[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-22-generic-pae (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #63-Ubuntu SMP Wed Aug 18 23:57:18 UTC 2010 (Ubuntu 2.6.31-22.63-generic-pae) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 3785f000 - 37fef107 [ 0.000000] Allocated new RAMDISK: 008f5000 - 01085107 [ 0.000000] Move RAMDISK from 000000003785f000 - 0000000037fef106 to 008f5000 - 01085106 [ 0.000000] ACPI: RSDP 000f6a20 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT bfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP bfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT bfee3180 04B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS bfee0000 00040 [ 0.000000] ACPI: HPET bfee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG bfee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC bfee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT bfee87e0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4230MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008eca80] TEXT DATA BSS ==> [0000100000 - 00008eca80] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008ed000 - 00008f40f6] BRK ==> [00008ed000 - 00008f40f6] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [00008f5000 - 0001085107] NEW RAMDISK ==> [00008f5000 - 0001085107] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f5030] f5030 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048187 [ 0.000000] free_area_init_node: node 0, pgdat c07ae640, node_mem_map c1086000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8461 pages used for memmap [ 0.000000] HighMem zone: 811989 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages at c3896000, static data 39036 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037946 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-22-generic-pae root=UUID=13280632-d828-4d34-a43d-2ca5e48fa353 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 26214400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00140000) [ 0.000000] Memory: 4108368k/5242880k available (4660k kernel code, 83588k reserved, 2215k data, 560k init, 3281800k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07b8000 - 0xc0844000 ( 560 kB) [ 0.000000] .data : 0xc058d2d0 - 0xc07b7288 (2215 kB) [ 0.000000] .text : 0xc0100000 - 0xc058d2d0 (4660 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2399.750 MHz processor. [ 0.001977] Console: colour VGA+ 80x25 [ 0.001980] console [tty0] enabled [ 0.002118] hpet clockevent registered [ 0.002121] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.002127] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.50 BogoMIPS (lpj=9599000) [ 0.002143] Security Framework initialized [ 0.002162] AppArmor: AppArmor initialized [ 0.002168] Mount-cache hash table entries: 512 [ 0.002287] Initializing cgroup subsys ns [ 0.002291] Initializing cgroup subsys cpuacct [ 0.002295] Initializing cgroup subsys memory [ 0.002301] Initializing cgroup subsys devices [ 0.002303] Initializing cgroup subsys freezer [ 0.002305] Initializing cgroup subsys net_cls [ 0.002318] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.002320] CPU: L2 cache: 4096K [ 0.002322] CPU: Physical Processor ID: 0 [ 0.002324] CPU: Processor Core ID: 0 [ 0.002327] mce: CPU supports 6 MCE banks [ 0.002334] CPU0: Thermal monitoring enabled (TM2) [ 0.002337] using mwait in idle threads. [ 0.002343] Performance Counters: Core2 events, Intel PMU driver. [ 0.002348] ... version: 2 [ 0.002350] ... bit width: 40 [ 0.002351] ... generic counters: 2 [ 0.002352] ... value mask: 000000ffffffffff [ 0.002354] ... max period: 000000007fffffff [ 0.002355] ... fixed-purpose counters: 3 [ 0.002357] ... counter mask: 0000000700000003 [ 0.002360] Checking 'hlt' instruction... OK. [ 0.018320] ACPI: Core revision 20090521 [ 0.026952] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066639] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.068001] Booting processor 1 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4656.90 BogoMIPS (lpj=9313816) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.153527] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.153539] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.156122] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4799.99 BogoMIPS (lpj=9599994) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.249592] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.249602] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.252085] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4799.95 BogoMIPS (lpj=9599912) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.345520] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.345540] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.348020] Brought up 4 CPUs [ 0.348023] Total of 4 processors activated (19056.36 BogoMIPS). [ 0.348068] CPU0 attaching sched-domain: [ 0.348071] domain 0: span 0,3 level MC [ 0.348073] groups: 0 3 [ 0.348077] domain 1: span 0-3 level CPU [ 0.348079] groups: 0,3 1-2 [ 0.348083] CPU1 attaching sched-domain: [ 0.348085] domain 0: span 1-2 level MC [ 0.348087] groups: 1 2 [ 0.348090] domain 1: span 0-3 level CPU [ 0.348092] groups: 1-2 0,3 [ 0.348097] CPU2 attaching sched-domain: [ 0.348098] domain 0: span 1-2 level MC [ 0.348100] groups: 2 1 [ 0.348103] domain 1: span 0-3 level CPU [ 0.348105] groups: 1-2 0,3 [ 0.348109] CPU3 attaching sched-domain: [ 0.348111] domain 0: span 0,3 level MC [ 0.348113] groups: 3 0 [ 0.348116] domain 1: span 0-3 level CPU [ 0.348118] groups: 0,3 1-2 [ 0.348242] Booting paravirtualized kernel on bare hardware [ 0.348242] regulator: core version 0.5 [ 0.348242] Time: 10:51:12 Date: 08/26/10 [ 0.348242] NET: Registered protocol family 16 [ 0.348242] EISA bus registered [ 0.348242] ACPI: bus type pci registered [ 0.348265] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.348267] PCI: MCFG area at e0000000 reserved in E820 [ 0.348269] PCI: Using MMCONFIG for extended config space [ 0.348271] PCI: Using configuration type 1 for base access [ 0.349129] bio: create slab at 0 [ 0.352241] ACPI: EC: Look up EC in DSDT [ 0.357290] ACPI: Interpreter enabled [ 0.357311] ACPI: (supports S0 S3 S4 S5) [ 0.357330] ACPI: Using IOAPIC for interrupt routing [ 0.361474] ACPI: No dock devices found. [ 0.361554] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.361645] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.361648] pci 0000:00:01.0: PME# disabled [ 0.361714] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f] [ 0.361778] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f] [ 0.361841] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f] [ 0.361896] pci 0000:00:1a.7: reg 10 32bit mmio: [0xee105000-0xee1053ff] [ 0.361969] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee100000-0xee103fff] [ 0.362007] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.362011] pci 0000:00:1b.0: PME# disabled [ 0.362063] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.362067] pci 0000:00:1c.0: PME# disabled [ 0.362124] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.362127] pci 0000:00:1c.4: PME# disabled [ 0.362181] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.362185] pci 0000:00:1c.5: PME# disabled [ 0.362234] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] [ 0.362308] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f] [ 0.362382] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f] [ 0.362437] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee104000-0xee1043ff] [ 0.362584] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.362587] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.362590] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.362594] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.362643] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.362648] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.362653] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.362658] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.362664] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.362669] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f] [ 0.362711] pci 0000:00:1f.3: reg 10 64bit mmio: [0xee106000-0xee1060ff] [ 0.362724] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.362763] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707] [ 0.362768] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803] [ 0.362774] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907] [ 0.362779] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03] [ 0.362784] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f] [ 0.362789] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] [ 0.362842] pci 0000:01:00.0: reg 10 32bit mmio: [0xe4000000-0xe4ffffff] [ 0.362850] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.362858] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff] [ 0.362863] pci 0000:01:00.0: reg 24 io port: [0xb000-0xb07f] [ 0.362869] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.362920] pci 0000:01:00.1: reg 10 32bit mmio: [0xe6000000-0xe6003fff] [ 0.362996] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.362998] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe6ffffff] [ 0.363003] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.363039] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] [ 0.363129] pci 0000:03:00.0: reg 24 32bit mmio: [0xee000000-0xee001fff] [ 0.363166] pci 0000:03:00.0: PME# supported from D3hot [ 0.363171] pci 0000:03:00.0: PME# disabled [ 0.363222] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007] [ 0.363230] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103] [ 0.363239] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207] [ 0.363247] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303] [ 0.363256] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f] [ 0.363341] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.363345] pci 0000:00:1c.4: bridge 32bit mmio: [0xee000000-0xee0fffff] [ 0.363402] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.363423] pci 0000:04:00.0: reg 18 64bit mmio: [0xe8000000-0xe8000fff] [ 0.363445] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.363490] pci 0000:04:00.0: supports D1 D2 [ 0.363491] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.363496] pci 0000:04:00.0: PME# disabled [ 0.363546] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.363549] pci 0000:00:1c.5: bridge 32bit mmio: [0xe7000000-0xe8ffffff] [ 0.363590] pci 0000:05:01.0: reg 10 32bit mmio: [0xe9000000-0xe9ffffff] [ 0.363666] pci 0000:05:01.1: reg 10 32bit mmio: [0xea000000-0xeaffffff] [ 0.363736] pci 0000:05:01.2: reg 10 32bit mmio: [0xeb000000-0xebffffff] [ 0.363808] pci 0000:05:01.4: reg 10 32bit mmio: [0xec000000-0xecffffff] [ 0.363889] pci 0000:05:06.0: reg 10 32bit mmio: [0xed004000-0xed0047ff] [ 0.363896] pci 0000:05:06.0: reg 14 32bit mmio: [0xed000000-0xed003fff] [ 0.363937] pci 0000:05:06.0: supports D1 D2 [ 0.363939] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot [ 0.363943] pci 0000:05:06.0: PME# disabled [ 0.363979] pci 0000:00:1e.0: transparent bridge [ 0.363984] pci 0000:00:1e.0: bridge 32bit mmio: [0xe9000000-0xedffffff] [ 0.364021] pci_bus 0000:00: on NUMA node 0 [ 0.364034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.364177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.364235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.364295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.364344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.377642] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.377726] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.377808] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.377890] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.377972] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.378055] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.378136] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.378218] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.378385] SCSI subsystem initialized [ 0.378424] libata version 3.00 loaded. [ 0.378424] usbcore: registered new interface driver usbfs [ 0.378424] usbcore: registered new interface driver hub [ 0.378424] usbcore: registered new device driver usb [ 0.378424] ACPI: WMI: Mapper loaded [ 0.378424] PCI: Using ACPI for IRQ routing [ 0.388009] Bluetooth: Core ver 2.15 [ 0.388026] NET: Registered protocol family 31 [ 0.388026] Bluetooth: HCI device and connection manager initialized [ 0.388026] Bluetooth: HCI socket layer initialized [ 0.388026] NetLabel: Initializing [ 0.388026] NetLabel: domain hash size = 128 [ 0.388027] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.388042] NetLabel: unlabeled traffic allowed by default [ 0.388079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.388087] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.408051] pnp: PnP ACPI init [ 0.408061] ACPI: bus type pnp registered [ 0.410446] pnp: PnP ACPI: found 15 devices [ 0.410448] ACPI: ACPI bus type pnp unregistered [ 0.410457] PnPBIOS: Disabled by ACPI PNP [ 0.410470] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.410473] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.410475] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.410480] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.410482] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.410489] system 00:0b: ioport range 0x400-0x4bf could not be reserved [ 0.410494] system 00:0c: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.410499] system 00:0d: iomem range 0xce200-0xcffff has been reserved [ 0.410502] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.410504] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.410507] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.410509] system 00:0d: iomem range 0xbfee0000-0xbfefffff could not be reserved [ 0.410512] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.410514] system 00:0d: iomem range 0x100000-0xbfedffff could not be reserved [ 0.410517] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.410519] system 00:0d: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.410522] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.410524] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.410527] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.410529] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved [ 0.410532] system 00:0d: iomem range 0xe0000-0xeffff has been reserved [ 0.445156] AppArmor: AppArmor Filesystem Enabled [ 0.445205] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.445209] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.445213] pci 0000:00:01.0: MEM window: 0xe4000000-0xe6ffffff [ 0.445216] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff [ 0.445221] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.445225] pci 0000:00:1c.0: IO window: 0xa000-0xafff [ 0.445229] pci 0000:00:1c.0: MEM window: disabled [ 0.445233] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.445237] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.445241] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.445246] pci 0000:00:1c.4: MEM window: 0xee000000-0xee0fffff [ 0.445250] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.445254] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.445258] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.445262] pci 0000:00:1c.5: MEM window: 0xe7000000-0xe8ffffff [ 0.445267] pci 0000:00:1c.5: PREFETCH window: 0xee200000-0xee2fffff [ 0.445271] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.445274] pci 0000:00:1e.0: IO window: disabled [ 0.445278] pci 0000:00:1e.0: MEM window: 0xe9000000-0xedffffff [ 0.445282] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.445291] alloc irq_desc for 16 on node -1 [ 0.445293] alloc kstat_irqs on node -1 [ 0.445297] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.445301] pci 0000:00:01.0: setting latency timer to 64 [ 0.445307] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.445310] pci 0000:00:1c.0: setting latency timer to 64 [ 0.445316] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.445320] pci 0000:00:1c.4: setting latency timer to 64 [ 0.445326] alloc irq_desc for 17 on node -1 [ 0.445327] alloc kstat_irqs on node -1 [ 0.445330] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.445334] pci 0000:00:1c.5: setting latency timer to 64 [ 0.445339] pci 0000:00:1e.0: setting latency timer to 64 [ 0.445343] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.445345] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.445348] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.445350] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe6ffffff] [ 0.445352] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] [ 0.445354] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.445356] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.445358] pci_bus 0000:03: resource 1 mem: [0xee000000-0xee0fffff] [ 0.445361] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.445363] pci_bus 0000:04: resource 1 mem: [0xe7000000-0xe8ffffff] [ 0.445365] pci_bus 0000:04: resource 2 pref mem [0xee200000-0xee2fffff] [ 0.445367] pci_bus 0000:05: resource 1 mem: [0xe9000000-0xedffffff] [ 0.445369] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.445371] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.445398] NET: Registered protocol family 2 [ 0.445477] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.445715] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.446070] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.446245] TCP: Hash tables configured (established 131072 bind 65536) [ 0.446247] TCP reno registered [ 0.446305] NET: Registered protocol family 1 [ 0.446350] Trying to unpack rootfs image as initramfs... [ 0.501632] Switched to high resolution mode on CPU 3 [ 0.502906] Switched to high resolution mode on CPU 1 [ 0.502956] Switched to high resolution mode on CPU 2 [ 0.504059] Switched to high resolution mode on CPU 0 [ 0.608942] Freeing initrd memory: 7744k freed [ 0.612245] cpufreq-nforce2: No nForce2 chipset. [ 0.612276] Scanning for low memory corruption every 60 seconds [ 0.612367] audit: initializing netlink socket (disabled) [ 0.612383] type=2000 audit(1282819871.612:1): initialized [ 0.619953] highmem bounce pool size: 64 pages [ 0.619957] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.621229] VFS: Disk quotas dquot_6.5.2 [ 0.621282] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.621756] fuse init (API version 7.12) [ 0.621833] msgmni has been set to 1631 [ 0.622131] alg: No test for stdrng (krng) [ 0.622140] io scheduler noop registered [ 0.622142] io scheduler anticipatory registered [ 0.622144] io scheduler deadline registered [ 0.622178] io scheduler cfq registered (default) [ 0.622309] pci 0000:01:00.0: Boot video device [ 0.622430] alloc irq_desc for 24 on node -1 [ 0.622432] alloc kstat_irqs on node -1 [ 0.622441] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.622447] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.622529] alloc irq_desc for 25 on node -1 [ 0.622531] alloc kstat_irqs on node -1 [ 0.622537] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.622544] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.622641] alloc irq_desc for 26 on node -1 [ 0.622642] alloc kstat_irqs on node -1 [ 0.622648] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.622655] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.622752] alloc irq_desc for 27 on node -1 [ 0.622754] alloc kstat_irqs on node -1 [ 0.622760] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.622767] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.622850] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.622932] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.623057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.623060] ACPI: Power Button [PWRF] [ 0.623105] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.623107] ACPI: Power Button [PWRB] [ 0.623535] ACPI: SSDT bfee7f00 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.623705] processor LNXCPU:00: registered as cooling_device0 [ 0.623709] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.623878] ACPI: SSDT bfee83c0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.624108] processor LNXCPU:01: registered as cooling_device1 [ 0.624113] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.624336] ACPI: SSDT bfee8520 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.624527] processor LNXCPU:02: registered as cooling_device2 [ 0.624530] ACPI: Processor [CPU2] (supports 8 throttling states) [ 0.624712] ACPI: SSDT bfee8680 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.624926] processor LNXCPU:03: registered as cooling_device3 [ 0.624930] ACPI: Processor [CPU3] (supports 8 throttling states) [ 0.626506] isapnp: Scanning for PnP cards... [ 0.979490] isapnp: No Plug & Play device found [ 0.980409] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.980505] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.980809] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.981725] brd: module loaded [ 0.982094] loop: module loaded [ 0.982149] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.982211] ahci 0000:03:00.0: version 3.0 [ 0.982223] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.997556] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.997560] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.997567] ahci 0000:03:00.0: setting latency timer to 64 [ 0.997763] scsi0 : ahci [ 0.997846] scsi1 : ahci [ 0.997910] ata1: SATA max UDMA/133 abar m8192@0xee000000 port 0xee000100 irq 16 [ 0.997914] ata2: SATA max UDMA/133 abar m8192@0xee000000 port 0xee000180 irq 16 [ 0.997973] ata_piix 0000:00:1f.2: version 2.13 [ 0.997983] alloc irq_desc for 19 on node -1 [ 0.997984] alloc kstat_irqs on node -1 [ 0.997991] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.998000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.998038] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.998103] scsi2 : ata_piix [ 0.998173] scsi3 : ata_piix [ 0.998763] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.998768] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.998805] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.998812] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.998866] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.998941] scsi4 : ata_piix [ 0.999006] scsi5 : ata_piix [ 0.999433] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.999436] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.999794] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 0.999799] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.999827] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 0.999895] scsi6 : pata_jmicron [ 0.999963] scsi7 : pata_jmicron [ 1.000500] ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 17 [ 1.000503] ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 17 [ 1.000991] Fixed MDIO Bus: probed [ 1.001019] PPP generic driver version 2.4.2 [ 1.001089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.001103] alloc irq_desc for 18 on node -1 [ 1.001104] alloc kstat_irqs on node -1 [ 1.001109] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.001118] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.001121] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.001144] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.005055] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.005066] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xee105000 [ 1.020031] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.020115] usb usb1: configuration #1 chosen from 1 choice [ 1.020149] hub 1-0:1.0: USB hub found [ 1.020157] hub 1-0:1.0: 6 ports detected [ 1.020222] alloc irq_desc for 23 on node -1 [ 1.020224] alloc kstat_irqs on node -1 [ 1.020228] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.020235] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.020238] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.020262] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.024159] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.024169] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee104000 [ 1.036026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.036098] usb usb2: configuration #1 chosen from 1 choice [ 1.036132] hub 2-0:1.0: USB hub found [ 1.036140] hub 2-0:1.0: 6 ports detected [ 1.036213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.036227] uhci_hcd: USB Universal Host Controller Interface driver [ 1.036244] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.036248] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.036251] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.036276] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.036296] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 1.036354] usb usb3: configuration #1 chosen from 1 choice [ 1.036375] hub 3-0:1.0: USB hub found [ 1.036381] hub 3-0:1.0: 2 ports detected [ 1.036416] alloc irq_desc for 21 on node -1 [ 1.036418] alloc kstat_irqs on node -1 [ 1.036421] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.036426] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.036429] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.036451] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.036478] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 1.036536] usb usb4: configuration #1 chosen from 1 choice [ 1.036557] hub 4-0:1.0: USB hub found [ 1.036562] hub 4-0:1.0: 2 ports detected [ 1.036598] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.036604] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.036606] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.036633] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.036653] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 1.036713] usb usb5: configuration #1 chosen from 1 choice [ 1.036734] hub 5-0:1.0: USB hub found [ 1.036739] hub 5-0:1.0: 2 ports detected [ 1.036776] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.036781] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.036783] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.036807] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.036827] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 1.036891] usb usb6: configuration #1 chosen from 1 choice [ 1.036911] hub 6-0:1.0: USB hub found [ 1.036916] hub 6-0:1.0: 2 ports detected [ 1.036951] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.036956] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.036958] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.036980] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.037000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 1.037057] usb usb7: configuration #1 chosen from 1 choice [ 1.037079] hub 7-0:1.0: USB hub found [ 1.037084] hub 7-0:1.0: 2 ports detected [ 1.037117] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.037122] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.037124] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.037148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.037168] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 1.037225] usb usb8: configuration #1 chosen from 1 choice [ 1.037248] hub 8-0:1.0: USB hub found [ 1.037253] hub 8-0:1.0: 2 ports detected [ 1.037327] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.037329] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.037421] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.037489] mice: PS/2 mouse device common for all mice [ 1.037599] rtc_cmos 00:04: RTC can wake from S4 [ 1.037624] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.037646] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.037727] device-mapper: uevent: version 1.0.3 [ 1.037830] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.037970] device-mapper: multipath: version 1.1.0 loaded [ 1.037973] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.038111] EISA: Probing bus 0 at eisa.0 [ 1.038136] EISA: Detected 0 cards. [ 1.038371] cpuidle: using governor ladder [ 1.038372] cpuidle: using governor menu [ 1.038774] TCP cubic registered [ 1.038901] NET: Registered protocol family 10 [ 1.039269] lo: Disabled Privacy Extensions [ 1.039539] NET: Registered protocol family 17 [ 1.039553] Bluetooth: L2CAP ver 2.13 [ 1.039555] Bluetooth: L2CAP socket layer initialized [ 1.039557] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.039558] Bluetooth: SCO socket layer initialized [ 1.039603] Bluetooth: RFCOMM TTY layer initialized [ 1.039606] Bluetooth: RFCOMM socket layer initialized [ 1.039608] Bluetooth: RFCOMM ver 1.11 [ 1.044243] Using IPI No-Shortcut mode [ 1.044331] PM: Resume from disk failed. [ 1.044343] registered taskstats version 1 [ 1.044483] Magic number: 6:365:882 [ 1.044489] hub 8-0:1.0: hash matches [ 1.044575] rtc_cmos 00:04: setting system clock to 2010-08-26 10:51:12 UTC (1282819872) [ 1.044578] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.044579] EDD information not available. [ 1.059185] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.168664] ata7.00: ATA-7: SAMSUNG HD300LD, WK100-12, max UDMA/100 [ 1.168668] ata7.00: 586072368 sectors, multi 16: LBA48 [ 1.168714] ata7.01: ATAPI: PLEXTOR DVDR PX-716A, 1.11, max UDMA/66 [ 1.176689] ata7.00: configured for UDMA/100 [ 1.184534] ata7.01: configured for UDMA/66 [ 1.326606] ata5: SATA link down (SStatus 0 SControl 300) [ 1.328043] ata2: SATA link down (SStatus 0 SControl 300) [ 1.328073] ata1: SATA link down (SStatus 0 SControl 300) [ 1.337221] ata6: SATA link down (SStatus 0 SControl 300) [ 1.448018] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.581496] usb 1-2: configuration #1 chosen from 1 choice [ 1.581846] hub 1-2:1.0: USB hub found [ 1.582178] hub 1-2:1.0: 4 ports detected [ 1.692023] usb 2-5: new high speed USB device using ehci_hcd and address 2 [ 1.812071] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.812083] ata4.01: SATA link down (SStatus 0 SControl 300) [ 1.812248] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.812259] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.826616] usb 2-5: configuration #1 chosen from 1 choice [ 1.836322] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7 [ 1.836326] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.836371] ata3.01: ATAPI: SONY DVD-ROM DDU1615S, EYN1, max UDMA/100 [ 1.839284] ata4.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133 [ 1.839288] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.852822] ata4.00: configured for UDMA/133 [ 1.868334] ata3.00: configured for UDMA/133 [ 1.900221] ata3.01: configured for UDMA/100 [ 1.900645] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 1.900771] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.900789] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.901121] sd 2:0:0:0: [sda] Write Protect is off [ 1.901124] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.901152] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.901278] sda: sda1 sda2 [ 1.904343] scsi 2:0:1:0: CD-ROM SONY DVD-ROM DDU1615S EYN1 PQ: 0 ANSI: 5 [ 1.904417] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.906729] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 1.906733] Uniform CD-ROM driver Revision: 3.20 [ 1.906824] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 1.906889] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 1.906984] scsi 3:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5 [ 1.907076] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.907083] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.907113] sd 3:0:0:0: [sdb] Write Protect is off [ 1.907115] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.907135] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.907160] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD300LD WK10 PQ: 0 ANSI: 5 [ 1.907233] sdb: [ 1.907243] sd 6:0:0:0: [sdc] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 1.907249] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 1.907611] sd 6:0:0:0: [sdc] Write Protect is off [ 1.907614] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.907988] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.908009] scsi 6:0:1:0: CD-ROM PLEXTOR DVDR PX-716A 1.11 PQ: 0 ANSI: 5 [ 1.910136] sdb2 [ 1.948292] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.075453] Freeing unused kernel memory: 560k freed [ 2.075690] Write protecting the kernel text: 4664k [ 2.075778] Write protecting the kernel read-only data: 1860k [ 2.171856] Linux agpgart interface v0.103 [ 2.177573] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.178346] Floppy drive(s): fd0 is 1.44M [ 2.206472] FDC 0 is a post-1991 82077 [ 2.210632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.210652] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.210702] r8169 0000:04:00.0: setting latency timer to 64 [ 2.210762] alloc irq_desc for 28 on node -1 [ 2.210764] alloc kstat_irqs on node -1 [ 2.210780] r8169 0000:04:00.0: irq 28 for MSI/MSI-X [ 2.211310] eth0: RTL8168b/8111b at 0xf8312000, 00:1a:4d:45:d2:62, XID 38000000 IRQ 28 [ 2.220917] ohci1394 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.226094] Initializing USB Mass Storage driver... [ 2.226194] scsi8 : SCSI emulation for USB Mass Storage devices [ 2.226291] usbcore: registered new interface driver usb-storage [ 2.226293] USB Mass Storage support registered. [ 2.226418] usb-storage: device found at 2 [ 2.226420] usb-storage: waiting for device to settle before scanning [ 2.277565] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[ed004000-ed0047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.353554] usb 3-1: configuration #1 chosen from 1 choice [ 2.597547] usb 8-2: new full speed USB device using uhci_hcd and address 2 [ 2.755447] usb 8-2: configuration #1 chosen from 1 choice [ 2.832314] usb 1-2.2: new high speed USB device using ehci_hcd and address 4 [ 2.925991] usb 1-2.2: configuration #1 chosen from 1 choice [ 2.926311] scsi9 : SCSI emulation for USB Mass Storage devices [ 2.926402] usb-storage: device found at 4 [ 2.926404] usb-storage: waiting for device to settle before scanning [ 2.997839] usb 1-2.3: new low speed USB device using ehci_hcd and address 5 [ 3.093661] usb 1-2.3: configuration #1 chosen from 1 choice [ 3.098882] usbcore: registered new interface driver hiddev [ 3.101911] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.3/1-2.3:1.0/input/input4 [ 3.101971] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-2.3/input0 [ 3.101981] usbcore: registered new interface driver usbhid [ 3.101983] usbhid: v2.6:USB HID core driver [ 3.183523] xor: automatically using best checksumming function: pIII_sse [ 3.200504] pIII_sse : 8932.000 MB/sec [ 3.200505] xor: using function: pIII_sse (8932.000 MB/sec) [ 3.202465] device-mapper: dm-raid45: initialized v0.2594b [ 3.547557] PM: Starting manual resume from disk [ 3.547560] PM: Resume from partition 8:21 [ 3.547562] PM: Checking hibernation image. [ 3.547704] PM: Resume from disk failed. [ 3.561214] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c3997200001a4d] [ 3.568759] EXT4-fs (sdb6): barriers enabled [ 3.574660] kjournald2 starting: pid 449, dev sdb6:8, commit interval 5 seconds [ 3.574768] EXT4-fs (sdb6): delayed allocation enabled [ 3.574773] EXT4-fs: file extents enabled [ 3.575275] EXT4-fs: mballoc enabled [ 3.575285] EXT4-fs (sdb6): mounted filesystem with ordered data mode [ 4.017777] type=1505 audit(1282819875.472:2): operation="profile_load" pid=476 name=/usr/share/gdm/guest-session/Xsession [ 4.020481] type=1505 audit(1282819875.472:3): operation="profile_load" pid=477 name=/sbin/dhclient3 [ 4.021126] type=1505 audit(1282819875.476:4): operation="profile_load" pid=477 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.021455] type=1505 audit(1282819875.476:5): operation="profile_load" pid=477 name=/usr/lib/connman/scripts/dhclient-script [ 4.063407] type=1505 audit(1282819875.516:6): operation="profile_load" pid=478 name=/usr/bin/evince [ 4.073180] type=1505 audit(1282819875.528:7): operation="profile_load" pid=478 name=/usr/bin/evince-previewer [ 4.078945] type=1505 audit(1282819875.532:8): operation="profile_load" pid=478 name=/usr/bin/evince-thumbnailer [ 4.115457] type=1505 audit(1282819875.567:9): operation="profile_load" pid=480 name=/usr/lib/cups/backend/cups-pdf [ 4.116177] type=1505 audit(1282819875.571:10): operation="profile_load" pid=480 name=/usr/sbin/cupsd [ 7.224586] usb-storage: device scan complete [ 7.227552] scsi 8:0:0:0: Direct-Access SAMSUNG SP2514N 0000 PQ: 0 ANSI: 0 [ 7.228068] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 7.228636] sd 8:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7.229509] sd 8:0:0:0: [sdd] Write Protect is off [ 7.229512] sd 8:0:0:0: [sdd] Mode Sense: 27 00 00 00 [ 7.229515] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 7.231008] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 7.231012] sdd: sdd1 [ 7.241259] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 7.241263] sd 8:0:0:0: [sdd] Attached SCSI disk [ 7.924309] usb-storage: device scan complete [ 7.924759] scsi 9:0:0:0: Direct-Access HP Photosmart D5100 1.00 PQ: 0 ANSI: 2 [ 7.925078] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 7.926472] sd 9:0:0:0: [sde] Attached SCSI removable disk [ 16.131337] udev: starting version 147 [ 16.140258] lp: driver loaded but no devices found [ 16.144282] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded [ 16.147155] CAPI Subsystem Rev 1.1.2.8 [ 16.148701] capidrv: Rev 1.1.2.2: loaded [ 16.154635] capifs: Rev 1.1.2.3 [ 16.157268] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) [ 16.182376] Adding 5285344k swap on /dev/sdb5. Priority:-1 extents:1 across:5285344k [ 16.275962] nvidia: module license 'NVIDIA' taints kernel. [ 16.275966] Disabling lock debugging due to kernel taint [ 16.294324] Linux video capture interface: v2.00 [ 16.321690] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded [ 16.322024] cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected], frontend(s): 1 [ 16.322026] cx88[0]: TV tuner type 4, Radio tuner type -1 [ 16.333616] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded [ 16.340633] cx2388x alsa driver version 0.0.7 loaded [ 16.343046] parport_pc 00:09: reported by Plug and Play ACPI [ 16.343091] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.349860] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.355649] ppdev: user-space parallel port driver [ 16.383726] alloc irq_desc for 22 on node -1 [ 16.383729] alloc kstat_irqs on node -1 [ 16.383736] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.383768] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.388997] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3268 [ 16.389245] usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC402 [ 16.389264] usbcore: registered new interface driver usblp [ 16.440581] lp0: using parport0 (interrupt-driven). [ 16.452816] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 16.486095] tveeprom 0-0050: Hauppauge model 92001, rev B1B1, serial# 206551 [ 16.486098] tveeprom 0-0050: MAC address is 00-0D-FE-03-26-D7 [ 16.486100] tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4) [ 16.486103] tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80) [ 16.486105] tveeprom 0-0050: audio processor is CX883 (idx 32) [ 16.486108] tveeprom 0-0050: decoder processor is CX883 (idx 22) [ 16.486110] tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter [ 16.486112] cx88[0]: hauppauge eeprom: model=92001 [ 16.486556] input: cx88 IR (Hauppauge Nova-S-Plus as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/input/input6 [ 16.486600] cx88[0]/2: cx2388x 8802 Driver Manager [ 16.486613] cx88-mpeg driver manager 0000:05:01.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 16.486621] cx88[0]/2: found at 0000:05:01.2, rev: 5, irq: 19, latency: 32, mmio: 0xeb000000 [ 16.486626] IRQ 19/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 16.486657] cx8800 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 16.486666] cx88[0]/0: found at 0000:05:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xe9000000 [ 16.486674] IRQ 19/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 16.486705] cx88[0]/0: registered device video0 [v4l2] [ 16.486726] cx88[0]/0: registered device vbi0 [ 16.486874] cx88_audio 0000:05:01.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 16.486882] IRQ 19/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 16.486899] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 16.497686] cx88/2: cx2388x dvb driver version 0.0.7 loaded [ 16.497689] cx88/2: registering cx8802 driver, type: dvb access: shared [ 16.497693] cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37] [ 16.497695] cx88[0]/2: cx2388x based DVB/ATSC card [ 16.497696] cx8802_alloc_frontends() allocating 1 frontend(s) [ 16.505176] CX24123: detected CX24123 [ 16.512660] DVB: registering new adapter (cx88[0]) [ 16.512664] DVB: registering adapter 0 frontend 0 (Conexant CX24123/CX24109)... [ 16.522191] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.522199] nvidia 0000:01:00.0: setting latency timer to 64 [ 16.522352] NVRM: loading NVIDIA UNIX x86 Kernel Module 256.44 Thu Jul 29 01:30:36 PDT 2010 [ 16.553858] EXT4-fs (sdb6): internal journal on sdb6:8 [ 16.715815] kjournald starting. Commit interval 5 seconds [ 16.716579] EXT3 FS on sdc1, internal journal [ 16.716585] EXT3-fs: mounted filesystem with ordered data mode. [ 16.868732] kjournald starting. Commit interval 5 seconds [ 16.869037] EXT3 FS on sda2, internal journal [ 16.869045] EXT3-fs: mounted filesystem with ordered data mode. [ 17.864704] kjournald starting. Commit interval 5 seconds [ 17.865015] EXT3 FS on sdb7, internal journal [ 17.865026] EXT3-fs: mounted filesystem with ordered data mode. [ 17.948167] __ratelimit: 3 callbacks suppressed [ 17.948170] type=1505 audit(1282812689.399:12): operation="profile_replace" pid=1209 name=/usr/share/gdm/guest-session/Xsession [ 17.949609] type=1505 audit(1282812689.403:13): operation="profile_replace" pid=1210 name=/sbin/dhclient3 [ 17.950221] type=1505 audit(1282812689.403:14): operation="profile_replace" pid=1210 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 17.950553] type=1505 audit(1282812689.403:15): operation="profile_replace" pid=1210 name=/usr/lib/connman/scripts/dhclient-script [ 17.953880] type=1505 audit(1282812689.407:16): operation="profile_replace" pid=1211 name=/usr/bin/evince [ 17.963698] type=1505 audit(1282812689.415:17): operation="profile_replace" pid=1211 name=/usr/bin/evince-previewer [ 17.969593] type=1505 audit(1282812689.423:18): operation="profile_replace" pid=1211 name=/usr/bin/evince-thumbnailer [ 17.977679] type=1505 audit(1282812689.431:19): operation="profile_replace" pid=1225 name=/usr/lib/cups/backend/cups-pdf [ 17.978395] type=1505 audit(1282812689.431:20): operation="profile_replace" pid=1225 name=/usr/sbin/cupsd [ 17.980443] type=1505 audit(1282812689.431:21): operation="profile_replace" pid=1229 name=/usr/sbin/tcpdump [ 18.055848] kjournald starting. Commit interval 5 seconds [ 18.056128] EXT3 FS on sdb8, internal journal [ 18.056133] EXT3-fs: mounted filesystem with ordered data mode. [ 18.196967] r8169: eth0: link up [ 18.196982] r8169: eth0: link up