Dumping 105 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20080926'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = true  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.dpms_on = true  (bool)
  power_management.quirk.dpms_suspend = true  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.quirk.vbemode_restore = true  (bool)
  power_management.quirk.vbestate_restore = true  (bool)
  power_management.quirk.vga_mode_3 = true  (bool)
  power_management.type = 'acpi'  (string)
  system.board.product = 'FJNB1A3'  (string)
  system.board.serial = ''  (string)
  system.board.vendor = 'FUJITSU'  (string)
  system.board.version = ''  (string)
  system.chassis.manufacturer = 'APZ0J10204600010'  (string)
  system.chassis.type = 'Notebook'  (string)
  system.firmware.release_date = '01/10/2007'  (string)
  system.firmware.vendor = 'FUJITSU // Phoenix Technologies Ltd.'  (string)
  system.firmware.version = 'Version 1.15'  (string)
  system.formfactor = 'laptop'  (string)
  system.formfactor.subtype = 'tabletpc'  (string)
  system.hardware.primary_video.product = 9618  (0x2592)  (int)
  system.hardware.primary_video.vendor = 32902  (0x8086)  (int)
  system.hardware.product = 'LifeBook P1510D'  (string)
  system.hardware.serial = 'R6212212'  (string)
  system.hardware.uuid = '7286D151-A34D-11DA-8B14-000B5DD36A9D'  (string)
  system.hardware.vendor = 'FUJITSU'  (string)
  system.hardware.version = ''  (string)
  system.kernel.machine = 'i686'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.28-11-generic'  (string)
  system.kernel.version.major = 2  (0x2)  (int)
  system.kernel.version.micro = 28  (0x1c)  (int)
  system.kernel.version.minor = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/net_be_01_44_0a_28_2f'
  info.capabilities = {'net', 'net.bridge'} (string list)
  info.category = 'net.bridge'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Bridge Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_be_01_44_0a_28_2f'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/pan0'  (string)
  net.address = 'be:01:44:0a:28:2f'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.bridge.mac_address = 208912645761071  (0xbe01440a282f)  (uint64)
  net.interface = 'pan0'  (string)
  net.linux.ifindex = 5  (0x5)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Video Bus'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event5'  (string)
  input.product = 'Video Bus'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/snd/timer'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Fujitsu FUJ02B1'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event6'  (string)
  input.product = 'Fujitsu FUJ02B1'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:07/FUJ02B1:00/input/input6/event6'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  access_control.file = '/dev/sequencer2'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'  (string)
  linux.device_file = '/dev/sequencer2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2'  (string)
  oss.device_file = '/dev/sequencer2'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  access_control.file = '/dev/sequencer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'  (string)
  linux.device_file = '/dev/sequencer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer'  (string)
  oss.device_file = '/dev/sequencer'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
  button.has_state = true  (bool)
  button.state.value = false  (bool)
  button.type = 'lid'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'input.switch', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Lid Switch'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'  (string)
  input.device = '/dev/input/event1'  (string)
  input.product = 'Lid Switch'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  access_control.file = '/dev/snd/seq'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/seq'  (string)
  alsa.type = 'sequencer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
  linux.device_file = '/dev/snd/seq'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/seq'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
  access_control.file = '/dev/input/event3'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Pentium(R) M processor 1.20GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU0'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = false  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.capabilities = {'net', 'net.loopback'} (string list)
  info.category = 'net.loopback'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Loopback device Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
  net.address = '00:00:00:00:00:00'  (string)
  net.arp_proto_hw_id = 772  (0x304)  (int)
  net.interface = 'lo'  (string)
  net.linux.ifindex = 1  (0x1)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_backlight'
  info.addons = {'hald-addon-generic-backlight'} (string list)
  info.capabilities = {'laptop_panel'} (string list)
  info.category = 'laptop_panel'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Generic Backlight Device'  (string)
  info.subsystem = 'backlight'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_backlight'  (string)
  laptop_panel.access_method = 'general'  (string)
  laptop_panel.brightness_in_hardware = false  (bool)
  laptop_panel.num_levels = 8  (0x8)  (int)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'backlight'  (string)
  linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'  (string)
  input.device = '/dev/input/event2'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_CMB1'
  battery.charge_level.current = 27864  (0x6cd8)  (int)
  battery.charge_level.design = 28080  (0x6db0)  (int)
  battery.charge_level.last_full = 28080  (0x6db0)  (int)
  battery.charge_level.percentage = 99  (0x63)  (int)
  battery.charge_level.rate = 3196  (0xc7c)  (int)
  battery.is_rechargeable = true  (bool)
  battery.model = 'CP229720 / CP229721'  (string)
  battery.present = true  (bool)
  battery.rechargeable.is_charging = true  (bool)
  battery.rechargeable.is_discharging = false  (bool)
  battery.remaining_time = 243  (0xf3)  (int)
  battery.reporting.current = 2580  (0xa14)  (int)
  battery.reporting.design = 2600  (0xa28)  (int)
  battery.reporting.last_full = 2600  (0xa28)  (int)
  battery.reporting.rate = 296  (0x128)  (int)
  battery.reporting.technology = 'Li-ion'  (string)
  battery.reporting.unit = 'mAh'  (string)
  battery.serial = '1'  (string)
  battery.technology = 'lithium-ion'  (string)
  battery.type = 'primary'  (string)
  battery.vendor = 'Fujitsu'  (string)
  battery.voltage.current = 12646  (0x3166)  (int)
  battery.voltage.design = 10800  (0x2a30)  (int)
  battery.voltage.unit = 'mV'  (string)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  info.is_recalled = true  (bool)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'CP229720 / CP229721'  (string)
  info.recall.vendor = 'Fujitsu'  (string)
  info.recall.website_url = 'http://www.computers.us.fujitsu.com/battery/'  (string)
  info.subsystem = 'power_supply'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_CMB1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/CMB1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'
  ac_adapter.present = true  (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Generic AC Adapter Device'  (string)
  info.subsystem = 'power_supply'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_AC'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'power_supply'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/AC'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (FF)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Power Button (FF)'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PS/2 Port for PS/2-style Mice'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.description = 'PS/2 Port for PS/2-style Mice'  (string)
  pnp.id = 'PNP0f13'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT-style speaker sound'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.linux.driver = 'rtc_cmos'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_FUJ02bf'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (FUJ02bf)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_FUJ02bf'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.id = 'FUJ02bf'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_FUJ02e6'
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (FUJ02e6)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_FUJ02e6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.id = 'FUJ02e6'  (string)
  pnp.serial.irq = 4  (0x4)  (int)
  pnp.serial.port = '0x220'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_FUJ02e6_serial_platform_0'
  access_control.file = '/dev/ttyS0'  (string)
  access_control.type = 'modem'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'serial', 'access_control'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_FUJ02e6'  (string)
  info.product = 'PnP Device (FUJ02e6)'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_FUJ02e6_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02/tty/ttyS0'  (string)
  serial.device = '/dev/ttyS0'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_FUJ02e6'  (string)
  serial.port = 0  (0x0)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PCI Bus'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.description = 'PCI Bus'  (string)
  pnp.id = 'PNP0a03'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (regulatory.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/regulatory.0'  (string)
  platform.id = 'regulatory.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.linux.driver = 'pcspkr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  info.product = 'PC Speaker'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
  input.device = '/dev/input/event7'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.product = 'PC Speaker'  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input7/event7'  (string)

udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
  info.linux.driver = 'iTCO_wdt'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (iTCO_wdt)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/iTCO_wdt'  (string)
  platform.id = 'iTCO_wdt'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'
  info.linux.driver = 'psmouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX3 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio4'  (string)
  serio.description = 'i8042 AUX3 port'  (string)
  serio.id = 'serio4'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input_0'
  access_control.file = '/dev/input/event9'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'input.touchpad', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  info.product = 'AlpsPS/2 ALPS DualPoint TouchPad'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input_0'  (string)
  input.device = '/dev/input/event9'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  input.product = 'AlpsPS/2 ALPS DualPoint TouchPad'  (string)
  input.x11_driver = 'synaptics'  (string)
  linux.device_file = '/dev/input/event9'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio4/input/input9/event9'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
  access_control.file = '/dev/input/event8'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  info.product = 'DualPoint Stick'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'  (string)
  input.product = 'DualPoint Stick'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio4/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX2 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio3'  (string)
  serio.description = 'i8042 AUX2 port'  (string)
  serio.id = 'serio3'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX1 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio2'  (string)
  serio.description = 'i8042 AUX1 port'  (string)
  serio.id = 'serio2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX0 port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX0 port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.linux.driver = 'atkbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  info.product = 'AT Translated Set 2 keyboard'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'  (string)
  input.device = '/dev/input/event4'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.product = 'AT Translated Set 2 keyboard'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/platform_fujitsu_laptop'
  info.linux.driver = 'fujitsu-laptop'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (fujitsu-laptop)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_fujitsu_laptop'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/fujitsu-laptop'  (string)
  platform.id = 'fujitsu-laptop'  (string)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (eisa.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/eisa.0'  (string)
  platform.id = 'eisa.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (Fixed MDIO bus.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0'  (string)
  platform.id = 'Fixed MDIO bus.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266a'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266a'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller'  (string)
  pci.product_id = 9834  (0x266a)  (int)
  pci.subsys_product_id = 4839  (0x12e7)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f'
  info.linux.driver = 'ata_piix'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'  (string)
  pci.product_id = 9839  (0x266f)  (int)
  pci.subsys_product_id = 4837  (0x12e5)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'TOSHIBA MK3006GA'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'
  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_device_lun0'  (string)
  info.product = 'TOSHIBA MK3006GA'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda'  (string)
  storage.automount_enabled_hint = false  (bool)
  storage.bus = 'pci'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = 'BY10'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'TOSHIBA MK3006GA'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 30005821440  (0x6fc7c8000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  storage.size = 30005821440  (0x6fc7c8000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_0caaad35_386f_4d2b_ade1_ca998965e4ad'
  block.device = '/dev/sda5'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_0caaad35_386f_4d2b_ade1_ca998965e4ad'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda/sda5'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2506077  (0x263d5d)  (uint64)
  volume.partition.media_size = 30005821440  (0x6fc7c8000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.start = 28722710016  (0x6b001c600)  (uint64)
  volume.size = 1283111424  (0x4c7aba00)  (uint64)
  volume.uuid = '0caaad35-386f-4d2b-ade1-ca998965e4ad'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
  block.device = '/dev/sda2'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda/sda2'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2  (0x2)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 30005821440  (0x6fc7c8000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 28722677760  (0x6b0014800)  (uint64)
  volume.partition.type = '0x05'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 1024  (0x400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_b052b062_d973_4b5c_bdb5_8f5ebf79dc7e'
  block.device = '/dev/sda1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_TOSHIBA_MK3006G_16AA3822T'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_b052b062_d973_4b5c_bdb5_8f5ebf79dc7e'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sda/sda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 56098917  (0x3580065)  (uint64)
  volume.partition.media_size = 30005821440  (0x6fc7c8000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.size = 28722645504  (0x6b000ca00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'b052b062-d973-4b5c-bdb5-8f5ebf79dc7e'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2641'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FBM (ICH6M) LPC Interface Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2641'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.product = '82801FBM (ICH6M) LPC Interface Bridge'  (string)
  pci.product_id = 9793  (0x2641)  (int)
  pci.subsys_product_id = 4836  (0x12e4)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266d'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266d'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.3'  (string)
  pci.device_class = 7  (0x7)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.3'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller'  (string)
  pci.product_id = 9837  (0x266d)  (int)
  pci.subsys_product_id = 4897  (0x1321)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e'
  info.linux.driver = 'Intel ICH'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller'  (string)
  pci.product_id = 9838  (0x266e)  (int)
  pci.subsys_product_id = 4850  (0x12f2)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)
  info.product = 'Intel ICH6 with ALC203 Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0'  (string)
  sound.card = 0  (0x0)  (int)
  sound.card_id = 'Intel ICH6 with ALC203'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_4'
  access_control.file = '/dev/snd/pcmC0D4p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'Intel ICH6 with ALC203'  (string)
  alsa.device = 4  (0x4)  (int)
  alsa.device_file = '/dev/snd/pcmC0D4p'  (string)
  alsa.device_id = 'Intel ICH6 - IEC958'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 - IEC958 ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_4'  (string)
  linux.device_file = '/dev/snd/pcmC0D4p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D4p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_3'
  access_control.file = '/dev/snd/pcmC0D3c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'Intel ICH6 with ALC203'  (string)
  alsa.device = 3  (0x3)  (int)
  alsa.device_file = '/dev/snd/pcmC0D3c'  (string)
  alsa.device_id = 'Intel ICH6 - ADC2'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 - ADC2 ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_3'  (string)
  linux.device_file = '/dev/snd/pcmC0D3c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D3c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_2'
  access_control.file = '/dev/snd/pcmC0D2c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'Intel ICH6 with ALC203'  (string)
  alsa.device = 2  (0x2)  (int)
  alsa.device_file = '/dev/snd/pcmC0D2c'  (string)
  alsa.device_id = 'Intel ICH6 - MIC2 ADC'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 - MIC2 ADC ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_2'  (string)
  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D2c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_1'
  access_control.file = '/dev/snd/pcmC0D1c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'Intel ICH6 with ALC203'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.device_file = '/dev/snd/pcmC0D1c'  (string)
  alsa.device_id = 'Intel ICH6 - MIC ADC'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 - MIC ADC ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D1c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_0'
  access_control.file = '/dev/snd/pcmC0D0p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'Intel ICH6 with ALC203'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  alsa.device_id = 'Intel ICH6'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_0'
  access_control.file = '/dev/snd/pcmC0D0c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'Intel ICH6 with ALC203'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  alsa.device_id = 'Intel ICH6'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/mixer'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'Intel ICH6 with ALC203'  (string)
  oss.device_file = '/dev/mixer'  (string)
  oss.device_id = 'Intel ICH6'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0_0'
  access_control.file = '/dev/dsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/dsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'Intel ICH6 with ALC203'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp'  (string)
  oss.device_id = 'Intel ICH6'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC0'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'Intel ICH6 with ALC203'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 with ALC203 ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0'
  access_control.file = '/dev/audio'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/audio'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'Intel ICH6 with ALC203'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio'  (string)
  oss.device_id = 'Intel ICH6'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_1'
  access_control.file = '/dev/adsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  info.product = 'Intel ICH6 OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0_oss_pcm_1'  (string)
  linux.device_file = '/dev/adsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.2/sound/card0/adsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'Intel ICH6 with ALC203'  (string)
  oss.device = 1  (0x1)  (int)
  oss.device_file = '/dev/adsp'  (string)
  oss.device_id = 'Intel ICH6'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_266e_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801 Mobile PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.product = '82801 Mobile PCI Bridge'  (string)
  pci.product_id = 9288  (0x2448)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_168c_1b'
  info.linux.driver = 'ath5k_pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'AR5413 802.11abg NIC'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_168c_1b'  (string)
  info.vendor = 'Atheros Communications Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:05.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:05.0'  (string)
  pci.product = 'AR5413 802.11abg NIC'  (string)
  pci.product_id = 27  (0x1b)  (int)
  pci.subsys_product_id = 4905  (0x1329)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Atheros Communications Inc.'  (string)
  pci.vendor_id = 5772  (0x168c)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_11_f5_ec_74_29_0'
  info.capabilities = {'net', 'net.80211control'} (string list)
  info.category = 'net.80211control'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_168c_1b'  (string)
  info.product = 'Networking Wireless Control Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_11_f5_ec_74_29_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:05.0/net/wmaster0'  (string)
  net.address = '00:11:f5:ec:74:29'  (string)
  net.arp_proto_hw_id = 801  (0x321)  (int)
  net.interface = 'wmaster0'  (string)
  net.linux.ifindex = 3  (0x3)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_168c_1b'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_11_f5_ec_74_29'
  info.capabilities = {'net', 'net.80211'} (string list)
  info.category = 'net.80211'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_168c_1b'  (string)
  info.product = 'WLAN Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_11_f5_ec_74_29'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:05.0/net/wlan0'  (string)
  net.80211.mac_address = 77140358185  (0x11f5ec7429)  (uint64)
  net.address = '00:11:f5:ec:74:29'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'wlan0'  (string)
  net.linux.ifindex = 4  (0x4)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_168c_1b'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'
  info.linux.driver = '8139too'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'RTL-8139/8139C/8139C+'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'  (string)
  info.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:04.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:04.0'  (string)
  pci.product = 'RTL-8139/8139C/8139C+'  (string)
  pci.product_id = 33081  (0x8139)  (int)
  pci.subsys_product_id = 4814  (0x12ce)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Realtek Semiconductor Co., Ltd.'  (string)
  pci.vendor_id = 4332  (0x10ec)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_0b_5d_d3_6a_9d'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_0b_5d_d3_6a_9d'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:04.0/net/eth0'  (string)
  net.80203.mac_address = 48818776733  (0xb5dd36a9d)  (uint64)
  net.address = '00:0b:5d:d3:6a:9d'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8139'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_1180_822'
  info.linux.driver = 'sdhci-pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.1'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.1'  (string)
  pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'  (string)
  pci.product_id = 2082  (0x822)  (int)
  pci.subsys_product_id = 4899  (0x1323)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'
  info.capabilities = {'mmc_host'} (string list)
  info.category = 'mmc_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.product = 'MMC/SD Host Adapter'  (string)
  info.subsystem = 'mmc_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'mmc_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.1/mmc_host/mmc0'  (string)
  mmc_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_card_rca43425'
  info.linux.driver = 'mmcblk'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1180_822'  (string)
  info.product = 'SU02G'  (string)
  info.subsystem = 'mmc'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_card_rca43425'  (string)
  info.vendor = 'Unknown (3)'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'mmc'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.1/mmc_host/mmc0/mmc0:a9a1'  (string)
  mmc.cid = '03534453553032478020308fd4007900'  (string)
  mmc.csd = '002600325f5a83c93efbcfff92804000'  (string)
  mmc.date = '09/2007'  (string)
  mmc.fwrev = 0  (0x0)  (int)
  mmc.hwrev = 8  (0x8)  (int)
  mmc.oem = 'Unknown (21316)'  (string)
  mmc.rca = 43425  (0xa9a1)  (int)
  mmc.scr = '0225000000000000'  (string)
  mmc.serial = 540053460  (0x20308fd4)  (int)
  mmc.type = 'SD'  (string)
  mmc.vendor = 'Unknown (3)'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_0x20308fd4'
  block.device = '/dev/mmcblk0'  (string)
  block.is_volume = false  (bool)
  block.major = 179  (0xb3)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_0x20308fd4'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_card_rca43425'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_0x20308fd4'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.1/mmc_host/mmc0/mmc0:a9a1/block/mmcblk0'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'mmc'  (string)
  storage.drive_type = 'sd_mmc'  (string)
  storage.hotpluggable = true  (bool)
  storage.media_check_enabled = false  (bool)
  storage.model = ''  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_card_rca43425'  (string)
  storage.partitioning_scheme = 'none'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 2032664576  (0x79280000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = '0x20308fd4'  (string)
  storage.size = 2032664576  (0x79280000)  (uint64)
  storage.vendor = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_3464_6638'
  block.device = '/dev/mmcblk0p1'  (string)
  block.is_volume = true  (bool)
  block.major = 179  (0xb3)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_0x20308fd4'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_0x20308fd4'  (string)
  info.product = 'Volume (vfat)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_3464_6638'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.1/mmc_host/mmc0/mmc0:a9a1/block/mmcblk0/mmcblk0p1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'vfat'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = 'FAT16'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list)
  volume.mount_point = '/media/disk'  (string)
  volume.num_blocks = 3967239  (0x3c8907)  (uint64)
  volume.partition.media_size = 2032664576  (0x79280000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 127488  (0x1f200)  (uint64)
  volume.size = 2031226368  (0x79120e00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '3464-6638'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1180_476'
  info.linux.driver = 'yenta_cardbus'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
  info.product = 'RL5c476 II'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1180_476'  (string)
  info.vendor = 'Ricoh Co Ltd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 7  (0x7)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:06:03.0'  (string)
  pci.product = 'RL5c476 II'  (string)
  pci.product_id = 1142  (0x476)  (int)
  pci.subsys_product_id = 4692  (0x1254)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Ricoh Co Ltd'  (string)
  pci.vendor_id = 4480  (0x1180)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_265c'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265c'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'  (string)
  pci.product_id = 9820  (0x265c)  (int)
  pci.subsys_product_id = 4841  (0x12e9)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265c'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 8  (0x8)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:1d.7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 8  (0x8)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:1d.7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_265b'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265b'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'  (string)
  pci.product_id = 9819  (0x265b)  (int)
  pci.subsys_product_id = 4840  (0x12e8)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265b'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/005/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'  (string)
  usb_device.bus_number = 5  (0x5)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.3'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'  (string)
  usb.bus_number = 5  (0x5)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.3'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_265a'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265a'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'  (string)
  pci.product_id = 9818  (0x265a)  (int)
  pci.subsys_product_id = 4840  (0x12e8)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265a'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'  (string)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.2'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'  (string)
  usb.bus_number = 4  (0x4)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.2'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2659'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2659'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'  (string)
  pci.product_id = 9817  (0x2659)  (int)
  pci.subsys_product_id = 4840  (0x12e8)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2659'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.product = 'AES2501 Fingerprint Sensor'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial'  (string)
  info.vendor = 'AuthenTec, Inc.'  (string)
  linux.device_file = '/dev/bus/usb/003/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 255  (0xff)  (int)
  usb_device.device_protocol = 255  (0xff)  (int)
  usb_device.device_revision_bcd = 1569  (0x621)  (int)
  usb_device.device_subclass = 255  (0xff)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'AES2501 Fingerprint Sensor'  (string)
  usb_device.product_id = 9600  (0x2580)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'AuthenTec, Inc.'  (string)
  usb_device.vendor_id = 2303  (0x8ff)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial_if0'
  access_control.file = '/dev/bus/usb/003/002'  (string)
  access_control.type = 'scanner'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'scanner', 'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial'  (string)
  info.product = 'USB Vendor Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0'  (string)
  scanner.access_method = 'proprietary'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 255  (0xff)  (int)
  usb.device_protocol = 255  (0xff)  (int)
  usb.device_revision_bcd = 1569  (0x621)  (int)
  usb.device_subclass = 255  (0xff)  (int)
  usb.interface.class = 255  (0xff)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 255  (0xff)  (int)
  usb.interface.subclass = 255  (0xff)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Vendor Specific Interface'  (string)
  usb.product_id = 9600  (0x2580)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'AuthenTec, Inc.'  (string)
  usb.vendor_id = 2303  (0x8ff)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2658'
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2658'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'  (string)
  pci.product_id = 9816  (0x2658)  (int)
  pci.subsys_product_id = 4840  (0x12e8)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2658'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:1d.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:1d.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2792'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2792'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  pci.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  pci.product_id = 10130  (0x2792)  (int)
  pci.subsys_product_id = 4827  (0x12db)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2592'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2592'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.product = 'Mobile 915GM/GMS/910GML Express Graphics Controller'  (string)
  pci.product_id = 9618  (0x2592)  (int)
  pci.subsys_product_id = 4827  (0x12db)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2592_drm_i915_card0'
  access_control.file = '/dev/dri/card0'  (string)
  access_control.type = 'video'  (string)
  drm.dri_library = 'i915'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'drm', 'access_control'} (string list)
  info.category = 'drm'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2592'  (string)
  info.product = 'Direct Rendering Manager Device'  (string)
  info.subsystem = 'drm'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2592_drm_i915_card0'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.device_file = '/dev/dri/card0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'drm'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2590'
  info.linux.driver = 'agpgart-intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2590'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller'  (string)
  pci.product_id = 9616  (0x2590)  (int)
  pci.subsys_product_id = 4823  (0x12d7)  (int)
  pci.subsys_vendor = 'Fujitsu Limited.'  (string)
  pci.subsys_vendor_id = 4303  (0x10cf)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'  (string)
  access_control.type = 'camera'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2590'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fuse'  (string)


Dumped 105 device(s) from the Global Device List.
------------------------------------------------