[ 20.101] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 20.101] X Protocol Version 11, Revision 0 [ 20.101] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 20.101] Current Operating System: Linux lufuhao-ubuntu 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 [ 20.101] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=dd6a65d6-fbb6-46ab-9fd5-1a1c48907d47 ro quiet splash vt.handoff=7 [ 20.101] Build Date: 20 April 2012 05:12:02AM [ 20.101] xorg-server 2:1.11.4-0ubuntu10.1 (For technical support please see http://www.ubuntu.com/support) [ 20.101] Current version of pixman: 0.24.4 [ 20.101] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 20.101] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 20.101] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 10 14:06:32 2012 [ 20.125] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 20.125] (==) No Layout section. Using the first Screen section. [ 20.125] (==) No screen section available. Using defaults. [ 20.125] (**) |-->Screen "Default Screen Section" (0) [ 20.125] (**) | |-->Monitor "" [ 20.125] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 20.125] (==) Automatically adding devices [ 20.125] (==) Automatically enabling devices [ 20.125] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 20.125] Entry deleted from font path. [ 20.125] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 20.125] Entry deleted from font path. [ 20.125] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 20.125] Entry deleted from font path. [ 20.125] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 20.125] Entry deleted from font path. [ 20.125] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 20.125] Entry deleted from font path. [ 20.125] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 20.125] Entry deleted from font path. [ 20.125] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 20.125] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 20.125] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 20.125] (II) Loader magic: 0x7f7b0a6a5b00 [ 20.125] (II) Module ABI versions: [ 20.125] X.Org ANSI C Emulation: 0.4 [ 20.125] X.Org Video Driver: 11.0 [ 20.125] X.Org XInput driver : 16.0 [ 20.125] X.Org Server Extension : 6.0 [ 20.126] (--) PCI:*(0:0:2:0) 8086:2a42:1028:02cf rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000efe8/8 [ 20.126] (--) PCI: (0:0:2:1) 8086:2a43:1028:02cf rev 7, Mem @ 0xf6b00000/1048576 [ 20.127] (II) Open ACPI successful (/var/run/acpid.socket) [ 20.127] (II) LoadModule: "extmod" [ 20.150] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 20.150] (II) Module extmod: vendor="X.Org Foundation" [ 20.151] compiled for 1.11.3, module version = 1.0.0 [ 20.151] Module class: X.Org Server Extension [ 20.151] ABI class: X.Org Server Extension, version 6.0 [ 20.151] (II) Loading extension MIT-SCREEN-SAVER [ 20.151] (II) Loading extension XFree86-VidModeExtension [ 20.151] (II) Loading extension XFree86-DGA [ 20.151] (II) Loading extension DPMS [ 20.151] (II) Loading extension XVideo [ 20.151] (II) Loading extension XVideo-MotionCompensation [ 20.151] (II) Loading extension X-Resource [ 20.151] (II) LoadModule: "dbe" [ 20.151] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 20.151] (II) Module dbe: vendor="X.Org Foundation" [ 20.151] compiled for 1.11.3, module version = 1.0.0 [ 20.151] Module class: X.Org Server Extension [ 20.151] ABI class: X.Org Server Extension, version 6.0 [ 20.151] (II) Loading extension DOUBLE-BUFFER [ 20.151] (II) LoadModule: "glx" [ 20.151] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 20.152] (II) Module glx: vendor="X.Org Foundation" [ 20.152] compiled for 1.11.3, module version = 1.0.0 [ 20.152] ABI class: X.Org Server Extension, version 6.0 [ 20.152] (==) AIGLX enabled [ 20.152] (II) Loading extension GLX [ 20.152] (II) LoadModule: "record" [ 20.152] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 20.152] (II) Module record: vendor="X.Org Foundation" [ 20.152] compiled for 1.11.3, module version = 1.13.0 [ 20.152] Module class: X.Org Server Extension [ 20.152] ABI class: X.Org Server Extension, version 6.0 [ 20.152] (II) Loading extension RECORD [ 20.152] (II) LoadModule: "dri" [ 20.152] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 20.153] (II) Module dri: vendor="X.Org Foundation" [ 20.153] compiled for 1.11.3, module version = 1.0.0 [ 20.153] ABI class: X.Org Server Extension, version 6.0 [ 20.153] (II) Loading extension XFree86-DRI [ 20.153] (II) LoadModule: "dri2" [ 20.153] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 20.153] (II) Module dri2: vendor="X.Org Foundation" [ 20.153] compiled for 1.11.3, module version = 1.2.0 [ 20.153] ABI class: X.Org Server Extension, version 6.0 [ 20.153] (II) Loading extension DRI2 [ 20.153] (==) Matched intel as autoconfigured driver 0 [ 20.153] (==) Matched vesa as autoconfigured driver 1 [ 20.153] (==) Matched fbdev as autoconfigured driver 2 [ 20.153] (==) Assigned the driver to the xf86ConfigLayout [ 20.153] (II) LoadModule: "intel" [ 20.153] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.154] (II) Module intel: vendor="X.Org Foundation" [ 20.154] compiled for 1.11.3, module version = 2.17.0 [ 20.154] Module class: X.Org Video Driver [ 20.154] ABI class: X.Org Video Driver, version 11.0 [ 20.154] (II) LoadModule: "vesa" [ 20.154] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 20.154] (II) Module vesa: vendor="X.Org Foundation" [ 20.154] compiled for 1.11.3, module version = 2.3.0 [ 20.154] Module class: X.Org Video Driver [ 20.154] ABI class: X.Org Video Driver, version 11.0 [ 20.154] (II) LoadModule: "fbdev" [ 20.154] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 20.154] (II) Module fbdev: vendor="X.Org Foundation" [ 20.154] compiled for 1.11.3, module version = 0.4.2 [ 20.154] ABI class: X.Org Video Driver, version 11.0 [ 20.154] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 20.155] (II) VESA: driver for VESA chipsets: vesa [ 20.155] (II) FBDEV: driver for framebuffer: fbdev [ 20.155] (++) using VT number 7 [ 20.157] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.157] (WW) Falling back to old probe method for vesa [ 20.157] (WW) Falling back to old probe method for fbdev [ 20.157] (II) Loading sub module "fbdevhw" [ 20.157] (II) LoadModule: "fbdevhw" [ 20.157] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 20.157] (II) Module fbdevhw: vendor="X.Org Foundation" [ 20.157] compiled for 1.11.3, module version = 0.0.2 [ 20.157] ABI class: X.Org Video Driver, version 11.0 [ 20.158] drmOpenDevice: node name is /dev/dri/card0 [ 20.158] drmOpenDevice: open result is 9, (OK) [ 20.158] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 20.158] drmOpenDevice: node name is /dev/dri/card0 [ 20.158] drmOpenDevice: open result is 9, (OK) [ 20.158] drmOpenByBusid: drmOpenMinor returns 9 [ 20.158] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 20.158] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.158] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.158] (==) intel(0): RGB weight 888 [ 20.158] (==) intel(0): Default visual is TrueColor [ 20.158] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45 [ 20.158] (--) intel(0): Chipset: "GM45" [ 20.158] (**) intel(0): Relaxed fencing enabled [ 20.158] (**) intel(0): Wait on SwapBuffers? enabled [ 20.158] (**) intel(0): Triple buffering? enabled [ 20.158] (**) intel(0): Framebuffer tiled [ 20.158] (**) intel(0): Pixmaps tiled [ 20.158] (**) intel(0): 3D buffers tiled [ 20.158] (**) intel(0): SwapBuffers wait enabled [ 20.158] (==) intel(0): video overlay key set to 0x101fe [ 20.158] (II) intel(0): Output LVDS1 has no monitor section [ 20.161] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 20.242] (II) intel(0): Output VGA1 has no monitor section [ 20.288] (II) intel(0): Output DP1 has no monitor section [ 20.288] (II) intel(0): EDID for output LVDS1 [ 20.288] (II) intel(0): Manufacturer: AUO Model: 103c Serial#: 0 [ 20.288] (II) intel(0): Year: 2009 Week: 1 [ 20.288] (II) intel(0): EDID Version: 1.3 [ 20.288] (II) intel(0): Digital Display Input [ 20.288] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 20.288] (II) intel(0): Gamma: 2.20 [ 20.288] (II) intel(0): No DPMS capabilities specified [ 20.288] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 20.288] (II) intel(0): First detailed timing is preferred mode [ 20.288] (II) intel(0): redX: 0.610 redY: 0.355 greenX: 0.333 greenY: 0.610 [ 20.288] (II) intel(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 20.288] (II) intel(0): Manufacturer's mask: 0 [ 20.288] (II) intel(0): Supported detailed timing: [ 20.288] (II) intel(0): clock: 73.0 MHz Image Size: 309 x 173 mm [ 20.288] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1506 h_border: 0 [ 20.288] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0 [ 20.288] (II) intel(0): Supported detailed timing: [ 20.288] (II) intel(0): clock: 73.0 MHz Image Size: 309 x 173 mm [ 20.288] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1506 h_border: 0 [ 20.288] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0 [ 20.288] (II) intel(0): C591J�B140XW1 [ 20.288] (II) intel(0): Unknown vendor-specific block 0 [ 20.288] (II) intel(0): EDID (in hex): [ 20.288] (II) intel(0): 00ffffffffffff0006af3c1000000000 [ 20.288] (II) intel(0): 01130103901f11780a45259c5b559c27 [ 20.288] (II) intel(0): 19505400000001010101010101010101 [ 20.288] (II) intel(0): 010101010101841c568c500023303020 [ 20.288] (II) intel(0): 360035ad1000001a841c568c50002330 [ 20.288] (II) intel(0): 3020360035ad1000001a000000fe0043 [ 20.288] (II) intel(0): 3539314a804231343058573100000000 [ 20.288] (II) intel(0): 00000000000000000001010a2020004a [ 20.288] (II) intel(0): EDID vendor "AUO", prod id 4156 [ 20.288] (II) intel(0): Printing DDC gathered Modelines: [ 20.288] (II) intel(0): Modeline "1366x768"x0.0 73.00 1366 1414 1446 1506 768 771 777 803 +hsync -vsync (48.5 kHz) [ 20.288] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 20.288] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.289] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 20.289] (II) intel(0): Printing probed modes for output LVDS1 [ 20.289] (II) intel(0): Modeline "1366x768"x60.4 73.00 1366 1414 1446 1506 768 771 777 803 +hsync -vsync (48.5 kHz) [ 20.289] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) [ 20.289] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz) [ 20.289] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.289] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.289] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.289] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.348] (II) intel(0): EDID for output VGA1 [ 20.348] (II) intel(0): Manufacturer: SAM Model: 44e Serial#: 1312896823 [ 20.348] (II) intel(0): Year: 2008 Week: 32 [ 20.348] (II) intel(0): EDID Version: 1.3 [ 20.348] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 20.348] (II) intel(0): Sync: Separate Composite SyncOnGreen [ 20.348] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 26 [ 20.348] (II) intel(0): Gamma: 2.20 [ 20.348] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 20.348] (II) intel(0): First detailed timing is preferred mode [ 20.348] (II) intel(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600 [ 20.348] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 20.348] (II) intel(0): Supported established timings: [ 20.348] (II) intel(0): 720x400@70Hz [ 20.348] (II) intel(0): 640x480@60Hz [ 20.348] (II) intel(0): 640x480@67Hz [ 20.348] (II) intel(0): 640x480@72Hz [ 20.348] (II) intel(0): 640x480@75Hz [ 20.348] (II) intel(0): 800x600@56Hz [ 20.348] (II) intel(0): 800x600@60Hz [ 20.348] (II) intel(0): 800x600@72Hz [ 20.348] (II) intel(0): 800x600@75Hz [ 20.348] (II) intel(0): 832x624@75Hz [ 20.348] (II) intel(0): 1024x768@60Hz [ 20.348] (II) intel(0): 1024x768@70Hz [ 20.348] (II) intel(0): 1024x768@75Hz [ 20.348] (II) intel(0): 1280x1024@75Hz [ 20.348] (II) intel(0): 1152x864@75Hz [ 20.348] (II) intel(0): Manufacturer's mask: 0 [ 20.348] (II) intel(0): Supported standard timings: [ 20.348] (II) intel(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 20.348] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 20.348] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 20.348] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 20.348] (II) intel(0): Supported detailed timing: [ 20.348] (II) intel(0): clock: 106.5 MHz Image Size: 408 x 255 mm [ 20.348] (II) intel(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 [ 20.348] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 [ 20.348] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz [ 20.348] (II) intel(0): Monitor name: SyncMaster [ 20.349] (II) intel(0): Serial No: HVCQ812398 [ 20.349] (II) intel(0): EDID (in hex): [ 20.349] (II) intel(0): 00ffffffffffff004c2d4e043737414e [ 20.349] (II) intel(0): 201201030e291a782ade95a3544c9926 [ 20.349] (II) intel(0): 0f5054bfef80950f81808140714f0101 [ 20.349] (II) intel(0): 0101010101019a29a0d0518422305098 [ 20.349] (II) intel(0): 360098ff1000001c000000fd00384b1e [ 20.349] (II) intel(0): 510e000a202020202020000000fc0053 [ 20.349] (II) intel(0): 796e634d61737465720a2020000000ff [ 20.349] (II) intel(0): 00485643513831323339380a20200086 [ 20.349] (II) intel(0): Printing probed modes for output VGA1 [ 20.349] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [ 20.349] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 20.349] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 20.349] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz) [ 20.349] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 20.349] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 20.349] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 20.349] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 20.349] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.349] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 20.349] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 20.349] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 20.349] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.349] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.349] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 20.349] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 20.349] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 20.349] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.349] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 20.396] (II) intel(0): EDID for output DP1 [ 20.396] (II) intel(0): Output LVDS1 connected [ 20.396] (II) intel(0): Output VGA1 connected [ 20.396] (II) intel(0): Output DP1 disconnected [ 20.396] (II) intel(0): Using fuzzy aspect match for initial modes [ 20.396] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 20.396] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 20.396] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 20.396] (II) intel(0): Kernel page flipping support detected, enabling [ 20.396] (**) intel(0): Display dimensions: (310, 170) mm [ 20.396] (**) intel(0): DPI set to (83, 114) [ 20.396] (II) Loading sub module "fb" [ 20.396] (II) LoadModule: "fb" [ 20.396] (II) Loading /usr/lib/xorg/modules/libfb.so [ 20.396] (II) Module fb: vendor="X.Org Foundation" [ 20.396] compiled for 1.11.3, module version = 1.0.0 [ 20.396] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.396] (II) Loading sub module "dri2" [ 20.396] (II) LoadModule: "dri2" [ 20.397] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 20.397] (II) Module dri2: vendor="X.Org Foundation" [ 20.397] compiled for 1.11.3, module version = 1.2.0 [ 20.397] ABI class: X.Org Server Extension, version 6.0 [ 20.397] (II) UnloadModule: "vesa" [ 20.397] (II) Unloading vesa [ 20.397] (II) UnloadModule: "fbdev" [ 20.397] (II) Unloading fbdev [ 20.397] (II) UnloadModule: "fbdevhw" [ 20.397] (II) Unloading fbdevhw [ 20.397] (==) Depth 24 pixmap format is 32 bpp [ 20.397] (II) intel(0): [DRI2] Setup complete [ 20.397] (II) intel(0): [DRI2] DRI driver: i965 [ 20.397] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 20.410] (II) UXA(0): Driver registered support for the following operations: [ 20.410] (II) solid [ 20.410] (II) copy [ 20.410] (II) composite (RENDER acceleration) [ 20.410] (II) put_image [ 20.410] (II) get_image [ 20.410] (==) intel(0): Backing store disabled [ 20.410] (==) intel(0): Silken mouse enabled [ 20.410] (II) intel(0): Initializing HW Cursor [ 21.364] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 21.371] (==) intel(0): DPMS enabled [ 21.371] (==) intel(0): Intel XvMC decoder enabled [ 21.371] (II) intel(0): Set up textured video [ 21.371] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 21.371] (II) intel(0): direct rendering: DRI2 Enabled [ 21.371] (==) intel(0): hotplug detection: "enabled" [ 21.371] (--) RandR disabled [ 21.371] (II) Initializing built-in extension Generic Event Extension [ 21.371] (II) Initializing built-in extension SHAPE [ 21.371] (II) Initializing built-in extension MIT-SHM [ 21.371] (II) Initializing built-in extension XInputExtension [ 21.371] (II) Initializing built-in extension XTEST [ 21.371] (II) Initializing built-in extension BIG-REQUESTS [ 21.371] (II) Initializing built-in extension SYNC [ 21.371] (II) Initializing built-in extension XKEYBOARD [ 21.371] (II) Initializing built-in extension XC-MISC [ 21.371] (II) Initializing built-in extension SECURITY [ 21.371] (II) Initializing built-in extension XINERAMA [ 21.371] (II) Initializing built-in extension XFIXES [ 21.371] (II) Initializing built-in extension RENDER [ 21.371] (II) Initializing built-in extension RANDR [ 21.371] (II) Initializing built-in extension COMPOSITE [ 21.371] (II) Initializing built-in extension DAMAGE [ 21.381] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 21.381] (II) AIGLX: enabled GLX_INTEL_swap_event [ 21.381] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 21.381] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 21.381] (II) AIGLX: Loaded and initialized i965 [ 21.381] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 21.381] (II) intel(0): Setting screen physical size to 270 x 203 [ 21.390] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 21.393] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 21.394] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 21.394] (II) LoadModule: "evdev" [ 21.394] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.394] (II) Module evdev: vendor="X.Org Foundation" [ 21.394] compiled for 1.11.3, module version = 2.7.0 [ 21.394] Module class: X.Org XInput Driver [ 21.394] ABI class: X.Org XInput driver, version 16.0 [ 21.394] (II) Using input driver 'evdev' for 'Video Bus' [ 21.394] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.394] (**) Video Bus: always reports core events [ 21.394] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 21.394] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 21.394] (--) evdev: Video Bus: Found keys [ 21.394] (II) evdev: Video Bus: Configuring as keyboard [ 21.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input8/event8" [ 21.394] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 21.394] (**) Option "xkb_rules" "evdev" [ 21.394] (**) Option "xkb_model" "pc105" [ 21.394] (**) Option "xkb_layout" "us" [ 21.395] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 21.395] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 21.395] (II) Using input driver 'evdev' for 'Power Button' [ 21.395] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.395] (**) Power Button: always reports core events [ 21.395] (**) evdev: Power Button: Device: "/dev/input/event1" [ 21.395] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 21.395] (--) evdev: Power Button: Found keys [ 21.395] (II) evdev: Power Button: Configuring as keyboard [ 21.395] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 21.395] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 21.395] (**) Option "xkb_rules" "evdev" [ 21.395] (**) Option "xkb_model" "pc105" [ 21.395] (**) Option "xkb_layout" "us" [ 21.396] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 21.396] (II) No input driver specified, ignoring this device. [ 21.396] (II) This device may have been added with another device file. [ 21.396] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 21.396] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 21.396] (II) Using input driver 'evdev' for 'Sleep Button' [ 21.396] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.396] (**) Sleep Button: always reports core events [ 21.396] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 21.396] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 21.396] (--) evdev: Sleep Button: Found keys [ 21.396] (II) evdev: Sleep Button: Configuring as keyboard [ 21.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2" [ 21.396] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 21.397] (**) Option "xkb_rules" "evdev" [ 21.397] (**) Option "xkb_model" "pc105" [ 21.397] (**) Option "xkb_layout" "us" [ 21.397] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11) [ 21.397] (II) No input driver specified, ignoring this device. [ 21.397] (II) This device may have been added with another device file. [ 21.397] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12) [ 21.397] (II) No input driver specified, ignoring this device. [ 21.397] (II) This device may have been added with another device file. [ 21.398] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4) [ 21.398] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 21.398] (II) Using input driver 'evdev' for ' USB Keyboard' [ 21.398] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.398] (**) USB Keyboard: always reports core events [ 21.398] (**) evdev: USB Keyboard: Device: "/dev/input/event4" [ 21.398] (--) evdev: USB Keyboard: Vendor 0x5af Product 0x802 [ 21.398] (--) evdev: USB Keyboard: Found keys [ 21.398] (II) evdev: USB Keyboard: Configuring as keyboard [ 21.398] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4/event4" [ 21.398] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9) [ 21.398] (**) Option "xkb_rules" "evdev" [ 21.398] (**) Option "xkb_model" "pc105" [ 21.398] (**) Option "xkb_layout" "us" [ 21.399] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5) [ 21.399] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 21.399] (II) Using input driver 'evdev' for ' USB Keyboard' [ 21.399] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.399] (**) USB Keyboard: always reports core events [ 21.399] (**) evdev: USB Keyboard: Device: "/dev/input/event5" [ 21.399] (--) evdev: USB Keyboard: Vendor 0x5af Product 0x802 [ 21.399] (--) evdev: USB Keyboard: Found keys [ 21.399] (II) evdev: USB Keyboard: Configuring as keyboard [ 21.399] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5/event5" [ 21.399] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 10) [ 21.399] (**) Option "xkb_rules" "evdev" [ 21.399] (**) Option "xkb_model" "pc105" [ 21.399] (**) Option "xkb_layout" "us" [ 21.400] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6) [ 21.400] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 21.400] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 21.400] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.400] (**) USB Optical Mouse: always reports core events [ 21.400] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6" [ 21.400] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x7 [ 21.400] (--) evdev: USB Optical Mouse: Found 3 mouse buttons [ 21.400] (--) evdev: USB Optical Mouse: Found scroll wheel(s) [ 21.400] (--) evdev: USB Optical Mouse: Found relative axes [ 21.400] (--) evdev: USB Optical Mouse: Found x and y relative axes [ 21.400] (--) evdev: USB Optical Mouse: Found absolute axes [ 21.400] (II) evdev: USB Optical Mouse: Forcing absolute x/y axes to exist. [ 21.400] (II) evdev: USB Optical Mouse: Configuring as mouse [ 21.400] (II) evdev: USB Optical Mouse: Adding scrollwheel support [ 21.400] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 21.400] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 21.400] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input6/event6" [ 21.400] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11) [ 21.400] (II) evdev: USB Optical Mouse: initialized for relative axes. [ 21.400] (WW) evdev: USB Optical Mouse: ignoring absolute axes. [ 21.400] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 21.400] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 21.400] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 21.400] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 21.401] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0) [ 21.401] (II) No input driver specified, ignoring this device. [ 21.401] (II) This device may have been added with another device file. [ 21.401] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 21.401] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 21.401] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 21.401] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.401] (**) AT Translated Set 2 keyboard: always reports core events [ 21.401] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 21.401] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 21.401] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 21.401] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 21.401] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 21.401] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 21.401] (**) Option "xkb_rules" "evdev" [ 21.401] (**) Option "xkb_model" "pc105" [ 21.401] (**) Option "xkb_layout" "us" [ 21.402] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event10) [ 21.402] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall" [ 21.402] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall" [ 21.402] (II) LoadModule: "synaptics" [ 21.402] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 21.402] (II) Module synaptics: vendor="X.Org Foundation" [ 21.403] compiled for 1.11.3, module version = 1.5.99 [ 21.403] Module class: X.Org XInput Driver [ 21.403] ABI class: X.Org XInput driver, version 16.0 [ 21.403] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint' [ 21.403] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 21.403] (**) AlpsPS/2 ALPS GlidePoint: always reports core events [ 21.403] (**) Option "Device" "/dev/input/event10" [ 21.408] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 [ 21.408] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 [ 21.408] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127 [ 21.408] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width. [ 21.408] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle [ 21.408] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8 [ 21.408] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15 [ 21.408] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found [ 21.408] (**) AlpsPS/2 ALPS GlidePoint: always reports core events [ 21.416] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event10" [ 21.416] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13) [ 21.416] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5 [ 21.416] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75 [ 21.416] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156 [ 21.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1 [ 21.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1 [ 21.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000 [ 21.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4 [ 21.416] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found [ 21.417] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2) [ 21.417] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates" [ 21.417] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event9) [ 21.417] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall" [ 21.417] (II) Using input driver 'evdev' for 'PS/2 Mouse' [ 21.417] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.417] (**) PS/2 Mouse: always reports core events [ 21.417] (**) evdev: PS/2 Mouse: Device: "/dev/input/event9" [ 21.417] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8 [ 21.417] (--) evdev: PS/2 Mouse: Found 3 mouse buttons [ 21.417] (--) evdev: PS/2 Mouse: Found relative axes [ 21.417] (--) evdev: PS/2 Mouse: Found x and y relative axes [ 21.417] (II) evdev: PS/2 Mouse: Configuring as mouse [ 21.417] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5 [ 21.417] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 21.417] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event9" [ 21.417] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 14) [ 21.417] (II) evdev: PS/2 Mouse: initialized for relative axes. [ 21.417] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 [ 21.417] (**) PS/2 Mouse: (accel) acceleration profile 0 [ 21.417] (**) PS/2 Mouse: (accel) acceleration factor: 2.000 [ 21.417] (**) PS/2 Mouse: (accel) acceleration threshold: 4 [ 21.418] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1) [ 21.418] (II) No input driver specified, ignoring this device. [ 21.418] (II) This device may have been added with another device file. [ 21.420] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7) [ 21.420] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 21.420] (II) Using input driver 'evdev' for 'Dell WMI hotkeys' [ 21.420] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.420] (**) Dell WMI hotkeys: always reports core events [ 21.420] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7" [ 21.420] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0 [ 21.420] (--) evdev: Dell WMI hotkeys: Found keys [ 21.420] (II) evdev: Dell WMI hotkeys: Configuring as keyboard [ 21.420] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7" [ 21.420] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15) [ 21.420] (**) Option "xkb_rules" "evdev" [ 21.420] (**) Option "xkb_model" "pc105" [ 21.420] (**) Option "xkb_layout" "us" [ 22.050] (II) intel(0): EDID vendor "AUO", prod id 4156 [ 22.050] (II) intel(0): Printing DDC gathered Modelines: [ 22.050] (II) intel(0): Modeline "1366x768"x0.0 73.00 1366 1414 1446 1506 768 771 777 803 +hsync -vsync (48.5 kHz) [ 25.077] (II) intel(0): EDID vendor "AUO", prod id 4156 [ 25.077] (II) intel(0): Printing DDC gathered Modelines: [ 25.077] (II) intel(0): Modeline "1366x768"x0.0 73.00 1366 1414 1446 1506 768 771 777 803 +hsync -vsync (48.5 kHz) [ 34.533] (II) intel(0): EDID vendor "AUO", prod id 4156 [ 34.533] (II) intel(0): Printing DDC gathered Modelines: [ 34.533] (II) intel(0): Modeline "1366x768"x0.0 73.00 1366 1414 1446 1506 768 771 777 803 +hsync -vsync (48.5 kHz) [ 34.811] (II) intel(0): Allocated new frame buffer 2816x900 stride 11264, tiled [ 36.052] (II) intel(0): EDID vendor "AUO", prod id 4156 [ 36.052] (II) intel(0): Printing DDC gathered Modelines: [ 36.052] (II) intel(0): Modeline "1366x768"x0.0 73.00 1366 1414 1446 1506 768 771 777 803 +hsync -vsync (48.5 kHz) [ 36.251] (II) intel(0): EDID vendor "AUO", prod id 4156 [ 36.251] (II) intel(0): Printing DDC gathered Modelines: [ 36.251] (II) intel(0): Modeline "1366x768"x0.0 73.00 1366 1414 1446 1506 768 771 777 803 +hsync -vsync (48.5 kHz) [ 40.864] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm