[ 40.170570] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.170834] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.172367] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 40.179414] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 40.421998] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 40.428552] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 40.544851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.545455] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.940595] vboxdrv: Found 4 processor cores. [ 40.940796] vboxdrv: fAsync=0 offMin=0x504 offMax=0x157b [ 40.940854] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 40.940856] vboxdrv: Successfully loaded version 4.1.18_Ubuntu (interface 0x00190000). [ 41.038685] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 41.042040] vboxpci: IOMMU not found (not registered) [ 41.386656] init: plymouth-stop pre-start process (1667) terminated with status 1 [ 51.248907] wlan0: authenticate with 98:4b:e1:2b:f4:b3 [ 51.327708] wlan0: send auth to 98:4b:e1:2b:f4:b3 (try 1/3) [ 51.530363] wlan0: send auth to 98:4b:e1:2b:f4:b3 (try 2/3) [ 51.532418] wlan0: authenticated [ 51.532574] wlan0: waiting for beacon from 98:4b:e1:2b:f4:b3 [ 51.634330] wlan0: associate with 98:4b:e1:2b:f4:b3 (try 1/3) [ 51.636743] wlan0: RX AssocResp from 98:4b:e1:2b:f4:b3 (capab=0x431 status=0 aid=1) [ 51.639137] wlan0: associated [ 51.639772] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 53.789021] wlan0: disassociating from 98:4b:e1:2b:f4:b3 by local choice (reason=3) [ 53.820379] cfg80211: All devices are disconnected, going to restore regulatory settings [ 53.820384] cfg80211: Restoring regulatory settings [ 53.820894] cfg80211: Calling CRDA to update world regulatory domain [ 53.821067] wlan0: deauthenticating from 98:4b:e1:2b:f4:b3 by local choice (reason=3) [ 53.823512] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 53.823515] cfg80211: World regulatory domain updated: [ 53.823517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 53.823519] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 53.823521] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 53.823523] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 53.823524] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 53.823526] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 57.954151] wlan0: authenticate with 00:0f:61:1a:12:83 [ 58.008555] wlan0: send auth to 00:0f:61:1a:12:83 (try 1/3) [ 58.212240] wlan0: send auth to 00:0f:61:1a:12:83 (try 2/3) [ 58.416178] wlan0: send auth to 00:0f:61:1a:12:83 (try 3/3) [ 58.620140] wlan0: authentication with 00:0f:61:1a:12:83 timed out [ 58.812501] wlan0: authenticate with 98:4b:e1:2b:0a:53 [ 58.823165] wlan0: send auth to 98:4b:e1:2b:0a:53 (try 1/3) [ 59.024017] wlan0: send auth to 98:4b:e1:2b:0a:53 (try 2/3) [ 59.025800] wlan0: authenticated [ 59.028103] wlan0: associate with 98:4b:e1:2b:0a:53 (try 1/3) [ 59.031985] wlan0: RX AssocResp from 98:4b:e1:2b:0a:53 (capab=0x431 status=0 aid=1) [ 59.039066] wlan0: associated [ 61.913257] wlan0: disassociating from 98:4b:e1:2b:0a:53 by local choice (reason=3) [ 61.921134] cfg80211: All devices are disconnected, going to restore regulatory settings [ 61.921139] cfg80211: Restoring regulatory settings [ 61.921142] cfg80211: Calling CRDA to update world regulatory domain [ 61.921740] wlan0: deauthenticating from 98:4b:e1:2b:0a:53 by local choice (reason=3) [ 61.923441] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 61.923443] cfg80211: World regulatory domain updated: [ 61.923444] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 61.923446] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 61.923447] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 61.923448] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 61.923449] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 61.923450] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 66.076088] wlan0: authenticate with 98:4b:e1:2b:65:93 [ 66.144179] wlan0: send auth to 98:4b:e1:2b:65:93 (try 1/3) [ 66.145864] usb 1-1.1: new high-speed USB device number 5 using ehci_hcd [ 66.238232] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2513 [ 66.238244] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 66.238610] hub 1-1.1:1.0: USB hub found [ 66.238706] hub 1-1.1:1.0: 3 ports detected [ 66.309868] usb 1-1.2: new high-speed USB device number 6 using ehci_hcd [ 66.345701] wlan0: send auth to 98:4b:e1:2b:65:93 (try 2/3) [ 66.347529] wlan0: authenticated [ 66.349696] wlan0: associate with 98:4b:e1:2b:65:93 (try 1/3) [ 66.352580] wlan0: RX AssocResp from 98:4b:e1:2b:65:93 (capab=0x431 status=0 aid=1) [ 66.356564] wlan0: associated [ 66.402052] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2513 [ 66.402063] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 66.402430] hub 1-1.2:1.0: USB hub found [ 66.402527] hub 1-1.2:1.0: 3 ports detected [ 67.429456] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 68.494571] wlan0: disassociating from 98:4b:e1:2b:65:93 by local choice (reason=3) [ 68.503377] wlan0: deauthenticating from 98:4b:e1:2b:65:93 by local choice (reason=3) [ 68.504031] cfg80211: All devices are disconnected, going to restore regulatory settings [ 68.504034] cfg80211: Restoring regulatory settings [ 68.504037] cfg80211: Calling CRDA to update world regulatory domain [ 68.506298] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 68.506301] cfg80211: World regulatory domain updated: [ 68.506302] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 68.506303] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.506304] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 68.506305] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 68.506306] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 68.506307] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 70.654832] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 70.655246] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 72.643676] wlan0: authenticate with 98:4b:e1:2b:45:93 [ 72.646955] wlan0: send auth to 98:4b:e1:2b:45:93 (try 1/3) [ 72.847609] wlan0: send auth to 98:4b:e1:2b:45:93 (try 2/3) [ 72.862218] wlan0: authenticated [ 72.863632] wlan0: associate with 98:4b:e1:2b:45:93 (try 1/3) [ 73.067564] wlan0: associate with 98:4b:e1:2b:45:93 (try 2/3) [ 73.271470] wlan0: associate with 98:4b:e1:2b:45:93 (try 3/3) [ 73.475430] wlan0: association with 98:4b:e1:2b:45:93 timed out [ 83.635451] CPU1: Package power limit notification (total events = 1) [ 83.635454] CPU3: Package power limit notification (total events = 1) [ 83.635456] CPU2: Package power limit notification (total events = 1) [ 83.635457] CPU0: Package power limit notification (total events = 1) [ 83.646297] CPU1: Package power limit normal [ 83.646298] CPU3: Package power limit normal [ 83.646323] CPU0: Package power limit normal [ 83.646324] CPU2: Package power limit normal [ 105.913588] wlan0: authenticate with 98:4b:e1:2b:f4:b3 [ 105.969027] wlan0: send auth to 98:4b:e1:2b:f4:b3 (try 1/3) [ 106.172067] wlan0: send auth to 98:4b:e1:2b:f4:b3 (try 2/3) [ 106.174428] wlan0: authenticated [ 106.176039] wlan0: associate with 98:4b:e1:2b:f4:b3 (try 1/3) [ 106.179142] wlan0: RX AssocResp from 98:4b:e1:2b:f4:b3 (capab=0x431 status=0 aid=1) [ 106.182547] wlan0: associated [ 106.394941] wlan0: deauthenticated from 98:4b:e1:2b:f4:b3 (Reason: 6) [ 106.401728] cfg80211: All devices are disconnected, going to restore regulatory settings [ 106.401737] cfg80211: Restoring regulatory settings [ 106.401743] cfg80211: Calling CRDA to update world regulatory domain [ 106.406072] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 106.406076] cfg80211: World regulatory domain updated: [ 106.406077] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 106.406079] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.406081] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 106.406083] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 106.406085] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.406087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.594333] wlan0: authenticate with 98:4b:e1:2b:65:93 [ 106.649802] wlan0: send auth to 98:4b:e1:2b:65:93 (try 1/3) [ 106.651663] wlan0: authenticated [ 106.652132] wlan0: associate with 98:4b:e1:2b:65:93 (try 1/3) [ 106.654664] wlan0: RX AssocResp from 98:4b:e1:2b:65:93 (capab=0x431 status=0 aid=1) [ 106.657681] wlan0: associated [ 108.798647] wlan0: disassociating from 98:4b:e1:2b:65:93 by local choice (reason=3) [ 108.806339] cfg80211: All devices are disconnected, going to restore regulatory settings [ 108.806344] cfg80211: Restoring regulatory settings [ 108.806347] cfg80211: Calling CRDA to update world regulatory domain [ 108.807114] wlan0: deauthenticating from 98:4b:e1:2b:65:93 by local choice (reason=3) [ 108.811146] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 108.811153] cfg80211: World regulatory domain updated: [ 108.811157] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 108.811162] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 108.811167] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 108.811172] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 108.811176] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 108.811180] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 112.925585] wlan0: authenticate with 98:4b:e1:2b:0a:53 [ 112.979790] wlan0: send auth to 98:4b:e1:2b:0a:53 (try 1/3) [ 112.981588] wlan0: authenticated [ 112.985272] wlan0: associate with 98:4b:e1:2b:0a:53 (try 1/3) [ 112.988104] wlan0: RX AssocResp from 98:4b:e1:2b:0a:53 (capab=0x431 status=0 aid=1) [ 112.990176] wlan0: associated [ 115.117199] wlan0: disassociating from 98:4b:e1:2b:0a:53 by local choice (reason=3) [ 115.127042] cfg80211: All devices are disconnected, going to restore regulatory settings [ 115.127052] cfg80211: Restoring regulatory settings [ 115.128102] cfg80211: Calling CRDA to update world regulatory domain [ 115.128251] wlan0: deauthenticating from 98:4b:e1:2b:0a:53 by local choice (reason=3) [ 115.130611] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 115.130613] cfg80211: World regulatory domain updated: [ 115.130614] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 115.130616] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 115.130617] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 115.130618] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 115.130619] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 115.130620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 119.220499] wlan0: authenticate with 98:4b:e1:2b:45:93 [ 119.275094] wlan0: send auth to 98:4b:e1:2b:45:93 (try 1/3) [ 119.277666] wlan0: authenticated [ 119.278402] wlan0: associate with 98:4b:e1:2b:45:93 (try 1/3) [ 119.482450] wlan0: associate with 98:4b:e1:2b:45:93 (try 2/3) [ 119.686489] wlan0: associate with 98:4b:e1:2b:45:93 (try 3/3) [ 119.693698] wlan0: RX AssocResp from 98:4b:e1:2b:45:93 (capab=0x431 status=0 aid=1) [ 119.696725] wlan0: associated [ 128.091508] wlan0: deauthenticating from 98:4b:e1:2b:45:93 by local choice (reason=3) [ 128.125251] cfg80211: All devices are disconnected, going to restore regulatory settings [ 128.125256] cfg80211: Restoring regulatory settings [ 128.125259] cfg80211: Calling CRDA to update world regulatory domain [ 128.128688] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 128.128690] cfg80211: World regulatory domain updated: [ 128.128691] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 128.128693] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 128.128694] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 128.128695] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 128.128696] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 128.128697] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)