[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-7-generic (buildd@yellow) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.1-10ubuntu3) ) #19-Ubuntu SMP Tue Nov 30 23:45:33 UTC 2010 (Ubuntu 2.6.37-7.19-generic 2.6.37-rc3) [ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009f790000 (usable) [ 0.000000] BIOS-e820: 000000009f790000 - 000000009f7e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009f7e3000 - 000000009f7f0000 (ACPI data) [ 0.000000] BIOS-e820: 000000009f7f0000 - 00000000a0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001e0000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: X58 SLI Classified/OEM, BIOS 6.00 PG 03/26/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x1e0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 100000000 mask F80000000 write-back [ 0.000000] 1 base 180000000 mask FC0000000 write-back [ 0.000000] 2 base 1C0000000 mask FE0000000 write-back [ 0.000000] 3 base 000000000 mask F80000000 write-back [ 0.000000] 4 base 080000000 mask FE0000000 write-back [ 0.000000] 5 base 0A0000000 mask FFF000000 write-back [ 0.000000] 6 base 0A0800000 mask FFF800000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000a0800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x9f790 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5320] f5320 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000009f790000 [ 0.000000] 0000000000 - 009f600000 page 2M [ 0.000000] 009f600000 - 009f790000 page 4k [ 0.000000] kernel direct mapping tables up to 9f790000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001e0000000 [ 0.000000] 0100000000 - 01e0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1e0000000 @ 9f787000-9f790000 [ 0.000000] RAMDISK: 7f327000 - 80000000 [ 0.000000] ACPI: RSDP 00000000000f9560 00024 (v02 IntelR) [ 0.000000] ACPI: XSDT 000000009f7e3080 0004C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000009f7eae80 000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20101013/tbfadt-557) [ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20101013/tbfadt-607) [ 0.000000] ACPI: DSDT 000000009f7e3200 0783E (v01 INTELR AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000009f790000 00040 [ 0.000000] ACPI: SLIC 000000009f7eaa40 00424 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: MCFG 000000009f7eb080 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000009f7eaf80 000BC (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 000000009f7eb0c0 01C74 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001e0000000 [ 0.000000] Initmem setup node 0 0000000000000000-00000001e0000000 [ 0.000000] NODE_DATA [00000001dfffb000 - 00000001dfffffff] [ 0.000000] [ffffea0000000000-ffffea00069fffff] PMD -> [ffff8801d9e00000-ffff8801df3fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001e0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0009f790 [ 0.000000] 0: 0x00100000 -> 0x001e0000 [ 0.000000] On node 0 totalpages: 1570590 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 634824 pages, LIFO batch:31 [ 0.000000] Normal zone: 12544 pages used for memmap [ 0.000000] Normal zone: 904960 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009f790000 - 000000009f7e3000 [ 0.000000] PM: Registered nosave memory: 000000009f7e3000 - 000000009f7f0000 [ 0.000000] PM: Registered nosave memory: 000000009f7f0000 - 00000000a0000000 [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88009f400000 s83712 r8192 d22784 u262144 [ 0.000000] pcpu-alloc: s83712 r8192 d22784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1543704 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 6100900k/7864320k available (5904k kernel code, 1581960k absent, 181460k reserved, 5014k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 62914560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] Fast TSC calibration using PIT [ 0.020000] Detected 2653.332 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5306.66 BogoMIPS (lpj=26533320) [ 0.000008] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000035] AppArmor: AppArmor initialized [ 0.000036] Yama: becoming mindful. [ 0.000689] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002202] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002797] Mount-cache hash table entries: 256 [ 0.002882] Initializing cgroup subsys ns [ 0.002885] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.002886] Initializing cgroup subsys cpuacct [ 0.002890] Initializing cgroup subsys memory [ 0.002895] Initializing cgroup subsys devices [ 0.002897] Initializing cgroup subsys freezer [ 0.002898] Initializing cgroup subsys net_cls [ 0.002919] CPU: Physical Processor ID: 0 [ 0.002920] CPU: Processor Core ID: 0 [ 0.002924] mce: CPU supports 9 MCE banks [ 0.002933] CPU0: Thermal monitoring enabled (TM1) [ 0.002938] using mwait in idle threads. [ 0.002940] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. [ 0.002945] ... version: 3 [ 0.002946] ... bit width: 48 [ 0.002947] ... generic registers: 4 [ 0.002948] ... value mask: 0000ffffffffffff [ 0.002950] ... max period: 000000007fffffff [ 0.002951] ... fixed-purpose events: 3 [ 0.002952] ... event mask: 000000070000000f [ 0.004585] ACPI: Core revision 20101013 [ 0.014067] ftrace: allocating 24000 entries in 95 pages [ 0.020366] Setting APIC routing to flat [ 0.020715] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.120481] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.239155] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. [ 2.233700] Brought up 8 CPUs [ 2.233703] Total of 8 processors activated (42453.69 BogoMIPS). [ 2.237414] devtmpfs: initialized [ 2.238150] regulator: core version 0.5 [ 2.238178] regulator: dummy: [ 2.238201] Time: 20:35:56 Date: 01/03/11 [ 2.238225] NET: Registered protocol family 16 [ 2.238299] Trying to unpack rootfs image as initramfs... [ 2.238307] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.238309] ACPI: bus type pci registered [ 2.238373] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.238376] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 2.264908] PCI: Using configuration type 1 for base access [ 2.265423] bio: create slab at 0 [ 2.266525] ACPI: EC: Look up EC in DSDT [ 2.273303] ACPI: Interpreter enabled [ 2.273305] ACPI: (supports S0 S1 S4 S5) [ 2.273319] ACPI: Using IOAPIC for interrupt routing [ 2.277725] ACPI: No dock devices found. [ 2.277728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.524610] Freeing initrd memory: 13156k freed [ 4.588005] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.588183] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 4.588186] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.588187] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.588189] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 4.588191] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff] [ 4.588204] pci 0000:00:00.0: [8086:3400] type 0 class 0x000600 [ 4.588246] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 4.588249] pci 0000:00:00.0: PME# disabled [ 4.588270] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 4.588311] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.588314] pci 0000:00:01.0: PME# disabled [ 4.588337] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 4.588378] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 4.588381] pci 0000:00:03.0: PME# disabled [ 4.588405] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 4.588446] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 4.588449] pci 0000:00:07.0: PME# disabled [ 4.588472] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 4.588527] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 4.588581] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 4.588633] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 4.588703] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 4.588745] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 4.588797] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 4.588840] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 4.588886] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 4.588929] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 4.588980] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 4.589003] pci 0000:00:1a.7: reg 10: [mem 0xf3ffe000-0xf3ffe3ff] [ 4.589073] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 4.589080] pci 0000:00:1a.7: PME# disabled [ 4.589113] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 4.589130] pci 0000:00:1b.0: reg 10: [mem 0xf3ff4000-0xf3ff7fff 64bit] [ 4.589187] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 4.589194] pci 0000:00:1b.0: PME# disabled [ 4.589223] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 4.589281] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 4.589288] pci 0000:00:1c.0: PME# disabled [ 4.589318] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604 [ 4.589371] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 4.589378] pci 0000:00:1c.1: PME# disabled [ 4.589405] pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604 [ 4.589462] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 4.589469] pci 0000:00:1c.2: PME# disabled [ 4.589500] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 4.589558] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 4.589565] pci 0000:00:1c.4: PME# disabled [ 4.589599] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 4.589642] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 4.589693] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 4.589735] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 4.589786] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 4.589829] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 4.589884] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 4.589907] pci 0000:00:1d.7: reg 10: [mem 0xf3ffd000-0xf3ffd3ff] [ 4.589977] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 4.589984] pci 0000:00:1d.7: PME# disabled [ 4.590013] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 4.590075] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 4.590159] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 4.590167] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 4.590174] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 4.590182] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0007) [ 4.590229] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 4.590250] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907] [ 4.590261] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803] [ 4.590272] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707] [ 4.590283] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603] [ 4.590294] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f] [ 4.590305] pci 0000:00:1f.2: reg 24: [mem 0xf3ffc000-0xf3ffc7ff] [ 4.590343] pci 0000:00:1f.2: PME# supported from D3hot [ 4.590350] pci 0000:00:1f.2: PME# disabled [ 4.590376] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 4.590394] pci 0000:00:1f.3: reg 10: [mem 0xf3ffb000-0xf3ffb0ff 64bit] [ 4.590417] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 4.590478] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 4.590481] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 4.590484] pci 0000:00:01.0: bridge window [mem 0xf3200000-0xf32fffff] [ 4.590488] pci 0000:00:01.0: bridge window [mem 0xf3100000-0xf31fffff 64bit pref] [ 4.590535] pci 0000:02:00.0: [10de:0615] type 0 class 0x000300 [ 4.590548] pci 0000:02:00.0: reg 10: [mem 0xde000000-0xdeffffff] [ 4.590561] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.590574] pci 0000:02:00.0: reg 1c: [mem 0xdc000000-0xddffffff 64bit] [ 4.590583] pci 0000:02:00.0: reg 24: [io 0xcf00-0xcf7f] [ 4.590592] pci 0000:02:00.0: reg 30: [mem 0xdffe0000-0xdfffffff pref] [ 4.590635] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 4.590638] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 4.590641] pci 0000:00:03.0: bridge window [mem 0xdc000000-0xdfffffff] [ 4.590645] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.590684] pci 0000:03:00.0: [10de:05b1] type 1 class 0x000604 [ 4.590720] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 4.590723] pci 0000:03:00.0: PME# disabled [ 4.590732] pci 0000:00:07.0: PCI bridge to [bus 03-06] [ 4.590735] pci 0000:00:07.0: bridge window [io 0xa000-0xbfff] [ 4.590738] pci 0000:00:07.0: bridge window [mem 0xf2f00000-0xf30fffff] [ 4.590742] pci 0000:00:07.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref] [ 4.590775] pci 0000:04:00.0: [10de:05b1] type 1 class 0x000604 [ 4.590808] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 4.590811] pci 0000:04:00.0: PME# disabled [ 4.590826] pci 0000:04:02.0: [10de:05b1] type 1 class 0x000604 [ 4.590860] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 4.590863] pci 0000:04:02.0: PME# disabled [ 4.590889] pci 0000:03:00.0: PCI bridge to [bus 04-06] [ 4.590893] pci 0000:03:00.0: bridge window [io 0xa000-0xbfff] [ 4.590896] pci 0000:03:00.0: bridge window [mem 0xf2f00000-0xf30fffff] [ 4.590900] pci 0000:03:00.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref] [ 4.590922] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 4.590927] pci 0000:04:00.0: bridge window [io 0xb000-0xbfff] [ 4.590929] pci 0000:04:00.0: bridge window [mem 0xf3000000-0xf30fffff] [ 4.590934] pci 0000:04:00.0: bridge window [mem 0xf3600000-0xf36fffff 64bit pref] [ 4.590957] pci 0000:04:02.0: PCI bridge to [bus 06-06] [ 4.590961] pci 0000:04:02.0: bridge window [io 0xa000-0xafff] [ 4.590964] pci 0000:04:02.0: bridge window [mem 0xf2f00000-0xf2ffffff] [ 4.590968] pci 0000:04:02.0: bridge window [mem 0xf3500000-0xf35fffff 64bit pref] [ 4.591043] pci 0000:07:00.0: [197b:2363] type 0 class 0x000106 [ 4.591130] pci 0000:07:00.0: reg 24: [mem 0xf3efe000-0xf3efffff] [ 4.591177] pci 0000:07:00.0: PME# supported from D3hot [ 4.591185] pci 0000:07:00.0: PME# disabled [ 4.591221] pci 0000:07:00.1: [197b:2363] type 0 class 0x000101 [ 4.591248] pci 0000:07:00.1: reg 10: [io 0x8f00-0x8f07] [ 4.591264] pci 0000:07:00.1: reg 14: [io 0x8e00-0x8e03] [ 4.591280] pci 0000:07:00.1: reg 18: [io 0x8d00-0x8d07] [ 4.591296] pci 0000:07:00.1: reg 1c: [io 0x8c00-0x8c03] [ 4.591312] pci 0000:07:00.1: reg 20: [io 0x8b00-0x8b0f] [ 4.591378] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 4.591380] pci 0000:00:1c.0: PCI bridge to [bus 07-07] [ 4.591387] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff] [ 4.591394] pci 0000:00:1c.0: bridge window [mem 0xf3e00000-0xf3efffff] [ 4.591403] pci 0000:00:1c.0: bridge window [mem 0xf3d00000-0xf3dfffff 64bit pref] [ 4.591467] pci 0000:08:00.0: [197b:2363] type 0 class 0x000106 [ 4.591554] pci 0000:08:00.0: reg 24: [mem 0xf3cfe000-0xf3cfffff] [ 4.591600] pci 0000:08:00.0: PME# supported from D3hot [ 4.591608] pci 0000:08:00.0: PME# disabled [ 4.591644] pci 0000:08:00.1: [197b:2363] type 0 class 0x000101 [ 4.591670] pci 0000:08:00.1: reg 10: [io 0x7f00-0x7f07] [ 4.591686] pci 0000:08:00.1: reg 14: [io 0x7e00-0x7e03] [ 4.591702] pci 0000:08:00.1: reg 18: [io 0x7d00-0x7d07] [ 4.591718] pci 0000:08:00.1: reg 1c: [io 0x7c00-0x7c03] [ 4.591734] pci 0000:08:00.1: reg 20: [io 0x7b00-0x7b0f] [ 4.591803] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 4.591806] pci 0000:00:1c.1: PCI bridge to [bus 08-08] [ 4.591813] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 4.591820] pci 0000:00:1c.1: bridge window [mem 0xf3c00000-0xf3cfffff] [ 4.591829] pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff 64bit pref] [ 4.591899] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200 [ 4.591918] pci 0000:09:00.0: reg 10: [io 0x6e00-0x6eff] [ 4.591948] pci 0000:09:00.0: reg 18: [mem 0xf3aff000-0xf3afffff 64bit] [ 4.591968] pci 0000:09:00.0: reg 20: [mem 0xf39f0000-0xf39fffff 64bit pref] [ 4.591983] pci 0000:09:00.0: reg 30: [mem 0xf3ac0000-0xf3adffff pref] [ 4.592027] pci 0000:09:00.0: supports D1 D2 [ 4.592028] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.592036] pci 0000:09:00.0: PME# disabled [ 4.592065] pci 0000:00:1c.2: PCI bridge to [bus 09-09] [ 4.592073] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 4.592080] pci 0000:00:1c.2: bridge window [mem 0xf3a00000-0xf3afffff] [ 4.592089] pci 0000:00:1c.2: bridge window [mem 0xf3900000-0xf39fffff 64bit pref] [ 4.592155] pci 0000:0a:00.0: [10ec:8168] type 0 class 0x000200 [ 4.592174] pci 0000:0a:00.0: reg 10: [io 0x5e00-0x5eff] [ 4.592203] pci 0000:0a:00.0: reg 18: [mem 0xf38ff000-0xf38fffff 64bit] [ 4.592224] pci 0000:0a:00.0: reg 20: [mem 0xf37f0000-0xf37fffff 64bit pref] [ 4.592238] pci 0000:0a:00.0: reg 30: [mem 0xf38c0000-0xf38dffff pref] [ 4.592282] pci 0000:0a:00.0: supports D1 D2 [ 4.592283] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.592291] pci 0000:0a:00.0: PME# disabled [ 4.592320] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 4.592327] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] [ 4.592334] pci 0000:00:1c.4: bridge window [mem 0xf3800000-0xf38fffff] [ 4.592343] pci 0000:00:1c.4: bridge window [mem 0xf3700000-0xf37fffff 64bit pref] [ 4.592387] pci 0000:0b:03.0: [104c:8023] type 0 class 0x000c00 [ 4.592403] pci 0000:0b:03.0: reg 10: [mem 0xf34ff000-0xf34ff7ff] [ 4.592416] pci 0000:0b:03.0: reg 14: [mem 0xf34f8000-0xf34fbfff] [ 4.592475] pci 0000:0b:03.0: supports D1 D2 [ 4.592476] pci 0000:0b:03.0: PME# supported from D0 D1 D2 D3hot [ 4.592484] pci 0000:0b:03.0: PME# disabled [ 4.592524] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) [ 4.592531] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4.592539] pci 0000:00:1e.0: bridge window [mem 0xf3400000-0xf34fffff] [ 4.592548] pci 0000:00:1e.0: bridge window [mem 0xf3300000-0xf33fffff 64bit pref] [ 4.592549] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 4.592551] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 4.592553] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 4.592555] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 4.592556] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode) [ 4.592593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.592769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP1._PRT] [ 4.592803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP3._PRT] [ 4.592838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP7._PRT] [ 4.592881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 4.592916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 4.592950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 4.592977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 4.593005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 4.605001] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11 12 14 15) [ 4.605055] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11 12 14 15) [ 4.605107] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11 12 14 15) [ 4.605159] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11 12 14 15) [ 4.605211] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 10 11 12 14 15) *0, disabled. [ 4.605263] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 9 10 11 12 14 15) [ 4.605310] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 9 10 *11 12 14 15) [ 4.605360] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 *10 11 12 14 15) [ 4.605389] HEST: Table is not found! [ 4.605446] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 4.605450] vgaarb: loaded [ 4.605568] SCSI subsystem initialized [ 4.605610] libata version 3.00 loaded. [ 4.605640] usbcore: registered new interface driver usbfs [ 4.605647] usbcore: registered new interface driver hub [ 4.605666] usbcore: registered new device driver usb [ 4.605787] wmi: Mapper loaded [ 4.605788] PCI: Using ACPI for IRQ routing [ 4.605790] PCI: pci_cache_line_size set to 64 bytes [ 4.605978] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 4.605980] reserve RAM buffer: 000000009f790000 - 000000009fffffff [ 4.606048] NetLabel: Initializing [ 4.606049] NetLabel: domain hash size = 128 [ 4.606050] NetLabel: protocols = UNLABELED CIPSOv4 [ 4.606059] NetLabel: unlabeled traffic allowed by default [ 4.606177] hpet clockevent registered [ 4.606185] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 4.606193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 4.606196] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 4.657886] Switching to clocksource tsc [ 4.662194] AppArmor: AppArmor Filesystem Enabled [ 4.662201] pnp: PnP ACPI init [ 4.662210] ACPI: bus type pnp registered [ 4.662302] pnp 00:00: [bus 00-ff] [ 4.662304] pnp 00:00: [io 0x0cf8-0x0cff] [ 4.662306] pnp 00:00: [io 0x0000-0x0cf7 window] [ 4.662307] pnp 00:00: [io 0x0d00-0xffff window] [ 4.662309] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 4.662311] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 4.662312] pnp 00:00: [mem 0xa0000000-0xfebfffff window] [ 4.662352] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 4.662467] pnp 00:01: [io 0x0010-0x001f] [ 4.662469] pnp 00:01: [io 0x0022-0x003f] [ 4.662470] pnp 00:01: [io 0x0044-0x005f] [ 4.662471] pnp 00:01: [io 0x0062-0x0063] [ 4.662472] pnp 00:01: [io 0x0065-0x006f] [ 4.662474] pnp 00:01: [io 0x0074-0x007f] [ 4.662475] pnp 00:01: [io 0x0091-0x0093] [ 4.662476] pnp 00:01: [io 0x00a2-0x00bf] [ 4.662479] pnp 00:01: [io 0x00e0-0x00ef] [ 4.662480] pnp 00:01: [io 0x04d0-0x04d1] [ 4.662482] pnp 00:01: [io 0x0800-0x0805] [ 4.662483] pnp 00:01: [io 0x0880-0x088f] [ 4.662537] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.662546] pnp 00:02: [dma 4] [ 4.662547] pnp 00:02: [io 0x0000-0x000f] [ 4.662549] pnp 00:02: [io 0x0080-0x0090] [ 4.662550] pnp 00:02: [io 0x0094-0x009f] [ 4.662551] pnp 00:02: [io 0x00c0-0x00df] [ 4.662577] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 4.662585] pnp 00:03: [io 0x0070-0x0073] [ 4.662596] pnp 00:03: [irq 8] [ 4.662620] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 4.662626] pnp 00:04: [io 0x0061] [ 4.662652] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 4.662658] pnp 00:05: [io 0x00f0-0x00ff] [ 4.662666] pnp 00:05: [irq 13] [ 4.662692] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 4.663014] pnp 00:06: [io 0x0060] [ 4.663015] pnp 00:06: [io 0x0064] [ 4.663023] pnp 00:06: [irq 1] [ 4.663050] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 4.663068] pnp 00:07: [io 0x0400-0x04bf] [ 4.663110] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.663127] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 4.663154] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 4.663336] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 4.663387] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.663490] pnp 00:0a: [mem 0x000f0000-0x000fffff] [ 4.663492] pnp 00:0a: [mem 0x9f800000-0x9fffffff] [ 4.663493] pnp 00:0a: [mem 0x9f790000-0x9f7fffff] [ 4.663494] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 4.663496] pnp 00:0a: [mem 0x00100000-0x9f78ffff] [ 4.663497] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 4.663499] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 4.663500] pnp 00:0a: [mem 0xfed13000-0xfed1ffff] [ 4.663502] pnp 00:0a: [mem 0xfed20000-0xfed9ffff] [ 4.663503] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 4.663505] pnp 00:0a: [mem 0xffb00000-0xffb7ffff] [ 4.663506] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 4.663507] pnp 00:0a: [mem 0x000e0000-0x000effff] [ 4.663573] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 4.663580] pnp: PnP ACPI: found 11 devices [ 4.663581] ACPI: ACPI bus type pnp unregistered [ 4.663587] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 4.663589] system 00:01: [io 0x0800-0x0805] has been reserved [ 4.663591] system 00:01: [io 0x0880-0x088f] has been reserved [ 4.663595] system 00:07: [io 0x0400-0x04bf] could not be reserved [ 4.663599] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 4.663602] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved [ 4.663604] system 00:0a: [mem 0x9f800000-0x9fffffff] has been reserved [ 4.663606] system 00:0a: [mem 0x9f790000-0x9f7fffff] could not be reserved [ 4.663608] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 4.663610] system 00:0a: [mem 0x00100000-0x9f78ffff] could not be reserved [ 4.663612] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 4.663613] system 00:0a: [mem 0xfed13000-0xfed1ffff] has been reserved [ 4.663615] system 00:0a: [mem 0xfed20000-0xfed9ffff] has been reserved [ 4.663617] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 4.663619] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved [ 4.663621] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved [ 4.663622] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved [ 4.669307] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 4.669310] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 4.669313] pci 0000:00:01.0: bridge window [mem 0xf3200000-0xf32fffff] [ 4.669317] pci 0000:00:01.0: bridge window [mem 0xf3100000-0xf31fffff 64bit pref] [ 4.669321] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 4.669323] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 4.669327] pci 0000:00:03.0: bridge window [mem 0xdc000000-0xdfffffff] [ 4.669330] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.669334] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 4.669336] pci 0000:04:00.0: bridge window [io 0xb000-0xbfff] [ 4.669340] pci 0000:04:00.0: bridge window [mem 0xf3000000-0xf30fffff] [ 4.669343] pci 0000:04:00.0: bridge window [mem 0xf3600000-0xf36fffff 64bit pref] [ 4.669347] pci 0000:04:02.0: PCI bridge to [bus 06-06] [ 4.669349] pci 0000:04:02.0: bridge window [io 0xa000-0xafff] [ 4.669353] pci 0000:04:02.0: bridge window [mem 0xf2f00000-0xf2ffffff] [ 4.669356] pci 0000:04:02.0: bridge window [mem 0xf3500000-0xf35fffff 64bit pref] [ 4.669360] pci 0000:03:00.0: PCI bridge to [bus 04-06] [ 4.669362] pci 0000:03:00.0: bridge window [io 0xa000-0xbfff] [ 4.669365] pci 0000:03:00.0: bridge window [mem 0xf2f00000-0xf30fffff] [ 4.669368] pci 0000:03:00.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref] [ 4.669373] pci 0000:00:07.0: PCI bridge to [bus 03-06] [ 4.669375] pci 0000:00:07.0: bridge window [io 0xa000-0xbfff] [ 4.669378] pci 0000:00:07.0: bridge window [mem 0xf2f00000-0xf30fffff] [ 4.669381] pci 0000:00:07.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref] [ 4.669386] pci 0000:00:1c.0: PCI bridge to [bus 07-07] [ 4.669388] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff] [ 4.669396] pci 0000:00:1c.0: bridge window [mem 0xf3e00000-0xf3efffff] [ 4.669403] pci 0000:00:1c.0: bridge window [mem 0xf3d00000-0xf3dfffff 64bit pref] [ 4.669412] pci 0000:00:1c.1: PCI bridge to [bus 08-08] [ 4.669418] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 4.669426] pci 0000:00:1c.1: bridge window [mem 0xf3c00000-0xf3cfffff] [ 4.669434] pci 0000:00:1c.1: bridge window [mem 0xf3b00000-0xf3bfffff 64bit pref] [ 4.669443] pci 0000:00:1c.2: PCI bridge to [bus 09-09] [ 4.669449] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 4.669457] pci 0000:00:1c.2: bridge window [mem 0xf3a00000-0xf3afffff] [ 4.669464] pci 0000:00:1c.2: bridge window [mem 0xf3900000-0xf39fffff 64bit pref] [ 4.669473] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 4.669479] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] [ 4.669487] pci 0000:00:1c.4: bridge window [mem 0xf3800000-0xf38fffff] [ 4.669495] pci 0000:00:1c.4: bridge window [mem 0xf3700000-0xf37fffff 64bit pref] [ 4.669504] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] [ 4.669510] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4.669518] pci 0000:00:1e.0: bridge window [mem 0xf3400000-0xf34fffff] [ 4.669525] pci 0000:00:1e.0: bridge window [mem 0xf3300000-0xf33fffff 64bit pref] [ 4.669541] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.669544] pci 0000:00:01.0: setting latency timer to 64 [ 4.669549] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.669552] pci 0000:00:03.0: setting latency timer to 64 [ 4.669556] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.669559] pci 0000:00:07.0: setting latency timer to 64 [ 4.669564] pci 0000:03:00.0: setting latency timer to 64 [ 4.669568] pci 0000:04:00.0: setting latency timer to 64 [ 4.669573] pci 0000:04:02.0: setting latency timer to 64 [ 4.669582] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.669589] pci 0000:00:1c.0: setting latency timer to 64 [ 4.669602] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.669607] pci 0000:00:1c.1: setting latency timer to 64 [ 4.669622] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.669627] pci 0000:00:1c.2: setting latency timer to 64 [ 4.669636] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.669643] pci 0000:00:1c.4: setting latency timer to 64 [ 4.669656] pci 0000:00:1e.0: setting latency timer to 64 [ 4.669663] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 4.669665] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 4.669666] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 4.669668] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 4.669670] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xfebfffff] [ 4.669671] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 4.669673] pci_bus 0000:01: resource 1 [mem 0xf3200000-0xf32fffff] [ 4.669675] pci_bus 0000:01: resource 2 [mem 0xf3100000-0xf31fffff 64bit pref] [ 4.669676] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 4.669678] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff] [ 4.669679] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.669681] pci_bus 0000:03: resource 0 [io 0xa000-0xbfff] [ 4.669683] pci_bus 0000:03: resource 1 [mem 0xf2f00000-0xf30fffff] [ 4.669684] pci_bus 0000:03: resource 2 [mem 0xf3500000-0xf36fffff 64bit pref] [ 4.669686] pci_bus 0000:04: resource 0 [io 0xa000-0xbfff] [ 4.669688] pci_bus 0000:04: resource 1 [mem 0xf2f00000-0xf30fffff] [ 4.669689] pci_bus 0000:04: resource 2 [mem 0xf3500000-0xf36fffff 64bit pref] [ 4.669691] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 4.669692] pci_bus 0000:05: resource 1 [mem 0xf3000000-0xf30fffff] [ 4.669694] pci_bus 0000:05: resource 2 [mem 0xf3600000-0xf36fffff 64bit pref] [ 4.669696] pci_bus 0000:06: resource 0 [io 0xa000-0xafff] [ 4.669697] pci_bus 0000:06: resource 1 [mem 0xf2f00000-0xf2ffffff] [ 4.669699] pci_bus 0000:06: resource 2 [mem 0xf3500000-0xf35fffff 64bit pref] [ 4.669701] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff] [ 4.669702] pci_bus 0000:07: resource 1 [mem 0xf3e00000-0xf3efffff] [ 4.669704] pci_bus 0000:07: resource 2 [mem 0xf3d00000-0xf3dfffff 64bit pref] [ 4.669706] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff] [ 4.669707] pci_bus 0000:08: resource 1 [mem 0xf3c00000-0xf3cfffff] [ 4.669709] pci_bus 0000:08: resource 2 [mem 0xf3b00000-0xf3bfffff 64bit pref] [ 4.669711] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff] [ 4.669712] pci_bus 0000:09: resource 1 [mem 0xf3a00000-0xf3afffff] [ 4.669714] pci_bus 0000:09: resource 2 [mem 0xf3900000-0xf39fffff 64bit pref] [ 4.669715] pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff] [ 4.669717] pci_bus 0000:0a: resource 1 [mem 0xf3800000-0xf38fffff] [ 4.669719] pci_bus 0000:0a: resource 2 [mem 0xf3700000-0xf37fffff 64bit pref] [ 4.669720] pci_bus 0000:0b: resource 0 [io 0x9000-0x9fff] [ 4.669722] pci_bus 0000:0b: resource 1 [mem 0xf3400000-0xf34fffff] [ 4.669724] pci_bus 0000:0b: resource 2 [mem 0xf3300000-0xf33fffff 64bit pref] [ 4.669725] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 4.669727] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 4.669728] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 4.669730] pci_bus 0000:0b: resource 7 [mem 0x000c0000-0x000dffff] [ 4.669732] pci_bus 0000:0b: resource 8 [mem 0xa0000000-0xfebfffff] [ 4.669754] NET: Registered protocol family 2 [ 4.669936] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 4.670805] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 4.671997] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.672127] TCP: Hash tables configured (established 524288 bind 65536) [ 4.672129] TCP reno registered [ 4.672143] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 4.672174] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 4.672263] NET: Registered protocol family 1 [ 4.672533] pci 0000:02:00.0: Boot video device [ 4.672593] PCI: CLS 64 bytes, default 64 [ 4.672595] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.672597] Placing 64MB software IO TLB between ffff88009b400000 - ffff88009f400000 [ 4.672598] software IO TLB at phys 0x9b400000 - 0x9f400000 [ 4.672949] Scanning for low memory corruption every 60 seconds [ 4.673034] audit: initializing netlink socket (disabled) [ 4.673041] type=2000 audit(1294086957.760:1): initialized [ 4.683659] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.684950] VFS: Disk quotas dquot_6.5.2 [ 4.684992] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.685442] fuse init (API version 7.15) [ 4.685504] msgmni has been set to 11941 [ 4.685644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.685646] io scheduler noop registered [ 4.685647] io scheduler deadline registered [ 4.685675] io scheduler cfq registered (default) [ 4.685816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.685832] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 4.685892] intel_idle: MWAIT substates: 0x1120 [ 4.685893] intel_idle: v0.4 model 0x1A [ 4.685894] intel_idle: lapic_timer_reliable_states 0x2 [ 4.685978] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 4.685981] ACPI: Power Button [PWRB] [ 4.686019] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 4.686021] ACPI: Power Button [PWRF] [ 4.686059] ACPI: Fan [FAN] (on) [ 4.686215] ACPI: acpi_idle yielding to intel_idle [ 4.687760] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.687762] ACPI: Thermal Zone [THRM] (33 C) [ 4.687800] ERST: Table is not found! [ 4.687874] Linux agpgart interface v0.103 [ 4.687908] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.247941] brd: module loaded [ 5.248290] loop: module loaded [ 5.248421] pata_acpi 0000:07:00.1: enabling device (0000 -> 0001) [ 5.248431] pata_acpi 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.248456] pata_acpi 0000:07:00.1: setting latency timer to 64 [ 5.248473] pata_acpi 0000:07:00.1: PCI INT B disabled [ 5.248490] pata_acpi 0000:08:00.1: enabling device (0000 -> 0001) [ 5.248498] pata_acpi 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 5.248516] pata_acpi 0000:08:00.1: setting latency timer to 64 [ 5.248531] pata_acpi 0000:08:00.1: PCI INT B disabled [ 5.248720] Fixed MDIO Bus: probed [ 5.248738] PPP generic driver version 2.4.2 [ 5.248763] tun: Universal TUN/TAP device driver, 1.6 [ 5.248765] tun: (C) 1999-2004 Max Krasnyansky [ 5.248813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.248831] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.248849] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 5.248856] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 5.248880] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 5.248921] ehci_hcd 0000:00:1a.7: debug port 1 [ 5.252817] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 5.252832] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3ffe000 [ 5.276407] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.276487] hub 1-0:1.0: USB hub found [ 5.276490] hub 1-0:1.0: 6 ports detected [ 5.276560] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.276576] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.276582] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.276614] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.276654] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.280555] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 5.280569] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3ffd000 [ 5.296364] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.296434] hub 2-0:1.0: USB hub found [ 5.296436] hub 2-0:1.0: 6 ports detected [ 5.296495] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.296504] uhci_hcd: USB Universal Host Controller Interface driver [ 5.296540] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.296549] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.296555] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.296579] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.296630] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 5.296716] hub 3-0:1.0: USB hub found [ 5.296719] hub 3-0:1.0: 2 ports detected [ 5.296779] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5.296784] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 5.296790] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.296815] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.296867] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 5.296954] hub 4-0:1.0: USB hub found [ 5.296957] hub 4-0:1.0: 2 ports detected [ 5.297016] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.297025] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 5.297031] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.297060] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.297111] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00 [ 5.297200] hub 5-0:1.0: USB hub found [ 5.297202] hub 5-0:1.0: 2 ports detected [ 5.297255] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.297263] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.297270] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.297295] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.297334] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 5.297419] hub 6-0:1.0: USB hub found [ 5.297422] hub 6-0:1.0: 2 ports detected [ 5.297477] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.297486] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.297492] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.297517] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.297557] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 5.297643] hub 7-0:1.0: USB hub found [ 5.297646] hub 7-0:1.0: 2 ports detected [ 5.297701] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.297709] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.297715] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.297739] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 5.297774] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 5.297860] hub 8-0:1.0: USB hub found [ 5.297863] hub 8-0:1.0: 2 ports detected [ 5.297941] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.297943] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.298496] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.298546] mice: PS/2 mouse device common for all mice [ 5.298622] rtc_cmos 00:03: RTC can wake from S4 [ 5.298662] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 5.298696] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 5.298766] device-mapper: uevent: version 1.0.3 [ 5.298838] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 5.298871] device-mapper: multipath: version 1.1.1 loaded [ 5.298873] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.299084] cpuidle: using governor ladder [ 5.299292] cpuidle: using governor menu [ 5.299463] TCP cubic registered [ 5.299546] NET: Registered protocol family 10 [ 5.299772] lo: Disabled Privacy Extensions [ 5.299905] NET: Registered protocol family 17 [ 5.299916] Registering the dns_resolver key type [ 5.301799] PM: Hibernation image not present or could not be loaded. [ 5.301806] registered taskstats version 1 [ 5.302267] Magic number: 11:344:598 [ 5.302407] rtc_cmos 00:03: setting system clock to 2011-01-03 20:35:59 UTC (1294086959) [ 5.302411] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.302413] EDD information not available. [ 5.302477] Freeing unused kernel memory: 920k freed [ 5.302603] Write protecting the kernel read-only data: 10240k [ 5.303609] Freeing unused kernel memory: 220k freed [ 5.308562] Freeing unused kernel memory: 1524k freed [ 5.326682] udev[94]: starting version 164 [ 5.349669] pata_jmicron 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.349703] pata_jmicron 0000:07:00.1: setting latency timer to 64 [ 5.350458] scsi0 : pata_jmicron [ 5.351015] scsi1 : pata_jmicron [ 5.351553] ata1: PATA max UDMA/100 cmd 0x8f00 ctl 0x8e00 bmdma 0x8b00 irq 17 [ 5.351556] ata2: PATA max UDMA/100 cmd 0x8d00 ctl 0x8c00 bmdma 0x8b08 irq 17 [ 5.351586] pata_jmicron 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 5.351625] pata_jmicron 0000:08:00.1: setting latency timer to 64 [ 5.351952] scsi2 : pata_jmicron [ 5.352011] scsi3 : pata_jmicron [ 5.352548] ata3: PATA max UDMA/100 cmd 0x7f00 ctl 0x7e00 bmdma 0x7b00 irq 18 [ 5.352551] ata4: PATA max UDMA/100 cmd 0x7d00 ctl 0x7c00 bmdma 0x7b08 irq 18 [ 5.359062] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.359084] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.359136] r8169 0000:09:00.0: setting latency timer to 64 [ 5.359200] r8169 0000:09:00.0: irq 40 for MSI/MSI-X [ 5.359676] r8169 0000:09:00.0: eth0: RTL8168c/8111c at 0xffffc9000186c000, 00:1f:bc:01:17:08, XID 1c4000c0 IRQ 40 [ 5.376336] [drm] Initialized drm 1.1.0 20060810 [ 5.386182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.386205] r8169 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.386315] r8169 0000:0a:00.0: setting latency timer to 64 [ 5.386369] r8169 0000:0a:00.0: irq 41 for MSI/MSI-X [ 5.386712] r8169 0000:0a:00.0: eth1: RTL8168c/8111c at 0xffffc90001782000, 00:1f:bc:01:17:09, XID 1c4000c0 IRQ 41 [ 5.409078] ahci 0000:00:1f.2: version 3.0 [ 5.409093] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5.409154] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 5.409183] ahci: SSS flag set, parallel bus scan disabled [ 5.409226] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 5.409229] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems [ 5.409236] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.506651] scsi4 : ahci [ 5.506943] scsi5 : ahci [ 5.507175] scsi6 : ahci [ 5.507367] scsi7 : ahci [ 5.507558] scsi8 : ahci [ 5.507745] scsi9 : ahci [ 5.507923] ata5: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc100 irq 42 [ 5.507930] ata6: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc180 irq 42 [ 5.507936] ata7: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc200 irq 42 [ 5.507942] ata8: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc280 irq 42 [ 5.507949] ata9: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc300 irq 42 [ 5.507955] ata10: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc380 irq 42 [ 5.507984] ahci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.525959] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 5.525962] ahci 0000:07:00.0: flags: 64bit ncq led clo pmp pio [ 5.525971] ahci 0000:07:00.0: setting latency timer to 64 [ 5.526258] scsi10 : ahci [ 5.526377] scsi11 : ahci [ 5.526451] ata11: SATA max UDMA/133 abar m8192@0xf3efe000 port 0xf3efe100 irq 16 [ 5.526458] ata12: SATA max UDMA/133 abar m8192@0xf3efe000 port 0xf3efe180 irq 16 [ 5.526479] ahci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.545831] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 5.545836] ahci 0000:08:00.0: flags: 64bit ncq led clo pmp pio [ 5.545845] ahci 0000:08:00.0: setting latency timer to 64 [ 5.546162] scsi12 : ahci [ 5.546278] scsi13 : ahci [ 5.546355] ata13: SATA max UDMA/133 abar m8192@0xf3cfe000 port 0xf3cfe100 irq 17 [ 5.546362] ata14: SATA max UDMA/133 abar m8192@0xf3cfe000 port 0xf3cfe180 irq 17 [ 5.595717] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 5.747528] hub 1-4:1.0: USB hub found [ 5.747900] hub 1-4:1.0: 4 ports detected [ 5.855099] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.858402] ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 [ 5.858406] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.862501] ata5.00: configured for UDMA/133 [ 5.862654] scsi 4:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 [ 5.862813] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 5.862889] sd 4:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB) [ 5.862990] sd 4:0:0:0: [sda] Write Protect is off [ 5.862995] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.863053] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.865085] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 5.875144] ata11: SATA link down (SStatus 0 SControl 300) [ 5.879354] sda: sda1 sda2 sda3 sda4 [ 5.879778] sd 4:0:0:0: [sda] Attached SCSI disk [ 5.885067] ata12: SATA link down (SStatus 0 SControl 300) [ 5.895063] ata14: SATA link down (SStatus 0 SControl 300) [ 5.895108] ata13: SATA link down (SStatus 0 SControl 300) [ 6.027449] usb 1-5: selecting invalid altsetting 1 [ 6.027465] usbcore: registered new interface driver uas [ 6.463666] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 6.603292] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.606601] ata6.00: ATA-8: WDC WD1500HLFS-01G6U0, 04.04V01, max UDMA/133 [ 6.606605] ata6.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 6.610129] ata6.00: configured for UDMA/133 [ 6.610288] scsi 5:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5 [ 6.610415] sd 5:0:0:0: [sdb] 293046768 512-byte logical blocks: (150 GB/139 GiB) [ 6.610437] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 6.610467] sd 5:0:0:0: [sdb] Write Protect is off [ 6.610470] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.610492] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.617237] sdb: sdb1 [ 6.617554] sd 5:0:0:0: [sdb] Attached SCSI disk [ 6.746412] usbcore: registered new interface driver usbhid [ 6.746414] usbhid: USB HID core driver [ 7.361466] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.363471] ata7.00: ATAPI: PIONEER DVD-RW DVR-217, 1.01, max UDMA/66 [ 7.365849] ata7.00: configured for UDMA/66 [ 7.397538] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-217 1.01 PQ: 0 ANSI: 5 [ 7.398736] sr0: scsi3-mmc drive: 102x/102x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.398740] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.398874] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 7.398936] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 8.139587] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.140614] ata8.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133 [ 8.140619] ata8.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 8.141800] ata8.00: configured for UDMA/133 [ 8.141920] scsi 7:0:0:0: Direct-Access ATA WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5 [ 8.142086] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 8.142117] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 8.142138] sd 7:0:0:0: [sdc] Write Protect is off [ 8.142141] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 8.142164] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.190418] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 > [ 8.190420] sdc3: [ 8.190954] sd 7:0:0:0: [sdc] Attached SCSI disk [ 8.488784] ata9: SATA link down (SStatus 0 SControl 300) [ 8.837954] ata10: SATA link down (SStatus 0 SControl 300) [ 8.842717] firewire_ohci 0000:0b:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8.842722] firewire_ohci 0000:0b:03.0: setting latency timer to 64 [ 8.844906] Initializing USB Mass Storage driver... [ 8.845057] scsi14 : usb-storage 1-5:1.0 [ 8.845202] usbcore: registered new interface driver usb-storage [ 8.845204] USB Mass Storage support registered. [ 8.868437] nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.868442] nouveau 0000:02:00.0: setting latency timer to 64 [ 8.870519] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x092a80a2) [ 8.873826] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 8.897811] firewire_ohci: Added fw-ohci device 0000:0b:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 8.960026] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 8.960028] [drm] nouveau 0000:02:00.0: BIT BIOS found [ 8.960030] [drm] nouveau 0000:02:00.0: Bios version 62.92.79.00 [ 8.960032] [drm] nouveau 0000:02:00.0: TMDS table version 2.0 [ 8.960033] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 [ 8.960035] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028 [ 8.960037] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030 [ 8.960038] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028 [ 8.960040] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030 [ 8.960041] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c0c080 [ 8.960043] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4 [ 8.960045] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 8.960047] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 8.960049] [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 8.960051] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 8.960052] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 8.960055] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC5E1 [ 8.997580] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2 [ 8.997647] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-2/input0 [ 9.026355] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 9.026706] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3 [ 9.026805] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-2/input1 [ 9.037449] CE: hpet increased min_delta_ns to 7500 nsec [ 9.067500] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xCB89 [ 9.107281] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD95A [ 9.107293] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xDA58 [ 9.137310] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDCC0 [ 9.137312] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDD25 [ 9.177116] [drm] nouveau 0000:02:00.0: 0xDD25: Condition still not met after 20ms, skipping following opcodes [ 9.196178] [drm] nouveau 0000:02:00.0: 1 available performance level(s) [ 9.196181] [drm] nouveau 0000:02:00.0: 3: memory 1100MHz core 738MHz shader 1833MHz voltage 1200mV fanspeed 100% [ 9.196200] [drm] nouveau 0000:02:00.0: c: memory 499MHz core 399MHz shader 810MHz voltage 950mV [ 9.196227] [drm] nouveau 0000:02:00.0: Detected 512MiB VRAM [ 9.196410] [TTM] Zone kernel: Available graphics memory: 3058360 kiB. [ 9.196414] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 9.196416] [TTM] Initializing pool allocator. [ 9.280729] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) [ 9.283158] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown [ 9.283160] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing [ 9.304495] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [ 9.322131] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 9.396594] firewire_core: created device fw0: GUID 696100006e566964, S400 [ 9.483554] [drm] nouveau 0000:02:00.0: allocated 2560x1600 fb: 0x40280000, bo ffff8801d231d000 [ 9.489408] Console: switching to colour frame buffer device 320x100 [ 9.494523] fb0: nouveaufb frame buffer device [ 9.494525] drm: registered panic notifier [ 9.494533] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0 [ 9.709579] Btrfs loaded [ 9.775747] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.790259] EXT3-fs: barriers not enabled [ 9.799395] kjournald starting. Commit interval 5 seconds [ 9.799407] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 9.847799] scsi 14:0:0:0: Direct-Access WDC WD25 00JS-00NCB1 10.0 PQ: 0 ANSI: 4 [ 9.849164] scsi 14:0:0:1: Direct-Access WDC WD25 00JS-00NCB1 10.0 PQ: 0 ANSI: 4 [ 9.849701] sd 14:0:0:0: Attached scsi generic sg4 type 0 [ 9.849811] sd 14:0:0:1: Attached scsi generic sg5 type 0 [ 9.852337] sd 14:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 9.853266] sd 14:0:0:1: [sde] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 9.854527] sd 14:0:0:0: [sdd] Write Protect is off [ 9.854529] sd 14:0:0:0: [sdd] Mode Sense: 10 00 00 00 [ 9.854531] sd 14:0:0:0: [sdd] Assuming drive cache: write through [ 9.855739] sd 14:0:0:1: [sde] Write Protect is off [ 9.855745] sd 14:0:0:1: [sde] Mode Sense: 10 00 00 00 [ 9.855749] sd 14:0:0:1: [sde] Assuming drive cache: write through [ 9.860392] sd 14:0:0:0: [sdd] Assuming drive cache: write through [ 9.861608] sd 14:0:0:1: [sde] Assuming drive cache: write through [ 9.865113] sdd: sdd1 < sdd5 > [ 9.866117] sde: sde1 < sde5 > [ 9.871004] sd 14:0:0:0: [sdd] Assuming drive cache: write through [ 9.871009] sd 14:0:0:0: [sdd] Attached SCSI disk [ 9.871949] sd 14:0:0:1: [sde] Assuming drive cache: write through [ 9.871955] sd 14:0:0:1: [sde] Attached SCSI disk [ 10.730993] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 13.038334] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 13.093374] ISO 9660 Extensions: RRIP_1991A [ 13.361647] aufs 2.1-standalone.tree-37-rcN-20101122 [ 13.452572] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 60.602192] Adding 996024k swap on /dev/sda3. Priority:-1 extents:1 across:996024k [ 63.690445] udev[1528]: starting version 164 [ 68.259187] EDAC MC: Ver: 2.1.0 Dec 1 2010 [ 68.347013] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 68.713998] EDAC i7core: Driver loaded. [ 71.839752] r8169 0000:09:00.0: eth0: link up [ 71.839762] r8169 0000:09:00.0: eth0: link up [ 71.842327] r8169 0000:0a:00.0: eth1: link down [ 71.842869] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 73.473289] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 73.473399] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 73.473427] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 74.607858] hda_codec: ALC889: BIOS auto-probing. [ 74.617500] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 77.045747] lp: driver loaded but no devices found [ 77.653728] ppdev: user-space parallel port driver [ 88.131095] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [ 88.148801] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 282.338599] usb 1-4.4: new full speed USB device using ehci_hcd and address 5 [ 282.458152] input: GN Netcom GN 2000 USB OC as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.3/input/input5 [ 282.458277] generic-usb 0003:0B0E:2007.0003: input,hiddev0,hidraw2: USB HID v1.00 Device [GN Netcom GN 2000 USB OC] on usb-0000:00:1a.7-4.4/input3 [ 283.121136] usbcore: registered new interface driver snd-usb-audio [ 283.284424] cannot submit datapipe for urb 0, error -28: not enough bandwidth [ 285.919958] usb 1-4.1: new high speed USB device using ehci_hcd and address 6 [ 286.640348] Linux video capture interface: v2.00 [ 287.136589] gspca: v2.10.0 registered [ 287.436456] gspca: probing 2770:930b [ 287.437120] sq930x: info: 03 00 12 93 0b f6 cf 00 [ 287.515709] sq930x: Sensor icx098bp [ 287.755216] gspca: video0 created [ 287.755228] usbcore: registered new interface driver sq930x [ 305.450434] JFS: nTxBlock = 8192, nTxLock = 65536 [ 305.820745] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 305.821519] SGI XFS Quota Management subsystem [ 428.034634] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 428.334293] QNX4 filesystem 0.2.3 registered. [ 433.191684] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 433.345964] EXT3-fs: barriers not enabled [ 433.352706] kjournald starting. Commit interval 5 seconds [ 433.352725] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 433.465384] REISERFS (device sda4): found reiserfs format "3.6" with standard journal [ 433.465395] REISERFS (device sda4): using ordered data mode [ 433.468017] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 433.468292] REISERFS (device sda4): checking transaction log (sda4) [ 433.500064] REISERFS (device sda4): Using r5 hash to sort names [ 434.527281] You didn't specify the type of your ufs filesystem [ 434.527282] [ 434.527283] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 434.527284] [ 434.527284] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 434.527650] ufs_read_super: bad magic number [ 434.815354] You didn't specify the type of your ufs filesystem [ 434.815356] [ 434.815356] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 434.815357] [ 434.815357] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 434.815693] ufs_read_super: bad magic number [ 434.927556] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 435.044483] You didn't specify the type of your ufs filesystem [ 435.044484] [ 435.044485] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 435.044486] [ 435.044486] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 435.044743] ufs_read_super: bad magic number [ 435.146225] You didn't specify the type of your ufs filesystem [ 435.146226] [ 435.146227] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 435.146228] [ 435.146228] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 435.146529] ufs_read_super: bad magic number [ 435.206657] You didn't specify the type of your ufs filesystem [ 435.206658] [ 435.206659] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... [ 435.206660] [ 435.206660] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 435.206952] ufs_read_super: bad magic number [ 913.291398] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 1005.900653] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1006.077530] EXT3-fs: barriers not enabled [ 1006.079696] kjournald starting. Commit interval 5 seconds [ 1006.079713] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1006.131033] REISERFS (device sda4): found reiserfs format "3.6" with standard journal [ 1006.131045] REISERFS (device sda4): using ordered data mode [ 1006.135136] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 1006.135438] REISERFS (device sda4): checking transaction log (sda4) [ 1006.167215] REISERFS (device sda4): Using r5 hash to sort names [ 1007.132701] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 1339.806699] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1339.833640] EXT3-fs: barriers not enabled [ 1339.833785] kjournald starting. Commit interval 5 seconds [ 1339.833796] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1340.039639] REISERFS (device sda4): found reiserfs format "3.6" with standard journal [ 1340.039651] REISERFS (device sda4): using ordered data mode [ 1340.039832] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 1340.040129] REISERFS (device sda4): checking transaction log (sda4) [ 1340.040763] REISERFS (device sda4): Using r5 hash to sort names [ 1340.070802] EXT3-fs: barriers not enabled [ 1340.071047] kjournald starting. Commit interval 5 seconds [ 1340.071058] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1340.266015] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 1349.808497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1349.960520] EXT3-fs: barriers not enabled [ 1349.963653] kjournald starting. Commit interval 5 seconds [ 1349.963672] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1350.005372] REISERFS (device sda4): found reiserfs format "3.6" with standard journal [ 1350.005381] REISERFS (device sda4): using ordered data mode [ 1350.013072] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 1350.013359] REISERFS (device sda4): checking transaction log (sda4) [ 1350.051131] REISERFS (device sda4): Using r5 hash to sort names [ 1350.957144] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 1351.301434] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1351.325161] EXT3-fs: barriers not enabled [ 1351.325358] kjournald starting. Commit interval 5 seconds [ 1351.325376] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1352.412337] REISERFS (device sda4): found reiserfs format "3.6" with standard journal [ 1352.412344] REISERFS (device sda4): using ordered data mode [ 1352.412454] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 1352.412698] REISERFS (device sda4): checking transaction log (sda4) [ 1352.413350] REISERFS (device sda4): Using r5 hash to sort names [ 1352.443974] EXT3-fs: barriers not enabled [ 1352.444113] kjournald starting. Commit interval 5 seconds [ 1352.444134] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1354.623960] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)