meta bug to collect lshal touchscreen info

Bug #317094 reported by Oliver Grawert
316
This bug affects 44 people
Affects Status Importance Assigned to Milestone
xf86-input-evtouch (Ubuntu)
Won't Fix
Undecided
marwan
Declined for Dapper by Oliver Grawert
Declined for Hardy by Oliver Grawert
Declined for Intrepid by Oliver Grawert
Declined for Jaunty by Oliver Grawert
Declined for Karmic by Oliver Grawert

Bug Description

This bug is used to collect the lshal info people are asked to submit when evtouch calibration fails.
Formerly this collection was done via the ubuntu-mobile mailing list, which is a subscription only list and the traffic of submissions from unsunscribed people got to much of a maintenance burden for the list admins.

Tags: omit
Revision history for this message
Bryce Harrington (bryce) wrote :

Hi ogra,

Please attach the output of `lspci -vvnn`, and attach your /var/log/Xorg.0.log file from after reproducing this issue. If you've made any customizations to your /etc/X11/xorg.conf please attach that as well.

Please attach the output of `lspci -vvnn` too.

[This is an automated message. If this script has reached you erroneously, please accept our apologies; any reply to this message will be sufficient to prevent it from doing further automated processing.]

Changed in xf86-input-evtouch:
status: New → Incomplete
Revision history for this message
Oliver Grawert (ogra) wrote :

setting to confirmed, so we dont get more automated messages from bryce ;)

Changed in xf86-input-evtouch:
status: Incomplete → Confirmed
Revision history for this message
Myriam Schweingruber (myriam) wrote :

Find below lshal output for the General Touch rear mount touchscreen, RTL 153. I'm currently working on the calibration with an external driver made for OpenSuSE which is not very precise, more to follow.

udi = '/org/freedesktop/Hal/devices/usb_device_dfc_1_noserial_if0_logicaldev_input'
  button.has_state = false (bool)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button', 'input.mouse'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_dfc_1_noserial_if0' (string)
  info.product = 'General Touch Co. Ltd. GeneralTouch USB Touchscreen' (string)
  info.subsystem = 'input' (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_dfc_1_noserial_if0_logicaldev_input' (string)
  input.device = '/dev/input/event8' (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_dfc_1_noserial_if0' (string)
  input.product = 'General Touch Co. Ltd. GeneralTouch USB Touchscreen' (string)
  input.x11_driver = 'evdev' (string)
  linux.device_file = '/dev/input/event8' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'input' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input8/event8' (string)

Revision history for this message
ehroure (ehroure) wrote :

Trying to calibrate asus r2h touchscreen get the message to send you the file.

Best Regards

Revision history for this message
claudio (private-claudio) wrote :

The attached lshal output is for a Tabletkiosk Sahara TouchIT-213 Tablet PC.

Revision history for this message
LeeClean (bsdkorea) wrote :

Hi,

attached lshal output is for Fujitsu LifeBook U1010 (on Ubuntu 9.04 Jaunty)

Revision history for this message
GaardenZwerch (frank-weis) wrote :

Hi,

please find attached the output for an Asus EEETop

Thanks a lot

Frank

Revision history for this message
dedraks (dedraks) wrote :

Hello,

Plz find attached output for LG-C1 Tablet PC model C1-TP81P1

Thanks
Carlos Garcia

Revision history for this message
Tiago Rezende Campos Falcão (tiagofalcao) wrote :

Attached hal output.

Thanks

Revision history for this message
labiloute (labiloute) wrote :

Here's the lshal output from a Fujitsu Siemens Lifebook P1610
It didn't work since 8.04 i'm now with dvpt's jaunty
cheers

Revision history for this message
Kevin Williams (bthylafh) wrote :

Here's the lshal output from a Gateway M275 tablet, which isn't compatible at this point.

Revision history for this message
Trantor (w1ost) wrote :

Tablet Netbook Gigabyte M912X

Revision history for this message
cpechereau (cpechereau) wrote :

Hi
Please find attached lshal output for Samsung Q1.
calibration failled.
touch screen works pretty good with Ubuntu 8.10 and 9.04 beta but there is a little shift on screen I like corrected
Christian
Rennes, France

Revision history for this message
Lionel Dricot (ploum-deactivatedaccount) wrote :

lshal for Xenarc 7" 706 series described in bug #276302

Revision history for this message
Lionel Dricot (ploum-deactivatedaccount) wrote :

lshal for Chinese eGalax no-mark touchscreen (1-DIN automative box)

Revision history for this message
Ricardo Rodrigues (rj-rodrigues-gmail) wrote :

my laptop: hp tx2000ep

Revision history for this message
mlanders (matthew-landers) wrote :
Revision history for this message
flippenflappen (finlandfilm) wrote :

lshal for Fujitsu p1620 under Ubuntu 904 netbook remix beta

Revision history for this message
Lionel ROUX (lionel-roux-ac-grenoble) wrote :

Hi,
My laptop is an We Surf send by Fnac in France. It-s an derivative of Samsung Clevo.
Thank-s

Revision history for this message
ni-m (nimitch) wrote :

lshal from an ancient itronix gobook ix250 with a GUNZE TouchPanel (usb)

it seems to be using the synaptics driver at the moment

from Xorg.0.log

profile 0
[ 7.382092] (--) SynPS/2 Synaptics TouchPad touchpad found
[ 7.387278] (II) config/hal: Adding input device GUNZE GUNZE Touch Panel
[ 7.387406] (II) Synaptics touchpad driver version 0.99.3
[ 7.387453] (**) Option "Device" "/dev/input/event5"
[ 7.387745] (--) GUNZE GUNZE Touch Panel: no supported touchpad found
[ 7.387783] (**) GUNZE GUNZE Touch Panel: always reports core events
[ 7.387898] (II) XINPUT: Adding extended input device "GUNZE GUNZE Touch Panel" (type: TOUCHPAD)
[ 7.387982] (**) GUNZE GUNZE Touch Panel: (accel) keeping acceleration scheme 1
[ 7.388010] (**) GUNZE GUNZE Touch Panel: (accel) filter chain progression: 2.00
[ 7.388052] (**) GUNZE GUNZE Touch Panel: (accel) filter stage 0: 20.00 ms
[ 7.388100] (**) GUNZE GUNZE Touch Panel: (accel) set acceleration profile 0
[ 7.388629] (--) GUNZE GUNZE Touch Panel: no supported touchpad found

Revision history for this message
ni-m (nimitch) wrote :

Oliver thanks to google and yourself i have this working
i seem to remember you were also collecting fdi for working touchscreens but cant find the page anymore :/

Revision history for this message
Fabián Rodríguez (magicfab) wrote :

Hello,

I am happy to report that the EloTouch 2639L screen works just fine with this driver. I now need the calibrate tool to work, so submitting the requested evtouch_hal.out

Revision history for this message
Fabián Rodríguez (magicfab) wrote :

The calibration tool now works but I still don't get proper coordinates. Oliver, thanks for the hints you provided. Here is the /usr/share/hal/fdi/policy/20thirdparty/50-elotouch.fdi file I used:

<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
  <device>
    <match key="info.product" contains="Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB Touchmonitor Interface">
      <match key="info.capabilities" contains="input">
        <merge key="input.x11_driver" type="string">evtouch</merge>
        <merge key="input.x11_options.minx" type="string">130</merge>
        <merge key="input.x11_options.miny" type="string">197</merge>
        <merge key="input.x11_options.maxx" type="string">3945</merge>
        <merge key="input.x11_options.maxy" type="string">3894</merge>
        <merge key="input.x11_options.swapx" type="string">1</merge>
        <merge key="input.x11_options.swapy" type="string">1</merge>
      </match>
    </match>
  </device>
</deviceinfo>

</deviceinfo>

I have an open bug specifically for this screen: Bug #362308 . I'll continue my tests there.

Revision history for this message
giuse (mayaclub) wrote :

lshal from Asus Eee TOP.
Now I must dawngrade the system to intrepid :-(

Revision history for this message
danmiddle2 (dmiddleton) wrote :

I am also having this issue with my Sony UX. It's a UX1XN. The touchscreen works with a clean install of Ubuntu 9.04, but is not calibrated and the calibration tools brings up the error to report here.

Revision history for this message
Martin Siegl (martin79315) wrote :

i'm trying to get the touchscreen on a panasonic cf-28 working.
no luck 'til now.

br
martin

Revision history for this message
giuse (mayaclub) wrote :

last lshal was from jaunty

Revision history for this message
Immanuel (immiraja) wrote :
Revision history for this message
Mysticode (david-leinbach) wrote :

lshal output for Sony UX VGN-380N

Revision history for this message
Munk (sebastian-starosielec) wrote :

Please find my hal output in the attached file.
Notebook is a Nexoc Osiris S621

The device seems to be /dev/usb/hiddev0, as it generates output on touching the screen.

Revision history for this message
stripeboy (bentsang) wrote :

lshal from viliv S5.

More information of this MID device:
http://www.myviliv.com/eng/product/s5.asp

Revision history for this message
Lasse Højgaard (lasse-hojgaard) wrote :

lshal output for a HP Mini 2140.

Revision history for this message
Ruben Grimm (rubengrimm-deactivatedaccount) wrote :

This is the output of my Asus Eee 900A. Have fun fixing. =)

Revision history for this message
dlhall (hall-shaw) wrote :
Revision history for this message
Chuck Bridgeland (chuckbri) wrote :

This is the output of lshal for a Nobilis Nobi, which is a tablet version of Intel's Classmate educational laptop. Running Ubuntu 9.04 netbook remix off a memory key, just to test it.

Revision history for this message
uno@michtech.net (uno-michtech) wrote :

Hi, attached lshal output is for Fujitsu LOOX P70R (based LifeBook U8210) (on Ubuntu 9.04 Jaunty)

Revision history for this message
sent (sentyboy+evtouch) wrote :

Hi, I try-ed to System > Manage > Calibrate Touchscreen on my Ubuntu 9.04 (as VMware on a Asus RE1 Tablet PC with Vista as OS) and it failed and requested to add my lshal in this thread.
Have a nice day!

Revision history for this message
Carlos Temes (ctemes) wrote :

Hi,

I've attached the lshal output from a Thermaltake DH-102 case that comes with a Soundgraph USB 7" touchscreen (id: 15c2:0034) in Ubuntu Jaunty.

It works with the evtouch driver but to get it properly configured as a touchscreen, the first time I had to remove the xserver-xorg-input-synaptics package. The calibration tool doesn't recognize the touchscreen.

Revision history for this message
Nodir (nodir3n2002) wrote :
Download full text (5.2 KiB)

udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial'
  info.linux.driver = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
  info.product = 'MASTouch USB Touchscreen' (string)
  info.subsystem = 'usb_device' (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial' (string)
  info.vendor = 'MASTouch TouchSystems' (string)
  linux.device_file = '/dev/bus/usb/003/002' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'usb' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
  usb_device.bus_number = 3 (0x3) (int)
  usb_device.can_wake_up = true (bool)
  usb_device.configuration = 'HID Touchscreen' (string)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.device_class = 0 (0x0) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_revision_bcd = 1 (0x1) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.is_self_powered = false (bool)
  usb_device.linux.device_number = 2 (0x2) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
  usb_device.max_power = 100 (0x64) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.num_interfaces = 1 (0x1) (int)
  usb_device.num_ports = 0 (0x0) (int)
  usb_device.product = 'MASTouch USB Touchscreen' (string)
  usb_device.product_id = 1 (0x1) (int)
  usb_device.speed = 1.5 (1.5) (double)
  usb_device.vendor = 'MASTouch TouchSystems' (string)
  usb_device.vendor_id = 3577 (0xdf9) (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0'
  info.linux.driver = 'usbhid' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial' (string)
  info.product = 'USB HID Interface' (string)
  info.subsystem = 'usb' (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'usb' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
  usb.bus_number = 3 (0x3) (int)
  usb.can_wake_up = true (bool)
  usb.configuration = 'HID Touchscreen' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.device_class = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.device_revision_bcd = 1 (0x1) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.interface.class = 3 (0x3) (int)
  usb.interface.number = 0 (0x0) (int)
  usb.interface.protocol = 2 (0x2) (int)
  usb.interface.subclass = 0 (0x0) (int)
  usb.is_self_powered = false (bool)
  usb.linux.device_number = 2 (0x2) (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
  usb.max_power = 100 (0x64) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 1 (0x1) (int)
  usb.num_ports = 0 (0x0) (int)
  usb.product = 'USB HID Interface' (string)
  usb.product_id = 1 (0x1) (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'MASTouch TouchSystems' (string)
  usb.vendor_id = 3577 (0xdf9) (int)
  usb....

Read more...

Revision history for this message
Kazuo Moriwaka (moriwaka-gmail) wrote :

attached is kohjinsha SH6KP10A lshal outout.

description: updated
description: updated
Ibagus (ibagusm)
description: updated
summary: - evtouch meta bug to collect lshal info
+ result of command "lshal"
Oliver Grawert (ogra)
summary: - result of command "lshal"
+ meta bug to collect lshal touchscreen info
description: updated
summary: - meta bug to collect lshal touchscreen info
+ result of command "lshal"
Oliver Grawert (ogra)
summary: - result of command "lshal"
+ meta bug to collect lshal touchscreen info
leonid (leonid-gorski)
description: updated
summary: - meta bug to collect lshal touchscreen info
+ Calibration error for the sony vgn-ux1xrn
Oliver Grawert (ogra)
summary: - Calibration error for the sony vgn-ux1xrn
+ meta bug to collect lshal touchscreen info
description: updated
Changed in xf86-input-evtouch (Ubuntu):
status: Confirmed → New
marwan (mhalhalabi)
Changed in xf86-input-evtouch (Ubuntu):
assignee: nobody → marwan (mhalhalabi)
149 comments hidden view all 229 comments
Revision history for this message
Prophet (peter-vanb) wrote :

I've added the evtouch_hal.out for the multitouch monitor iiyama ProLite T2250MTS.

Revision history for this message
Woko (wolfram-koehn) wrote :

Got it running with this: <http://ubuntuforums.org/showthread.php?t=1020019>.
I only had to change the match-string to: "3M 3M Touchscreen - EX II". Calibration still does not work, but wasn't required in my case.

Revision history for this message
Lasselo (lasselo) wrote :

I have Umid M1 and calibrate not working. I didnt manage to find that evtouch_hal.out -file via "search"-program.

Revision history for this message
nbkz (nebakaze) wrote :

ASUS EEEPC T91MT
uBuntu 9.10 Karmic (desktop-i386)

description: updated
Revision history for this message
Oliver Grawert (ogra) wrote :
Download full text (10.6 KiB)

Moved comment from Markus Haybach that falsely changed the bug description.

I solved my problem. Here comes the report:

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
 Subsystem: Device [1b7d:0002]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: <access denied>
 Kernel driver in use: agpgart-intel
 Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae]
(rev 03)
 Subsystem: Device [1b7d:0002]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at 96280000 (32-bit, non-prefetchable) [size=512K]
 Region 1: I/O ports at 50c0 [size=8]
 Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
 Region 3: Memory at 96300000 (32-bit, non-prefetchable) [size=256K]
 Capabilities: <access denied>
 Kernel driver in use: i915
 Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
 Subsystem: Device [1b7d:0002]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at 96200000 (32-bit, non-prefetchable) [size=512K]
 Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
 Subsystem: Device [1b7d:0002]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at 96340000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: <access denied>
 Kernel driver in use: HDA Intel
 Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00003000-00004fff
 Memory behind bridge: 95200000-961fffff
 Prefetchable memory behind bridge: 0000000090000000-00000000910fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport-driver
 ...

description: updated
Revision history for this message
igl9397 (igl9397) wrote :

Hi, I am having to make my touchscreen recognized on Thunder board and touch screen by Technexion. OS is ubuntu 9.10. Thanks!

Revision history for this message
Mi6 (mi6-humpme) wrote :

udi = '/org/freedesktop/Hal/devices/usb_device_408_3001_noserial'
  info.linux.driver = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_06_0' (string)
  info.product = 'Optical Touch Screen' (string)
  info.subsystem = 'usb_device' (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_408_3001_noserial' (string)
  info.vendor = 'Quanta Computer, Inc.' (string)
  linux.device_file = '/dev/bus/usb/004/003' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'usb' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/usb4/4-2' (string)
  usb_device.bus_number = 4 (0x4) (int)
  usb_device.can_wake_up = false (bool)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.device_class = 0 (0x0) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_revision_bcd = 0 (0x0) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.is_self_powered = false (bool)
  usb_device.linux.device_number = 3 (0x3) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/usb4/4-2' (string)
  usb_device.max_power = 500 (0x1f4) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.num_interfaces = 1 (0x1) (int)
  usb_device.num_ports = 0 (0x0) (int)
  usb_device.product = 'Optical Touch Screen' (string)
  usb_device.product_id = 12289 (0x3001) (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Quanta Computer, Inc.' (string)
  usb_device.vendor_id = 1032 (0x408) (int)
  usb_device.version = 1.1 (1.1) (double)

This is from a WindTop AE2220

numediacanada@numedia:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 0408:3001 Quanta Computer, Inc.
Bus 004 Device 002: ID 046d:c316 Logitech, Inc. HID-Compliant Keyboard
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 5986:0241 Acer, Inc
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Revision history for this message
Ted Striker (tedstriker73) wrote :

Hi. I cannot make the touchpad on my panasonic CF-T4 work. Enclosed are the required outputs. Help is appreciated. Thanks, Ted

Revision history for this message
BigDuke6 (peter-dukemedia) wrote :

Fujitsu Lifebook T1010D

Revision history for this message
Tôphe (christophe-regouby) wrote :

Hi,
"Calibrate Touchscreen" claims "no evtouch capable device" on the MSI WindTop AE2220 equiped with a USB Quanta Computer, Inc./ PixArt Imaging Inc. Optical Touch Screen at Bus 004 Device 003: ID 0408:3001

Thank you for your help!

mac-d (linux-kupkas)
tags: added: mac-d
tags: removed: mac-d
Revision history for this message
mac-d (linux-kupkas) wrote :
Revision history for this message
Rolf Håvard Blindheim (rhblind) wrote :

Attached output from lshal.
Touch works, but calibrate_touchscreen gives error about "no evtouch capable devices found..."

Revision history for this message
Kimos (sckimos) wrote :

Hi. Here is evtouch_hal.out .
Thanks.

Revision history for this message
Silke Meyer (sil-ke) wrote :

Hello! Here is the output of lshal on Fujitsu Siemens Lifebook B-2175 (Karmic Koala). Thank you.

Revision history for this message
stefano (sihtu) wrote :

evtouch_hal.out for Dell sx2210t

Revision history for this message
javier_10r (robert-6j) wrote :

Hi there here's y evtouch_hal.out for my hp touchsmart tx21275dx one question could I configure my touchscreen with your application to make clicks with the finger? and multitouch?

tags: added: patch
Revision history for this message
Larry Moore (ldmtwo) wrote :

I attached the evtouch_hal.out log file. This is for an HP Touchsmart 9100 Business.... Ubuntu 9.04 (March 29 2010)

Revision history for this message
Larry Moore (ldmtwo) wrote :

I attached the useless lspci log.
System: HP Touchsmart 9100 Business.... Ubuntu 9.04 (March 29 2010)

Revision history for this message
jvecchioli (v3cc-20) wrote :

Using a Dell Studio One 19
Touchscreen is reactive - `cat /dev/input/event9` displays random characters on the terminal

Revision history for this message
3rdear (kurt-3rdear) wrote :

Trying to calibrate Elo Touchsystems 2500U as second monitor input on USB, on Compaq Netbook Mini 110. Tried to modify xorg.conf to get touchscreen to work per example shown at http://www.backports.ubuntuforums.org/showthread.php?p=7929895 (which worked great for my desktop machine) but seems to be no use on the Netbook.

Revision history for this message
Piter Rashkin (rachpilpk) wrote :

Please add support Samsug SyncMaster LD220Z.

Revision history for this message
KevinM (kevinmcombes) wrote :

HP Touchsmart evtouch_hal.out

Revision history for this message
Arthur Bits (arthurbits) wrote :

Installed the driver according to: https://help.ubuntu.com/community/EloTouchScreen

I've got a Elo Touch 2700, in portrait mode, and trying to calibrate the screen, going into calibration i get the error:

"No evtouch capable device found, if you are sure you have an evtouch capable touchscreen, please mail the resulting file of the command ..."

So here I am, attaching the evtouch_hal.out file, thanks in advance for helping.

Revision history for this message
Bryce Harrington (bryce) wrote :

[This is an automatic notification.]

Hi Oliver,

This bug was reported against an earlier version of Ubuntu, can you
test if it still occurs on Lucid?

Please note we also provide technical support for older versions of
Ubuntu, but not in the bug tracker. Instead, to raise the issue through
normal support channels, please see:

    http://www.ubuntu.com/support

If you are the original reporter and can still reproduce the issue on
Lucid, please run the following command to refresh the report:

  apport-collect 317094

If you are not the original reporter, please file a new bug report, so
we can work with you as the original reporter instead (you can reference
bug 317094 in your report if you think it may be related):

  ubuntu-bug xorg

If by chance you can no longer reproduce the issue on Lucid or if you
feel it is no longer relevant, please mark the bug report 'Fix Released'
or 'Invalid' as appropriate, at the following URL:

  https://bugs.launchpad.net/ubuntu/+bug/317094

Changed in xf86-input-evtouch (Ubuntu):
status: New → Incomplete
tags: added: needs-retested-on-lucid-by-june
tags: removed: patch
Revision history for this message
Fabio Chalub (fabiochalub) wrote :

Evtouch not working - HP Elitebook 2730p

Revision history for this message
Nick Rahl (nrahl) wrote :

I have an Acer T230H. I've been unable to get it working on 9.10. I've attached my lshal output.

P.S. The "xf86-input-evtouch" package doesn't seem to exist anymore, I think it was renamed to something like: 'xserver-xorg-input-evtouch'.

Revision history for this message
hcmeyer (hcmeyer) wrote :

lshal output for a CTL 2go Intel Classmate NL2

Bryce Harrington (bryce)
tags: added: omit
removed: needs-retested-on-lucid-by-june
Revision history for this message
Hveem (krbjhvee) wrote :
Download full text (99.2 KiB)

Result from lshal > evtouch_hal.out for a Panasonic Toughbook CF-29HTM50BM

Dumping 105 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer' (string)
  info.subsystem = 'unknown' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer' (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  org.freedesktop.Hal.version = '0.5.13' (string)
  org.freedesktop.Hal.version.major = 0 (0x0) (int)
  org.freedesktop.Hal.version.micro = 13 (0xd) (int)
  org.freedesktop.Hal.version.minor = 5 (0x5) (int)
  power_management.acpi.linux.version = '20090521' (string)
  power_management.can_hibernate = true (bool)
  power_management.can_suspend = true (bool)
  power_management.can_suspend_hybrid = false (bool)
  power_management.is_powersave_set = false (bool)
  power_management.quirk.dpms_on = true (bool)
  power_management.quirk.dpms_suspend = true (bool)
  power_management.quirk.vbe_post = true (bool)
  power_management.quirk.vbemode_restore = true (bool)
  power_management.quirk.vbestate_restore = true (bool)
  power_management.quirk.vga_mode_3 = true (bool)
  power_management.type = 'acpi' (string)
  system.board.product = 'CF29-3' (string)
  system.board.serial = 'None' (string)
  system.board.vendor = 'Matsushita Electric Industrial Co.,Ltd.' (string)
  system.board.version = '001' (string)
  system.chassis.manufacturer = 'Matsushita Electric Industrial Co.,Ltd.' (string)
  system.chassis.type = 'Notebook' (string)
  system.firmware.release_date = '12/08/2004' (string)
  system.firmware.vendor = 'Phoenix Technologies K.K.' (string)
  system.firmware.version = 'V3.00L11' (string)
  system.formfactor = 'laptop' (string)
  system.hardware.primary_video.product = 13698 (0x3582) (int)
  system.hardware.primary_video.vendor = 32902 (0x8086) (int)
  system.hardware.product = 'CF-29HTM50BM' (string)
  system.hardware.serial = '5JKSB68106' (string)
  system.hardware.uuid = '00000000-0000-1000-8000-000B973266CA' (string)
  system.hardware.vendor = 'Matsushita Electric Industrial Co.,Ltd.' (string)
  system.hardware.version = '001' (string)
  system.kernel.machine = 'i686' (strin...

Revision history for this message
Bryce Harrington (bryce) wrote :

Thanks everyone who has posted to this bug report.

I acknowledge that calibration with evtouch is an unsolved problem. However, in Ubuntu we are planning to deprecate the -evtouch driver, as it is not well maintained upstream and long term plans are for -evdev to supplant its need (in the shorter term -wacom may be another option to consider). So I am closing this bug as a WONTFIX for Ubuntu; if people still wish to improve -evtouch I would encourage going upstream.

It's worth mentioning as well that Ubuntu no longer uses HAL. I suppose the data collected in this bug could be converted from HAL format to another form, but even looking through the files it's unclear that lshal output alone is sufficient to fix the calibration of the devices. So if the calibration issues still exist with -evdev or -wacom, those would need to be reported separately and with different data than what is provided here.

Aside from that, the quantity of attachments included in this bug report is causing Launchpad to oops on this bug, including scripts that we use for automated bug handling. I've spoken with Launchpad developers about this oops, but solving it is pretty intricate and not something that can be easily done.

Changed in xf86-input-evtouch (Ubuntu):
status: Incomplete → Won't Fix
1 comments hidden view all 229 comments
Revision history for this message
Cesar Ailhaud (cesar-logal-deactivatedaccount) wrote :

Netbook : LENOVO S10-3t
Touchscreen : CANDO 1015SCW
OS :
- Ubuntu Netbook Remix 10.04 : not working
- Jolicloud 1.0 : touchscreen works as a trackpad

Revision history for this message
Henrik Ekenberg (henrik-ekenberg) wrote :

Hej,

Result of :
lshal > evtouch_hal_PackardBell.out

Revision history for this message
Thomas Weissel (xapient) wrote :

Just some more information about this particular device:
Bus 001 Device 007: ID 15c2:3480 SoundGraph Inc.
FingerVu 706
Displaylink Touchscreen/IR USB Screen

http://ubuntuforums.org/showpost.php?p=10077429&postcount=8

no touchinput at all :(

Revision history for this message
sakis_ser (th-agorastos) wrote :

Flybook A33i's touchscreen and internal mouse do not work with Jolicloud (same goes with other linux distros except the Flybuntu which is a specifically modified Ubuntu 8 for Flybooks)

Revision history for this message
Codename: Steeve Knight (cnsknight) wrote :

ishal output MCI ??? running 9.10

Revision history for this message
WebNuLL (babciastefa) wrote :

@Piter Rashkin
There is a propertiary driver "nw-fermi" for LD220Z (NextWindow 1950).
Im using Samsung LD220Z right now, touchscreen works but only on singletouch (multitouch propably will be in some weeks)

Revision history for this message
Michael Franzl (michaelfranzl) wrote :

See attached lshal output for Hyundai G50TR touchscreen (seems to have the eGalax chip). The Linux kernel in Ubuntu 10.10 supports this device only partially. Clicking works but the cursor alsways jumps to the upper left corner.

Revision history for this message
Michael Franzl (michaelfranzl) wrote :

See attached lshal output for the Glancetron GT15plus touchscreen (seems to have the eGalax chip). The Linux kernel in Ubuntu 10.10 supports this device only partially. Clicking works but the cursor always jumps to the upper left corner. See also my previous comment.

Revision history for this message
David (dfkwild) wrote :

Elo Touch has published some generic Linux drivers/utilities for their touchscreens (some as recently as 15 Feb 2011), so perhaps some ability to work with that for elo screens

Revision history for this message
Pablo Riobo Mercedes Delgado (lasolea-khe) wrote :

lshal > evtouch_hal.out

Displaying first 40 and last 40 comments. View all 229 comments or add a comment.
This report contains Public information  
Everyone can see this information.

Duplicates of this bug

Other bug subscribers

Bug attachments

Remote bug watches

Bug watches keep track of this bug in other bug trackers.