[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-21-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 (Ubuntu 3.5.0-21.32-generic 3.5.7.1) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic root=UUID=a12d74a6-b20a-42a7-9458-2111a25de2fd ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP31-DS3L/EP31-DS3L, BIOS F4 07/18/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC [ 0.000000] total RAM covered: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3583MB, range: 1MB, type UC [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 4GB, range: 512MB, type WB [ 0.000000] e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f60-0x000f4f6f] mapped at [ffff8800000f4f60] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdfedffff] [ 0.000000] [mem 0x00000000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfedffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xdfedffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x11fffffff @ [mem 0xdfede000-0xdfedffff] [ 0.000000] RAMDISK: [mem 0x362de000-0x37166fff] [ 0.000000] ACPI: RSDP 00000000000f6930 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfee3180 039B2 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: HPET 00000000dfee6c80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfee6d00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000dfee6b80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000dfee73a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fffc000-0x11fffffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfedffff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83584 r8192 d22912 u524288 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029737 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic root=UUID=a12d74a6-b20a-42a7-9458-2111a25de2fd ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4029920k/4718592k available (6718k kernel code, 525892k absent, 162780k reserved, 6452k data, 932k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.547 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.09 BogoMIPS (lpj=10666188) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004031] Security Framework initialized [ 0.004047] AppArmor: AppArmor initialized [ 0.004048] Yama: becoming mindful. [ 0.004372] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009509] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010383] Mount-cache hash table entries: 256 [ 0.010598] Initializing cgroup subsys cpuacct [ 0.010602] Initializing cgroup subsys memory [ 0.010611] Initializing cgroup subsys devices [ 0.010613] Initializing cgroup subsys freezer [ 0.010614] Initializing cgroup subsys blkio [ 0.010616] Initializing cgroup subsys perf_event [ 0.010646] CPU: Physical Processor ID: 0 [ 0.010647] CPU: Processor Core ID: 0 [ 0.010648] mce: CPU supports 6 MCE banks [ 0.010656] CPU0: Thermal monitoring enabled (TM2) [ 0.010660] using mwait in idle threads. [ 0.013063] ACPI: Core revision 20120320 [ 0.015439] ftrace: allocating 25138 entries in 99 pages [ 0.024421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067196] CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06 [ 0.068003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.068003] ... version: 2 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.068003] Booting Node 0, Processors #1 [ 0.076071] Brought up 2 CPUs [ 0.076075] Total of 2 processors activated (10666.18 BogoMIPS). [ 0.077718] devtmpfs: initialized [ 0.077718] EVM: security.selinux [ 0.077718] EVM: security.SMACK64 [ 0.077718] EVM: security.capability [ 0.080025] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes) [ 0.080664] dummy: [ 0.080690] RTC time: 18:10:12, date: 12/21/12 [ 0.080725] NET: Registered protocol family 16 [ 0.080760] Trying to unpack rootfs image as initramfs... [ 0.080887] ACPI: bus type pci registered [ 0.080936] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.080938] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.085858] PCI: Using configuration type 1 for base access [ 0.086747] bio: create slab at 0 [ 0.086831] ACPI: Added _OSI(Module Device) [ 0.086833] ACPI: Added _OSI(Processor Device) [ 0.086834] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.086836] ACPI: Added _OSI(Processor Aggregator Device) [ 0.087368] ACPI: EC: Look up EC in DSDT [ 0.090024] ACPI: SSDT 00000000dfee6d80 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.090158] ACPI: Dynamic OEM Table Load: [ 0.090160] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.090247] ACPI: SSDT 00000000dfee7240 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.090371] ACPI: Dynamic OEM Table Load: [ 0.090373] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.090474] ACPI: Interpreter enabled [ 0.090478] ACPI: (supports S0 S3 S4 S5) [ 0.090492] ACPI: Using IOAPIC for interrupt routing [ 0.093117] ACPI: No dock devices found. [ 0.093121] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.093160] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.093215] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.093217] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.093219] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.093221] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.093223] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] [ 0.093254] PCI host bridge to bus 0000:00 [ 0.093256] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.093258] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.093260] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.093262] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.093264] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff] [ 0.093273] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.093312] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.093348] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.093387] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.093400] pci 0000:00:1b.0: reg 10: [mem 0xf9100000-0xf9103fff 64bit] [ 0.093458] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.093479] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.093539] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.093560] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.093622] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.093642] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.093677] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f] [ 0.093704] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.093739] pci 0000:00:1d.1: reg 20: [io 0xe000-0xe01f] [ 0.093765] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.093800] pci 0000:00:1d.2: reg 20: [io 0xe100-0xe11f] [ 0.093827] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.093863] pci 0000:00:1d.3: reg 20: [io 0xe200-0xe21f] [ 0.093896] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.093911] pci 0000:00:1d.7: reg 10: [mem 0xf9104000-0xf91043ff] [ 0.093986] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.094041] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.094116] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.094119] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.094159] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a [ 0.094171] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.094178] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.094185] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.094191] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.094198] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f] [ 0.094228] pci 0000:00:1f.2: PME# supported from D3hot [ 0.094241] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.094287] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.094348] pci 0000:01:00.0: [10de:0391] type 00 class 0x030000 [ 0.094357] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf4ffffff] [ 0.094366] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.094375] pci 0000:01:00.0: reg 1c: [mem 0xf5000000-0xf5ffffff 64bit] [ 0.094382] pci 0000:01:00.0: reg 24: [io 0xb000-0xb07f] [ 0.094388] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.094421] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.094427] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.094430] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.094433] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.094436] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.094469] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.094473] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.094533] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.094550] pci 0000:03:00.0: reg 10: [io 0xc000-0xc0ff] [ 0.094579] pci 0000:03:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit] [ 0.094613] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.094689] pci 0000:03:00.0: supports D1 D2 [ 0.094690] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.094714] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.094723] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.094726] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.094729] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.094761] pci 0000:04:01.0: [1412:1712] type 00 class 0x040100 [ 0.094776] pci 0000:04:01.0: reg 10: [io 0xd000-0xd01f] [ 0.094785] pci 0000:04:01.0: reg 14: [io 0xd100-0xd10f] [ 0.094794] pci 0000:04:01.0: reg 18: [io 0xd200-0xd20f] [ 0.094803] pci 0000:04:01.0: reg 1c: [io 0xd300-0xd33f] [ 0.094849] pci 0000:04:01.0: supports D2 [ 0.094864] pci 0000:04:02.0: [168c:0013] type 00 class 0x020000 [ 0.094880] pci 0000:04:02.0: reg 10: [mem 0xf9000000-0xf900ffff] [ 0.094986] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) [ 0.094989] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.094993] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf90fffff] [ 0.094998] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.095000] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.095002] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.095004] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.095005] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 0.095021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.095078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.095104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.095129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.095188] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.095191] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.095192] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.099875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.099914] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.099955] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.099992] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.100036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.100074] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.100111] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.100149] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.100251] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.100254] vgaarb: loaded [ 0.100255] vgaarb: bridge control possible 0000:01:00.0 [ 0.100415] SCSI subsystem initialized [ 0.100468] libata version 3.00 loaded. [ 0.100488] ACPI: bus type usb registered [ 0.100508] usbcore: registered new interface driver usbfs [ 0.100516] usbcore: registered new interface driver hub [ 0.100535] usbcore: registered new device driver usb [ 0.100606] PCI: Using ACPI for IRQ routing [ 0.101880] PCI: pci_cache_line_size set to 64 bytes [ 0.101938] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.101940] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff] [ 0.102027] NetLabel: Initializing [ 0.102029] NetLabel: domain hash size = 128 [ 0.102030] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.102039] NetLabel: unlabeled traffic allowed by default [ 0.102089] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.102092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.102096] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.108116] Switching to clocksource hpet [ 0.115036] AppArmor: AppArmor Filesystem Enabled [ 0.115075] pnp: PnP ACPI init [ 0.115094] ACPI: bus type pnp registered [ 0.115205] pnp 00:00: [bus 00-3f] [ 0.115208] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.115210] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.115212] pnp 00:00: [io 0x0d00-0xffff window] [ 0.115214] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.115216] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.115218] pnp 00:00: [mem 0xdff00000-0xfebfffff window] [ 0.115285] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.115329] pnp 00:01: [io 0x0010-0x001f] [ 0.115331] pnp 00:01: [io 0x0022-0x003f] [ 0.115333] pnp 00:01: [io 0x0044-0x005f] [ 0.115334] pnp 00:01: [io 0x0062-0x0063] [ 0.115336] pnp 00:01: [io 0x0065-0x006f] [ 0.115338] pnp 00:01: [io 0x0074-0x007f] [ 0.115339] pnp 00:01: [io 0x0091-0x0093] [ 0.115341] pnp 00:01: [io 0x00a2-0x00bf] [ 0.115343] pnp 00:01: [io 0x00e0-0x00ef] [ 0.115344] pnp 00:01: [io 0x04d0-0x04d1] [ 0.115346] pnp 00:01: [io 0x0290-0x029f] [ 0.115348] pnp 00:01: [io 0x0800-0x087f] [ 0.115349] pnp 00:01: [io 0x0290-0x0294] [ 0.115351] pnp 00:01: [io 0x0880-0x088f] [ 0.115405] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.115408] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.115410] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.115412] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.115414] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.115417] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.115426] pnp 00:02: [dma 4] [ 0.115428] pnp 00:02: [io 0x0000-0x000f] [ 0.115430] pnp 00:02: [io 0x0080-0x0090] [ 0.115432] pnp 00:02: [io 0x0094-0x009f] [ 0.115436] pnp 00:02: [io 0x00c0-0x00df] [ 0.115459] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.115500] pnp 00:03: [irq 0 disabled] [ 0.115516] pnp 00:03: [irq 8] [ 0.115518] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.115543] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.115564] pnp 00:04: [io 0x0070-0x0073] [ 0.115589] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.115596] pnp 00:05: [io 0x0061] [ 0.115615] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.115622] pnp 00:06: [io 0x00f0-0x00ff] [ 0.115628] pnp 00:06: [irq 13] [ 0.115650] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.115833] pnp 00:07: [io 0x03f8-0x03ff] [ 0.115838] pnp 00:07: [irq 4] [ 0.115885] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.116037] pnp 00:08: [io 0x0378-0x037f] [ 0.116042] pnp 00:08: [irq 7] [ 0.116077] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.116160] pnp 00:09: [io 0x0400-0x04bf] [ 0.116197] system 00:09: [io 0x0400-0x04bf] has been reserved [ 0.116200] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.116335] pnp 00:0a: [mem 0xf0000000-0xf3ffffff] [ 0.116378] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.116381] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.116484] pnp 00:0b: [mem 0x000ce000-0x000cffff] [ 0.116486] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.116488] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.116490] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.116492] pnp 00:0b: [mem 0xdfee0000-0xdfefffff] [ 0.116493] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.116495] pnp 00:0b: [mem 0x00100000-0xdfedffff] [ 0.116497] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.116499] pnp 00:0b: [mem 0xfed13000-0xfed1dfff] [ 0.116500] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] [ 0.116502] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.116504] pnp 00:0b: [mem 0xffb00000-0xffb7ffff] [ 0.116505] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.116507] pnp 00:0b: [mem 0x000e0000-0x000effff] [ 0.116554] system 00:0b: [mem 0x000ce000-0x000cffff] has been reserved [ 0.116556] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.116558] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.116561] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.116563] system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.116565] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.116567] system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.116569] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.116572] system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.116574] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.116576] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.116578] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.116580] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.116582] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved [ 0.116585] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.116600] pnp 00:0c: [mem 0xffb80000-0xffbfffff] [ 0.116628] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active) [ 0.116632] pnp: PnP ACPI: found 13 devices [ 0.116634] ACPI: ACPI bus type pnp unregistered [ 0.122484] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000 [ 0.122489] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000 [ 0.122497] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000 [ 0.122509] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.122512] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.122514] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 [ 0.122519] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 0.122522] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.122525] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf9600000-0xf98fffff pref] [ 0.122528] pci 0000:01:00.0: BAR 6: assigned [mem 0xf6000000-0xf601ffff pref] [ 0.122531] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.122533] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.122537] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.122540] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.122543] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.122546] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.122550] pci 0000:00:1c.0: bridge window [mem 0xf9200000-0xf93fffff] [ 0.122553] pci 0000:00:1c.0: bridge window [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.122559] pci 0000:03:00.0: BAR 6: assigned [mem 0xf9600000-0xf961ffff pref] [ 0.122561] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.122563] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.122567] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.122571] pci 0000:00:1c.3: bridge window [mem 0xf9600000-0xf98fffff pref] [ 0.122576] pci 0000:00:1e.0: PCI bridge to [bus 04-04] [ 0.122579] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.122583] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf90fffff] [ 0.122615] pci 0000:00:1e.0: setting latency timer to 64 [ 0.122619] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.122621] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.122622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.122624] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.122626] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.122628] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.122630] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff] [ 0.122632] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.122634] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.122636] pci_bus 0000:02: resource 1 [mem 0xf9200000-0xf93fffff] [ 0.122638] pci_bus 0000:02: resource 2 [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.122640] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.122641] pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf8ffffff] [ 0.122643] pci_bus 0000:03: resource 2 [mem 0xf9600000-0xf98fffff pref] [ 0.122646] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.122647] pci_bus 0000:04: resource 1 [mem 0xf9000000-0xf90fffff] [ 0.122649] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.122651] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.122653] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.122655] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.122657] pci_bus 0000:04: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.122694] NET: Registered protocol family 2 [ 0.122814] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.123690] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.127391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.127867] TCP: Hash tables configured (established 524288 bind 65536) [ 0.127869] TCP: reno registered [ 0.127880] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.127932] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.128072] NET: Registered protocol family 1 [ 0.128240] pci 0000:01:00.0: Boot video device [ 0.128250] PCI: CLS 32 bytes, default 64 [ 0.128252] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.128255] software IO TLB [mem 0xdbede000-0xdfeddfff] (64MB) mapped at [ffff8800dbede000-ffff8800dfeddfff] [ 0.128600] audit: initializing netlink socket (disabled) [ 0.128612] type=2000 audit(1356113412.128:1): initialized [ 0.146994] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.148732] VFS: Disk quotas dquot_6.5.2 [ 0.148769] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.149199] fuse init (API version 7.19) [ 0.149262] msgmni has been set to 7870 [ 0.149525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.149548] io scheduler noop registered [ 0.149550] io scheduler deadline registered (default) [ 0.149577] io scheduler cfq registered [ 0.149693] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.149758] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.149837] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.149901] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.149920] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.149960] intel_idle: does not run on family 6 model 23 [ 0.150024] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.150028] ACPI: Power Button [PWRB] [ 0.150070] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.150072] ACPI: Power Button [PWRF] [ 0.150141] ACPI: Requesting acpi_cpufreq [ 0.315906] Freeing initrd memory: 14884k freed [ 0.323213] GHES: HEST is not enabled! [ 0.323296] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.343650] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.365028] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.365222] Linux agpgart interface v0.103 [ 0.366474] brd: module loaded [ 0.367079] loop: module loaded [ 0.367182] ata_piix 0000:00:1f.2: version 2.13 [ 0.367196] ata_piix 0000:00:1f.2: MAP [ [ 0.367197] P0 P2 P1 P3 ] [ 0.367226] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.367455] scsi0 : ata_piix [ 0.367520] scsi1 : ata_piix [ 0.367879] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.367881] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.368134] Fixed MDIO Bus: probed [ 0.368171] tun: Universal TUN/TAP device driver, 1.6 [ 0.368172] tun: (C) 1999-2004 Max Krasnyansky [ 0.368207] PPP generic driver version 2.4.2 [ 0.368240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.368272] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.368275] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.368281] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.368298] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.372182] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.372195] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9104000 [ 0.384016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.384062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.384066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.384069] usb usb1: Product: EHCI Host Controller [ 0.384072] usb usb1: Manufacturer: Linux 3.5.0-21-generic ehci_hcd [ 0.384075] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.384170] hub 1-0:1.0: USB hub found [ 0.384174] hub 1-0:1.0: 8 ports detected [ 0.384232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.384244] uhci_hcd: USB Universal Host Controller Interface driver [ 0.384259] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.384262] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.384270] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.384291] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.384317] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.384319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.384321] usb usb2: Product: UHCI Host Controller [ 0.384322] usb usb2: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.384324] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.384392] hub 2-0:1.0: USB hub found [ 0.384396] hub 2-0:1.0: 2 ports detected [ 0.384446] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.384449] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.384453] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.384480] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000 [ 0.384504] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.384507] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.384508] usb usb3: Product: UHCI Host Controller [ 0.384510] usb usb3: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.384512] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.384579] hub 3-0:1.0: USB hub found [ 0.384583] hub 3-0:1.0: 2 ports detected [ 0.384631] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.384634] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.384638] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.384666] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100 [ 0.384691] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.384693] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.384695] usb usb4: Product: UHCI Host Controller [ 0.384697] usb usb4: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.384699] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.384766] hub 4-0:1.0: USB hub found [ 0.384769] hub 4-0:1.0: 2 ports detected [ 0.384819] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.384822] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.384826] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.384852] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200 [ 0.384879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.384881] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.384883] usb usb5: Product: UHCI Host Controller [ 0.384885] usb usb5: Manufacturer: Linux 3.5.0-21-generic uhci_hcd [ 0.384886] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.384953] hub 5-0:1.0: USB hub found [ 0.384956] hub 5-0:1.0: 2 ports detected [ 0.385042] usbcore: registered new interface driver libusual [ 0.385068] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.385412] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.385420] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.385552] mousedev: PS/2 mouse device common for all mice [ 0.385657] rtc_cmos 00:04: RTC can wake from S4 [ 0.385759] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.385780] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.385840] device-mapper: uevent: version 1.0.3 [ 0.385890] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.385896] cpuidle: using governor ladder [ 0.385897] cpuidle: using governor menu [ 0.385898] EFI Variables Facility v0.08 2004-May-17 [ 0.386035] ashmem: initialized [ 0.386131] TCP: cubic registered [ 0.386216] NET: Registered protocol family 10 [ 0.386385] NET: Registered protocol family 17 [ 0.386393] Key type dns_resolver registered [ 0.386488] PM: Hibernation image not present or could not be loaded. [ 0.386505] registered taskstats version 1 [ 0.388544] Key type trusted registered [ 0.390089] Key type encrypted registered [ 0.391823] Magic number: 8:142:191 [ 0.391876] acpi device:1d: hash matches [ 0.391920] rtc_cmos 00:04: setting system clock to 2012-12-21 18:10:12 UTC (1356113412) [ 0.393543] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.393547] EDD information not available. [ 0.571300] ata1.00: HPA detected: current 312579695, native 312581808 [ 0.571306] ata1.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133 [ 0.571309] ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.588629] ata2.00: HPA detected: current 1465147055, native 1465149168 [ 0.588635] ata2.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133 [ 0.588638] ata2.00: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.588645] ata2.01: ATAPI: PIONEER DVD-RW DVR-216, 1.06, max UDMA/66 [ 0.637933] ata1.00: configured for UDMA/133 [ 0.638049] scsi 0:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5 [ 0.638174] sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB) [ 0.638182] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.638225] sd 0:0:0:0: [sda] Write Protect is off [ 0.638228] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.638253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.655260] ata2.00: configured for UDMA/133 [ 0.668121] ata2.01: configured for UDMA/66 [ 0.696020] usb 1-3: new high-speed USB device number 2 using ehci_hcd [ 0.708390] sda: sda1 sda2 < sda5 sda6 > [ 0.708725] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.708781] scsi 1:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5 [ 0.708855] sd 1:0:0:0: [sdb] 1465147055 512-byte logical blocks: (750 GB/698 GiB) [ 0.708886] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.708901] sd 1:0:0:0: [sdb] Write Protect is off [ 0.708904] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.708923] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.774119] sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 > [ 0.774478] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.805565] scsi 1:0:1:0: CD-ROM PIONEER DVD-RW DVR-216 1.06 PQ: 0 ANSI: 5 [ 0.836867] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.836869] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.836965] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 0.837051] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 0.838141] Freeing unused kernel memory: 932k freed [ 0.838343] Write protecting the kernel read-only data: 12288k [ 0.841913] Freeing unused kernel memory: 1464k freed [ 0.844840] Freeing unused kernel memory: 1120k freed [ 0.857561] udevd[95]: starting version 175 [ 0.912901] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.913008] r8169 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.913152] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9000063c000, 00:1f:d0:90:28:10, XID 18000000 IRQ 43 [ 0.913155] r8169 0000:03:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.128019] Refined TSC clocksource calibration: 2666.666 MHz. [ 1.128026] Switching to clocksource tsc [ 1.270462] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 1.270466] EXT4-fs (sda6): write access will be enabled during recovery [ 1.383119] usb 1-3: New USB device found, idVendor=0bda, idProduct=0151 [ 1.383125] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.383129] usb 1-3: Product: USB2.0-CRW [ 1.383132] usb 1-3: Manufacturer: Generic [ 1.383135] usb 1-3: SerialNumber: 20060413092100000 [ 1.386096] Initializing USB Mass Storage driver... [ 1.386179] scsi2 : usb-storage 1-3:1.0 [ 1.386237] usbcore: registered new interface driver usb-storage [ 1.386238] USB Mass Storage support registered. [ 1.766115] EXT4-fs (sda6): orphan cleanup on readonly fs [ 1.766124] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 261740 [ 1.766192] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 261744 [ 1.782701] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 1317477 [ 1.801348] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 3009062 [ 1.809614] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 3015258 [ 1.809665] EXT4-fs (sda6): 5 orphan inodes deleted [ 1.809667] EXT4-fs (sda6): recovery complete [ 1.974237] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 2.048018] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.230890] usb 5-1: New USB device found, idVendor=046d, idProduct=c52f [ 2.230896] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.230900] usb 5-1: Product: USB Receiver [ 2.230903] usb 5-1: Manufacturer: Logitech [ 2.390510] scsi 2:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.396754] scsi 2:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.403003] scsi 2:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.409254] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.409795] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 2.409913] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 2.410022] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 2.410136] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 2.416492] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 2.417242] sd 2:0:0:1: [sdd] Attached SCSI removable disk [ 2.417992] sd 2:0:0:2: [sde] Attached SCSI removable disk [ 2.418741] sd 2:0:0:3: [sdf] Attached SCSI removable disk [ 2.476018] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 2.655891] usb 5-2: New USB device found, idVendor=1241, idProduct=f750 [ 2.655896] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.655900] usb 5-2: Product: Wireless TrackballKeyboard [ 2.655903] usb 5-2: Manufacturer: FOCUS [ 18.464854] Adding 2096412k swap on /dev/sdb5. Priority:-1 extents:1 across:2096412k [ 19.080256] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 19.515650] kjournald starting. Commit interval 5 seconds [ 19.515744] EXT3-fs (sdb6): warning: maximal mount count reached, running e2fsck is recommended [ 19.599872] EXT3-fs (sdb6): using internal journal [ 19.623089] EXT3-fs (sdb6): recovery complete [ 19.623092] EXT3-fs (sdb6): mounted filesystem with ordered data mode [ 19.629740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.675910] udevd[487]: starting version 175 [ 19.813897] type=1400 audit(1356073831.918:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=523 comm="apparmor_parser" [ 19.814216] type=1400 audit(1356073831.918:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser" [ 19.814399] type=1400 audit(1356073831.918:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser" [ 19.850191] lp: driver loaded but no devices found [ 19.862497] parport_pc 00:08: reported by Plug and Play ACPI [ 19.862543] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 19.952118] lp0: using parport0 (interrupt-driven). [ 19.954360] intel_rng: FWH not detected [ 19.990804] wmi: Mapper loaded [ 20.007729] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c [ 20.046225] ppdev: user-space parallel port driver [ 20.104265] ACPI Warning: 0x00000000fed1f410-0x00000000fed1f414 SystemMemory conflicts with Region \RCRB 1 (20120320/utaddress-251) [ 20.104338] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.104339] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 20.104342] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251) [ 20.104346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.104387] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 20.315756] cfg80211: Calling CRDA to update world regulatory domain [ 20.320711] cfg80211: World regulatory domain updated: [ 20.320715] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.320717] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.320718] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.320720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.320721] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.320723] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.332143] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c [ 20.333527] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 20.342243] leds_ss4200: no LED devices found [ 20.423430] usbcore: registered new interface driver usbhid [ 20.423433] usbhid: USB HID core driver [ 20.500388] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input2 [ 20.501686] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0 [ 20.506013] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input3 [ 20.507227] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1 [ 20.507483] input: FOCUS Wireless TrackballKeyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4 [ 20.510317] hid-generic 0003:1241:F750.0003: input,hidraw2: USB HID v1.10 Keyboard [FOCUS Wireless TrackballKeyboard] on usb-0000:00:1d.3-2/input0 [ 20.511178] input: FOCUS Wireless TrackballKeyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5 [ 20.512784] hid-generic 0003:1241:F750.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [FOCUS Wireless TrackballKeyboard] on usb-0000:00:1d.3-2/input1 [ 20.530571] gpio_ich: GPIO from 206 to 255 on gpio_ich [ 20.704178] [drm] Initialized drm 1.1.0 20060810 [ 20.904201] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 20.921195] ath5k 0000:04:02.0: registered as 'phy0' [ 20.995871] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 20.995990] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 20.996096] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 20.996195] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 20.996294] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 20.996391] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 20.996489] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.996587] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 21.078423] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b100a2) [ 21.080279] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 21.115951] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 21.115953] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [ 21.115955] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 21.115958] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.37 [ 21.115961] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 21.115962] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [ 21.116215] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 21.116217] [drm] nouveau 0000:01:00.0: DCB version 3.0 [ 21.116219] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028 [ 21.116221] [drm] nouveau 0000:01:00.0: DCB outp 01: 03000302 00000000 [ 21.116222] [drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028 [ 21.116224] [drm] nouveau 0000:01:00.0: DCB outp 03: 04011312 00000000 [ 21.116225] [drm] nouveau 0000:01:00.0: DCB outp 04: 020223f1 00c0c080 [ 21.116226] [drm] nouveau 0000:01:00.0: DCB conn 00: 1030 [ 21.116228] [drm] nouveau 0000:01:00.0: DCB conn 01: 2130 [ 21.116230] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210 [ 21.116231] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211 [ 21.116233] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213 [ 21.116238] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD04A [ 21.116284] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD6D6 [ 21.128422] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDF55 [ 21.128436] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE0D9 [ 21.131584] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE3FB [ 21.134087] [TTM] Zone kernel: Available graphics memory: 2024160 kiB [ 21.134090] [TTM] Initializing pool allocator [ 21.134094] [TTM] Initializing DMA pool allocator [ 21.134104] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3) [ 21.134122] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 21.139159] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 21.142379] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 21.142382] [drm] No driver support for vblank timestamp query. [ 21.201911] adt7475 2-002e: ADT7473 device, revision 7 [ 21.201915] adt7475 2-002e: Optional features: fan4 [ 21.201917] adt7475 2-002e: Bypassing attenuators on: in1 [ 21.379430] i2c i2c-2: found f75375 version: 15 [ 21.379435] [drm] nouveau 0000:01:00.0: Detected monitoring device: f75375 [ 21.379455] [drm] nouveau 0000:01:00.0: 2 available performance level(s) [ 21.379459] [drm] nouveau 0000:01:00.0: 0: core 560MHz shader 560MHz memory 700MHz voltage 1300mV fanspeed 31% [ 21.379461] [drm] nouveau 0000:01:00.0: 1: core 560MHz shader 560MHz memory 700MHz voltage 1300mV fanspeed 40% [ 21.379464] [drm] nouveau 0000:01:00.0: c: core 558MHz shader 558MHz memory 702MHz fanspeed 31% [ 21.381282] [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies [ 21.381289] [drm] nouveau 0000:01:00.0: 0xC483: Parsing digital output script table [ 21.430961] [drm] nouveau 0000:01:00.0: 0xC4D3: Parsing digital output script table [ 21.484178] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 21.484184] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 21.484186] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 21.484188] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3) [ 21.484189] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4) [ 21.555274] ath: EEPROM regdomain: 0x0 [ 21.555279] ath: EEPROM indicates default country code should be used [ 21.555280] ath: doing EEPROM country->regdmn map search [ 21.555283] ath: country maps to regdmn code: 0x3a [ 21.555285] ath: Country alpha2 being used: US [ 21.555287] ath: Regpair used: 0x3a [ 21.555290] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 21.555293] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555296] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 21.555299] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555301] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 21.555304] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555306] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 21.555309] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555311] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 21.555314] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555316] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 21.555319] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555321] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 21.555324] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555326] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 21.555329] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555331] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 21.555334] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555337] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 21.555339] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555342] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 21.555344] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 21.555347] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 21.555349] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 21.555351] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 21.555459] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 21.555461] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555463] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 21.555464] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555466] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 21.555467] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555469] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 21.555471] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555472] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 21.555474] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555475] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 21.555477] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555478] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 21.555480] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555481] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 21.555483] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555484] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 21.555486] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555487] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 21.555489] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555490] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 21.555492] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.555493] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 21.555495] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.555497] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 21.555498] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.555500] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 21.555501] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.580886] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 21.581094] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45) [ 21.581234] cfg80211: Calling CRDA for country: US [ 21.592795] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x49000, bo ffff880102292c00 [ 21.592870] fbcon: nouveaufb (fb0) is primary device [ 21.592991] Console: switching to colour frame buffer device 240x67 [ 21.593035] fb0: nouveaufb frame buffer device [ 21.593036] drm: registered panic notifier [ 21.593041] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 21.619701] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 21.619705] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619707] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 21.619709] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619710] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 21.619712] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619713] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 21.619715] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619717] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 21.619718] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619720] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 21.619721] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619723] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 21.619724] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619726] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 21.619728] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619729] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 21.619731] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619732] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 21.619734] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619735] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 21.619737] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619738] cfg80211: Disabling freq 2467 MHz [ 21.619739] cfg80211: Disabling freq 2472 MHz [ 21.619740] cfg80211: Disabling freq 2484 MHz [ 21.619743] cfg80211: Regulatory domain changed to country: US [ 21.619744] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.619746] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 21.619748] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 21.619749] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.619751] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.619752] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.619754] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 23.073531] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null) [ 24.664132] init: failsafe main process (987) killed by TERM signal [ 24.737680] type=1400 audit(1356073836.842:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1084 comm="apparmor_parser" [ 24.738147] type=1400 audit(1356073836.842:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1085 comm="apparmor_parser" [ 24.738409] type=1400 audit(1356073836.842:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1085 comm="apparmor_parser" [ 24.741067] type=1400 audit(1356073836.846:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1086 comm="apparmor_parser" [ 24.741331] type=1400 audit(1356073836.846:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1086 comm="apparmor_parser" [ 24.747584] type=1400 audit(1356073836.850:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1087 comm="apparmor_parser" [ 24.747927] type=1400 audit(1356073836.850:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1087 comm="apparmor_parser" [ 24.876696] Bluetooth: Core ver 2.16 [ 24.876715] NET: Registered protocol family 31 [ 24.876716] Bluetooth: HCI device and connection manager initialized [ 24.876718] Bluetooth: HCI socket layer initialized [ 24.876719] Bluetooth: L2CAP socket layer initialized [ 24.876724] Bluetooth: SCO socket layer initialized [ 24.915123] r8169 0000:03:00.0: eth0: link down [ 24.917175] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.917446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.941390] init: gdm main process (1190) killed by TERM signal [ 24.948851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.949489] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready