Dumping 140 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) org.freedesktop.Hal.version = '0.5.13' (string) org.freedesktop.Hal.version.major = 0 (0x0) (int) org.freedesktop.Hal.version.micro = 13 (0xd) (int) org.freedesktop.Hal.version.minor = 5 (0x5) (int) power_management.acpi.linux.version = '20090521' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = false (bool) power_management.quirk.dpms_on = true (bool) power_management.quirk.dpms_suspend = true (bool) power_management.quirk.vbe_post = true (bool) power_management.quirk.vbemode_restore = true (bool) power_management.quirk.vbestate_restore = true (bool) power_management.quirk.vga_mode_3 = true (bool) power_management.type = 'acpi' (string) system.board.product = '30E5' (string) system.board.serial = 'None' (string) system.board.vendor = 'Quanta' (string) system.board.version = '88.0A' (string) system.chassis.manufacturer = 'Quanta' (string) system.chassis.type = 'Notebook' (string) system.firmware.release_date = '04/18/2008' (string) system.firmware.vendor = 'Hewlett-Packard' (string) system.firmware.version = 'F.08' (string) system.formfactor = 'laptop' (string) system.formfactor.subtype = 'tabletpc' (string) system.hardware.primary_video.product = 580 (0x244) (int) system.hardware.primary_video.vendor = 4318 (0x10de) (int) system.hardware.product = 'HP Pavilion tx2000 Notebook PC' (string) system.hardware.serial = 'CNF8322YNC' (string) system.hardware.uuid = '434E4638-3332-3259-4E43-001E68C19B94' (string) system.hardware.vendor = 'Hewlett-Packard' (string) system.hardware.version = 'Rev 1' (string) system.kernel.machine = 'x86_64' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.31-16-generic' (string) system.kernel.version.major = 2 (0x2) (int) system.kernel.version.micro = 31 (0x1f) (int) system.kernel.version.minor = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/net_22_c0_5d_82_6c_cd' info.capabilities = {'net', 'net.bridge'} (string list) info.category = 'net.bridge' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Bridge Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_22_c0_5d_82_6c_cd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/pan0' (string) net.address = '22:c0:5d:82:6c:cd' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.bridge.mac_address = 38209597893837 (0x22c05d826ccd) (uint64) net.interface = 'pan0' (string) net.linux.ifindex = 5 (0x5) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' button.has_state = true (bool) button.state.value = false (bool) button.type = 'lid' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.switch', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Lid Switch' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string) input.device = '/dev/input/event3' (string) input.product = 'Lid Switch' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sleep Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event2' (string) input.product = 'Sleep Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event1' (string) input.product = 'Power Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event0' (string) input.product = 'Power Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event6' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Turion(tm) 64 X2 Mobile Technology TL-60' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Turion(tm) 64 X2 Mobile Technology TL-60' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/net_computer_loopback' info.capabilities = {'net', 'net.loopback'} (string list) info.category = 'net.loopback' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Loopback device Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/lo' (string) net.address = '00:00:00:00:00:00' (string) net.arp_proto_hw_id = 772 (0x304) (int) net.interface = 'lo' (string) net.linux.ifindex = 1 (0x1) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event4' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/computer_backlight' info.addons = {'hald-addon-generic-backlight'} (string list) info.capabilities = {'laptop_panel'} (string list) info.category = 'laptop_panel' (string) info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic Backlight Device' (string) info.subsystem = 'backlight' (string) info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string) laptop_panel.access_method = 'general' (string) laptop_panel.brightness_in_hardware = false (bool) laptop_panel.num_levels = 11 (0xb) (int) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'backlight' (string) linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' battery.charge_level.current = 31334 (0x7a66) (int) battery.charge_level.design = 36720 (0x8f70) (int) battery.charge_level.last_full = 31334 (0x7a66) (int) battery.charge_level.percentage = 100 (0x64) (int) battery.charge_level.rate = 0 (0x0) (int) battery.is_rechargeable = true (bool) battery.model = 'Primary' (string) battery.present = true (bool) battery.rechargeable.is_charging = false (bool) battery.rechargeable.is_discharging = false (bool) battery.reporting.current = 4352 (0x1100) (int) battery.reporting.design = 5100 (0x13ec) (int) battery.reporting.last_full = 4352 (0x1100) (int) battery.reporting.rate = -1 (0xffffffff) (int) battery.reporting.technology = 'Li-ion' (string) battery.reporting.unit = 'mAh' (string) battery.serial = '' (string) battery.technology = 'lithium-ion' (string) battery.type = 'primary' (string) battery.vendor = 'Hewlett-Packard' (string) battery.voltage.current = 8200 (0x2008) (int) battery.voltage.design = 7200 (0x1c20) (int) battery.voltage.unit = 'mV' (string) info.capabilities = {'battery'} (string list) info.category = 'battery' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Primary' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0' (string) udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' ac_adapter.present = true (bool) info.capabilities = {'ac_adapter'} (string list) info.category = 'ac_adapter' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Generic AC Adapter Device' (string) info.subsystem = 'power_supply' (string) info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'power_supply' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/ACPI0003:00/power_supply/ACAD' (string) udi = '/org/freedesktop/Hal/devices/pnp_SYN014c' info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (SYN014c)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_SYN014c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string) pnp.id = 'SYN014c' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0103)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.id = 'PNP0103' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0a08)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.id = 'PNP0a08' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (regulatory.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/regulatory.0' (string) platform.id = 'regulatory.0' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.linux.driver = 'psmouse' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' info.capabilities = {'input', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event10' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'SynPS/2 Synaptics TouchPad' (string) input.x11_driver = 'synaptics' (string) linux.device_file = '/dev/input/event10' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input10/event10' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/platform_dock_0' info.docked = true (bool) info.interfaces = {'org.freedesktop.Hal.Device.DockStation'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (dock.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_dock_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/dock.0' (string) org.freedesktop.Hal.Device.DockStation.method_argnames = {''} (string list) org.freedesktop.Hal.Device.DockStation.method_execpaths = {'hal-dockstation-undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_names = {'Undock'} (string list) org.freedesktop.Hal.Device.DockStation.method_signatures = {''} (string list) platform.id = 'dock.0' (string) udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (Fixed MDIO bus.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0' (string) platform.id = 'Fixed MDIO bus.0' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_1103' info.linux.driver = 'k8temp' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string) pci.product_id = 4355 (0x1103) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1102' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string) pci.product_id = 4354 (0x1102) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1101' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] Address Map' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.product = 'K8 [Athlon64/Opteron] Address Map' (string) pci.product_id = 4353 (0x1101) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1100' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string) pci.product_id = 4352 (0x1100) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_269' info.linux.driver = 'forcedeth' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 Ethernet Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_269' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0' (string) pci.product = 'MCP51 Ethernet Controller' (string) pci.product_id = 617 (0x269) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/net_00_1e_68_c1_9b_94' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10de_269' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1e_68_c1_9b_94' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.0/net/eth0' (string) net.80203.mac_address = 130606537620 (0x1e68c19b94) (uint64) net.address = '00:1e:68:c1:9b:94' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_10de_269' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_10de_26c' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 High Definition Audio' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1' (string) pci.product = 'MCP51 High Definition Audio' (string) pci.product_id = 620 (0x26c) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c' (string) info.product = 'HDA Digital PCBeep' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_logicaldev_input' (string) input.device = '/dev/input/event11' (string) input.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c' (string) input.product = 'HDA Digital PCBeep' (string) linux.device_file = '/dev/input/event11' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/input/input11/event11' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c' (string) info.product = 'HDA NVidia Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA NVidia' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_control__1' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.type = 'control' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'HDA NVidia ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0_0' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'ALC861-VD Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'ALC861-VD Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_hw_specific_1' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/hwC0D1' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.type = 'hw_specific' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'HDA NVidia ALSA hardware specific Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_hw_specific_1' (string) linux.device_file = '/dev/snd/hwC0D1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/hwC0D1' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'ALC861-VD Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'ALC861-VD Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_hw_specific_0' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/hwC0D0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.type = 'hw_specific' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'HDA NVidia ALSA hardware specific Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_hw_specific_0' (string) linux.device_file = '/dev/snd/hwC0D0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/hwC0D0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_0' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'ALC861-VD Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'ALC861-VD Analog ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_1' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1p' (string) alsa.device_id = 'ALC861-VD Digital' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'ALC861-VD Digital ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_1' (string) linux.device_file = '/dev/snd/pcmC0D1p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D1p' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_mixer__1' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'ALC861-VD Analog OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'ALC861-VD Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_capture_0' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'ALC861-VD Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'ALC861-VD Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_1' info.capabilities = {'oss'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'ALC861-VD Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/adsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/adsp' (string) oss.device_id = 'ALC861-VD Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_capture_6' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 6 (0x6) (int) alsa.device_file = '/dev/snd/pcmC0D6c' (string) alsa.device_id = 'Si3054 Modem' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.pcm_class = 'modem' (string) alsa.type = 'capture' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'Si3054 Modem ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_capture_6' (string) linux.device_file = '/dev/snd/pcmC0D6c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D6c' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_6' alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 6 (0x6) (int) alsa.device_file = '/dev/snd/pcmC0D6p' (string) alsa.device_id = 'Si3054 Modem' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) alsa.pcm_class = 'modem' (string) alsa.type = 'playback' (string) info.capabilities = {'alsa'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0' (string) info.product = 'Si3054 Modem ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_sound_card_0_alsa_playback_6' (string) linux.device_file = '/dev/snd/pcmC0D6p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/sound/card0/pcmC0D6p' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26f' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 PCI Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26f' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string) pci.product = 'MCP51 PCI Bridge' (string) pci.product_id = 623 (0x26f) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_266' info.linux.driver = 'sata_nv' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 Serial ATA Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_266' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 133 (0x85) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string) pci.product = 'MCP51 Serial ATA Controller' (string) pci.product_id = 614 (0x266) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_266' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host1/scsi_host/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_266' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'FUJITSU MHZ2250B' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0' (string) info.product = 'FUJITSU MHZ2250B' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '8909' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'FUJITSU MHZ2250B' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 250059350016 (0x3a38b2e000) (uint64) storage.requires_eject = false (bool) storage.serial = 'FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) storage.size = 250059350016 (0x3a38b2e000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024' block.device = '/dev/sda3' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 3 (0x3) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda3' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 3 (0x3) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 123329848320 (0x1cb7082400) (uint64) volume.partition.type = '0x05' (string) volume.partition.uuid = '' (string) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_12563EAB563E8F89' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.product = 'Volume (ntfs)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_12563EAB563E8F89' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs-3g' (string) volume.fstype.alternative = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list) volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detach', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list) volume.mount_point = '/media/12563EAB563E8F89' (string) volume.num_blocks = 240877991 (0xe5b81a7) (uint64) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 32256 (0x7e00) (uint64) volume.policy.mount_filesystem = 'ntfs-3g' (string) volume.size = 123329531392 (0x1cb7034e00) (uint64) volume.unmount.ntfs.valid_options = {'lazy'} (string list) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '12563EAB563E8F89' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_165e58d5_0302_446f_8cfa_017c7d09c36e' block.device = '/dev/sda6' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 6 (0x6) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_165e58d5_0302_446f_8cfa_017c7d09c36e' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda6' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 9237312 (0x8cf340) (uint64) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 6 (0x6) (int) volume.partition.start = 233943446016 (0x36781db200) (uint64) volume.size = 4729503744 (0x119e68000) (uint64) volume.uuid = '165e58d5-0302-446f-8cfa-017c7d09c36e' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_fee7b7d6_514d_481c_9f4e_9a4399a0288f' block.device = '/dev/sda5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.product = 'Volume (ext4)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_fee7b7d6_514d_481c_9f4e_9a4399a0288f' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda5' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext4' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list) volume.mount_point = '/' (string) volume.num_blocks = 216042057 (0xce08a49) (uint64) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 123329880576 (0x1cb708a200) (uint64) volume.size = 110613533184 (0x19c1149200) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'fee7b7d6-514d-481c-9f4e-9a4399a0288f' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_2C88743C8874071C' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_FUJITSU_MHZ2250BH_G2_K617T872KS75' (string) info.product = 'HP_RECOVERY' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_2C88743C8874071C' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs-3g' (string) volume.fstype.alternative = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '' (string) volume.ignore = true (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = 'HP_RECOVERY' (string) volume.linux.is_device_mapper = false (bool) volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list) volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detach', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list) volume.mount_point = '' (string) volume.num_blocks = 22233960 (0x1534368) (uint64) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.start = 238672949760 (0x3792043200) (uint64) volume.policy.mount_filesystem = 'ntfs-3g' (string) volume.size = 11383787520 (0x2a686d000) (uint64) volume.unmount.ntfs.valid_options = {'lazy'} (string list) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '2C88743C8874071C' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_266_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_265' info.linux.driver = 'pata_amd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 IDE' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_265' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 138 (0x8a) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string) pci.product = 'MCP51 IDE' (string) pci.product_id = 613 (0x265) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_265' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host3/scsi_host/host3' (string) scsi_host.host = 3 (0x3) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_265' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host2/scsi_host/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host2/target2:0:0/2:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 2 (0x2) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'DVDRAM GSA-T40L' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'HL-DT-ST' (string) udi = '/org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_T40L' block.device = '/dev/sr0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_T40L' (string) info.addons = {'hald-addon-storage'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0' (string) info.product = 'DVDRAM GSA-T40L' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_T40L' (string) info.vendor = 'HL-DT-ST' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host2/target2:0:0/2:0:0:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = true (bool) storage.cdrom.dvdrdl = true (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 4234 (0x108a) (int) storage.cdrom.write_speeds = {'4234', '2822', '1764', '706'} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = 'KC07' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'DVDRAM GSA-T40L' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'HL-DT-ST' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/host2/target2:0:0/2:0:0:0/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_26e' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 USB Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26e' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1' (string) pci.product = 'MCP51 USB Controller' (string) pci.product_id = 622 (0x26e) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26e' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:0b.1' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1' (string) info.product = 'CY7C65640 USB-2.0 "TetraHub"' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial' (string) info.vendor = 'Cypress Semiconductor Corp.' (string) linux.device_file = '/dev/bus/usb/001/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 36885 (0x9015) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2' (string) usb_device.max_power = 174 (0xae) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.product = 'CY7C65640 USB-2.0 "TetraHub"' (string) usb_device.product_id = 25952 (0x6560) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Cypress Semiconductor Corp.' (string) usb_device.vendor_id = 1204 (0x4b4) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 36885 (0x9015) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2:1.0' (string) usb.max_power = 174 (0xae) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 4 (0x4) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 25952 (0x6560) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Cypress Semiconductor Corp.' (string) usb.vendor_id = 1204 (0x4b4) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial' (string) info.product = 'ISD-V4' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial' (string) info.vendor = 'Wacom Co., Ltd' (string) linux.device_file = '/dev/bus/usb/001/006' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 596 (0x254) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 6 (0x6) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'ISD-V4' (string) usb_device.product_id = 147 (0x93) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Wacom Co., Ltd' (string) usb_device.vendor_id = 1386 (0x56a) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1' info.linux.driver = 'wacom' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.1' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 596 (0x254) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 6 (0x6) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.1' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 147 (0x93) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Wacom Co., Ltd' (string) usb.vendor_id = 1386 (0x56a) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input' info.callouts.add = {'hal-setup-wacom'} (string list) info.capabilities = {'input', 'input.tablet'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1' (string) info.product = 'Wacom ISDv4 93' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event8' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1' (string) input.product = 'Wacom ISDv4 93' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'stylus' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.1/input/input8/event8' (string) wacom.types = {'eraser', 'cursor', 'pad'} (string list) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input_subdev_1' info.capabilities = {'input'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input' (string) info.product = 'Wacom ISDv4 93 pad' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input_subdev_1' (string) input.device = '/dev/input/event8' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'pad' (string) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input_subdev_0' info.capabilities = {'input'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input' (string) info.product = 'Wacom ISDv4 93 cursor' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input_subdev_0' (string) input.device = '/dev/input/event8' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'cursor' (string) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input_subdev' info.capabilities = {'input'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input' (string) info.product = 'Wacom ISDv4 93 eraser' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if1_logicaldev_input_subdev' (string) input.device = '/dev/input/event8' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'eraser' (string) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0' info.linux.driver = 'wacom' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 596 (0x254) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 6 (0x6) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 147 (0x93) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Wacom Co., Ltd' (string) usb.vendor_id = 1386 (0x56a) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input' info.callouts.add = {'hal-setup-wacom'} (string list) info.capabilities = {'input', 'input.tablet'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0' (string) info.product = 'Wacom ISDv4 93' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event7' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0' (string) input.product = 'Wacom ISDv4 93' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'stylus' (string) linux.device_file = '/dev/input/event7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.0/input/input7/event7' (string) wacom.types = {'eraser', 'cursor', 'pad'} (string list) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input_subdev_1' info.capabilities = {'input'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input' (string) info.product = 'Wacom ISDv4 93 pad' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input_subdev_1' (string) input.device = '/dev/input/event7' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'pad' (string) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input_subdev_0' info.capabilities = {'input'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input' (string) info.product = 'Wacom ISDv4 93 cursor' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input_subdev_0' (string) input.device = '/dev/input/event7' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'cursor' (string) udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input_subdev' info.capabilities = {'input'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input' (string) info.product = 'Wacom ISDv4 93 eraser' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_93_noserial_if0_logicaldev_input_subdev' (string) input.device = '/dev/input/event7' (string) input.x11_driver = 'wacom' (string) input.x11_options.Type = 'eraser' (string) udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial' (string) info.product = 'AES1600' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' (string) info.vendor = 'AuthenTec, Inc.' (string) linux.device_file = '/dev/bus/usb/001/005' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.2' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 255 (0xff) (int) usb_device.device_protocol = 255 (0xff) (int) usb_device.device_revision_bcd = 3088 (0xc10) (int) usb_device.device_subclass = 255 (0xff) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 5 (0x5) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.2' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'AES1600' (string) usb_device.product_id = 5632 (0x1600) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'AuthenTec, Inc.' (string) usb_device.vendor_id = 2303 (0x8ff) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.2/1-2.2:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 255 (0xff) (int) usb.device_protocol = 255 (0xff) (int) usb.device_revision_bcd = 3088 (0xc10) (int) usb.device_subclass = 255 (0xff) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 5 (0x5) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.2/1-2.2:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 5632 (0x1600) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'AuthenTec, Inc.' (string) usb.vendor_id = 2303 (0x8ff) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4b4_6560_noserial' (string) info.product = 'VGA 24fps UVC Webcam' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001' (string) info.vendor = 'Chicony Electronics Co., Ltd' (string) linux.device_file = '/dev/bus/usb/001/004' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 239 (0xef) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 1542 (0x606) (int) usb_device.device_subclass = 2 (0x2) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 4 (0x4) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'VGA 24fps UVC Webcam' (string) usb_device.product_id = 45077 (0xb015) (int) usb_device.serial = 'SN0001' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Chicony Electronics Co., Ltd' (string) usb_device.vendor_id = 1266 (0x4f2) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if1' info.linux.driver = 'uvcvideo' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001' (string) info.product = 'USB Video Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.1' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 1542 (0x606) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 14 (0xe) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 2 (0x2) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.1' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Video Interface' (string) usb.product_id = 45077 (0xb015) (int) usb.serial = 'SN0001' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Chicony Electronics Co., Ltd' (string) usb.vendor_id = 1266 (0x4f2) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0' info.linux.driver = 'uvcvideo' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001' (string) info.product = 'USB Video Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 239 (0xef) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 1542 (0x606) (int) usb.device_subclass = 2 (0x2) (int) usb.interface.class = 14 (0xe) (int) usb.interface.description = 'HP Webcam' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Video Interface' (string) usb.product_id = 45077 (0xb015) (int) usb.serial = 'SN0001' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Chicony Electronics Co., Ltd' (string) usb.vendor_id = 1266 (0x4f2) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0_logicaldev_input' button.has_state = false (bool) info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0' (string) info.product = 'HP Webcam' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0_logicaldev_input' (string) input.device = '/dev/input/event9' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0' (string) input.product = 'HP Webcam' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.0/input/input9/event9' (string) udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0_video4linux' info.capabilities = {'video4linux', 'video4linux.video_capture'} (string list) info.category = 'video4linux' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0' (string) info.product = 'HP Webcam' (string) info.subsystem = 'video4linux' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_b015_SN0001_if0_video4linux' (string) linux.device_file = '/dev/video0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'video4linux' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.0/video4linux/video0' (string) video4linux.device = '/dev/video0' (string) video4linux.version = '2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0b_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:0b.1' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_10de_26d' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 USB Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_26d' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string) pci.product = 'MCP51 USB Controller' (string) pci.product_id = 621 (0x26d) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_26d' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 8 (0x8) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:0b.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' (string) info.product = 'Wireless (Bluetooth + WLAN) Interface [Integrated Module]' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.vendor = 'Hewlett-Packard' (string) linux.device_file = '/dev/bus/usb/002/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 224 (0xe0) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 1 (0x1) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 4 (0x4) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Wireless (Bluetooth + WLAN) Interface [Integrated Module]' (string) usb_device.product_id = 5917 (0x171d) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Hewlett-Packard' (string) usb_device.vendor_id = 1008 (0x3f0) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if3' info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Application Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.3' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 254 (0xfe) (int) usb.interface.number = 3 (0x3) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.3' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Application Specific Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if2' info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.2' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 2 (0x2) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.2' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if1' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.1' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.1' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' info.linux.driver = 'btusb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial' (string) info.product = 'USB Wireless Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 224 (0xe0) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 1 (0x1) (int) usb.interface.class = 224 (0xe0) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 4 (0x4) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Wireless Interface' (string) usb.product_id = 5917 (0x171d) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Hewlett-Packard' (string) usb.vendor_id = 1008 (0x3f0) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0_bluetooth_hci_0' bluetooth_hci.address = 0 (0x0) (uint64) bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' (string) info.capabilities = {'bluetooth_hci'} (string list) info.category = 'bluetooth_hci' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0' (string) info.product = 'Bluetooth Host Controller Interface' (string) info.subsystem = 'bluetooth' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0_bluetooth_hci_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'bluetooth' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.0/bluetooth/hci0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0_bluetooth_hci_0_rfkill_hci0_bluetooth' info.addons.singleton = {'hald-addon-rfkill-killswitch'} (string list) info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0_bluetooth_hci_0' (string) info.product = 'hci0 bluetooth Killswitch' (string) info.subsystem = 'rfkill' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_171d_noserial_if0_bluetooth_hci_0_rfkill_hci0_bluetooth' (string) killswitch.access_method = 'rfkill' (string) killswitch.name = 'hci0' (string) killswitch.state = 1 (0x1) (int) killswitch.type = 'bluetooth' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'rfkill' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.0/bluetooth/hci0/rfkill0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0b_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 8 (0x8) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:0b.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_10de_271' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 PMU' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_271' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.3' (string) pci.device_class = 11 (0xb) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 64 (0x40) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.3' (string) pci.product = 'MCP51 PMU' (string) pci.product_id = 625 (0x271) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_264' info.linux.driver = 'nForce2_smbus' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 SMBus' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_264' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.1' (string) pci.product = 'MCP51 SMBus' (string) pci.product_id = 612 (0x264) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_260' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 LPC Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_260' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string) pci.product = 'MCP51 LPC Bridge' (string) pci.product_id = 608 (0x260) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_270' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP51 Host Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_270' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) pci.product = 'MCP51 Host Bridge' (string) pci.product_id = 624 (0x270) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_244' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 [Geforce Go 6150]' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_244' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.product = 'C51 [Geforce Go 6150]' (string) pci.product_id = 580 (0x244) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_2fd' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 PCI Express Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fd' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' (string) pci.product = 'C51 PCI Express Bridge' (string) pci.product_id = 765 (0x2fd) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_14e4_4312' info.linux.driver = 'b43-pci-bridge' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_2fd' (string) info.product = 'BCM4312 802.11a/b/g' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4312' (string) info.vendor = 'Broadcom Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0' (string) pci.product = 'BCM4312 802.11a/b/g' (string) pci.product_id = 17170 (0x4312) (int) pci.subsys_product_id = 4977 (0x1371) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Broadcom Corporation' (string) pci.vendor_id = 5348 (0x14e4) (int) udi = '/org/freedesktop/Hal/devices/ssb__null_' info.bus = 'ssb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4312' (string) info.subsystem = 'ssb' (string) info.udi = '/org/freedesktop/Hal/devices/ssb__null_' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'ssb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:1' (string) ssb.bus_id = 'ssb0:1' (string) udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_tx' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_tx' (string) leds.device_name = 'b43-phy0' (string) leds.function = 'tx' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/leds/b43-phy0::tx' (string) udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_radio' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_radio' (string) leds.device_name = 'b43-phy0' (string) leds.function = 'radio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/leds/b43-phy0::radio' (string) udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_rx' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_rx' (string) leds.device_name = 'b43-phy0' (string) leds.function = 'rx' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/leds/b43-phy0::rx' (string) udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e_0' info.capabilities = {'net', 'net.80211control'} (string list) info.category = 'net.80211control' (string) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'Networking Wireless Control Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/net/wmaster0' (string) net.address = '00:21:00:2a:18:6e' (string) net.arp_proto_hw_id = 801 (0x321) (int) net.interface = 'wmaster0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_' (string) udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/net/wlan0' (string) net.80211.mac_address = 141736679534 (0x21002a186e) (uint64) net.address = '00:21:00:2a:18:6e' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'wlan0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_' (string) udi = '/org/freedesktop/Hal/devices/ssb__null__rfkill_phy0_wlan' info.addons.singleton = {'hald-addon-rfkill-killswitch'} (string list) info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'phy0 wlan Killswitch' (string) info.subsystem = 'rfkill' (string) info.udi = '/org/freedesktop/Hal/devices/ssb__null__rfkill_phy0_wlan' (string) killswitch.access_method = 'rfkill' (string) killswitch.name = 'phy0' (string) killswitch.state = 1 (0x1) (int) killswitch.type = 'wlan' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'rfkill' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/ieee80211/phy0/rfkill1' (string) udi = '/org/freedesktop/Hal/devices/ssb__null_' info.bus = 'ssb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4312' (string) info.subsystem = 'ssb' (string) info.udi = '/org/freedesktop/Hal/devices/ssb__null_' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'ssb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:1' (string) ssb.bus_id = 'ssb0:1' (string) udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_tx' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_tx' (string) leds.device_name = 'b43-phy0' (string) leds.function = 'tx' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/leds/b43-phy0::tx' (string) udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_radio' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_radio' (string) leds.device_name = 'b43-phy0' (string) leds.function = 'radio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/leds/b43-phy0::radio' (string) udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_rx' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_b43_phy0_rx' (string) leds.device_name = 'b43-phy0' (string) leds.function = 'rx' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/leds/b43-phy0::rx' (string) udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e_0' info.capabilities = {'net', 'net.80211control'} (string list) info.category = 'net.80211control' (string) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'Networking Wireless Control Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/net/wmaster0' (string) net.address = '00:21:00:2a:18:6e' (string) net.arp_proto_hw_id = 801 (0x321) (int) net.interface = 'wmaster0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_' (string) udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_21_00_2a_18_6e' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/net/wlan0' (string) net.80211.mac_address = 141736679534 (0x21002a186e) (uint64) net.address = '00:21:00:2a:18:6e' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'wlan0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/ssb__null_' (string) udi = '/org/freedesktop/Hal/devices/ssb__null__rfkill_phy0_wlan' info.addons.singleton = {'hald-addon-rfkill-killswitch'} (string list) info.capabilities = {'killswitch'} (string list) info.category = 'killswitch' (string) info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list) info.parent = '/org/freedesktop/Hal/devices/ssb__null_' (string) info.product = 'phy0 wlan Killswitch' (string) info.subsystem = 'rfkill' (string) info.udi = '/org/freedesktop/Hal/devices/ssb__null__rfkill_phy0_wlan' (string) killswitch.access_method = 'rfkill' (string) killswitch.name = 'phy0' (string) killswitch.state = 1 (0x1) (int) killswitch.type = 'wlan' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'rfkill' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/ssb0:0/ieee80211/phy0/rfkill1' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_2fc' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 PCI Express Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fc' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.product = 'C51 PCI Express Bridge' (string) pci.product_id = 764 (0x2fc) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_27e' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Memory Controller 2' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_27e' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7' (string) pci.product = 'C51 Memory Controller 2' (string) pci.product_id = 638 (0x27e) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_27f' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Memory Controller 3' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_27f' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.6' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.6' (string) pci.product = 'C51 Memory Controller 3' (string) pci.product_id = 639 (0x27f) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_2ff' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Host Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2ff' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5' (string) pci.product = 'C51 Host Bridge' (string) pci.product_id = 767 (0x2ff) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_2f9' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Memory Controller 4' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f9' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4' (string) pci.product = 'C51 Memory Controller 4' (string) pci.product_id = 761 (0x2f9) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_2f8' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Memory Controller 5' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f8' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3' (string) pci.product = 'C51 Memory Controller 5' (string) pci.product_id = 760 (0x2f8) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_2fe' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Memory Controller 1' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fe' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2' (string) pci.product = 'C51 Memory Controller 1' (string) pci.product_id = 766 (0x2fe) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_2fa' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Memory Controller 0' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fa' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1' (string) pci.product = 'C51 Memory Controller 0' (string) pci.product_id = 762 (0x2fa) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_2f0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'C51 Host Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f0' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = 'C51 Host Bridge' (string) pci.product_id = 752 (0x2f0) (int) pci.subsys_product_id = 12517 (0x30e5) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/fuse' access_control.file = '/dev/fuse' (string) access_control.type = 'camera' (string) info.capabilities = {'access_control'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10de_2f0' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/fuse' (string) Dumped 140 device(s) from the Global Device List. ------------------------------------------------