[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010 (Ubuntu 2.6.31-20.58-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=1f62cf85-2651-49d5-a78e-04f4ad893d69 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) [ 0.000000] BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1ff30 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back [ 0.000000] 1 base 00F8000000 mask FFFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001ff30000 (usable) [ 0.000000] modified: 000000001ff30000 - 000000001ff40000 (ACPI data) [ 0.000000] modified: 000000001ff40000 - 000000001fff0000 (ACPI NVS) [ 0.000000] modified: 000000001fff0000 - 0000000020000000 (reserved) [ 0.000000] modified: 00000000ff7c0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ff30000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 001fe00000 page 2M [ 0.000000] 001fe00000 - 001ff30000 page 4k [ 0.000000] kernel direct mapping tables up to 1ff30000 @ 10000-13000 [ 0.000000] RAMDISK: 17821000 - 17fa32bb [ 0.000000] ACPI: RSDP 00000000000fabb0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000001ff30000 0002C (v01 A M I OEMRSDT 03000429 MSFT 00000097) [ 0.000000] ACPI: FACP 000000001ff30200 00081 (v01 A M I OEMFACP 03000429 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000001ff303e0 03871 (v01 K8V-F K8V-F001 00000001 MSFT 0100000D) [ 0.000000] ACPI: FACS 000000001ff40000 00040 [ 0.000000] ACPI: APIC 000000001ff30390 0004A (v01 A M I OEMAPIC 03000429 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000001ff30000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000001ff30000 [ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff] [ 0.000000] bootmap [0000000000016000 - 0000000000019fe7] pages 4 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001ff30000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e8c8c] TEXT DATA BSS ==> [0001000000 - 00019e8c8c] [ 0.000000] #3 [0017821000 - 0017fa32bb] RAMDISK ==> [0017821000 - 0017fa32bb] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00019e9000 - 00019e91ac] BRK ==> [00019e9000 - 00019e91ac] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880001e00000-ffff8800025fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ff30 [ 0.000000] On node 0 totalpages: 130751 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 100 pages reserved [ 0.000000] DMA zone: 3827 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1734 pages used for memmap [ 0.000000] DMA32 zone: 125034 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:df7c0000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019f1000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 128861 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=1f62cf85-2651-49d5-a78e-04f4ad893d69 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ f8000000 old size 32 MB [ 0.000000] Aperture from AGP @ f8000000 size 64 MB (APSIZE f30) [ 0.000000] Node 0: aperture @ f8000000 size 64 MB [ 0.000000] Memory: 496748k/523456k available (5327k kernel code, 452k absent, 26256k reserved, 3014k data, 664k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.162 MHz processor. [ 0.000017] spurious 8259A interrupt: IRQ7. [ 0.001182] Console: colour VGA+ 80x25 [ 0.001185] console [tty0] enabled [ 0.006044] allocated 5242880 bytes of page_cgroup [ 0.006047] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.32 BogoMIPS (lpj=20001620) [ 0.010050] Security Framework initialized [ 0.010086] AppArmor: AppArmor initialized [ 0.010166] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.010697] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.010960] Mount-cache hash table entries: 256 [ 0.011149] Initializing cgroup subsys ns [ 0.011153] Initializing cgroup subsys cpuacct [ 0.011158] Initializing cgroup subsys memory [ 0.011171] Initializing cgroup subsys freezer [ 0.011173] Initializing cgroup subsys net_cls [ 0.011189] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.011191] CPU: L2 Cache: 512K (64 bytes/line) [ 0.011195] CPU 0/0x0 -> Node 0 [ 0.011197] tseg: 0000000000 [ 0.011217] mce: CPU supports 5 MCE banks [ 0.011232] Performance Counters: AMD PMU driver. [ 0.011238] ... version: 0 [ 0.011240] ... bit width: 48 [ 0.011241] ... generic counters: 4 [ 0.011243] ... value mask: 0000ffffffffffff [ 0.011246] ... max period: 00007fffffffffff [ 0.011247] ... fixed-purpose counters: 0 [ 0.011249] ... counter mask: 000000000000000f [ 0.011264] SMP alternatives: switching to UP code [ 0.020018] Freeing SMP alternatives: 40k freed [ 0.020056] ACPI: Core revision 20090521 [ 0.030096] Setting APIC routing to flat [ 0.030885] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.138981] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 08 [ 0.140000] Brought up 1 CPUs [ 0.140000] Total of 1 processors activated (4000.32 BogoMIPS). [ 0.140000] CPU0 attaching NULL sched-domain. [ 0.140000] Booting paravirtualized kernel on bare hardware [ 0.140000] regulator: core version 0.5 [ 0.140000] Time: 15:43:10 Date: 04/03/10 [ 0.140000] NET: Registered protocol family 16 [ 0.140000] node 0 link 0: io port [1000, ffffff] [ 0.140000] TOM: 0000000020000000 aka 512M [ 0.140000] node 0 link 0: mmio [a0000, bffff] [ 0.140000] node 0 link 0: mmio [20000000, fe0bffff] [ 0.140000] bus: [00,ff] on node 0 link 0 [ 0.140000] bus: 00 index 0 io port: [0, ffff] [ 0.140000] bus: 00 index 1 mmio: [a0000, bffff] [ 0.140000] bus: 00 index 2 mmio: [20000000, fcffffffff] [ 0.140000] ACPI: bus type pci registered [ 0.140000] PCI: Using configuration type 1 for base access [ 0.140000] bio: create slab at 0 [ 0.140000] ACPI: EC: Look up EC in DSDT [ 0.140000] ACPI Warning: Package List length (5) larger than NumElements count (3), truncated [ 0.140000] 20090521 dsobject-502 [ 0.140000] ACPI: Interpreter enabled [ 0.140000] ACPI: (supports S0 S1 S3 S4 S5) [ 0.140000] ACPI: Using IOAPIC for interrupt routing [ 0.144006] ACPI: No dock devices found. [ 0.144120] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.144174] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] [ 0.144254] pci 0000:00:01.0: supports D1 [ 0.144284] pci 0000:00:07.0: reg 10 32bit mmio: [0xfda00000-0xfda007ff] [ 0.144291] pci 0000:00:07.0: reg 14 io port: [0xdc00-0xdc7f] [ 0.144322] pci 0000:00:07.0: supports D2 [ 0.144324] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold [ 0.144329] pci 0000:00:07.0: PME# disabled [ 0.144358] pci 0000:00:09.0: reg 10 32bit mmio: [0xfdd00000-0xfdd00fff] [ 0.144364] pci 0000:00:09.0: reg 14 io port: [0xec00-0xecff] [ 0.144398] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.144401] pci 0000:00:09.0: PME# disabled [ 0.144433] pci 0000:00:0f.0: reg 10 io port: [0xe800-0xe807] [ 0.144439] pci 0000:00:0f.0: reg 14 io port: [0xe400-0xe403] [ 0.144445] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007] [ 0.144451] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803] [ 0.144457] pci 0000:00:0f.0: reg 20 io port: [0xd400-0xd40f] [ 0.144463] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff] [ 0.144521] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.144585] pci 0000:00:10.0: reg 20 io port: [0xb000-0xb01f] [ 0.144605] pci 0000:00:10.0: supports D1 D2 [ 0.144608] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144611] pci 0000:00:10.0: PME# disabled [ 0.144649] pci 0000:00:10.1: reg 20 io port: [0xb400-0xb41f] [ 0.144669] pci 0000:00:10.1: supports D1 D2 [ 0.144671] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144675] pci 0000:00:10.1: PME# disabled [ 0.144712] pci 0000:00:10.2: reg 20 io port: [0xb800-0xb81f] [ 0.144732] pci 0000:00:10.2: supports D1 D2 [ 0.144734] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144738] pci 0000:00:10.2: PME# disabled [ 0.144776] pci 0000:00:10.3: reg 20 io port: [0xc000-0xc01f] [ 0.144796] pci 0000:00:10.3: supports D1 D2 [ 0.144798] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144802] pci 0000:00:10.3: PME# disabled [ 0.144827] pci 0000:00:10.4: reg 10 32bit mmio: [0xfde00000-0xfde000ff] [ 0.144859] pci 0000:00:10.4: supports D1 D2 [ 0.144861] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144865] pci 0000:00:10.4: PME# disabled [ 0.144915] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.144920] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.144963] pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff] [ 0.144998] pci 0000:00:11.5: supports D1 D2 [ 0.145026] pci 0000:00:11.6: reg 10 io port: [0x00-0xff] [ 0.145086] pci 0000:00:12.0: reg 10 io port: [0xc800-0xc8ff] [ 0.145091] pci 0000:00:12.0: reg 14 32bit mmio: [0xfdf00000-0xfdf000ff] [ 0.145122] pci 0000:00:12.0: supports D1 D2 [ 0.145124] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.145128] pci 0000:00:12.0: PME# disabled [ 0.145214] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.145218] pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff] [ 0.145223] pci 0000:01:00.0: reg 18 32bit mmio: [0xfd600000-0xfd60ffff] [ 0.145232] pci 0000:01:00.0: reg 30 32bit mmio: [0xfd500000-0xfd51ffff] [ 0.145244] pci 0000:01:00.0: supports D1 D2 [ 0.145261] pci 0000:01:00.1: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.145265] pci 0000:01:00.1: reg 14 32bit mmio: [0xfd400000-0xfd40ffff] [ 0.145283] pci 0000:01:00.1: supports D1 D2 [ 0.145309] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.145313] pci 0000:00:01.0: bridge 32bit mmio: [0xfd100000-0xfd6fffff] [ 0.145317] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xf7efffff] [ 0.145326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.152010] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.152101] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 0.152191] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 0.152279] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.152368] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.152457] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.152546] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.152640] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.152837] SCSI subsystem initialized [ 0.152929] libata version 3.00 loaded. [ 0.153007] usbcore: registered new interface driver usbfs [ 0.153025] usbcore: registered new interface driver hub [ 0.153054] usbcore: registered new device driver usb [ 0.153179] ACPI: WMI: Mapper loaded [ 0.153181] PCI: Using ACPI for IRQ routing [ 0.153192] pci 0000:00:00.0: BAR 0: address space collision on of device [0xf8000000-0xfbffffff] [ 0.153195] pci 0000:00:00.0: BAR 0: can't allocate resource [ 0.153344] Bluetooth: Core ver 2.15 [ 0.153378] NET: Registered protocol family 31 [ 0.153379] Bluetooth: HCI device and connection manager initialized [ 0.153383] Bluetooth: HCI socket layer initialized [ 0.153385] NetLabel: Initializing [ 0.153387] NetLabel: domain hash size = 128 [ 0.153388] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.153405] NetLabel: unlabeled traffic allowed by default [ 0.153483] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188] [ 0.156538] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 0.158554] pnp: PnP ACPI init [ 0.158582] ACPI: bus type pnp registered [ 0.160534] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160538] pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160542] pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160545] pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160548] pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160552] pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160555] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160559] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160562] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160565] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160569] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160572] pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.160576] pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.161564] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.161567] pnp 00:0c: mem resource (0xc0000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.161571] pnp 00:0c: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.161575] pnp 00:0c: mem resource (0x100000-0x1ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.161866] pnp: PnP ACPI: found 13 devices [ 0.161868] ACPI: ACPI bus type pnp unregistered [ 0.161886] system 00:09: ioport range 0x295-0x296 has been reserved [ 0.161890] system 00:09: ioport range 0x3e1-0x3e7 has been reserved [ 0.161892] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.161895] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.161898] system 00:09: ioport range 0x400-0x41f has been reserved [ 0.161905] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.161908] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.161911] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved [ 0.166583] AppArmor: AppArmor Filesystem Enabled [ 0.166615] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.166618] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.166623] pci 0000:00:01.0: MEM window: 0xfd100000-0xfd6fffff [ 0.166627] pci 0000:00:01.0: PREFETCH window: 0xd7f00000-0xf7efffff [ 0.166640] pci 0000:00:01.0: setting latency timer to 64 [ 0.166646] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.166649] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.166652] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.166655] pci_bus 0000:01: resource 1 mem: [0xfd100000-0xfd6fffff] [ 0.166657] pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xf7efffff] [ 0.166702] NET: Registered protocol family 2 [ 0.166809] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.167128] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.167348] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.167547] TCP: Hash tables configured (established 16384 bind 16384) [ 0.167550] TCP reno registered [ 0.167656] NET: Registered protocol family 1 [ 0.167734] Trying to unpack rootfs image as initramfs... [ 0.373975] Freeing initrd memory: 7688k freed [ 0.381624] Scanning for low memory corruption every 60 seconds [ 0.381796] audit: initializing netlink socket (disabled) [ 0.381816] type=2000 audit(1270309390.379:1): initialized [ 0.391369] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.392761] VFS: Disk quotas dquot_6.5.2 [ 0.392814] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.393425] fuse init (API version 7.12) [ 0.393505] msgmni has been set to 985 [ 0.393729] alg: No test for stdrng (krng) [ 0.393741] io scheduler noop registered [ 0.393743] io scheduler anticipatory registered [ 0.393745] io scheduler deadline registered [ 0.393789] io scheduler cfq registered (default) [ 0.393803] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.393896] pci 0000:01:00.0: Boot video device [ 0.394011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.394033] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.394155] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.394160] ACPI: Power Button [PWRF] [ 0.394218] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.394224] ACPI: Power Button [PWRB] [ 0.394268] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.394273] ACPI: Sleep Button [SLPB] [ 0.394443] ACPI: processor limited to max C-state 1 [ 0.394473] processor LNXCPU:00: registered as cooling_device0 [ 0.397529] Linux agpgart interface v0.103 [ 0.397542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.397636] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.397904] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.397989] alloc irq_desc for 16 on node 0 [ 0.397992] alloc kstat_irqs on node 0 [ 0.398002] serial 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.398082] 0000:00:09.0: ttyS1 at I/O 0xec08 (irq = 16) is a 16450 [ 0.398132] 0000:00:09.0: ttyS2 at I/O 0xec10 (irq = 16) is a 8250 [ 0.398180] 0000:00:09.0: ttyS3 at I/O 0xec18 (irq = 16) is a 16450 [ 0.398198] Couldn't register serial port 0000:00:09.0: -28 [ 0.399113] brd: module loaded [ 0.399536] loop: module loaded [ 0.399618] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.400237] pata_via 0000:00:0f.1: version 0.3.4 [ 0.400258] alloc irq_desc for 20 on node 0 [ 0.400261] alloc kstat_irqs on node 0 [ 0.400269] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.400478] scsi0 : pata_via [ 0.400587] scsi1 : pata_via [ 0.402529] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.402532] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.402781] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.402833] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.403159] Fixed MDIO Bus: probed [ 0.403196] PPP generic driver version 2.4.2 [ 0.403321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.403356] alloc irq_desc for 21 on node 0 [ 0.403358] alloc kstat_irqs on node 0 [ 0.403364] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.403384] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.403429] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.403505] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfde00000 [ 0.419990] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.420071] usb usb1: configuration #1 chosen from 1 choice [ 0.420099] hub 1-0:1.0: USB hub found [ 0.420108] hub 1-0:1.0: 8 ports detected [ 0.420176] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.420196] uhci_hcd: USB Universal Host Controller Interface driver [ 0.420297] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.420304] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.420332] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.420354] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000 [ 0.420436] usb usb2: configuration #1 chosen from 1 choice [ 0.420458] hub 2-0:1.0: USB hub found [ 0.420467] hub 2-0:1.0: 2 ports detected [ 0.420532] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.420541] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.420567] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.420586] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400 [ 0.420664] usb usb3: configuration #1 chosen from 1 choice [ 0.420685] hub 3-0:1.0: USB hub found [ 0.420694] hub 3-0:1.0: 2 ports detected [ 0.420758] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.420763] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.420790] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.420809] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800 [ 0.420885] usb usb4: configuration #1 chosen from 1 choice [ 0.420921] hub 4-0:1.0: USB hub found [ 0.420928] hub 4-0:1.0: 2 ports detected [ 0.420986] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.420992] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.421033] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.421052] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c000 [ 0.421130] usb usb5: configuration #1 chosen from 1 choice [ 0.421155] hub 5-0:1.0: USB hub found [ 0.421164] hub 5-0:1.0: 2 ports detected [ 0.421253] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.421660] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.421666] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.421728] mice: PS/2 mouse device common for all mice [ 0.421824] rtc_cmos 00:02: RTC can wake from S4 [ 0.421863] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.421913] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.422061] device-mapper: uevent: version 1.0.3 [ 0.422185] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.422236] device-mapper: multipath: version 1.1.0 loaded [ 0.422239] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.422371] cpuidle: using governor ladder [ 0.422373] cpuidle: using governor menu [ 0.422819] TCP cubic registered [ 0.422945] NET: Registered protocol family 10 [ 0.423398] lo: Disabled Privacy Extensions [ 0.423687] NET: Registered protocol family 17 [ 0.423707] Bluetooth: L2CAP ver 2.13 [ 0.423709] Bluetooth: L2CAP socket layer initialized [ 0.423712] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.423714] Bluetooth: SCO socket layer initialized [ 0.423747] Bluetooth: RFCOMM TTY layer initialized [ 0.423750] Bluetooth: RFCOMM socket layer initialized [ 0.423752] Bluetooth: RFCOMM ver 1.11 [ 0.423771] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 0.423824] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 [ 0.423827] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 0.423829] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0xa [ 0.423866] powernow-k8: ph2 null fid transition 0xc [ 0.423945] PM: Resume from disk failed. [ 0.423959] registered taskstats version 1 [ 0.424112] Magic number: 6:486:739 [ 0.424212] rtc_cmos 00:02: setting system clock to 2010-04-03 15:43:10 UTC (1270309390) [ 0.424215] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.424217] EDD information not available. [ 0.441413] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.640513] ata1.00: ATA-6: ST3200021A, 3.01, max UDMA/100 [ 0.640516] ata1.00: 390721968 sectors, multi 16: LBA48 [ 0.669988] Switched to high resolution mode on CPU 0 [ 0.680656] ata1.00: configured for UDMA/100 [ 0.680778] scsi 0:0:0:0: Direct-Access ATA ST3200021A 3.01 PQ: 0 ANSI: 5 [ 0.680892] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.680933] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 0.680975] sd 0:0:0:0: [sda] Write Protect is off [ 0.680978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.681000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.681116] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 0.759286] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.880345] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0017, max UDMA/33 [ 0.880376] ata2.01: ATAPI: _NEC DVD+RW ND-2100AD, 1.81, max UDMA/33 [ 0.920580] ata2.00: configured for UDMA/33 [ 0.960282] ata2.01: configured for UDMA/33 [ 0.974799] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0017 PQ: 0 ANSI: 5 [ 0.980009] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 0.991489] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [ 0.991492] Uniform CD-ROM driver Revision: 3.20 [ 0.991568] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.991612] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.992581] scsi 1:0:1:0: CD-ROM _NEC DVD+RW ND-2100AD 1.81 PQ: 0 ANSI: 5 [ 0.994768] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 0.994837] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 0.994875] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 0.994901] Freeing unused kernel memory: 664k freed [ 0.995439] Write protecting the kernel read-only data: 7596k [ 1.154120] usb 1-8: configuration #1 chosen from 1 choice [ 1.216322] ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.221416] Floppy drive(s): fd0 is 1.44M [ 1.250238] FDC 0 is a post-1991 82077 [ 1.272786] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fda00000-fda007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.293439] sata_via 0000:00:0f.0: version 2.4 [ 1.293459] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.293518] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 1.293608] scsi2 : sata_via [ 1.293687] scsi3 : sata_via [ 1.295114] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20 [ 1.295117] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20 [ 1.355754] [drm] Initialized drm 1.1.0 20060810 [ 1.371299] Initializing USB Mass Storage driver... [ 1.371444] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.371538] usbcore: registered new interface driver usb-storage [ 1.371540] USB Mass Storage support registered. [ 1.371547] usb-storage: device found at 4 [ 1.371548] usb-storage: waiting for device to settle before scanning [ 1.450030] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.540056] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.641239] usb 2-2: configuration #1 chosen from 1 choice [ 1.760013] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.791147] [drm] radeon default to kernel modesetting DISABLED. [ 1.791288] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.791448] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 1.794995] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.795626] alloc irq_desc for 23 on node 0 [ 1.795629] alloc kstat_irqs on node 0 [ 1.795639] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.796282] eth0: VIA Rhine II at 0xfdf00000, 00:0e:a6:81:98:ba, IRQ 23. [ 1.796991] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. [ 1.930018] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.230155] usb 3-2: configuration #1 chosen from 1 choice [ 2.630145] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800005e6ab1] [ 2.771530] PM: Starting manual resume from disk [ 2.771536] PM: Resume from partition 8:6 [ 2.771538] PM: Checking hibernation image. [ 2.771748] PM: Resume from disk failed. [ 2.791475] EXT4-fs (sda5): barriers enabled [ 2.804331] kjournald2 starting: pid 357, dev sda5:8, commit interval 5 seconds [ 2.804370] EXT4-fs (sda5): delayed allocation enabled [ 2.804374] EXT4-fs: file extents enabled [ 2.804639] EXT4-fs: mballoc enabled [ 2.804657] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 3.452422] type=1505 audit(1270309393.525:2): operation="profile_load" pid=381 name=/usr/share/gdm/guest-session/Xsession [ 3.455241] type=1505 audit(1270309393.525:3): operation="profile_load" pid=382 name=/sbin/dhclient3 [ 3.455544] type=1505 audit(1270309393.525:4): operation="profile_load" pid=382 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.455714] type=1505 audit(1270309393.525:5): operation="profile_load" pid=382 name=/usr/lib/connman/scripts/dhclient-script [ 3.505980] type=1505 audit(1270309393.575:6): operation="profile_load" pid=383 name=/usr/bin/evince [ 3.511302] type=1505 audit(1270309393.585:7): operation="profile_load" pid=383 name=/usr/bin/evince-previewer [ 3.514412] type=1505 audit(1270309393.585:8): operation="profile_load" pid=383 name=/usr/bin/evince-thumbnailer [ 3.552692] type=1505 audit(1270309393.625:9): operation="profile_load" pid=385 name=/usr/bin/freshclam [ 3.568585] type=1505 audit(1270309393.635:10): operation="profile_load" pid=386 name=/usr/lib/cups/backend/cups-pdf [ 6.370496] usb-storage: device scan complete [ 6.371580] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0 [ 6.372689] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0 [ 6.373687] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0 [ 6.374686] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0 [ 6.375090] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 6.375175] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 6.375267] sd 4:0:0:2: Attached scsi generic sg5 type 0 [ 6.375351] sd 4:0:0:3: Attached scsi generic sg6 type 0 [ 6.382309] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 6.383682] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 6.385057] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 6.386429] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 16.548578] Adding 1477940k swap on /dev/sda6. Priority:-1 extents:1 across:1477940k [ 16.566293] EXT4-fs (sda5): internal journal on sda5:8 [ 17.158035] udev: starting version 147 [ 17.994098] Linux video capture interface: v2.00 [ 18.012532] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.159772] lp: driver loaded but no devices found [ 18.233539] pwc: Philips webcam module version 10.0.13 loaded. [ 18.233543] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 18.233546] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 18.233548] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 18.233577] pwc: Logitech QuickCam 4000 Pro USB webcam detected. [ 18.233642] pwc: Registered as /dev/video0. [ 18.238946] input: PWC snapshot button as /devices/pci0000:00/0000:00:10.1/usb3/3-2/input/input5 [ 18.239041] usbcore: registered new interface driver Philips webcam [ 18.308898] EDAC MC: Ver: 2.1.0 Mar 12 2010 [ 18.321461] parport_pc 00:08: reported by Plug and Play ACPI [ 18.321564] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 18.353913] EDAC amd64_edac: Ver: 3.2.0 Mar 12 2010 [ 18.354020] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 18.354024] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 18.354027] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 18.354029] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 18.354030] Might be a BIOS bug, if BIOS says ECC is enabled [ 18.354031] Use of the override can cause unknown side effects. [ 18.354064] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 18.400201] lp0: using parport0 (interrupt-driven). [ 18.436447] ppdev: user-space parallel port driver [ 19.135791] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 19.174113] usbcore: registered new interface driver snd-usb-audio [ 19.220778] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 19.220788] alloc irq_desc for 22 on node 0 [ 19.220791] alloc kstat_irqs on node 0 [ 19.220801] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 19.353356] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.375127] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 19.970019] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 20.480232] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled [ 20.480292] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 20.481200] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 20.481360] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 20.779341] nf_conntrack version 0.5.0 (4089 buckets, 16356 max) [ 20.779778] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 20.779780] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 20.779782] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.683827] usplash:320 freeing invalid memtype ffffffffe8000000-fffffffff0000000 [ 22.917360] Unknown InputIN=eth0 OUT= MAC= SRC=192.168.2.2 DST=224.0.0.251 LEN=335 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=315 [ 23.584570] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge [ 23.584591] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 23.584657] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 23.680348] Unknown InputIN=eth0 OUT= MAC=00:0e:a6:81:98:ba:00:11:50:2f:ad:94:08:00 SRC=192.168.2.1 DST=192.168.2.2 LEN=126 TOS=0x00 PREC=0x00 TTL=128 ID=15 PROTO=UDP SPT=53 DPT=37003 LEN=106 [ 23.715831] Unknown InputIN=eth0 OUT= MAC=00:0e:a6:81:98:ba:00:11:50:2f:ad:94:08:00 SRC=192.168.2.1 DST=192.168.2.2 LEN=126 TOS=0x00 PREC=0x00 TTL=128 ID=17 PROTO=UDP SPT=53 DPT=60030 LEN=106 [ 23.805440] [drm] Setting GART location based on new memory map [ 23.805451] [drm] Loading R200 Microcode [ 23.805518] [drm] writeback test succeeded in 1 usecs [ 23.819034] __ratelimit: 9 callbacks suppressed [ 23.819039] type=1505 audit(1270305813.885:14): operation="profile_replace" pid=1503 name=/usr/share/gdm/guest-session/Xsession [ 23.821120] type=1505 audit(1270305813.895:15): operation="profile_replace" pid=1504 name=/sbin/dhclient3 [ 23.821421] type=1505 audit(1270305813.895:16): operation="profile_replace" pid=1504 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 23.821589] type=1505 audit(1270305813.895:17): operation="profile_replace" pid=1504 name=/usr/lib/connman/scripts/dhclient-script [ 23.828319] type=1505 audit(1270305813.895:18): operation="profile_replace" pid=1505 name=/usr/bin/evince [ 23.834865] type=1505 audit(1270305813.905:19): operation="profile_replace" pid=1505 name=/usr/bin/evince-previewer [ 23.837948] type=1505 audit(1270305813.905:20): operation="profile_replace" pid=1505 name=/usr/bin/evince-thumbnailer [ 23.846594] type=1505 audit(1270305813.915:21): operation="profile_replace" pid=1508 name=/usr/bin/freshclam [ 23.848732] type=1505 audit(1270305813.915:22): operation="profile_replace" pid=1509 name=/usr/lib/cups/backend/cups-pdf [ 23.849105] type=1505 audit(1270305813.915:23): operation="profile_replace" pid=1509 name=/usr/sbin/cupsd [ 23.970098] Unknown InputIN=eth0 OUT= MAC=00:0e:a6:81:98:ba:00:11:50:2f:ad:94:08:00 SRC=192.168.2.1 DST=192.168.2.2 LEN=76 TOS=0x00 PREC=0x00 TTL=128 ID=19 PROTO=UDP SPT=53 DPT=34738 LEN=56 [ 24.134924] Unknown InputIN=eth0 OUT= MAC=00:0e:a6:81:98:ba:00:11:50:2f:ad:94:08:00 SRC=91.189.94.4 DST=192.168.2.2 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 [ 24.161770] Unknown InputIN=eth0 OUT= MAC=00:0e:a6:81:98:ba:00:11:50:2f:ad:94:08:00 SRC=91.189.94.4 DST=192.168.2.2 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 [ 24.188360] Unknown InputIN=eth0 OUT= MAC=00:0e:a6:81:98:ba:00:11:50:2f:ad:94:08:00 SRC=91.189.94.4 DST=192.168.2.2 LEN=76 TOS=0x00 PREC=0x00 TTL=48 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 [ 24.423336] serial8250: too much work for irq16 [ 24.439984] serial8250: too much work for irq16 [ 24.456650] serial8250: too much work for irq16 [ 24.473322] serial8250: too much work for irq16 [ 24.489972] serial8250: too much work for irq16 [ 24.506639] serial8250: too much work for irq16 [ 24.523301] serial8250: too much work for irq16 [ 24.539969] serial8250: too much work for irq16 [ 24.556614] serial8250: too much work for irq16 [ 24.573282] serial8250: too much work for irq16 [ 24.589946] serial8250: too much work for irq16 [ 24.606607] serial8250: too much work for irq16 [ 24.623270] serial8250: too much work for irq16 [ 24.639927] serial8250: too much work for irq16 [ 24.656590] serial8250: too much work for irq16 [ 24.673248] serial8250: too much work for irq16 [ 24.689906] serial8250: too much work for irq16 [ 24.706564] serial8250: too much work for irq16 [ 24.723236] serial8250: too much work for irq16 [ 24.739884] serial8250: too much work for irq16 [ 24.756547] serial8250: too much work for irq16 [ 24.773210] serial8250: too much work for irq16 [ 24.789862] serial8250: too much work for irq16 [ 24.806530] serial8250: too much work for irq16 [ 24.823192] serial8250: too much work for irq16 [ 24.839846] serial8250: too much work for irq16 [ 24.856508] serial8250: too much work for irq16 [ 24.873176] serial8250: too much work for irq16 [ 24.889823] serial8250: too much work for irq16 [ 24.906500] serial8250: too much work for irq16 [ 24.923156] serial8250: too much work for irq16 [ 24.939821] serial8250: too much work for irq16 [ 24.956479] serial8250: too much work for irq16 [ 24.973136] serial8250: too much work for irq16 [ 24.989805] serial8250: too much work for irq16 [ 25.006461] serial8250: too much work for irq16 [ 25.023123] serial8250: too much work for irq16 [ 25.039790] serial8250: too much work for irq16 [ 25.056446] serial8250: too much work for irq16 [ 25.073105] serial8250: too much work for irq16 [ 25.089791] serial8250: too much work for irq16 [ 25.106426] serial8250: too much work for irq16 [ 25.123087] serial8250: too much work for irq16 [ 25.139748] serial8250: too much work for irq16 [ 25.156405] serial8250: too much work for irq16 [ 25.173072] serial8250: too much work for irq16 [ 25.189730] serial8250: too much work for irq16 [ 25.206393] serial8250: too much work for irq16 [ 25.223056] serial8250: too much work for irq16 [ 25.239712] serial8250: too much work for irq16 [ 25.256374] serial8250: too much work for irq16 [ 25.273031] serial8250: too much work for irq16 [ 25.289688] serial8250: too much work for irq16 [ 25.306359] serial8250: too much work for irq16 [ 25.323016] serial8250: too much work for irq16 [ 25.339675] serial8250: too much work for irq16 [ 25.356333] serial8250: too much work for irq16 [ 25.372999] serial8250: too much work for irq16 [ 25.389665] serial8250: too much work for irq16 [ 25.406316] serial8250: too much work for irq16 [ 25.422980] serial8250: too much work for irq16 [ 25.439632] serial8250: too much work for irq16 [ 25.456299] serial8250: too much work for irq16 [ 25.472965] serial8250: too much work for irq16 [ 25.489613] serial8250: too much work for irq16 [ 25.506281] serial8250: too much work for irq16 [ 25.522945] serial8250: too much work for irq16 [ 25.539599] serial8250: too much work for irq16 [ 25.556261] serial8250: too much work for irq16 [ 25.572931] serial8250: too much work for irq16 [ 25.589578] serial8250: too much work for irq16 [ 25.606244] serial8250: too much work for irq16 [ 25.622908] serial8250: too much work for irq16 [ 25.639561] serial8250: too much work for irq16 [ 25.656227] serial8250: too much work for irq16 [ 25.672894] serial8250: too much work for irq16 [ 25.689543] serial8250: too much work for irq16 [ 25.706207] serial8250: too much work for irq16 [ 25.722875] serial8250: too much work for irq16 [ 25.739525] serial8250: too much work for irq16 [ 25.756190] serial8250: too much work for irq16 [ 25.772858] serial8250: too much work for irq16 [ 25.789505] serial8250: too much work for irq16 [ 25.806179] serial8250: too much work for irq16 [ 25.822839] serial8250: too much work for irq16 [ 25.839501] serial8250: too much work for irq16 [ 25.856158] serial8250: too much work for irq16 [ 25.872823] serial8250: too much work for irq16 [ 25.889498] serial8250: too much work for irq16 [ 25.906151] serial8250: too much work for irq16 [ 25.922801] serial8250: too much work for irq16 [ 25.939469] serial8250: too much work for irq16 [ 25.956126] serial8250: too much work for irq16 [ 25.972788] serial8250: too much work for irq16 [ 25.989440] serial8250: too much work for irq16 [ 26.006110] serial8250: too much work for irq16 [ 26.022768] serial8250: too much work for irq16 [ 26.039421] serial8250: too much work for irq16 [ 26.056091] serial8250: too much work for irq16 [ 26.072752] serial8250: too much work for irq16 [ 26.089409] serial8250: too much work for irq16 [ 26.106065] serial8250: too much work for irq16 [ 26.122741] serial8250: too much work for irq16 [ 26.139396] serial8250: too much work for irq16 [ 26.156069] serial8250: too much work for irq16 [ 26.172747] serial8250: too much work for irq16 [ 26.189403] serial8250: too much work for irq16 [ 26.206082] serial8250: too much work for irq16 [ 26.222757] serial8250: too much work for irq16 [ 26.239409] serial8250: too much work for irq16 [ 26.256086] serial8250: too much work for irq16 [ 26.272764] serial8250: too much work for irq16 [ 26.289417] serial8250: too much work for irq16 [ 26.306096] serial8250: too much work for irq16 [ 26.322773] serial8250: too much work for irq16 [ 26.339427] serial8250: too much work for irq16 [ 26.356103] serial8250: too much work for irq16 [ 26.372779] serial8250: too much work for irq16 [ 26.389433] serial8250: too much work for irq16 [ 26.406110] serial8250: too much work for irq16 [ 26.422784] serial8250: too much work for irq16 [ 26.439439] serial8250: too much work for irq16 [ 26.456120] serial8250: too much work for irq16 [ 26.472796] serial8250: too much work for irq16 [ 26.489464] serial8250: too much work for irq16 [ 26.506126] serial8250: too much work for irq16 [ 26.522802] serial8250: too much work for irq16 [ 26.539458] serial8250: too much work for irq16 [ 26.556131] serial8250: too much work for irq16 [ 26.572807] serial8250: too much work for irq16 [ 26.589478] serial8250: too much work for irq16 [ 26.606139] serial8250: too much work for irq16 [ 26.622824] serial8250: too much work for irq16 [ 26.639470] serial8250: too much work for irq16 [ 26.656143] serial8250: too much work for irq16 [ 26.672827] serial8250: too much work for irq16 [ 26.689486] serial8250: too much work for irq16 [ 26.706164] serial8250: too much work for irq16 [ 26.722832] serial8250: too much work for irq16 [ 26.739501] serial8250: too much work for irq16 [ 26.756182] serial8250: too much work for irq16 [ 26.772843] serial8250: too much work for irq16 [ 26.789504] serial8250: too much work for irq16 [ 26.806177] serial8250: too much work for irq16 [ 26.822845] serial8250: too much work for irq16 [ 26.839510] serial8250: too much work for irq16 [ 26.856183] serial8250: too much work for irq16 [ 26.872859] serial8250: too much work for irq16 [ 26.889523] serial8250: too much work for irq16 [ 26.906194] serial8250: too much work for irq16 [ 26.922863] serial8250: too much work for irq16 [ 26.939533] serial8250: too much work for irq16 [ 26.956199] serial8250: too much work for irq16 [ 26.972863] serial8250: too much work for irq16 [ 26.989537] serial8250: too much work for irq16 [ 27.006197] serial8250: too much work for irq16 [ 27.022876] serial8250: too much work for irq16 [ 27.039538] serial8250: too much work for irq16 [ 27.056214] serial8250: too much work for irq16 [ 27.072874] serial8250: too much work for irq16 [ 27.089552] serial8250: too much work for irq16 [ 27.106214] serial8250: too much work for irq16 [ 27.122890] serial8250: too much work for irq16 [ 27.139551] serial8250: too much work for irq16 [ 27.156229] serial8250: too much work for irq16 [ 27.172895] serial8250: too much work for irq16 [ 27.189566] serial8250: too much work for irq16 [ 27.206235] serial8250: too much work for irq16 [ 27.222906] serial8250: too much work for irq16 [ 27.239586] serial8250: too much work for irq16 [ 27.256243] serial8250: too much work for irq16 [ 27.272910] serial8250: too much work for irq16 [ 27.289584] serial8250: too much work for irq16 [ 27.306254] serial8250: too much work for irq16 [ 27.322919] serial8250: too much work for irq16 [ 27.339586] serial8250: too much work for irq16 [ 27.356257] serial8250: too much work for irq16 [ 27.372921] serial8250: too much work for irq16 [ 27.389594] serial8250: too much work for irq16 [ 27.406259] serial8250: too much work for irq16 [ 27.422934] serial8250: too much work for irq16 [ 27.439599] serial8250: too much work for irq16 [ 27.456274] serial8250: too much work for irq16 [ 27.472948] serial8250: too much work for irq16 [ 27.489612] serial8250: too much work for irq16 [ 27.506287] serial8250: too much work for irq16 [ 27.522946] serial8250: too much work for irq16 [ 27.539615] serial8250: too much work for irq16 [ 27.556279] serial8250: too much work for irq16 [ 27.572956] serial8250: too much work for irq16 [ 27.589626] serial8250: too much work for irq16 [ 27.606298] serial8250: too much work for irq16 [ 27.622962] serial8250: too much work for irq16 [ 27.639628] serial8250: too much work for irq16 [ 27.656299] serial8250: too much work for irq16 [ 27.672966] serial8250: too much work for irq16 [ 27.689640] serial8250: too much work for irq16 [ 27.706309] serial8250: too much work for irq16 [ 27.722981] serial8250: too much work for irq16 [ 27.739635] serial8250: too much work for irq16 [ 27.756306] serial8250: too much work for irq16 [ 27.772991] serial8250: too much work for irq16 [ 27.789637] serial8250: too much work for irq16 [ 27.806315] serial8250: too much work for irq16 [ 27.822993] serial8250: too much work for irq16 [ 27.839648] serial8250: too much work for irq16 [ 27.856320] serial8250: too much work for irq16 [ 27.872999] serial8250: too much work for irq16 [ 27.889651] serial8250: too much work for irq16 [ 27.906332] serial8250: too much work for irq16 [ 27.923004] serial8250: too much work for irq16 [ 27.939660] serial8250: too much work for irq16 [ 27.956335] serial8250: too much work for irq16 [ 27.973015] serial8250: too much work for irq16 [ 27.989683] serial8250: too much work for irq16 [ 28.006351] serial8250: too much work for irq16 [ 28.023021] serial8250: too much work for irq16 [ 28.039692] serial8250: too much work for irq16 [ 28.056360] serial8250: too much work for irq16 [ 28.073030] serial8250: too much work for irq16 [ 28.089689] serial8250: too much work for irq16 [ 28.106372] serial8250: too much work for irq16 [ 28.123051] serial8250: too much work for irq16 [ 28.139708] serial8250: too much work for irq16 [ 28.156368] serial8250: too much work for irq16 [ 28.173045] serial8250: too much work for irq16 [ 28.189724] serial8250: too much work for irq16 [ 28.206381] serial8250: too much work for irq16 [ 28.223053] serial8250: too much work for irq16 [ 28.239714] serial8250: too much work for irq16 [ 28.256390] serial8250: too much work for irq16 [ 28.273057] serial8250: too much work for irq16 [ 28.289730] serial8250: too much work for irq16 [ 28.306400] serial8250: too much work for irq16 [ 28.323064] serial8250: too much work for irq16 [ 28.339704] serial8250: too much work for irq16 [ 28.356382] serial8250: too much work for irq16 [ 28.373072] serial8250: too much work for irq16 [ 28.389727] serial8250: too much work for irq16 [ 28.406442] serial8250: too much work for irq16 [ 28.423123] serial8250: too much work for irq16 [ 28.439790] serial8250: too much work for irq16 [ 28.456419] serial8250: too much work for irq16 [ 28.473091] serial8250: too much work for irq16 [ 28.489730] serial8250: too much work for irq16 [ 28.506408] serial8250: too much work for irq16 [ 28.523085] serial8250: too much work for irq16 [ 28.539764] serial8250: too much work for irq16 [ 28.556436] serial8250: too much work for irq16 [ 28.573102] serial8250: too much work for irq16 [ 28.589749] serial8250: too much work for irq16 [ 28.606430] serial8250: too much work for irq16 [ 28.623099] serial8250: too much work for irq16 [ 28.639762] serial8250: too much work for irq16 [ 28.656439] serial8250: too much work for irq16 [ 28.673115] serial8250: too much work for irq16 [ 28.689767] serial8250: too much work for irq16 [ 28.706454] serial8250: too much work for irq16 [ 28.723122] serial8250: too much work for irq16 [ 28.739777] serial8250: too much work for irq16 [ 28.756452] serial8250: too much work for irq16 [ 28.773126] serial8250: too much work for irq16 [ 28.789783] serial8250: too much work for irq16 [ 28.806471] serial8250: too much work for irq16 [ 28.823134] serial8250: too much work for irq16 [ 28.839788] serial8250: too much work for irq16 [ 28.856482] serial8250: too much work for irq16 [ 28.873164] serial8250: too much work for irq16 [ 28.889832] serial8250: too much work for irq16 [ 28.906521] serial8250: too much work for irq16 [ 28.923197] serial8250: too much work for irq16 [ 28.939793] serial8250: too much work for irq16 [ 28.956469] serial8250: too much work for irq16 [ 28.973146] serial8250: too much work for irq16 [ 28.989837] serial8250: too much work for irq16 [ 29.006496] serial8250: too much work for irq16 [ 29.023165] serial8250: too much work for irq16 [ 29.039873] serial8250: too much work for irq16 [ 29.056505] serial8250: too much work for irq16 [ 29.073177] serial8250: too much work for irq16 [ 29.089820] serial8250: too much work for irq16 [ 29.106503] serial8250: too much work for irq16 [ 29.123165] serial8250: too much work for irq16 [ 29.139850] serial8250: too much work for irq16 [ 29.156511] serial8250: too much work for irq16 [ 29.173183] serial8250: too much work for irq16 [ 29.189842] serial8250: too much work for irq16 [ 29.206526] serial8250: too much work for irq16 [ 29.223197] serial8250: too much work for irq16 [ 29.239875] serial8250: too much work for irq16 [ 29.256528] serial8250: too much work for irq16 [ 29.273202] serial8250: too much work for irq16 [ 29.289854] serial8250: too much work for irq16 [ 29.306534] serial8250: too much work for irq16 [ 29.323208] serial8250: too much work for irq16 [ 29.339862] serial8250: too much work for irq16 [ 29.356538] serial8250: too much work for irq16 [ 29.373215] serial8250: too much work for irq16 [ 29.389869] serial8250: too much work for irq16 [ 29.406548] serial8250: too much work for irq16 [ 29.410040] eth0: no IPv6 routers present [ 89.260514] Marking TSC unstable due to cpufreq changes [ 89.660029] Clocksource tsc unstable (delta = -248690543 ns)