parse-edid: parse-edid version 1.4.1
get-edid: get-edid version 1.4.1

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
        Function supported
        Call successful

        VBE version 200
        VBE string at 0x11110 "ATI RV200"

VBE/DDC service about to be called
        Report DDC capabilities

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
        Function supported
        Call successful

        Monitor and video card combination does not support DDC1 transfers
        Monitor and video card combination supports DDC2 transfers
        0 seconds per 128 byte EDID block transfer
        Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
        Read EDID

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
        Function supported
        Call failed

The EDID data should not be trusted as the VBE call failed
parse-edid: EDID checksum failed - data is corrupt. Continuing anyway.
parse-edid: first bytes don't match EDID version 1 header
parse-edid: do not trust output (if any).

        # EDID version 1 revision 2
Section "Monitor"
        # Block type: 2:0 3:fd
        # Block type: 2:0 3:fc
        Identifier "SONY CPD-E400"
        VendorName "SNY"
        ModelName "SONY CPD-E400"
        # Block type: 2:0 3:fd
        HorizSync 30-96
        VertRefresh 48-120
        # Max dot clock (video bandwidth) 300 MHz
        # Block type: 2:0 3:fc
        # Block type: 2:0 3:ff
        # DPMS capabilities: Active off:yes  Suspend:yes  Standby:yes

        Mode    "1280x1024"     # vfreq 85.024Hz, hfreq 91.146kHz
                DotClock        157.500000
                HTimings        1280 1344 1504 1728
                VTimings        1024 1025 1028 1072
                Flags   "+HSync" "+VSync"
        EndMode
        # Block type: 2:0 3:fd
        # Block type: 2:0 3:fc
        # Block type: 2:0 3:ff
EndSection