[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=01cc32ca-6ea0-4e87-aa5f-23c5e74936ae ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3R/P35-DS3R, BIOS F13 06/19/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 130000000 mask FF0000000 uncachable [ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5160] f5160 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ cfeda000-cfee0000 [ 0.000000] RAMDISK: 35b74000 - 36db2000 [ 0.000000] ACPI: RSDP 00000000000f6b50 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee3180 04B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: HPET 00000000cfee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s84416 r8192 d22080 u524288 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031145 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=01cc32ca-6ea0-4e87-aa5f-23c5e74936ae ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4034676k/4980736k available (5940k kernel code, 788036k absent, 158024k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.891 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.78 BogoMIPS (lpj=29998910) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000027] Security Framework initialized [ 0.000043] AppArmor: AppArmor initialized [ 0.000045] Yama: becoming mindful. [ 0.010309] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012119] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012987] Mount-cache hash table entries: 256 [ 0.013128] Initializing cgroup subsys ns [ 0.013133] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.013135] Initializing cgroup subsys cpuacct [ 0.013139] Initializing cgroup subsys memory [ 0.013146] Initializing cgroup subsys devices [ 0.013148] Initializing cgroup subsys freezer [ 0.013150] Initializing cgroup subsys net_cls [ 0.013152] Initializing cgroup subsys blkio [ 0.013183] CPU: Physical Processor ID: 0 [ 0.013185] CPU: Processor Core ID: 0 [ 0.013187] mce: CPU supports 6 MCE banks [ 0.013194] CPU0: Thermal monitoring enabled (TM2) [ 0.013197] using mwait in idle threads. [ 0.015376] ACPI: Core revision 20110112 [ 0.018087] ftrace: allocating 24314 entries in 96 pages [ 0.020047] Setting APIC routing to flat [ 0.020343] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.127345] CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b [ 0.130000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.130000] PEBS disabled due to CPU errata. [ 0.130000] ... version: 2 [ 0.130000] ... bit width: 40 [ 0.130000] ... generic registers: 2 [ 0.130000] ... value mask: 000000ffffffffff [ 0.130000] ... max period: 000000007fffffff [ 0.130000] ... fixed-purpose events: 3 [ 0.130000] ... event mask: 0000000700000003 [ 0.130000] Booting Node 0, Processors #1 [ 0.290016] Brought up 2 CPUs [ 0.290019] Total of 2 processors activated (11999.83 BogoMIPS). [ 0.290578] devtmpfs: initialized [ 0.290722] print_constraints: dummy: [ 0.290743] Time: 13:45:16 Date: 06/25/11 [ 0.290772] NET: Registered protocol family 16 [ 0.290795] Trying to unpack rootfs image as initramfs... [ 0.290874] ACPI: bus type pci registered [ 0.290932] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.290934] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.301250] PCI: Using configuration type 1 for base access [ 0.310056] bio: create slab at 0 [ 0.310810] ACPI: EC: Look up EC in DSDT [ 0.314326] ACPI: Interpreter enabled [ 0.314331] ACPI: (supports S0 S3 S4 S5) [ 0.314347] ACPI: Using IOAPIC for interrupt routing [ 0.318087] ACPI: No dock devices found. [ 0.318089] HEST: Table not found. [ 0.318092] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.318141] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.318231] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.318233] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.318235] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.318237] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.318239] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] [ 0.318249] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 [ 0.318282] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604 [ 0.318308] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.318310] pci 0000:00:01.0: PME# disabled [ 0.318343] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.318381] pci 0000:00:1a.0: reg 20: [io 0xe100-0xe11f] [ 0.318421] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.318458] pci 0000:00:1a.1: reg 20: [io 0xe200-0xe21f] [ 0.318496] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.318533] pci 0000:00:1a.2: reg 20: [io 0xe000-0xe01f] [ 0.318575] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.318590] pci 0000:00:1a.7: reg 10: [mem 0xea205000-0xea2053ff] [ 0.318661] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.318674] pci 0000:00:1b.0: reg 10: [mem 0xea200000-0xea203fff 64bit] [ 0.318720] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.318723] pci 0000:00:1b.0: PME# disabled [ 0.318739] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.318787] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.318790] pci 0000:00:1c.0: PME# disabled [ 0.318809] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 0.318855] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.318859] pci 0000:00:1c.3: PME# disabled [ 0.318876] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 [ 0.318922] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.318925] pci 0000:00:1c.4: PME# disabled [ 0.318946] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.318984] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f] [ 0.319022] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.319060] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f] [ 0.319097] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.319135] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f] [ 0.319176] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.319191] pci 0000:00:1d.7: reg 10: [mem 0xea204000-0xea2043ff] [ 0.319258] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.319310] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601 [ 0.319385] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.319388] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.319420] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101 [ 0.319433] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.319440] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.319447] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.319454] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.319461] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f] [ 0.319468] pci 0000:00:1f.2: reg 24: [io 0xfc00-0xfc0f] [ 0.319502] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.319515] pci 0000:00:1f.3: reg 10: [mem 0xea206000-0xea2060ff 64bit] [ 0.319533] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.319561] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 [ 0.319575] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707] [ 0.319582] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803] [ 0.319589] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907] [ 0.319596] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03] [ 0.319603] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f] [ 0.319610] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f] [ 0.319668] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300 [ 0.319677] pci 0000:01:00.0: reg 10: [mem 0xe6000000-0xe6ffffff] [ 0.319687] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.319696] pci 0000:01:00.0: reg 1c: [mem 0xe4000000-0xe5ffffff 64bit] [ 0.319702] pci 0000:01:00.0: reg 24: [io 0xb000-0xb07f] [ 0.319709] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.319745] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.319748] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.319751] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.319755] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.319790] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.319793] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.319797] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.319802] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.319851] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101 [ 0.319934] pci 0000:03:00.0: reg 24: [mem 0xea000000-0xea001fff] [ 0.319975] pci 0000:03:00.0: PME# supported from D3hot [ 0.319980] pci 0000:03:00.0: PME# disabled [ 0.320028] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101 [ 0.320051] pci 0000:03:00.1: reg 10: [io 0xc000-0xc007] [ 0.320063] pci 0000:03:00.1: reg 14: [io 0xc100-0xc103] [ 0.320076] pci 0000:03:00.1: reg 18: [io 0xc200-0xc207] [ 0.320089] pci 0000:03:00.1: reg 1c: [io 0xc300-0xc303] [ 0.320102] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f] [ 0.320167] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.320179] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.320182] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.320186] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xea0fffff] [ 0.320191] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.320246] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 [ 0.320263] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.320292] pci 0000:04:00.0: reg 18: [mem 0xe9000000-0xe9000fff 64bit] [ 0.320326] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.320369] pci 0000:04:00.0: supports D1 D2 [ 0.320371] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.320376] pci 0000:04:00.0: PME# disabled [ 0.320396] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.320405] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 0.320408] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.320412] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.320417] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.320441] pci 0000:05:00.0: [109e:036e] type 0 class 0x000400 [ 0.320453] pci 0000:05:00.0: reg 10: [mem 0xea100000-0xea100fff pref] [ 0.320509] pci 0000:05:00.1: [109e:0878] type 0 class 0x000480 [ 0.320521] pci 0000:05:00.1: reg 10: [mem 0xea101000-0xea101fff pref] [ 0.320610] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.320614] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.320617] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.320622] pci 0000:00:1e.0: bridge window [mem 0xea100000-0xea1fffff 64bit pref] [ 0.320625] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.320627] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.320629] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.320631] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.320633] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.320653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.320742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.320773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.320809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.320837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.320920] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.329107] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.329149] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.329190] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.329230] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.329270] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.329309] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.329348] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.329387] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.329491] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.329495] vgaarb: loaded [ 0.329657] SCSI subsystem initialized [ 0.329716] libata version 3.00 loaded. [ 0.329755] usbcore: registered new interface driver usbfs [ 0.329764] usbcore: registered new interface driver hub [ 0.329787] usbcore: registered new device driver usb [ 0.329873] wmi: Mapper loaded [ 0.329875] PCI: Using ACPI for IRQ routing [ 0.329877] PCI: pci_cache_line_size set to 64 bytes [ 0.329964] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.329966] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff [ 0.330062] NetLabel: Initializing [ 0.330064] NetLabel: domain hash size = 128 [ 0.330065] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.330075] NetLabel: unlabeled traffic allowed by default [ 0.330104] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.330108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.330113] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.340058] Switching to clocksource hpet [ 0.346507] AppArmor: AppArmor Filesystem Enabled [ 0.346535] pnp: PnP ACPI init [ 0.346551] ACPI: bus type pnp registered [ 0.346637] pnp 00:00: [bus 00-3f] [ 0.346639] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.346641] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.346643] pnp 00:00: [io 0x0d00-0xffff window] [ 0.346645] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.346647] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.346648] pnp 00:00: [mem 0xcff00000-0xfebfffff window] [ 0.346707] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.346773] pnp 00:01: [io 0x0010-0x001f] [ 0.346774] pnp 00:01: [io 0x0022-0x003f] [ 0.346776] pnp 00:01: [io 0x0044-0x005f] [ 0.346777] pnp 00:01: [io 0x0062-0x0063] [ 0.346779] pnp 00:01: [io 0x0065-0x006f] [ 0.346780] pnp 00:01: [io 0x0074-0x007f] [ 0.346782] pnp 00:01: [io 0x0091-0x0093] [ 0.346784] pnp 00:01: [io 0x00a2-0x00bf] [ 0.346785] pnp 00:01: [io 0x00e0-0x00ef] [ 0.346787] pnp 00:01: [io 0x04d0-0x04d1] [ 0.346788] pnp 00:01: [io 0x0290-0x029f] [ 0.346792] pnp 00:01: [io 0x0800-0x087f] [ 0.346794] pnp 00:01: [io 0x0290-0x0294] [ 0.346796] pnp 00:01: [io 0x0880-0x088f] [ 0.346872] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.346874] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.346876] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.346878] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.346880] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.346883] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.346893] pnp 00:02: [dma 4] [ 0.346895] pnp 00:02: [io 0x0000-0x000f] [ 0.346897] pnp 00:02: [io 0x0080-0x0090] [ 0.346898] pnp 00:02: [io 0x0094-0x009f] [ 0.346900] pnp 00:02: [io 0x00c0-0x00df] [ 0.346928] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.346969] pnp 00:03: [irq 0 disabled] [ 0.346980] pnp 00:03: [irq 8] [ 0.346981] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.347008] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.347030] pnp 00:04: [io 0x0070-0x0073] [ 0.347061] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.347069] pnp 00:05: [io 0x0061] [ 0.347095] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.347103] pnp 00:06: [io 0x00f0-0x00ff] [ 0.347108] pnp 00:06: [irq 13] [ 0.347134] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.347232] pnp 00:07: [io 0x03f0-0x03f5] [ 0.347234] pnp 00:07: [io 0x03f7] [ 0.347239] pnp 00:07: [irq 6] [ 0.347240] pnp 00:07: [dma 2] [ 0.347279] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.347411] pnp 00:08: [io 0x03f8-0x03ff] [ 0.347416] pnp 00:08: [irq 4] [ 0.347463] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.347615] pnp 00:09: [io 0x0378-0x037f] [ 0.347619] pnp 00:09: [irq 7] [ 0.347666] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.347739] pnp 00:0a: [io 0x0060] [ 0.347744] pnp 00:0a: [io 0x0064] [ 0.347748] pnp 00:0a: [irq 1] [ 0.347777] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.347805] pnp 00:0b: [io 0x0400-0x04bf] [ 0.347857] system 00:0b: [io 0x0400-0x04bf] has been reserved [ 0.347860] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348019] pnp 00:0c: [mem 0xe0000000-0xe3ffffff] [ 0.348075] system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved [ 0.348078] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348199] pnp 00:0d: [mem 0x000cd600-0x000cffff] [ 0.348201] pnp 00:0d: [mem 0x000f0000-0x000f7fff] [ 0.348203] pnp 00:0d: [mem 0x000f8000-0x000fbfff] [ 0.348204] pnp 00:0d: [mem 0x000fc000-0x000fffff] [ 0.348206] pnp 00:0d: [mem 0xcfee0000-0xcfefffff] [ 0.348208] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.348209] pnp 00:0d: [mem 0x00100000-0xcfedffff] [ 0.348211] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.348213] pnp 00:0d: [mem 0xfed10000-0xfed1dfff] [ 0.348214] pnp 00:0d: [mem 0xfed20000-0xfed8ffff] [ 0.348216] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.348218] pnp 00:0d: [mem 0xffb00000-0xffb7ffff] [ 0.348219] pnp 00:0d: [mem 0xfff00000-0xffffffff] [ 0.348221] pnp 00:0d: [mem 0x000e0000-0x000effff] [ 0.348285] system 00:0d: [mem 0x000cd600-0x000cffff] has been reserved [ 0.348288] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.348290] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.348292] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.348295] system 00:0d: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.348297] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.348299] system 00:0d: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.348301] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.348304] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.348306] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.348308] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.348310] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.348312] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved [ 0.348314] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved [ 0.348317] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.348333] pnp 00:0e: [mem 0xffb80000-0xffbfffff] [ 0.348370] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active) [ 0.348375] pnp: PnP ACPI: found 15 devices [ 0.348377] ACPI: ACPI bus type pnp unregistered [ 0.349791] Switched to NOHz mode on CPU #0 [ 0.349860] Switched to NOHz mode on CPU #1 [ 0.354276] pci 0000:00:1c.0: BAR 14: assigned [mem 0xea300000-0xea4fffff] [ 0.354280] pci 0000:00:1c.0: BAR 15: assigned [mem 0xea500000-0xea6fffff 64bit pref] [ 0.354284] pci 0000:00:1c.3: BAR 15: assigned [mem 0xea700000-0xea8fffff 64bit pref] [ 0.354287] pci 0000:00:1c.4: BAR 15: assigned [mem 0xea900000-0xeaafffff pref] [ 0.354291] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe707ffff pref] [ 0.354293] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.354296] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.354299] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.354301] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.354305] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.354307] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.354311] pci 0000:00:1c.0: bridge window [mem 0xea300000-0xea4fffff] [ 0.354315] pci 0000:00:1c.0: bridge window [mem 0xea500000-0xea6fffff 64bit pref] [ 0.354320] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.354322] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.354326] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xea0fffff] [ 0.354330] pci 0000:00:1c.3: bridge window [mem 0xea700000-0xea8fffff 64bit pref] [ 0.354335] pci 0000:04:00.0: BAR 6: assigned [mem 0xea900000-0xea91ffff pref] [ 0.354337] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 0.354339] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.354343] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.354347] pci 0000:00:1c.4: bridge window [mem 0xea900000-0xeaafffff pref] [ 0.354352] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.354353] pci 0000:00:1e.0: bridge window [io disabled] [ 0.354357] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.354360] pci 0000:00:1e.0: bridge window [mem 0xea100000-0xea1fffff 64bit pref] [ 0.354379] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354383] pci 0000:00:01.0: setting latency timer to 64 [ 0.354390] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354393] pci 0000:00:1c.0: setting latency timer to 64 [ 0.354403] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.354407] pci 0000:00:1c.3: setting latency timer to 64 [ 0.354412] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354416] pci 0000:00:1c.4: setting latency timer to 64 [ 0.354421] pci 0000:00:1e.0: setting latency timer to 64 [ 0.354425] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.354426] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.354428] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354430] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.354432] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.354434] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.354436] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff] [ 0.354438] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.354440] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.354442] pci_bus 0000:02: resource 1 [mem 0xea300000-0xea4fffff] [ 0.354444] pci_bus 0000:02: resource 2 [mem 0xea500000-0xea6fffff 64bit pref] [ 0.354446] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.354447] pci_bus 0000:03: resource 1 [mem 0xea000000-0xea0fffff] [ 0.354449] pci_bus 0000:03: resource 2 [mem 0xea700000-0xea8fffff 64bit pref] [ 0.354451] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.354453] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff] [ 0.354455] pci_bus 0000:04: resource 2 [mem 0xea900000-0xeaafffff pref] [ 0.354457] pci_bus 0000:05: resource 2 [mem 0xea100000-0xea1fffff 64bit pref] [ 0.354459] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.354461] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.354463] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354464] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.354466] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.354501] NET: Registered protocol family 2 [ 0.354631] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.355611] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.359217] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.359669] TCP: Hash tables configured (established 524288 bind 65536) [ 0.359671] TCP reno registered [ 0.359682] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.359715] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.359848] NET: Registered protocol family 1 [ 0.360044] pci 0000:01:00.0: Boot video device [ 0.360058] PCI: CLS 32 bytes, default 64 [ 0.360061] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.360063] Placing 64MB software IO TLB between ffff8800cbc00000 - ffff8800cfc00000 [ 0.360065] software IO TLB at phys 0xcbc00000 - 0xcfc00000 [ 0.360377] audit: initializing netlink socket (disabled) [ 0.360388] type=2000 audit(1309009516.360:1): initialized [ 0.371313] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.372819] VFS: Disk quotas dquot_6.5.2 [ 0.372866] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.373383] fuse init (API version 7.16) [ 0.373456] msgmni has been set to 7880 [ 0.373643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.373664] io scheduler noop registered [ 0.373665] io scheduler deadline registered [ 0.373698] io scheduler cfq registered (default) [ 0.373796] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.373824] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.373863] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.373894] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.373945] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.373976] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.374025] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.374056] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.374122] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.374140] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.374181] intel_idle: MWAIT substates: 0x220 [ 0.374183] intel_idle: does not run on family 6 model 15 [ 0.374261] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.374266] ACPI: Power Button [PWRB] [ 0.374316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.374319] ACPI: Power Button [PWRF] [ 0.374472] ACPI: acpi_idle registered with cpuidle [ 0.375680] ERST: Table is not found! [ 0.375734] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.396234] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.593644] Freeing initrd memory: 18680k freed [ 0.681869] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.682192] Linux agpgart interface v0.103 [ 0.683279] brd: module loaded [ 0.683729] loop: module loaded [ 0.683806] i2c-core: driver [adp5520] using legacy suspend method [ 0.683807] i2c-core: driver [adp5520] using legacy resume method [ 0.683897] ata_piix 0000:00:1f.2: version 2.13 [ 0.683909] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.683913] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.683951] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.684222] scsi0 : ata_piix [ 0.684295] scsi1 : ata_piix [ 0.684665] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.684670] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.684686] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.684690] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.684726] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.684912] scsi2 : ata_piix [ 0.684965] scsi3 : ata_piix [ 0.685332] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.685335] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.685391] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 0.685397] pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.685420] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.685432] pata_acpi 0000:03:00.1: PCI INT B disabled [ 0.685677] Fixed MDIO Bus: probed [ 0.685702] PPP generic driver version 2.4.2 [ 0.685737] tun: Universal TUN/TAP device driver, 1.6 [ 0.685739] tun: (C) 1999-2004 Max Krasnyansky [ 0.685809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.685826] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.685844] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.685846] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.685881] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.733942] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.733953] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xea205000 [ 0.750022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.750152] hub 1-0:1.0: USB hub found [ 0.750157] hub 1-0:1.0: 6 ports detected [ 0.750240] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.750248] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.750251] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.750282] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.754205] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.754216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea204000 [ 0.770022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.770142] hub 2-0:1.0: USB hub found [ 0.770146] hub 2-0:1.0: 6 ports detected [ 0.770230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.770241] uhci_hcd: USB Universal Host Controller Interface driver [ 0.770284] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.770289] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.770291] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.770319] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.770360] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 0.770457] hub 3-0:1.0: USB hub found [ 0.770461] hub 3-0:1.0: 2 ports detected [ 0.770517] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.770522] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.770525] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.770557] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.770598] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 0.770692] hub 4-0:1.0: USB hub found [ 0.770696] hub 4-0:1.0: 2 ports detected [ 0.770748] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.770753] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.770756] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.770784] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.780047] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 0.780166] hub 5-0:1.0: USB hub found [ 0.780171] hub 5-0:1.0: 2 ports detected [ 0.780239] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.780244] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.780247] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.780277] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.790064] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.790192] hub 6-0:1.0: USB hub found [ 0.790197] hub 6-0:1.0: 2 ports detected [ 0.790262] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.790268] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.790271] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.790301] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.790335] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 0.790428] hub 7-0:1.0: USB hub found [ 0.790431] hub 7-0:1.0: 2 ports detected [ 0.790485] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.790489] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.790492] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.790531] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.790566] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 0.790660] hub 8-0:1.0: USB hub found [ 0.790663] hub 8-0:1.0: 2 ports detected [ 0.790760] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.790762] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.790875] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.790956] mousedev: PS/2 mouse device common for all mice [ 0.791063] rtc_cmos 00:04: RTC can wake from S4 [ 0.791110] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.791130] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.791210] device-mapper: uevent: version 1.0.3 [ 0.791270] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.791319] device-mapper: multipath: version 1.2.0 loaded [ 0.791321] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.791410] cpuidle: using governor ladder [ 0.791412] cpuidle: using governor menu [ 0.791605] TCP cubic registered [ 0.791700] NET: Registered protocol family 10 [ 0.792084] NET: Registered protocol family 17 [ 0.792097] Registering the dns_resolver key type [ 0.792197] PM: Hibernation image not present or could not be loaded. [ 0.792214] registered taskstats version 1 [ 0.792468] Magic number: 15:492:787 [ 0.792552] rtc_cmos 00:04: setting system clock to 2011-06-25 13:45:17 UTC (1309009517) [ 0.792555] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.792556] EDD information not available. [ 0.808312] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.070034] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.190055] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.190154] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.210327] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133 [ 1.210330] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.221541] hub 1-3:1.0: USB hub found [ 1.221887] hub 1-3:1.0: 4 ports detected [ 1.230223] ata3.00: ATAPI: ATAPI DVD D DH16D2S, EP53, max UDMA/100 [ 1.250331] ata4.00: configured for UDMA/133 [ 1.290155] ata3.00: configured for UDMA/100 [ 1.360023] Refined TSC clocksource calibration: 2999.999 MHz. [ 1.360026] Switching to clocksource tsc [ 1.390692] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.390704] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.400015] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.550063] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.550074] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.551675] hub 2-1:1.0: USB hub found [ 1.552024] hub 2-1:1.0: 4 ports detected [ 1.570928] ata2.00: HPA detected: current 312579695, native 312581808 [ 1.570933] ata2.00: ATA-8: WDC WD1600AAJS-00L7A0, 01.03E01, max UDMA/133 [ 1.570936] ata2.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.590951] ata2.00: configured for UDMA/133 [ 1.591056] scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5 [ 1.591182] sd 1:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB) [ 1.591194] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.591223] sd 1:0:0:0: [sda] Write Protect is off [ 1.591226] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.591246] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.592599] scsi 2:0:0:0: CD-ROM ATAPI DVD D DH16D2S EP53 PQ: 0 ANSI: 5 [ 1.595060] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.595063] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.595155] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.595209] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.595327] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5 [ 1.595412] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.595427] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.595455] sd 3:0:0:0: [sdb] Write Protect is off [ 1.595457] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.595480] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.603555] sda: sda1 sda2 sda3 [ 1.603618] sda: p3 size 306296832 extends beyond EOD, enabling native capacity [ 1.603636] ata2.00: hard resetting link [ 1.608089] sdb: sdb2 [ 1.608292] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.950021] ata2.01: hard resetting link [ 1.950060] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 2.410019] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 2.460065] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.460075] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.500122] ata2.00: n_sectors mismatch 312579695 != 312581808 [ 2.500125] ata2.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated [ 2.540905] ata2.00: configured for UDMA/133 [ 2.540909] ata2: EH complete [ 2.540942] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.541185] sda: detected capacity change from 160040803840 to 160041885696 [ 2.553537] sda: sda1 sda2 sda3 [ 2.553786] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.555237] Freeing unused kernel memory: 956k freed [ 2.555461] Write protecting the kernel read-only data: 10240k [ 2.556101] Freeing unused kernel memory: 184k freed [ 2.560360] Freeing unused kernel memory: 1444k freed [ 2.576692] <30>udev[73]: starting version 167 [ 2.647787] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.647807] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.647845] r8169 0000:04:00.0: setting latency timer to 64 [ 2.647910] r8169 0000:04:00.0: irq 44 for MSI/MSI-X [ 2.648277] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000065c000, 00:1a:4d:57:6c:d9, XID 18000000 IRQ 44 [ 2.652984] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 2.653013] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 2.661496] Floppy drive(s): fd0 is 1.44M [ 2.677258] scsi4 : pata_jmicron [ 2.679396] scsi5 : pata_jmicron [ 2.679837] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 2.679840] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 2.680401] usb 1-3.2: new high speed USB device using ehci_hcd and address 4 [ 2.683831] ahci 0000:03:00.0: version 3.0 [ 2.683844] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.687779] FDC 0 is a post-1991 82077 [ 2.697900] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 [ 2.697998] generic-usb 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0 [ 2.698017] usbcore: registered new interface driver usbhid [ 2.698018] usbhid: USB HID core driver [ 2.700297] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.700300] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.700306] ahci 0000:03:00.0: setting latency timer to 64 [ 2.700703] scsi6 : ahci [ 2.700807] scsi7 : ahci [ 2.700885] ata7: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000100 irq 19 [ 2.700889] ata8: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000180 irq 19 [ 2.913540] ata5.00: HPA detected: current 156299375, native 156301488 [ 2.913545] ata5.00: ATA-7: MAXTOR STM3802110A, 3.AAK, max UDMA/100 [ 2.913548] ata5.00: 156299375 sectors, multi 16: LBA48 [ 2.913554] ata5.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.1B, max UDMA/33 [ 3.005204] ata5.00: configured for UDMA/100 [ 3.040580] ata5.01: configured for UDMA/33 [ 3.040872] scsi 4:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 [ 3.041042] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 3.041584] sd 4:0:0:0: [sdc] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.042020] scsi 4:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.1B PQ: 0 ANSI: 5 [ 3.042047] sd 4:0:0:0: [sdc] Write Protect is off [ 3.042051] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.042076] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.043163] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 3.043262] sr 4:0:1:0: Attached scsi CD-ROM sr1 [ 3.043321] sr 4:0:1:0: Attached scsi generic sg4 type 5 [ 3.050093] ata8: SATA link down (SStatus 0 SControl 300) [ 3.050124] ata7: SATA link down (SStatus 0 SControl 300) [ 3.061580] sdc: [ 3.062008] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.080270] usb 1-3.4: new full speed USB device using ehci_hcd and address 5 [ 3.270283] usb 2-1.1: new high speed USB device using ehci_hcd and address 4 [ 3.381586] hub 2-1.1:1.0: USB hub found [ 3.381900] hub 2-1.1:1.0: 4 ports detected [ 3.460285] usb 2-1.2: new full speed USB device using ehci_hcd and address 5 [ 3.486958] EXT4-fs (sda3): orphan cleanup on readonly fs [ 3.498611] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 3670040 [ 3.498638] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 3670038 [ 3.498647] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 3670036 [ 3.498655] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 3670035 [ 3.498663] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 3670033 [ 3.498670] EXT4-fs (sda3): 5 orphan inodes deleted [ 3.498673] EXT4-fs (sda3): recovery complete [ 3.524525] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 3.878118] input: ELAN TURBO PAD as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/input/input4 [ 3.878196] generic-usb 0003:1A34:0203.0002: input,hidraw1: USB HID v1.10 Gamepad [ELAN TURBO PAD] on usb-0000:00:1d.7-1.2/input0 [ 3.970287] usb 2-1.1.3: new full speed USB device using ehci_hcd and address 6 [ 4.090183] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/input/input5 [ 4.090276] generic-usb 0003:046D:C529.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-1.1.3/input0 [ 4.093360] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.1/input/input6 [ 4.093535] generic-usb 0003:046D:C529.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-1.1.3/input1 [ 15.048203] <30>udev[371]: starting version 167 [ 15.091077] lp: driver loaded but no devices found [ 15.113320] Adding 2096476k swap on /dev/sda2. Priority:-1 extents:1 across:2096476k [ 15.172837] parport_pc 00:09: reported by Plug and Play ACPI [ 15.172879] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 15.230180] type=1400 audit(1309002331.935:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=509 comm="apparmor_parser" [ 15.230899] type=1400 audit(1309002331.935:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser" [ 15.231360] type=1400 audit(1309002331.935:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser" [ 15.237648] IR NEC protocol handler initialized [ 15.246653] IR RC5(x) protocol handler initialized [ 15.253587] lp0: using parport0 (interrupt-driven). [ 15.257645] IR RC6 protocol handler initialized [ 15.266265] IR JVC protocol handler initialized [ 15.280568] IR Sony protocol handler initialized [ 15.295819] lirc_dev: IR Remote Control driver registered, major 250 [ 15.296806] IR LIRC bridge handler initialized [ 15.414271] ppdev: user-space parallel port driver [ 15.419758] nvidia: module license 'NVIDIA' taints kernel. [ 15.419761] Disabling lock debugging due to kernel taint [ 15.435462] Linux video capture interface: v2.00 [ 15.515800] usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1511 [ 15.516030] usbcore: registered new interface driver usblp [ 15.519547] Bluetooth: Core ver 2.15 [ 15.519581] NET: Registered protocol family 31 [ 15.519583] Bluetooth: HCI device and connection manager initialized [ 15.519585] Bluetooth: HCI socket layer initialized [ 15.536071] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 15.543320] usbcore: registered new interface driver btusb [ 15.584378] Bt87x 0000:05:00.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 15.584483] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 15.615374] bttv: driver version 0.9.18 loaded [ 15.615377] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 15.615917] bttv: Bt8xx card found (0). [ 15.615928] bttv 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 15.615937] bttv0: Bt878 (rev 2) at 0000:05:00.0, irq: 20, latency: 32, mmio: 0xea100000 [ 15.616245] bttv0: detected: (Askey Magic/others) TView99 CPH06x [card=38], PCI subsystem ID is 144f:3000 [ 15.616248] bttv0: using: Askey CPH06X TView99 [card=38,autodetected] [ 15.616272] bttv0: gpio: en=00000000, out=00000000 in=00ffefff [init] [ 15.616340] bttv0: tuner type=1 [ 15.625752] i2c-core: driver [msp3400] using legacy suspend method [ 15.625755] i2c-core: driver [msp3400] using legacy resume method [ 15.629133] uvcvideo: Found UVC 1.00 device (046d:081b) [ 15.647486] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input7 [ 15.647949] usbcore: registered new interface driver uvcvideo [ 15.647951] USB Video Class driver (v1.0.0) [ 15.650677] bttv0: audio absent, no audio device found! [ 15.658041] i2c-core: driver [tuner] using legacy suspend method [ 15.658044] i2c-core: driver [tuner] using legacy resume method [ 15.684163] All bytes are equal. It is not a TEA5767 [ 15.684222] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) [ 15.692926] tuner-simple 0-0060: creating new instance [ 15.692929] tuner-simple 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 15.693660] bttv0: registered device video1 [ 15.693728] bttv0: registered device vbi0 [ 15.693747] bttv0: PLL: 28636363 => 35468950 . [ 15.693823] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.693865] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 15.693884] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.710021] . ok [ 15.760007] Registered IR keymap rc-winfast [ 15.760173] input: bttv IR (card=38) as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/rc/rc0/input8 [ 15.760265] rc0: bttv IR (card=38) as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/rc/rc0 [ 16.157044] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.157052] nvidia 0000:01:00.0: setting latency timer to 64 [ 16.157056] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 16.157148] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 16.157251] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011 [ 16.237501] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 17.181650] 4:3:1: cannot set freq 16000 to ep 0x86 [ 17.341483] usbcore: registered new interface driver snd-usb-audio [ 17.398665] vesafb: framebuffer at 0xe5000000, mapped to 0xffffc90005200000, using 1216k, total 1216k [ 17.398668] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 17.398669] vesafb: scrolling: redraw [ 17.398671] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 17.398782] Console: switching to colour frame buffer device 80x30 [ 17.406597] fb0: VESA VGA frame buffer device [ 17.789760] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.036027] type=1400 audit(1309002334.735:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1005 comm="apparmor_parser" [ 18.041583] type=1400 audit(1309002334.745:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1005 comm="apparmor_parser" [ 18.095299] type=1400 audit(1309002334.795:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1037 comm="apparmor_parser" [ 18.096034] type=1400 audit(1309002334.795:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1037 comm="apparmor_parser" [ 18.096496] type=1400 audit(1309002334.795:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1037 comm="apparmor_parser" [ 18.099231] type=1400 audit(1309002334.795:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1039 comm="apparmor_parser" [ 18.100160] type=1400 audit(1309002334.805:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1039 comm="apparmor_parser" [ 18.264750] r8169 0000:04:00.0: eth0: link down [ 18.265097] ADDRCONF(NETDEV_UP): eth0: link is not ready