[   13.237376] usb 2-1.6: USB disconnect, device number 4
[   13.844054] init: plymouth-stop pre-start process (1446) terminated with status 1
[   14.030368] bbswitch: version 0.7
[   14.030377] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   14.030382] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   14.030392] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[   14.030504] bbswitch: detected an Optimus _DSM function
[   14.030581] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   14.034004] bbswitch: disabling discrete graphics
[   14.034030] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[   16.501234] wlan0: authenticate with 50:46:5d:6d:58:cc
[   16.505854] wlan0: send auth to 50:46:5d:6d:58:cc (try 1/3)
[   16.531958] wlan0: authenticated
[   16.532702] wlan0: associate with 50:46:5d:6d:58:cc (try 1/3)
[   16.533399] wlan0: RX AssocResp from 50:46:5d:6d:58:cc (capab=0x11 status=0 aid=1)
[   16.535267] wlan0: associated
[   16.535289] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.542407] wlan0: deauthenticating from 50:46:5d:6d:58:cc by local choice (reason=3)
[   53.548977] cfg80211: Calling CRDA to update world regulatory domain
[   53.553403] cfg80211: World regulatory domain updated:
[   53.553408] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   53.553412] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   53.553415] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   53.553418] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   53.553420] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   53.553423] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   55.968330] xhci_hcd 0000:00:14.0: setting latency timer to 64
[   55.980373] ehci-pci 0000:00:1a.0: setting latency timer to 64
[   55.993377] ehci-pci 0000:00:1d.0: setting latency timer to 64
[   56.928820] bbswitch: enabling discrete graphics
[   58.201324] Syncing filesystems ... done.
[   58.335841] Freezing user space processes ... (elapsed 0.072 seconds) done.
[   58.409576] PM: Preallocating image memory... done (allocated 400588 pages)
[   58.544045] PM: Allocated 1602352 kbytes in 0.13 seconds (12325.78 MB/s)
[   58.544046] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   58.545347] Suspending console(s) (use no_console_suspend to debug)
[   58.545581] mei_me 0000:00:16.0: suspend
[   59.723126] PM: freeze of devices complete after 1176.773 msecs
[   59.723210] PM: late freeze of devices complete after 0.082 msecs
[   59.723670] PM: noirq freeze of devices complete after 0.458 msecs
[   59.723922] ACPI: Preparing to enter system sleep state S4
[   59.764381] PM: Saving platform NVS memory
[   59.770717] Disabling non-boot CPUs ...
[   59.771927] smpboot: CPU 1 is now offline
[   59.773354] smpboot: CPU 2 is now offline
[   59.774740] smpboot: CPU 3 is now offline
[   59.775066] PM: Creating hibernation image:
[   59.836239] PM: Need to copy 399533 pages
[   60.221687] PM: Hibernation image created (399533 pages copied)
[   59.776040] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19
[   59.776041] Enabling non-boot CPUs ...
[   59.776104] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   59.789628] Intel pstate controlling: cpu 1
[   59.789660] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19
[   59.789666] CPU1 is up
[   59.789680] smpboot: Booting Node 0 Processor 2 APIC 0x1
[   59.803241] Intel pstate controlling: cpu 2
[   59.803270] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x19
[   59.803278] CPU2 is up
[   59.803291] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   59.816844] Intel pstate controlling: cpu 3
[   59.816873] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19
[   59.816880] CPU3 is up
[   59.821457] ACPI: Waking up from system sleep state S4
[   59.893914] PM: noirq thaw of devices complete after 0.080 msecs
[   59.894006] PM: early thaw of devices complete after 0.071 msecs
[   59.894054] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[   59.894159] ahci 0000:00:1f.2: setting latency timer to 64
[   59.904764] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   60.354002] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   60.354314] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   60.354542] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   60.354544] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   60.355229] ata2.00: configured for UDMA/133
[   60.356009] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   60.356700] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   60.356833] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   60.356834] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   60.358574] ata1.00: configured for UDMA/133
[   60.895484] PM: thaw of devices complete after 1000.624 msecs
[   61.764225] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[   68.952377] Suspending console(s) (use no_console_suspend to debug)
[   68.952581] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   68.952613] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   68.952709] sd 1:0:0:0: [sdb] Stopping disk
[   68.952723] sd 0:0:0:0: [sda] Stopping disk
[   68.964714] mei_me 0000:00:16.0: suspend
[   70.108326] PM: suspend of devices complete after 1154.867 msecs
[   70.108413] PM: late suspend of devices complete after 0.086 msecs
[   70.119451] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[   70.130455] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[   70.152355] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[   70.163381] PM: noirq suspend of devices complete after 54.919 msecs
[   70.163634] ACPI: Preparing to enter system sleep state S3
[   70.243610] PM: Saving platform NVS memory
[   70.249930] Disabling non-boot CPUs ...
[   70.251396] smpboot: CPU 1 is now offline
[   70.252957] smpboot: CPU 2 is now offline
[   70.254233] smpboot: CPU 3 is now offline
[   70.255770] ACPI: Low-level resume complete
[   70.255827] PM: Restoring platform NVS memory
[   70.257794] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19
[   70.257827] Enabling non-boot CPUs ...
[   70.257875] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   70.271712] Intel pstate controlling: cpu 1
[   70.271777] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   70.272610] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
[   70.272621] CPU1 is up
[   70.272643] smpboot: Booting Node 0 Processor 2 APIC 0x1
[   70.286571] Intel pstate controlling: cpu 2
[   70.286611] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   70.287085] microcode: CPU2 updated to revision 0x19, date = 2013-06-13
[   70.287098] CPU2 is up
[   70.287119] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   70.300931] Intel pstate controlling: cpu 3
[   70.300970] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19
[   70.300978] CPU3 is up
[   70.307807] ACPI: Waking up from system sleep state S3
[   70.348952] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[   70.370963] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[   70.392981] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[   70.415153] PM: noirq resume of devices complete after 87.885 msecs
[   70.415272] PM: early resume of devices complete after 0.094 msecs
[   70.415303] i915 0000:00:02.0: setting latency timer to 64
[   70.415313] xhci_hcd 0000:00:14.0: setting latency timer to 64
[   70.415355] usb usb3: root hub lost power or was reset
[   70.415357] usb usb4: root hub lost power or was reset
[   70.415550] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[   70.415669] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[   70.415801] ahci 0000:00:1f.2: setting latency timer to 64
[   70.415860] ehci-pci 0000:00:1a.0: setting latency timer to 64
[   70.415870] usb usb1: root hub lost power or was reset
[   70.416020] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   70.416068] ehci-pci 0000:00:1d.0: setting latency timer to 64
[   70.416081] usb usb2: root hub lost power or was reset
[   70.419779] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[   70.419990] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[   70.734220] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[   70.877337] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   70.879025] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   70.879255] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   70.879257] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   70.879942] ata2.00: configured for UDMA/133
[   70.890367] sd 1:0:0:0: [sdb] Starting disk
[   70.950407] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[   71.137685] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[   71.341852] usb 2-1.5: reset high-speed USB device number 3 using ehci-pci
[   71.784116] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[   72.612814] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   72.613575] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   72.613716] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   72.613718] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   72.615635] ata1.00: configured for UDMA/133
[   72.625851] sd 0:0:0:0: [sda] Starting disk
[   72.647610] PM: resume of devices complete after 2230.437 msecs
[   72.721384] Restarting kernel threads ... done.
[   72.721540] Restarting tasks ... done.
[   72.736405] video LNXVIDEO:00: Restoring backlight state
[   72.736695] video LNXVIDEO:01: Restoring backlight state
[   72.736989] bbswitch: disabling discrete graphics
[   72.736995] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[   72.787076] usb 2-1.6: new full-speed USB device number 5 using ehci-pci
[   72.876410] usb 2-1.6: New USB device found, idVendor=8087, idProduct=07da
[   72.876415] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   80.638751] init: lightdm main process (1138) terminated with status 1
[   95.535515] init: network-manager main process ended, respawning
[   96.122197] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[   96.128953] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[   96.209174] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   99.499663] mei_me 0000:00:16.0: reset: init clients timeout hbm_state = 1.
[   99.499751] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
[  102.797062] wlan0: authenticate with 50:46:5d:6d:58:c8
[  102.800879] wlan0: send auth to 50:46:5d:6d:58:c8 (try 1/3)
[  102.803611] wlan0: authenticated
[  102.804471] wlan0: associate with 50:46:5d:6d:58:c8 (try 1/3)
[  102.807833] wlan0: RX AssocResp from 50:46:5d:6d:58:c8 (capab=0x411 status=0 aid=3)
[  102.809676] wlan0: associated
[  102.809704] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready