Dumping 91 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20080926' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = false (bool) power_management.quirk.dpms_on = true (bool) power_management.quirk.dpms_suspend = true (bool) power_management.quirk.vbe_post = true (bool) power_management.quirk.vbemode_restore = true (bool) power_management.quirk.vbestate_restore = true (bool) power_management.quirk.vga_mode_3 = true (bool) power_management.type = 'acpi' (string) system.board.product = 'PIG31T' (string) system.board.serial = '00000000' (string) system.board.vendor = 'Kobian' (string) system.board.version = '1.0' (string) system.chassis.manufacturer = 'Kobian' (string) system.chassis.type = 'Desktop' (string) system.firmware.release_date = '06/27/2008' (string) system.firmware.vendor = 'American Megatrends Inc.' (string) system.firmware.version = '080014' (string) system.formfactor = 'desktop' (string) system.hardware.primary_video.product = 10690 (0x29c2) (int) system.hardware.primary_video.vendor = 32902 (0x8086) (int) system.hardware.product = 'PIG31T' (string) system.hardware.serial = '00000000' (string) system.hardware.uuid = '00020003-0004-0005-0006-000700080009' (string) system.hardware.vendor = 'Kobian' (string) system.hardware.version = '1.0' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.28-11-generic' (string) system.kernel.version.major = 2 (0x2) (int) system.kernel.version.micro = 28 (0x1c) (int) system.kernel.version.minor = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/net_fa_0e_4b_3b_12_ed' info.capabilities = {'net', 'net.bridge'} (string list) info.category = 'net.bridge' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Bridge Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_fa_0e_4b_3b_12_ed' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/pan0' (string) net.address = 'fa:0e:4b:3b:12:ed' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.bridge.mac_address = 274939298648813 (0xfa0e4b3b12ed) (uint64) net.interface = 'pan0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' access_control.file = '/dev/input/event2' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event2' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/acpi_P001' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Celeron(R) CPU 430 @ 1.80GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_P001' (string) linux.acpi_path = '/proc/acpi/processor/P001' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/net_computer_loopback' info.capabilities = {'net', 'net.loopback'} (string list) info.category = 'net.loopback' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Loopback device Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/lo' (string) net.address = '00:00:00:00:00:00' (string) net.arp_proto_hw_id = 772 (0x304) (int) net.interface = 'lo' (string) net.linux.ifindex = 1 (0x1) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event1' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (FF)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event0' (string) input.product = 'Power Button (FF)' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_3' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_INT0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (INT0800)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.id = 'INT0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0103)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.id = 'PNP0103' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0a08)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.id = 'PNP0a08' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event8' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input8/event8' (string) udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (iTCO_wdt)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string) platform.id = 'iTCO_wdt' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (Fixed MDIO bus.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0' (string) platform.id = 'Fixed MDIO bus.0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27da' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) SMBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.product = '82801G (ICH7 Family) SMBus Controller' (string) pci.product_id = 10202 (0x27da) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27b8' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801GB/GR (ICH7 Family) LPC Interface Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b8' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product = '82801GB/GR (ICH7 Family) LPC Interface Bridge' (string) pci.product_id = 10168 (0x27b8) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_244e' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801 PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product = '82801 PCI Bridge' (string) pci.product_id = 9294 (0x244e) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string) pci.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string) pci.product_id = 10188 (0x27cc) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:1d.7' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'Transcend JetFlash Flash Drive' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042' (string) info.vendor = 'Alcor Micro Corp.' (string) linux.device_file = '/dev/bus/usb/001/005' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 257 (0x101) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 5 (0x5) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Transcend JetFlash Flash Drive' (string) usb_device.product_id = 25479 (0x6387) (int) usb_device.serial = 'L0901000000000005042' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Alcor Micro Corp.' (string) usb_device.vendor_id = 1423 (0x58f) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0' info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042' (string) info.product = 'USB Mass Storage Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 257 (0x101) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 5 (0x5) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 25479 (0x6387) (int) usb.serial = 'L0901000000000005042' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Alcor Micro Corp.' (string) usb.vendor_id = 1423 (0x58f) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'Drive AU_USB20' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'FLASH' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_FLASH_Drive_AU_USB20_L0901000000000005042_0_0' access_control.file = '/dev/sda' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FLASH_Drive_AU_USB20_L0901000000000005042_0_0' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_device_lun0' (string) info.product = 'Drive AU_USB20' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_FLASH_Drive_AU_USB20_L0901000000000005042_0_0' (string) info.vendor = 'FLASH' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '8.07' (string) storage.hotpluggable = true (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'Drive AU_USB20' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = true (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 1051721728 (0x3eb00000) (uint64) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'FLASH_Drive_AU_USB20_L0901000000000005042-0:0' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'FLASH' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_0082_BC1F' access_control.file = '/dev/sda1' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FLASH_Drive_AU_USB20_L0901000000000005042_0_0' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'volume', 'block', 'access_control'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_FLASH_Drive_AU_USB20_L0901000000000005042_0_0' (string) info.product = 'Volume (vfat)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_0082_BC1F' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'vfat' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = 'FAT16' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list) volume.mount_point = '/cdrom' (string) volume.num_blocks = 2054081 (0x1f57c1) (uint64) volume.partition.media_size = 1051721728 (0x3eb00000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 32256 (0x7e00) (uint64) volume.size = 1051689472 (0x3eaf8200) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '0082-BC1F' (string) udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_58f_6387_L0901000000000005042_if0_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:1d.7' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string) pci.product_id = 10187 (0x27cb) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.3' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.3' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string) pci.product_id = 10186 (0x27ca) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.2' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string) pci.product_id = 10185 (0x27c9) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'MASTouch USB Touchscreen' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial' (string) info.vendor = 'MASTouch TouchSystems' (string) linux.device_file = '/dev/bus/usb/003/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration = 'HID Touchscreen' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 1 (0x1) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'MASTouch USB Touchscreen' (string) usb_device.product_id = 1 (0x1) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.vendor = 'MASTouch TouchSystems' (string) usb_device.vendor_id = 3577 (0xdf9) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration = 'HID Touchscreen' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 1 (0x1) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 1 (0x1) (int) usb.speed = 1.5 (1.5) (double) usb.vendor = 'MASTouch TouchSystems' (string) usb.vendor_id = 3577 (0xdf9) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0_hiddev' hiddev.application_pages = {'Generic Desktop Page', 'Unknown page 0x00'} (string list) hiddev.device = '/dev/usb/hiddev1' (string) hiddev.product = 'MASTouch TouchSystems MASTouch USB Touchscreen' (string) info.capabilities = {'hiddev'} (string list) info.category = 'hiddev' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0' (string) info.product = 'MASTouch TouchSystems MASTouch USB Touchscreen' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0_hiddev' (string) linux.device_file = '/dev/usb/hiddev1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/usb/hiddev1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0_logicaldev_input' access_control.file = '/dev/input/event7' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0' (string) info.product = 'MASTouch TouchSystems MASTouch USB Touchscreen' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event7' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_df9_1_noserial_if0' (string) input.product = 'MASTouch TouchSystems MASTouch USB Touchscreen' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7/event7' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' info.linux.driver = 'uhci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string) pci.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string) pci.product_id = 10184 (0x27c8) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:1d.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'USB Keyboard' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial' (string) info.vendor = 'Holtek Semiconductor, Inc.' (string) linux.device_file = '/dev/bus/usb/002/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 784 (0x310) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'USB Keyboard' (string) usb_device.product_id = 5635 (0x1603) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.vendor = 'Holtek Semiconductor, Inc.' (string) usb_device.vendor_id = 1241 (0x4d9) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if1' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 784 (0x310) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 5635 (0x1603) (int) usb.speed = 1.5 (1.5) (double) usb.vendor = 'Holtek Semiconductor, Inc.' (string) usb.vendor_id = 1241 (0x4d9) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if1_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if1' (string) info.product = ' USB Keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if1' (string) input.product = ' USB Keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us,ru' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'grp:alt_shift_toggle,lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = ',' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 784 (0x310) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 5635 (0x1603) (int) usb.speed = 1.5 (1.5) (double) usb.vendor = 'Holtek Semiconductor, Inc.' (string) usb.vendor_id = 1241 (0x4d9) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if0_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if0' (string) info.product = ' USB Keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_4d9_1603_noserial_if0' (string) input.product = ' USB Keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us,ru' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'grp:alt_shift_toggle,lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = ',' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'USB Full Speed' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial' (string) info.vendor = 'A4 Tech Co., Ltd' (string) linux.device_file = '/dev/bus/usb/002/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 1542 (0x606) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'USB Full Speed' (string) usb_device.product_id = 32912 (0x8090) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'A4 Tech Co., Ltd' (string) usb_device.vendor_id = 2522 (0x9da) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if1' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 1542 (0x606) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 32912 (0x8090) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'A4 Tech Co., Ltd' (string) usb.vendor_id = 2522 (0x9da) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if1_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if1' (string) info.product = 'A4Tech USB Full Speed' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event4' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if1' (string) input.product = 'A4Tech USB Full Speed' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us,ru' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'grp:alt_shift_toggle,lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = ',' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 1542 (0x606) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 32912 (0x8090) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'A4 Tech Co., Ltd' (string) usb.vendor_id = 2522 (0x9da) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if0_logicaldev_input' access_control.file = '/dev/input/event3' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if0' (string) info.product = 'A4Tech USB Full Speed' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_9da_8090_noserial_if0' (string) input.product = 'A4Tech USB Full Speed' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:1d.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) PCI Express Port 1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string) pci.product = '82801G (ICH7 Family) PCI Express Port 1' (string) pci.product_id = 10192 (0x27d0) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_1969_2048' info.linux.driver = 'atl2' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d0' (string) info.product = 'L2 100 Mbit Ethernet Adapter' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1969_2048' (string) info.vendor = 'Attansic Technology Corp.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0' (string) pci.product = 'L2 100 Mbit Ethernet Adapter' (string) pci.product_id = 8264 (0x2048) (int) pci.subsys_product_id = 8264 (0x2048) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Attansic Technology Corp.' (string) pci.vendor_id = 6505 (0x1969) (int) udi = '/org/freedesktop/Hal/devices/net_00_21_97_93_8f_9b' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_1969_2048' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_97_93_8f_9b' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0' (string) net.80203.mac_address = 144276950939 (0x2197938f9b) (uint64) net.address = '00:21:97:93:8f:9b' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_1969_2048' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801G (ICH7 Family) High Definition Audio Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string) pci.product = '82801G (ICH7 Family) High Definition Audio Controller' (string) pci.product_id = 10200 (0x27d8) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) info.product = 'HDA Intel Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA Intel' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1' access_control.file = '/dev/snd/pcmC0D1p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1p' (string) alsa.device_id = 'VT1708B Digital' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'VT1708B Digital ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1' (string) linux.device_file = '/dev/snd/pcmC0D1p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'VT1708B Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'VT1708B Analog ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'VT1708B Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'VT1708B Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'VT1708B Analog OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'VT1708B Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'VT1708B Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'VT1708B Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA Intel' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'HDA Intel ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'VT1708B Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'VT1708B Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1' access_control.file = '/dev/adsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) info.product = 'VT1708B Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/adsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA Intel' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/adsp' (string) oss.device_id = 'VT1708B Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_29c2' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82G33/G31 Express Integrated Graphics Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_29c2' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.product = '82G33/G31 Express Integrated Graphics Controller' (string) pci.product_id = 10690 (0x29c2) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/pci_8086_29c2_drm_i915_card0' access_control.file = '/dev/dri/card0' (string) access_control.type = 'video' (string) drm.dri_library = 'i915' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'drm', 'access_control'} (string list) info.category = 'drm' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_29c2' (string) info.product = 'Direct Rendering Manager Device' (string) info.subsystem = 'drm' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_29c2_drm_i915_card0' (string) info.vendor = 'Intel Corporation' (string) linux.device_file = '/dev/dri/card0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'drm' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0' (string) udi = '/org/freedesktop/Hal/devices/pci_8086_29c0' info.linux.driver = 'agpgart-intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82G33/G31/P35/P31 Express DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_29c0' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = '82G33/G31/P35/P31 Express DRAM Controller' (string) pci.product_id = 10688 (0x29c0) (int) pci.subsys_product_id = 9859 (0x2683) (int) pci.subsys_vendor = 'Elitegroup Computer Systems' (string) pci.subsys_vendor_id = 4121 (0x1019) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int) udi = '/org/freedesktop/Hal/devices/fuse' access_control.file = '/dev/fuse' (string) access_control.type = 'camera' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'access_control'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_29c0' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/fuse' (string) Dumped 91 device(s) from the Global Device List. ------------------------------------------------