[   199.610] 
X.Org X Server 1.12.99.904 (1.13.0 RC 4)
Release Date: 2012-08-07
[   199.610] X Protocol Version 11, Revision 0
[   199.610] Build Operating System: Linux 3.2.0-26-generic x86_64 Ubuntu
[   199.610] Current Operating System: Linux logan-VirtualBox 3.5.0-10-generic #10-Ubuntu SMP Mon Aug 13 15:23:58 UTC 2012 x86_64
[   199.610] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-10-generic root=UUID=e93afda7-8594-451c-9115-0a7b6d6d2c6a ro quiet splash vt.handoff=7
[   199.610] Build Date: 08 August 2012  11:48:21AM
[   199.610] xorg-server 2:1.12.99.904-0ubuntu1 (For technical support please see http://www.ubuntu.com/support) 
[   199.610] Current version of pixman: 0.26.0
[   199.610] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   199.610] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   199.610] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 18 15:21:13 2012
[   199.610] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   199.610] (==) No Layout section.  Using the first Screen section.
[   199.610] (==) No screen section available. Using defaults.
[   199.610] (**) |-->Screen "Default Screen Section" (0)
[   199.610] (**) |   |-->Monitor "<default monitor>"
[   199.611] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   199.611] (==) Automatically adding devices
[   199.611] (==) Automatically enabling devices
[   199.611] (==) Automatically adding GPU devices
[   199.611] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   199.611] 	Entry deleted from font path.
[   199.611] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   199.611] 	Entry deleted from font path.
[   199.611] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   199.611] 	Entry deleted from font path.
[   199.611] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   199.611] 	Entry deleted from font path.
[   199.611] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   199.611] 	Entry deleted from font path.
[   199.611] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   199.611] 	Entry deleted from font path.
[   199.611] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[   199.611] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   199.611] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   199.611] (II) Loader magic: 0x7fa8722e7c40
[   199.611] (II) Module ABI versions:
[   199.611] 	X.Org ANSI C Emulation: 0.4
[   199.611] 	X.Org Video Driver: 13.0
[   199.611] 	X.Org XInput driver : 18.0
[   199.611] 	X.Org Server Extension : 6.0
[   199.623] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216
[   199.627] (II) Open ACPI successful (/var/run/acpid.socket)
[   199.627] Initializing built-in extension Generic Event Extension
[   199.627] Initializing built-in extension SHAPE
[   199.627] Initializing built-in extension MIT-SHM
[   199.627] Initializing built-in extension XInputExtension
[   199.627] Initializing built-in extension XTEST
[   199.627] Initializing built-in extension BIG-REQUESTS
[   199.627] Initializing built-in extension SYNC
[   199.627] Initializing built-in extension XKEYBOARD
[   199.627] Initializing built-in extension XC-MISC
[   199.627] Initializing built-in extension SECURITY
[   199.627] Initializing built-in extension XINERAMA
[   199.627] Initializing built-in extension XFIXES
[   199.627] Initializing built-in extension RENDER
[   199.627] Initializing built-in extension RANDR
[   199.627] Initializing built-in extension COMPOSITE
[   199.627] Initializing built-in extension DAMAGE
[   199.627] Initializing built-in extension MIT-SCREEN-SAVER
[   199.627] Initializing built-in extension DOUBLE-BUFFER
[   199.627] Initializing built-in extension RECORD
[   199.627] Initializing built-in extension DPMS
[   199.627] Initializing built-in extension X-Resource
[   199.627] Initializing built-in extension XVideo
[   199.627] Initializing built-in extension XVideo-MotionCompensation
[   199.627] Initializing built-in extension XFree86-VidModeExtension
[   199.627] Initializing built-in extension XFree86-DGA
[   199.627] Initializing built-in extension XFree86-DRI
[   199.627] Initializing built-in extension DRI2
[   199.627] (II) LoadModule: "glx"
[   199.628] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   199.628] (II) Module glx: vendor="X.Org Foundation"
[   199.628] 	compiled for 1.12.99.904, module version = 1.0.0
[   199.628] 	ABI class: X.Org Server Extension, version 6.0
[   199.628] (==) AIGLX enabled
[   199.628] Loading extension GLX
[   199.628] (==) Matched vboxvideo as autoconfigured driver 0
[   199.628] (==) Matched vesa as autoconfigured driver 1
[   199.628] (==) Matched modesetting as autoconfigured driver 2
[   199.628] (==) Matched fbdev as autoconfigured driver 3
[   199.628] (==) Assigned the driver to the xf86ConfigLayout
[   199.628] (II) LoadModule: "vboxvideo"
[   199.628] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[   199.628] (II) Module vboxvideo: vendor="Oracle Corporation"
[   199.628] 	compiled for 1.12.99.904, module version = 1.0.1
[   199.628] 	Module class: X.Org Video Driver
[   199.628] 	ABI class: X.Org Video Driver, version 13.0
[   199.628] (**) Load address of symbol "VBOXVIDEO" is 0x7fa86ef01460
[   199.628] (II) LoadModule: "vesa"
[   199.628] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   199.628] (II) Module vesa: vendor="X.Org Foundation"
[   199.628] 	compiled for 1.12.99.902, module version = 2.3.2
[   199.628] 	Module class: X.Org Video Driver
[   199.628] 	ABI class: X.Org Video Driver, version 13.0
[   199.628] (II) LoadModule: "modesetting"
[   199.629] (WW) Warning, couldn't open module modesetting
[   199.629] (II) UnloadModule: "modesetting"
[   199.629] (II) Unloading modesetting
[   199.629] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   199.629] (II) LoadModule: "fbdev"
[   199.629] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   199.629] (II) Module fbdev: vendor="X.Org Foundation"
[   199.629] 	compiled for 1.12.99.902, module version = 0.4.3
[   199.629] 	Module class: X.Org Video Driver
[   199.629] 	ABI class: X.Org Video Driver, version 13.0
[   199.629] (==) Matched vboxvideo as autoconfigured driver 0
[   199.629] (==) Matched vesa as autoconfigured driver 1
[   199.629] (==) Matched modesetting as autoconfigured driver 2
[   199.629] (==) Matched fbdev as autoconfigured driver 3
[   199.629] (==) Assigned the driver to the xf86ConfigLayout
[   199.629] (II) LoadModule: "vboxvideo"
[   199.629] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[   199.629] (II) Module vboxvideo: vendor="Oracle Corporation"
[   199.630] 	compiled for 1.12.99.904, module version = 1.0.1
[   199.630] 	Module class: X.Org Video Driver
[   199.630] 	ABI class: X.Org Video Driver, version 13.0
[   199.630] (II) UnloadModule: "vboxvideo"
[   199.630] (II) Unloading vboxvideo
[   199.630] (II) Failed to load module "vboxvideo" (already loaded, 32680)
[   199.630] (II) LoadModule: "vesa"
[   199.630] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   199.630] (II) Module vesa: vendor="X.Org Foundation"
[   199.630] 	compiled for 1.12.99.902, module version = 2.3.2
[   199.630] 	Module class: X.Org Video Driver
[   199.630] 	ABI class: X.Org Video Driver, version 13.0
[   199.630] (II) UnloadModule: "vesa"
[   199.630] (II) Unloading vesa
[   199.630] (II) Failed to load module "vesa" (already loaded, 32680)
[   199.630] (II) LoadModule: "modesetting"
[   199.630] (WW) Warning, couldn't open module modesetting
[   199.630] (II) UnloadModule: "modesetting"
[   199.630] (II) Unloading modesetting
[   199.630] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   199.630] (II) LoadModule: "fbdev"
[   199.631] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   199.631] (II) Module fbdev: vendor="X.Org Foundation"
[   199.631] 	compiled for 1.12.99.902, module version = 0.4.3
[   199.631] 	Module class: X.Org Video Driver
[   199.631] 	ABI class: X.Org Video Driver, version 13.0
[   199.631] (II) UnloadModule: "fbdev"
[   199.631] (II) Unloading fbdev
[   199.631] (II) Failed to load module "fbdev" (already loaded, 0)
[   199.631] (II) VBoxVideo: guest driver for VirtualBox: vbox
[   199.631] (II) VESA: driver for VESA chipsets: vesa
[   199.631] (II) FBDEV: driver for framebuffer: fbdev
[   199.631] (++) using VT number 7

[   199.631] (WW) Falling back to old probe method for vesa
[   199.631] (WW) Falling back to old probe method for fbdev
[   199.631] (II) Loading sub module "fbdevhw"
[   199.631] (II) LoadModule: "fbdevhw"
[   199.631] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   199.631] (II) Module fbdevhw: vendor="X.Org Foundation"
[   199.631] 	compiled for 1.12.99.904, module version = 0.0.2
[   199.631] 	ABI class: X.Org Video Driver, version 13.0
[   199.631] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.18_Ubuntu
[   199.631] (II) Loading sub module "ramdac"
[   199.631] (II) LoadModule: "ramdac"
[   199.631] (II) Module "ramdac" already built-in
[   199.631] (II) Loading sub module "fb"
[   199.631] (II) LoadModule: "fb"
[   199.631] (II) Loading /usr/lib/xorg/modules/libfb.so
[   199.632] (II) Module fb: vendor="X.Org Foundation"
[   199.632] 	compiled for 1.12.99.904, module version = 1.0.0
[   199.632] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   199.632] (II) Loading sub module "shadowfb"
[   199.632] (II) LoadModule: "shadowfb"
[   199.632] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   199.632] (II) Module shadowfb: vendor="X.Org Foundation"
[   199.632] 	compiled for 1.12.99.904, module version = 1.0.0
[   199.632] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   199.632] (II) Loading sub module "vgahw"
[   199.632] (II) LoadModule: "vgahw"
[   199.632] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   199.632] (II) Module vgahw: vendor="X.Org Foundation"
[   199.632] 	compiled for 1.12.99.904, module version = 0.1.0
[   199.632] 	ABI class: X.Org Video Driver, version 13.0
[   199.632] (II) Loading sub module "dri"
[   199.632] (II) LoadModule: "dri"
[   199.632] (II) Module "dri" already built-in
[   199.635] (II) VBoxVideo(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   199.635] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[   199.636] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[   199.636] (**) VBoxVideo(0):  Built-in mode "VBoxInitialMode": 66.5 MHz (scaled from 0.0 MHz), 46.0 kHz, 60.0 Hz
[   199.636] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 (46.0 kHz b)
[   199.636] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 66.5 MHz (scaled from 0.0 MHz), 46.0 kHz, 60.0 Hz
[   199.636] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 (46.0 kHz b)
[   199.636] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 66.5 MHz (scaled from 0.0 MHz), 46.0 kHz, 60.0 Hz
[   199.636] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 (46.0 kHz b)
[   199.636] (**) VBoxVideo(0):  Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[   199.636] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[   199.636] (**) VBoxVideo(0):  Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[   199.636] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[   199.636] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   199.636] (==) VBoxVideo(0): RGB weight 888
[   199.636] (==) VBoxVideo(0): Default visual is TrueColor
[   199.636] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[   199.636] (==) VBoxVideo(0): DPI set to (96, 96)
[   199.636] (II) UnloadModule: "vesa"
[   199.636] (II) Unloading vesa
[   199.636] (II) UnloadModule: "fbdev"
[   199.636] (II) Unloading fbdev
[   199.636] (II) UnloadSubModule: "fbdevhw"
[   199.636] (II) Unloading fbdevhw
[   199.636] (--) Depth 24 pixmap format is 32 bpp
[   199.987] (EE) [drm] drmOpen failed.
[   199.988] (EE) VBoxVideo(0): DRIScreenInit failed, disabling DRI.
[   199.988] (II) VBoxVideo(0): visual configurations initialized
[   199.988] (II) VBoxVideo(0): Requested monitor count: 1
[   199.988] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[   199.988] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[   199.988] (II) VBoxVideo(0): EDID for output VBOX0
[   199.988] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 49874336
[   199.988] (II) VBoxVideo(0): Year: 1990  Week: 1
[   199.988] (II) VBoxVideo(0): EDID Version: 1.3
[   199.988] (II) VBoxVideo(0): Digital Display Input
[   199.988] (II) VBoxVideo(0): Indeterminate output size
[   199.988] (II) VBoxVideo(0): Gamma: 2.20
[   199.988] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[   199.988] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   199.988] (II) VBoxVideo(0): Default color space is primary color space
[   199.988] (II) VBoxVideo(0): First detailed timing is preferred mode
[   199.988] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   199.988] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   199.988] (II) VBoxVideo(0): Manufacturer's mask: 0
[   199.988] (II) VBoxVideo(0): Supported detailed timing:
[   199.988] (II) VBoxVideo(0): clock: 66.5 MHz   Image Size:  0 x 0 mm
[   199.988] (II) VBoxVideo(0): h_active: 1440  h_sync: 1442  h_sync_end 1444 h_blank_end 1446 h_border: 0
[   199.988] (II) VBoxVideo(0): v_active: 761  v_sync: 763  v_sync_end 765 v_blanking: 767 v_border: 0
[   199.988] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[   199.988] (II) VBoxVideo(0): Monitor name: VBOX monitor
[   199.988] (II) VBoxVideo(0): EDID (in hex):
[   199.988] (II) VBoxVideo(0): 	00ffffffffffff0058580000a005f902
[   199.988] (II) VBoxVideo(0): 	0100010380000078eeee91a3544c9926
[   199.988] (II) VBoxVideo(0): 	0f505400000001010101010101010101
[   199.988] (II) VBoxVideo(0): 	010101010101fe19a00650f906200202
[   199.988] (II) VBoxVideo(0): 	2200000000000000000000fd0000c800
[   199.988] (II) VBoxVideo(0): 	c864000a202020202020000000fc0056
[   199.988] (II) VBoxVideo(0): 	424f58206d6f6e69746f720a00000010
[   199.988] (II) VBoxVideo(0): 	000a2020202020202020202020200073
[   199.988] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   199.988] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x761 Warning: We only handle separate sync.
[   199.988] (II) VBoxVideo(0): Using hsync ranges from config file
[   199.988] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   199.988] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   199.988] (II) VBoxVideo(0): Modeline "1440x761"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 -hsync -vsync (46.0 kHz eP)
[   199.989] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[   199.989] (II) VBoxVideo(0): Modeline "1440x761"x60.0   66.54  1440 1442 1444 1446  761 763 765 767 (46.0 kHz Pb)
[   199.989] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[   199.989] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[   199.989] (II) VBoxVideo(0): Output VBOX0 connected
[   199.989] (II) VBoxVideo(0): Using exact sizes for initial modes
[   199.989] (II) VBoxVideo(0): Output VBOX0 using initial mode 1440x761
[   199.989] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   199.989] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   199.990] (==) VBoxVideo(0): DPMS enabled
[   199.990] (--) RandR disabled
[   199.994] (II) AIGLX: Screen 0 is not DRI2 capable
[   199.994] (II) AIGLX: Screen 0 is not DRI capable
[   200.001] (II) AIGLX: Loaded and initialized swrast
[   200.001] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   200.001] (II) VBoxVideo(0): Setting screen physical size to 381 x 201
[   200.014] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   200.018] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   200.018] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   200.018] (II) LoadModule: "evdev"
[   200.019] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   200.019] (II) Module evdev: vendor="X.Org Foundation"
[   200.019] 	compiled for 1.12.99.904, module version = 2.7.3
[   200.019] 	Module class: X.Org XInput Driver
[   200.019] 	ABI class: X.Org XInput driver, version 18.0
[   200.019] (II) Using input driver 'evdev' for 'Power Button'
[   200.019] (**) Power Button: always reports core events
[   200.019] (**) evdev: Power Button: Device: "/dev/input/event0"
[   200.019] (--) evdev: Power Button: Vendor 0 Product 0x1
[   200.019] (--) evdev: Power Button: Found keys
[   200.019] (II) evdev: Power Button: Configuring as keyboard
[   200.019] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[   200.019] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   200.019] (**) Option "xkb_rules" "evdev"
[   200.019] (**) Option "xkb_model" "pc105"
[   200.019] (**) Option "xkb_layout" "us"
[   200.019] (**) Option "xkb_variant" "mac"
[   200.021] (II) XKB: reuse xkmfile /var/lib/xkb/server-2981573DC6A9CB6BAB3002C414DE75F47749BC4F.xkm
[   200.022] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   200.022] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   200.022] (II) Using input driver 'evdev' for 'Sleep Button'
[   200.022] (**) Sleep Button: always reports core events
[   200.022] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   200.022] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   200.022] (--) evdev: Sleep Button: Found keys
[   200.022] (II) evdev: Sleep Button: Configuring as keyboard
[   200.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[   200.022] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[   200.022] (**) Option "xkb_rules" "evdev"
[   200.022] (**) Option "xkb_model" "pc105"
[   200.023] (**) Option "xkb_layout" "us"
[   200.023] (**) Option "xkb_variant" "mac"
[   200.023] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event3)
[   200.023] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[   200.023] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[   200.023] (**) VirtualBox USB Tablet: always reports core events
[   200.023] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event3"
[   200.023] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[   200.023] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[   200.023] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[   200.023] (--) evdev: VirtualBox USB Tablet: Found relative axes
[   200.023] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[   200.023] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[   200.023] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[   200.023] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[   200.023] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[   200.023] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[   200.023] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   200.023] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input3/event3"
[   200.023] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 8)
[   200.023] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[   200.023] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[   200.024] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[   200.024] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[   200.024] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[   200.024] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[   200.024] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[   200.024] (II) No input driver specified, ignoring this device.
[   200.024] (II) This device may have been added with another device file.
[   200.024] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[   200.024] (II) No input driver specified, ignoring this device.
[   200.024] (II) This device may have been added with another device file.
[   200.024] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   200.024] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   200.024] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   200.024] (**) AT Translated Set 2 keyboard: always reports core events
[   200.024] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[   200.024] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   200.024] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   200.024] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   200.024] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   200.024] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   200.024] (**) Option "xkb_rules" "evdev"
[   200.024] (**) Option "xkb_model" "pc105"
[   200.024] (**) Option "xkb_layout" "us"
[   200.024] (**) Option "xkb_variant" "mac"
[   200.025] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event5)
[   200.025] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[   200.025] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[   200.025] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[   200.025] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
[   200.025] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[   200.025] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[   200.025] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[   200.025] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[   200.025] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[   200.025] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[   200.025] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[   200.025] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[   200.025] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   200.025] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[   200.025] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[   200.025] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[   200.025] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[   200.025] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[   200.025] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[   200.025] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[   200.025] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
[   200.025] (II) No input driver specified, ignoring this device.
[   200.025] (II) This device may have been added with another device file.
[   200.027] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event4)
[   200.027] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[   200.027] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[   200.027] (**) VirtualBox mouse integration: always reports core events
[   200.027] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event4"
[   200.027] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[   200.027] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[   200.027] (--) evdev: VirtualBox mouse integration: Found absolute axes
[   200.027] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[   200.027] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[   200.027] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[   200.027] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[   200.027] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   200.027] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[   200.027] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 11)
[   200.027] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[   200.027] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[   200.027] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[   200.027] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[   200.027] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[   200.027] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[   200.027] (II) No input driver specified, ignoring this device.
[   200.027] (II) This device may have been added with another device file.
[   200.359] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   200.359] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x761 Warning: We only handle separate sync.
[   200.359] (II) VBoxVideo(0): Using hsync ranges from config file
[   200.359] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   200.359] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   200.359] (II) VBoxVideo(0): Modeline "1440x761"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 -hsync -vsync (46.0 kHz eP)
[   200.695] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   200.695] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x761 Warning: We only handle separate sync.
[   200.695] (II) VBoxVideo(0): Using hsync ranges from config file
[   200.695] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   200.695] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   200.695] (II) VBoxVideo(0): Modeline "1440x761"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 -hsync -vsync (46.0 kHz eP)
[   208.447] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   208.447] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x761 Warning: We only handle separate sync.
[   208.447] (II) VBoxVideo(0): Using hsync ranges from config file
[   208.447] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   208.447] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   208.447] (II) VBoxVideo(0): Modeline "1440x761"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 -hsync -vsync (46.0 kHz eP)
[   208.652] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   208.652] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x761 Warning: We only handle separate sync.
[   208.653] (II) VBoxVideo(0): Using hsync ranges from config file
[   208.653] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   208.653] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   208.653] (II) VBoxVideo(0): Modeline "1440x761"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 -hsync -vsync (46.0 kHz eP)
[   209.440] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   209.440] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x761 Warning: We only handle separate sync.
[   209.440] (II) VBoxVideo(0): Using hsync ranges from config file
[   209.440] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   209.440] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   209.440] (II) VBoxVideo(0): Modeline "1440x761"x0.0   66.54  1440 1442 1444 1446  761 763 765 767 -hsync -vsync (46.0 kHz eP)
[   211.686] (II) XKB: reuse xkmfile /var/lib/xkb/server-2BEEA38CDB7DA49AACA7C74CC35F95D0120D237B.xkm
[   280.604] (II) evdev: VirtualBox mouse integration: Close
[   280.604] (II) UnloadModule: "evdev"
[   280.604] (II) evdev: ImExPS/2 Generic Explorer Mouse: Close
[   280.604] (II) UnloadModule: "evdev"
[   280.604] (II) evdev: AT Translated Set 2 keyboard: Close
[   280.604] (II) UnloadModule: "evdev"
[   280.604] (II) evdev: VirtualBox USB Tablet: Close
[   280.604] (II) UnloadModule: "evdev"
[   280.604] (II) evdev: Sleep Button: Close
[   280.604] (II) UnloadModule: "evdev"
[   280.604] (II) evdev: Power Button: Close
[   280.604] (II) UnloadModule: "evdev"
[   280.625] Server terminated successfully (0). Closing log file.