Dumping 147 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20080926' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = false (bool) power_management.quirk.dpms_on = true (bool) power_management.quirk.dpms_suspend = true (bool) power_management.quirk.vbe_post = true (bool) power_management.quirk.vbemode_restore = true (bool) power_management.quirk.vbestate_restore = true (bool) power_management.quirk.vga_mode_3 = true (bool) power_management.type = 'acpi' (string) system.board.product = '3045' (string) system.board.serial = 'None' (string) system.board.vendor = 'Quanta' (string) system.board.version = '16.09' (string) system.chassis.manufacturer = 'Quanta' (string) system.chassis.type = 'Notebook' (string) system.firmware.release_date = '02/17/2009' (string) system.firmware.vendor = 'Hewlett-Packard' (string) system.firmware.version = 'F.12' (string) system.formfactor = 'laptop' (string) system.hardware.primary_video.product = 38418 (0x9612) (int) system.hardware.primary_video.vendor = 4098 (0x1002) (int) system.hardware.product = 'HP TouchSmart tx2 Notebook PC' (string) system.hardware.serial = 'CNF91114L0' (string) system.hardware.uuid = '434E4639-3131-3134-4C30-00238B8E832A' (string) system.hardware.vendor = 'Hewlett-Packard' (string) system.hardware.version = 'Rev 1' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.28-14-generic' (string) system.kernel.version.major = 2 (0x2) (int) system.kernel.version.micro = 28 (0x1c) (int) system.kernel.version.minor = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event6' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'fr' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = 'oss' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' access_control.file = '/dev/input/event4' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event4' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' button.has_state = true (bool) button.state.value = false (bool) button.type = 'lid' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.switch', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Lid Switch' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string) input.device = '/dev/input/event3' (string) input.product = 'Lid Switch' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Turion(tm) X2 Dual-Core Mobile RM-75' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = true (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Turion(tm) X2 Dual-Core Mobile RM-75' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/net_7a_76_e2_66_83_67' info.capabilities = {'net', 'net.bridge'} (string list) info.category = 'net.bridge' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Bridge Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_7a_76_e2_66_83_67' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/pan0' (string) net.address = '7a:76:e2:66:83:67' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.bridge.mac_address = 134651023098727 (0x7a76e2668367) (uint64) net.interface = 'pan0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/net_computer_loopback' info.capabilities = {'net', 'net.loopback'} (string list) info.category = 'net.loopback' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Loopback device Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/lo' (string) net.address = '00:00:00:00:00:00' (string) net.arp_proto_hw_id = 772 (0x304) (int) net.interface = 'lo' (string) net.linux.ifindex = 1 (0x1) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_backlight' info.addons = {'hald-addon-generic-backlight'} (string list) info.capabilities = {'laptop_panel'} (string list) info.category = 'laptop_panel' (string) info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic Backlight Device' (string) info.subsystem = 'backlight' (string) info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string) laptop_panel.access_method = 'general' (string) laptop_panel.brightness_in_hardware = false (bool) laptop_panel.num_levels = 11 (0xb) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'backlight' (string) linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sleep Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event2' (string) input.product = 'Sleep Button (CM)' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event1' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' battery.charge_level.current = 76032 (0x12900) (int) battery.charge_level.design = 73440 (0x11ee0) (int) battery.charge_level.last_full = 76032 (0x12900) (int) battery.charge_level.percentage = 100 (0x64) (int) battery.charge_level.rate = 0 (0x0) (int) battery.is_rechargeable = true (bool) battery.model = 'Primary' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = false (bool) battery.reporting.current = 10560 (0x2940) (int) battery.reporting.design = 10200 (0x27d8) (int) battery.reporting.last_full = 10560 (0x2940) (int) battery.reporting.rate = -1 (0xffffffff) (int) battery.reporting.technology = 'Li-ion' (string) battery.reporting.unit = 'mAh' (string) battery.serial = '' (string) battery.technology = 'lithium-ion' (string) battery.type = 'primary' (string) battery.vendor = 'Hewlett-Packard' (string) battery.voltage.current = 8308 (0x2074) (int) battery.voltage.design = 7200 (0x1c20) (int) battery.voltage.unit = 'mV' (string) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Primary' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' ac_adapter.present = true (bool) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic AC Adapter Device' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/ACAD' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (FF)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event0' (string) input.product = 'Power Button (FF)' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/pnp_ENE0100' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (ENE0100)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_ENE0100' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) pnp.id = 'ENE0100' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_SYN014c' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (SYN014c)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_SYN014c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.id = 'SYN014c' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0103)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.id = 'PNP0103' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0a08)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.id = 'PNP0a08' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event8' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input8/event8' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.linux.driver = 'psmouse' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' info.capabilities = {'input', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event11' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'SynPS/2 Synaptics TouchPad' (string) input.x11_driver = 'synaptics' (string) linux.device_file = '/dev/input/event11' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input11/event11' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.keymap.data = {'e001:fn_esc', 'e009:battery', 'e00a:screenlock', 'e00b:camera', 'e00c:media', 'e00e:dvd', 'e031:help', 'e033:f21', 'e057:wlan', 'e012:brightnessdown', 'e017:brightnessup', 'e06e:switchvideomode'} (string list) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'fr' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = 'oss' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (Fixed MDIO bus.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0' (string) platform.id = 'Fixed MDIO bus.0' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_1304' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 11h Link Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1304' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.4' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.4' (string) pci.product = 'Family 11h Link Control' (string) pci.product_id = 4868 (0x1304) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1303' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 11h Miscellaneous Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1303' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.product = 'Family 11h Miscellaneous Control' (string) pci.product_id = 4867 (0x1303) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1302' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 11h DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1302' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.product = 'Family 11h DRAM Controller' (string) pci.product_id = 4866 (0x1302) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1301' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 11h Address Map' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1301' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.product = 'Family 11h Address Map' (string) pci.product_id = 4865 (0x1301) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1300' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 11h HyperTransport Configuration' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1300' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.product = 'Family 11h HyperTransport Configuration' (string) pci.product_id = 4864 (0x1300) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4399' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB OHCI2 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4399' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5' (string) pci.product = 'SB700/SB800 USB OHCI2 Controller' (string) pci.product_id = 17305 (0x4399) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_14_5' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4399' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_14_5' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/007/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7' (string) usb_device.bus_number = 7 (0x7) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:14.5' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_14_5' (string) info.product = 'Duosense Transparent Electromagnetic Digitizer' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial' (string) info.vendor = 'N-Trig' (string) linux.device_file = '/dev/bus/usb/007/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2' (string) usb_device.bus_number = 7 (0x7) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 3 (0x3) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Duosense Transparent Electromagnetic Digitizer' (string) usb_device.product_id = 1 (0x1) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'N-Trig' (string) usb_device.vendor_id = 7062 (0x1b96) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if2' info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial' (string) info.product = 'USB Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.2' (string) usb.bus_number = 7 (0x7) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 0 (0x0) (int) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.2' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 3 (0x3) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Interface' (string) usb.product_id = 1 (0x1) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'N-Trig' (string) usb.vendor_id = 7062 (0x1b96) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1' (string) usb.bus_number = 7 (0x7) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 3 (0x3) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 1 (0x1) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'N-Trig' (string) usb.vendor_id = 7062 (0x1b96) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_hiddev' hiddev.application_pages = {'Unknown page 0xd0002', 'Unknown page 0xd0004'} (string list) hiddev.device = '/dev/usb/hiddev1' (string) hiddev.product = 'HID 1b96:0001' (string) info.capabilities = {'hiddev'} (string list) info.category = 'hiddev' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1' (string) info.product = 'HID 1b96:0001' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_hiddev' (string) linux.device_file = '/dev/usb/hiddev1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/usb/hiddev1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input' info.capabilities = {'input', 'input.tablet'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1' (string) info.product = 'HID 1b96:0001' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event9' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1' (string) input.product = 'HID 1b96:0001' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input9/event9' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0' (string) usb.bus_number = 7 (0x7) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 3 (0x3) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 1 (0x1) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'N-Trig' (string) usb.vendor_id = 7062 (0x1b96) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_hiddev' hiddev.application_pages = {'Unknown page 0xd0002', 'Unknown page 0xd0004'} (string list) hiddev.device = '/dev/usb/hiddev0' (string) hiddev.product = 'HID 1b96:0001' (string) info.capabilities = {'hiddev'} (string list) info.category = 'hiddev' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0' (string) info.product = 'HID 1b96:0001' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_hiddev' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'stylus' (string) linux.device_file = '/dev/usb/hiddev0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/usb/hiddev0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input' info.capabilities = {'input', 'input.tablet'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0' (string) info.product = 'HID 1b96:0001' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event7' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0' (string) input.product = 'HID 1b96:0001' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'stylus' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input7/event7' (string) udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_14_5' (string) info.product = 'AES1600' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' (string) info.vendor = 'AuthenTec, Inc.' (string) linux.device_file = '/dev/bus/usb/007/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-1' (string) usb_device.bus_number = 7 (0x7) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 255 (0xff) (int) usb_device.device_protocol = 255 (0xff) (int) usb_device.device_revision_bcd = 3088 (0xc10) (int) usb_device.device_subclass = 255 (0xff) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'AES1600' (string) usb_device.product_id = 5632 (0x1600) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'AuthenTec, Inc.' (string) usb_device.vendor_id = 2303 (0x8ff) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-1/7-1:1.0' (string) usb.bus_number = 7 (0x7) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 255 (0xff) (int) usb.device_protocol = 255 (0xff) (int) usb.device_revision_bcd = 3088 (0xc10) (int) usb.device_subclass = 255 (0xff) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-1/7-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 5632 (0x1600) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'AuthenTec, Inc.' (string) usb.vendor_id = 2303 (0x8ff) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_14_5_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_14_5' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_14_5_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-0:1.0' (string) usb.bus_number = 7 (0x7) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:14.5' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_1002_4384' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 PCI to PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4384' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4' (string) pci.product = 'SBx00 PCI to PCI Bridge' (string) pci.product_id = 17284 (0x4384) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_439d' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 LPC host controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_439d' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.3' (string) pci.product = 'SB700/SB800 LPC host controller' (string) pci.product_id = 17309 (0x439d) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4383' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 Azalia (Intel HDA)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2' (string) pci.product = 'SBx00 Azalia (Intel HDA)' (string) pci.product_id = 17283 (0x4383) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) info.product = 'HDA ATI SB Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA ATI SB' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA ATI SB' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'ALC268 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA ATI SB' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'ALC268 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_6' access_control.file = '/dev/snd/pcmC0D6c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 6 (0x6) (int) alsa.device_file = '/dev/snd/pcmC0D6c' (string) alsa.device_id = 'Si3054 Modem' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'Si3054 Modem ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_6' (string) linux.device_file = '/dev/snd/pcmC0D6c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D6c' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'ALC268 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_2' access_control.file = '/dev/snd/pcmC0D2c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 2 (0x2) (int) alsa.device_file = '/dev/snd/pcmC0D2c' (string) alsa.device_id = 'ALC268 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_2' (string) linux.device_file = '/dev/snd/pcmC0D2c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D2c' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Analog OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA ATI SB' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'ALC268 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'ALC268 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Analog ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'HDA ATI SB ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_6' access_control.file = '/dev/snd/pcmC0D6p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 6 (0x6) (int) alsa.device_file = '/dev/snd/pcmC0D6p' (string) alsa.device_id = 'Si3054 Modem' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'Si3054 Modem ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_6' (string) linux.device_file = '/dev/snd/pcmC0D6p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D6p' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_1' access_control.file = '/dev/snd/pcmC0D1p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA ATI SB' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1p' (string) alsa.device_id = 'ALC268 Digital' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Digital ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_1' (string) linux.device_file = '/dev/snd/pcmC0D1p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D1p' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1' access_control.file = '/dev/adsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) info.product = 'ALC268 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.2/sound/card0/adsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA ATI SB' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/adsp' (string) oss.device_id = 'ALC268 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_439c' info.linux.driver = 'pata_atiixp' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 IDE Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_439c' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 128 (0x80) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1' (string) pci.product = 'SB700/SB800 IDE Controller' (string) pci.product_id = 17308 (0x439c) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_439c_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_439c' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_439c_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host7/scsi_host/host7' (string) scsi_host.host = 7 (0x7) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_439c_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_439c' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_439c_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.1/host6/scsi_host/host6' (string) scsi_host.host = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4385' info.linux.driver = 'piix4_smbus' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SBx00 SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4385' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string) pci.product = 'SBx00 SMBus Controller' (string) pci.product_id = 17285 (0x4385) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4396_0' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4396_0' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2' (string) pci.product = 'SB700/SB800 USB EHCI Controller' (string) pci.product_id = 17302 (0x4396) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_2' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4396_0' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 6 (0x6) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:13.2' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_2' (string) info.product = 'HP Webcam' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00' (string) info.vendor = 'Suyin Corp.' (string) linux.device_file = '/dev/bus/usb/002/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 239 (0xef) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 800 (0x320) (int) usb_device.device_subclass = 2 (0x2) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2' (string) usb_device.max_power = 98 (0x62) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'HP Webcam' (string) usb_device.product_id = 41220 (0xa104) (int) usb_device.serial = 'CN0314-S30C-MI07-VH-R03.02.00' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Suyin Corp.' (string) usb_device.vendor_id = 1614 (0x64e) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if1' info.linux.driver = 'uvcvideo' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00' (string) info.product = 'USB Video Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.1' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 800 (0x320) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 14 (0xe) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 2 (0x2) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.1' (string) usb.max_power = 98 (0x62) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Video Interface' (string) usb.product_id = 41220 (0xa104) (int) usb.serial = 'CN0314-S30C-MI07-VH-R03.02.00' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Suyin Corp.' (string) usb.vendor_id = 1614 (0x64e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0' info.linux.driver = 'uvcvideo' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00' (string) info.product = 'USB Video Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 800 (0x320) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 14 (0xe) (int) usb.interface.description = 'HP Webcam' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0' (string) usb.max_power = 98 (0x62) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Video Interface' (string) usb.product_id = 41220 (0xa104) (int) usb.serial = 'CN0314-S30C-MI07-VH-R03.02.00' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Suyin Corp.' (string) usb.vendor_id = 1614 (0x64e) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0_video4linux' access_control.file = '/dev/video0' (string) access_control.type = 'video4linux' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list) info.category = 'video4linux' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0' (string) info.product = 'HP Webcam' (string) info.subsystem = 'video4linux' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0_video4linux' (string) linux.device_file = '/dev/video0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'video4linux' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/video4linux/video0' (string) video4linux.device = '/dev/video0' (string) video4linux.version = '2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0_logicaldev_input' button.has_state = false (bool) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0' (string) info.product = 'HP Webcam' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0_logicaldev_input' (string) input.device = '/dev/input/event10' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_64e_a104_CN0314_S30C_MI07_VH_R03_02_00_if0' (string) input.product = 'HP Webcam' (string) linux.device_file = '/dev/input/event10' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input10/event10' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_2_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.2/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 6 (0x6) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:13.2' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_1002_4398_0' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700 USB OHCI1 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4398_0' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1' (string) pci.product = 'SB700 USB OHCI1 Controller' (string) pci.product_id = 17304 (0x4398) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4398_0' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/006/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6' (string) usb_device.bus_number = 6 (0x6) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:13.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1' (string) info.product = 'Wireless (Bluetooth + WLAN) Interface [Integrated Module]' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.vendor = 'Hewlett-Packard' (string) linux.device_file = '/dev/bus/usb/006/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1' (string) usb_device.bus_number = 6 (0x6) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 224 (0xe0) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 1 (0x1) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 4 (0x4) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Wireless (Bluetooth + WLAN) Interface [Integrated Module]' (string) usb_device.product_id = 5917 (0x171d) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Hewlett-Packard' (string) usb_device.vendor_id = 1008 (0x3f0) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if3' info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Application Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.3' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 254 (0xfe) (int) usb.interface.number = 3 (0x3) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.3' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Application Specific Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if2' info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.2' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if1' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0_bluetooth_hci_247e408d0c' bluetooth_hci.address = 156736982284 (0x247e408d0c) (uint64) bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' (string) info.capabilities = {'bluetooth_hci'} (string list) info.category = 'bluetooth_hci' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' (string) info.product = 'Bluetooth Host Controller Interface' (string) info.subsystem = 'bluetooth' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0_bluetooth_hci_247e408d0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'bluetooth' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/bluetooth/hci0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-0:1.0' (string) usb.bus_number = 6 (0x6) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:13.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_1002_4397_0' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB OHCI0 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4397_0' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0' (string) pci.product = 'SB700/SB800 USB OHCI0 Controller' (string) pci.product_id = 17303 (0x4397) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4397_0' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:13.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.0/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:13.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_1002_4396' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4396' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2' (string) pci.product = 'SB700/SB800 USB EHCI Controller' (string) pci.product_id = 17302 (0x4396) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_12_2' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4396' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_12_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 6 (0x6) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:12.2' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_12_2' (string) info.product = 'Mass Stroage Device' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000' (string) info.vendor = 'Realtek Semiconductor Corp.' (string) linux.device_file = '/dev/bus/usb/001/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration = 'CARD READER' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 22663 (0x5887) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Mass Stroage Device' (string) usb_device.product_id = 344 (0x158) (int) usb_device.serial = '20071114173400000' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Realtek Semiconductor Corp.' (string) usb_device.vendor_id = 3034 (0xbda) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0' info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000' (string) info.product = 'USB Mass Storage Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration = 'CARD READER' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 22663 (0x5887) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.description = 'Bulk-In, Bulk-Out, Interface' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 344 (0x158) (int) usb.serial = '20071114173400000' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Realtek Semiconductor Corp.' (string) usb.vendor_id = 3034 (0xbda) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host8' (string) scsi_host.host = 8 (0x8) (int) udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host8/scsi_host/host8' (string) scsi_host.host = 8 (0x8) (int) udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host8/target8:0:0/8:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 8 (0x8) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'Multi-Card' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__Multi_Card_20071114173400000_0_0' access_control.file = '/dev/sdb' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sdb' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 16 (0x10) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__Multi_Card_20071114173400000_0_0' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_device_lun0' (string) info.product = 'Multi-Card' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__Multi_Card_20071114173400000_0_0' (string) info.vendor = 'Generic-' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host8/target8:0:0/8:0:0:0/block/sdb' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '1.00' (string) storage.hotpluggable = true (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'Multi-Card' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'Generic-_Multi-Card_20071114173400000-0:0' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_158_20071114173400000_if0_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg2' (string) scsi_generic.device = '/dev/sg2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_12_2_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_12_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_12_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.2/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 6 (0x6) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:12.2' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_1002_4398' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700 USB OHCI1 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4398' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.1' (string) pci.product = 'SB700 USB OHCI1 Controller' (string) pci.product_id = 17304 (0x4398) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4398' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.1/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.1/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:12.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.1/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.1/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:12.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_1002_4397' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 USB OHCI0 Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4397' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0' (string) pci.product = 'SB700/SB800 USB OHCI0 Controller' (string) pci.product_id = 17303 (0x4397) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4397' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 3 (0x3) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:12.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_12_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 3 (0x3) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:12.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_1002_4391' info.linux.driver = 'ahci' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'SB700/SB800 SATA Controller [AHCI mode]' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 6 (0x6) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0' (string) pci.product = 'SB700/SB800 SATA Controller [AHCI mode]' (string) pci.product_id = 17297 (0x4391) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_4' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host5/scsi_host/host5' (string) scsi_host.host = 5 (0x5) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_3' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host4/scsi_host/host4' (string) scsi_host.host = 4 (0x4) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_2' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host3/scsi_host/host3' (string) scsi_host.host = 3 (0x3) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_1' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host2/scsi_host/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host1/scsi_host/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host1/target1:0:0/1:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 1 (0x1) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'CDDVDW TS-L633L' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_L633L' access_control.file = '/dev/sr0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/sr0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_L633L' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_device_lun0' (string) info.product = 'CDDVDW TS-L633L' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_L633L' (string) info.vendor = 'TSSTcorp' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host1/target1:0:0/1:0:0:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = true (bool) storage.cdrom.dvdrdl = true (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 0 (0x0) (int) storage.cdrom.write_speeds = {} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = '0500' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'CDDVDW TS-L633L' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_device_lun0_scsi_generic' access_control.file = '/dev/sg1' (string) access_control.type = 'cdrom' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'scsi_generic', 'access_control'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'ST9320320AS' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_device_lun0' (string) info.product = 'ST9320320AS' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'pci' (string) storage.drive_type = 'disk' (string) storage.firmware_version = 'HP07' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'ST9320320AS' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 320072933376 (0x4a85d56000) (uint64) storage.requires_eject = false (bool) storage.serial = 'SATA_ST9320320AS_5SX42TMT' (string) storage.size = 320072933376 (0x4a85d56000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_c8fe4739_dc18_46e0_ae90_f2a6cd70a36f' block.device = '/dev/sda8' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 8 (0x8) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.product = 'Volume (ext4)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_c8fe4739_dc18_46e0_ae90_f2a6cd70a36f' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda/sda8' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext4' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list) volume.mount_point = '/' (string) volume.num_blocks = 20964762 (0x13fe59a) (uint64) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.partition.number = 8 (0x8) (int) volume.partition.start = 64428650496 (0xf003f3000) (uint64) volume.size = 10733958144 (0x27fcb3400) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'c8fe4739-dc18-46e0-ae90-f2a6cd70a36f' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_6B882B423B1C7B3B' block.device = '/dev/sda7' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 7 (0x7) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.product = 'Volume (ntfs)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6B882B423B1C7B3B' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda/sda7' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs-3g' (string) volume.fstype.alternative = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list) volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list) volume.mount_point = '/media/Data' (string) volume.num_blocks = 390797127 (0x174b1747) (uint64) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.partition.number = 7 (0x7) (int) volume.partition.start = 108450349056 (0x1940250000) (uint64) volume.policy.mount_filesystem = 'ntfs-3g' (string) volume.size = 200088129024 (0x2e962e8e00) (uint64) volume.unmount.ntfs.valid_options = {'lazy'} (string list) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '6B882B423B1C7B3B' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_30f139fc_1bf2_433e_a2a3_c21ababbed47' block.device = '/dev/sda6' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 6 (0x6) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_30f139fc_1bf2_433e_a2a3_c21ababbed47' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda/sda6' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2104452 (0x201c84) (uint64) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.partition.number = 6 (0x6) (int) volume.partition.start = 107372837376 (0x18ffeb7a00) (uint64) volume.size = 1077479424 (0x40390800) (uint64) volume.uuid = '30f139fc-1bf2-433e-a2a3-c21ababbed47' (string) udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024' block.device = '/dev/sda3' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 3 (0x3) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda/sda3' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.partition.number = 3 (0x3) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 64428649472 (0xf003f2c00) (uint64) volume.partition.type = '0x05' (string) volume.partition.uuid = '' (string) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_5b244ebe_55d8_4935_850b_c3442669da01' block.device = '/dev/sda5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.product = 'Volume (ext4)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_5b244ebe_55d8_4935_850b_c3442669da01' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda/sda5' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext4' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list) volume.mount_point = '/home' (string) volume.num_blocks = 62910477 (0x3bff00d) (uint64) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 75162640896 (0x11800ae200) (uint64) volume.size = 32210164224 (0x77fe01a00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '5b244ebe-55d8-4935-850b-c3442669da01' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_80C0D14FC0D14C52' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.product = 'RECOVERY' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_80C0D14FC0D14C52' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs-3g' (string) volume.fstype.alternative = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = true (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = 'RECOVERY' (string) volume.linux.is_device_mapper = false (bool) volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list) volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list) volume.mount_point = '' (string) volume.num_blocks = 22507520 (0x1577000) (uint64) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.start = 308545585152 (0x47d6c00000) (uint64) volume.policy.mount_filesystem = 'ntfs-3g' (string) volume.size = 11523850240 (0x2aee00000) (uint64) volume.unmount.ntfs.valid_options = {'lazy'} (string list) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '80C0D14FC0D14C52' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_7966B94D71BEC574' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9320320AS_5SX42TMT' (string) info.product = 'Volume (ntfs)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7966B94D71BEC574' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs-3g' (string) volume.fstype.alternative = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list) volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list) volume.mount_point = '/media/Vista' (string) volume.num_blocks = 125829121 (0x7800001) (uint64) volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 1048576 (0x100000) (uint64) volume.policy.mount_filesystem = 'ntfs-3g' (string) volume.size = 64424509952 (0xf00000200) (uint64) volume.unmount.ntfs.valid_options = {'lazy'} (string list) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '7966B94D71BEC574' (string) udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_4391_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_9606' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (PCIE port 2)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9606' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.product = 'RS780 PCI to PCI bridge (PCIE port 2)' (string) pci.product_id = 38406 (0x9606) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_10ec_8168' info.linux.driver = 'r8169' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1022_9606' (string) info.product = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8168' (string) info.vendor = 'Realtek Semiconductor Co., Ltd.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:09:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:09:00.0' (string) pci.product = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' (string) pci.product_id = 33128 (0x8168) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.vendor_id = 4332 (0x10ec) (int) udi = '/org/freedesktop/Hal/devices/net_00_23_8b_8e_83_2a' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8168' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_23_8b_8e_83_2a' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:09:00.0/net/eth0' (string) net.80203.mac_address = 152665228074 (0x238b8e832a) (uint64) net.address = '00:23:8b:8e:83:2a' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8168' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_1022_9605' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (PCIE port 1)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9605' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.product = 'RS780 PCI to PCI bridge (PCIE port 1)' (string) pci.product_id = 38405 (0x9605) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_14e4_432b' info.linux.driver = 'wl' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1022_9605' (string) info.product = 'BCM4322 802.11a/b/g/n Wireless LAN Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14e4_432b' (string) info.vendor = 'Broadcom Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/0000:08:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/0000:08:00.0' (string) pci.product = 'BCM4322 802.11a/b/g/n Wireless LAN Controller' (string) pci.product_id = 17195 (0x432b) (int) pci.subsys_product_id = 4992 (0x1380) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Broadcom Corporation' (string) pci.vendor_id = 5348 (0x14e4) (int) udi = '/org/freedesktop/Hal/devices/net_00_21_00_c3_d0_fa' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_432b' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_00_c3_d0_fa' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/0000:08:00.0/net/eth1' (string) net.80211.mac_address = 141746753786 (0x2100c3d0fa) (uint64) net.address = '00:21:00:c3:d0:fa' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth1' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_432b' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_9604' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (PCIE port 0)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9604' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string) pci.product = 'RS780 PCI to PCI bridge (PCIE port 0)' (string) pci.product_id = 38404 (0x9604) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_9602' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 PCI to PCI bridge (int gfx)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9602' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product = 'RS780 PCI to PCI bridge (int gfx)' (string) pci.product_id = 38402 (0x9602) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_9612' info.parent = '/org/freedesktop/Hal/devices/pci_1022_9602' (string) info.product = 'RS780M/RS780MN [Radeon HD 3200 Graphics]' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_9612' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0' (string) pci.product = 'RS780M/RS780MN [Radeon HD 3200 Graphics]' (string) pci.product_id = 38418 (0x9612) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int) udi = '/org/freedesktop/Hal/devices/pci_1002_9612_drm_r300_card0' access_control.file = '/dev/dri/card0' (string) access_control.type = 'video' (string) drm.dri_library = 'r300' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'drm', 'access_control'} (string list) info.category = 'drm' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_9612' (string) info.product = 'Direct Rendering Manager Device' (string) info.subsystem = 'drm' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_9612_drm_r300_card0' (string) info.vendor = 'ATI Technologies Inc' (string) linux.device_file = '/dev/dri/card0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'drm' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0/drm/card0' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_9600' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'RS780 Host Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_9600' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = 'RS780 Host Bridge' (string) pci.product_id = 38400 (0x9600) (int) pci.subsys_product_id = 12357 (0x3045) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/fuse' access_control.file = '/dev/fuse' (string) access_control.type = 'camera' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'access_control'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_1022_9600' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/fuse' (string) Dumped 147 device(s) from the Global Device List. ------------------------------------------------