[ 30.743187] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.824994] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 30.825848] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 30.825851] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 30.825853] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 31.093072] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 31.226100] cfg80211: Found new beacon on frequency: 5200 MHz (Ch 40) on phy0 [ 31.261025] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [ 31.400074] Skipping EDID probe due to cached edid [ 33.140110] Skipping EDID probe due to cached edid [ 33.764912] ata1.00: configured for UDMA/133 [ 33.764916] ata1: EH complete [ 33.765025] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 33.991312] Skipping EDID probe due to cached edid [ 34.187025] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600 [ 34.841423] Skipping EDID probe due to cached edid [ 35.690049] Skipping EDID probe due to cached edid [ 35.794322] Bluetooth: L2CAP ver 2.14 [ 35.794326] Bluetooth: L2CAP socket layer initialized [ 35.799883] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.799886] Bluetooth: BNEP filters: protocol multicast [ 35.809175] Bluetooth: SCO (Voice Link) ver 0.6 [ 35.809178] Bluetooth: SCO socket layer initialized [ 35.857615] ppdev: user-space parallel port driver [ 35.930907] Bluetooth: RFCOMM TTY layer initialized [ 35.930913] Bluetooth: RFCOMM socket layer initialized [ 35.930915] Bluetooth: RFCOMM ver 1.11 [ 36.960063] Skipping EDID probe due to cached edid [ 40.140648] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [ 40.144029] wlan0: authenticated [ 40.144055] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [ 40.147366] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=19) [ 40.147369] wlan0: associated [ 40.150085] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.811289] virbr0: no IPv6 routers present [ 41.037373] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 41.105015] lo: Disabled Privacy Extensions [ 42.241344] Skipping EDID probe due to cached edid [ 50.890060] wlan0: no IPv6 routers present [ 68.846512] ata1.00: configured for UDMA/133 [ 68.846517] ata1: EH complete [ 68.846711] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.901923] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [ 69.790068] usb 4-2: USB disconnect, address 3 [ 69.790304] btusb_intr_complete: hci0 urb ffff880122303240 failed to resubmit (19) [ 69.790315] btusb_bulk_complete: hci0 urb ffff880122303300 failed to resubmit (19) [ 69.791287] btusb_bulk_complete: hci0 urb ffff8801223033c0 failed to resubmit (19) [ 69.791377] btusb_send_frame: hci0 urb ffff8801371309c0 submission failed [ 70.050165] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [ 70.072005] cfg80211: All devices are disconnected, going to restore regulatory settings [ 70.072010] cfg80211: Restoring regulatory settings [ 70.072014] cfg80211: Calling CRDA to update world regulatory domain [ 70.074133] cfg80211: World regulatory domain updated: [ 70.074136] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 70.074139] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 70.074142] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 70.074145] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 70.074148] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 70.074150] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 70.292318] PM: Syncing filesystems ... done. [ 70.293808] PM: Preparing system for mem sleep [ 70.820352] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 70.841363] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done. [ 70.861373] PM: Entering mem sleep [ 70.861454] Suspending console(s) (use no_console_suspend to debug) [ 70.862232] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 70.862286] sd 0:0:0:0: [sda] Stopping disk [ 70.883625] serial 00:0a: disabled [ 70.884138] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 70.884150] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 70.884162] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 70.884173] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 70.884181] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [ 70.884190] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [ 70.884213] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 70.884224] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 70.884236] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 70.884431] e1000e 0000:00:19.0: PCI INT A disabled [ 70.884439] e1000e 0000:00:19.0: PME# enabled [ 70.884438] ACPI handle has no context! [ 70.884448] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 70.901297] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [ 70.901312] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 70.910069] i915 0000:00:02.0: power state changed by ACPI to D3 [ 70.990514] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 71.010029] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 125.832 msecs [ 71.010042] PM: suspend of drv: dev:pci0000:00 complete after 125.568 msecs [ 71.010051] PM: suspend of devices complete after 148.214 msecs [ 71.010054] PM: suspend devices took 0.150 seconds [ 71.101307] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 71.161319] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 71.241317] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 71.301317] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [ 71.361319] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 71.361455] PM: late suspend of devices complete after 351.397 msecs [ 71.461311] ACPI: Preparing to enter system sleep state S3 [ 71.841344] PM: Saving platform NVS memory [ 71.854003] Disabling non-boot CPUs ... [ 71.861439] Broke affinity for irq 12 [ 71.861479] Broke affinity for irq 21 [ 71.970018] CPU 1 is now offline [ 71.970021] SMP alternatives: switching to UP code [ 71.978766] Extended CMOS year: 2000 [ 71.978766] Back to C! [ 71.978766] PM: Restoring platform NVS memory [ 71.978766] Extended CMOS year: 2000 [ 71.978766] Enabling non-boot CPUs ... [ 71.978766] SMP alternatives: switching to SMP code [ 71.987335] Booting Node 0 Processor 1 APIC 0x1 [ 72.241347] CPU1 is up [ 72.242908] ACPI: Waking up from system sleep state S3 [ 73.041476] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 73.041504] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 73.041517] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 73.041540] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 73.151308] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 73.171318] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 73.171348] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 73.191317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 73.211319] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 73.211324] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.715 msecs [ 73.211355] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 73.231317] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 73.251316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 73.251346] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 73.271316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 73.291316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 73.291356] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 73.311317] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 73.331317] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 73.331360] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 73.331402] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021) [ 73.331408] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc010c000) [ 73.331413] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) [ 73.331425] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 73.331483] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041) [ 73.331490] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x4040) [ 73.331502] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 73.331571] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 73.351319] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 73.371316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 73.371346] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 73.391317] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 73.411319] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 73.411352] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 73.411393] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 73.411441] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 73.431317] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 73.451316] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 73.451331] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 73.451343] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 73.451348] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 73.451354] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 73.451366] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 73.451465] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 73.451993] PM: early resume of devices complete after 410.637 msecs [ 73.461324] i915 0000:00:02.0: power state changed by ACPI to D0 [ 73.461369] i915 0000:00:02.0: power state changed by ACPI to D0 [ 73.461374] i915 0000:00:02.0: setting latency timer to 64 [ 73.461423] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 73.461428] e1000e 0000:00:19.0: PME# disabled [ 73.461505] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 73.463638] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 73.463645] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 73.463669] usb usb4: root hub lost power or was reset [ 73.463768] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 73.463775] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 73.463815] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 73.463852] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [ 73.463858] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [ 73.463863] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [ 73.463912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 73.463919] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 73.463945] usb usb7: root hub lost power or was reset [ 73.463968] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 73.463974] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 73.463999] usb usb8: root hub lost power or was reset [ 73.464062] pci 0000:00:1e.0: setting latency timer to 64 [ 73.464080] ahci 0000:00:1f.2: setting latency timer to 64 [ 73.464548] sd 0:0:0:0: [sda] Starting disk [ 73.475933] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 73.476408] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 73.476465] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 73.476476] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 73.476654] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 73.477193] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 73.477201] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 73.477209] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 73.477236] usb usb3: root hub lost power or was reset [ 73.477392] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 73.477396] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 73.477399] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 73.477403] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 73.477406] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 73.477412] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 73.477434] usb usb5: root hub lost power or was reset [ 73.477458] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 73.477463] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 73.477469] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 73.477504] usb usb6: root hub lost power or was reset [ 73.477583] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 73.477590] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 73.477597] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 73.496309] serial 00:0a: activated [ 73.640073] PM: resume of drv:usb dev:usb7 complete after 175.702 msecs [ 73.640096] PM: resume of drv:usb dev:usb8 complete after 175.690 msecs [ 73.640106] PM: resume of drv:hub dev:7-0:1.0 complete after 175.714 msecs [ 73.640114] PM: resume of drv:hub dev:8-0:1.0 complete after 175.688 msecs [ 73.640118] PM: resume of drv:usb dev:usb5 complete after 175.814 msecs [ 73.640141] PM: resume of drv:usb dev:usb3 complete after 175.909 msecs [ 73.640144] PM: resume of drv:usb dev:usb6 complete after 175.806 msecs [ 73.640151] PM: resume of drv:hub dev:5-0:1.0 complete after 175.831 msecs [ 73.640154] PM: resume of drv:hub dev:6-0:1.0 complete after 175.801 msecs [ 73.640158] PM: resume of drv:hub dev:3-0:1.0 complete after 175.910 msecs [ 73.650197] PM: resume of drv:i915 dev:0000:00:02.0 complete after 188.920 msecs [ 73.660038] PM: resume of drv:usb dev:usb1 complete after 195.875 msecs [ 73.660068] PM: resume of drv:hub dev:1-0:1.0 complete after 195.887 msecs [ 73.660098] PM: resume of drv: dev:ep_81 complete after 163.355 msecs [ 73.750056] PM: resume of drv:usb dev:usb4 complete after 285.790 msecs [ 73.750088] PM: resume of drv:hub dev:4-0:1.0 complete after 285.801 msecs [ 73.780027] usb 1-6: reset high speed USB device using ehci_hcd and address 4 [ 73.811329] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 73.811354] ata2: SATA link down (SStatus 0 SControl 300) [ 73.811801] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 73.811806] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 73.811809] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 73.812684] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 73.812688] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 73.812692] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 73.812923] ata1.00: configured for UDMA/133 [ 73.840831] ata1.00: configured for UDMA/133 [ 73.840833] ata1: EH complete [ 73.840962] PM: resume of drv:sd dev:0:0:0:0 complete after 376.410 msecs [ 73.840987] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 376.396 msecs [ 73.925466] PM: resume of drv:usb dev:1-6 complete after 461.022 msecs [ 73.925480] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 461.003 msecs [ 73.925498] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 461.037 msecs [ 73.925529] PM: resume of drv: dev:ep_81 complete after 172.569 msecs [ 74.040179] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [ 74.196964] PM: resume of drv:usb dev:4-1 complete after 732.449 msecs [ 74.196996] PM: resume of drv:usb dev:4-1:1.0 complete after 732.464 msecs [ 74.197027] PM: resume of drv: dev:ep_81 complete after 271.464 msecs [ 74.199969] PM: resume of devices complete after 747.922 msecs [ 74.200164] PM: resume devices took 0.750 seconds [ 74.200195] PM: Finishing wakeup. [ 74.200196] Restarting tasks ... done. [ 74.217826] video LNXVIDEO:00: Restoring backlight state [ 74.239170] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 74.310106] Skipping EDID probe due to cached edid [ 74.501487] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 74.561349] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 74.561922] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 74.702859] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 74.990120] ata1.00: configured for UDMA/133 [ 74.990124] ata1: EH complete [ 74.990252] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 75.055308] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600 [ 75.580050] usb 4-2: new full speed USB device using uhci_hcd and address 4 [ 79.293086] ata1.00: configured for UDMA/133 [ 79.293090] ata1: EH complete [ 79.293283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 79.381483] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [ 79.800625] usb 4-2: USB disconnect, address 4 [ 79.801925] btusb_intr_complete: hci0 urb ffff88011d206780 failed to resubmit (19) [ 79.801938] btusb_bulk_complete: hci0 urb ffff88011d206d80 failed to resubmit (19) [ 79.802928] btusb_bulk_complete: hci0 urb ffff88011d206300 failed to resubmit (19) [ 79.803134] btusb_send_frame: hci0 urb ffff880118d1be40 submission failed [ 80.112347] PM: Syncing filesystems ... done. [ 80.113830] PM: Preparing system for mem sleep [ 80.621636] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 80.650120] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 80.660104] PM: Entering mem sleep [ 80.660190] Suspending console(s) (use no_console_suspend to debug) [ 80.660971] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 80.661152] sd 0:0:0:0: [sda] Stopping disk [ 80.676836] serial 00:0a: disabled [ 80.677287] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 80.677299] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 80.677311] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 80.677322] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 80.677328] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [ 80.677338] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [ 80.677365] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 80.677501] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 80.677626] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 80.677704] ACPI handle has no context! [ 80.677821] e1000e 0000:00:19.0: PME# enabled [ 80.677835] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 80.690053] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 80.691296] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [ 80.691357] i915 0000:00:02.0: power state changed by ACPI to D3 [ 80.710024] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 80.731275] PM: suspend of devices complete after 70.696 msecs [ 80.731277] PM: suspend devices took 0.070 seconds [ 80.771323] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 80.791319] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 80.831319] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 80.851318] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [ 80.921308] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 80.921440] PM: late suspend of devices complete after 190.159 msecs [ 81.021312] ACPI: Preparing to enter system sleep state S3 [ 81.401346] PM: Saving platform NVS memory [ 81.412759] Disabling non-boot CPUs ... [ 81.530023] CPU 1 is now offline [ 81.530026] SMP alternatives: switching to UP code [ 81.538792] Extended CMOS year: 2000 [ 81.538792] Back to C! [ 81.538792] PM: Restoring platform NVS memory [ 81.538792] Extended CMOS year: 2000 [ 81.538792] Enabling non-boot CPUs ... [ 81.538792] SMP alternatives: switching to SMP code [ 81.547373] Booting Node 0 Processor 1 APIC 0x1 [ 81.791345] CPU1 is up [ 81.792895] ACPI: Waking up from system sleep state S3 [ 82.591473] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 82.591500] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 82.591514] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 82.591537] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 82.701308] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 82.721317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 82.721347] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 82.741317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 82.761317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 82.761322] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.716 msecs [ 82.761353] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 82.781317] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 82.801316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 82.801346] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 82.821316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 82.841316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 82.841356] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 82.861316] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 82.881316] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 82.881359] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 82.881402] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021) [ 82.881407] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc010c000) [ 82.881413] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) [ 82.881425] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 82.881483] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041) [ 82.881490] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x4040) [ 82.881502] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 82.881571] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 82.901317] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 82.921316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 82.921346] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 82.941317] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 82.961316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 82.961349] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 82.961390] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 82.961438] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 82.981316] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 83.001316] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 83.001331] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 83.001343] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 83.001348] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 83.001354] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 83.001366] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 83.001464] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 83.001600] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 83.001992] PM: early resume of devices complete after 410.638 msecs [ 83.011332] i915 0000:00:02.0: power state changed by ACPI to D0 [ 83.011378] i915 0000:00:02.0: power state changed by ACPI to D0 [ 83.011383] i915 0000:00:02.0: setting latency timer to 64 [ 83.011432] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 83.011438] e1000e 0000:00:19.0: PME# disabled [ 83.011514] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 83.013644] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 83.013651] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 83.013678] usb usb4: root hub lost power or was reset [ 83.013778] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 83.013784] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 83.013824] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 83.013860] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [ 83.013866] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [ 83.013872] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [ 83.013919] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 83.013925] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 83.013952] usb usb7: root hub lost power or was reset [ 83.013975] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 83.013981] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 83.014007] usb usb8: root hub lost power or was reset [ 83.014067] pci 0000:00:1e.0: setting latency timer to 64 [ 83.014085] ahci 0000:00:1f.2: setting latency timer to 64 [ 83.014550] sd 0:0:0:0: [sda] Starting disk [ 83.025870] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 83.026152] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 83.026278] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 83.026478] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 83.026713] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 83.027102] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 83.027110] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 83.027118] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 83.027142] usb usb3: root hub lost power or was reset [ 83.027164] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 83.027170] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 83.027175] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 83.027177] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 83.027184] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 83.027191] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 83.027204] usb usb5: root hub lost power or was reset [ 83.027296] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 83.027300] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 83.027303] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 83.027315] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 83.027349] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 83.027351] usb usb6: root hub lost power or was reset [ 83.027400] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 83.044956] serial 00:0a: activated [ 83.190058] PM: resume of drv:usb dev:usb7 complete after 175.679 msecs [ 83.190080] PM: resume of drv:usb dev:usb8 complete after 175.666 msecs [ 83.190091] PM: resume of drv:hub dev:7-0:1.0 complete after 175.692 msecs [ 83.190100] PM: resume of drv:hub dev:8-0:1.0 complete after 175.666 msecs [ 83.190125] PM: resume of drv:usb dev:usb5 complete after 175.815 msecs [ 83.190129] PM: resume of drv:usb dev:usb3 complete after 175.890 msecs [ 83.190134] PM: resume of drv:hub dev:5-0:1.0 complete after 175.807 msecs [ 83.190138] PM: resume of drv:hub dev:3-0:1.0 complete after 175.883 msecs [ 83.190156] PM: resume of drv:usb dev:usb6 complete after 175.812 msecs [ 83.190186] PM: resume of drv:hub dev:6-0:1.0 complete after 175.824 msecs [ 83.200200] PM: resume of drv:i915 dev:0000:00:02.0 complete after 188.916 msecs [ 83.210042] PM: resume of drv:usb dev:usb1 complete after 195.874 msecs [ 83.210074] PM: resume of drv:hub dev:1-0:1.0 complete after 195.888 msecs [ 83.210105] PM: resume of drv: dev:ep_81 complete after 164.718 msecs [ 83.300054] PM: resume of drv:usb dev:usb4 complete after 285.782 msecs [ 83.300086] PM: resume of drv:hub dev:4-0:1.0 complete after 285.792 msecs [ 83.330046] usb 1-6: reset high speed USB device using ehci_hcd and address 4 [ 83.361342] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 83.361368] ata2: SATA link down (SStatus 0 SControl 300) [ 83.361806] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 83.361810] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 83.361814] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 83.362436] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 83.362440] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 83.362444] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 83.362640] ata1.00: configured for UDMA/133 [ 83.390875] ata1.00: configured for UDMA/133 [ 83.390879] ata1: EH complete [ 83.391058] PM: resume of drv:sd dev:0:0:0:0 complete after 376.502 msecs [ 83.391067] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 376.473 msecs [ 83.475692] PM: resume of drv:usb dev:1-6 complete after 461.242 msecs [ 83.475702] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 461.220 msecs [ 83.475727] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 461.260 msecs [ 83.475756] PM: resume of drv: dev:ep_81 complete after 172.799 msecs [ 83.591368] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [ 83.747061] PM: resume of drv:usb dev:4-1 complete after 732.541 msecs [ 83.747093] PM: resume of drv:usb dev:4-1:1.0 complete after 732.557 msecs [ 83.747123] PM: resume of drv: dev:ep_81 complete after 271.336 msecs [ 83.750044] PM: resume of devices complete after 747.996 msecs [ 83.750228] PM: resume devices took 0.750 seconds [ 83.750257] PM: Finishing wakeup. [ 83.750259] Restarting tasks ... done. [ 83.766053] video LNXVIDEO:00: Restoring backlight state [ 83.892003] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 83.950262] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 83.960071] Skipping EDID probe due to cached edid [ 84.010092] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 84.010644] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 84.072249] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 84.366869] ata1.00: configured for UDMA/133 [ 84.366874] ata1: EH complete [ 84.367063] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 84.563829] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600 [ 84.830049] usb 4-2: new full speed USB device using uhci_hcd and address 5 [ 90.381693] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [ 90.384919] wlan0: authenticated [ 90.384949] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [ 90.388270] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=4) [ 90.388274] wlan0: associated [ 90.394231] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 100.760062] wlan0: no IPv6 routers present [ 108.603055] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [ 108.607685] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 1) [ 108.801518] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 2) [ 108.803119] wlan0: authenticated [ 108.803224] wlan0: associate with 00:3a:98:54:0c:b0 (try 1) [ 108.804888] wlan0: RX AssocResp from 00:3a:98:54:0c:b0 (capab=0x101 status=0 aid=3) [ 108.804897] wlan0: associated [ 152.520679] ata1.00: configured for UDMA/133 [ 152.520688] ata1: EH complete [ 152.521121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 152.564925] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [ 153.040073] usb 4-2: USB disconnect, address 5 [ 153.040947] btusb_intr_complete: hci0 urb ffff880110621a80 failed to resubmit (19) [ 153.040958] btusb_bulk_complete: hci0 urb ffff880110621000 failed to resubmit (19) [ 153.041943] btusb_bulk_complete: hci0 urb ffff880110621c00 failed to resubmit (19) [ 153.042020] btusb_send_frame: hci0 urb ffff880113249480 submission failed [ 153.390410] wlan0: deauthenticating from 00:3a:98:54:0c:b0 by local choice (reason=3) [ 153.421401] cfg80211: All devices are disconnected, going to restore regulatory settings [ 153.421413] cfg80211: Restoring regulatory settings [ 153.421421] cfg80211: Calling CRDA to update world regulatory domain [ 153.426391] cfg80211: World regulatory domain updated: [ 153.426398] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 153.426406] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 153.426414] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 153.426421] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 153.426427] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 153.426434] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 153.672471] PM: Syncing filesystems ... done. [ 153.674258] PM: Preparing system for mem sleep [ 154.170440] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 154.200114] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 154.220109] PM: Entering mem sleep [ 154.220188] Suspending console(s) (use no_console_suspend to debug) [ 154.230410] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 154.230677] sd 0:0:0:0: [sda] Stopping disk [ 154.250998] serial 00:0a: disabled [ 154.251454] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 154.251466] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 154.251478] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 154.251478] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 154.251486] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [ 154.251490] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [ 154.251511] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 154.251612] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 154.251625] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 154.251636] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 154.251832] e1000e 0000:00:19.0: PME# enabled [ 154.251840] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 154.251892] ACPI handle has no context! [ 154.271307] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [ 154.280031] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 154.280087] i915 0000:00:02.0: power state changed by ACPI to D3 [ 154.320026] PM: suspend of devices complete after 99.447 msecs [ 154.320029] PM: suspend devices took 0.100 seconds [ 154.360074] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 154.380068] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 154.420068] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 154.440068] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [ 154.510058] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 154.510195] PM: late suspend of devices complete after 190.162 msecs [ 154.610060] ACPI: Preparing to enter system sleep state S3 [ 154.990095] PM: Saving platform NVS memory [ 155.001562] Disabling non-boot CPUs ... [ 155.140021] CPU 1 is now offline [ 155.140024] SMP alternatives: switching to UP code [ 155.148801] Extended CMOS year: 2000 [ 155.148801] Back to C! [ 155.148801] PM: Restoring platform NVS memory [ 155.148801] Extended CMOS year: 2000 [ 155.148801] Enabling non-boot CPUs ... [ 155.148801] SMP alternatives: switching to SMP code [ 155.157329] Booting Node 0 Processor 1 APIC 0x1 [ 155.401348] CPU1 is up [ 155.402900] ACPI: Waking up from system sleep state S3 [ 156.201473] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 156.201501] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 156.201514] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 156.201537] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 156.311308] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 156.331317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 156.331347] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 156.351317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 156.371317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 156.371322] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.716 msecs [ 156.371353] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 156.391316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 156.411316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 156.411346] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 156.431317] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 156.451316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 156.451356] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 156.471316] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 156.491316] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 156.491359] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 156.491401] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021) [ 156.491407] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc010c000) [ 156.491412] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) [ 156.491424] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 156.491482] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041) [ 156.491488] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x4040) [ 156.491501] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 156.491569] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 156.511316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 156.531316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 156.531346] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 156.551316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 156.571316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 156.571349] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 156.571391] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 156.571439] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 156.591316] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 156.611316] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 156.611331] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 156.611343] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 156.611349] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 156.611354] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 156.611366] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 156.611465] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 156.611601] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 156.611993] PM: early resume of devices complete after 410.640 msecs [ 156.621328] i915 0000:00:02.0: power state changed by ACPI to D0 [ 156.621374] i915 0000:00:02.0: power state changed by ACPI to D0 [ 156.621379] i915 0000:00:02.0: setting latency timer to 64 [ 156.621429] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 156.621434] e1000e 0000:00:19.0: PME# disabled [ 156.621511] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 156.623643] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 156.623650] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 156.623675] usb usb4: root hub lost power or was reset [ 156.623776] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 156.623782] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 156.623822] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 156.623859] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [ 156.623865] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [ 156.623871] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [ 156.623918] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 156.623925] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 156.623951] usb usb7: root hub lost power or was reset [ 156.623972] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 156.623979] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 156.624003] usb usb8: root hub lost power or was reset [ 156.624065] pci 0000:00:1e.0: setting latency timer to 64 [ 156.624083] ahci 0000:00:1f.2: setting latency timer to 64 [ 156.624567] sd 0:0:0:0: [sda] Starting disk [ 156.635916] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 156.636409] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 156.636418] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 156.636574] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 156.636729] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 156.636755] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 156.636763] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 156.636776] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 156.636808] usb usb3: root hub lost power or was reset [ 156.637121] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 156.637129] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 156.637137] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 156.637260] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 156.637265] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 156.637272] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 156.637295] usb usb5: root hub lost power or was reset [ 156.637399] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 156.637405] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 156.637412] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 156.637436] usb usb6: root hub lost power or was reset [ 156.637457] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 156.637465] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 156.637473] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 156.655439] serial 00:0a: activated [ 156.781383] PM: resume of drv:usb dev:usb7 complete after 156.991 msecs [ 156.781416] PM: resume of drv:hub dev:7-0:1.0 complete after 157.005 msecs [ 156.781425] PM: resume of drv:usb dev:usb8 complete after 156.999 msecs [ 156.781446] PM: resume of drv:hub dev:8-0:1.0 complete after 156.998 msecs [ 156.800056] PM: resume of drv:usb dev:usb6 complete after 175.701 msecs [ 156.800078] PM: resume of drv:usb dev:usb5 complete after 175.757 msecs [ 156.800088] PM: resume of drv:hub dev:6-0:1.0 complete after 175.715 msecs [ 156.800096] PM: resume of drv:hub dev:5-0:1.0 complete after 175.757 msecs [ 156.800099] PM: resume of drv:usb dev:usb3 complete after 175.848 msecs [ 156.800116] PM: resume of drv:hub dev:3-0:1.0 complete after 175.849 msecs [ 156.810201] PM: resume of drv:i915 dev:0000:00:02.0 complete after 188.920 msecs [ 156.820042] PM: resume of drv:usb dev:usb1 complete after 195.860 msecs [ 156.820073] PM: resume of drv:hub dev:1-0:1.0 complete after 195.873 msecs [ 156.820104] PM: resume of drv: dev:ep_81 complete after 164.232 msecs [ 156.891375] PM: resume of drv:usb dev:usb4 complete after 267.091 msecs [ 156.891406] PM: resume of drv:hub dev:4-0:1.0 complete after 267.100 msecs [ 156.940027] usb 1-6: reset high speed USB device using ehci_hcd and address 4 [ 156.971302] ata2: SATA link down (SStatus 0 SControl 300) [ 156.971328] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 156.971798] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 156.971802] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 156.971806] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 156.972449] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 156.972454] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 156.972458] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 156.972653] ata1.00: configured for UDMA/133 [ 157.000823] ata1.00: configured for UDMA/133 [ 157.000826] ata1: EH complete [ 157.000956] PM: resume of drv:sd dev:0:0:0:0 complete after 376.382 msecs [ 157.000985] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 376.372 msecs [ 157.094552] PM: resume of drv:usb dev:1-6 complete after 470.086 msecs [ 157.094565] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 470.067 msecs [ 157.094584] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 470.102 msecs [ 157.094614] PM: resume of drv: dev:ep_81 complete after 199.928 msecs [ 157.200068] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [ 157.357032] PM: resume of drv:usb dev:4-1 complete after 732.496 msecs [ 157.357066] PM: resume of drv:usb dev:4-1:1.0 complete after 732.512 msecs [ 157.357096] PM: resume of drv: dev:ep_81 complete after 262.449 msecs [ 157.360036] PM: resume of devices complete after 747.987 msecs [ 157.360219] PM: resume devices took 0.750 seconds [ 157.360248] PM: Finishing wakeup. [ 157.360250] Restarting tasks ... done. [ 157.378854] video LNXVIDEO:00: Restoring backlight state [ 157.505993] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 157.570154] Skipping EDID probe due to cached edid [ 157.591512] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 157.651351] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 157.651936] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 157.722192] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 158.007043] ata1.00: configured for UDMA/133 [ 158.007048] ata1: EH complete [ 158.007254] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 158.156454] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600 [ 158.571282] usb 4-2: new full speed USB device using uhci_hcd and address 6 [ 164.136302] wlan0: authenticate with 00:1e:79:d6:01:10 (try 1) [ 164.139121] wlan0: authenticated [ 164.139195] wlan0: associate with 00:1e:79:d6:01:10 (try 1) [ 164.141506] wlan0: RX AssocResp from 00:1e:79:d6:01:10 (capab=0x421 status=0 aid=4) [ 164.141513] wlan0: associated [ 164.145185] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 174.690053] wlan0: no IPv6 routers present [ 4253.081279] iwlagn 0000:03:00.0: queue 2 stuck 3 time. Fw reload. [ 4253.081289] iwlagn 0000:03:00.0: On demand firmware reload [ 6107.802749] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 6421.391821] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 7222.261480] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 7222.647933] Initializing USB Mass Storage driver... [ 7222.648082] scsi4 : usb-storage 2-1:1.0 [ 7222.648173] usbcore: registered new interface driver usb-storage [ 7222.648176] USB Mass Storage support registered. [ 7223.643619] scsi 4:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [ 7223.645146] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 7223.660476] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 7245.984789] Monitor-Mwait will be used to enter C-3 state [ 7245.989150] thinkpad_acpi: EC reports that Thermal Table has changed [ 7246.006124] ata1.00: configured for UDMA/133 [ 7246.006128] ata1: EH complete [ 7246.006283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7246.131424] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [38267.706753] usb 2-1: USB disconnect, address 2 [40662.771714] thinkpad_acpi: EC reports that Thermal Table has changed [40664.198632] ata1.00: configured for UDMA/133 [40664.198636] ata1: EH complete [40664.198749] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [40664.277770] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600 [40671.468394] ata1.00: configured for UDMA/133 [40671.468399] ata1: EH complete [40671.468591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [40671.507975] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [40672.291340] usb 4-2: USB disconnect, address 6 [40672.291550] btusb_intr_complete: hci0 urb ffff8801133503c0 failed to resubmit (19) [40672.291559] btusb_bulk_complete: hci0 urb ffff880113350a80 failed to resubmit (19) [40672.292550] btusb_bulk_complete: hci0 urb ffff880113350cc0 failed to resubmit (19) [40672.292840] btusb_send_frame: hci0 urb ffff8801326cf300 submission failed [40672.540289] wlan0: deauthenticating from 00:1e:79:d6:01:10 by local choice (reason=3) [40672.560561] cfg80211: All devices are disconnected, going to restore regulatory settings [40672.560567] cfg80211: Restoring regulatory settings [40672.560571] cfg80211: Calling CRDA to update world regulatory domain [40672.573561] cfg80211: World regulatory domain updated: [40672.573564] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [40672.573567] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [40672.573571] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [40672.573573] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [40672.573576] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [40672.573579] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [40672.875976] PM: Syncing filesystems ... done. [40672.880130] PM: Preparing system for mem sleep [40673.420352] Freezing user space processes ... (elapsed 0.02 seconds) done. [40673.450115] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [40673.470033] PM: Entering mem sleep [40673.470129] Suspending console(s) (use no_console_suspend to debug) [40673.470892] sd 0:0:0:0: [sda] Synchronizing SCSI cache [40673.470932] sd 0:0:0:0: [sda] Stopping disk [40673.486879] serial 00:0a: disabled [40673.487392] ehci_hcd 0000:00:1d.7: PCI INT D disabled [40673.487404] uhci_hcd 0000:00:1d.2: PCI INT C disabled [40673.487415] uhci_hcd 0000:00:1d.1: PCI INT B disabled [40673.487427] uhci_hcd 0000:00:1d.0: PCI INT A disabled [40673.487433] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [40673.487466] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [40673.487722] uhci_hcd 0000:00:1a.2: PCI INT C disabled [40673.487747] uhci_hcd 0000:00:1a.0: PCI INT A disabled [40673.487820] ACPI handle has no context! [40673.487938] e1000e 0000:00:19.0: PME# enabled [40673.487949] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [40673.491299] uhci_hcd 0000:00:1a.1: PCI INT B disabled [40673.501295] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [40673.510069] i915 0000:00:02.0: power state changed by ACPI to D3 [40673.520025] ehci_hcd 0000:00:1a.7: PCI INT D disabled [40673.581380] PM: suspend of drv:sd dev:0:0:0:0 complete after 110.491 msecs [40673.581391] PM: suspend of drv:scsi dev:target0:0:0 complete after 110.461 msecs [40673.581400] PM: suspend of drv:scsi dev:host0 complete after 110.385 msecs [40673.591601] HDA Intel 0000:00:1b.0: PCI INT B disabled [40673.611265] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 123.793 msecs [40673.641265] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 153.900 msecs [40673.641275] PM: suspend of drv: dev:pci0000:00 complete after 153.142 msecs [40673.641284] PM: suspend of devices complete after 170.784 msecs [40673.641286] PM: suspend devices took 0.170 seconds [40673.680072] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [40673.700068] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [40673.740068] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [40673.760068] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [40673.830057] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [40673.830195] PM: late suspend of devices complete after 188.905 msecs [40673.930060] ACPI: Preparing to enter system sleep state S3 [40674.310095] PM: Saving platform NVS memory [40674.322484] Disabling non-boot CPUs ... [40674.350133] Broke affinity for irq 19 [40674.460032] CPU 1 is now offline [40674.460036] SMP alternatives: switching to UP code [40674.468868] Extended CMOS year: 2000 [40674.468868] Back to C! [40674.468868] PM: Restoring platform NVS memory [40674.468868] Extended CMOS year: 2000 [40674.468868] Enabling non-boot CPUs ... [40674.468868] SMP alternatives: switching to SMP code [40674.477424] Booting Node 0 Processor 1 APIC 0x1 [40674.700515] CPU1 is up [40674.702074] ACPI: Waking up from system sleep state S3 [40675.521473] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [40675.521501] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [40675.521514] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [40675.521537] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [40675.631308] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [40675.651317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [40675.651347] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [40675.671317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [40675.691317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [40675.691322] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.716 msecs [40675.691354] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [40675.711317] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [40675.731317] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [40675.731347] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [40675.751317] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [40675.771316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [40675.771357] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [40675.791316] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [40675.811316] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [40675.811359] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [40675.811401] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021) [40675.811407] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc010c000) [40675.811412] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) [40675.811425] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [40675.811482] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041) [40675.811489] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x4040) [40675.811501] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [40675.811569] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [40675.831317] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [40675.851316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [40675.851346] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [40675.871316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [40675.891316] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [40675.891349] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [40675.891391] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [40675.891439] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [40675.911317] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [40675.931316] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [40675.931331] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [40675.931343] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [40675.931348] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [40675.931354] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [40675.931366] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [40675.931464] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [40675.931601] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [40675.931991] PM: early resume of devices complete after 410.638 msecs [40675.941328] i915 0000:00:02.0: power state changed by ACPI to D0 [40675.941374] i915 0000:00:02.0: power state changed by ACPI to D0 [40675.941379] i915 0000:00:02.0: setting latency timer to 64 [40675.941429] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [40675.941434] e1000e 0000:00:19.0: PME# disabled [40675.941511] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [40675.943643] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [40675.943650] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [40675.943676] usb usb4: root hub lost power or was reset [40675.943774] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [40675.943781] HDA Intel 0000:00:1b.0: setting latency timer to 64 [40675.943821] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [40675.943857] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [40675.943863] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [40675.943869] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [40675.943915] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [40675.943922] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [40675.943947] usb usb7: root hub lost power or was reset [40675.943971] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [40675.943977] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [40675.944001] usb usb8: root hub lost power or was reset [40675.944063] pci 0000:00:1e.0: setting latency timer to 64 [40675.944080] ahci 0000:00:1f.2: setting latency timer to 64 [40675.944545] sd 0:0:0:0: [sda] Starting disk [40675.955853] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [40675.956038] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [40675.956184] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [40675.956303] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [40675.956456] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [40675.956464] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [40675.956472] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [40675.956496] usb usb5: root hub lost power or was reset [40675.956510] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [40675.956836] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [40675.956842] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [40675.956849] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [40675.956862] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [40675.956888] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [40675.956895] usb usb3: root hub lost power or was reset [40675.956898] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [40675.957458] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [40675.957463] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [40675.957466] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [40675.957469] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [40675.957474] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [40675.957477] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [40675.957507] usb usb6: root hub lost power or was reset [40675.976456] serial 00:0a: activated [40676.120057] PM: resume of drv:usb dev:usb5 complete after 175.752 msecs [40676.120080] PM: resume of drv:usb dev:usb7 complete after 175.710 msecs [40676.120091] PM: resume of drv:hub dev:5-0:1.0 complete after 175.770 msecs [40676.120099] PM: resume of drv:hub dev:7-0:1.0 complete after 175.709 msecs [40676.120124] PM: resume of drv:usb dev:usb8 complete after 175.718 msecs [40676.120128] PM: resume of drv:usb dev:usb6 complete after 175.791 msecs [40676.120133] PM: resume of drv:hub dev:8-0:1.0 complete after 175.705 msecs [40676.120137] PM: resume of drv:hub dev:6-0:1.0 complete after 175.784 msecs [40676.120156] PM: resume of drv:usb dev:usb3 complete after 175.924 msecs [40676.120187] PM: resume of drv:hub dev:3-0:1.0 complete after 175.938 msecs [40676.130201] PM: resume of drv:i915 dev:0000:00:02.0 complete after 188.920 msecs [40676.140042] PM: resume of drv:usb dev:usb1 complete after 195.878 msecs [40676.140072] PM: resume of drv:hub dev:1-0:1.0 complete after 195.889 msecs [40676.140102] PM: resume of drv: dev:ep_81 complete after 163.214 msecs [40676.230042] PM: resume of drv:usb dev:usb4 complete after 285.777 msecs [40676.230075] PM: resume of drv:hub dev:4-0:1.0 complete after 285.788 msecs [40676.260029] usb 1-6: reset high speed USB device using ehci_hcd and address 4 [40676.291578] ata2: SATA link down (SStatus 0 SControl 300) [40676.291602] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [40676.292071] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [40676.292076] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [40676.292080] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [40676.292832] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [40676.292835] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [40676.292838] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [40676.293074] ata1.00: configured for UDMA/133 [40676.320842] ata1.00: configured for UDMA/133 [40676.320845] ata1: EH complete [40676.320975] PM: resume of drv:sd dev:0:0:0:0 complete after 376.425 msecs [40676.321000] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 376.408 msecs [40676.407104] PM: resume of drv:usb dev:1-6 complete after 462.659 msecs [40676.407118] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 462.640 msecs [40676.407137] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 462.675 msecs [40676.407168] PM: resume of drv: dev:ep_81 complete after 174.117 msecs [40676.520029] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [40676.677078] PM: resume of drv:usb dev:4-1 complete after 732.563 msecs [40676.677110] PM: resume of drv:usb dev:4-1:1.0 complete after 732.578 msecs [40676.677140] PM: resume of drv: dev:ep_81 complete after 269.940 msecs [40676.680092] PM: resume of devices complete after 748.046 msecs [40676.680276] PM: resume devices took 0.750 seconds [40676.680307] PM: Finishing wakeup. [40676.680308] Restarting tasks ... done. [40676.696781] video LNXVIDEO:00: Restoring backlight state [40676.801476] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [40676.881592] Skipping EDID probe due to cached edid [40676.911511] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [40676.971350] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [40676.971932] ADDRCONF(NETDEV_UP): eth0: link is not ready [40677.042279] ADDRCONF(NETDEV_UP): wlan0: link is not ready [40677.422608] ata1.00: configured for UDMA/133 [40677.422613] ata1: EH complete [40677.422799] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [40677.561593] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [40677.562167] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [40677.566213] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600 [40677.821273] usb 4-2: new full speed USB device using uhci_hcd and address 7 [40683.312192] wlan0: authenticate with 00:3a:98:4d:3d:b0 (try 1) [40683.318504] wlan0: authenticated [40683.318580] wlan0: associate with 00:3a:98:4d:3d:b0 (try 1) [40683.323047] wlan0: RX AssocResp from 00:3a:98:4d:3d:b0 (capab=0x421 status=0 aid=24) [40683.323055] wlan0: associated [40683.330509] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [40694.170236] wlan0: no IPv6 routers present [41177.848806] CE: hpet increased min_delta_ns to 7500 nsec [41821.170388] wlan0: deauthenticating from 00:3a:98:4d:3d:b0 by local choice (reason=3) [41821.177621] cfg80211: All devices are disconnected, going to restore regulatory settings [41821.177635] cfg80211: Restoring regulatory settings [41821.177645] cfg80211: Calling CRDA to update world regulatory domain [41821.182571] cfg80211: World regulatory domain updated: [41821.182578] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [41821.182586] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [41821.182593] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [41821.182600] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [41821.182607] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [41821.182613] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [41821.202753] wlan0: authenticate with 00:3a:98:53:f3:80 (try 1) [41821.400286] wlan0: authenticate with 00:3a:98:53:f3:80 (try 2) [41821.600278] wlan0: authenticate with 00:3a:98:53:f3:80 (try 3) [41821.800266] wlan0: authentication with 00:3a:98:53:f3:80 timed out [41834.366891] wlan0: authenticate with 00:3a:98:4d:3d:b0 (try 1) [41834.373594] wlan0: authenticated [41834.373651] wlan0: associate with 00:3a:98:4d:3d:b0 (try 1) [41834.378323] wlan0: RX AssocResp from 00:3a:98:4d:3d:b0 (capab=0x421 status=0 aid=24) [41834.378331] wlan0: associated [43398.131313] CE: hpet increased min_delta_ns to 11250 nsec [43981.143003] wlan0: deauthenticating from 00:3a:98:4d:3d:b0 by local choice (reason=3) [43981.172522] cfg80211: All devices are disconnected, going to restore regulatory settings [43981.172534] cfg80211: Restoring regulatory settings [43981.172541] cfg80211: Calling CRDA to update world regulatory domain [43981.173569] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [43981.176707] wlan0: authenticated [43981.176757] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [43981.180458] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=5) [43981.180466] wlan0: associated [43981.182554] cfg80211: World regulatory domain updated: [43981.182557] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [43981.182560] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43981.182563] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [43981.182566] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [43981.182569] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43981.182572] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [44043.946177] ata1.00: configured for UDMA/133 [44043.946181] ata1: EH complete [44043.946301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [44044.051518] thinkpad_acpi: EC reports that Thermal Table has changed [44046.284376] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [44239.128191] lo: Disabled Privacy Extensions [44936.502220] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0 [45661.170229] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [45661.196012] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 1) [45661.391407] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 2) [45661.591408] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 3) [45661.791309] wlan0: authentication with 00:3a:98:54:0c:b0 timed out [45674.506870] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [45674.509289] wlan0: authenticated [45674.509336] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [45674.515815] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=5) [45674.515823] wlan0: associated [46141.340236] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [46141.344857] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 1) [46141.541314] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 2) [46141.741301] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 3) [46141.941305] wlan0: authentication with 00:3a:98:54:0c:b0 timed out [46154.453333] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [46154.456835] wlan0: authenticated [46154.456885] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [46154.461781] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=5) [46154.461789] wlan0: associated [46497.253102] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [47534.028788] Skipping EDID probe due to cached edid [53581.160289] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [53581.165019] wlan0: authenticate with 00:3a:98:65:cb:40 (try 1) [53581.168393] wlan0: authenticated [53581.201229] wlan0: associate with 00:3a:98:65:cb:40 (try 1) [53581.204633] wlan0: RX AssocResp from 00:3a:98:65:cb:40 (capab=0x421 status=0 aid=22) [53581.204642] wlan0: associated [53701.241421] wlan0: deauthenticating from 00:3a:98:65:cb:40 by local choice (reason=3) [53701.275249] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [53701.278865] wlan0: authenticated [53701.278911] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [53701.282330] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=5) [53701.282339] wlan0: associated [55578.387546] thinkpad_acpi: EC reports that Thermal Table has changed [55580.009904] ata1.00: configured for UDMA/133 [55580.009909] ata1: EH complete [55580.010370] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [55580.067034] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600 [55592.290751] ata1.00: configured for UDMA/133 [55592.290761] ata1: EH complete [55592.291179] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [55592.356894] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [55593.040136] usb 4-2: USB disconnect, address 7 [55593.041110] btusb_intr_complete: hci0 urb ffff8800bc8c3600 failed to resubmit (19) [55593.041132] btusb_bulk_complete: hci0 urb ffff8800bc8c3840 failed to resubmit (19) [55593.041149] btusb_bulk_complete: hci0 urb ffff8800bc8c3b40 failed to resubmit (19) [55593.042553] btusb_send_frame: hci0 urb ffff880132862c00 submission failed [55593.220231] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [55593.250628] cfg80211: All devices are disconnected, going to restore regulatory settings [55593.250636] cfg80211: Restoring regulatory settings [55593.250641] cfg80211: Calling CRDA to update world regulatory domain [55593.254597] cfg80211: World regulatory domain updated: [55593.254603] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [55593.254611] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [55593.254619] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [55593.254626] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [55593.254632] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [55593.254639] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [55593.530840] PM: Syncing filesystems ... done. [55593.537096] PM: Preparing system for mem sleep [55594.530106] Skipping EDID probe due to cached edid [55595.510345] Freezing user space processes ... (elapsed 0.02 seconds) done. [55595.531385] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [55595.551374] PM: Entering mem sleep [55595.551449] Suspending console(s) (use no_console_suspend to debug) [55595.591598] sd 0:0:0:0: [sda] Synchronizing SCSI cache [55595.591654] sd 0:0:0:0: [sda] Stopping disk [55595.608808] serial 00:0a: disabled [55595.609255] ehci_hcd 0000:00:1d.7: PCI INT D disabled [55595.609267] uhci_hcd 0000:00:1d.2: PCI INT C disabled [55595.609278] uhci_hcd 0000:00:1d.1: PCI INT B disabled [55595.609290] uhci_hcd 0000:00:1d.0: PCI INT A disabled [55595.609297] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [55595.609306] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [55595.609387] uhci_hcd 0000:00:1a.2: PCI INT C disabled [55595.609424] uhci_hcd 0000:00:1a.0: PCI INT A disabled [55595.609576] ACPI handle has no context! [55595.609619] e1000e 0000:00:19.0: PME# enabled [55595.609641] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [55595.610057] uhci_hcd 0000:00:1a.1: PCI INT B disabled [55595.620068] i915 0000:00:02.0: power state changed by ACPI to D3 [55595.620120] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [55595.630028] ehci_hcd 0000:00:1a.7: PCI INT D disabled [55595.701075] PM: suspend of drv:sd dev:0:0:0:0 complete after 109.481 msecs [55595.701085] PM: suspend of drv:scsi dev:target0:0:0 complete after 109.420 msecs [55595.701096] PM: suspend of drv:scsi dev:host0 complete after 109.358 msecs [55595.711609] HDA Intel 0000:00:1b.0: PCI INT B disabled [55595.731265] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 121.952 msecs [55595.761266] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 152.038 msecs [55595.761277] PM: suspend of drv: dev:pci0000:00 complete after 151.579 msecs [55595.761284] PM: suspend of devices complete after 209.446 msecs [55595.761286] PM: suspend devices took 0.210 seconds [55595.800078] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [55595.820071] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [55595.870068] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [55595.890067] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [55595.960061] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [55595.960212] PM: late suspend of devices complete after 198.922 msecs [55596.060061] ACPI: Preparing to enter system sleep state S3 [55596.440097] PM: Saving platform NVS memory [55596.453057] Disabling non-boot CPUs ... [55596.481672] kvm: disabling virtualization on CPU1 [55596.590032] CPU 1 is now offline [55596.590036] SMP alternatives: switching to UP code [55596.598861] Extended CMOS year: 2000 [55596.598861] Back to C! [55596.598861] PM: Restoring platform NVS memory [55596.598861] Extended CMOS year: 2000 [55596.598861] Enabling non-boot CPUs ... [55596.598861] SMP alternatives: switching to SMP code [55596.608557] Booting Node 0 Processor 1 APIC 0x1 [55596.770176] kvm: enabling virtualization on CPU1 [55596.991353] CPU1 is up [55596.992912] ACPI: Waking up from system sleep state S3 [55597.503072] thinkpad_acpi: EC reports that Thermal Table has changed [55597.941480] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [55597.941509] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [55597.941522] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [55597.941546] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [55598.051309] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [55598.071321] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [55598.071352] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [55598.091317] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [55598.111321] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [55598.111326] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.711 msecs [55598.111357] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [55598.131320] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [55598.151319] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [55598.151348] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [55598.171320] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [55598.191316] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [55598.191357] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [55598.211319] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [55598.231319] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [55598.231363] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [55598.231407] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc031c021) [55598.231413] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc010c000) [55598.231419] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) [55598.231431] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [55598.231489] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041) [55598.231496] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x4040) [55598.231509] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [55598.231577] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [55598.251317] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [55598.271318] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [55598.271348] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [55598.291318] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [55598.311319] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [55598.311353] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [55598.311394] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [55598.311442] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [55598.331321] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [55598.351317] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [55598.351331] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [55598.351344] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [55598.351350] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [55598.351355] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [55598.351367] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [55598.351466] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [55598.351603] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [55598.351997] PM: early resume of devices complete after 410.639 msecs [55598.361390] i915 0000:00:02.0: power state changed by ACPI to D0 [55598.361436] i915 0000:00:02.0: power state changed by ACPI to D0 [55598.361441] i915 0000:00:02.0: setting latency timer to 64 [55598.361508] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [55598.361514] e1000e 0000:00:19.0: PME# disabled [55598.361591] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [55598.363727] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [55598.363734] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [55598.363760] usb usb4: root hub lost power or was reset [55598.363865] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [55598.363872] HDA Intel 0000:00:1b.0: setting latency timer to 64 [55598.363912] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [55598.363950] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [55598.363957] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [55598.363963] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [55598.364011] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [55598.364018] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [55598.364043] usb usb7: root hub lost power or was reset [55598.364067] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [55598.364073] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [55598.364099] usb usb8: root hub lost power or was reset [55598.364161] pci 0000:00:1e.0: setting latency timer to 64 [55598.364178] ahci 0000:00:1f.2: setting latency timer to 64 [55598.364651] sd 0:0:0:0: [sda] Starting disk [55598.376249] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [55598.376722] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [55598.376795] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [55598.376807] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [55598.377037] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [55598.377474] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [55598.377482] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [55598.377485] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [55598.377488] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [55598.377494] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [55598.377497] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [55598.377528] usb usb3: root hub lost power or was reset [55598.377530] usb usb5: root hub lost power or was reset [55598.377560] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [55598.377566] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [55598.377569] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [55598.377572] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [55598.377577] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [55598.377580] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [55598.377608] usb usb6: root hub lost power or was reset [55598.377705] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [55598.377713] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [55598.377719] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [55598.395561] serial 00:0a: activated [55598.540062] PM: resume of drv:usb dev:usb3 complete after 175.727 msecs [55598.540085] PM: resume of drv:usb dev:usb8 complete after 175.575 msecs [55598.540094] PM: resume of drv:hub dev:3-0:1.0 complete after 175.744 msecs [55598.540102] PM: resume of drv:hub dev:8-0:1.0 complete after 175.572 msecs [55598.540107] PM: resume of drv:usb dev:usb7 complete after 175.635 msecs [55598.540131] PM: resume of drv:usb dev:usb6 complete after 175.693 msecs [55598.540144] PM: resume of drv:hub dev:6-0:1.0 complete after 175.689 msecs [55598.540151] PM: resume of drv:hub dev:7-0:1.0 complete after 175.659 msecs [55598.540155] PM: resume of drv:usb dev:usb5 complete after 175.751 msecs [55598.540171] PM: resume of drv:hub dev:5-0:1.0 complete after 175.750 msecs [55598.550205] PM: resume of drv:i915 dev:0000:00:02.0 complete after 188.865 msecs [55598.560043] PM: resume of drv:usb dev:usb1 complete after 195.780 msecs [55598.560075] PM: resume of drv:hub dev:1-0:1.0 complete after 195.793 msecs [55598.560106] PM: resume of drv: dev:ep_81 complete after 164.120 msecs [55598.650044] PM: resume of drv:usb dev:usb4 complete after 285.678 msecs [55598.650076] PM: resume of drv:hub dev:4-0:1.0 complete after 285.687 msecs [55598.680047] usb 1-6: reset high speed USB device using ehci_hcd and address 4 [55598.711308] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [55598.711330] ata2: SATA link down (SStatus 0 SControl 300) [55598.711769] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [55598.711773] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [55598.711776] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [55598.712509] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [55598.712512] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [55598.712515] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [55598.712767] ata1.00: configured for UDMA/133 [55598.737407] ata1.00: configured for UDMA/133 [55598.737410] ata1: EH complete [55598.737514] PM: resume of drv:sd dev:0:0:0:0 complete after 372.858 msecs [55598.737523] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 372.826 msecs [55598.825453] PM: resume of drv:usb dev:1-6 complete after 460.906 msecs [55598.825468] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 460.886 msecs [55598.825486] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 460.921 msecs [55598.825518] PM: resume of drv: dev:ep_81 complete after 172.422 msecs [55598.941321] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [55599.096343] PM: resume of drv:usb dev:4-1 complete after 731.722 msecs [55599.096375] PM: resume of drv:usb dev:4-1:1.0 complete after 731.737 msecs [55599.096406] PM: resume of drv: dev:ep_81 complete after 270.853 msecs [55599.099380] PM: resume of devices complete after 747.329 msecs [55599.099660] PM: resume devices took 0.740 seconds [55599.099691] PM: Finishing wakeup. [55599.099692] Restarting tasks ... done. [55599.120850] video LNXVIDEO:00: Restoring backlight state [55599.232987] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [55599.397031] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [55599.451367] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [55599.453012] ADDRCONF(NETDEV_UP): eth0: link is not ready [55599.542134] ADDRCONF(NETDEV_UP): wlan0: link is not ready [55599.867499] ata1.00: configured for UDMA/133 [55599.867504] ata1: EH complete [55599.901594] Skipping EDID probe due to cached edid [55599.930118] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [55600.304952] ata1.00: configured for UDMA/133 [55600.304956] ata1: EH complete [55600.321326] usb 4-2: new full speed USB device using uhci_hcd and address 8 [55600.481953] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0 [55605.726892] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [55605.730812] wlan0: authenticated [55605.730862] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [55605.734597] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=14) [55605.734605] wlan0: associated [55605.738682] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [55616.490022] wlan0: no IPv6 routers present [56453.038401] Skipping EDID probe due to cached edid [57344.610366] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [57344.613853] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 1) [57344.811401] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 2) [57345.011328] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 3) [57345.220103] wlan0: authentication with 00:3a:98:54:0c:b0 timed out [57357.811780] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [57358.010049] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 2) [57358.012806] wlan0: authenticated [57358.012833] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [57358.016677] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=14) [57358.016680] wlan0: associated [58305.020230] wlan0: deauthenticating from 00:3a:98:4d:56:e0 by local choice (reason=3) [58305.024746] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 1) [58305.221295] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 2) [58305.420050] wlan0: authenticate with 00:3a:98:54:0c:b0 (try 3) [58305.620128] wlan0: authentication with 00:3a:98:54:0c:b0 timed out [58318.124742] wlan0: authenticate with 00:3a:98:4d:56:e0 (try 1) [58318.129955] wlan0: authenticated [58318.130005] wlan0: associate with 00:3a:98:4d:56:e0 (try 1) [58318.133944] wlan0: RX AssocResp from 00:3a:98:4d:56:e0 (capab=0x421 status=0 aid=14) [58318.133953] wlan0: associated