Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31-605-imx51 (buildd@imbe) (gcc version 4.4.3 (Ubuntu 4.4.3-3ubuntu1) ) #9-Ubuntu Tue Mar 9 16:30:45 UTC 2010 (Ubuntu 2.6.31-605.9-imx51) CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: Freescale MX51 Babbage Board Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 122880 free_area_init_node: node 0, pgdat c0615124, node_mem_map c0697000 DMA zone: 128 pages used for memmap DMA zone: 0 pages reserved DMA zone: 16256 pages, LIFO batch:3 Normal zone: 832 pages used for memmap Normal zone: 105664 pages, LIFO batch:31 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920 Kernel command line: console=ttymxc0,115200 console=tty0 file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) allocated 2457600 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 480MB = 480MB total Memory: 468480KB available (5768K code, 744K data, 184K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:272 MXC IRQ initialized Console: colour dummy device 80x30 console [tty0] enabled Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696) Security Framework initialized AppArmor: AppArmor initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Testing write buffer coherency: ok tmpfs: No value for mount option 'mode' devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 CPU is i.MX51 Revision 3.0 MXC GPIO hardware iomux_config_mux: Warning: iomux pin config changed, reg=fb0a8134, prev=0x1 new=0x3 IRAM READY mxc_init_dvfs_per initialised Using SDMA I.API MXC DMA API initialized bio: create slab at 0 SCSI subsystem initialized libata version 3.00 loaded. CSPI: mxc_spi-0 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver MXC I2C driver MXC HS I2C driver IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) PMIC Light driver loading... Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized NET: Registered protocol family 8 NET: Registered protocol family 20 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default mc13892 Rev 2.0 FinVer 2 detected Initializing regulators for Babbage. regulator: SW1: 600 <--> 1375 mV regulator: SW2: 900 <--> 1850 mV regulator: SW3: 1100 <--> 1850 mV regulator: SW4: 1100 <--> 1850 mV regulator: SWBST: 0 mV regulator: VIOHI: 0 mV regulator: VPLL: 1050 <--> 1800 mV regulator: VDIG: 1650 mV regulator: VSD: 1800 <--> 3150 mV regulator: VUSB2: 2400 <--> 2775 mV regulator: VVIDEO: 2775 mV regulator: VAUDIO: 2300 <--> 3000 mV regulator: VCAM: 2500 <--> 3000 mV fast normal regulator: VGEN1: 1200 mV regulator: VGEN2: 1200 <--> 3150 mV regulator: VGEN3: 1800 <--> 2900 mV regulator: VUSB: 0 mV regulator: GPO1: 0 mV regulator: GPO2: 0 mV regulator: GPO3: 0 mV regulator: GPO4: 0 mV PMIC ADC start probe PMIC Light successfully loaded Device spi1.0 probed AppArmor: AppArmor Filesystem Enabled NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 LPMode driver module loaded Static Power Management for Freescale i.MX51 PM driver module loaded sdram autogating driver module loaded Bus freq driver module loaded DVI monitor is primary usb: Host 1 host (isp1504) registered usb: DR host (utmi) registered usb: DR gadget (utmi) registered mxc_dvfs_core_probe DVFS driver module loaded i.MXC CPU frequency driver Switched to high resolution mode on CPU 0 DVFS PER driver module loaded audit: initializing netlink socket (disabled) type=2000 audit(0.720:1): initialized Trying to unpack rootfs image as initramfs... VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.12) msgmni has been set to 915 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) fbcvt: 1024x768@60: CVT Name - .786M3 mxc_ipu mxc_ipu: Channel already disabled 9 mxc_ipu mxc_ipu: Channel already uninitialized 9 IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) Console: switching to colour frame buffer device 128x48 fbcvt: 1024x768@60: CVT Name - .786M3 regulator: get() with no identifier regulator: get() with no identifier regulator: get() with no identifier Freeing initrd memory: 9472K mxci2c_wait_writefifo:wait error Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX console [ttymxc0] enabled mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale i.MX mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale i.MX brd: module loaded loop: module loaded Fixed MDIO Bus: probed FEC Ethernet Driver fec: PHY @ 0x0, ID 0x0007c0c4 -- LAN8700 PPP generic driver version 2.4.2 MXC MTD nor Driver 2.0 MXC MTD nand Driver 3.0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 14, io base 0x73f80200 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 fsl-ehci fsl-ehci.1: irq 18, io base 0x73f80000 fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ARC USBOTG Device Controller driver (1 August 2005) udc: request mem region for fsl-usb2-udc failed fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16 mice: PS/2 mouse device common for all mice MXC keypad loaded clk: Unable to get requested clock: kpp_clk input: mxckpd as /devices/virtual/input/input0 mc13892 rtc probe start pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0 mc13892 rtc probe succeed i2c /dev entries driver APM Battery Driver MXC WatchDog Driver 2.0 clk: Unable to get requested clock: wdog_clk MXC Watchdog # 0 Timer: initial timeout 60 sec device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.1.0 loaded device-mapper: multipath round-robin: version 1.0.0 loaded cpuidle: using governor ladder cpuidle: using governor menu usb 1-1: new high speed USB device using fsl-ehci and address 2 pmic_battery: probe of pmic_battery.1 failed with error -1 SCC2: Driver Status is OK Sahara HW Version is 0x27000410 ioctl pointer: c034c4a4. mmap pointer: c034ccac In fsh_shw_smalloc (km): partition_base:de85c000 partition_base_phys: 1fffc000 writing UMID and MAP to secure the partition VPU initialized mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 128 irq 1 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. mmc1: SDHCI detect irq 134 irq 2 INTERNAL DMA Registered led device: pmic_ledsr Registered led device: pmic_ledsg Registered led device: pmic_ledsb Advanced Linux Sound Architecture Driver Version 1.0.20. usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 7 ports detected sgtl5000-i2c 1-000a: SGTL5000 revision 17 No device for DAI imx-ssi-1-0 No device for DAI imx-ssi-1-1 No device for DAI imx-ssi-2-0 No device for DAI imx-ssi-2-1 DMA Sound Buffers Allocated:UseIram=1 buf->addr=1ffe5000 buf->area=de8a0000 size=24576 DMA Sound Buffers Allocated:UseIram=1 buf->addr=ac1d0000 buf->area=fc16d000 size=24576 asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok mmc0: new SDHC card at address 88f7 mmcblk0: mmc0:88f7 SD04G 3.69 GiB mmcblk0: p1 p2 ALSA device list: #0: imx-3stack (SGTL5000) TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 ThumbEE CPU extension supported. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 registered taskstats version 1 regulator_init_complete: incomplete constraints, leaving GPO4 on regulator_init_complete: incomplete constraints, leaving GPO3 on regulator_init_complete: incomplete constraints, leaving GPO2 on regulator_init_complete: incomplete constraints, leaving GPO1 on regulator_init_complete: incomplete constraints, leaving VUSB on regulator_init_complete: incomplete constraints, leaving VGEN3 on regulator_init_complete: incomplete constraints, leaving VGEN2 on regulator_init_complete: incomplete constraints, leaving VGEN1 on regulator_init_complete: incomplete constraints, leaving VCAM on regulator_init_complete: incomplete constraints, leaving VAUDIO on regulator_init_complete: incomplete constraints, leaving VUSB2 on regulator_init_complete: incomplete constraints, leaving VSD on regulator_init_complete: incomplete constraints, leaving VPLL on regulator_init_complete: incomplete constraints, leaving VIOHI on regulator_init_complete: incomplete constraints, leaving SWBST on input: mxc_ts as /devices/virtual/input/input1 mxc input touchscreen loaded pmic_rtc pmic_rtc.1: setting system clock to 2010-03-17 19:46:55 UTC (1268855215) Freeing init memory: 184K ramzswap: disk size set to 119580 kB usb 1-1.2: new full speed USB device using fsl-ehci and address 3 udev: starting version 151 usb 1-1.2: configuration #1 chosen from 1 choice hub 1-1.2:1.0: USB hub found hub 1-1.2:1.0: 4 ports detected Adding 119576k swap on /dev/ramzswap0. Priority:100 extents:1 across:119576k SSD usb 1-1.2.2: new low speed USB device using fsl-ehci and address 4 usb 1-1.2.2: configuration #1 chosen from 1 choice usb 1-1.2.3: new low speed USB device using fsl-ehci and address 5 usbcore: registered new interface driver hiddev input: NOVATEK Kensington U+P Keyboard as /devices/platform/fsl-ehci.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input2 generic-usb 0003:047D:2043.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK Kensington U+P Keyboard] on usb-fsl-ehci.0-1.2.2/input0 input: NOVATEK Kensington U+P Keyboard as /devices/platform/fsl-ehci.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/input/input3 generic-usb 0003:047D:2043.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK Kensington U+P Keyboard] on usb-fsl-ehci.0-1.2.2/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 1-1.2.3: configuration #1 chosen from 1 choice input: HID 04b3:310b as /devices/platform/fsl-ehci.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input4 generic-usb 0003:04B3:310B.0003: input,hidraw2: USB HID v1.00 Mouse [HID 04b3:310b] on usb-fsl-ehci.0-1.2.3/input0 xor: measuring software checksum speed arm4regs : 1028.000 MB/sec 8regs : 952.800 MB/sec 32regs : 1028.800 MB/sec xor: using function: 32regs (1028.800 MB/sec) device-mapper: dm-raid45: initialized v0.2594b aufs 2-standalone.tree-30-20090727 squashfs: version 4.0 (2009/01/31) Phillip Lougher usb 1-1.6: new high speed USB device using fsl-ehci and address 6 usb 1-1.6: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 0:0:0:0: Direct-Access ST925041 0AS 0041 PQ: 0 ANSI: 0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sda2 < sda5 > sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI disk Adding 13887480k swap on /dev/sda5. Priority:-1 extents:1 across:13887480k udev: starting version 151 eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.