ======< cyapa_poll_state >======
[17086.136718] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17086.136724] cyapa 7-0067: smbus: probing with BL_STATUS command
[17086.137562] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17086.137568] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[17086.137572] cyapa 7-0067: device state: operational mode
[17086.137576] cyapa 7-0067: ======< cyapa_get_query_data >======
[17086.140935] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17173.280574] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17173.280581] cyapa 7-0067: ======< cyapa_detect >======
[17173.280584] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17173.280588] cyapa 7-0067: ======< cyapa_poll_state >======
[17173.281182] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17173.281187] cyapa 7-0067: smbus: probing with BL_STATUS command
[17173.282023] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17173.282028] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17173.282032] cyapa 7-0067: device state: operational mode
[17173.282035] cyapa 7-0067: ======< cyapa_get_query_data >======
[17173.285366] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17234.725667] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17234.725674] cyapa 7-0067: ======< cyapa_detect >======
[17234.725678] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17234.725682] cyapa 7-0067: ======< cyapa_poll_state >======
[17234.726252] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17234.726257] cyapa 7-0067: smbus: probing with BL_STATUS command
[17234.727098] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17234.727104] cyapa 7-0067: status registers = [0x8f, 0x18, 0x31]
[17234.727108] cyapa 7-0067: device state: operational mode
[17234.727112] cyapa 7-0067: ======< cyapa_get_query_data >======
[17234.730460] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17249.379684] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17249.379691] cyapa 7-0067: ======< cyapa_detect >======
[17249.379695] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17249.379699] cyapa 7-0067: ======< cyapa_poll_state >======
[17249.380273] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17249.380278] cyapa 7-0067: smbus: probing with BL_STATUS command
[17249.381121] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17249.381126] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17249.381130] cyapa 7-0067: device state: operational mode
[17249.381134] cyapa 7-0067: ======< cyapa_get_query_data >======
[17249.384458] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17264.510532] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17264.510539] cyapa 7-0067: ======< cyapa_detect >======
[17264.510543] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17264.510547] cyapa 7-0067: ======< cyapa_poll_state >======
[17264.511130] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17264.511135] cyapa 7-0067: smbus: probing with BL_STATUS command
[17264.511986] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17264.511992] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17264.511995] cyapa 7-0067: device state: operational mode
[17264.511999] cyapa 7-0067: ======< cyapa_get_query_data >======
[17264.515339] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17274.346771] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17274.346778] cyapa 7-0067: ======< cyapa_detect >======
[17274.346782] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17274.346786] cyapa 7-0067: ======< cyapa_poll_state >======
[17274.347366] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17274.347371] cyapa 7-0067: smbus: probing with BL_STATUS command
[17274.348206] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17274.348211] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17274.348215] cyapa 7-0067: device state: operational mode
[17274.348218] cyapa 7-0067: ======< cyapa_get_query_data >======
[17274.351556] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17302.299280] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17302.299287] cyapa 7-0067: ======< cyapa_detect >======
[17302.299291] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17302.299295] cyapa 7-0067: ======< cyapa_poll_state >======
[17302.299872] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17302.299878] cyapa 7-0067: smbus: probing with BL_STATUS command
[17302.300718] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17302.300724] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17302.300728] cyapa 7-0067: device state: operational mode
[17302.300731] cyapa 7-0067: ======< cyapa_get_query_data >======
[17302.304069] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17337.029467] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17337.029474] cyapa 7-0067: ======< cyapa_detect >======
[17337.029477] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17337.029481] cyapa 7-0067: ======< cyapa_poll_state >======
[17337.030062] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17337.030066] cyapa 7-0067: smbus: probing with BL_STATUS command
[17337.030906] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17337.030911] cyapa 7-0067: status registers = [0x8f, 0x18, 0x30]
[17337.030914] cyapa 7-0067: device state: operational mode
[17337.030918] cyapa 7-0067: ======< cyapa_get_query_data >======
[17337.034259] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17368.996234] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17368.996241] cyapa 7-0067: ======< cyapa_detect >======
[17368.996245] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17368.996249] cyapa 7-0067: ======< cyapa_poll_state >======
[17368.996828] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17368.996833] cyapa 7-0067: smbus: probing with BL_STATUS command
[17368.997668] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17368.997673] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[17368.997677] cyapa 7-0067: device state: operational mode
[17368.997680] cyapa 7-0067: ======< cyapa_get_query_data >======
[17369.001019] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17375.667560] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17375.667566] cyapa 7-0067: ======< cyapa_detect >======
[17375.667570] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17375.667574] cyapa 7-0067: ======< cyapa_poll_state >======
[17375.668163] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17375.668173] cyapa 7-0067: smbus: probing with BL_STATUS command
[17375.669019] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17375.669025] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17375.669029] cyapa 7-0067: device state: operational mode
[17375.669033] cyapa 7-0067: ======< cyapa_get_query_data >======
[17375.672368] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17420.700079] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17420.700085] cyapa 7-0067: ======< cyapa_detect >======
[17420.700089] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17420.700093] cyapa 7-0067: ======< cyapa_poll_state >======
[17420.700688] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17420.700694] cyapa 7-0067: smbus: probing with BL_STATUS command
[17420.701533] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17420.701539] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[17420.701542] cyapa 7-0067: device state: operational mode
[17420.701546] cyapa 7-0067: ======< cyapa_get_query_data >======
[17420.704894] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17429.326624] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17429.326631] cyapa 7-0067: ======< cyapa_detect >======
[17429.326635] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17429.326639] cyapa 7-0067: ======< cyapa_poll_state >======
[17429.327207] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17429.327211] cyapa 7-0067: smbus: probing with BL_STATUS command
[17429.328050] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17429.328055] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17429.328058] cyapa 7-0067: device state: operational mode
[17429.328062] cyapa 7-0067: ======< cyapa_get_query_data >======
[17429.331392] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17459.205136] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17459.205143] cyapa 7-0067: ======< cyapa_detect >======
[17459.205146] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17459.205150] cyapa 7-0067: ======< cyapa_poll_state >======
[17459.205734] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17459.205739] cyapa 7-0067: smbus: probing with BL_STATUS command
[17459.206579] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17459.206584] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17459.206588] cyapa 7-0067: device state: operational mode
[17459.206592] cyapa 7-0067: ======< cyapa_get_query_data >======
[17459.209929] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17530.703146] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17530.703152] cyapa 7-0067: ======< cyapa_detect >======
[17530.703156] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17530.703160] cyapa 7-0067: ======< cyapa_poll_state >======
[17530.703753] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17530.703758] cyapa 7-0067: smbus: probing with BL_STATUS command
[17530.704607] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17530.704612] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17530.704616] cyapa 7-0067: device state: operational mode
[17530.704620] cyapa 7-0067: ======< cyapa_get_query_data >======
[17530.707951] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17877.729171] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17877.729178] cyapa 7-0067: ======< cyapa_detect >======
[17877.729183] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17877.729187] cyapa 7-0067: ======< cyapa_poll_state >======
[17877.729780] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17877.729786] cyapa 7-0067: smbus: probing with BL_STATUS command
[17877.730631] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17877.730638] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17877.730641] cyapa 7-0067: device state: operational mode
[17877.730645] cyapa 7-0067: ======< cyapa_get_query_data >======
[17877.733976] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17918.946937] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17918.946944] cyapa 7-0067: ======< cyapa_detect >======
[17918.946948] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17918.946963] cyapa 7-0067: ======< cyapa_poll_state >======
[17918.947566] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17918.947571] cyapa 7-0067: smbus: probing with BL_STATUS command
[17918.948407] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17918.948412] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[17918.948416] cyapa 7-0067: device state: operational mode
[17918.948419] cyapa 7-0067: ======< cyapa_get_query_data >======
[17918.951751] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[17939.671508] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[17939.671514] cyapa 7-0067: ======< cyapa_detect >======
[17939.671518] cyapa 7-0067: ======< cyapa_check_is_operational >======
[17939.671523] cyapa 7-0067: ======< cyapa_poll_state >======
[17939.672128] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[17939.672134] cyapa 7-0067: smbus: probing with BL_STATUS command
[17939.672980] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[17939.672986] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[17939.672990] cyapa 7-0067: device state: operational mode
[17939.672994] cyapa 7-0067: ======< cyapa_get_query_data >======
[17939.676335] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18020.834410] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18020.834417] cyapa 7-0067: ======< cyapa_detect >======
[18020.834421] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18020.834425] cyapa 7-0067: ======< cyapa_poll_state >======
[18020.835011] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18020.835015] cyapa 7-0067: smbus: probing with BL_STATUS command
[18020.835866] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18020.835872] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18020.835876] cyapa 7-0067: device state: operational mode
[18020.835880] cyapa 7-0067: ======< cyapa_get_query_data >======
[18020.839215] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18069.743327] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18069.743334] cyapa 7-0067: ======< cyapa_detect >======
[18069.743338] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18069.743342] cyapa 7-0067: ======< cyapa_poll_state >======
[18069.743942] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18069.743947] cyapa 7-0067: smbus: probing with BL_STATUS command
[18069.744788] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18069.744794] cyapa 7-0067: status registers = [0x8f, 0x18, 0x01]
[18069.744798] cyapa 7-0067: device state: operational mode
[18069.744802] cyapa 7-0067: ======< cyapa_get_query_data >======
[18069.748149] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18165.647456] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18165.647463] cyapa 7-0067: ======< cyapa_detect >======
[18165.647483] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18165.647487] cyapa 7-0067: ======< cyapa_poll_state >======
[18165.648074] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18165.648080] cyapa 7-0067: smbus: probing with BL_STATUS command
[18165.648928] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18165.648934] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18165.648938] cyapa 7-0067: device state: operational mode
[18165.648941] cyapa 7-0067: ======< cyapa_get_query_data >======
[18165.652273] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18186.385211] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18186.385218] cyapa 7-0067: ======< cyapa_detect >======
[18186.385222] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18186.385227] cyapa 7-0067: ======< cyapa_poll_state >======
[18186.385813] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18186.385819] cyapa 7-0067: smbus: probing with BL_STATUS command
[18186.386660] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18186.386666] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18186.386670] cyapa 7-0067: device state: operational mode
[18186.386674] cyapa 7-0067: ======< cyapa_get_query_data >======
[18186.390024] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18221.230312] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18221.230319] cyapa 7-0067: ======< cyapa_detect >======
[18221.230323] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18221.230326] cyapa 7-0067: ======< cyapa_poll_state >======
[18221.230916] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18221.230920] cyapa 7-0067: smbus: probing with BL_STATUS command
[18221.231759] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18221.231764] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18221.231768] cyapa 7-0067: device state: operational mode
[18221.231772] cyapa 7-0067: ======< cyapa_get_query_data >======
[18221.235120] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18229.585990] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18229.585997] cyapa 7-0067: ======< cyapa_detect >======
[18229.586001] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18229.586005] cyapa 7-0067: ======< cyapa_poll_state >======
[18229.586594] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18229.586599] cyapa 7-0067: smbus: probing with BL_STATUS command
[18229.587441] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18229.587446] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18229.587450] cyapa 7-0067: device state: operational mode
[18229.587454] cyapa 7-0067: ======< cyapa_get_query_data >======
[18229.590804] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18237.419754] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18237.419761] cyapa 7-0067: ======< cyapa_detect >======
[18237.419765] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18237.419769] cyapa 7-0067: ======< cyapa_poll_state >======
[18237.420359] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18237.420363] cyapa 7-0067: smbus: probing with BL_STATUS command
[18237.421203] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18237.421208] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18237.421211] cyapa 7-0067: device state: operational mode
[18237.421215] cyapa 7-0067: ======< cyapa_get_query_data >======
[18237.424557] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18264.532093] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18264.532100] cyapa 7-0067: ======< cyapa_detect >======
[18264.532104] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18264.532108] cyapa 7-0067: ======< cyapa_poll_state >======
[18264.532687] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18264.532691] cyapa 7-0067: smbus: probing with BL_STATUS command
[18264.533527] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18264.533532] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[18264.533535] cyapa 7-0067: device state: operational mode
[18264.533539] cyapa 7-0067: ======< cyapa_get_query_data >======
[18264.536895] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18277.106865] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18277.106872] cyapa 7-0067: ======< cyapa_detect >======
[18277.106875] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18277.106879] cyapa 7-0067: ======< cyapa_poll_state >======
[18277.107465] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18277.107470] cyapa 7-0067: smbus: probing with BL_STATUS command
[18277.108309] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18277.108315] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18277.108319] cyapa 7-0067: device state: operational mode
[18277.108323] cyapa 7-0067: ======< cyapa_get_query_data >======
[18277.111670] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18307.421036] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18307.421043] cyapa 7-0067: ======< cyapa_detect >======
[18307.421047] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18307.421051] cyapa 7-0067: ======< cyapa_poll_state >======
[18307.421635] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18307.421640] cyapa 7-0067: smbus: probing with BL_STATUS command
[18307.422485] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18307.422491] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18307.422495] cyapa 7-0067: device state: operational mode
[18307.422499] cyapa 7-0067: ======< cyapa_get_query_data >======
[18307.425847] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18338.896749] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18338.896756] cyapa 7-0067: ======< cyapa_detect >======
[18338.896760] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18338.896764] cyapa 7-0067: ======< cyapa_poll_state >======
[18338.897336] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18338.897341] cyapa 7-0067: smbus: probing with BL_STATUS command
[18338.898184] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18338.898190] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18338.898194] cyapa 7-0067: device state: operational mode
[18338.898198] cyapa 7-0067: ======< cyapa_get_query_data >======
[18338.901538] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18369.641129] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18369.641136] cyapa 7-0067: ======< cyapa_detect >======
[18369.641140] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18369.641144] cyapa 7-0067: ======< cyapa_poll_state >======
[18369.641724] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18369.641729] cyapa 7-0067: smbus: probing with BL_STATUS command
[18369.642574] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18369.642580] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[18369.642584] cyapa 7-0067: device state: operational mode
[18369.642588] cyapa 7-0067: ======< cyapa_get_query_data >======
[18369.645925] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18397.734501] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18397.734508] cyapa 7-0067: ======< cyapa_detect >======
[18397.734512] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18397.734515] cyapa 7-0067: ======< cyapa_poll_state >======
[18397.735087] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18397.735092] cyapa 7-0067: smbus: probing with BL_STATUS command
[18397.735930] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18397.735936] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18397.735939] cyapa 7-0067: device state: operational mode
[18397.735943] cyapa 7-0067: ======< cyapa_get_query_data >======
[18397.739278] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18422.298766] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18422.298773] cyapa 7-0067: ======< cyapa_detect >======
[18422.298776] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18422.298780] cyapa 7-0067: ======< cyapa_poll_state >======
[18422.299367] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18422.299372] cyapa 7-0067: smbus: probing with BL_STATUS command
[18422.300213] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18422.300218] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18422.300222] cyapa 7-0067: device state: operational mode
[18422.300226] cyapa 7-0067: ======< cyapa_get_query_data >======
[18422.303567] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18426.098589] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18426.098596] cyapa 7-0067: ======< cyapa_detect >======
[18426.098599] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18426.098603] cyapa 7-0067: ======< cyapa_poll_state >======
[18426.099197] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18426.099201] cyapa 7-0067: smbus: probing with BL_STATUS command
[18426.100038] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18426.100043] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18426.100047] cyapa 7-0067: device state: operational mode
[18426.100051] cyapa 7-0067: ======< cyapa_get_query_data >======
[18426.103382] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18454.030620] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18454.030627] cyapa 7-0067: ======< cyapa_detect >======
[18454.030631] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18454.030635] cyapa 7-0067: ======< cyapa_poll_state >======
[18454.031222] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18454.031228] cyapa 7-0067: smbus: probing with BL_STATUS command
[18454.032073] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18454.032079] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[18454.032083] cyapa 7-0067: device state: operational mode
[18454.032087] cyapa 7-0067: ======< cyapa_get_query_data >======
[18454.035426] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[18500.447881] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[18500.447888] cyapa 7-0067: ======< cyapa_detect >======
[18500.447892] cyapa 7-0067: ======< cyapa_check_is_operational >======
[18500.447896] cyapa 7-0067: ======< cyapa_poll_state >======
[18500.448480] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[18500.448485] cyapa 7-0067: smbus: probing with BL_STATUS command
[18500.449330] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[18500.449334] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[18500.449338] cyapa 7-0067: device state: operational mode
[18500.449342] cyapa 7-0067: ======< cyapa_get_query_data >======
[18500.452682] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19166.239677] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19166.239684] cyapa 7-0067: ======< cyapa_detect >======
[19166.239688] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19166.239691] cyapa 7-0067: ======< cyapa_poll_state >======
[19166.240261] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19166.240265] cyapa 7-0067: smbus: probing with BL_STATUS command
[19166.241101] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19166.241106] cyapa 7-0067: status registers = [0x8f, 0x18, 0x01]
[19166.241109] cyapa 7-0067: device state: operational mode
[19166.241113] cyapa 7-0067: ======< cyapa_get_query_data >======
[19166.244438] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19176.432237] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19176.432244] cyapa 7-0067: ======< cyapa_detect >======
[19176.432249] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19176.432253] cyapa 7-0067: ======< cyapa_poll_state >======
[19176.432827] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19176.432833] cyapa 7-0067: smbus: probing with BL_STATUS command
[19176.433677] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19176.433684] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[19176.433687] cyapa 7-0067: device state: operational mode
[19176.433691] cyapa 7-0067: ======< cyapa_get_query_data >======
[19176.437008] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19182.486077] [drm:pch_irq_handler] *ERROR* PCH poison interrupt
[19182.832960] [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
[19187.220600] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19187.220615] cyapa 7-0067: ======< cyapa_detect >======
[19187.220619] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19187.220623] cyapa 7-0067: ======< cyapa_poll_state >======
[19187.221215] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19187.221220] cyapa 7-0067: smbus: probing with BL_STATUS command
[19187.222053] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19187.222058] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[19187.222062] cyapa 7-0067: device state: operational mode
[19187.222066] cyapa 7-0067: ======< cyapa_get_query_data >======
[19187.225391] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19201.602340] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19201.602347] cyapa 7-0067: ======< cyapa_detect >======
[19201.602351] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19201.602355] cyapa 7-0067: ======< cyapa_poll_state >======
[19201.602926] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19201.602930] cyapa 7-0067: smbus: probing with BL_STATUS command
[19201.603767] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19201.603771] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[19201.603775] cyapa 7-0067: device state: operational mode
[19201.603779] cyapa 7-0067: ======< cyapa_get_query_data >======
[19201.607107] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19233.917130] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19233.917137] cyapa 7-0067: ======< cyapa_detect >======
[19233.917140] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19233.917144] cyapa 7-0067: ======< cyapa_poll_state >======
[19233.917725] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19233.917729] cyapa 7-0067: smbus: probing with BL_STATUS command
[19233.918571] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19233.918577] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[19233.918581] cyapa 7-0067: device state: operational mode
[19233.918584] cyapa 7-0067: ======< cyapa_get_query_data >======
[19233.921913] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19250.687977] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19250.687984] cyapa 7-0067: ======< cyapa_detect >======
[19250.687988] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19250.687992] cyapa 7-0067: ======< cyapa_poll_state >======
[19250.688577] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19250.688582] cyapa 7-0067: smbus: probing with BL_STATUS command
[19250.689419] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19250.689425] cyapa 7-0067: status registers = [0x8f, 0x18, 0x10]
[19250.689428] cyapa 7-0067: device state: operational mode
[19250.689432] cyapa 7-0067: ======< cyapa_get_query_data >======
[19250.692761] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19334.252727] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19334.252745] cyapa 7-0067: ======< cyapa_detect >======
[19334.252749] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19334.252753] cyapa 7-0067: ======< cyapa_poll_state >======
[19334.253325] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19334.253330] cyapa 7-0067: smbus: probing with BL_STATUS command
[19334.254165] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19334.254171] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[19334.254175] cyapa 7-0067: device state: operational mode
[19334.254178] cyapa 7-0067: ======< cyapa_get_query_data >======
[19334.257500] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19353.273315] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19353.273322] cyapa 7-0067: ======< cyapa_detect >======
[19353.273326] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19353.273330] cyapa 7-0067: ======< cyapa_poll_state >======
[19353.273898] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19353.273902] cyapa 7-0067: smbus: probing with BL_STATUS command
[19353.274737] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19353.274742] cyapa 7-0067: status registers = [0x8f, 0x18, 0x20]
[19353.274746] cyapa 7-0067: device state: operational mode
[19353.274749] cyapa 7-0067: ======< cyapa_get_query_data >======
[19353.278075] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27
[19416.567543] cyapa 7-0067: read_block failed in cyapa_irq. ret = -6
[19416.567549] cyapa 7-0067: ======< cyapa_detect >======
[19416.567553] cyapa 7-0067: ======< cyapa_check_is_operational >======
[19416.567557] cyapa 7-0067: ======< cyapa_poll_state >======
[19416.568158] cyapa 7-0067: i2c read block reg: 0x00 len: 3 ret: 4294967290
[19416.568163] cyapa 7-0067: smbus: probing with BL_STATUS command
[19416.568999] cyapa 7-0067: smbus read block cmd: 0xc0 len: 3 ret: 3
[19416.569004] cyapa 7-0067: status registers = [0x8f, 0x18, 0x11]
[19416.569008] cyapa 7-0067: device state: operational mode
[19416.569012] cyapa 7-0067: ======< cyapa_get_query_data >======
[19416.572342] cyapa 7-0067: smbus read block cmd: 0x98 len: 27 ret: 27