[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2019-02-26 [ 0.000000] Linux version 5.3.0-10-generic (buildd@lgw01-amd64-010) (gcc version 9.2.1 20190905 (Ubuntu 9.2.1-7ubuntu2)) #11-Ubuntu SMP Mon Sep 9 15:12:17 UTC 2019 (Ubuntu 5.3.0-10.11-generic 5.3.0-rc8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-10-generic root=UUID=ff1caa1b-3c45-413d-9fa5-ba1772317cae ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c4e57fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c4e58000-0x00000000c5059fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c505a000-0x00000000db02bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db02c000-0x00000000dce8efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dce8f000-0x00000000dcf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc5d5e018-0xc5d6e057] usable ==> usable [ 0.000000] e820: update [mem 0xc5d5e018-0xc5d6e057] usable ==> usable [ 0.000000] e820: update [mem 0xc5d50018-0xc5d5d057] usable ==> usable [ 0.000000] e820: update [mem 0xc5d50018-0xc5d5d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c4e57fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4e58000-0x00000000c5059fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c505a000-0x00000000c5d50017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c5d50018-0x00000000c5d5d057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c5d5d058-0x00000000c5d5e017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c5d5e018-0x00000000c5d6e057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c5d6e058-0x00000000db02bfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000db02c000-0x00000000dce8efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dce8f000-0x00000000dcf9efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000dcfff000-0x00000000dcffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd. [ 0.000000] efi: ACPI=0xdcffe000 ACPI 2.0=0xdcffe014 SMBIOS=0xdce28000 [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem64: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem65: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem66: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem67: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem68: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: Removing 5 invalid memory map entries. [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 3137/0PRDX0, BIOS A05 12/25/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1696.089 MHz processor [ 0.000358] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000361] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000370] last_pfn = 0x11f600 max_arch_pfn = 0x400000000 [ 0.000376] MTRR default type: write-back [ 0.000377] MTRR fixed ranges enabled: [ 0.000378] 00000-9FFFF write-back [ 0.000380] A0000-BFFFF uncachable [ 0.000381] C0000-FFFFF write-protect [ 0.000382] MTRR variable ranges enabled: [ 0.000384] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000385] 1 base 00DE000000 mask 7FFE000000 uncachable [ 0.000387] 2 base 00DD000000 mask 7FFF000000 uncachable [ 0.000387] 3 disabled [ 0.000388] 4 disabled [ 0.000389] 5 disabled [ 0.000389] 6 disabled [ 0.000390] 7 disabled [ 0.000391] 8 disabled [ 0.000391] 9 disabled [ 0.000814] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000984] last_pfn = 0xdd000 max_arch_pfn = 0x400000000 [ 0.013781] check: Scanning 1 areas for low memory corruption [ 0.013787] Using GB pages for direct mapping [ 0.013789] BRK [0x60001000, 0x60001fff] PGTABLE [ 0.013792] BRK [0x60002000, 0x60002fff] PGTABLE [ 0.013793] BRK [0x60003000, 0x60003fff] PGTABLE [ 0.013853] BRK [0x60004000, 0x60004fff] PGTABLE [ 0.013855] BRK [0x60005000, 0x60005fff] PGTABLE [ 0.013989] BRK [0x60006000, 0x60006fff] PGTABLE [ 0.014059] BRK [0x60007000, 0x60007fff] PGTABLE [ 0.014180] BRK [0x60008000, 0x60008fff] PGTABLE [ 0.014321] BRK [0x60009000, 0x60009fff] PGTABLE [ 0.014441] BRK [0x6000a000, 0x6000afff] PGTABLE [ 0.014627] RAMDISK: [mem 0x3d2f0000-0x3fffdfff] [ 0.014637] ACPI: Early table checksum verification disabled [ 0.014641] ACPI: RSDP 0x00000000DCFFE014 000024 (v02 DELL ) [ 0.014646] ACPI: XSDT 0x00000000DCFFE170 0000AC (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014653] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002) [ 0.014660] ACPI: DSDT 0x00000000DCFEB000 00C12B (v02 DELL HSW-LPT 00000000 INTL 20120711) [ 0.014665] ACPI: FACS 0x00000000DCF9C000 000040 [ 0.014668] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002) [ 0.014672] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014676] ACPI: APIC 0x00000000DCFF9000 000098 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014680] ACPI: MCFG 0x00000000DCFF8000 00003C (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014684] ACPI: SSDT 0x00000000DCFEA000 000166 (v01 DELL PtidDevc 00001000 INTL 20120711) [ 0.014688] ACPI: SSDT 0x00000000DCFE9000 0004B5 (v01 DELL Cpu0Ist 00003000 INTL 20120711) [ 0.014692] ACPI: SSDT 0x00000000DCFE8000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711) [ 0.014696] ACPI: SSDT 0x00000000DCFE5000 002DD1 (v01 DELL SaSsdt 00003000 INTL 20120711) [ 0.014700] ACPI: UEFI 0x00000000DCFE4000 000042 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014703] ACPI: MSDM 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002) [ 0.014707] ACPI: BATB 0x00000000DCFE3000 000046 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014711] ACPI: FPDT 0x00000000DCFE2000 000064 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014715] ACPI: SLIC 0x00000000DCFE1000 000176 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014719] ACPI: UEFI 0x00000000DCFE0000 0002BA (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014722] ACPI: BGRT 0x00000000DCFDF000 000038 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014726] ACPI: CSRT 0x00000000DCFDE000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002) [ 0.014738] ACPI: Local APIC address 0xfee00000 [ 0.014856] No NUMA configuration found [ 0.014857] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff] [ 0.014873] NODE_DATA(0) allocated [mem 0x11f5d5000-0x11f5fffff] [ 0.015201] Zone ranges: [ 0.015202] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.015204] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.015206] Normal [mem 0x0000000100000000-0x000000011f5fffff] [ 0.015207] Device empty [ 0.015208] Movable zone start for each node [ 0.015213] Early memory node ranges [ 0.015214] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.015215] node 0: [mem 0x0000000000059000-0x000000000009cfff] [ 0.015216] node 0: [mem 0x0000000000100000-0x00000000c4e57fff] [ 0.015218] node 0: [mem 0x00000000c505a000-0x00000000db02bfff] [ 0.015219] node 0: [mem 0x00000000dcfff000-0x00000000dcffffff] [ 0.015219] node 0: [mem 0x0000000100000000-0x000000011f5fffff] [ 0.015534] Zeroed struct page in unavailable ranges: 21050 pages [ 0.015536] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff] [ 0.015538] On node 0 totalpages: 1024966 [ 0.015540] DMA zone: 64 pages used for memmap [ 0.015541] DMA zone: 21 pages reserved [ 0.015542] DMA zone: 3995 pages, LIFO batch:0 [ 0.015620] DMA32 zone: 13945 pages used for memmap [ 0.015622] DMA32 zone: 892459 pages, LIFO batch:63 [ 0.032703] Normal zone: 2008 pages used for memmap [ 0.032704] Normal zone: 128512 pages, LIFO batch:31 [ 0.034963] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff] [ 0.035043] ACPI: PM-Timer IO Port: 0x1808 [ 0.035046] ACPI: Local APIC address 0xfee00000 [ 0.035055] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.035056] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.035068] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.035071] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.035072] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.035074] ACPI: IRQ0 used by override. [ 0.035075] ACPI: IRQ9 used by override. [ 0.035078] Using ACPI (MADT) for SMP configuration information [ 0.035080] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.035094] smpboot: Allowing 8 CPUs, 6 hotplug CPUs [ 0.035121] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.035124] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.035126] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff] [ 0.035126] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff] [ 0.035127] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.035129] PM: Registered nosave memory: [mem 0xc4e58000-0xc5059fff] [ 0.035132] PM: Registered nosave memory: [mem 0xc5d50000-0xc5d50fff] [ 0.035134] PM: Registered nosave memory: [mem 0xc5d5d000-0xc5d5dfff] [ 0.035135] PM: Registered nosave memory: [mem 0xc5d5e000-0xc5d5efff] [ 0.035137] PM: Registered nosave memory: [mem 0xc5d6e000-0xc5d6efff] [ 0.035139] PM: Registered nosave memory: [mem 0xdb02c000-0xdce8efff] [ 0.035140] PM: Registered nosave memory: [mem 0xdce8f000-0xdcf9efff] [ 0.035141] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff] [ 0.035143] PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff] [ 0.035144] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff] [ 0.035145] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.035146] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff] [ 0.035146] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.035147] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff] [ 0.035148] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.035149] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.035151] [mem 0xdfa00000-0xf80f7fff] available for PCI devices [ 0.035153] Booting paravirtualized kernel on bare hardware [ 0.035156] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035165] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035583] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.035594] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.035595] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.035638] Built 1 zonelists, mobility grouping on. Total pages: 1008928 [ 0.035639] Policy zone: Normal [ 0.035641] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-10-generic root=UUID=ff1caa1b-3c45-413d-9fa5-ba1772317cae ro quiet splash vt.handoff=7 [ 0.036131] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.036316] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.036427] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.042335] Calgary: detecting Calgary via BIOS EBDA area [ 0.042337] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.059402] Memory: 3817900K/4099864K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 281964K reserved, 0K cma-reserved) [ 0.059612] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.059628] Kernel/User page tables isolation: enabled [ 0.059647] ftrace: allocating 43177 entries in 169 pages [ 0.084190] rcu: Hierarchical RCU implementation. [ 0.084192] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.084193] Tasks RCU enabled. [ 0.084194] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.084195] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.089219] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.089485] random: crng done (trusting CPU's manufacturer) [ 0.089521] vt handoff: transparent VT on vt#7 [ 0.089527] Console: colour dummy device 80x25 [ 0.089535] printk: console [tty0] enabled [ 0.089558] ACPI: Core revision 20190703 [ 0.089748] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.089761] APIC: Switch to symmetric I/O mode setup [ 0.090367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.109762] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872b8cbe04, max_idle_ns: 440795271592 ns [ 0.109767] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.17 BogoMIPS (lpj=6784356) [ 0.109770] pid_max: default: 32768 minimum: 301 [ 0.118946] LSM: Security Framework initializing [ 0.118961] Yama: becoming mindful. [ 0.119019] AppArmor: AppArmor initialized [ 0.119076] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.119086] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.119318] *** VALIDATE proc *** [ 0.119387] *** VALIDATE cgroup1 *** [ 0.119389] *** VALIDATE cgroup2 *** [ 0.119456] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.119472] process: using mwait in idle threads [ 0.119476] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.119477] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.119481] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.119482] Spectre V2 : Mitigation: Full generic retpoline [ 0.119483] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.119484] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.119486] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.119488] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.119492] MDS: Mitigation: Clear CPU buffers [ 0.119745] Freeing SMP alternatives memory: 36K [ 0.122512] TSC deadline timer enabled [ 0.122515] smpboot: CPU0: Intel(R) Pentium(R) 3556U @ 1.70GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.122671] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.122696] ... version: 3 [ 0.122697] ... bit width: 48 [ 0.122697] ... generic registers: 8 [ 0.122698] ... value mask: 0000ffffffffffff [ 0.122699] ... max period: 00007fffffffffff [ 0.122700] ... fixed-purpose events: 3 [ 0.122700] ... event mask: 00000007000000ff [ 0.122752] rcu: Hierarchical SRCU implementation. [ 0.124345] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.124466] smp: Bringing up secondary CPUs ... [ 0.124591] x86: Booting SMP configuration: [ 0.124592] .... node #0, CPUs: #1 [ 0.126813] smp: Brought up 1 node, 2 CPUs [ 0.126813] smpboot: Max logical packages: 4 [ 0.126813] smpboot: Total of 2 processors activated (6784.35 BogoMIPS) [ 0.126813] devtmpfs: initialized [ 0.126813] x86/mm: Memory block size: 128MB [ 0.126813] PM: Registering ACPI NVS region [mem 0xdce8f000-0xdcf9efff] (1114112 bytes) [ 0.126813] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.126813] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.126813] pinctrl core: initialized pinctrl subsystem [ 0.126813] PM: RTC time: 12:28:11, date: 2019-09-23 [ 0.126813] NET: Registered protocol family 16 [ 0.126813] audit: initializing netlink subsys (disabled) [ 0.126813] audit: type=2000 audit(1569241691.036:1): state=initialized audit_enabled=0 res=1 [ 0.126813] EISA bus registered [ 0.126813] cpuidle: using governor ladder [ 0.126813] cpuidle: using governor menu [ 0.126813] ACPI: bus type PCI registered [ 0.126813] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.126813] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.126813] PCI: not using MMCONFIG [ 0.126813] PCI: Using configuration type 1 for base access [ 0.126813] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.129781] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.131698] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.131698] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.133878] ACPI: Added _OSI(Module Device) [ 0.133880] ACPI: Added _OSI(Processor Device) [ 0.133881] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.133882] ACPI: Added _OSI(Processor Aggregator Device) [ 0.133883] ACPI: Added _OSI(Linux-Dell-Video) [ 0.133884] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.133886] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.153622] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.155880] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.157715] ACPI: Dynamic OEM Table Load: [ 0.157725] ACPI: SSDT 0xFFFF934499CEB800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.158387] ACPI: Dynamic OEM Table Load: [ 0.158398] ACPI: SSDT 0xFFFF93449A7CE800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.160207] ACPI: Dynamic OEM Table Load: [ 0.160214] ACPI: SSDT 0xFFFF934499C78400 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.161946] ACPI: EC: EC started [ 0.161948] ACPI: EC: interrupt blocked [ 0.163004] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.163006] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.163008] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.163009] ACPI: Interpreter enabled [ 0.163053] ACPI: (supports S0 S3 S4 S5) [ 0.163055] ACPI: Using IOAPIC for interrupt routing [ 0.163100] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.163822] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.163835] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.164217] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.179021] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.179028] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.179307] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.180150] PCI host bridge to bus 0000:00 [ 0.180154] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.180155] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.180157] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.180158] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.180160] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.180161] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.180163] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.180164] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.180165] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.180167] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.180168] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.180170] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.180171] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.180172] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.180174] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.180175] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.180177] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.180190] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.180457] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000 [ 0.180473] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.180482] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.180487] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.180505] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.180749] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.180763] pci 0000:00:03.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit] [ 0.181046] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.181068] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit] [ 0.181132] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.181369] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.181394] pci 0000:00:16.0: reg 0x10: [mem 0xf0619000-0xf061901f 64bit] [ 0.181468] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.181710] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.181731] pci 0000:00:1b.0: reg 0x10: [mem 0xf0614000-0xf0617fff 64bit] [ 0.181806] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.182042] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.182128] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.182457] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 0.182547] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.182878] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.182967] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.183295] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.183319] pci 0000:00:1d.0: reg 0x10: [mem 0xf061d000-0xf061d3ff] [ 0.183411] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.183655] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100 [ 0.184003] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.184020] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.184027] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.184035] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.184042] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.184049] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.184057] pci 0000:00:1f.2: reg 0x24: [mem 0xf061c000-0xf061c7ff] [ 0.184096] pci 0000:00:1f.2: PME# supported from D3hot [ 0.184325] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.184344] pci 0000:00:1f.3: reg 0x10: [mem 0xf0618000-0xf06180ff 64bit] [ 0.184365] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.184659] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.184736] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.184768] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.184798] pci 0000:02:00.0: reg 0x18: [mem 0xf0504000-0xf0504fff 64bit] [ 0.184816] pci 0000:02:00.0: reg 0x20: [mem 0xf0500000-0xf0503fff 64bit] [ 0.184928] pci 0000:02:00.0: supports D1 D2 [ 0.184930] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185080] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.185083] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.185087] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff] [ 0.185159] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000 [ 0.185194] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf047ffff 64bit] [ 0.185249] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.185329] pci 0000:03:00.0: supports D1 D2 [ 0.185331] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185450] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.185455] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.186579] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.186678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.186774] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.186868] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.186962] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.187056] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.187150] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.187244] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.187851] ACPI: EC: interrupt unblocked [ 0.187863] ACPI: EC: event unblocked [ 0.187871] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.187873] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.187972] SCSI subsystem initialized [ 0.187972] libata version 3.00 loaded. [ 0.187972] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.187972] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.187972] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.187972] vgaarb: loaded [ 0.187972] ACPI: bus type USB registered [ 0.187972] usbcore: registered new interface driver usbfs [ 0.187972] usbcore: registered new interface driver hub [ 0.187972] usbcore: registered new device driver usb [ 0.187972] pps_core: LinuxPPS API ver. 1 registered [ 0.187972] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.187972] PTP clock support registered [ 0.187972] EDAC MC: Ver: 3.0.0 [ 0.187972] Registered efivars operations [ 0.193837] PCI: Using ACPI for IRQ routing [ 0.195267] PCI: pci_cache_line_size set to 64 bytes [ 0.195312] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.195313] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.195314] e820: reserve RAM buffer [mem 0xc4e58000-0xc7ffffff] [ 0.195316] e820: reserve RAM buffer [mem 0xc5d50018-0xc7ffffff] [ 0.195317] e820: reserve RAM buffer [mem 0xc5d5e018-0xc7ffffff] [ 0.195318] e820: reserve RAM buffer [mem 0xdb02c000-0xdbffffff] [ 0.195319] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff] [ 0.195321] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff] [ 0.197767] NetLabel: Initializing [ 0.197767] NetLabel: domain hash size = 128 [ 0.197767] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.197774] NetLabel: unlabeled traffic allowed by default [ 0.198506] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.198512] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.201780] clocksource: Switched to clocksource tsc-early [ 0.218847] VFS: Disk quotas dquot_6.6.0 [ 0.218871] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.218911] *** VALIDATE hugetlbfs *** [ 0.219031] AppArmor: AppArmor Filesystem Enabled [ 0.219064] pnp: PnP ACPI init [ 0.219294] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.219297] system 00:00: [io 0xffff] has been reserved [ 0.219299] system 00:00: [io 0xffff] has been reserved [ 0.219300] system 00:00: [io 0xffff] has been reserved [ 0.219302] system 00:00: [io 0x0800-0x08fe] has been reserved [ 0.219304] system 00:00: [io 0x0900-0x09fe] has been reserved [ 0.219305] system 00:00: [io 0x0a00-0x0afe] has been reserved [ 0.219307] system 00:00: [io 0x0b00-0x0bfe] has been reserved [ 0.219310] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.219312] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.219319] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219396] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.219475] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.219479] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.219532] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.219567] pnp 00:04: Plug and Play ACPI device, IDs DLL0613 PNP0f03 (active) [ 0.219806] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.219808] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.219810] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.219811] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.219814] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.219816] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.219817] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.219819] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.219821] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.219823] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.219824] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved [ 0.219829] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220781] pnp: PnP ACPI: found 6 devices [ 0.222515] thermal_sys: Registered thermal governor 'fair_share' [ 0.222517] thermal_sys: Registered thermal governor 'bang_bang' [ 0.222518] thermal_sys: Registered thermal governor 'step_wise' [ 0.222518] thermal_sys: Registered thermal governor 'user_space' [ 0.222519] thermal_sys: Registered thermal governor 'power_allocator' [ 0.227010] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.227054] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.227060] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.227062] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.227064] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.227079] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff] [ 0.227092] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref] [ 0.227095] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.227098] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.227101] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.227106] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff] [ 0.227110] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff 64bit pref] [ 0.227115] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.227117] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.227122] pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff] [ 0.227131] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0480000-0xf048ffff pref] [ 0.227133] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.227137] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.227146] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.227147] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.227149] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.227150] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.227152] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.227153] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.227155] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.227156] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.227158] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.227159] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.227160] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.227162] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.227163] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.227165] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.227166] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.227168] pci_bus 0000:00: resource 19 [mem 0xdfa00000-0xfeafffff window] [ 0.227169] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.227171] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff] [ 0.227172] pci_bus 0000:01: resource 2 [mem 0xdfd00000-0xdfefffff 64bit pref] [ 0.227174] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.227175] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.227177] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.227342] NET: Registered protocol family 2 [ 0.227530] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.227564] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.227659] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.227748] TCP: Hash tables configured (established 32768 bind 32768) [ 0.227797] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.227815] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.227922] NET: Registered protocol family 1 [ 0.227928] NET: Registered protocol family 44 [ 0.227941] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.228038] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.228039] pci 0000:00:14.0: PCI INT A: not connected [ 0.228278] PCI: CLS 64 bytes, default 64 [ 0.228332] Trying to unpack rootfs image as initramfs... [ 0.388039] Initramfs unpacking failed: Decoding failed [ 0.395050] Freeing initrd memory: 46136K [ 0.395099] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.395102] software IO TLB: mapped [mem 0xd6b34000-0xdab34000] (64MB) [ 0.395333] check: Scanning for low memory corruption every 60 seconds [ 0.398006] Initialise system trusted keyrings [ 0.398017] Key type blacklist registered [ 0.398064] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.399966] zbud: loaded [ 0.400464] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.400684] fuse: init (API version 7.31) [ 0.400845] Platform Keyring initialized [ 0.408950] Key type asymmetric registered [ 0.408951] Asymmetric key parser 'x509' registered [ 0.408967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.409013] io scheduler mq-deadline registered [ 0.409756] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.409866] efifb: probing for efifb [ 0.409891] efifb: framebuffer at 0xe0000000, using 4128k, total 4128k [ 0.409892] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.409892] efifb: scrolling: redraw [ 0.409894] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.409989] Console: switching to colour frame buffer device 170x48 [ 0.410010] fb0: EFI VGA frame buffer device [ 0.410021] intel_idle: MWAIT substates: 0x11142120 [ 0.410022] intel_idle: v0.4.1 model 0x45 [ 0.410178] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.517960] ACPI: AC Adapter [ADP0] (on-line) [ 0.518062] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.518073] ACPI: Power Button [PWRB] [ 0.518114] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.518135] ACPI: Lid Switch [LID0] [ 0.518175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.518184] ACPI: Power Button [PWRF] [ 0.518868] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.518870] ACPI: Thermal Zone [TZ00] (28 C) [ 0.519262] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.519264] ACPI: Thermal Zone [TZ01] (30 C) [ 0.519443] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.525721] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.525763] Linux agpgart interface v0.103 [ 0.528295] loop: module loaded [ 0.528562] libphy: Fixed MDIO Bus: probed [ 0.528563] tun: Universal TUN/TAP device driver, 1.6 [ 0.528609] PPP generic driver version 2.4.2 [ 0.528651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.528654] ehci-pci: EHCI PCI platform driver [ 0.528835] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.528842] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.528854] ehci-pci 0000:00:1d.0: debug port 2 [ 0.532751] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.532767] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf061d000 [ 0.545831] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.546283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.546286] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.546287] usb usb1: Product: EHCI Host Controller [ 0.546289] usb usb1: Manufacturer: Linux 5.3.0-10-generic ehci_hcd [ 0.546290] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.546585] hub 1-0:1.0: USB hub found [ 0.546604] hub 1-0:1.0: 2 ports detected [ 0.546835] ehci-platform: EHCI generic platform driver [ 0.546853] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.546858] ohci-pci: OHCI PCI platform driver [ 0.546871] ohci-platform: OHCI generic platform driver [ 0.546880] uhci_hcd: USB Universal Host Controller Interface driver [ 0.547005] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 0.547007] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 0.547035] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.547041] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.548094] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 0.548099] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.548277] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.548279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.548280] usb usb2: Product: xHCI Host Controller [ 0.548282] usb usb2: Manufacturer: Linux 5.3.0-10-generic xhci-hcd [ 0.548283] usb usb2: SerialNumber: 0000:00:14.0 [ 0.548399] hub 2-0:1.0: USB hub found [ 0.548411] hub 2-0:1.0: 8 ports detected [ 0.549900] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.549906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.549909] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.549950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.549952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.549953] usb usb3: Product: xHCI Host Controller [ 0.549954] usb usb3: Manufacturer: Linux 5.3.0-10-generic xhci-hcd [ 0.549956] usb usb3: SerialNumber: 0000:00:14.0 [ 0.550089] hub 3-0:1.0: USB hub found [ 0.550098] hub 3-0:1.0: 4 ports detected [ 0.550309] usb: port power management may be unreliable [ 0.550618] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.553024] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.553028] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.553193] mousedev: PS/2 mouse device common for all mice [ 0.553381] rtc_cmos 00:01: RTC can wake from S4 [ 0.553537] rtc_cmos 00:01: registered as rtc0 [ 0.553555] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.553564] i2c /dev entries driver [ 0.553619] device-mapper: uevent: version 1.0.3 [ 0.553701] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.553726] platform eisa.0: Probing EISA bus 0 [ 0.553727] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.553729] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.553731] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.553732] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.553733] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.553734] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.553736] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.553737] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.553738] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.553739] platform eisa.0: EISA: Detected 0 cards [ 0.553749] intel_pstate: Intel P-state driver initializing [ 0.553900] ledtrig-cpu: registered to indicate activity on CPUs [ 0.553903] EFI Variables Facility v0.08 2004-May-17 [ 0.560518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.562443] NET: Registered protocol family 10 [ 0.574183] Segment Routing with IPv6 [ 0.574214] NET: Registered protocol family 17 [ 0.574269] Key type dns_resolver registered [ 0.574462] RAS: Correctable Errors collector initialized. [ 0.574499] microcode: sig=0x40651, pf=0x40, revision=0x25 [ 0.574537] microcode: Microcode Update Driver: v2.2. [ 0.574549] sched_clock: Marking stable (574197178, 335662)->(587379799, -12846959) [ 0.574695] registered taskstats version 1 [ 0.574705] Loading compiled-in X.509 certificates [ 0.577609] Loaded X.509 cert 'Build time autogenerated kernel key: 433921b71fd64227fb99bfe1143482d12b616a67' [ 0.577641] zswap: loaded using pool lzo/zbud [ 0.588351] Key type big_key registered [ 0.593652] Key type encrypted registered [ 0.593658] AppArmor: AppArmor sha1 policy hashing enabled [ 0.594131] integrity: Loading X.509 certificate: UEFI:db [ 0.594178] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.594179] integrity: Loading X.509 certificate: UEFI:db [ 0.594205] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.594580] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.596776] integrity: Loaded X.509 cert 'ubuntu Secure Boot Module Signature key: c7e670e4e8d16756139d4a6bcecbf6188b3fdcaf' [ 0.596778] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.597099] integrity: Loaded X.509 cert 'ubuntu Secure Boot Module Signature key: 1eeeb3b7e48b360b2d97db083d30fde96c467cb5' [ 0.597100] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.597411] integrity: Loaded X.509 cert 'ubuntu Secure Boot Module Signature key: 9b1a15c478dfe1261f6d3010ed796b2b40ea73d0' [ 0.597411] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.597725] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.598349] ima: No TPM chip found, activating TPM-bypass! [ 0.598353] ima: Allocated hash algorithm: sha1 [ 0.598360] No architecture policies found [ 0.598372] evm: Initialising EVM extended attributes: [ 0.598373] evm: security.selinux [ 0.598374] evm: security.SMACK64 [ 0.598374] evm: security.SMACK64EXEC [ 0.598375] evm: security.SMACK64TRANSMUTE [ 0.598375] evm: security.SMACK64MMAP [ 0.598376] evm: security.apparmor [ 0.598377] evm: security.ima [ 0.598377] evm: security.capability [ 0.598378] evm: HMAC attrs: 0x1 [ 0.599092] PM: Magic number: 3:944:481 [ 0.599196] rtc_cmos 00:01: setting system clock to 2019-09-23T12:28:12 UTC (1569241692) [ 0.599315] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 0.600754] Freeing unused decrypted memory: 2040K [ 0.601316] Freeing unused kernel image memory: 2668K [ 0.625851] Write protecting the kernel read-only data: 22528k [ 0.626479] Freeing unused kernel image memory: 2008K [ 0.626809] Freeing unused kernel image memory: 1416K [ 0.641049] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.641051] x86/mm: Checking user space page tables [ 0.655006] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.655009] Run /init as init process [ 0.885837] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.889830] usb 2-5: new high-speed USB device number 2 using xhci_hcd [ 0.990662] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 0.992545] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.007020] libphy: r8169: probed [ 1.007224] r8169 0000:02:00.0 eth0: RTL8168gu/8111gu, e0:db:55:ee:8e:76, XID 509, IRQ 44 [ 1.007226] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.011224] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 1.011247] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.012147] ahci 0000:00:1f.2: version 3.0 [ 1.025789] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x2 impl SATA mode [ 1.025794] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.032730] scsi host0: ahci [ 1.032940] scsi host1: ahci [ 1.033005] ata1: DUMMY [ 1.033008] ata2: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c180 irq 45 [ 1.042181] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 1.042184] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.042344] hub 1-1:1.0: USB hub found [ 1.042428] hub 1-1:1.0: 8 ports detected [ 1.051839] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.104818] usb 2-5: New USB device found, idVendor=0c45, idProduct=6a00, bcdDevice=38.02 [ 1.104820] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.104822] usb 2-5: Product: Integrated_Webcam_HD [ 1.104823] usb 2-5: Manufacturer: CNFDH20J453010000UX2 [ 1.241835] usb 2-7: new full-speed USB device number 3 using xhci_hcd [ 1.352922] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.353659] ata2.00: ATA-9: SanDisk SDSSDP064G, 3.2.0, max UDMA/133 [ 1.353661] ata2.00: 123091920 sectors, multi 1: LBA48 NCQ (depth 32) [ 1.355185] ata2.00: configured for UDMA/133 [ 1.365296] ahci 0000:00:1f.2: port does not support device sleep [ 1.365862] scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 [ 1.366324] sd 1:0:0:0: [sda] 123091920 512-byte logical blocks: (63.0 GB/58.7 GiB) [ 1.366328] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.366349] sd 1:0:0:0: [sda] Write Protect is off [ 1.366351] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.366371] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.369652] sda: sda1 sda2 [ 1.370443] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.390897] usb 2-7: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 1.390899] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.401784] tsc: Refined TSC clocksource calibration: 1696.073 MHz [ 1.401791] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns [ 1.401812] clocksource: Switched to clocksource tsc [ 1.517818] usb 2-8: new full-speed USB device number 4 using xhci_hcd [ 1.667631] usb 2-8: New USB device found, idVendor=04f3, idProduct=016c, bcdDevice=10.12 [ 1.667634] usb 2-8: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 1.667636] usb 2-8: Product: Touchscreen [ 1.667637] usb 2-8: Manufacturer: ELAN [ 1.674909] hidraw: raw HID events driver (C) Jiri Kosina [ 1.683854] usbcore: registered new interface driver usbhid [ 1.683856] usbhid: USB HID core driver [ 1.687612] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04F3:016C.0001/input/input6 [ 1.687719] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04F3:016C.0001/input/input7 [ 1.687769] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04F3:016C.0001/input/input8 [ 1.687866] hid-generic 0003:04F3:016C.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0 [ 1.743185] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4728] [ 1.768559] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.774256] psmouse serio1: synaptics: queried min coordinates: x [1364..], y [1218..] [ 1.774262] psmouse serio1: synaptics: Your touchpad (PNP: DLL0613 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 1.834393] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800/0x0, board id: 2820, fw id: 1490732 [ 1.872192] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.995336] systemd[1]: Inserted module 'autofs4' [ 2.041497] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) [ 2.057955] systemd[1]: Detected architecture x86-64. [ 2.060044] systemd[1]: Set hostname to . [ 2.060723] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 2.060818] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 2.066713] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7 [ 2.189467] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.189471] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.311305] systemd[1]: Listening on Journal Audit Socket. [ 2.311478] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.312186] systemd[1]: Created slice User and Session Slice. [ 2.312203] systemd[1]: Reached target Slices. [ 2.362095] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 2.391141] lp: driver loaded but no devices found [ 2.420470] ppdev: user-space parallel port driver [ 2.677846] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 3.123809] systemd-journald[295]: Received request to flush runtime journal from PID 1 [ 3.354547] input: DELL Wireless hotkeys as /devices/virtual/input/input10 [ 3.446250] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 3.493628] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11 [ 3.589553] mc: Linux media interface: v0.10 [ 3.613199] videodev: Linux video capture interface: v2.00 [ 3.648329] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:04F3:016C.0001/input/input12 [ 3.648496] hid-multitouch 0003:04F3:016C.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0 [ 3.682988] Bluetooth: Core ver 2.22 [ 3.683007] NET: Registered protocol family 31 [ 3.683008] Bluetooth: HCI device and connection manager initialized [ 3.683012] Bluetooth: HCI socket layer initialized [ 3.683014] Bluetooth: L2CAP socket layer initialized [ 3.683018] Bluetooth: SCO socket layer initialized [ 3.683313] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.683314] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.683315] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.683316] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.683316] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.706154] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.707091] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.714975] cryptd: max_cpu_qlen set to 1000 [ 3.788253] usbcore: registered new interface driver btusb [ 3.848061] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a00) [ 3.885082] usb 2-7: USB disconnect, device number 3 [ 3.886070] usbcore: registered new interface driver ath3k [ 3.900255] uvcvideo 2-5:1.0: Entity type for entity Extension 3 was not initialized! [ 3.900259] uvcvideo 2-5:1.0: Entity type for entity Processing 2 was not initialized! [ 3.900261] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized! [ 3.900336] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16 [ 3.900413] usbcore: registered new interface driver uvcvideo [ 3.900414] USB Video Class driver (1.1.1) [ 3.918352] checking generic (e0000000 408000) vs hw (e0000000 10000000) [ 3.918354] fb0: switching to inteldrmfb from EFI VGA [ 3.918442] Console: switching to colour dummy device 80x25 [ 3.918484] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.920136] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.920138] [drm] Driver supports precise vblank timestamp query. [ 3.920515] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.974742] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 3.977142] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.977438] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17 [ 3.982943] fbcon: i915drmfb (fb0) is primary device [ 3.983018] Console: switching to colour frame buffer device 170x48 [ 3.983041] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 4.005762] ath: phy0: WB335 1-ANT card detected [ 4.005764] ath: phy0: Set BT/WLAN RX diversity capability [ 4.024069] ath: phy0: Enable LNA combining [ 4.025866] ath: phy0: ASPM enabled: 0x42 [ 4.025868] ath: EEPROM regdomain: 0x60 [ 4.025869] ath: EEPROM indicates we should expect a direct regpair map [ 4.025871] ath: Country alpha2 being used: 00 [ 4.025872] ath: Regpair used: 0x60 [ 4.029483] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.030765] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffabdc40800000, irq=19 [ 4.088941] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.088945] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.088947] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.088948] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.088949] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.088951] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 4.088952] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 4.088954] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 4.142559] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 4.197796] usb 2-7: new full-speed USB device number 5 using xhci_hcd [ 4.268841] intel_rapl_common: Found RAPL domain package [ 4.268843] intel_rapl_common: Found RAPL domain core [ 4.268844] intel_rapl_common: Found RAPL domain uncore [ 4.268845] intel_rapl_common: Found RAPL domain dram [ 4.279251] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 5.127991] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.159576] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 5.159640] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 5.159695] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 5.159749] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 5.159802] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23 [ 5.169558] audit: type=1400 audit(1569241697.062:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=555 comm="apparmor_parser" [ 5.183572] audit: type=1400 audit(1569241697.078:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=560 comm="apparmor_parser" [ 5.189617] audit: type=1400 audit(1569241697.082:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=556 comm="apparmor_parser" [ 5.189623] audit: type=1400 audit(1569241697.082:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=556 comm="apparmor_parser" [ 5.189625] audit: type=1400 audit(1569241697.082:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=556 comm="apparmor_parser" [ 5.189628] audit: type=1400 audit(1569241697.082:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=556 comm="apparmor_parser" [ 5.212599] audit: type=1400 audit(1569241697.106:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=562 comm="apparmor_parser" [ 5.220237] audit: type=1400 audit(1569241697.114:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=564 comm="apparmor_parser" [ 5.242325] audit: type=1400 audit(1569241697.138:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=565 comm="apparmor_parser" [ 5.270507] audit: type=1400 audit(1569241697.166:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=566 comm="apparmor_parser" [ 8.185874] Generic Realtek PHY r8169-200:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 8.310345] r8169 0000:02:00.0 enp2s0: Link is Down [ 9.434808] usb 2-7: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 9.434811] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.547512] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.547515] Bluetooth: BNEP filters: protocol multicast [ 9.547520] Bluetooth: BNEP socket layer initialized [ 9.682328] wlp3s0: authenticate with 18:e8:29:57:1c:bd [ 9.696077] wlp3s0: send auth to 18:e8:29:57:1c:bd (try 1/3) [ 9.701445] wlp3s0: authenticated [ 9.705812] wlp3s0: associate with 18:e8:29:57:1c:bd (try 1/3) [ 9.715775] wlp3s0: RX AssocResp from 18:e8:29:57:1c:bd (capab=0x31 status=0 aid=3) [ 9.715867] wlp3s0: associated [ 9.745491] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 12.335435] rfkill: input handler disabled [ 88.176835] rfkill: input handler enabled [ 89.127721] Bluetooth: RFCOMM TTY layer initialized [ 89.127727] Bluetooth: RFCOMM socket layer initialized [ 89.127735] Bluetooth: RFCOMM ver 1.11 [ 92.680404] rfkill: input handler disabled [ 153.313326] Lockdown: fwupd: iopl is restricted; see man kernel_lockdown.7 [ 493.529786] rfkill: input handler enabled [ 495.232720] rfkill: input handler disabled [ 505.413564] rfkill: input handler enabled [ 509.663342] rfkill: input handler disabled