[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-15-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-3ubuntu1) ) #22-Ubuntu SMP Tue Mar 2 02:24:17 UTC 2010 (Ubuntu 2.6.32-15.22-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] modified: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] modified: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 372a6000 - 37fef7c1 [ 0.000000] Allocated new RAMDISK: 00914000 - 0165d7c1 [ 0.000000] Move RAMDISK from 00000000372a6000 - 0000000037fef7c0 to 00914000 - 0165d7c0 [ 0.000000] ACPI: RSDP 000f69c0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT bfff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP bfff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT bfff30c0 04B39 (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS bfff0000 00040 [ 0.000000] ACPI: SSDT bfff7c80 0020C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG bfff7ec0 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC bfff7c00 0007C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000090ff98] TEXT DATA BSS ==> [0000100000 - 000090ff98] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0000910000 - 000091308e] BRK ==> [0000910000 - 000091308e] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000914000 - 000165d7c1] NEW RAMDISK ==> [0000914000 - 000165d7c1] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4f30] f4f30 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfff0 [ 0.000000] On node 0 totalpages: 786315 [ 0.000000] free_area_init_node: node 0, pgdat c07cd2e0, node_mem_map c165f000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4368 pages used for memmap [ 0.000000] HighMem zone: 554722 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s35928 r0 d21416 u2097152 [ 0.000000] pcpu-alloc: s35928 r0 d21416 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780171 [ 0.000000] Kernel command line: root=UUID=73d091ef-8ee9-4ad2-9243-1ece878c1024 resume=/dev/fastrcvg/swaplv ro acpi_use_timer_override usbcore.autosuspend=1 splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15728320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfff0) [ 0.000000] Memory: 3081492k/3145664k available (4777k kernel code, 62820k reserved, 2228k data, 660k init, 2236360k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07d8000 - 0xc087d000 ( 660 kB) [ 0.000000] .data : 0xc05aa6f3 - 0xc07d79a8 (2228 kB) [ 0.000000] .text : 0xc0100000 - 0xc05aa6f3 (4777 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2470.523 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4941.04 BogoMIPS (lpj=9882092) [ 0.004115] Security Framework initialized [ 0.004179] AppArmor: AppArmor initialized [ 0.004231] Mount-cache hash table entries: 512 [ 0.004397] Initializing cgroup subsys ns [ 0.004445] Initializing cgroup subsys cpuacct [ 0.004494] Initializing cgroup subsys memory [ 0.004546] Initializing cgroup subsys devices [ 0.004594] Initializing cgroup subsys freezer [ 0.004641] Initializing cgroup subsys net_cls [ 0.004703] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004754] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004801] CPU: Physical Processor ID: 0 [ 0.004848] CPU: Processor Core ID: 0 [ 0.004896] mce: CPU supports 5 MCE banks [ 0.004958] Performance Events: AMD PMU driver. [ 0.005041] ... version: 0 [ 0.005087] ... bit width: 48 [ 0.005134] ... generic registers: 4 [ 0.005181] ... value mask: 0000ffffffffffff [ 0.005229] ... max period: 00007fffffffffff [ 0.005277] ... fixed-purpose events: 0 [ 0.005324] ... event mask: 000000000000000f [ 0.005373] Checking 'hlt' instruction... OK. [ 0.021913] ACPI: Core revision 20090903 [ 0.029319] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.029373] ftrace: allocating 22242 entries in 44 pages [ 0.032388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.036001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.036001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.036001] ..... (found apic 0 pin 2) ... [ 0.040001] ....... failed. [ 0.040001] ...trying to set up timer as Virtual Wire IRQ... [ 0.040001] ..... failed. [ 0.040001] ...trying to set up timer as ExtINT IRQ... [ 0.081387] ..... works. [ 0.081432] CPU0: Dual Core AMD Opteron(tm) Processor 180 stepping 02 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.168118] CPU1: Dual Core AMD Opteron(tm) Processor 180 stepping 02 [ 0.168479] Brought up 2 CPUs [ 0.168525] Total of 2 processors activated (9881.94 BogoMIPS). [ 0.168749] CPU0 attaching sched-domain: [ 0.168751] domain 0: span 0-1 level MC [ 0.168754] groups: 0 1 [ 0.168759] CPU1 attaching sched-domain: [ 0.168761] domain 0: span 0-1 level MC [ 0.168763] groups: 1 0 [ 0.168908] devtmpfs: initialized [ 0.169257] regulator: core version 0.5 [ 0.169324] Time: 9:51:46 Date: 03/06/10 [ 0.170782] NET: Registered protocol family 16 [ 0.170936] EISA bus registered [ 0.170989] ACPI: bus type pci registered [ 0.171090] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255 [ 0.171142] PCI: MCFG area at d0000000 reserved in E820 [ 0.171190] PCI: Using MMCONFIG for extended config space [ 0.171238] PCI: Using configuration type 1 for base access [ 0.172156] Trying to unpack rootfs image as initramfs... [ 0.180176] bio: create slab at 0 [ 0.180958] ACPI: EC: Look up EC in DSDT [ 0.187068] ACPI: Interpreter enabled [ 0.187118] ACPI: (supports S0 S1 S4 S5) [ 0.187309] ACPI: Using IOAPIC for interrupt routing [ 0.193477] ACPI: No dock devices found. [ 0.193600] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.193736] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.193799] pci 0000:00:01.1: reg 10 io port: [0xe400-0xe41f] [ 0.193807] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.193810] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.193820] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.193869] pci 0000:00:01.1: PME# disabled [ 0.193933] pci 0000:00:02.0: reg 10 32bit mmio: [0xf4100000-0xf4100fff] [ 0.193948] pci 0000:00:02.0: supports D1 D2 [ 0.193950] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194001] pci 0000:00:02.0: PME# disabled [ 0.194062] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.194081] pci 0000:00:02.1: supports D1 D2 [ 0.194083] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194134] pci 0000:00:02.1: PME# disabled [ 0.194198] pci 0000:00:04.0: reg 10 io port: [0xb400-0xb4ff] [ 0.194202] pci 0000:00:04.0: reg 14 io port: [0xb800-0xb8ff] [ 0.194205] pci 0000:00:04.0: reg 18 32bit mmio: [0xf4103000-0xf4103fff] [ 0.194218] pci 0000:00:04.0: supports D1 D2 [ 0.194236] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.194258] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7] [ 0.194261] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3] [ 0.194264] pci 0000:00:07.0: reg 18 io port: [0x970-0x977] [ 0.194268] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73] [ 0.194271] pci 0000:00:07.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.194275] pci 0000:00:07.0: reg 24 32bit mmio: [0xf4104000-0xf4104fff] [ 0.194294] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7] [ 0.194298] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3] [ 0.194301] pci 0000:00:08.0: reg 18 io port: [0x960-0x967] [ 0.194305] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63] [ 0.194308] pci 0000:00:08.0: reg 20 io port: [0xe000-0xe00f] [ 0.194311] pci 0000:00:08.0: reg 24 32bit mmio: [0xf4105000-0xf4105fff] [ 0.194341] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf4102000-0xf4102fff] [ 0.194345] pci 0000:00:0a.0: reg 14 io port: [0xe800-0xe807] [ 0.194359] pci 0000:00:0a.0: supports D1 D2 [ 0.194361] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194411] pci 0000:00:0a.0: PME# disabled [ 0.194484] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194535] pci 0000:00:0b.0: PME# disabled [ 0.194609] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194659] pci 0000:00:0c.0: PME# disabled [ 0.194735] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194785] pci 0000:00:0d.0: PME# disabled [ 0.194858] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194909] pci 0000:00:0e.0: PME# disabled [ 0.195049] pci 0000:01:07.0: reg 10 32bit mmio pref: [0xf4000000-0xf4000fff] [ 0.195098] pci 0000:01:07.1: reg 10 32bit mmio pref: [0xf4001000-0xf4001fff] [ 0.195148] pci 0000:01:08.0: reg 10 io port: [0x8000-0x801f] [ 0.195174] pci 0000:01:08.0: supports D1 D2 [ 0.195192] pci 0000:01:08.1: reg 10 io port: [0x8400-0x8407] [ 0.195218] pci 0000:01:08.1: supports D1 D2 [ 0.195241] pci 0000:01:09.0: reg 10 io port: [0x8800-0x8807] [ 0.195246] pci 0000:01:09.0: reg 14 io port: [0x8c00-0x8c03] [ 0.195250] pci 0000:01:09.0: reg 18 io port: [0x9000-0x9007] [ 0.195255] pci 0000:01:09.0: reg 1c io port: [0x9400-0x9403] [ 0.195259] pci 0000:01:09.0: reg 20 io port: [0x9800-0x980f] [ 0.195264] pci 0000:01:09.0: reg 24 32bit mmio: [0xf1005000-0xf10053ff] [ 0.195269] pci 0000:01:09.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.195280] pci 0000:01:09.0: supports D1 D2 [ 0.195300] pci 0000:01:0a.0: reg 10 32bit mmio: [0xf1004000-0xf10047ff] [ 0.195305] pci 0000:01:0a.0: reg 14 32bit mmio: [0xf1000000-0xf1003fff] [ 0.195330] pci 0000:01:0a.0: supports D1 D2 [ 0.195332] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.195382] pci 0000:01:0a.0: PME# disabled [ 0.195447] pci 0000:00:09.0: transparent bridge [ 0.195495] pci 0000:00:09.0: bridge io port: [0x8000-0x9fff] [ 0.195498] pci 0000:00:09.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff] [ 0.195501] pci 0000:00:09.0: bridge 32bit mmio pref: [0xf4000000-0xf40fffff] [ 0.195539] pci 0000:02:00.0: reg 10 64bit mmio: [0xf3000000-0xf3003fff] [ 0.195545] pci 0000:02:00.0: reg 18 io port: [0xa000-0xa0ff] [ 0.195561] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.195586] pci 0000:02:00.0: supports D1 D2 [ 0.195588] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195640] pci 0000:02:00.0: PME# disabled [ 0.195717] pci 0000:00:0b.0: bridge io port: [0xa000-0xafff] [ 0.195720] pci 0000:00:0b.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff] [ 0.195751] pci 0000:00:0c.0: bridge io port: [0x7000-0x7fff] [ 0.195782] pci 0000:00:0d.0: bridge io port: [0x6000-0x6fff] [ 0.195805] pci 0000:05:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff] [ 0.195812] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.195818] pci 0000:05:00.0: reg 1c 64bit mmio: [0xec000000-0xecffffff] [ 0.195825] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.195870] pci 0000:00:0e.0: bridge 32bit mmio: [0xe8000000-0xefffffff] [ 0.195874] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.195883] pci_bus 0000:00: on NUMA node 0 [ 0.195887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.196070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.242427] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.242966] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.243506] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.244052] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.244590] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.245202] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.245739] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.246352] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.246891] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.247428] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.248047] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.248588] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.249124] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.249744] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.250289] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.250832] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.251463] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.251762] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.252066] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.252362] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.252611] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.252914] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.253314] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.253745] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.254144] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.254544] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.254977] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.255376] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.255774] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.256212] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.256619] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.257025] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.257419] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.257480] vgaarb: loaded [ 0.257616] SCSI subsystem initialized [ 0.257713] libata version 3.00 loaded. [ 0.257769] usbcore: registered new interface driver usbfs [ 0.257827] usbcore: registered new interface driver hub [ 0.257893] usbcore: registered new device driver usb [ 0.258036] ACPI: WMI: Mapper loaded [ 0.258082] PCI: Using ACPI for IRQ routing [ 0.258255] NetLabel: Initializing [ 0.258302] NetLabel: domain hash size = 128 [ 0.258348] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.258406] NetLabel: unlabeled traffic allowed by default [ 0.258476] Switching to clocksource jiffies [ 0.260208] AppArmor: AppArmor Filesystem Enabled [ 0.260265] pnp: PnP ACPI init [ 0.260317] ACPI: bus type pnp registered [ 0.263870] pnp: PnP ACPI: found 13 devices [ 0.263918] ACPI: ACPI bus type pnp unregistered [ 0.263967] PnPBIOS: Disabled by ACPI PNP [ 0.264018] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.264069] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.264120] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.264170] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.264221] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.264272] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.264329] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.264379] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.264430] system 00:02: ioport range 0x295-0x314 has been reserved [ 0.264480] system 00:02: ioport range 0x290-0x294 has been reserved [ 0.264531] system 00:02: ioport range 0x294-0x297 could not be reserved [ 0.264586] system 00:0b: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.264640] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved [ 0.264691] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.264743] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.264794] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.264846] system 00:0c: iomem range 0xbfff0000-0xbfffffff could not be reserved [ 0.264907] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.264958] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.265010] system 00:0c: iomem range 0x100000-0xbffeffff could not be reserved [ 0.265071] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.265132] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.299829] Switching to clocksource acpi_pm [ 0.300110] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.300147] pci 0000:00:09.0: IO window: 0x8000-0x9fff [ 0.300197] pci 0000:00:09.0: MEM window: 0xf0000000-0xf1ffffff [ 0.300248] pci 0000:00:09.0: PREFETCH window: 0xf4000000-0xf40fffff [ 0.300301] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.300351] pci 0000:00:0b.0: IO window: 0xa000-0xafff [ 0.300400] pci 0000:00:0b.0: MEM window: 0xf2000000-0xf3ffffff [ 0.300451] pci 0000:00:0b.0: PREFETCH window: 0xf4200000-0xf42fffff [ 0.300503] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.300552] pci 0000:00:0c.0: IO window: 0x7000-0x7fff [ 0.300602] pci 0000:00:0c.0: MEM window: disabled [ 0.300650] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.300700] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.300750] pci 0000:00:0d.0: IO window: 0x6000-0x6fff [ 0.300800] pci 0000:00:0d.0: MEM window: disabled [ 0.300848] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.300899] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 [ 0.300948] pci 0000:00:0e.0: IO window: disabled [ 0.300997] pci 0000:00:0e.0: MEM window: 0xe8000000-0xefffffff [ 0.301050] pci 0000:00:0e.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff [ 0.301117] pci 0000:00:09.0: setting latency timer to 64 [ 0.301122] pci 0000:00:0b.0: setting latency timer to 64 [ 0.301126] pci 0000:00:0c.0: setting latency timer to 64 [ 0.301131] pci 0000:00:0d.0: setting latency timer to 64 [ 0.301136] pci 0000:00:0e.0: setting latency timer to 64 [ 0.301140] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.301142] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.301145] pci_bus 0000:01: resource 0 io: [0x8000-0x9fff] [ 0.301148] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf1ffffff] [ 0.301151] pci_bus 0000:01: resource 2 pref mem [0xf4000000-0xf40fffff] [ 0.301154] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.301156] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.301159] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.301162] pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf3ffffff] [ 0.301164] pci_bus 0000:02: resource 2 pref mem [0xf4200000-0xf42fffff] [ 0.301167] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff] [ 0.301170] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff] [ 0.301173] pci_bus 0000:05: resource 1 mem: [0xe8000000-0xefffffff] [ 0.301176] pci_bus 0000:05: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.301212] NET: Registered protocol family 2 [ 0.301338] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.301716] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.302523] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.302971] TCP: Hash tables configured (established 131072 bind 65536) [ 0.303022] TCP reno registered [ 0.303157] NET: Registered protocol family 1 [ 0.328099] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328151] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.328204] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328255] pci 0000:00:0b.0: Linking AER extended capability [ 0.328337] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328388] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.328442] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328491] pci 0000:00:0c.0: Linking AER extended capability [ 0.328575] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328626] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.328680] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328729] pci 0000:00:0d.0: Linking AER extended capability [ 0.328817] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328868] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.328921] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.328970] pci 0000:00:0e.0: Linking AER extended capability [ 0.329039] pci 0000:05:00.0: Boot video device [ 0.329231] cpufreq-nforce2: No nForce2 chipset. [ 0.329300] Scanning for low memory corruption every 60 seconds [ 0.329473] audit: initializing netlink socket (disabled) [ 0.329529] type=2000 audit(1267869105.329:1): initialized [ 0.338016] highmem bounce pool size: 64 pages [ 0.338067] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.339401] VFS: Disk quotas dquot_6.5.2 [ 0.339497] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.340037] fuse init (API version 7.13) [ 0.340150] msgmni has been set to 1652 [ 0.340375] alg: No test for stdrng (krng) [ 0.340429] io scheduler noop registered [ 0.340476] io scheduler anticipatory registered [ 0.340523] io scheduler deadline registered [ 0.340603] io scheduler cfq registered (default) [ 0.340769] alloc irq_desc for 24 on node -1 [ 0.340771] alloc kstat_irqs on node -1 [ 0.340780] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.340786] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.340843] alloc irq_desc for 25 on node -1 [ 0.340845] alloc kstat_irqs on node -1 [ 0.340850] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.340853] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.340906] alloc irq_desc for 26 on node -1 [ 0.340908] alloc kstat_irqs on node -1 [ 0.340913] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.340917] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.340972] alloc irq_desc for 27 on node -1 [ 0.340974] alloc kstat_irqs on node -1 [ 0.340978] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X [ 0.340982] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.341027] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.342468] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.342612] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.342675] ACPI: Power Button [PWRB] [ 0.342771] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.342831] ACPI: Power Button [PWRF] [ 0.343304] processor LNXCPU:00: registered as cooling_device0 [ 0.343382] processor LNXCPU:01: registered as cooling_device1 [ 0.347333] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.347461] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.347584] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.347855] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.348020] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.348951] brd: module loaded [ 0.349391] loop: module loaded [ 0.349503] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.349705] sata_sil 0000:01:09.0: version 2.4 [ 0.349909] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 0.349961] alloc irq_desc for 17 on node -1 [ 0.349963] alloc kstat_irqs on node -1 [ 0.349972] sata_sil 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 0.350054] sata_sil 0000:01:09.0: Applying R_ERR on DMA activate FIS errata fix [ 0.350197] isapnp: Scanning for PnP cards... [ 0.399167] scsi0 : sata_sil [ 0.442663] scsi1 : sata_sil [ 0.485922] scsi2 : sata_sil [ 0.497934] Freeing initrd memory: 13605k freed [ 0.529211] scsi3 : sata_sil [ 0.529297] ata1: SATA max UDMA/100 mmio m1024@0xf1005000 tf 0xf1005080 irq 17 [ 0.529357] ata2: SATA max UDMA/100 mmio m1024@0xf1005000 tf 0xf10050c0 irq 17 [ 0.529418] ata3: SATA max UDMA/100 mmio m1024@0xf1005000 tf 0xf1005280 irq 17 [ 0.529478] ata4: SATA max UDMA/100 mmio m1024@0xf1005000 tf 0xf10052c0 irq 17 [ 0.529593] sata_nv 0000:00:07.0: version 3.5 [ 0.529868] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.529918] alloc irq_desc for 23 on node -1 [ 0.529919] alloc kstat_irqs on node -1 [ 0.529924] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.530016] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.530096] scsi4 : sata_nv [ 0.530196] scsi5 : sata_nv [ 0.530374] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23 [ 0.530425] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23 [ 0.530750] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.530800] alloc irq_desc for 22 on node -1 [ 0.530801] alloc kstat_irqs on node -1 [ 0.530806] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.530895] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.530948] scsi6 : sata_nv [ 0.531049] scsi7 : sata_nv [ 0.531221] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe000 irq 22 [ 0.531272] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe008 irq 22 [ 0.531399] pata_amd 0000:00:06.0: version 0.4.1 [ 0.531430] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.531482] scsi8 : pata_amd [ 0.531587] scsi9 : pata_amd [ 0.532237] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.532288] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.532925] Fixed MDIO Bus: probed [ 0.532997] PPP generic driver version 2.4.2 [ 0.533095] tun: Universal TUN/TAP device driver, 1.6 [ 0.533143] tun: (C) 1999-2004 Max Krasnyansky [ 0.533267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.533536] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.533585] alloc irq_desc for 21 on node -1 [ 0.533587] alloc kstat_irqs on node -1 [ 0.533592] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.533659] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.533661] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.533735] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.533816] ehci_hcd 0000:00:02.1: debug port 1 [ 0.533866] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.533878] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 [ 0.548015] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.548141] usb usb1: configuration #1 chosen from 1 choice [ 0.548213] hub 1-0:1.0: USB hub found [ 0.548266] hub 1-0:1.0: 10 ports detected [ 0.548363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.548630] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.548679] alloc irq_desc for 20 on node -1 [ 0.548681] alloc kstat_irqs on node -1 [ 0.548686] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.548752] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.548755] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.548829] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.548904] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf4100000 [ 0.606056] usb usb2: configuration #1 chosen from 1 choice [ 0.606124] hub 2-0:1.0: USB hub found [ 0.606176] hub 2-0:1.0: 10 ports detected [ 0.606266] uhci_hcd: USB Universal Host Controller Interface driver [ 0.606393] PNP: No PS/2 controller found. Probing ports directly. [ 0.609483] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.609535] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.609674] mice: PS/2 mouse device common for all mice [ 0.609824] rtc_cmos 00:04: RTC can wake from S4 [ 0.609908] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.609977] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.610108] device-mapper: uevent: version 1.0.3 [ 0.610232] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.610349] device-mapper: multipath: version 1.1.0 loaded [ 0.610398] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.610544] EISA: Probing bus 0 at eisa.0 [ 0.610595] Cannot allocate resource for EISA slot 1 [ 0.610651] Cannot allocate resource for EISA slot 6 [ 0.610699] Cannot allocate resource for EISA slot 7 [ 0.610747] Cannot allocate resource for EISA slot 8 [ 0.610796] EISA: Detected 0 cards. [ 0.610908] cpuidle: using governor ladder [ 0.610955] cpuidle: using governor menu [ 0.611384] TCP cubic registered [ 0.611554] NET: Registered protocol family 10 [ 0.611984] lo: Disabled Privacy Extensions [ 0.612313] NET: Registered protocol family 17 [ 0.612388] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 180 processors (2 cpu cores) (version 2.20.00) [ 0.612489] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8 [ 0.612539] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa [ 0.612588] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc [ 0.612637] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe [ 0.612686] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 [ 0.612766] Using IPI No-Shortcut mode [ 0.612865] PM: Checking image partition /dev/fastrcvg/swaplv [ 0.702773] isapnp: No Plug & Play device found [ 0.848024] ata1: SATA link down (SStatus 0 SControl 310) [ 0.996031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.000026] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.004973] ata5.00: ATA-7: WDC WD1500AHFD-00RAR1, 20.07P20, max UDMA/133 [ 1.005024] ata5.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.005129] ata7.00: ATA-7: Maxtor 6B300S0, BANC1B70, max UDMA/133 [ 1.005182] ata7.00: 586114704 sectors, multi 16: LBA48 NCQ (not used) [ 1.020915] ata5.00: configured for UDMA/133 [ 1.021106] ata7.00: configured for UDMA/133 [ 1.168037] ata2: SATA link down (SStatus 0 SControl 310) [ 1.172018] usb 2-7: new low speed USB device using ohci_hcd and address 2 [ 1.388086] usb 2-7: configuration #1 chosen from 1 choice [ 1.488028] ata3: SATA link down (SStatus 0 SControl 310) [ 1.696021] usb 2-8: new low speed USB device using ohci_hcd and address 3 [ 1.808027] ata4: SATA link down (SStatus 0 SControl 310) [ 1.808219] scsi 4:0:0:0: Direct-Access ATA WDC WD1500AHFD-0 20.0 PQ: 0 ANSI: 5 [ 1.808460] sd 4:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB) [ 1.808470] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 1.808620] sd 4:0:0:0: [sda] Write Protect is off [ 1.808669] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.808690] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.808869] sda: sda1 < sda5 sda6 > [ 1.827000] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.930081] usb 2-8: configuration #1 chosen from 1 choice [ 1.985171] usb 2-8: USB disconnect, address 3 [ 2.120020] ata6: SATA link down (SStatus 0 SControl 300) [ 2.120151] scsi 6:0:0:0: Direct-Access ATA Maxtor 6B300S0 BANC PQ: 0 ANSI: 5 [ 2.120300] sd 6:0:0:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB) [ 2.120311] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 2.120445] sd 6:0:0:0: [sdb] Write Protect is off [ 2.120494] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.120513] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.120677] sdb: sdb1 [ 2.143382] sd 6:0:0:0: [sdb] Attached SCSI disk [ 2.588026] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.596241] ata8.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133 [ 2.596292] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.604258] ata8.00: configured for UDMA/133 [ 2.604357] scsi 7:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5 [ 2.604504] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.604509] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 2.604650] sd 7:0:0:0: [sdc] Write Protect is off [ 2.604706] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.604726] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.604878] sdc: sdc1 < sdc5 sdc6 sdc7 sdc8 > [ 2.657265] sd 7:0:0:0: [sdc] Attached SCSI disk [ 2.776247] ata10.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A100, max UDMA/33 [ 2.776316] ata10: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0) ACPI=0x701f (600:60:0x1c) [ 2.792196] ata10.01: configured for UDMA/33 [ 2.797879] scsi 9:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A100 PQ: 0 ANSI: 5 [ 2.810197] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.810258] Uniform CD-ROM driver Revision: 3.20 [ 2.810366] sr 9:0:1:0: Attached scsi CD-ROM sr0 [ 2.810403] sr 9:0:1:0: Attached scsi generic sg3 type 5 [ 2.810462] PM: Resume from disk failed. [ 2.810474] registered taskstats version 1 [ 2.810807] Magic number: 2:722:878 [ 2.810944] rtc_cmos 00:04: setting system clock to 2010-03-06 09:51:48 UTC (1267869108) [ 2.812393] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.812444] EDD information not available. [ 2.812531] Freeing unused kernel memory: 660k freed [ 2.813027] Write protecting the kernel text: 4780k [ 2.813106] Write protecting the kernel read-only data: 1912k [ 2.827332] udev: starting version 151 [ 2.874987] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.875317] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 2.875370] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 2.875437] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2.875474] nv_probe: set workaround bit for reversed mac addr [ 2.897051] usb 2-8: new low speed USB device using ohci_hcd and address 4 [ 2.937504] sky2 driver version 1.25 [ 2.937612] sky2 0000:02:00.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 2.937745] sky2 0000:02:00.0: setting latency timer to 64 [ 2.937786] sky2 0000:02:00.0: Yukon-2 EC chip revision 1 [ 2.937948] alloc irq_desc for 28 on node -1 [ 2.937951] alloc kstat_irqs on node -1 [ 2.937965] sky2 0000:02:00.0: irq 28 for MSI/MSI-X [ 2.938746] sky2 eth0: addr 00:0f:ea:8c:2d:37 [ 2.938944] vga16fb: initializing [ 2.938949] vga16fb: mapped to 0xc00a0000 [ 2.939060] fb0: VGA16 VGA frame buffer device [ 2.940904] Floppy drive(s): fd0 is 1.44M [ 2.945360] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 2.945415] alloc irq_desc for 18 on node -1 [ 2.945417] alloc kstat_irqs on node -1 [ 2.945426] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 2.945783] usbcore: registered new interface driver hiddev [ 2.951478] input: Kingsis Peripherals Evoluent VerticalMouse 3 as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input3 [ 2.951563] generic-usb 0003:1A7C:0068.0001: input,hidraw0: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 3 ] on usb-0000:00:02.0-7/input0 [ 2.951591] usbcore: registered new interface driver usbhid [ 2.951593] usbhid: v2.6:USB HID core driver [ 3.000061] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f1004000-f10047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 3.098255] FDC 0 is a post-1991 82077 [ 3.098945] md: bind [ 3.118861] md: bind [ 3.121405] md: bind [ 3.129095] usb 2-8: configuration #1 chosen from 1 choice [ 3.146350] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4 [ 3.146419] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-8/input0 [ 3.148277] md: bind [ 3.151955] md: raid1 personality registered for level 1 [ 3.154549] Console: switching to colour frame buffer device 80x30 [ 3.164179] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.1/input/input5 [ 3.164276] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-8/input1 [ 3.195644] raid1: raid set md0 active with 2 out of 2 mirrors [ 3.200531] md0: detected capacity change from 0 to 205520896 [ 3.207139] md0: [ 3.207482] md: bind [ 3.220038] raid1: raid set md1 active with 2 out of 2 mirrors [ 3.226093] md1: detected capacity change from 0 to 149724659712 [ 3.232757] md: bind [ 3.236846] md1: unknown partition table [ 3.246881] unknown partition table [ 3.256682] raid1: raid set md2 active with 2 out of 2 mirrors [ 3.264120] md2: detected capacity change from 0 to 300082790400 [ 3.274287] md2: unknown partition table [ 3.397005] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x3f1 @ 7, addr 00:0f:ea:8c:2d:36 [ 3.413729] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 3.515404] md: linear personality registered for level -1 [ 3.517622] md: multipath personality registered for level -4 [ 3.519560] md: raid0 personality registered for level 0 [ 3.522985] async_tx: api initialized (async) [ 3.523620] xor: automatically using best checksumming function: pIII_sse [ 3.541006] pIII_sse : 7421.000 MB/sec [ 3.541009] xor: using function: pIII_sse (7421.000 MB/sec) [ 3.609056] raid6: int32x1 1122 MB/s [ 3.677011] raid6: int32x2 1095 MB/s [ 3.745049] raid6: int32x4 685 MB/s [ 3.813057] raid6: int32x8 518 MB/s [ 3.881027] raid6: mmxx1 2044 MB/s [ 3.949016] raid6: mmxx2 3643 MB/s [ 4.017012] raid6: sse1x1 1772 MB/s [ 4.085026] raid6: sse1x2 2644 MB/s [ 4.153016] raid6: sse2x1 2710 MB/s [ 4.221019] raid6: sse2x2 3716 MB/s [ 4.221021] raid6: using algorithm sse2x2 (3716 MB/s) [ 4.226071] md: raid6 personality registered for level 6 [ 4.226073] md: raid5 personality registered for level 5 [ 4.226075] md: raid4 personality registered for level 4 [ 4.232651] md: raid10 personality registered for level 10 [ 4.492228] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea56008fcfa7] [ 8.657194] EXT3-fs: INFO: recovery required on readonly filesystem. [ 8.657198] EXT3-fs: write access will be enabled during recovery. [ 9.855047] kjournald starting. Commit interval 5 seconds [ 9.855063] EXT3-fs: recovery complete. [ 9.855600] EXT3-fs: mounted filesystem with ordered data mode. [ 12.408522] Adding 3145720k swap on /dev/mapper/fastrcvg-swaplv. Priority:-1 extents:1 across:3145720k [ 13.331688] EXT3 FS on dm-3, internal journal [ 15.581817] kjournald starting. Commit interval 5 seconds [ 15.589484] EXT3 FS on dm-1, internal journal [ 15.589493] EXT3-fs: mounted filesystem with ordered data mode. [ 16.094582] udev: starting version 151 [ 16.372534] udev: renamed network interface eth0 to eth1 [ 16.387259] udev: renamed network interface eth1_rename to eth0 [ 17.007835] type=1505 audit(1267865522.694:2): operation="profile_load" pid=752 name="/sbin/dhclient3" [ 17.008081] type=1505 audit(1267865522.694:3): operation="profile_load" pid=752 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.008213] type=1505 audit(1267865522.694:4): operation="profile_load" pid=752 name="/usr/lib/connman/scripts/dhclient-script" [ 17.310861] type=1505 audit(1267865522.998:5): operation="profile_load" pid=801 name="/usr/sbin/ntpd" [ 17.587156] Linux agpgart interface v0.103 [ 17.589261] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 17.589280] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 [ 17.618985] gameport: EMU10K1 is pci0000:01:08.1/gameport0, io 0x8400, speed 59659kHz [ 17.635443] parport_pc 00:0a: reported by Plug and Play ACPI [ 17.635482] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.635880] lp: driver loaded but no devices found [ 17.714403] ppdev: user-space parallel port driver [ 17.732203] lp0: using parport0 (interrupt-driven). [ 18.853936] nvidia: module license 'NVIDIA' taints kernel. [ 18.853939] Disabling lock debugging due to kernel taint [ 20.017640] Linux video capture interface: v2.00 [ 20.540925] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 20.540932] nvidia 0000:05:00.0: setting latency timer to 64 [ 20.540936] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 20.541709] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.08 Thu Feb 25 04:11:58 PST 2010 [ 20.671483] bttv: driver version 0.9.18 loaded [ 20.671487] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 20.671916] bttv: Bt8xx card found (0). [ 20.672138] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 20.672143] alloc irq_desc for 19 on node -1 [ 20.672145] alloc kstat_irqs on node -1 [ 20.672153] bttv 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 20.672162] bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 19, latency: 32, mmio: 0xf4000000 [ 20.672417] bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003 [ 20.672420] bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected] [ 20.672423] IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 20.672458] bttv0: gpio: en=00000000, out=00000000 in=00fffff3 [init] [ 20.788921] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 20.788927] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 20.788954] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 20.876152] bttv0: Avermedia eeprom[0x4816]: tuner=5 radio:yes remote control:no [ 20.876157] bttv0: tuner type=5 [ 20.932190] tvaudio 2-005a: tda9873h found @ 0xb4 (bt878 #0 [sw]) [ 20.942365] tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 21.038826] tuner-simple 2-0061: creating new instance [ 21.038830] tuner-simple 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 21.039480] bttv0: registered device video0 [ 21.039504] bttv0: registered device vbi0 [ 21.039530] bttv0: registered device radio0 [ 21.040266] bttv0: PLL: 28636363 => 35468950 .. ok [ 21.073650] Bt87x 0000:01:07.1: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 21.073830] bt87x0: Using board 5, analog, digital (rate 48000 Hz) [ 21.074425] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 21.074430] alloc irq_desc for 16 on node -1 [ 21.074433] alloc kstat_irqs on node -1 [ 21.074441] EMU10K1_Audigy 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 21.113035] intel8x0_measure_ac97_clock: measured 54648 usecs (2680 samples) [ 21.113039] intel8x0: clocking to 46981 [ 21.155682] it87: Found IT8712F chip at 0x290, revision 5 [ 26.059956] SysRq : Kill All Tasks [ 28.533012] eth0: no IPv6 routers present [ 28.986798] udev: starting version 151 [ 80.154067] kjournald starting. Commit interval 5 seconds [ 80.212116] EXT3 FS on dm-6, internal journal [ 80.216234] EXT3-fs: mounted filesystem with ordered data mode. [ 80.450131] EXT4-fs (dm-7): mounted filesystem with ordered data mode [ 142.584420] Adding 3145720k swap on /dev/mapper/datacvg-swaplv. Priority:-2 extents:1 across:3145720k [ 144.394199] type=1505 audit(1267862050.081:6): operation="profile_replace" pid=2184 name="/sbin/dhclient3" [ 144.394762] type=1505 audit(1267862050.081:7): operation="profile_replace" pid=2184 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 144.395258] type=1505 audit(1267862050.081:8): operation="profile_replace" pid=2184 name="/usr/lib/connman/scripts/dhclient-script" [ 144.404259] type=1505 audit(1267862050.093:9): operation="profile_load" pid=2183 name="/usr/share/gdm/guest-session/Xsession" [ 144.419806] type=1505 audit(1267862050.105:10): operation="profile_load" pid=2187 name="/usr/bin/freshclam" [ 144.484755] type=1505 audit(1267862050.173:11): operation="profile_load" pid=2185 name="/usr/bin/evince" [ 144.489131] type=1505 audit(1267862050.178:12): operation="profile_load" pid=2185 name="/usr/bin/evince-previewer" [ 144.492269] type=1505 audit(1267862050.178:13): operation="profile_load" pid=2185 name="/usr/bin/evince-thumbnailer" [ 144.493654] type=1505 audit(1267862050.182:14): operation="profile_load" pid=2188 name="/usr/lib/libvirt/virt-aa-helper" [ 144.522452] type=1505 audit(1267862050.210:15): operation="profile_load" pid=2190 name="/usr/sbin/libvirtd"