[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-24-generic (buildd@yellow) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=f934ff44-5adf-4370-b655-8417e0f78586 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f5bd0] f5bd0 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 16000-1c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 1a000-20000 [ 0.000000] RAMDISK: 36fff000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f7c80 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000dfeead40 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000dfee3280 07A51 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: SSDT 00000000dfeeaf80 0030E (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000dfeeb300 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000dfeeb380 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000dfeeae80 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3927 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [1b000 - 1b7ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u524288 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032047 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=f934ff44-5adf-4370-b655-8417e0f78586 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] early_res array is doubled to 128 at [1b800 - 1c7ff] [ 0.000000] Subtract (58 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [0036fff000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d18155] BRK [ 0.000000] #4 [00000f5be0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f5bd0 - 00000f5be0] MP-table mpf [ 0.000000] #6 [000009f000 - 00000f1400] BIOS reserved [ 0.000000] #7 [00000f153c - 00000f5bd0] BIOS reserved [ 0.000000] #8 [00000f1400 - 00000f153c] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 000001a000] PGTABLE [ 0.000000] #12 [000001a000 - 000001b000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d18180 - 0001d19180] BOOTMEM [ 0.000000] #15 [0001d17140 - 0001d17440] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0 [ 0.000000] #19 [0001d17440 - 0001d175c0] BOOTMEM [ 0.000000] #20 [0001d19180 - 0001d31180] BOOTMEM [ 0.000000] #21 [0001d31180 - 0001d34180] BOOTMEM [ 0.000000] #22 [0001d35000 - 0001d36000] BOOTMEM [ 0.000000] #23 [0001d175c0 - 0001d17601] BOOTMEM [ 0.000000] #24 [0001d17640 - 0001d17683] BOOTMEM [ 0.000000] #25 [0001d176c0 - 0001d17928] BOOTMEM [ 0.000000] #26 [0001d17940 - 0001d179a8] BOOTMEM [ 0.000000] #27 [0001d179c0 - 0001d17a28] BOOTMEM [ 0.000000] #28 [0001d17a40 - 0001d17aa8] BOOTMEM [ 0.000000] #29 [0001d17ac0 - 0001d17b28] BOOTMEM [ 0.000000] #30 [0001d17b40 - 0001d17ba8] BOOTMEM [ 0.000000] #31 [0001d17bc0 - 0001d17c28] BOOTMEM [ 0.000000] #32 [0001d17c40 - 0001d17ca8] BOOTMEM [ 0.000000] #33 [0001d17cc0 - 0001d17d28] BOOTMEM [ 0.000000] #34 [0001d17d40 - 0001d17da8] BOOTMEM [ 0.000000] #35 [0001d17dc0 - 0001d17e28] BOOTMEM [ 0.000000] #36 [0001d17e40 - 0001d17e60] BOOTMEM [ 0.000000] #37 [0001d17e80 - 0001d17ea0] BOOTMEM [ 0.000000] #38 [0001d17ec0 - 0001d17f2a] BOOTMEM [ 0.000000] #39 [0001d17f40 - 0001d17faa] BOOTMEM [ 0.000000] #40 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #41 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #42 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #43 [0001f80000 - 0001f9e000] BOOTMEM [ 0.000000] #44 [0001d17fc0 - 0001d17fc8] BOOTMEM [ 0.000000] #45 [0001d34180 - 0001d34188] BOOTMEM [ 0.000000] #46 [0001d341c0 - 0001d341d0] BOOTMEM [ 0.000000] #47 [0001d34200 - 0001d34220] BOOTMEM [ 0.000000] #48 [0001d34240 - 0001d34370] BOOTMEM [ 0.000000] #49 [0001d34380 - 0001d343d0] BOOTMEM [ 0.000000] #50 [0001d34400 - 0001d34450] BOOTMEM [ 0.000000] #51 [0001d36000 - 0001d3e000] BOOTMEM [ 0.000000] #52 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #53 [0001d34480 - 0001d344a0] BOOTMEM [ 0.000000] #54 [0001f9e000 - 0005f9e000] BOOTMEM [ 0.000000] #55 [0001d3e000 - 0001d5e000] BOOTMEM [ 0.000000] #56 [0001d5e000 - 0001d9e000] BOOTMEM [ 0.000000] #57 [000001c800 - 0000024800] BOOTMEM [ 0.000000] Memory: 3971380k/4718592k available (5711k kernel code, 525892k absent, 221320k reserved, 5379k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3013.751 MHz processor. [ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.50 BogoMIPS (lpj=30137510) [ 0.010012] pid_max: default: 32768 minimum: 301 [ 0.010034] Security Framework initialized [ 0.010050] AppArmor: AppArmor initialized [ 0.010051] Yama: becoming mindful. [ 0.010453] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012579] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013573] Mount-cache hash table entries: 256 [ 0.013708] Initializing cgroup subsys ns [ 0.013711] Initializing cgroup subsys cpuacct [ 0.013715] Initializing cgroup subsys memory [ 0.013723] Initializing cgroup subsys devices [ 0.013725] Initializing cgroup subsys freezer [ 0.013727] Initializing cgroup subsys net_cls [ 0.013750] tseg: 00dff00000 [ 0.013751] CPU: Physical Processor ID: 0 [ 0.013753] CPU: Processor Core ID: 0 [ 0.013754] mce: CPU supports 5 MCE banks [ 0.013764] using C1E aware idle routine [ 0.013765] Performance Events: AMD PMU driver. [ 0.013770] ... version: 0 [ 0.013771] ... bit width: 48 [ 0.013772] ... generic registers: 4 [ 0.013774] ... value mask: 0000ffffffffffff [ 0.013775] ... max period: 00007fffffffffff [ 0.013776] ... fixed-purpose events: 0 [ 0.013778] ... event mask: 000000000000000f [ 0.014978] ACPI: Core revision 20100428 [ 0.025233] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.025244] ftrace: allocating 22678 entries in 89 pages [ 0.030085] Setting APIC routing to flat [ 0.030521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.131081] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.140000] Booting Node 0, Processors #1 [ 0.290042] Brought up 2 CPUs [ 0.290045] Total of 2 processors activated (12055.32 BogoMIPS). [ 0.290281] devtmpfs: initialized [ 0.290651] regulator: core version 0.5 [ 0.290683] Time: 4:50:17 Date: 01/17/11 [ 0.290725] NET: Registered protocol family 16 [ 0.290826] node 0 link 0: io port [7000, ffff] [ 0.290829] TOM: 00000000e0000000 aka 3584M [ 0.290831] node 0 link 0: mmio [a0000, bffff] [ 0.290833] node 0 link 0: mmio [e0000000, efffffff] [ 0.290835] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.290837] node 0 link 0: mmio [f0000000, f03fffff] [ 0.290839] TOM2: 0000000120000000 aka 4608M [ 0.290841] bus: [00, 03] on node 0 link 0 [ 0.290843] bus: 00 index 0 [io 0x0000-0xffff] [ 0.290845] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.290846] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff] [ 0.290848] bus: 00 index 3 [mem 0xf4000000-0xffffffff] [ 0.290849] bus: 00 index 4 [mem 0x120000000-0xfcffffffff] [ 0.290855] ACPI: bus type pci registered [ 0.290917] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.290920] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.295595] PCI: Using configuration type 1 for base access [ 0.296145] Trying to unpack rootfs image as initramfs... [ 0.296145] bio: create slab at 0 [ 0.296145] ACPI: EC: Look up EC in DSDT [ 0.305208] ACPI: Interpreter enabled [ 0.305211] ACPI: (supports S0 S1 S3 S4 S5) [ 0.305231] ACPI: Using IOAPIC for interrupt routing [ 0.313727] ACPI: No dock devices found. [ 0.313730] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.313819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.313990] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.313992] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.313994] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.313996] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.313998] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff] (ignored) [ 0.314162] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.314171] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.314175] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f] [ 0.314193] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.314197] pci 0000:00:01.1: PME# disabled [ 0.314216] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.314232] pci 0000:00:02.0: supports D1 D2 [ 0.314234] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314236] pci 0000:00:02.0: PME# disabled [ 0.314252] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.314268] pci 0000:00:02.1: supports D1 D2 [ 0.314270] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314272] pci 0000:00:02.1: PME# disabled [ 0.314292] pci 0000:00:04.0: reg 20: [io 0xf000-0xf00f] [ 0.314314] pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7] [ 0.314317] pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.314320] pci 0000:00:05.0: reg 18: [io 0x0970-0x0977] [ 0.314322] pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73] [ 0.314325] pci 0000:00:05.0: reg 20: [io 0xdc00-0xdc0f] [ 0.314328] pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff] [ 0.314351] pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7] [ 0.314354] pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3] [ 0.314357] pci 0000:00:05.1: reg 18: [io 0x0960-0x0967] [ 0.314359] pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63] [ 0.314362] pci 0000:00:05.1: reg 20: [io 0xc800-0xc80f] [ 0.314365] pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff] [ 0.314388] pci 0000:00:05.2: reg 10: [io 0xc400-0xc407] [ 0.314390] pci 0000:00:05.2: reg 14: [io 0xc000-0xc003] [ 0.314393] pci 0000:00:05.2: reg 18: [io 0xbc00-0xbc07] [ 0.314396] pci 0000:00:05.2: reg 1c: [io 0xb800-0xb803] [ 0.314399] pci 0000:00:05.2: reg 20: [io 0xb400-0xb40f] [ 0.314402] pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff] [ 0.314447] pci 0000:00:06.1: reg 10: [mem 0xfe020000-0xfe023fff] [ 0.314466] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.314468] pci 0000:00:06.1: PME# disabled [ 0.314493] pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.314496] pci 0000:00:08.0: reg 14: [io 0xb000-0xb007] [ 0.314499] pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff] [ 0.314502] pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f] [ 0.314519] pci 0000:00:08.0: supports D1 D2 [ 0.314520] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314524] pci 0000:00:08.0: PME# disabled [ 0.314547] pci 0000:00:09.0: reg 10: [mem 0xfe027000-0xfe027fff] [ 0.314549] pci 0000:00:09.0: reg 14: [io 0xac00-0xac07] [ 0.314552] pci 0000:00:09.0: reg 18: [mem 0xfe026000-0xfe0260ff] [ 0.314555] pci 0000:00:09.0: reg 1c: [mem 0xfe025000-0xfe02500f] [ 0.314572] pci 0000:00:09.0: supports D1 D2 [ 0.314574] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314578] pci 0000:00:09.0: PME# disabled [ 0.314605] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314607] pci 0000:00:0e.0: PME# disabled [ 0.314631] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314633] pci 0000:00:0f.0: PME# disabled [ 0.314693] PCI: peer root bus 00 res updated from pci conf [ 0.314718] pci 0000:01:07.0: reg 10: [mem 0xfdeff000-0xfdefffff pref] [ 0.314747] pci 0000:01:07.1: reg 10: [mem 0xfdefe000-0xfdefefff pref] [ 0.314785] pci 0000:01:0b.0: reg 10: [mem 0xfddff000-0xfddff7ff] [ 0.314789] pci 0000:01:0b.0: reg 14: [mem 0xfddf8000-0xfddfbfff] [ 0.314812] pci 0000:01:0b.0: supports D1 D2 [ 0.314814] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.314816] pci 0000:01:0b.0: PME# disabled [ 0.314834] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.314837] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.314839] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.314842] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.314844] pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.314846] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.314848] pci 0000:00:06.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode) [ 0.314850] pci 0000:00:06.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode) [ 0.314852] pci 0000:00:06.0: bridge window [mem 0x120000000-0xfcffffffff] (subtractive decode) [ 0.314917] pci 0000:02:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff] [ 0.314923] pci 0000:02:00.0: reg 30: [mem 0xfdce0000-0xfdceffff pref] [ 0.314943] pci 0000:02:00.0: PME# supported from D3hot [ 0.314947] pci 0000:02:00.0: PME# disabled [ 0.314977] pci 0000:02:00.1: reg 10: [io 0x9c00-0x9c07] [ 0.314983] pci 0000:02:00.1: reg 14: [io 0x9800-0x9803] [ 0.314989] pci 0000:02:00.1: reg 18: [io 0x9400-0x9407] [ 0.314995] pci 0000:02:00.1: reg 1c: [io 0x9000-0x9003] [ 0.315001] pci 0000:02:00.1: reg 20: [io 0x8c00-0x8c0f] [ 0.315039] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.315048] pci 0000:00:0e.0: PCI bridge to [bus 02-02] [ 0.315051] pci 0000:00:0e.0: bridge window [io 0x8000-0x9fff] [ 0.315053] pci 0000:00:0e.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.315056] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.315084] pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.315090] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.315097] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.315101] pci 0000:03:00.0: reg 24: [io 0x7c00-0x7c7f] [ 0.315104] pci 0000:03:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref] [ 0.330009] pci 0000:00:0f.0: PCI bridge to [bus 03-03] [ 0.330011] pci 0000:00:0f.0: bridge window [io 0x7000-0x7fff] [ 0.330013] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.330016] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.330025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.330247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.373360] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.373490] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.373618] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.373747] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.373875] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.374005] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.374133] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 0.374261] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.374390] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.374518] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.374647] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.374775] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) [ 0.374903] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 0.375029] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.375158] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.375286] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.375415] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.375548] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.375684] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.375821] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 0.375999] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.376168] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.376337] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.376505] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.376675] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.376843] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.377011] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.377178] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.377347] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.377518] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.377687] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.377857] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.378026] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.378194] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.378363] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.378533] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.378702] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.378873] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.379041] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.379210] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.379252] HEST: Table is not found! [ 0.379335] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.379337] vgaarb: loaded [ 0.379459] SCSI subsystem initialized [ 0.379539] libata version 3.00 loaded. [ 0.379578] usbcore: registered new interface driver usbfs [ 0.379588] usbcore: registered new interface driver hub [ 0.379608] usbcore: registered new device driver usb [ 0.379725] ACPI: WMI: Mapper loaded [ 0.379726] PCI: Using ACPI for IRQ routing [ 0.379730] PCI: pci_cache_line_size set to 64 bytes [ 0.379786] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.379788] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff [ 0.379867] NetLabel: Initializing [ 0.379869] NetLabel: domain hash size = 128 [ 0.379870] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.379888] NetLabel: unlabeled traffic allowed by default [ 0.379912] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.379918] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.379921] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.400030] Switching to clocksource hpet [ 0.407861] AppArmor: AppArmor Filesystem Enabled [ 0.407877] pnp: PnP ACPI init [ 0.407898] ACPI: bus type pnp registered [ 0.411940] pnp: PnP ACPI: found 13 devices [ 0.411941] ACPI: ACPI bus type pnp unregistered [ 0.411953] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.411955] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.411957] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.411959] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.411961] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.411964] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.411968] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.411970] system 00:02: [io 0x0800-0x0801] has been reserved [ 0.411972] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.411978] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.411983] system 00:0c: [mem 0x000d4800-0x000d7fff] has been reserved [ 0.411985] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.411987] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.411989] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.411992] system 00:0c: [mem 0xfefff000-0xfefff0ff] has been reserved [ 0.411994] system 00:0c: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.411996] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.411999] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.412001] system 00:0c: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.412003] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.412006] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.412008] system 00:0c: [mem 0xfefff000-0xfeffffff] could not be reserved [ 0.412010] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.412013] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.412015] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.417707] pci 0000:00:06.0: PCI bridge to [bus 01-01] [ 0.417709] pci 0000:00:06.0: bridge window [io disabled] [ 0.417712] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.417714] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.417717] pci 0000:00:0e.0: PCI bridge to [bus 02-02] [ 0.417719] pci 0000:00:0e.0: bridge window [io 0x8000-0x9fff] [ 0.417722] pci 0000:00:0e.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.417724] pci 0000:00:0e.0: bridge window [mem pref disabled] [ 0.417727] pci 0000:00:0f.0: PCI bridge to [bus 03-03] [ 0.417728] pci 0000:00:0f.0: bridge window [io 0x7000-0x7fff] [ 0.417731] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.417733] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.417740] pci 0000:00:06.0: setting latency timer to 64 [ 0.417744] pci 0000:00:0e.0: setting latency timer to 64 [ 0.417748] pci 0000:00:0f.0: setting latency timer to 64 [ 0.417751] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.417753] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.417754] pci_bus 0000:00: resource 6 [mem 0xe0000000-0xf3ffffff] [ 0.417756] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff] [ 0.417758] pci_bus 0000:00: resource 8 [mem 0x120000000-0xfcffffffff] [ 0.417760] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.417762] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref] [ 0.417764] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.417765] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff] [ 0.417767] pci_bus 0000:01: resource 6 [mem 0xe0000000-0xf3ffffff] [ 0.417769] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff] [ 0.417771] pci_bus 0000:01: resource 8 [mem 0x120000000-0xfcffffffff] [ 0.417773] pci_bus 0000:02: resource 0 [io 0x8000-0x9fff] [ 0.417774] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.417776] pci_bus 0000:03: resource 0 [io 0x7000-0x7fff] [ 0.417778] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.417780] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.417811] NET: Registered protocol family 2 [ 0.417956] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.419376] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.423725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.424246] TCP: Hash tables configured (established 524288 bind 65536) [ 0.424248] TCP reno registered [ 0.424263] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.424306] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.424437] NET: Registered protocol family 1 [ 0.441330] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441371] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441413] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441454] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441498] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441548] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441602] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441658] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441717] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.441743] pci 0000:03:00.0: Boot video device [ 0.441746] PCI: CLS 32 bytes, default 64 [ 0.481991] PCI-DMA: Disabling AGP. [ 0.482094] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.482096] PCI-DMA: using GART IOMMU. [ 0.482099] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.485064] Scanning for low memory corruption every 60 seconds [ 0.485188] audit: initializing netlink socket (disabled) [ 0.485207] type=2000 audit(1295239817.480:1): initialized [ 0.495218] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.496324] VFS: Disk quotas dquot_6.5.2 [ 0.496369] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.496841] fuse init (API version 7.14) [ 0.496907] msgmni has been set to 7885 [ 0.497132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.497134] io scheduler noop registered [ 0.497135] io scheduler deadline registered [ 0.497166] io scheduler cfq registered (default) [ 0.497278] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.497293] alloc irq_desc for 40 on node 0 [ 0.497294] alloc kstat_irqs on node 0 [ 0.497302] pcieport 0000:00:0e.0: irq 40 for MSI/MSI-X [ 0.497358] pcieport 0000:00:0f.0: setting latency timer to 64 [ 0.497369] alloc irq_desc for 41 on node 0 [ 0.497370] alloc kstat_irqs on node 0 [ 0.497374] pcieport 0000:00:0f.0: irq 41 for MSI/MSI-X [ 0.497425] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.497444] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.497589] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.497594] ACPI: Power Button [PWRB] [ 0.497643] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.497646] ACPI: Power Button [PWRF] [ 0.497691] ACPI: Fan [FAN] (on) [ 0.497987] ACPI: acpi_idle registered with cpuidle [ 0.502104] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20100428/nspredef-1059) [ 0.502110] ACPI: Expecting a [Reference] package element, found type 0 [ 0.502112] ACPI: Invalid passive threshold [ 0.502412] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.502420] ACPI: Thermal Zone [THRM] (40 C) [ 0.502464] ERST: Table is not found! [ 0.502634] Linux agpgart interface v0.103 [ 0.502638] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.502727] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.502965] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.503863] brd: module loaded [ 0.504276] loop: module loaded [ 0.504546] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.511633] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.511637] alloc irq_desc for 23 on node 0 [ 0.511639] alloc kstat_irqs on node 0 [ 0.511648] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.511670] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.511675] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.511959] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.511961] alloc irq_desc for 22 on node 0 [ 0.511962] alloc kstat_irqs on node 0 [ 0.511968] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.511981] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.511986] pata_acpi 0000:00:05.1: PCI INT B disabled [ 0.512265] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.512268] alloc irq_desc for 21 on node 0 [ 0.512269] alloc kstat_irqs on node 0 [ 0.512275] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.512291] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 0.512296] pata_acpi 0000:00:05.2: PCI INT C disabled [ 0.512332] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001) [ 0.512583] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 0.512585] alloc irq_desc for 16 on node 0 [ 0.512587] alloc kstat_irqs on node 0 [ 0.512593] pata_acpi 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 0.512617] pata_acpi 0000:02:00.1: setting latency timer to 64 [ 0.512625] pata_acpi 0000:02:00.1: PCI INT B disabled [ 0.512953] Fixed MDIO Bus: probed [ 0.512976] PPP generic driver version 2.4.2 [ 0.513007] tun: Universal TUN/TAP device driver, 1.6 [ 0.513008] tun: (C) 1999-2004 Max Krasnyansky [ 0.513075] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.513360] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.513362] alloc irq_desc for 20 on node 0 [ 0.513363] alloc kstat_irqs on node 0 [ 0.513369] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.513395] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.513398] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.513427] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.513453] ehci_hcd 0000:00:02.1: debug port 1 [ 0.513459] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.513478] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000 [ 0.530026] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.530122] hub 1-0:1.0: USB hub found [ 0.530127] hub 1-0:1.0: 10 ports detected [ 0.530196] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.530484] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.530487] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.530496] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.530498] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.530524] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.530546] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.592101] hub 2-0:1.0: USB hub found [ 0.592105] hub 2-0:1.0: 10 ports detected [ 0.592169] uhci_hcd: USB Universal Host Controller Interface driver [ 0.592255] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.592256] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.592380] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.592446] mice: PS/2 mouse device common for all mice [ 0.592535] rtc_cmos 00:05: RTC can wake from S4 [ 0.592567] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.592599] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.592668] device-mapper: uevent: version 1.0.3 [ 0.592718] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.592779] device-mapper: multipath: version 1.1.1 loaded [ 0.592781] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.592907] cpuidle: using governor ladder [ 0.592909] cpuidle: using governor menu [ 0.593127] TCP cubic registered [ 0.593226] NET: Registered protocol family 10 [ 0.593538] lo: Disabled Privacy Extensions [ 0.593701] NET: Registered protocol family 17 [ 0.593732] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00) [ 0.593779] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x8 [ 0.593781] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0xa [ 0.593783] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xc [ 0.593784] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xe [ 0.593786] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0x10 [ 0.593788] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 0.593789] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 0.593791] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 0.593892] PM: Resume from disk failed. [ 0.593902] registered taskstats version 1 [ 0.594034] Freeing initrd memory: 16324k freed [ 0.594177] Magic number: 11:454:818 [ 0.594278] button PNP0C0C:00: hash matches [ 0.594324] rtc_cmos 00:05: setting system clock to 2011-01-17 04:50:18 UTC (1295239818) [ 0.594326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.594327] EDD information not available. [ 0.602974] Freeing unused kernel memory: 908k freed [ 0.603364] Write protecting the kernel read-only data: 10240k [ 0.603490] Freeing unused kernel memory: 412k freed [ 0.603768] Freeing unused kernel memory: 1644k freed [ 0.609296] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.619849] udev[115]: starting version 163 [ 0.691684] pata_amd 0000:00:04.0: version 0.4.1 [ 0.691728] pata_amd 0000:00:04.0: setting latency timer to 64 [ 0.704778] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 0.704784] alloc irq_desc for 19 on node 0 [ 0.704786] alloc kstat_irqs on node 0 [ 0.704797] firewire_ohci 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 0.709256] scsi0 : pata_amd [ 0.716097] pata_jmicron 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 0.716138] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 0.731425] scsi2 : pata_jmicron [ 0.731527] scsi1 : pata_amd [ 0.732175] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.732177] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.737204] sata_nv 0000:00:05.0: version 3.5 [ 0.737219] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.737222] sata_nv 0000:00:05.0: Using SWNCQ mode [ 0.737654] sata_nv 0000:00:05.0: setting latency timer to 64 [ 0.738852] scsi3 : pata_jmicron [ 0.738915] ata3: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16 [ 0.738917] ata4: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16 [ 0.740338] scsi4 : sata_nv [ 0.740694] ahci 0000:02:00.0: version 3.0 [ 0.741039] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 0.741043] ahci 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 0.741124] scsi5 : sata_nv [ 0.741463] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 0.741465] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 0.741656] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.741658] sata_nv 0000:00:05.1: Using SWNCQ mode [ 0.742055] sata_nv 0000:00:05.1: setting latency timer to 64 [ 0.742201] scsi6 : sata_nv [ 0.742375] scsi7 : sata_nv [ 0.742561] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 [ 0.742564] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 [ 0.742666] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.742669] sata_nv 0000:00:05.2: Using SWNCQ mode [ 0.743096] sata_nv 0000:00:05.2: setting latency timer to 64 [ 0.743228] scsi8 : sata_nv [ 0.743330] scsi9 : sata_nv [ 0.743515] ata9: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 [ 0.743517] ata10: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 [ 0.743637] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.743928] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 0.743932] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 0.743935] forcedeth 0000:00:08.0: setting latency timer to 64 [ 0.743986] nv_probe: set workaround bit for reversed mac addr [ 0.760061] firewire_ohci: Added fw-ohci device 0000:01:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 0.760096] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.760100] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.760104] ahci 0000:02:00.0: setting latency timer to 64 [ 0.760263] scsi10 : ahci [ 0.760346] scsi11 : ahci [ 0.760390] ata11: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 16 [ 0.760393] ata12: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 16 [ 0.911265] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 0.920346] ata1.00: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100 [ 0.920349] ata1.00: 488397168 sectors, multi 1: LBA48 [ 0.920366] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13) [ 0.960281] ata1.00: configured for UDMA/100 [ 0.960410] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 [ 0.960573] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.960649] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.960653] ata2: port disabled. ignoring. [ 0.960809] sd 0:0:0:0: [sda] Write Protect is off [ 0.960811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.960828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.960949] sda: sda2 [ 0.970404] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.069629] Initializing USB Mass Storage driver... [ 1.069775] scsi12 : usb-storage 1-6:1.0 [ 1.069870] usbcore: registered new interface driver usb-storage [ 1.069872] USB Mass Storage support registered. [ 1.070029] ata7: SATA link down (SStatus 0 SControl 300) [ 1.070050] ata5: SATA link down (SStatus 0 SControl 300) [ 1.071272] ata9: SATA link down (SStatus 0 SControl 300) [ 1.111274] ata11: SATA link down (SStatus 0 SControl 300) [ 1.120039] ata12: SATA link down (SStatus 0 SControl 300) [ 1.260082] firewire_core: created device fw0: GUID 001e8c000123283b, S400 [ 1.270629] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1f:c6:3b:d0:db [ 1.270632] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.271011] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 [ 1.271016] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21 [ 1.271019] forcedeth 0000:00:09.0: setting latency timer to 64 [ 1.271079] nv_probe: set workaround bit for reversed mac addr [ 1.620021] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.640101] usb 2-4: new low speed USB device using ohci_hcd and address 2 [ 1.681400] ata6.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133 [ 1.681402] ata6.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.773035] ata6.00: configured for UDMA/133 [ 1.773151] scsi 5:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5 [ 1.773307] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 1.773310] sd 5:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.773382] sd 5:0:0:0: [sdb] Write Protect is off [ 1.773385] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.773403] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.773526] sdb: [ 1.800659] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1f:c6:3b:db:8a [ 1.800662] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.821049] sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 1.853795] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.062772] scsi 12:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 2.063264] scsi 12:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 2.063762] scsi 12:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 2.064262] scsi 12:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 2.064729] sd 12:0:0:0: Attached scsi generic sg2 type 0 [ 2.064873] sd 12:0:0:1: Attached scsi generic sg3 type 0 [ 2.065067] sd 12:0:0:2: Attached scsi generic sg4 type 0 [ 2.065193] sd 12:0:0:3: Attached scsi generic sg5 type 0 [ 2.067884] sd 12:0:0:0: [sdc] Attached SCSI removable disk [ 2.068507] sd 12:0:0:1: [sdd] Attached SCSI removable disk [ 2.069132] sd 12:0:0:2: [sde] Attached SCSI removable disk [ 2.069758] sd 12:0:0:3: [sdf] Attached SCSI removable disk [ 2.221267] usb 2-9: new full speed USB device using ohci_hcd and address 3 [ 2.260025] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.280118] ata8.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100 [ 2.320128] ata8.00: configured for UDMA/100 [ 2.321988] scsi 7:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5 [ 2.327520] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.327522] Uniform CD-ROM driver Revision: 3.20 [ 2.327622] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 2.327676] sr 7:0:0:0: Attached scsi generic sg6 type 5 [ 2.651266] ata10: SATA link down (SStatus 0 SControl 300) [ 2.655449] usbcore: registered new interface driver hiddev [ 2.664334] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3 [ 2.664430] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:02.0-4/input0 [ 2.664455] usbcore: registered new interface driver usbhid [ 2.664456] usbhid: USB HID core driver [ 2.801271] usb 2-10: new full speed USB device using ohci_hcd and address 4 [ 3.011568] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem [ 3.011572] EXT4-fs (sdb1): write access will be enabled during recovery [ 3.231192] EXT4-fs (sdb1): orphan cleanup on readonly fs [ 3.688600] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1310946 [ 3.688639] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1310943 [ 3.688648] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1310938 [ 3.688656] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1310912 [ 3.688663] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1310911 [ 3.688669] EXT4-fs (sdb1): 5 orphan inodes deleted [ 3.688672] EXT4-fs (sdb1): recovery complete [ 3.873429] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 16.633957] udev[504]: starting version 163 [ 16.700524] lp: driver loaded but no devices found [ 16.731847] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 16.731853] ACPI: resource nForce2_smbus [io 0x1c40-0x1c7f] conflicts with ACPI region SM00 [io 0x1c40-0x1c45 pref disabled] [ 16.731855] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.814696] Adding 6385800k swap on /dev/sdb5. Priority:-1 extents:1 across:6385800k [ 16.830240] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 16.894626] EDAC MC: Ver: 2.1.0 Dec 2 2010 [ 16.899626] parport_pc 00:09: reported by Plug and Play ACPI [ 16.899652] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 16.951791] EDAC amd64_edac: Ver: 3.3.0 Dec 2 2010 [ 16.961040] IR NEC protocol handler initialized [ 16.964189] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 16.964199] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 16.964200] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 16.964201] (Note that use of the override may cause unknown side effects.) [ 16.964219] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 16.976116] Linux video capture interface: v2.00 [ 16.984115] IR RC5(x) protocol handler initialized [ 16.990639] lp0: using parport0 (interrupt-driven). [ 16.993250] type=1400 audit(1295239834.888:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=743 comm="apparmor_parser" [ 16.993456] type=1400 audit(1295239834.888:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=743 comm="apparmor_parser" [ 16.993574] type=1400 audit(1295239834.888:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=743 comm="apparmor_parser" [ 16.994653] type=1400 audit(1295239834.888:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=794 comm="apparmor_parser" [ 16.994857] type=1400 audit(1295239834.888:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=794 comm="apparmor_parser" [ 16.994971] type=1400 audit(1295239834.888:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=794 comm="apparmor_parser" [ 17.001728] type=1400 audit(1295239834.898:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=815 comm="apparmor_parser" [ 17.002060] type=1400 audit(1295239834.898:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=815 comm="apparmor_parser" [ 17.002181] type=1400 audit(1295239834.898:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=815 comm="apparmor_parser" [ 17.011196] ppdev: user-space parallel port driver [ 17.017110] bttv: driver version 0.9.18 loaded [ 17.017113] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 17.024094] IR RC6 protocol handler initialized [ 17.032516] bttv: Bt8xx card found (0). [ 17.032861] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 17.032866] alloc irq_desc for 17 on node 0 [ 17.032867] alloc kstat_irqs on node 0 [ 17.032879] bttv 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 17.032887] bttv0: Bt878 (rev 2) at 0000:01:07.0, irq: 17, latency: 32, mmio: 0xfdeff000 [ 17.033162] nvidia: module license 'NVIDIA' taints kernel. [ 17.033165] Disabling lock debugging due to kernel taint [ 17.033920] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 17.033923] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 17.033966] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] [ 17.036464] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 17.065656] tveeprom 1-0050: Hauppauge model 38101, rev B210, serial# 1843003 [ 17.065658] tveeprom 1-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) [ 17.065661] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) [ 17.065663] tveeprom 1-0050: audio processor is None (idx 0) [ 17.065665] tveeprom 1-0050: has no radio [ 17.065666] bttv0: Hauppauge eeprom indicates model#38101 [ 17.065668] bttv0: tuner type=2 [ 17.125591] bttv0: audio absent, no audio device found! [ 17.136531] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 17.141033] tuner-simple 1-0061: creating new instance [ 17.141037] tuner-simple 1-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) [ 17.141695] bttv0: registered device video0 [ 17.141721] bttv0: registered device vbi0 [ 17.141737] bttv0: PLL: 28636363 => 35468950 . [ 17.159271] IR JVC protocol handler initialized [ 17.170022] . [ 17.187383] WARNING! power/level is deprecated; use power/control instead [ 17.190372] ok [ 17.273386] Bt87x 0000:01:07.1: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 17.273547] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 17.424618] IR Sony protocol handler initialized [ 17.427276] lirc_dev: IR Remote Control driver registered, major 249 [ 17.428370] IR LIRC bridge handler initialized [ 17.675722] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 17.675729] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 17.675732] hda_intel: msi for device 1043:81f6 set to 0 [ 17.675825] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 17.676117] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 17.676119] nvidia 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 17.676124] nvidia 0000:03:00.0: setting latency timer to 64 [ 17.676127] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 17.676446] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.06 Mon Sep 13 04:29:19 PDT 2010 [ 17.923693] Adding 3100508k swap on /dev/sdb7. Priority:-2 extents:1 across:3100508k [ 18.010738] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 18.146508] alloc irq_desc for 42 on node 0 [ 18.146512] alloc kstat_irqs on node 0 [ 18.146521] forcedeth 0000:00:08.0: irq 42 for MSI/MSI-X [ 18.150445] alloc irq_desc for 43 on node 0 [ 18.150448] alloc kstat_irqs on node 0 [ 18.150457] forcedeth 0000:00:09.0: irq 43 for MSI/MSI-X [ 18.150642] eth1: no link during initialization. [ 18.151557] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 18.178869] type=1400 audit(1295239836.068:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1210 comm="apparmor_parser"