[    26.498] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[    26.498] X Protocol Version 11, Revision 0
[    26.498] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[    26.498] Current Operating System: Linux tao-infopoint 2.6.38-11-server #48-Ubuntu SMP Fri Jul 29 19:20:32 UTC 2011 x86_64
[    26.498] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-server root=UUID=825941db-d8b4-41af-8208-b095c47eba13 ro quiet
[    26.498] Build Date: 11 August 2011  03:43:05PM
[    26.498] xorg-server 2:1.10.1-1ubuntu1.2 (For technical support please see http://www.ubuntu.com/support) 
[    26.498] Current version of pixman: 0.20.2
[    26.498] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    26.498] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 24 10:30:58 2011
[    26.498] (++) Using config file: "/root/xorg.conf.kiosk"
[    26.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.498] (==) ServerLayout "Autogenerated configuration for WebKiosk"
[    26.498] (==) No screen section available. Using defaults.
[    26.498] (**) |-->Screen "Default Screen Section" (0)
[    26.498] (**) |   |-->Monitor "<default monitor>"
[    26.499] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    26.499] (==) Automatically adding devices
[    26.499] (==) Automatically enabling devices
[    26.499] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    26.499] 	Entry deleted from font path.
[    26.499] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    26.499] 	Entry deleted from font path.
[    26.499] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    26.499] 	Entry deleted from font path.
[    26.499] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    26.499] 	Entry deleted from font path.
[    26.499] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    26.499] 	Entry deleted from font path.
[    26.499] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
[    26.499] 	Entry deleted from font path.
[    26.499] 	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
[    26.499] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    26.499] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    26.499] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.499] (II) Loader magic: 0x7e17e0
[    26.499] (II) Module ABI versions:
[    26.499] 	X.Org ANSI C Emulation: 0.4
[    26.499] 	X.Org Video Driver: 10.0
[    26.499] 	X.Org XInput driver : 12.3
[    26.499] 	X.Org Server Extension : 5.0
[    26.499] (--) PCI:*(0:0:2:0) 8086:2a42:8086:2a42 rev 7, Mem @ 0xfd400000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/8
[    26.499] (--) PCI: (0:0:2:1) 8086:2a43:8086:2a42 rev 7, Mem @ 0xfdb00000/1048576
[    26.499] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    26.499] (II) LoadModule: "extmod"
[    26.500] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    26.500] (II) Module extmod: vendor="X.Org Foundation"
[    26.500] 	compiled for 1.10.1, module version = 1.0.0
[    26.500] 	Module class: X.Org Server Extension
[    26.500] 	ABI class: X.Org Server Extension, version 5.0
[    26.500] (II) Loading extension MIT-SCREEN-SAVER
[    26.500] (II) Loading extension XFree86-VidModeExtension
[    26.500] (II) Loading extension XFree86-DGA
[    26.500] (II) Loading extension DPMS
[    26.500] (II) Loading extension XVideo
[    26.500] (II) Loading extension XVideo-MotionCompensation
[    26.500] (II) Loading extension X-Resource
[    26.500] (II) LoadModule: "dbe"
[    26.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    26.500] (II) Module dbe: vendor="X.Org Foundation"
[    26.500] 	compiled for 1.10.1, module version = 1.0.0
[    26.500] 	Module class: X.Org Server Extension
[    26.500] 	ABI class: X.Org Server Extension, version 5.0
[    26.500] (II) Loading extension DOUBLE-BUFFER
[    26.500] (II) LoadModule: "glx"
[    26.500] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    26.501] (II) Module glx: vendor="X.Org Foundation"
[    26.501] 	compiled for 1.10.1, module version = 1.0.0
[    26.501] 	ABI class: X.Org Server Extension, version 5.0
[    26.501] (==) AIGLX enabled
[    26.501] (II) Loading extension GLX
[    26.501] (II) LoadModule: "record"
[    26.501] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    26.501] (II) Module record: vendor="X.Org Foundation"
[    26.501] 	compiled for 1.10.1, module version = 1.13.0
[    26.501] 	Module class: X.Org Server Extension
[    26.501] 	ABI class: X.Org Server Extension, version 5.0
[    26.501] (II) Loading extension RECORD
[    26.501] (II) LoadModule: "dri"
[    26.501] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    26.501] (II) Module dri: vendor="X.Org Foundation"
[    26.501] 	compiled for 1.10.1, module version = 1.0.0
[    26.501] 	ABI class: X.Org Server Extension, version 5.0
[    26.501] (II) Loading extension XFree86-DRI
[    26.501] (II) LoadModule: "dri2"
[    26.501] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.501] (II) Module dri2: vendor="X.Org Foundation"
[    26.501] 	compiled for 1.10.1, module version = 1.2.0
[    26.501] 	ABI class: X.Org Server Extension, version 5.0
[    26.501] (II) Loading extension DRI2
[    26.501] (==) Matched intel as autoconfigured driver 0
[    26.501] (==) Matched vesa as autoconfigured driver 1
[    26.501] (==) Matched fbdev as autoconfigured driver 2
[    26.501] (==) Assigned the driver to the xf86ConfigLayout
[    26.501] (II) LoadModule: "intel"
[    26.502] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    26.502] (II) Module intel: vendor="X.Org Foundation"
[    26.502] 	compiled for 1.10.1, module version = 2.14.0
[    26.502] 	Module class: X.Org Video Driver
[    26.502] 	ABI class: X.Org Video Driver, version 10.0
[    26.502] (II) LoadModule: "vesa"
[    26.502] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    26.502] (II) Module vesa: vendor="X.Org Foundation"
[    26.502] 	compiled for 1.10.0, module version = 2.3.0
[    26.502] 	Module class: X.Org Video Driver
[    26.502] 	ABI class: X.Org Video Driver, version 10.0
[    26.502] (II) LoadModule: "fbdev"
[    26.502] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    26.502] (II) Module fbdev: vendor="X.Org Foundation"
[    26.502] 	compiled for 1.10.0, module version = 0.4.2
[    26.502] 	ABI class: X.Org Video Driver, version 10.0
[    26.502] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
[    26.503] (II) VESA: driver for VESA chipsets: vesa
[    26.503] (II) FBDEV: driver for framebuffer: fbdev
[    26.503] (--) using VT number 4

[    27.009] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    27.010] (WW) Falling back to old probe method for vesa
[    27.010] (WW) Falling back to old probe method for fbdev
[    27.010] (II) Loading sub module "fbdevhw"
[    27.010] (II) LoadModule: "fbdevhw"
[    27.010] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.010] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.010] 	compiled for 1.10.1, module version = 0.0.2
[    27.010] 	ABI class: X.Org Video Driver, version 10.0
[    27.010] drmOpenDevice: node name is /dev/dri/card0
[    27.010] drmOpenDevice: open result is 10, (OK)
[    27.090] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    27.090] drmOpenDevice: node name is /dev/dri/card0
[    27.090] drmOpenDevice: open result is 10, (OK)
[    27.090] drmOpenByBusid: drmOpenMinor returns 10
[    27.090] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    27.090] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    27.090] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    27.090] (==) intel(0): RGB weight 888
[    27.090] (==) intel(0): Default visual is TrueColor
[    27.090] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[    27.090] (--) intel(0): Chipset: "GM45"
[    27.090] (**) intel(0): Relaxed fencing enabled
[    27.090] (**) intel(0): Tiling enabled
[    27.090] (**) intel(0): SwapBuffers wait enabled
[    27.090] (==) intel(0): video overlay key set to 0x101fe
[    27.091] (II) intel(0): Output LVDS1 has no monitor section
[    27.162] (II) intel(0): Output VGA1 has no monitor section
[    27.290] (II) intel(0): Output DVI1 has no monitor section
[    27.294] (II) intel(0): Output HDMI1 has no monitor section
[    27.294] (II) intel(0): Output DP1 has no monitor section
[    27.295] (II) intel(0): Output DP2 has no monitor section
[    27.295] (II) intel(0): EDID for output LVDS1
[    27.295] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    27.295] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    27.295] (II) intel(0): Printing probed modes for output LVDS1
[    27.295] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.295] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.295] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    27.295] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.362] (II) intel(0): EDID for output VGA1
[    27.362] (II) intel(0): Manufacturer: CLT  Model: 1026  Serial#: 0
[    27.362] (II) intel(0): Year: 2006  Week: 49
[    27.362] (II) intel(0): EDID Version: 1.3
[    27.362] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    27.362] (II) intel(0): Sync:  Separate
[    27.362] (II) intel(0): Max Image Size [cm]: horiz.: 113  vert.: 67
[    27.362] (II) intel(0): Gamma: 2.20
[    27.362] (II) intel(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
[    27.362] (II) intel(0): First detailed timing is preferred mode
[    27.362] (II) intel(0): redX: 0.585 redY: 0.355   greenX: 0.299 greenY: 0.584
[    27.362] (II) intel(0): blueX: 0.154 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[    27.362] (II) intel(0): Supported established timings:
[    27.362] (II) intel(0): 720x400@70Hz
[    27.362] (II) intel(0): 640x480@60Hz
[    27.362] (II) intel(0): 640x480@67Hz
[    27.362] (II) intel(0): 640x480@72Hz
[    27.362] (II) intel(0): 640x480@75Hz
[    27.362] (II) intel(0): 800x600@56Hz
[    27.362] (II) intel(0): 800x600@60Hz
[    27.362] (II) intel(0): 800x600@72Hz
[    27.362] (II) intel(0): 800x600@75Hz
[    27.362] (II) intel(0): 832x624@75Hz
[    27.362] (II) intel(0): 1024x768@60Hz
[    27.362] (II) intel(0): 1024x768@70Hz
[    27.362] (II) intel(0): 1024x768@75Hz
[    27.362] (II) intel(0): 1280x1024@75Hz
[    27.362] (II) intel(0): 1152x864@75Hz
[    27.362] (II) intel(0): Manufacturer's mask: 0
[    27.362] (II) intel(0): Supported standard timings:
[    27.362] (II) intel(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    27.362] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[    27.362] (II) intel(0): #2: hsize: 720  vsize 405  refresh: 60  vid: 49211
[    27.362] (II) intel(0): #3: hsize: 1024  vsize 768  refresh: 70  vid: 19041
[    27.362] (II) intel(0): #4: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[    27.362] (II) intel(0): #5: hsize: 1400  vsize 787  refresh: 60  vid: 49296
[    27.362] (II) intel(0): #6: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    27.362] (II) intel(0): #7: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    27.362] (II) intel(0): Supported detailed timing:
[    27.362] (II) intel(0): clock: 150.0 MHz   Image Size:  1043 x 587 mm
[    27.362] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2048 h_blank_end 2072 h_border: 0
[    27.362] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1116 v_border: 0
[    27.362] (II) intel(0): Serial No: HHA2XX76C0015
[    27.362] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[    27.362] (II) intel(0): Monitor name: ST-HB42XXX-A
[    27.362] (II) intel(0): EDID (in hex):
[    27.362] (II) intel(0): 	00ffffffffffff000d94261000000000
[    27.362] (II) intel(0): 	3110010368714378cacaa5955b4c9527
[    27.362] (II) intel(0): 	225054bfef808180818f3bc0614a614f
[    27.362] (II) intel(0): 	90c081c0d1c0983a8098703824403050
[    27.362] (II) intel(0): 	3600134b42000004000000ff00484841
[    27.362] (II) intel(0): 	32585837364330303135000000fd0032
[    27.362] (II) intel(0): 	4c1e530f000a202020202020000000fc
[    27.362] (II) intel(0): 	0053542d484234325858582d410a002b
[    27.362] (II) intel(0): Not using mode "1920x1080" (bad mode clock/interlace/doublescan)
[    27.362] (II) intel(0): Printing probed modes for output VGA1
[    27.362] (II) intel(0): Modeline "1920x1080"x64.9  150.00  1920 1968 2048 2072  1080 1083 1089 1116 -hsync +vsync (72.4 kHz)
[    27.362] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    27.362] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    27.362] (II) intel(0): Modeline "1400x787"x60.0   89.57  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    27.362] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    27.362] (II) intel(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    27.362] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    27.362] (II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    27.362] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    27.362] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.362] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    27.362] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    27.362] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    27.362] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.362] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    27.362] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    27.362] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    27.362] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    27.362] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.362] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    27.491] (II) intel(0): EDID for output DVI1
[    27.491] (II) intel(0): Manufacturer: CLT  Model: 1026  Serial#: 0
[    27.491] (II) intel(0): Year: 2006  Week: 49
[    27.491] (II) intel(0): EDID Version: 1.3
[    27.491] (II) intel(0): Digital Display Input
[    27.491] (II) intel(0): Max Image Size [cm]: horiz.: 113  vert.: 67
[    27.491] (II) intel(0): Gamma: 2.20
[    27.491] (II) intel(0): No DPMS capabilities specified
[    27.491] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    27.491] (II) intel(0): First detailed timing is preferred mode
[    27.491] (II) intel(0): redX: 0.585 redY: 0.355   greenX: 0.299 greenY: 0.584
[    27.491] (II) intel(0): blueX: 0.154 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[    27.491] (II) intel(0): Manufacturer's mask: 0
[    27.491] (II) intel(0): Supported standard timings:
[    27.491] (II) intel(0): #0: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    27.491] (II) intel(0): #1: hsize: 1920  vsize 1536  refresh: 60  vid: 32977
[    27.491] (II) intel(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    27.491] (II) intel(0): #3: hsize: 1400  vsize 787  refresh: 60  vid: 49296
[    27.491] (II) intel(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    27.491] (II) intel(0): #5: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    27.491] (II) intel(0): Supported detailed timing:
[    27.491] (II) intel(0): clock: 150.0 MHz   Image Size:  1051 x 587 mm
[    27.491] (II) intel(0): h_active: 1920  h_sync: 1960  h_sync_end 2000 h_blank_end 2048 h_border: 0
[    27.491] (II) intel(0): v_active: 1080  v_sync: 1082  v_sync_end 1087 v_blanking: 1112 v_border: 0
[    27.491] (II) intel(0): Serial No: HHA2XX76C0011
[    27.491] (II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 48 H max: 50 kHz, PixClock max 155 MHz
[    27.491] (II) intel(0): Monitor name: ST-HB42XXX-D
[    27.491] (II) intel(0): EDID (in hex):
[    27.491] (II) intel(0): 	00ffffffffffff000d94261000000000
[    27.491] (II) intel(0): 	31100103807143780acaa5955b4c9527
[    27.491] (II) intel(0): 	225054000000a9c0d18081c090c0a940
[    27.491] (II) intel(0): 	814001010101983a8080703820402828
[    27.491] (II) intel(0): 	25001b4b4200001e000000ff00484841
[    27.491] (II) intel(0): 	32585837364330303131000000fd003b
[    27.491] (II) intel(0): 	3d30320f000a202020202020000000fc
[    27.491] (II) intel(0): 	0053542d484234325858582d440a00e2
[    27.491] (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan)
[    27.491] (II) intel(0): Printing probed modes for output DVI1
[    27.491] (II) intel(0): Modeline "1920x1080"x65.9  150.00  1920 1960 2000 2048  1080 1082 1087 1112 +hsync +vsync (73.2 kHz)
[    27.491] (II) intel(0): Modeline "1600x900"x60.0  118.96  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    27.491] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    27.491] (II) intel(0): Modeline "1400x787"x60.0   89.57  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    27.491] (II) intel(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    27.496] (II) intel(0): EDID for output HDMI1
[    27.496] (II) intel(0): EDID for output DP1
[    27.497] (II) intel(0): EDID for output DP2
[    27.497] (II) intel(0): Output LVDS1 connected
[    27.497] (II) intel(0): Output VGA1 connected
[    27.497] (II) intel(0): Output DVI1 connected
[    27.497] (II) intel(0): Output HDMI1 disconnected
[    27.497] (II) intel(0): Output DP1 disconnected
[    27.497] (II) intel(0): Output DP2 disconnected
[    27.497] (II) intel(0): Using sloppy heuristic for initial modes
[    27.497] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    27.497] (II) intel(0): Output VGA1 using initial mode 1024x768
[    27.497] (II) intel(0): Output DVI1 using initial mode 1280x720
[    27.497] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.497] (II) intel(0): Kernel page flipping support detected, enabling
[    27.497] (==) intel(0): DPI set to (96, 96)
[    27.497] (II) Loading sub module "fb"
[    27.497] (II) LoadModule: "fb"
[    27.497] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.497] (II) Module fb: vendor="X.Org Foundation"
[    27.497] 	compiled for 1.10.1, module version = 1.0.0
[    27.497] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.497] (II) UnloadModule: "vesa"
[    27.497] (II) Unloading vesa
[    27.497] (II) UnloadModule: "fbdev"
[    27.497] (II) Unloading fbdev
[    27.497] (II) UnloadModule: "fbdevhw"
[    27.497] (II) Unloading fbdevhw
[    27.497] (==) Depth 24 pixmap format is 32 bpp
[    27.497] (==) intel(0): VideoRam: 262144 KB
[    27.497] (II) intel(0): [DRI2] Setup complete
[    27.497] (II) intel(0): [DRI2]   DRI driver: i965
[    27.498] (II) intel(0): Allocated new frame buffer 1280x768 stride 5120, tiled
[    27.510] (II) UXA(0): Driver registered support for the following operations:
[    27.510] (II)         solid
[    27.510] (II)         copy
[    27.510] (II)         composite (RENDER acceleration)
[    27.510] (II)         put_image
[    27.510] (II)         get_image
[    27.510] (==) intel(0): Backing store disabled
[    27.510] (==) intel(0): Silken mouse enabled
[    27.510] (II) intel(0): Initializing HW Cursor
[    27.774] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.774] (==) intel(0): DPMS enabled
[    27.774] (==) intel(0): Intel XvMC decoder enabled
[    27.774] (II) intel(0): Set up textured video
[    27.774] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    27.774] (II) intel(0): direct rendering: DRI2 Enabled
[    27.774] (==) intel(0): hotplug detection: "enabled"
[    27.775] (--) RandR disabled
[    27.775] (II) Initializing built-in extension Generic Event Extension
[    27.775] (II) Initializing built-in extension SHAPE
[    27.775] (II) Initializing built-in extension MIT-SHM
[    27.775] (II) Initializing built-in extension XInputExtension
[    27.775] (II) Initializing built-in extension XTEST
[    27.775] (II) Initializing built-in extension BIG-REQUESTS
[    27.775] (II) Initializing built-in extension SYNC
[    27.775] (II) Initializing built-in extension XKEYBOARD
[    27.775] (II) Initializing built-in extension XC-MISC
[    27.775] (II) Initializing built-in extension SECURITY
[    27.775] (II) Initializing built-in extension XINERAMA
[    27.775] (II) Initializing built-in extension XFIXES
[    27.775] (II) Initializing built-in extension RENDER
[    27.775] (II) Initializing built-in extension RANDR
[    27.775] (II) Initializing built-in extension COMPOSITE
[    27.775] (II) Initializing built-in extension DAMAGE
[    27.775] (II) Initializing built-in extension GESTURE
[    27.782] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[    27.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.785] (II) AIGLX: enabled GLX_INTEL_swap_event
[    27.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    27.785] (II) AIGLX: enabled GLX_SGI_make_current_read
[    27.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    27.785] (II) AIGLX: Loaded and initialized i965
[    27.785] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.786] (II) intel(0): Setting screen physical size to 338 x 203
[    27.794] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    27.804] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    27.804] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.804] (II) LoadModule: "evdev"
[    27.804] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.804] (II) Module evdev: vendor="X.Org Foundation"
[    27.804] 	compiled for 1.10.0.902, module version = 2.6.0
[    27.804] 	Module class: X.Org XInput Driver
[    27.804] 	ABI class: X.Org XInput driver, version 12.3
[    27.804] (II) Using input driver 'evdev' for 'Power Button'
[    27.804] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.804] (**) Power Button: always reports core events
[    27.804] (**) Power Button: Device: "/dev/input/event1"
[    27.840] (--) Power Button: Found keys
[    27.840] (II) Power Button: Configuring as keyboard
[    27.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    27.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    27.840] (**) Option "xkb_rules" "evdev"
[    27.840] (**) Option "xkb_model" "pc105"
[    27.840] (**) Option "xkb_layout" "de"
[    27.842] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[    27.843] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    27.843] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.843] (II) Using input driver 'evdev' for 'Video Bus'
[    27.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.843] (**) Video Bus: always reports core events
[    27.843] (**) Video Bus: Device: "/dev/input/event4"
[    27.910] (--) Video Bus: Found keys
[    27.910] (II) Video Bus: Configuring as keyboard
[    27.910] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    27.910] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    27.910] (**) Option "xkb_rules" "evdev"
[    27.910] (**) Option "xkb_model" "pc105"
[    27.910] (**) Option "xkb_layout" "de"
[    27.912] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    27.912] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.912] (II) Using input driver 'evdev' for 'Power Button'
[    27.912] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.912] (**) Power Button: always reports core events
[    27.912] (**) Power Button: Device: "/dev/input/event0"
[    27.980] (--) Power Button: Found keys
[    27.980] (II) Power Button: Configuring as keyboard
[    27.980] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    27.980] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    27.980] (**) Option "xkb_rules" "evdev"
[    27.980] (**) Option "xkb_model" "pc105"
[    27.980] (**) Option "xkb_layout" "de"
[    27.982] (II) config/udev: Adding input device USB Touchscreen 6615:0001 (/dev/input/event2)
[    27.982] (**) USB Touchscreen 6615:0001: Applying InputClass "evdev touchscreen catchall"
[    27.982] (**) USB Touchscreen 6615:0001: Applying InputClass "Touchscreen"
[    27.982] (II) Using input driver 'evdev' for 'USB Touchscreen 6615:0001'
[    27.982] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.982] (**) USB Touchscreen 6615:0001: always reports core events
[    27.982] (**) USB Touchscreen 6615:0001: Device: "/dev/input/event2"
[    28.030] (**) USB Touchscreen 6615:0001: ButtonMapping '1 0 0'
[    28.030] (--) USB Touchscreen 6615:0001: Found absolute axes
[    28.030] (II) evdev-grail: failed to open grail, no gesture support
[    28.030] (--) USB Touchscreen 6615:0001: Found x and y absolute axes
[    28.030] (--) USB Touchscreen 6615:0001: Found absolute touchscreen
[    28.030] (**) Option "InvertX" "on"
[    28.030] (**) Option "InvertY" "on"
[    28.030] (**) Option "SwapAxes" "on"
[    28.030] (EE) USB Touchscreen 6615:0001: Insufficient calibration factors (0). Ignoring calibration
[    28.030] (II) USB Touchscreen 6615:0001: Configuring as touchscreen
[    28.030] (**) USB Touchscreen 6615:0001: YAxisMapping: buttons 4 and 5
[    28.030] (**) USB Touchscreen 6615:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2/event2"
[    28.030] (II) XINPUT: Adding extended input device "USB Touchscreen 6615:0001" (type: TOUCHSCREEN)
[    28.030] (II) USB Touchscreen 6615:0001: initialized for absolute axes.
[    28.030] (**) Option "AccelerationScheme" "none"
[    28.030] (**) USB Touchscreen 6615:0001: (accel) selected scheme none/0
[    28.030] (**) USB Touchscreen 6615:0001: (accel) acceleration factor: 2.000
[    28.030] (**) USB Touchscreen 6615:0001: (accel) acceleration threshold: 4
[    28.030] (II) config/udev: Adding input device USB Touchscreen 6615:0001 (/dev/input/mouse0)
[    28.030] (**) USB Touchscreen 6615:0001: Applying InputClass "Touchscreen"
[    28.030] (II) Using input driver 'evdev' for 'USB Touchscreen 6615:0001'
[    28.030] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.030] (**) USB Touchscreen 6615:0001: always reports core events
[    28.030] (**) USB Touchscreen 6615:0001: Device: "/dev/input/mouse0"
[    28.041] (EE) USB Touchscreen 6615:0001: Couldn't open mtdev device
[    28.041] (**) USB Touchscreen 6615:0001: ButtonMapping '1 0 0'
[    28.041] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
[    28.060] (EE) PreInit returned 8 for "USB Touchscreen 6615:0001"
[    28.060] (II) UnloadModule: "evdev"
[    28.060] (II) Unloading evdev
[    28.061] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event5)
[    28.061] (II) No input driver/identifier specified (ignoring)
[    28.062] (II) config/udev: Adding input device USB Touchscreen 6615:0001 (/dev/input/event3)
[    28.062] (**) USB Touchscreen 6615:0001: Applying InputClass "evdev touchscreen catchall"
[    28.062] (**) USB Touchscreen 6615:0001: Applying InputClass "Touchscreen"
[    28.062] (II) Using input driver 'evdev' for 'USB Touchscreen 6615:0001'
[    28.062] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.062] (**) USB Touchscreen 6615:0001: always reports core events
[    28.062] (**) USB Touchscreen 6615:0001: Device: "/dev/input/event3"
[    28.110] (**) USB Touchscreen 6615:0001: ButtonMapping '1 0 0'
[    28.110] (--) USB Touchscreen 6615:0001: Found absolute axes
[    28.110] (II) evdev-grail: failed to open grail, no gesture support
[    28.110] (--) USB Touchscreen 6615:0001: Found x and y absolute axes
[    28.110] (--) USB Touchscreen 6615:0001: Found absolute touchscreen
[    28.110] (**) Option "InvertX" "on"
[    28.110] (**) Option "InvertY" "on"
[    28.110] (**) Option "SwapAxes" "on"
[    28.110] (EE) USB Touchscreen 6615:0001: Insufficient calibration factors (0). Ignoring calibration
[    28.110] (II) USB Touchscreen 6615:0001: Configuring as touchscreen
[    28.110] (**) USB Touchscreen 6615:0001: YAxisMapping: buttons 4 and 5
[    28.110] (**) USB Touchscreen 6615:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.110] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input3/event3"
[    28.110] (II) XINPUT: Adding extended input device "USB Touchscreen 6615:0001" (type: TOUCHSCREEN)
[    28.110] (II) USB Touchscreen 6615:0001: initialized for absolute axes.
[    28.110] (**) Option "AccelerationScheme" "none"
[    28.110] (**) USB Touchscreen 6615:0001: (accel) selected scheme none/0
[    28.110] (**) USB Touchscreen 6615:0001: (accel) acceleration factor: 2.000
[    28.110] (**) USB Touchscreen 6615:0001: (accel) acceleration threshold: 4
[    28.110] (II) config/udev: Adding input device USB Touchscreen 6615:0001 (/dev/input/mouse1)
[    28.110] (**) USB Touchscreen 6615:0001: Applying InputClass "Touchscreen"
[    28.110] (II) Using input driver 'evdev' for 'USB Touchscreen 6615:0001'
[    28.110] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.110] (**) USB Touchscreen 6615:0001: always reports core events
[    28.110] (**) USB Touchscreen 6615:0001: Device: "/dev/input/mouse1"
[    28.110] (EE) USB Touchscreen 6615:0001: Couldn't open mtdev device
[    28.110] (**) USB Touchscreen 6615:0001: ButtonMapping '1 0 0'
[    28.110] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
[    28.110] (EE) PreInit returned 8 for "USB Touchscreen 6615:0001"
[    28.111] (II) UnloadModule: "evdev"
[    28.111] (II) Unloading evdev
[    28.328] (II) intel(0): EDID vendor "CLT", prod id 4134
[    28.328] (II) intel(0): Using EDID range info for horizontal sync
[    28.328] (II) intel(0): Using EDID range info for vertical refresh
[    28.328] (II) intel(0): Printing DDC gathered Modelines:
[    28.328] (II) intel(0): Modeline "1920x1080"x0.0  150.00  1920 1960 2000 2048  1080 1082 1087 1112 +hsync +vsync (73.2 kHz)
[    28.328] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    28.328] (II) intel(0): Modeline "1920x1536"x60.0  250.17  1920 2064 2272 2624  1536 1537 1540 1589 -hsync +vsync (95.3 kHz)
[    28.328] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    28.328] (II) intel(0): Modeline "1400x787"x60.0   89.58  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    28.328] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    28.328] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    28.341] (II) intel(0): Allocated new frame buffer 1088x1920 stride 4608, tiled
[    28.373] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[    28.768] (II) intel(0): EDID vendor "CLT", prod id 4134
[    28.768] (II) intel(0): Using hsync ranges from config file
[    28.768] (II) intel(0): Using vrefresh ranges from config file
[    28.768] (II) intel(0): Printing DDC gathered Modelines:
[    28.768] (II) intel(0): Modeline "1920x1080"x0.0  150.00  1920 1960 2000 2048  1080 1082 1087 1112 +hsync +vsync (73.2 kHz)
[    28.768] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    28.768] (II) intel(0): Modeline "1920x1536"x60.0  250.17  1920 2064 2272 2624  1536 1537 1540 1589 -hsync +vsync (95.3 kHz)
[    28.768] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    28.768] (II) intel(0): Modeline "1400x787"x60.0   89.58  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    28.768] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    28.768] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    28.774] (II) intel(0): Allocated new frame buffer 1088x3840 stride 4608, tiled
[    28.817] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[    29.069] (II) intel(0): EDID vendor "CLT", prod id 4134
[    29.069] (II) intel(0): Using hsync ranges from config file
[    29.069] (II) intel(0): Using vrefresh ranges from config file
[    29.069] (II) intel(0): Printing DDC gathered Modelines:
[    29.069] (II) intel(0): Modeline "1920x1080"x0.0  150.00  1920 1960 2000 2048  1080 1082 1087 1112 +hsync +vsync (73.2 kHz)
[    29.069] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    29.069] (II) intel(0): Modeline "1920x1536"x60.0  250.17  1920 2064 2272 2624  1536 1537 1540 1589 -hsync +vsync (95.3 kHz)
[    29.069] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    29.069] (II) intel(0): Modeline "1400x787"x60.0   89.58  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    29.069] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    29.069] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    29.081] (II) intel(0): Allocated new frame buffer 1088x1920 stride 4608, tiled
[    29.310] (II) intel(0): EDID vendor "CLT", prod id 4134
[    29.310] (II) intel(0): Using hsync ranges from config file
[    29.310] (II) intel(0): Using vrefresh ranges from config file
[    29.310] (II) intel(0): Printing DDC gathered Modelines:
[    29.310] (II) intel(0): Modeline "1920x1080"x0.0  150.00  1920 1960 2000 2048  1080 1082 1087 1112 +hsync +vsync (73.2 kHz)
[    29.310] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    29.310] (II) intel(0): Modeline "1920x1536"x60.0  250.17  1920 2064 2272 2624  1536 1537 1540 1589 -hsync +vsync (95.3 kHz)
[    29.310] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    29.310] (II) intel(0): Modeline "1400x787"x60.0   89.58  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    29.310] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    29.310] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    29.508] (II) intel(0): EDID vendor "CLT", prod id 4134
[    29.509] (II) intel(0): Using hsync ranges from config file
[    29.509] (II) intel(0): Using vrefresh ranges from config file
[    29.509] (II) intel(0): Printing DDC gathered Modelines:
[    29.509] (II) intel(0): Modeline "1920x1080"x0.0  150.00  1920 1960 2000 2048  1080 1082 1087 1112 +hsync +vsync (73.2 kHz)
[    29.509] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    29.509] (II) intel(0): Modeline "1920x1536"x60.0  250.17  1920 2064 2272 2624  1536 1537 1540 1589 -hsync +vsync (95.3 kHz)
[    29.509] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    29.509] (II) intel(0): Modeline "1400x787"x60.0   89.58  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    29.509] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    29.509] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    29.708] (II) intel(0): EDID vendor "CLT", prod id 4134
[    29.708] (II) intel(0): Using hsync ranges from config file
[    29.708] (II) intel(0): Using vrefresh ranges from config file
[    29.708] (II) intel(0): Printing DDC gathered Modelines:
[    29.708] (II) intel(0): Modeline "1920x1080"x0.0  150.00  1920 1960 2000 2048  1080 1082 1087 1112 +hsync +vsync (73.2 kHz)
[    29.708] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    29.708] (II) intel(0): Modeline "1920x1536"x60.0  250.17  1920 2064 2272 2624  1536 1537 1540 1589 -hsync +vsync (95.3 kHz)
[    29.708] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    29.708] (II) intel(0): Modeline "1400x787"x60.0   89.58  1400 1472 1616 1832  787 788 791 815 -hsync +vsync (48.9 kHz)
[    29.708] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    29.708] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    29.714] (II) intel(0): Allocated new frame buffer 1088x3840 stride 4608, tiled
[    29.744] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled