[ 0.000000] Linux version 2.6.22-9-generic (buildd@palmer) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:50:37 GMT 2007 (Ubuntu 2.6.22-9.25-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffda000 (usable) [ 0.000000] BIOS-e820: 000000003ffda000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262106) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262106 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262106 [ 0.000000] On node 0 totalpages: 262106 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32475 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FC9B0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 3FFDA7D3, 0040 (r1 DELL CPi R 27D50913 ASL 61) [ 0.000000] ACPI: FACP 3FFDB400, 0074 (r1 DELL CPi R 27D50913 ASL 61) [ 0.000000] ACPI: DSDT 3FFDC000, 2A1A (r1 INT430 SYSFexxx 1001 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFEA800, 0040 [ 0.000000] ACPI: APIC 3FFDBC00, 0068 (r1 DELL CPi R 27D50913 ASL 47) [ 0.000000] ACPI: MCFG 3FFDBBC0, 003E (r16 DELL CPi R 27D50913 ASL 61) [ 0.000000] ACPI: BOOT 3FFDB7C0, 0028 (r1 DELL CPi R 27D50913 ASL 61) [ 0.000000] ACPI: SSDT 3FFDABE6, 023E (r1 PmRef Cpu0Ist 3000 INTL 20030522) [ 0.000000] ACPI: SSDT 3FFDAA0E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522) [ 0.000000] ACPI: SSDT 3FFDA813, 01FB (r1 PmRef CpuPm 3000 INTL 20030522) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 260059 [ 0.000000] Kernel command line: root=UUID=54a62001-3dab-44a5-9e35-94ce43ade883 ro quiet splash locale=fr_FR [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.226 MHz processor. [ 7.688890] Console: colour VGA+ 80x25 [ 7.689210] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 7.689622] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 7.718621] Memory: 1028060k/1048424k available (2010k kernel code, 19628k reserved, 917k data, 364k init, 130920k highmem) [ 7.718631] virtual kernel memory layout: [ 7.718632] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 7.718633] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 7.718634] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 7.718636] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 7.718637] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 7.718638] .data : 0xc02f6806 - 0xc03dbe64 ( 917 kB) [ 7.718639] .text : 0xc0100000 - 0xc02f6806 (2010 kB) [ 7.718643] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.718678] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 7.798678] Calibrating delay using timer specific routine.. 3461.88 BogoMIPS (lpj=6923777) [ 7.798701] Security Framework v1.0.0 initialized [ 7.798708] SELinux: Disabled at boot. [ 7.798722] Mount-cache hash table entries: 512 [ 7.798840] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 7.798852] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.798855] CPU: L2 cache: 2048K [ 7.798858] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 [ 7.798867] Compat vDSO mapped to ffffe000. [ 7.798877] Checking 'hlt' instruction... OK. [ 7.814766] SMP alternatives: switching to UP code [ 7.814926] Freeing SMP alternatives: 11k freed [ 7.815167] Early unpacking initramfs... done [ 8.139306] ACPI: Core revision 20070126 [ 8.139360] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.141989] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 8.142012] Total of 1 processors activated (3461.88 BogoMIPS). [ 8.142201] ENABLING IO-APIC IRQs [ 8.142393] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 8.290578] Brought up 1 CPUs [ 8.290681] Booting paravirtualized kernel on bare hardware [ 8.290747] Time: 20:08:43 Date: 07/06/107 [ 8.290767] NET: Registered protocol family 16 [ 8.290839] EISA bus registered [ 8.290854] ACPI: bus type pci registered [ 8.328346] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10 [ 8.328349] PCI: Using configuration type 1 [ 8.328351] Setting up standard PCI resources [ 8.332674] ACPI: EC: Look up EC in DSDT [ 8.336902] ACPI: Interpreter enabled [ 8.336906] ACPI: (supports S0 S3 S4 S5) [ 8.336920] ACPI: Using IOAPIC for interrupt routing [ 8.347691] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 8.347705] PCI: Probing PCI hardware (bus 00) [ 8.348299] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 8.348304] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 8.348926] PCI: Transparent bridge - 0000:00:1e.0 [ 8.348985] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses') [ 8.348988] Please report the result to linux-kernel to fix this permanently [ 8.349016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.349434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 8.349513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 8.354874] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 8.354972] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 8.355065] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 8.355156] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 8.355236] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.355319] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.355401] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.355485] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8.355493] pnp: PnP ACPI init [ 8.355499] ACPI: bus type pnp registered [ 8.378492] pnp: PnP ACPI: found 11 devices [ 8.378494] ACPI: ACPI bus type pnp unregistered [ 8.378498] PnPBIOS: Disabled by ACPI PNP [ 8.378537] PCI: Using ACPI for IRQ routing [ 8.378540] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 8.404436] NET: Registered protocol family 8 [ 8.404438] NET: Registered protocol family 20 [ 8.404486] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 8.404489] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 8.404492] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 8.404495] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 8.404500] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 8.404503] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved [ 8.404506] pnp: 00:02: ioport range 0x1008-0x100f has been reserved [ 8.404511] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 8.404513] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 8.404516] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 8.404519] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 8.404522] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 8.404525] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 8.404531] pnp: 00:08: ioport range 0x900-0x90f has been reserved [ 8.404534] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 8.404536] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 8.404539] pnp: 00:08: ioport range 0x930-0x93f has been reserved [ 8.404542] pnp: 00:08: ioport range 0x940-0x97f has been reserved [ 8.406510] Time: tsc clocksource has been installed. [ 8.434795] PCI: Bridge: 0000:00:01.0 [ 8.434798] IO window: d000-dfff [ 8.434801] MEM window: dfd00000-dfefffff [ 8.434805] PREFETCH window: d0000000-d7ffffff [ 8.434814] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 8.434816] IO window: 00002000-000020ff [ 8.434820] IO window: 00002400-000024ff [ 8.434826] PREFETCH window: 50000000-53ffffff [ 8.434830] MEM window: 54000000-57ffffff [ 8.434835] PCI: Bridge: 0000:00:1e.0 [ 8.434838] IO window: 2000-2fff [ 8.434844] MEM window: dfc00000-dfcfffff [ 8.434848] PREFETCH window: 50000000-53ffffff [ 8.434863] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.434868] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 8.434880] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 8.434895] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 8.434900] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 8.434915] NET: Registered protocol family 2 [ 8.474513] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 8.474572] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 8.475744] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 8.476273] TCP: Hash tables configured (established 131072 bind 65536) [ 8.476277] TCP reno registered [ 8.486641] checking if image is initramfs... it is [ 8.938355] Switched to high resolution mode on CPU 0 [ 9.117078] Freeing initrd memory: 6767k freed [ 9.117222] Simple Boot Flag at 0x79 set to 0x1 [ 9.117451] audit: initializing netlink socket (disabled) [ 9.117465] audit(1186430923.084:1): initialized [ 9.117537] highmem bounce pool size: 64 pages [ 9.119274] VFS: Disk quotas dquot_6.5.1 [ 9.119319] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 9.119408] io scheduler noop registered [ 9.119410] io scheduler anticipatory registered [ 9.119412] io scheduler deadline registered [ 9.119426] io scheduler cfq registered (default) [ 9.119520] Boot video device is 0000:01:00.0 [ 9.119594] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 9.119623] assign_interrupt_mode Found MSI capability [ 9.119649] Allocate Port Service[0000:00:01.0:pcie00] [ 9.119806] isapnp: Scanning for PnP cards... [ 9.473763] isapnp: No Plug & Play device found [ 9.496741] Real Time Clock Driver v1.12ac [ 9.496851] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 9.497419] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 9.497428] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 9.497920] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 9.498102] input: Macintosh mouse button emulation as /class/input/input0 [ 9.498204] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 9.503255] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.503260] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 9.503397] mice: PS/2 mouse device common for all mice [ 9.503496] EISA: Probing bus 0 at eisa.0 [ 9.503505] Cannot allocate resource for EISA slot 1 [ 9.503508] Cannot allocate resource for EISA slot 2 [ 9.503531] EISA: Detected 0 cards. [ 9.503624] TCP cubic registered [ 9.503638] NET: Registered protocol family 1 [ 9.503661] Using IPI No-Shortcut mode [ 9.503832] Magic number: 3:648:143 [ 9.503949] hash matches device device:14 [ 9.504136] Freeing unused kernel memory: 364k freed [ 9.574150] input: AT Translated Set 2 keyboard as /class/input/input1 [ 10.681299] Capability LSM initialized [ 10.690492] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 10.690498] ACPI: Processor [CPU0] (supports 8 throttling states) [ 10.690509] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] [ 10.693676] ACPI: Thermal Zone [THM] (56 C) [ 11.062982] usbcore: registered new interface driver usbfs [ 11.063004] usbcore: registered new interface driver hub [ 11.063026] usbcore: registered new device driver usb [ 11.063747] USB Universal Host Controller Interface driver v3.0 [ 11.063806] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.063818] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 11.063822] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.063998] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 11.064029] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 11.064137] usb usb1: configuration #1 chosen from 1 choice [ 11.064158] hub 1-0:1.0: USB hub found [ 11.064164] hub 1-0:1.0: 2 ports detected [ 11.165670] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 11.165683] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 11.165687] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.165708] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 11.165739] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60 [ 11.165827] usb usb2: configuration #1 chosen from 1 choice [ 11.165850] hub 2-0:1.0: USB hub found [ 11.165856] hub 2-0:1.0: 2 ports detected [ 11.213809] SCSI subsystem initialized [ 11.218888] libata version 2.21 loaded. [ 11.269665] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 11.269678] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 11.269683] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.269705] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 11.269737] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40 [ 11.269833] usb usb3: configuration #1 chosen from 1 choice [ 11.269856] hub 3-0:1.0: USB hub found [ 11.269862] hub 3-0:1.0: 2 ports detected [ 11.373579] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 11.373593] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 11.373597] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 11.373623] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 11.373657] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20 [ 11.373748] usb usb4: configuration #1 chosen from 1 choice [ 11.373771] hub 4-0:1.0: USB hub found [ 11.373777] hub 4-0:1.0: 2 ports detected [ 3.572000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.576000] Time: acpi_pm clocksource has been installed. [ 3.612000] Clocksource tsc unstable (delta = -140773005 ns) [ 3.656000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.656000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.656000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.656000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.656000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.656000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.656000] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800 [ 3.660000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.660000] usb usb5: configuration #1 chosen from 1 choice [ 3.660000] hub 5-0:1.0: USB hub found [ 3.660000] hub 5-0:1.0: 8 ports detected [ 3.688000] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 3.764000] b44.c:v1.01 (Jun 16, 2006) [ 3.764000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 3.764000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:d8:74:62 [ 3.764000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19 [ 3.820000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.824000] ata_piix 0000:00:1f.2: version 2.11 [ 3.824000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.980000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 3.980000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.980000] scsi0 : ata_piix [ 3.980000] scsi1 : ata_piix [ 3.980000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 3.980000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 4.144000] ata1.00: ATA-6: TOSHIBA MK8026GAX, PA002D, max UDMA/100 [ 4.144000] ata1.00: 156301488 sectors, multi 8: LBA [ 4.144000] ata1.00: applying bridge limits [ 4.152000] ata1.00: configured for UDMA/100 [ 4.472000] ata2.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 102C, max UDMA/33 [ 4.576000] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 4.644000] ata2.00: configured for UDMA/33 [ 4.644000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5 [ 4.644000] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-5540A 102C PQ: 0 ANSI: 5 [ 4.664000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.664000] sd 0:0:0:0: [sda] Write Protect is off [ 4.664000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.664000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.664000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 4.664000] sd 0:0:0:0: [sda] Write Protect is off [ 4.664000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.664000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.664000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 4.768000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.772000] usb 2-1: configuration #1 chosen from 1 choice [ 4.772000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.772000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.016000] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 5.096000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc0001acc6ce1] [ 5.192000] usb 3-1: configuration #1 chosen from 1 choice [ 5.216000] usbcore: registered new interface driver hiddev [ 5.232000] input: Kensington Kensington USB Mouse as /class/input/input2 [ 5.232000] input: USB HID v1.10 Mouse [Kensington Kensington USB Mouse] on usb-0000:00:1d.2-1 [ 5.232000] usbcore: registered new interface driver usbhid [ 5.232000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 5.256000] Attempting manual resume [ 5.256000] swsusp: Resume From Partition 8:6 [ 5.256000] PM: Checking swsusp image. [ 5.256000] PM: Resume from disk failed. [ 5.280000] kjournald starting. Commit interval 5 seconds [ 5.280000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.444000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.444000] Uniform CD-ROM driver Revision: 3.20 [ 5.444000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 19.196000] Linux agpgart interface v0.102 (c) Dave Jones [ 19.312000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.360000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.564000] sdhci: Secure Digital Host Controller Interface driver [ 19.564000] sdhci: Copyright(c) Pierre Ossman [ 19.564000] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17) [ 19.564000] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18 [ 19.564000] mmc0: SDHCI at 0xdfcfc700 irq 18 DMA [ 19.596000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0189] [ 19.724000] Yenta: ISA IRQ mask 0x04b8, PCI irq 17 [ 19.724000] Socket status: 30000006 [ 19.724000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 19.724000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 19.724000] cs: IO port probe 0x2000-0x2fff: clean. [ 19.724000] pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff [ 19.724000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 20.216000] ieee80211_crypt: registered algorithm 'NULL' [ 20.236000] intel_rng: FWH not detected [ 20.260000] Bluetooth: Core ver 2.11 [ 20.260000] NET: Registered protocol family 31 [ 20.260000] Bluetooth: HCI device and connection manager initialized [ 20.260000] Bluetooth: HCI socket layer initialized [ 20.292000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 20.292000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 20.544000] Bluetooth: HCI USB driver ver 2.9 [ 20.552000] iTCO_vendor_support: vendor-support=0 [ 20.552000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 20.552000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 20.552000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 20.576000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 20.576000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 20.576000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 20.576000] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection [ 20.636000] usbcore: registered new interface driver hci_usb [ 20.800000] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels) [ 20.868000] input: PC Speaker as /class/input/input3 [ 21.104000] input: PS/2 Mouse as /class/input/input4 [ 21.124000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 [ 21.240000] cs: IO port probe 0x100-0x3af: clean. [ 21.240000] cs: IO port probe 0x3e0-0x4ff: clean. [ 21.244000] cs: IO port probe 0x820-0x8ff: clean. [ 21.244000] cs: IO port probe 0xc00-0xcf7: clean. [ 21.244000] cs: IO port probe 0xa00-0xaff: clean. [ 21.396000] NET: Registered protocol family 17 [ 21.496000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.496000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 21.676000] NET: Registered protocol family 10 [ 21.676000] lo: Disabled Privacy Extensions [ 22.324000] intel8x0_measure_ac97_clock: measured 55391 usecs [ 22.324000] intel8x0: clocking to 48000 [ 22.940000] fuse init (API version 7.8) [ 23.028000] lp: driver loaded but no devices found [ 23.092000] Adding 1076312k swap on /dev/disk/by-uuid/e3e8c23a-26e5-49c5-ada3-fc6864619c55. Priority:-1 extents:1 across:1076312k [ 23.600000] EXT3 FS on sda7, internal journal [ 31.828000] eth3: no IPv6 routers present [ 46.040000] No dock devices found. [ 46.088000] input: Lid Switch as /class/input/input6 [ 46.092000] ACPI: Lid Switch [LID] [ 46.128000] input: Power Button (CM) as /class/input/input7 [ 46.132000] ACPI: Power Button (CM) [PBTN] [ 46.168000] input: Sleep Button (CM) as /class/input/input8 [ 46.172000] ACPI: Sleep Button (CM) [SBTN] [ 46.192000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 46.504000] ACPI: Battery Slot [BAT0] (battery present) [ 46.508000] ACPI: AC Adapter [AC] (on-line) [ 53.616000] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 55.668000] [drm] Initialized drm 1.1.0 20060810 [ 55.740000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 55.740000] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 56.896000] apm: BIOS not found. [ 57.848000] [drm] Setting GART location based on new memory map [ 57.848000] [drm] Loading R300 Microcode [ 57.848000] [drm] writeback test succeeded in 1 usecs [ 59.000000] vboxdrv: Trying to deactivate NMI watchdog permanently... [ 59.000000] vboxdrv: Successfully done. [ 59.620000] Bluetooth: L2CAP ver 2.8 [ 59.620000] Bluetooth: L2CAP socket layer initialized [ 59.848000] Bluetooth: RFCOMM socket layer initialized [ 59.848000] Bluetooth: RFCOMM TTY layer initialized [ 59.848000] Bluetooth: RFCOMM ver 1.8 [ 128.956000] [drm] Setting GART location based on new memory map [ 128.956000] [drm] Loading R300 Microcode [ 128.956000] [drm] writeback test succeeded in 1 usecs