[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21 [ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=e56cb504-229d-4c7a-b16c-b259d05e992b ro noprompt quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ab224fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab225000-0x00000000ab22bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ab22c000-0x00000000ac15bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac15c000-0x00000000aca11fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aca12000-0x00000000c5c39fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c5c3a000-0x00000000c5ccbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c5ccc000-0x00000000c5d33fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c5d34000-0x00000000c5e78fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c5e79000-0x00000000c9f39fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c9f3a000-0x00000000c9ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xc5e3c000 ACPI=0xc5e3c000 SMBIOS=0xf04c0 MPS=0xfd470 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z97X-UD5H/Z97X-UD5H, BIOS F10 08/03/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back [ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable [ 0.000000] 6 base 00CB000000 mask 7FFF000000 uncachable [ 0.000000] 7 base 042FE00000 mask 7FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 16302M [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: -256M [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: -1G [ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: -256M [ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: -1G [ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: -256M [ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: -1G [ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: -256M [ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: -1G [ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: -256M [ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: -1G [ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: -256M [ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] *BAD*gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: -1G [ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 2M [ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 2M [ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 10 lose cover RAM: 2M [ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 10 lose cover RAM: 2M [ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 10 lose cover RAM: 2M [ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 10 lose cover RAM: 2M [ 0.000000] *BAD*gran_size: 4M chunk_size: 512M num_reg: 10 lose cover RAM: -254M [ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 10 lose cover RAM: 2M [ 0.000000] *BAD*gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: -1022M [ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 6M [ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 10 lose cover RAM: 6M [ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 10 lose cover RAM: 6M [ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 10 lose cover RAM: 6M [ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 10 lose cover RAM: 6M [ 0.000000] *BAD*gran_size: 8M chunk_size: 512M num_reg: 10 lose cover RAM: -250M [ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 10 lose cover RAM: 6M [ 0.000000] *BAD*gran_size: 8M chunk_size: 2G num_reg: 10 lose cover RAM: -1018M [ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 62M [ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 10 lose cover RAM: 14M [ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 10 lose cover RAM: 14M [ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 10 lose cover RAM: 14M [ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 10 lose cover RAM: 14M [ 0.000000] *BAD*gran_size: 16M chunk_size: 512M num_reg: 10 lose cover RAM: -242M [ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 10 lose cover RAM: 14M [ 0.000000] *BAD*gran_size: 16M chunk_size: 2G num_reg: 10 lose cover RAM: -1010M [ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 10 lose cover RAM: 46M [ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 10 lose cover RAM: 46M [ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 10 lose cover RAM: 46M [ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 10 lose cover RAM: 46M [ 0.000000] *BAD*gran_size: 32M chunk_size: 512M num_reg: 10 lose cover RAM: -210M [ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 10 lose cover RAM: 46M [ 0.000000] *BAD*gran_size: 32M chunk_size: 2G num_reg: 10 lose cover RAM: -978M [ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 8 lose cover RAM: 110M [ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 8 lose cover RAM: 110M [ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 9 lose cover RAM: 110M [ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 10 lose cover RAM: 110M [ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 9 lose cover RAM: 110M [ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 10 lose cover RAM: 110M [ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 7 lose cover RAM: 174M [ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 9 lose cover RAM: 174M [ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 10 lose cover RAM: 174M [ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 9 lose cover RAM: 174M [ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 10 lose cover RAM: 174M [ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 5 lose cover RAM: 430M [ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 5 lose cover RAM: 430M [ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 6 lose cover RAM: 430M [ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 7 lose cover RAM: 430M [ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 5 lose cover RAM: 430M [ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 6 lose cover RAM: 430M [ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 7 lose cover RAM: 430M [ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 4 lose cover RAM: 942M [ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 4 lose cover RAM: 942M [ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 3 lose cover RAM: 1966M [ 0.000000] mtrr_cleanup: can not find optimal value [ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd780-0x000fd78f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x213b3e000, 0x213b3efff] PGTABLE [ 0.000000] BRK [0x213b3f000, 0x213b3ffff] PGTABLE [ 0.000000] BRK [0x213b40000, 0x213b40fff] PGTABLE [ 0.000000] BRK [0x213b41000, 0x213b41fff] PGTABLE [ 0.000000] BRK [0x213b42000, 0x213b42fff] PGTABLE [ 0.000000] BRK [0x213b43000, 0x213b43fff] PGTABLE [ 0.000000] BRK [0x213b44000, 0x213b44fff] PGTABLE [ 0.000000] BRK [0x213b45000, 0x213b45fff] PGTABLE [ 0.000000] BRK [0x213b46000, 0x213b46fff] PGTABLE [ 0.000000] BRK [0x213b47000, 0x213b47fff] PGTABLE [ 0.000000] BRK [0x213b48000, 0x213b48fff] PGTABLE [ 0.000000] BRK [0x213b49000, 0x213b49fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x308ef000-0x3446efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000C5E3C000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000C5E3C080 000084 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000C5E4DA10 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000C5E3C1A0 01186B (v02 ALASKA A M I 00000088 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000C5E77080 000040 [ 0.000000] ACPI: APIC 0x00000000C5E4DB20 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000C5E4DBB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000C5E4DC00 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C5E4E7F0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000C5E4ED30 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000C5E4F8A8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000C5E4F8E8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000C5E4F920 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000C5E4FC90 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: BGRT 0x00000000C5E557F0 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000C5E55828 0000B8 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x42fdd5000-0x42fdfffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000042fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ab224fff] [ 0.000000] node 0: [mem 0x00000000ab22c000-0x00000000ac15bfff] [ 0.000000] node 0: [mem 0x00000000aca12000-0x00000000c5c39fff] [ 0.000000] node 0: [mem 0x00000000c5ccc000-0x00000000c5d33fff] [ 0.000000] node 0: [mem 0x00000000c9fff000-0x00000000c9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000042fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fdfffff] [ 0.000000] On node 0 totalpages: 4149635 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12560 pages used for memmap [ 0.000000] DMA32 zone: 803814 pages, LIFO batch:31 [ 0.000000] Normal zone: 52216 pages used for memmap [ 0.000000] Normal zone: 3341824 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab225000-0xab22bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xac15c000-0xaca11fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc5c3a000-0xc5ccbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc5d34000-0xc5e78fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc5e79000-0xc9f39fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9f3a000-0xc9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4084769 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=e56cb504-229d-4c7a-b16c-b259d05e992b ro noprompt quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 15942396K/16598540K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 656144K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39065 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 39 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.000000] DMAR: RMRR base: 0x000000c9e7c000 end: 0x000000c9e8afff [ 0.000000] DMAR: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff [ 0.000000] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3991.068 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7982.13 BogoMIPS (lpj=15964272) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028469] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028507] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028537] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028666] CPU: Physical Processor ID: 0 [ 0.028666] CPU: Processor Core ID: 0 [ 0.028672] mce: CPU supports 9 MCE banks [ 0.028677] CPU0: Thermal monitoring enabled (TM1) [ 0.028686] process: using mwait in idle threads [ 0.028687] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.028688] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.028689] Spectre V2 : Mitigation: Full generic retpoline [ 0.028689] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.028689] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028883] Freeing SMP alternatives memory: 36K [ 0.033487] TSC deadline timer enabled [ 0.033488] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.033528] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.033551] ... version: 3 [ 0.033551] ... bit width: 48 [ 0.033551] ... generic registers: 4 [ 0.033552] ... value mask: 0000ffffffffffff [ 0.033552] ... max period: 00007fffffffffff [ 0.033552] ... fixed-purpose events: 3 [ 0.033553] ... event mask: 000000070000000f [ 0.033572] Hierarchical SRCU implementation. [ 0.034280] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.034288] smp: Bringing up secondary CPUs ... [ 0.034324] x86: Booting SMP configuration: [ 0.034325] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.036669] smp: Brought up 1 node, 8 CPUs [ 0.036669] smpboot: Max logical packages: 1 [ 0.036669] smpboot: Total of 8 processors activated (63857.08 BogoMIPS) [ 0.040338] devtmpfs: initialized [ 0.040338] x86/mm: Memory block size: 128MB [ 0.040675] evm: security.selinux [ 0.040675] evm: security.SMACK64 [ 0.040675] evm: security.SMACK64EXEC [ 0.040675] evm: security.SMACK64TRANSMUTE [ 0.040676] evm: security.SMACK64MMAP [ 0.040676] evm: security.apparmor [ 0.040676] evm: security.ima [ 0.040677] evm: security.capability [ 0.040685] PM: Registering ACPI NVS region [mem 0xab225000-0xab22bfff] (28672 bytes) [ 0.040685] PM: Registering ACPI NVS region [mem 0xc5d34000-0xc5e78fff] (1331200 bytes) [ 0.040685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.040685] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.040685] pinctrl core: initialized pinctrl subsystem [ 0.040685] RTC time: 6:47:28, date: 05/07/18 [ 0.040685] NET: Registered protocol family 16 [ 0.040685] audit: initializing netlink subsys (disabled) [ 0.040685] audit: type=2000 audit(1525675647.040:1): state=initialized audit_enabled=0 res=1 [ 0.040685] cpuidle: using governor ladder [ 0.040685] cpuidle: using governor menu [ 0.040685] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.040685] ACPI: bus type PCI registered [ 0.040685] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.040685] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.040685] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.040685] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.040685] PCI: Using configuration type 1 for base access [ 0.040685] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.040729] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.040729] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.040730] ACPI: Added _OSI(Module Device) [ 0.040730] ACPI: Added _OSI(Processor Device) [ 0.040730] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.040730] ACPI: Added _OSI(Processor Aggregator Device) [ 0.040730] ACPI: Executed 15 blocks of module-level executable AML code [ 0.048386] ACPI: Dynamic OEM Table Load: [ 0.048386] ACPI: SSDT 0xFFFF9A65DC885400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.048386] ACPI: Dynamic OEM Table Load: [ 0.048386] ACPI: SSDT 0xFFFF9A65DCDCB000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.048542] ACPI: Dynamic OEM Table Load: [ 0.048542] ACPI: SSDT 0xFFFF9A65DCF9DE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.050326] ACPI: Interpreter enabled [ 0.050347] ACPI: (supports S0 S3 S4 S5) [ 0.050347] ACPI: Using IOAPIC for interrupt routing [ 0.050368] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.050918] ACPI: GPE 0x1E active on init [ 0.052003] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.052582] ACPI: Power Resource [PG00] (on) [ 0.052681] ACPI: Power Resource [PG01] (on) [ 0.052681] ACPI: Power Resource [PG02] (on) [ 0.060034] ACPI: Power Resource [FN00] (off) [ 0.060086] ACPI: Power Resource [FN01] (off) [ 0.060135] ACPI: Power Resource [FN02] (off) [ 0.060183] ACPI: Power Resource [FN03] (off) [ 0.060232] ACPI: Power Resource [FN04] (off) [ 0.060939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.060943] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.061128] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.061247] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.061248] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.061818] PCI host bridge to bus 0000:00 [ 0.061819] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.061820] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.061821] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.061822] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.061822] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.061823] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.061824] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.061825] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window] [ 0.061825] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.061830] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.061894] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.061918] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.062005] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.062012] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.062015] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.062018] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.062077] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.062082] pci 0000:00:03.0: reg 0x10: [mem 0xf7a34000-0xf7a37fff 64bit] [ 0.062158] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330 [ 0.062174] pci 0000:00:14.0: reg 0x10: [mem 0xf7a20000-0xf7a2ffff 64bit] [ 0.062221] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.062272] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000 [ 0.062289] pci 0000:00:16.0: reg 0x10: [mem 0xf7a3d000-0xf7a3d00f 64bit] [ 0.062339] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.062541] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.062555] pci 0000:00:19.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff] [ 0.062561] pci 0000:00:19.0: reg 0x14: [mem 0xf7a3c000-0xf7a3cfff] [ 0.062566] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.062613] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.062667] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320 [ 0.062685] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a3b000-0xf7a3b3ff] [ 0.062753] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.062809] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300 [ 0.062822] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a30000-0xf7a33fff 64bit] [ 0.062870] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.062925] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400 [ 0.062981] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.063068] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400 [ 0.063125] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.063211] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400 [ 0.063268] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.063355] pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400 [ 0.063542] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.063629] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320 [ 0.063647] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a3a000-0xf7a3a3ff] [ 0.063716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.063773] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100 [ 0.063910] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601 [ 0.063922] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.063928] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.063933] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.063938] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.063943] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.063948] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a39000-0xf7a397ff] [ 0.063975] pci 0000:00:1f.2: PME# supported from D3hot [ 0.068027] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500 [ 0.068040] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a38000-0xf7a380ff 64bit] [ 0.068055] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.068143] pci 0000:01:00.0: [10de:1180] type 00 class 0x030000 [ 0.068157] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.068165] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.068173] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref] [ 0.068178] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.068183] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.068193] pci 0000:01:00.0: BAR 3: assigned to efifb [ 0.068256] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.068267] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.080011] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.080013] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.080014] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.080016] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref] [ 0.080064] acpiphp: Slot [1] registered [ 0.080067] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.080122] pci 0000:03:00.0: [1969:e091] type 00 class 0x020000 [ 0.080153] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit] [ 0.080164] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f] [ 0.080270] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092015] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.092017] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.092019] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff] [ 0.092076] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401 [ 0.092196] pci 0000:04:00.0: supports D1 D2 [ 0.092197] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092244] pci 0000:00:1c.3: PCI bridge to [bus 04-05] [ 0.092352] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode) [ 0.092556] pci 0000:06:00.0: [1b4b:9172] type 00 class 0x010601 [ 0.092576] pci 0000:06:00.0: reg 0x10: [io 0xc040-0xc047] [ 0.092584] pci 0000:06:00.0: reg 0x14: [io 0xc030-0xc033] [ 0.092592] pci 0000:06:00.0: reg 0x18: [io 0xc020-0xc027] [ 0.092600] pci 0000:06:00.0: reg 0x1c: [io 0xc010-0xc013] [ 0.092608] pci 0000:06:00.0: reg 0x20: [io 0xc000-0xc00f] [ 0.092617] pci 0000:06:00.0: reg 0x24: [mem 0xf7810000-0xf78101ff] [ 0.092625] pci 0000:06:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref] [ 0.092637] pci 0000:06:00.0: Enabling fixed DMA alias to 00.1 [ 0.092672] pci 0000:06:00.0: PME# supported from D3hot [ 0.104011] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.104013] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] [ 0.104015] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf78fffff] [ 0.104814] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15) [ 0.104854] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 *10 11 12 14 15) [ 0.104894] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15) [ 0.104934] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15) [ 0.104973] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 *11 12 14 15) [ 0.105012] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled. [ 0.105051] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15) [ 0.105091] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15) [ 0.105553] SCSI subsystem initialized [ 0.105560] libata version 3.00 loaded. [ 0.105560] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.105560] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.105560] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.105560] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.105560] pci 0000:00:02.0: vgaarb: no bridge control possible [ 0.105560] vgaarb: loaded [ 0.105560] ACPI: bus type USB registered [ 0.105560] usbcore: registered new interface driver usbfs [ 0.105560] usbcore: registered new interface driver hub [ 0.105560] usbcore: registered new device driver usb [ 0.105560] EDAC MC: Ver: 3.0.0 [ 0.105560] Registered efivars operations [ 0.137651] PCI: Using ACPI for IRQ routing [ 0.137651] PCI: pci_cache_line_size set to 64 bytes [ 0.137651] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.137651] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.137651] e820: reserve RAM buffer [mem 0xab225000-0xabffffff] [ 0.137651] e820: reserve RAM buffer [mem 0xac15c000-0xafffffff] [ 0.137651] e820: reserve RAM buffer [mem 0xc5c3a000-0xc7ffffff] [ 0.137651] e820: reserve RAM buffer [mem 0xc5d34000-0xc7ffffff] [ 0.137651] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff] [ 0.137651] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff] [ 0.137651] NetLabel: Initializing [ 0.137651] NetLabel: domain hash size = 128 [ 0.137651] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.137651] NetLabel: unlabeled traffic allowed by default [ 0.137651] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.137651] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.141012] clocksource: Switched to clocksource hpet [ 0.147064] VFS: Disk quotas dquot_6.6.0 [ 0.147073] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.147132] AppArmor: AppArmor Filesystem Enabled [ 0.147144] pnp: PnP ACPI init [ 0.147360] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.147363] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.147427] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.147430] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.147443] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.147467] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.147469] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.147578] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.147579] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.147581] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 0.147583] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.147763] pnp 00:05: [dma 0 disabled] [ 0.147790] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.147823] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.147825] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.148313] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.148314] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.148315] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.148316] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.148316] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.148317] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.148318] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.148319] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.148320] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.148321] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.148322] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.148324] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.148465] pnp: PnP ACPI: found 8 devices [ 0.153996] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.154031] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.154033] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.154034] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.154036] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref] [ 0.154038] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.154045] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.154046] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.154049] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff] [ 0.154054] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.154072] pci 0000:00:1c.3: PCI bridge to [bus 04-05] [ 0.154079] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.154081] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] [ 0.154083] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf78fffff] [ 0.154089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.154090] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.154091] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.154091] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.154092] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.154093] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.154094] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.154094] pci_bus 0000:00: resource 11 [mem 0xcf200000-0xfeafffff window] [ 0.154095] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.154096] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.154097] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref] [ 0.154097] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.154098] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.154099] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.154100] pci_bus 0000:06: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.154327] NET: Registered protocol family 2 [ 0.154447] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.154565] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.154667] TCP: Hash tables configured (established 131072 bind 65536) [ 0.154690] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.154724] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.154777] NET: Registered protocol family 1 [ 0.196080] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.196086] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.196092] PCI: CLS 64 bytes, default 64 [ 0.196112] Unpacking initramfs... [ 0.673536] Freeing initrd memory: 60928K [ 0.673563] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.673565] software IO TLB [mem 0xb30a9000-0xb70a9000] (64MB) mapped at [0000000043a699aa-00000000b53fed06] [ 0.673791] Scanning for low memory corruption every 60 seconds [ 0.674168] Initialise system trusted keyrings [ 0.674174] Key type blacklist registered [ 0.674192] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.674772] zbud: loaded [ 0.675034] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.675103] fuse init (API version 7.26) [ 0.675799] Key type asymmetric registered [ 0.675799] Asymmetric key parser 'x509' registered [ 0.675814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.675835] io scheduler noop registered [ 0.675836] io scheduler deadline registered [ 0.675855] io scheduler cfq registered (default) [ 0.676405] efifb: probing for efifb [ 0.676413] efifb: framebuffer at 0xe9000000, using 3072k, total 3072k [ 0.676414] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.676414] efifb: scrolling: redraw [ 0.676415] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.676466] Console: switching to colour frame buffer device 128x48 [ 0.676474] fb0: EFI VGA frame buffer device [ 0.676478] intel_idle: MWAIT substates: 0x42120 [ 0.676478] intel_idle: v0.4.1 model 0x3C [ 0.676631] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.676714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.676730] ACPI: Power Button [PWRB] [ 0.676750] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.676754] ACPI: Sleep Button [SLPB] [ 0.676771] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.676782] ACPI: Power Button [PWRF] [ 0.677354] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.677458] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.677459] ACPI: Thermal Zone [TZ00] (28 C) [ 0.677631] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.677631] ACPI: Thermal Zone [TZ01] (30 C) [ 0.677717] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.698115] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.699176] Linux agpgart interface v0.103 [ 0.700221] loop: module loaded [ 0.700304] libphy: Fixed MDIO Bus: probed [ 0.700304] tun: Universal TUN/TAP device driver, 1.6 [ 0.700321] PPP generic driver version 2.4.2 [ 0.700341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.700342] ehci-pci: EHCI PCI platform driver [ 0.700404] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.700408] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.700416] ehci-pci 0000:00:1a.0: debug port 2 [ 0.704304] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.704313] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a3b000 [ 0.720011] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.720032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.720033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.720033] usb usb1: Product: EHCI Host Controller [ 0.720034] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd [ 0.720035] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.720124] hub 1-0:1.0: USB hub found [ 0.720127] hub 1-0:1.0: 2 ports detected [ 0.720263] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.720265] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.720273] ehci-pci 0000:00:1d.0: debug port 2 [ 0.724170] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.724178] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a3a000 [ 0.740033] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.740052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.740052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.740053] usb usb2: Product: EHCI Host Controller [ 0.740054] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd [ 0.740054] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.740135] hub 2-0:1.0: USB hub found [ 0.740137] hub 2-0:1.0: 2 ports detected [ 0.740211] ehci-platform: EHCI generic platform driver [ 0.740216] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.740218] ohci-pci: OHCI PCI platform driver [ 0.740223] ohci-platform: OHCI generic platform driver [ 0.740225] uhci_hcd: USB Universal Host Controller Interface driver [ 0.740287] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.740290] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.741350] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.741353] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.741429] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.741430] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.741431] usb usb3: Product: xHCI Host Controller [ 0.741432] usb usb3: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 0.741432] usb usb3: SerialNumber: 0000:00:14.0 [ 0.741511] hub 3-0:1.0: USB hub found [ 0.741525] hub 3-0:1.0: 14 ports detected [ 0.743645] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.743646] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.743668] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.743668] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.743669] usb usb4: Product: xHCI Host Controller [ 0.743670] usb usb4: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 0.743670] usb usb4: SerialNumber: 0000:00:14.0 [ 0.743750] hub 4-0:1.0: USB hub found [ 0.743759] hub 4-0:1.0: 6 ports detected [ 0.744997] i8042: PNP: No PS/2 controller found. [ 0.745091] mousedev: PS/2 mouse device common for all mice [ 0.745242] rtc_cmos 00:02: RTC can wake from S4 [ 0.745351] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.745373] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.745376] i2c /dev entries driver [ 0.745397] device-mapper: uevent: version 1.0.3 [ 0.745430] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.745434] intel_pstate: Intel P-state driver initializing [ 0.745673] ledtrig-cpu: registered to indicate activity on CPUs [ 0.745674] EFI Variables Facility v0.08 2004-May-17 [ 0.777296] NET: Registered protocol family 10 [ 0.779695] Segment Routing with IPv6 [ 0.779705] NET: Registered protocol family 17 [ 0.779735] Key type dns_resolver registered [ 0.779985] RAS: Correctable Errors collector initialized. [ 0.780011] microcode: sig=0x306c3, pf=0x2, revision=0x24 [ 0.780114] microcode: Microcode Update Driver: v2.2. [ 0.780119] sched_clock: Marking stable (780110938, 0)->(762240948, 17869990) [ 0.780253] registered taskstats version 1 [ 0.780259] Loading compiled-in X.509 certificates [ 0.781705] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208' [ 0.782298] Couldn't get size: 0x800000000000000e [ 0.782300] MODSIGN: Couldn't get UEFI db list [ 0.784095] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 0.784397] Couldn't get size: 0x800000000000000e [ 0.784398] MODSIGN: Couldn't get UEFI dbx list [ 0.784411] zswap: loaded using pool lzo/zbud [ 0.786592] Key type big_key registered [ 0.786594] Key type trusted registered [ 0.787603] Key type encrypted registered [ 0.787604] AppArmor: AppArmor sha1 policy hashing enabled [ 0.787606] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.787619] evm: HMAC attrs: 0x1 [ 0.788037] Magic number: 2:389:771 [ 0.788144] rtc_cmos 00:02: setting system clock to 2018-05-07 06:47:28 UTC (1525675648) [ 0.788166] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.788166] EDD information not available. [ 0.789527] Freeing unused kernel memory: 2404K [ 0.789527] Write protecting the kernel read-only data: 20480k [ 0.789808] Freeing unused kernel memory: 2008K [ 0.792032] Freeing unused kernel memory: 1904K [ 0.795544] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.795544] x86/mm: Checking user space page tables [ 0.798928] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.852518] ipmi message handler version 39.2 [ 0.852575] pps_core: LinuxPPS API ver. 1 registered [ 0.852576] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.853396] ipmi device interface [ 0.853561] PTP clock support registered [ 0.854692] ahci 0000:00:1f.2: version 3.0 [ 0.854849] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xc impl SATA mode [ 0.854851] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.856960] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.856961] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.864509] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [74:d4:35:ee:1a:6b] [ 0.870418] alx 0000:03:00.0 enp3s0: renamed from eth0 [ 0.870619] scsi host0: ahci [ 0.870691] scsi host1: ahci [ 0.870739] scsi host2: ahci [ 0.870781] scsi host3: ahci [ 0.872005] scsi host4: ahci [ 0.872047] scsi host5: ahci [ 0.872064] ata1: DUMMY [ 0.872064] ata2: DUMMY [ 0.872066] ata3: SATA max UDMA/133 abar m2048@0xf7a39000 port 0xf7a39200 irq 27 [ 0.872068] ata4: SATA max UDMA/133 abar m2048@0xf7a39000 port 0xf7a39280 irq 27 [ 0.872068] ata5: DUMMY [ 0.872068] ata6: DUMMY [ 0.872284] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.872318] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.872320] ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 0.872458] scsi host6: ahci [ 0.876004] scsi host7: ahci [ 0.876028] ata7: SATA max UDMA/133 abar m512@0xf7810000 port 0xf7810100 irq 28 [ 0.876030] ata8: SATA max UDMA/133 abar m512@0xf7810000 port 0xf7810180 irq 28 [ 0.919128] PKCS#7 signature not signed with a trusted key [ 0.919136] nvidia: loading out-of-tree module taints kernel. [ 0.919140] nvidia: module license 'NVIDIA' taints kernel. [ 0.919140] Disabling lock debugging due to kernel taint [ 0.921980] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 0.926409] nvidia-nvlink: Nvlink Core is being initialized, major device number 241 [ 0.926621] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 0.926681] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.48 Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts) [ 0.931485] PKCS#7 signature not signed with a trusted key [ 0.947154] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.964579] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.48 Wed Mar 21 23:48:34 PDT 2018 [ 0.964854] PKCS#7 signature not signed with a trusted key [ 0.965166] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 0.965167] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 1.015112] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d4:35:ee:1a:5d [ 1.015113] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.015159] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.015199] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 1.015489] [drm] Memory usable by graphics device = 2048M [ 1.015490] checking generic (e9000000 300000) vs hw (d0000000 10000000) [ 1.015491] [drm] Replacing VGA console driver [ 1.015655] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.021571] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.021572] [drm] Driver supports precise vblank timestamp query. [ 1.026145] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 1 [ 1.027023] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.027241] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.060017] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.076004] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.076012] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.080322] [drm] Cannot find any crtc or sizes [ 1.187403] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.187417] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.188358] ata4.00: ATA-9: ST3000DM001-1ER166, CC25, max UDMA/133 [ 1.188359] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.188451] ata3.00: ATA-9: ST3000DM001-1ER166, CC25, max UDMA/133 [ 1.188452] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.189486] ata4.00: configured for UDMA/133 [ 1.189577] ata3.00: configured for UDMA/133 [ 1.189770] scsi 2:0:0:0: Direct-Access ATA ST3000DM001-1ER1 CC25 PQ: 0 ANSI: 5 [ 1.190058] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.190126] sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.190127] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 1.190138] sd 2:0:0:0: [sda] Write Protect is off [ 1.190140] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.190177] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.190208] scsi 3:0:0:0: Direct-Access ATA ST3000DM001-1ER1 CC25 PQ: 0 ANSI: 5 [ 1.190371] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.190379] sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.190381] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 1.190391] sd 3:0:0:0: [sdb] Write Protect is off [ 1.190393] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.190415] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.191392] ata8: SATA link down (SStatus 0 SControl 300) [ 1.216342] usb 1-1: New USB device found, idVendor=8087, idProduct=8009 [ 1.216343] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.216585] hub 1-1:1.0: USB hub found [ 1.216704] hub 1-1:1.0: 6 ports detected [ 1.222881] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.223284] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.224166] usb 3-3: New USB device found, idVendor=045b, idProduct=0209 [ 1.224167] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.224438] hub 3-3:1.0: USB hub found [ 1.224457] hub 3-3:1.0: 4 ports detected [ 1.232340] usb 2-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.232341] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.232487] hub 2-1:1.0: USB hub found [ 1.232589] hub 2-1:1.0: 8 ports detected [ 1.260085] sda: sda1 sda2 sda3 [ 1.260501] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.352007] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.352178] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.353455] ata7.00: ATA-8: Hitachi HUS724030ALE640, MJ8OA3B0, max UDMA/133 [ 1.353456] ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.354944] ata7.00: configured for UDMA/133 [ 1.355059] scsi 6:0:0:0: Direct-Access ATA Hitachi HUS72403 A3B0 PQ: 0 ANSI: 5 [ 1.355205] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1.355223] sd 6:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.355224] sd 6:0:0:0: [sdc] 4096-byte physical blocks [ 1.355236] sd 6:0:0:0: [sdc] Write Protect is off [ 1.355237] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.355255] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.377439] usb 4-3: New USB device found, idVendor=045b, idProduct=0210 [ 1.377440] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.378769] hub 4-3:1.0: USB hub found [ 1.379000] hub 4-3:1.0: 4 ports detected [ 1.392196] sdc: sdc1 sdc2 [ 1.392520] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 1.511992] usb 3-3.1: new high-speed USB device number 3 using xhci_hcd [ 1.613429] usb 3-3.1: New USB device found, idVendor=2109, idProduct=2812 [ 1.613430] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.613431] usb 3-3.1: Product: USB2.0 Hub [ 1.613432] usb 3-3.1: Manufacturer: VIA Labs, Inc. [ 1.613922] hub 3-3.1:1.0: USB hub found [ 1.614059] hub 3-3.1:1.0: 4 ports detected [ 1.692026] usb 4-3.1: new SuperSpeed USB device number 3 using xhci_hcd [ 1.695940] tsc: Refined TSC clocksource calibration: 3990.758 MHz [ 1.695945] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x730c85718cb, max_idle_ns: 881591244843 ns [ 1.944309] usb 4-3.1: New USB device found, idVendor=2109, idProduct=0812 [ 1.944310] usb 4-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.944311] usb 4-3.1: Product: USB3.0 Hub [ 1.944312] usb 4-3.1: Manufacturer: VIA Labs, Inc. [ 1.946170] hub 4-3.1:1.0: USB hub found [ 1.946317] hub 4-3.1:1.0: 4 ports detected [ 2.076002] usb 3-3.1.1: new low-speed USB device number 4 using xhci_hcd [ 2.233464] usb 3-3.1.1: New USB device found, idVendor=068e, idProduct=00f1 [ 2.233465] usb 3-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.233466] usb 3-3.1.1: Product: CH PRO THROTTLE USB [ 2.233467] usb 3-3.1.1: Manufacturer: CH PRODUCTS [ 2.237892] hidraw: raw HID events driver (C) Jiri Kosina [ 2.241278] usbcore: registered new interface driver usbhid [ 2.241278] usbhid: USB HID core driver [ 2.242508] input: CH PRODUCTS CH PRO THROTTLE USB as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1:1.0/0003:068E:00F1.0001/input/input4 [ 2.242546] hid-generic 0003:068E:00F1.0001: input,hidraw0: USB HID v1.00 Joystick [CH PRODUCTS CH PRO THROTTLE USB ] on usb-0000:00:14.0-3.1.1/input0 [ 2.367952] usb 3-3.1.2: new low-speed USB device number 5 using xhci_hcd [ 2.529457] usb 3-3.1.2: New USB device found, idVendor=068e, idProduct=0501 [ 2.529458] usb 3-3.1.2: New USB device strings: Mfr=1, Product=4, SerialNumber=0 [ 2.529459] usb 3-3.1.2: Product: CH Pro Pedals USB Rudder Pedals [ 2.529459] usb 3-3.1.2: Manufacturer: CH Products [ 2.535934] input: CH Products CH Pro Pedals USB Rudder Pedals as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.0/0003:068E:0501.0002/input/input5 [ 2.535982] hid-generic 0003:068E:0501.0002: input,hidraw1: USB HID v1.00 Joystick [CH Products CH Pro Pedals USB Rudder Pedals ] on usb-0000:00:14.0-3.1.2/input0 [ 2.600034] usb 4-3.1.4: new SuperSpeed USB device number 4 using xhci_hcd [ 2.719997] clocksource: Switched to clocksource tsc [ 2.852199] usb 4-3.1.4: New USB device found, idVendor=2109, idProduct=0812 [ 2.852200] usb 4-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.852201] usb 4-3.1.4: Product: USB3.0 Hub [ 2.852202] usb 4-3.1.4: Manufacturer: VIA Labs, Inc. [ 2.853458] hub 4-3.1.4:1.0: USB hub found [ 2.853603] hub 4-3.1.4:1.0: 4 ports detected [ 2.983948] usb 3-3.1.3: new low-speed USB device number 6 using xhci_hcd [ 3.141101] usb 3-3.1.3: New USB device found, idVendor=068e, idProduct=00f3 [ 3.141102] usb 3-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.141103] usb 3-3.1.3: Product: CH FIGHTERSTICK USB [ 3.141104] usb 3-3.1.3: Manufacturer: CH PRODUCTS [ 3.145700] input: CH PRODUCTS CH FIGHTERSTICK USB as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.3/3-3.1.3:1.0/0003:068E:00F3.0003/input/input6 [ 3.145735] hid-generic 0003:068E:00F3.0003: input,hidraw2: USB HID v1.00 Joystick [CH PRODUCTS CH FIGHTERSTICK USB ] on usb-0000:00:14.0-3.1.3/input0 [ 3.235948] usb 3-3.1.4: new high-speed USB device number 7 using xhci_hcd [ 3.349414] usb 3-3.1.4: New USB device found, idVendor=2109, idProduct=2812 [ 3.349415] usb 3-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.349416] usb 3-3.1.4: Product: USB2.0 Hub [ 3.349417] usb 3-3.1.4: Manufacturer: VIA Labs, Inc. [ 3.349901] hub 3-3.1.4:1.0: USB hub found [ 3.350035] hub 3-3.1.4:1.0: 4 ports detected [ 3.428036] usb 4-3.1.4.4: new SuperSpeed USB device number 5 using xhci_hcd [ 3.680275] usb 4-3.1.4.4: New USB device found, idVendor=2109, idProduct=0812 [ 3.680276] usb 4-3.1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.680276] usb 4-3.1.4.4: Product: USB3.0 Hub [ 3.680277] usb 4-3.1.4.4: Manufacturer: VIA Labs, Inc. [ 3.681631] hub 4-3.1.4.4:1.0: USB hub found [ 3.681780] hub 4-3.1.4.4:1.0: 4 ports detected [ 3.771948] usb 3-3.1.4.1: new full-speed USB device number 8 using xhci_hcd [ 3.885460] usb 3-3.1.4.1: New USB device found, idVendor=046d, idProduct=c07e [ 3.885461] usb 3-3.1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.885462] usb 3-3.1.4.1: Product: Gaming Mouse G402 [ 3.885462] usb 3-3.1.4.1: Manufacturer: Logitech [ 3.885463] usb 3-3.1.4.1: SerialNumber: 6D8F436B5052 [ 3.886796] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.1/3-3.1.4.1:1.0/0003:046D:C07E.0004/input/input7 [ 3.886843] hid-generic 0003:046D:C07E.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3.1.4.1/input0 [ 3.887618] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.1/3-3.1.4.1:1.1/0003:046D:C07E.0005/input/input8 [ 3.943991] hid-generic 0003:046D:C07E.0005: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3.1.4.1/input1 [ 4.036002] usb 3-3.1.4.2: new high-speed USB device number 9 using xhci_hcd [ 4.149244] usb 3-3.1.4.2: New USB device found, idVendor=05e3, idProduct=0607 [ 4.149245] usb 3-3.1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.149246] usb 3-3.1.4.2: Product: USB2.0 Hub [ 4.149995] hub 3-3.1.4.2:1.0: USB hub found [ 4.150249] hub 3-3.1.4.2:1.0: 4 ports detected [ 4.228020] usb 4-3.1.4.4.4: new SuperSpeed USB device number 6 using xhci_hcd [ 4.480051] usb 4-3.1.4.4.4: New USB device found, idVendor=2109, idProduct=0812 [ 4.480052] usb 4-3.1.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.480053] usb 4-3.1.4.4.4: Product: USB3.0 Hub [ 4.480054] usb 4-3.1.4.4.4: Manufacturer: VIA Labs, Inc. [ 4.481586] hub 4-3.1.4.4.4:1.0: USB hub found [ 4.481731] hub 4-3.1.4.4.4:1.0: 4 ports detected [ 4.567999] usb 3-3.1.4.4: new high-speed USB device number 10 using xhci_hcd [ 4.681417] usb 3-3.1.4.4: New USB device found, idVendor=2109, idProduct=2812 [ 4.681418] usb 3-3.1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.681419] usb 3-3.1.4.4: Product: USB2.0 Hub [ 4.681420] usb 3-3.1.4.4: Manufacturer: VIA Labs, Inc. [ 4.682128] hub 3-3.1.4.4:1.0: USB hub found [ 4.682285] hub 3-3.1.4.4:1.0: 4 ports detected [ 4.759998] usb 3-3.1.4.2.1: new low-speed USB device number 11 using xhci_hcd [ 4.867590] usb 3-3.1.4.2.1: New USB device found, idVendor=046d, idProduct=c22b [ 4.867591] usb 3-3.1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.867592] usb 3-3.1.4.2.1: Product: G110 G-keys [ 4.867593] usb 3-3.1.4.2.1: Manufacturer: LOGITECH [ 4.873053] input: LOGITECH G110 G-keys as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.1/3-3.1.4.2.1:1.0/0003:046D:C22B.0006/input/input9 [ 4.932224] hid-generic 0003:046D:C22B.0006: input,hiddev1,hidraw5: USB HID v1.00 Keypad [LOGITECH G110 G-keys] on usb-0000:00:14.0-3.1.4.2.1/input0 [ 4.932268] usbhid 3-3.1.4.2.1:1.1: couldn't find an input interrupt endpoint [ 4.987998] usb 3-3.1.4.4.4: new high-speed USB device number 12 using xhci_hcd [ 5.101507] usb 3-3.1.4.4.4: New USB device found, idVendor=2109, idProduct=2812 [ 5.101508] usb 3-3.1.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.101509] usb 3-3.1.4.4.4: Product: USB2.0 Hub [ 5.101510] usb 3-3.1.4.4.4: Manufacturer: VIA Labs, Inc. [ 5.102366] hub 3-3.1.4.4.4:1.0: USB hub found [ 5.102475] hub 3-3.1.4.4.4:1.0: 4 ports detected [ 5.179999] usb 3-3.1.4.2.2: new full-speed USB device number 13 using xhci_hcd [ 5.282012] usb 3-3.1.4.2.2: New USB device found, idVendor=0d8c, idProduct=013c [ 5.282013] usb 3-3.1.4.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.282014] usb 3-3.1.4.2.2: Product: USB PnP Sound Device [ 5.282015] usb 3-3.1.4.2.2: Manufacturer: C-Media Electronics Inc. [ 5.283320] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.2/3-3.1.4.2.2:1.3/0003:0D8C:013C.0007/input/input10 [ 5.340173] hid-generic 0003:0D8C:013C.0007: input,hidraw6: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device ] on usb-0000:00:14.0-3.1.4.2.2/input3 [ 5.407998] usb 3-3.1.4.4.4.4: new full-speed USB device number 14 using xhci_hcd [ 5.521360] usb 3-3.1.4.4.4.4: New USB device found, idVendor=1050, idProduct=0120 [ 5.521361] usb 3-3.1.4.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.521362] usb 3-3.1.4.4.4.4: Product: Security Key by Yubico [ 5.521363] usb 3-3.1.4.4.4.4: Manufacturer: Yubico [ 5.522704] hid-generic 0003:1050:0120.0008: hiddev2,hidraw7: USB HID v1.10 Device [Yubico Security Key by Yubico] on usb-0000:00:14.0-3.1.4.4.4.4/input0 [ 5.599998] usb 3-3.1.4.2.3: new low-speed USB device number 15 using xhci_hcd [ 5.706514] usb 3-3.1.4.2.3: New USB device found, idVendor=046d, idProduct=c22a [ 5.706516] usb 3-3.1.4.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.706517] usb 3-3.1.4.2.3: Product: Gaming Keyboard G110 [ 5.710787] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.3/3-3.1.4.2.3:1.0/0003:046D:C22A.0009/input/input11 [ 5.768175] hid-generic 0003:046D:C22A.0009: input,hidraw8: USB HID v1.10 Keyboard [Gaming Keyboard G110] on usb-0000:00:14.0-3.1.4.2.3/input0 [ 5.771943] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.3/3-3.1.4.2.3:1.1/0003:046D:C22A.000A/input/input12 [ 5.832248] hid-generic 0003:046D:C22A.000A: input,hiddev3,hidraw9: USB HID v1.10 Device [Gaming Keyboard G110] on usb-0000:00:14.0-3.1.4.2.3/input1 [ 33.091391] random: crng init done [ 51.048241] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 52.271734] ip_tables: (C) 2000-2006 Netfilter Core Team [ 52.380084] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 52.400138] systemd[1]: Detected architecture x86-64. [ 52.409144] systemd[1]: Set hostname to . [ 53.927106] systemd[1]: Created slice User and Session Slice. [ 53.927218] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 53.927228] systemd[1]: Reached target User and Group Name Lookups. [ 53.927249] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 53.927255] systemd[1]: Reached target Remote File Systems. [ 53.927319] systemd[1]: Created slice System Slice. [ 53.927368] systemd[1]: Listening on Journal Socket. [ 54.430123] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro [ 54.558823] lp: driver loaded but no devices found [ 54.676406] ppdev: user-space parallel port driver [ 54.682248] systemd-journald[450]: Received request to flush runtime journal from PID 1 [ 54.762886] it87: Found IT8620E chip at 0xa30, revision 4 [ 54.762909] it87: Beeping is supported [ 56.071706] systemd-journald[450]: File /var/log/journal/8c33c5f314e945d3bfcad800a817307e/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 67.074041] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 67.150939] PKCS#7 signature not signed with a trusted key [ 67.152462] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238 [ 67.190915] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 67.190917] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 67.190917] RAPL PMU: hw unit of domain package 2^-14 Joules [ 67.190918] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 67.190918] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 67.195681] AVX2 version of gcm_enc/dec engaged. [ 67.195681] AES CTR mode by8 optimization enabled [ 67.220190] intel_rapl: Found RAPL domain package [ 67.220191] intel_rapl: Found RAPL domain core [ 67.220192] intel_rapl: Found RAPL domain uncore [ 67.220192] intel_rapl: Found RAPL domain dram [ 67.507558] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 67.507564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 67.507566] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 67.507569] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 67.507570] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 67.507573] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 67.507576] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 67.507577] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 67.507580] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 67.507583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 67.507583] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 67.670084] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 67.670206] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 67.890222] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 67.890371] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 67.890402] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 67.890645] snd_hda_intel 0000:01:00.1: Disabling MSI [ 67.890650] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 67.934004] usbcore: registered new interface driver snd-usb-audio [ 67.974661] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 67.974703] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 67.974738] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 67.974770] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 67.974814] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 67.976063] snd_hda_codec_realtek hdaudioC1D2: ALC1150: SKU not ready 0x00000000 [ 67.976560] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 67.976561] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 67.976562] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 67.976562] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 67.976563] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x1e [ 67.976564] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 67.976565] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 67.976565] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 67.976566] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 67.987716] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 67.987754] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 67.987789] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 67.987826] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 67.987860] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22 [ 67.987894] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 67.987933] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24 [ 68.254375] NVRM: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics driver requires the use of a text-mode VGA console. Use of other console drivers including, but not limited to, vesafb, may result in corruption and stability problems, and is not supported. [ 68.664178] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25 [ 68.664218] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input26 [ 68.664253] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input27 [ 68.664287] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input28 [ 69.793970] audit: type=1400 audit(1525675717.499:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=1050 comm="apparmor_parser" [ 69.793993] audit: type=1400 audit(1525675717.499:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=1049 comm="apparmor_parser" [ 69.794603] audit: type=1400 audit(1525675717.499:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=1054 comm="apparmor_parser" [ 69.794637] audit: type=1400 audit(1525675717.499:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=1058 comm="apparmor_parser" [ 69.795219] audit: type=1400 audit(1525675717.499:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=1059 comm="apparmor_parser" [ 69.795591] audit: type=1400 audit(1525675717.499:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1051 comm="apparmor_parser" [ 69.795593] audit: type=1400 audit(1525675717.499:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1051 comm="apparmor_parser" [ 69.796069] audit: type=1400 audit(1525675717.503:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="udm-extractor" pid=1066 comm="apparmor_parser" [ 69.796681] audit: type=1400 audit(1525675717.503:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1067 comm="apparmor_parser" [ 69.797420] audit: type=1400 audit(1525675717.503:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1069 comm="apparmor_parser" [ 70.232051] Adding 16599548k swap on /dev/mapper/cryptswap1. Priority:-2 extents:1 across:16599548k FS [ 76.305848] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 76.492130] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 76.494683] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 76.495471] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 78.235305] show_signal_msg: 30 callbacks suppressed [ 78.235307] gnome-shell[1437]: segfault at 20 ip 00007f220814855d sp 00007ffd8f6b8010 error 4 in libmutter-2.so.0.0.0[7f220805a000+156000] [ 79.052915] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 79.053030] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 79.221982] nvidia-modeset: Allocated GPU:0 (GPU-d848ec08-aa2b-b0a4-935c-5a54c12dc534) @ PCI:0000:01:00.0 [ 79.606020] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 79.606053] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 91.611747] systemd-journald[450]: File /var/log/journal/8c33c5f314e945d3bfcad800a817307e/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 91.834710] Could not find key with description: [222d8c0397b5651c] [ 91.834713] process_request_key_err: No key [ 91.834713] Could not find valid key in user session keyring for sig specified in mount option: [222d8c0397b5651c] [ 91.834714] One or more global auth toks could not properly register; rc = [-2] [ 91.834715] Error parsing options; rc = [-2] [ 98.652402] rfkill: input handler disabled [26834.826662] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [32825.594053] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4] [32825.594056] ecryptfs_readpage: Error decrypting page; rc = [-4] [33084.362452] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4] [33084.362455] ecryptfs_readpage: Error decrypting page; rc = [-4] [38196.256962] perf: interrupt took too long (3134 > 3132), lowering kernel.perf_event_max_sample_rate to 63750 [41216.808659] rsync[11261]: segfault at 7ffdf3f55000 ip 00007f096bce8423 sp 00007ffdf3f4dba0 error 4 in libc-2.27.so[7f096bcc0000+1e7000] [41233.471936] rsync[11688]: segfault at 7ffe13878000 ip 00007fd933240423 sp 00007ffe1386fd90 error 4 in libc-2.27.so[7fd933218000+1e7000] [41716.172183] rsync[29821]: segfault at 7ffd4b36f000 ip 00007f7b8fe7a423 sp 00007ffd4b368b60 error 4 in libc-2.27.so[7f7b8fe52000+1e7000] [41816.419375] rsync[3706]: segfault at 7ffd2f413000 ip 00007f3c30472423 sp 00007ffd2f40c310 error 4 in libc-2.27.so[7f3c3044a000+1e7000] [42485.384203] rsync[11999]: segfault at 7ffec8f2d000 ip 00007fb3cb365423 sp 00007ffec8f25e30 error 4 in libc-2.27.so[7fb3cb33d000+1e7000] [42521.548769] rsync[12587]: segfault at 7fff55c7c000 ip 00007fb6ec420423 sp 00007fff55c74160 error 4 in libc-2.27.so[7fb6ec3f8000+1e7000] [42585.891608] rsync[14121]: segfault at 7fffa3761000 ip 00007fb47a97f423 sp 00007fffa3759f80 error 4 in libc-2.27.so[7fb47a957000+1e7000] [44755.261462] rsync[7396]: segfault at 7ffc6d60b000 ip 00007f68d066e423 sp 00007ffc6d6040a0 error 4 in libc-2.27.so[7f68d0646000+1e7000] [45283.886423] rsync[13661]: segfault at 7ffec6780000 ip 00007f3389452423 sp 00007ffec67799c0 error 4 in libc-2.27.so[7f338942a000+1e7000] [45360.561822] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4] [45360.561826] ecryptfs_readpage: Error decrypting page; rc = [-4] [47378.945494] rsync[3686]: segfault at 7ffedc9fd000 ip 00007f276e4d3423 sp 00007ffedc9f5550 error 4 in libc-2.27.so[7f276e4ab000+1e7000] [53188.084254] audit: type=1400 audit(1525728835.608:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine" pid=863 comm="apparmor_parser" [53188.084360] audit: type=1400 audit(1525728835.608:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=863 comm="apparmor_parser" [53188.350244] audit: type=1400 audit(1525728835.876:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=877 comm="apparmor_parser" [53188.544346] audit: type=1400 audit(1525728836.068:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=880 comm="apparmor_parser" [53189.253503] audit: type=1400 audit(1525728836.780:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-clocks" pid=911 comm="apparmor_parser" [53189.327646] audit: type=1400 audit(1525728836.852:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-clocks.gnome-clocks" pid=914 comm="apparmor_parser" [53190.553237] audit: type=1400 audit(1525728838.080:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine" pid=974 comm="apparmor_parser" [53190.597079] audit: type=1400 audit(1525728838.124:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4571/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=974 comm="apparmor_parser" [53190.603385] audit: type=1400 audit(1525728838.128:50): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=976 comm="apparmor_parser" [53190.605544] audit: type=1400 audit(1525728838.132:51): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=980 comm="apparmor_parser" [58185.694757] PM: suspend entry (deep) [58185.694759] PM: Syncing filesystems ... done. [58186.995925] Freezing user space processes ... (elapsed 0.636 seconds) done. [58187.632058] OOM killer disabled. [58187.632060] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [58187.634088] Suspending console(s) (use no_console_suspend to debug) [58187.636107] serial 00:05: disabled [58187.637944] e1000e: EEE TX LPI TIMER: 00000011 [58187.666348] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [58187.670535] sd 2:0:0:0: [sda] Synchronizing SCSI cache [58187.670598] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [58187.670721] sd 2:0:0:0: [sda] Stopping disk [58187.670815] sd 3:0:0:0: [sdb] Stopping disk [58187.694630] sd 6:0:0:0: [sdc] Stopping disk [58188.554313] ACPI: Preparing to enter system sleep state S3 [58188.554673] PM: Saving platform NVS memory [58188.554687] Disabling non-boot CPUs ... [58188.571603] smpboot: CPU 1 is now offline [58188.598701] IRQ 39: no longer affine to CPU2 [58188.599719] smpboot: CPU 2 is now offline [58188.619826] smpboot: CPU 3 is now offline [58188.647910] smpboot: CPU 4 is now offline [58188.670913] IRQ 28: no longer affine to CPU5 [58188.671950] smpboot: CPU 5 is now offline [58188.694938] IRQ 16: no longer affine to CPU6 [58188.694945] IRQ 23: no longer affine to CPU6 [58188.695997] smpboot: CPU 6 is now offline [58188.718996] IRQ 27: no longer affine to CPU7 [58188.720036] smpboot: CPU 7 is now offline [58188.722686] ACPI: Low-level resume complete [58188.722734] PM: Restoring platform NVS memory [58188.724749] Enabling non-boot CPUs ... [58188.724815] x86: Booting SMP configuration: [58188.724816] smpboot: Booting Node 0 Processor 1 APIC 0x2 [58188.726266] cache: parent cpu1 should not be sleeping [58188.726417] CPU1 is up [58188.726440] smpboot: Booting Node 0 Processor 2 APIC 0x4 [58188.727892] cache: parent cpu2 should not be sleeping [58188.728054] CPU2 is up [58188.728076] smpboot: Booting Node 0 Processor 3 APIC 0x6 [58188.729524] cache: parent cpu3 should not be sleeping [58188.729698] CPU3 is up [58188.729720] smpboot: Booting Node 0 Processor 4 APIC 0x1 [58188.730147] cache: parent cpu4 should not be sleeping [58188.730291] CPU4 is up [58188.730317] smpboot: Booting Node 0 Processor 5 APIC 0x3 [58188.730686] cache: parent cpu5 should not be sleeping [58188.730838] CPU5 is up [58188.730857] smpboot: Booting Node 0 Processor 6 APIC 0x5 [58188.731225] cache: parent cpu6 should not be sleeping [58188.731384] CPU6 is up [58188.731404] smpboot: Booting Node 0 Processor 7 APIC 0x7 [58188.731770] cache: parent cpu7 should not be sleeping [58188.731942] CPU7 is up [58188.737228] ACPI: Waking up from system sleep state S3 [58188.779734] serial 00:05: activated [58188.781606] sd 2:0:0:0: [sda] Starting disk [58188.781609] sd 3:0:0:0: [sdb] Starting disk [58188.781629] sd 6:0:0:0: [sdc] Starting disk [58188.949886] usb 3-3.1.4-port4: cannot disable (err = -71) [58188.976678] hub 3-3.1.4:1.0: hub_ext_port_status failed (err = -71) [58188.996681] usb 3-3.1.4-port1: cannot disable (err = -71) [58189.091457] ata8: SATA link down (SStatus 0 SControl 300) [58189.146094] OOM killer enabled. [58189.146095] Restarting tasks ... [58189.146218] pci_bus 0000:05: Allocating resources [58189.146234] pci 0000:04:00.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [58189.146237] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [58189.146238] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000 [58189.146241] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000] [58189.146242] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000] [58189.146244] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [58189.146244] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [58189.146246] pci 0000:04:00.0: BAR 13: no space for [io size 0x1000] [58189.146246] pci 0000:04:00.0: BAR 13: failed to assign [io size 0x1000] [58189.146248] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000] [58189.146249] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000] [58189.146250] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [58189.146251] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [58189.146252] pci 0000:04:00.0: BAR 13: no space for [io size 0x1000] [58189.146253] pci 0000:04:00.0: BAR 13: failed to assign [io size 0x1000] [58189.146254] pci 0000:04:00.0: PCI bridge to [bus 05] [58189.148835] hub 3-3.1.4:1.0: hub_ext_port_status failed (err = -71) [58189.148911] hub 3-3.1.4:1.0: hub_ext_port_status failed (err = -71) [58189.148991] hub 3-3.1.4:1.0: hub_ext_port_status failed (err = -71) [58189.149071] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58189.151805] done. [58189.152193] video LNXVIDEO:00: Restoring backlight state [58189.152330] PM: suspend exit [58189.162027] Read-error on swap-device (253:0:361608) [58189.167038] Read-error on swap-device (253:0:361672) [58189.962143] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962219] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962299] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962359] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962437] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962439] usb 3-3.1.4.2-port1: Cannot enable. Maybe the USB cable is bad? [58189.962517] usb 3-3.1.4.2-port1: cannot disable (err = -71) [58189.962597] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962678] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962757] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962838] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962917] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.962919] usb 3-3.1.4.2-port1: Cannot enable. Maybe the USB cable is bad? [58189.962997] usb 3-3.1.4.2-port1: cannot disable (err = -71) [58189.963077] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963157] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963237] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963317] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963397] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963399] usb 3-3.1.4.2-port1: Cannot enable. Maybe the USB cable is bad? [58189.963477] usb 3-3.1.4.2-port1: cannot disable (err = -71) [58189.963557] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963637] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963717] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963797] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963877] usb 3-3.1.4.2-port1: cannot reset (err = -71) [58189.963879] usb 3-3.1.4.2-port1: Cannot enable. Maybe the USB cable is bad? [58189.963957] usb 3-3.1.4.2-port1: cannot disable (err = -71) [58189.964037] usb 3-3.1.4.2-port1: cannot disable (err = -71) [58189.964119] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58189.964198] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58189.978156] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978218] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978290] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978370] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978426] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978428] usb 3-3.1.4.2-port3: Cannot enable. Maybe the USB cable is bad? [58189.978505] usb 3-3.1.4.2-port3: cannot disable (err = -71) [58189.978586] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978665] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978745] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978825] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978905] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.978907] usb 3-3.1.4.2-port3: Cannot enable. Maybe the USB cable is bad? [58189.978986] usb 3-3.1.4.2-port3: cannot disable (err = -71) [58189.979065] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979145] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979225] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979305] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979385] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979387] usb 3-3.1.4.2-port3: Cannot enable. Maybe the USB cable is bad? [58189.979465] usb 3-3.1.4.2-port3: cannot disable (err = -71) [58189.979545] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979625] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979705] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979785] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979865] usb 3-3.1.4.2-port3: cannot reset (err = -71) [58189.979867] usb 3-3.1.4.2-port3: Cannot enable. Maybe the USB cable is bad? [58189.979945] usb 3-3.1.4.2-port3: cannot disable (err = -71) [58189.980025] usb 3-3.1.4.2-port3: cannot disable (err = -71) [58189.980159] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58189.980238] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58190.038673] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.038725] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.038788] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.038866] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.038946] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.038948] usb 3-3.1.4.2-port2: Cannot enable. Maybe the USB cable is bad? [58190.039026] usb 3-3.1.4.2-port2: cannot disable (err = -71) [58190.039106] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039186] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039266] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039346] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039430] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039432] usb 3-3.1.4.2-port2: Cannot enable. Maybe the USB cable is bad? [58190.039466] usb 3-3.1.4.2-port2: cannot disable (err = -71) [58190.039546] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039626] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039707] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039786] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039866] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.039868] usb 3-3.1.4.2-port2: Cannot enable. Maybe the USB cable is bad? [58190.039945] usb 3-3.1.4.2-port2: cannot disable (err = -71) [58190.040026] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.040106] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.040186] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.040266] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.040346] usb 3-3.1.4.2-port2: cannot reset (err = -71) [58190.040348] usb 3-3.1.4.2-port2: Cannot enable. Maybe the USB cable is bad? [58190.040426] usb 3-3.1.4.2-port2: cannot disable (err = -71) [58190.040506] usb 3-3.1.4.2-port2: cannot disable (err = -71) [58190.040602] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58190.040667] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58190.040746] hub 3-3.1.4.2:1.0: hub_ext_port_status failed (err = -71) [58190.233913] usb 3-3.1.4.2.2: 1:1: cannot set freq 48000 to ep 0x1 [58190.235031] usb 3-3.1.4.2.2: 2:1: cannot set freq 48000 to ep 0x82 [58190.235050] usb 3-3.1.4.2.2: 9:0: cannot get min/max values for control 2 (id 9) [58190.235056] usb 3-3.1.4.2.2: 10:0: cannot get min/max values for control 2 (id 10) [58192.522766] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [58194.144666] ata3: link is slow to respond, please be patient (ready=0) [58194.148656] ata4: link is slow to respond, please be patient (ready=0) [58196.457998] usb 3-3.1.4.1: USB disconnect, device number 8 [58196.458131] usb 3-3.1.4.2.1: USB disconnect, device number 11 [58196.459256] usb 3-3.1.4.2.2: USB disconnect, device number 13 [58196.460854] usb 3-3.1.4.2.3: USB disconnect, device number 15 [58196.461903] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.461977] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462056] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462136] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462216] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462219] usb 3-3.1.4-port2: Cannot enable. Maybe the USB cable is bad? [58196.462296] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462376] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462456] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462536] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462616] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462619] usb 3-3.1.4-port2: Cannot enable. Maybe the USB cable is bad? [58196.462696] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462776] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462856] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.462936] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.463016] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.463019] usb 3-3.1.4-port2: Cannot enable. Maybe the USB cable is bad? [58196.463096] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.463176] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.463256] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.463336] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.463418] usb 3-3.1.4-port2: cannot reset (err = -71) [58196.463423] usb 3-3.1.4-port2: Cannot enable. Maybe the USB cable is bad? [58196.594309] usb 3-3.1.4.2: USB disconnect, device number 9 [58196.595289] usb 3-3.1.4.4: USB disconnect, device number 10 [58196.595296] usb 3-3.1.4.4.4: USB disconnect, device number 12 [58196.595301] usb 3-3.1.4.4.4.4: USB disconnect, device number 14 [58196.689010] usb 3-3.1.4: reset high-speed USB device number 7 using xhci_hcd [58196.732765] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [58196.735614] ata4.00: configured for UDMA/133 [58196.800776] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [58196.803169] ata3.00: configured for UDMA/133 [58197.116789] usb 3-3.1.4.1: new full-speed USB device number 16 using xhci_hcd [58197.230476] usb 3-3.1.4.1: New USB device found, idVendor=046d, idProduct=c07e [58197.230480] usb 3-3.1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [58197.230483] usb 3-3.1.4.1: Product: Gaming Mouse G402 [58197.230486] usb 3-3.1.4.1: Manufacturer: Logitech [58197.230488] usb 3-3.1.4.1: SerialNumber: 6D8F436B5052 [58197.232632] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.1/3-3.1.4.1:1.0/0003:046D:C07E.000B/input/input29 [58197.232997] hid-generic 0003:046D:C07E.000B: input,hidraw3: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3.1.4.1/input0 [58197.234409] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.1/3-3.1.4.1:1.1/0003:046D:C07E.000C/input/input30 [58197.293359] hid-generic 0003:046D:C07E.000C: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3.1.4.1/input1 [58197.384762] usb 3-3.1.4.2: new high-speed USB device number 17 using xhci_hcd [58197.498125] usb 3-3.1.4.2: New USB device found, idVendor=05e3, idProduct=0607 [58197.498130] usb 3-3.1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [58197.498134] usb 3-3.1.4.2: Product: USB2.0 Hub [58197.499108] hub 3-3.1.4.2:1.0: USB hub found [58197.499375] hub 3-3.1.4.2:1.0: 4 ports detected [58197.592810] usb 3-3.1.4.4: new high-speed USB device number 18 using xhci_hcd [58197.706497] usb 3-3.1.4.4: New USB device found, idVendor=2109, idProduct=2812 [58197.706502] usb 3-3.1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [58197.706505] usb 3-3.1.4.4: Product: USB2.0 Hub [58197.706508] usb 3-3.1.4.4: Manufacturer: VIA Labs, Inc. [58197.707532] hub 3-3.1.4.4:1.0: USB hub found [58197.707838] hub 3-3.1.4.4:1.0: 4 ports detected [58197.788821] usb 3-3.1.4.2.1: new low-speed USB device number 19 using xhci_hcd [58197.896629] usb 3-3.1.4.2.1: New USB device found, idVendor=046d, idProduct=c22b [58197.896635] usb 3-3.1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [58197.896639] usb 3-3.1.4.2.1: Product: G110 G-keys [58197.896642] usb 3-3.1.4.2.1: Manufacturer: LOGITECH [58197.903115] input: LOGITECH G110 G-keys as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.1/3-3.1.4.2.1:1.0/0003:046D:C22B.000D/input/input31 [58197.961019] hid-generic 0003:046D:C22B.000D: input,hiddev1,hidraw5: USB HID v1.00 Keypad [LOGITECH G110 G-keys] on usb-0000:00:14.0-3.1.4.2.1/input0 [58197.961070] usbhid 3-3.1.4.2.1:1.1: couldn't find an input interrupt endpoint [58198.012747] usb 3-3.1.4.4.4: new high-speed USB device number 20 using xhci_hcd [58198.126681] usb 3-3.1.4.4.4: New USB device found, idVendor=2109, idProduct=2812 [58198.126685] usb 3-3.1.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [58198.126688] usb 3-3.1.4.4.4: Product: USB2.0 Hub [58198.126690] usb 3-3.1.4.4.4: Manufacturer: VIA Labs, Inc. [58198.127676] hub 3-3.1.4.4.4:1.0: USB hub found [58198.128021] hub 3-3.1.4.4.4:1.0: 4 ports detected [58198.204812] usb 3-3.1.4.2.2: new full-speed USB device number 21 using xhci_hcd [58198.307104] usb 3-3.1.4.2.2: New USB device found, idVendor=0d8c, idProduct=013c [58198.307110] usb 3-3.1.4.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [58198.307114] usb 3-3.1.4.2.2: Product: USB PnP Sound Device [58198.307117] usb 3-3.1.4.2.2: Manufacturer: C-Media Electronics Inc. [58198.317531] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.2/3-3.1.4.2.2:1.3/0003:0D8C:013C.000E/input/input32 [58198.377219] hid-generic 0003:0D8C:013C.000E: input,hidraw6: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device ] on usb-0000:00:14.0-3.1.4.2.2/input3 [58198.432836] usb 3-3.1.4.4.4.4: new full-speed USB device number 22 using xhci_hcd [58198.546486] usb 3-3.1.4.4.4.4: New USB device found, idVendor=1050, idProduct=0120 [58198.546492] usb 3-3.1.4.4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [58198.546497] usb 3-3.1.4.4.4.4: Product: Security Key by Yubico [58198.546500] usb 3-3.1.4.4.4.4: Manufacturer: Yubico [58198.548555] hid-generic 0003:1050:0120.000F: hiddev2,hidraw7: USB HID v1.10 Device [Yubico Security Key by Yubico] on usb-0000:00:14.0-3.1.4.4.4.4/input0 [58198.624822] usb 3-3.1.4.2.3: new low-speed USB device number 23 using xhci_hcd [58198.731528] usb 3-3.1.4.2.3: New USB device found, idVendor=046d, idProduct=c22a [58198.731534] usb 3-3.1.4.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [58198.731539] usb 3-3.1.4.2.3: Product: Gaming Keyboard G110 [58198.736558] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.3/3-3.1.4.2.3:1.0/0003:046D:C22A.0010/input/input33 [58198.793576] hid-generic 0003:046D:C22A.0010: input,hidraw8: USB HID v1.10 Keyboard [Gaming Keyboard G110] on usb-0000:00:14.0-3.1.4.2.3/input0 [58198.797990] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.4/3-3.1.4.2/3-3.1.4.2.3/3-3.1.4.2.3:1.1/0003:046D:C22A.0011/input/input34 [58198.808788] ata7: softreset failed (device not ready) [58198.857386] hid-generic 0003:046D:C22A.0011: input,hiddev3,hidraw9: USB HID v1.10 Device [Gaming Keyboard G110] on usb-0000:00:14.0-3.1.4.2.3/input1 [58202.580899] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [58202.587780] ata7.00: configured for UDMA/133 [58204.312377] rfkill: input handler enabled [58204.321137] rfkill: input handler disabled [58206.900140] e1000e: eno1 NIC Link is Down [58206.900875] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [58207.085050] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [58207.086225] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [58207.087127] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [58210.486958] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [58210.486987] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [58226.226943] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4] [58226.226947] ecryptfs_readpage: Error decrypting page; rc = [-4] [58229.747424] rfkill: input handler enabled [58660.523781] rfkill: input handler disabled [58680.157426] perf: interrupt took too long (3930 > 3917), lowering kernel.perf_event_max_sample_rate to 50750