[ 0.000000] Linux version 2.6.24-11-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 22:08:31 UTC 2008 (Ubuntu 2.6.24-11.17-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077eb6400 (usable) [ 0.000000] BIOS-e820: 0000000077eb6400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 1022MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 491190) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 491190 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 491190 [ 0.000000] On node 0 totalpages: 491190 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2045 pages used for memmap [ 0.000000] HighMem zone: 259769 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBEE0 checksum 0 [ 0.000000] ACPI: RSDP 000FBEE0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 77EB7E00, 0064 (r1 DELL M08 27D7080D ASL 61) [ 0.000000] ACPI: FACP 77EB7C9C, 00F4 (r4 DELL M08 27D7080D ASL 61) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] [ 0.000000] ACPI: DSDT 77EB8400, 4E9C (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 77EC6C00, 0040 [ 0.000000] ACPI: HPET 77EB7F00, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 77EB8000, 0068 (r1 DELL M08 27D7080D ASL 47) [ 0.000000] ACPI: ASF! 77EB7C00, 006A (r32 DELL M08 27D7080D ASL 61) [ 0.000000] ACPI: MCFG 77EB7FC0, 003E (r16 DELL M08 27D7080D ASL 61) [ 0.000000] ACPI: SLIC 77EB809C, 0176 (r1 DELL M08 27D7080D ASL 61) [ 0.000000] ACPI: TCPA 77EB8300, 0032 (r1 0 ASL 0) [ 0.000000] ACPI: SSDT 77EC7000, 01C4 (r1 DELL M08 20000FE4 ASL 61) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487353 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1795.559 MHz processor. [ 46.765563] Console: colour VGA+ 80x25 [ 46.765566] console [tty0] enabled [ 46.765850] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 46.766268] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 46.848317] Memory: 1935676k/1964760k available (2164k kernel code, 27920k reserved, 1003k data, 364k init, 1047256k highmem) [ 46.848325] virtual kernel memory layout: [ 46.848326] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 46.848328] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 46.848329] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 46.848330] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 46.848331] .init : 0xc041d000 - 0xc0478000 ( 364 kB) [ 46.848333] .data : 0xc031d12d - 0xc0417dc4 (1003 kB) [ 46.848334] .text : 0xc0100000 - 0xc031d12d (2164 kB) [ 46.848337] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 46.848374] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 46.848518] hpet clockevent registered [ 46.928477] Calibrating delay using timer specific routine.. 3593.97 BogoMIPS (lpj=7187952) [ 46.928499] Security Framework initialized [ 46.928505] SELinux: Disabled at boot. [ 46.928520] AppArmor: AppArmor initialized [ 46.928524] Failure registering capabilities with primary security module. [ 46.928532] Mount-cache hash table entries: 512 [ 46.928648] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 46.928657] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 46.928660] CPU: L2 Cache: 256K (64 bytes/line) [ 46.928663] CPU 0(2) -> Core 0 [ 46.928665] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 46.928675] Compat vDSO mapped to ffffe000. [ 46.928685] Checking 'hlt' instruction... OK. [ 46.944753] SMP alternatives: switching to UP code [ 46.945979] Early unpacking initramfs... done [ 47.312776] ACPI: Core revision 20070126 [ 47.312835] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 47.318812] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 47.318830] SMP alternatives: switching to SMP code [ 47.319310] Booting processor 1/1 eip 3000 [ 47.329457] Initializing CPU#1 [ 47.408374] Calibrating delay using timer specific routine.. 3591.03 BogoMIPS (lpj=7182063) [ 47.408381] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 47.408388] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 47.408391] CPU: L2 Cache: 256K (64 bytes/line) [ 47.408393] CPU 1(2) -> Core 1 [ 47.408395] AMD C1E detected late. Force timer broadcast. [ 47.408396] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 47.408360] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 47.408378] Total of 2 processors activated (7185.00 BogoMIPS). [ 47.408529] ENABLING IO-APIC IRQs [ 47.408708] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 47.448531] Brought up 2 CPUs [ 47.448561] CPU0 attaching sched-domain: [ 47.448564] domain 0: span 03 [ 47.448566] groups: 01 02 [ 47.448569] CPU1 attaching sched-domain: [ 47.448571] domain 0: span 03 [ 47.448572] groups: 02 01 [ 47.448787] net_namespace: 64 bytes [ 47.448795] Booting paravirtualized kernel on bare hardware [ 47.449269] Time: 9:35:26 Date: 03/08/08 [ 47.449319] NET: Registered protocol family 16 [ 47.449502] EISA bus registered [ 47.449507] ACPI: bus type pci registered [ 47.506365] PCI: PCI BIOS revision 2.10 entry at 0xfacb6, last bus=11 [ 47.506367] PCI: Using configuration type 1 [ 47.506369] Setting up standard PCI resources [ 47.513414] ACPI: EC: Look up EC in DSDT [ 47.525636] ACPI: SSDT 77EC6C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 47.525781] ACPI: Interpreter enabled [ 47.525784] ACPI: (supports S0 S3 S4 S5) [ 47.525798] ACPI: Using IOAPIC for interrupt routing [ 47.570690] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 47.570886] pci 0000:00:12.0: set SATA to AHCI mode [ 47.572110] PCI: Transparent bridge - 0000:00:14.4 [ 47.572182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 47.572439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 47.572590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 47.572695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 47.572808] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 47.589157] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *0, disabled. [ 47.589247] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *0, disabled. [ 47.589335] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 47.589418] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 47.589506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 47.589595] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 47.589684] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 47.589772] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 47.589910] Linux Plug and Play Support v0.97 (c) Adam Belay [ 47.589941] pnp: PnP ACPI init [ 47.589950] ACPI: bus type pnp registered [ 47.654893] pnpacpi: exceeded the max number of mem resources: 12 [ 47.655063] pnp: PnP ACPI: found 14 devices [ 47.655065] ACPI: ACPI bus type pnp unregistered [ 47.655069] PnPBIOS: Disabled by ACPI PNP [ 47.655273] PCI: Using ACPI for IRQ routing [ 47.655276] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 47.655295] PCI: Cannot allocate resource region 5 of device 0000:00:12.0 [ 47.704292] NET: Registered protocol family 8 [ 47.704294] NET: Registered protocol family 20 [ 47.704336] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 47.704340] hpet0: 4 32-bit timers, 14318180 Hz [ 47.705383] AppArmor: AppArmor Filesystem Enabled [ 47.708281] Time: hpet clocksource has been installed. [ 47.708285] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 47.708288] Could not switch to high resolution mode on CPU 0 [ 47.712446] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 47.712453] Could not switch to high resolution mode on CPU 1 [ 47.716314] system 00:05: ioport range 0xc80-0xcaf has been reserved [ 47.716318] system 00:05: ioport range 0xcc0-0xcff could not be reserved [ 47.716327] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 47.716334] system 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 47.716337] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved [ 47.716344] system 00:0b: ioport range 0x900-0x97f has been reserved [ 47.716346] system 00:0b: ioport range 0x980-0x9ff has been reserved [ 47.716349] system 00:0b: ioport range 0xa00-0xa7f has been reserved [ 47.716352] system 00:0b: ioport range 0xa80-0xaff has been reserved [ 47.716355] system 00:0b: ioport range 0xcb0-0xcff could not be reserved [ 47.716358] system 00:0b: ioport range 0xd00-0xd7f has been reserved [ 47.716361] system 00:0b: ioport range 0xd80-0xdff has been reserved [ 47.716364] system 00:0b: ioport range 0xe00-0xe7f has been reserved [ 47.716366] system 00:0b: ioport range 0xe80-0xeaf has been reserved [ 47.716369] system 00:0b: ioport range 0xc6c-0xc6c has been reserved [ 47.716372] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 47.716375] system 00:0b: ioport range 0x1000-0x1005 has been reserved [ 47.716378] system 00:0b: ioport range 0x1008-0x100f has been reserved [ 47.716381] system 00:0b: ioport range 0xc00-0xc01 has been reserved [ 47.716383] system 00:0b: ioport range 0xc14-0xc14 has been reserved [ 47.716386] system 00:0b: ioport range 0xc50-0xc51 has been reserved [ 47.716389] system 00:0b: ioport range 0xc52-0xc52 has been reserved [ 47.716392] system 00:0b: ioport range 0xc6f-0xc6f has been reserved [ 47.716394] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved [ 47.716397] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved [ 47.716400] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved [ 47.716403] system 00:0b: ioport range 0x40b-0x40b has been reserved [ 47.716406] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved [ 47.716412] system 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 47.716415] system 00:0c: ioport range 0x1006-0x1007 has been reserved [ 47.716418] system 00:0c: ioport range 0x100a-0x1059 could not be reserved [ 47.716421] system 00:0c: ioport range 0x1080-0x10bf has been reserved [ 47.716424] system 00:0c: ioport range 0x10c0-0x10df could not be reserved [ 47.716427] system 00:0c: ioport range 0x1010-0x102f has been reserved [ 47.716430] system 00:0c: ioport range 0x809-0x809 has been reserved [ 47.716437] system 00:0d: iomem range 0x0-0x9efff could not be reserved [ 47.716440] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved [ 47.716443] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 47.716446] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 47.716449] system 00:0d: iomem range 0x100000-0x77eb63ff could not be reserved [ 47.716452] system 00:0d: iomem range 0x77eb6400-0x77efffff could not be reserved [ 47.716455] system 00:0d: iomem range 0x77f00000-0x77ffffff could not be reserved [ 47.716458] system 00:0d: iomem range 0x77f00000-0x7fefffff could not be reserved [ 47.716462] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved [ 47.716465] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 47.716468] system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 47.716471] system 00:0d: iomem range 0xfee10000-0xfee103ff has been reserved [ 47.746876] PCI: Bridge: 0000:00:01.0 [ 47.746879] IO window: e000-efff [ 47.746882] MEM window: fe900000-feafffff [ 47.746885] PREFETCH window: e0000000-efffffff [ 47.746888] PCI: Bridge: 0000:00:05.0 [ 47.746889] IO window: disabled. [ 47.746892] MEM window: fe800000-fe8fffff [ 47.746894] PREFETCH window: disabled. [ 47.746897] PCI: Bridge: 0000:00:06.0 [ 47.746898] IO window: disabled. [ 47.746901] MEM window: fe700000-fe7fffff [ 47.746903] PREFETCH window: disabled. [ 47.746914] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 47.746916] IO window: 00001400-000014ff [ 47.746921] IO window: 00001800-000018ff [ 47.746926] PREFETCH window: 8c000000-8fffffff [ 47.746931] MEM window: 90000000-93ffffff [ 47.746936] PCI: Bridge: 0000:00:14.4 [ 47.746937] IO window: disabled. [ 47.746943] MEM window: fe600000-fe6fffff [ 47.746947] PREFETCH window: disabled. [ 47.746968] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 47.746976] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 47.746998] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 47.747007] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 23 (level, low) -> IRQ 16 [ 47.747027] NET: Registered protocol family 2 [ 47.784313] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 47.784600] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 47.785235] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 47.785545] TCP: Hash tables configured (established 131072 bind 65536) [ 47.785549] TCP reno registered [ 47.796375] checking if image is initramfs... it is [ 48.491421] Freeing initrd memory: 7597k freed [ 48.492402] audit: initializing netlink socket (disabled) [ 48.492416] audit(1204968926.648:1): initialized [ 48.492609] highmem bounce pool size: 64 pages [ 48.494526] VFS: Disk quotas dquot_6.5.1 [ 48.494601] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 48.494725] io scheduler noop registered [ 48.494727] io scheduler anticipatory registered [ 48.494729] io scheduler deadline registered [ 48.494740] io scheduler cfq registered (default) [ 48.494817] Boot video device is 0000:01:05.0 [ 48.494954] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 48.494975] assign_interrupt_mode Found MSI capability [ 48.494998] Allocate Port Service[0000:00:05.0:pcie00] [ 48.495064] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 48.495083] assign_interrupt_mode Found MSI capability [ 48.495101] Allocate Port Service[0000:00:06.0:pcie00] [ 48.495338] isapnp: Scanning for PnP cards... [ 48.851670] isapnp: No Plug & Play device found [ 48.881686] Real Time Clock Driver v1.12ac [ 48.881828] hpet_resources: 0xfed00000 is busy [ 48.881880] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 48.882032] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 48.882686] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 48.883496] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 48.883564] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 48.883665] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 48.887176] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 48.887182] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 48.895864] mice: PS/2 mouse device common for all mice [ 48.896000] EISA: Probing bus 0 at eisa.0 [ 48.896003] EISA: Cannot allocate resource for mainboard [ 48.896006] Cannot allocate resource for EISA slot 1 [ 48.896040] EISA: Detected 0 cards. [ 48.896043] cpuidle: using governor ladder [ 48.896045] cpuidle: using governor menu [ 48.896137] NET: Registered protocol family 1 [ 48.896163] Using IPI No-Shortcut mode [ 48.896197] registered taskstats version 1 [ 48.896322] Magic number: 0:563:575 [ 48.896386] hash matches device ptyb7 [ 48.896469] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 48.896471] EDD information not available. [ 48.896690] Freeing unused kernel memory: 364k freed [ 48.899622] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 50.264712] fuse init (API version 7.9) [ 50.282131] ACPI: Processor [CPU0] (supports 8 throttling states) [ 50.282678] ACPI: Processor [CPU1] (supports 8 throttling states) [ 50.287385] ACPI: Thermal Zone [THM] (60 C) [ 50.723090] SCSI subsystem initialized [ 50.737031] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 50.737044] PCI: Setting latency timer of device 0000:0b:00.0 to 64 [ 50.738723] libata version 3.00 loaded. [ 50.784623] ssb: SPROM revision 2 detected. [ 50.794846] usbcore: registered new interface driver usbfs [ 50.794868] usbcore: registered new interface driver hub [ 50.797036] usbcore: registered new device driver usb [ 50.810839] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0 [ 50.810875] ahci 0000:00:12.0: version 3.0 [ 50.810905] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18 [ 50.810927] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 50.810929] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 50.835080] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 50.846613] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 50.846620] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 51.818189] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 51.818195] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 51.818593] scsi0 : ahci [ 51.818881] scsi1 : ahci [ 51.819036] scsi2 : ahci [ 51.819182] scsi3 : ahci [ 51.819368] ata1: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000100 irq 18 [ 51.819372] ata2: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000180 irq 18 [ 51.819376] ata3: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000200 irq 18 [ 51.819380] ata4: SATA max UDMA/133 abar m1024@0x88000000 port 0x88000280 irq 18 [ 52.305883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 52.656752] ata1.00: ATA-7: TOSHIBA MK8037GSX, DL240D, max UDMA/100 [ 52.656755] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 52.657651] ata1.00: configured for UDMA/100 [ 52.977497] ata2: SATA link down (SStatus 0 SControl 300) [ 53.297321] ata3: SATA link down (SStatus 0 SControl 300) [ 53.613139] ata4: SATA link down (SStatus 0 SControl 300) [ 53.613244] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL24 PQ: 0 ANSI: 5 [ 53.613184] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 53.613206] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 53.613516] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 53.613547] ohci_hcd 0000:00:13.0: irq 19, io mem 0xffb00000 [ 53.673034] usb usb1: configuration #1 chosen from 1 choice [ 53.673059] hub 1-0:1.0: USB hub found [ 53.673071] hub 1-0:1.0: 2 ports detected [ 53.776935] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 53.776949] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 53.776970] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 53.776987] ohci_hcd 0000:00:13.1: irq 17, io mem 0xffb01000 [ 53.836900] usb usb2: configuration #1 chosen from 1 choice [ 53.836924] hub 2-0:1.0: USB hub found [ 53.836935] hub 2-0:1.0: 2 ports detected [ 53.940825] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 53.940834] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 53.940852] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 53.940866] ohci_hcd 0000:00:13.2: irq 20, io mem 0xffb02000 [ 54.000844] usb usb3: configuration #1 chosen from 1 choice [ 54.000870] hub 3-0:1.0: USB hub found [ 54.000883] hub 3-0:1.0: 2 ports detected [ 54.104758] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 54.104773] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 54.104798] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 54.104814] ohci_hcd 0000:00:13.3: irq 17, io mem 0xffb03000 [ 54.112852] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 54.164763] usb usb4: configuration #1 chosen from 1 choice [ 54.164790] hub 4-0:1.0: USB hub found [ 54.164803] hub 4-0:1.0: 2 ports detected [ 54.268680] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20 [ 54.268696] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 54.268721] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 54.268737] ohci_hcd 0000:00:13.4: irq 20, io mem 0xffb04000 [ 54.328657] usb usb5: configuration #1 chosen from 1 choice [ 54.328683] hub 5-0:1.0: USB hub found [ 54.328696] hub 5-0:1.0: 2 ports detected [ 54.347853] usb 1-2: configuration #1 chosen from 1 choice [ 54.435730] tg3.c:v3.86 (November 9, 2007) [ 54.435796] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 54.435809] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 54.451865] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:09:b1:cc:4c [ 54.451873] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 54.451876] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 54.452101] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [ 54.452114] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19 [ 54.452125] SB600_PATA: not 100% native mode: will probe irqs later [ 54.452135] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio [ 54.452148] Probing IDE interface ide0... [ 54.680531] usb 4-2: new full speed USB device using ohci_hcd and address 2 [ 54.936524] usb 4-2: configuration #1 chosen from 1 choice [ 54.939701] usbcore: registered new interface driver hiddev [ 54.944631] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input2 [ 54.968454] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:13.0-2 [ 54.968478] usbcore: registered new interface driver usbhid [ 54.968482] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 55.524226] hda: HL-DT-ST DVD+/-RW GSA-T21N, ATAPI CD/DVD-ROM drive [ 55.524262] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 55.525270] hda: UDMA/33 mode selected [ 55.525730] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 55.529185] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 23 (level, low) -> IRQ 16 [ 55.579981] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe6ff000-fe6ff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 55.583576] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 20 (level, low) -> IRQ 21 [ 55.583592] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 55.583626] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 55.583664] ehci_hcd 0000:00:13.5: debug port 1 [ 55.583677] ehci_hcd 0000:00:13.5: irq 21, io mem 0xffa80000 [ 55.595316] Driver 'sd' needs updating - please use bus_type methods [ 55.595420] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 55.595436] sd 0:0:0:0: [sda] Write Protect is off [ 55.595438] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 55.595461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 55.595514] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 55.595529] sd 0:0:0:0: [sda] Write Protect is off [ 55.595532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 55.595551] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 55.595556] sda:<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 55.596177] usb usb6: configuration #1 chosen from 1 choice [ 55.596202] hub 6-0:1.0: USB hub found [ 55.596208] hub 6-0:1.0: 10 ports detected [ 55.656465] sda1 sda2 sda3 sda4 <<6>usb 1-2: USB disconnect, address 2 [ 55.678176] sda5 sda6 sda7 > [ 55.694680] sd 0:0:0:0: [sda] Attached SCSI disk [ 55.702866] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 55.730035] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 55.730043] Uniform CD-ROM driver Revision: 3.20 [ 55.831918] usb 4-2: USB disconnect, address 2 [ 56.731220] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 56.803849] kjournald starting. Commit interval 5 seconds [ 56.803681] EXT3-fs: mounted filesystem with ordered data mode. [ 56.848314] kjournald starting. Commit interval 5 seconds [ 56.848326] EXT3-fs: mounted filesystem with ordered data mode. [ 56.867416] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc00004a16438] [ 56.958413] usb 1-2: configuration #1 chosen from 1 choice [ 56.966533] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3 [ 56.987308] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:13.0-2 [ 57.307048] usb 4-2: new full speed USB device using ohci_hcd and address 3 [ 57.561066] usb 4-2: configuration #1 chosen from 1 choice [ 58.491460] kjournald starting. Commit interval 5 seconds [ 58.491472] EXT3-fs: mounted filesystem with ordered data mode. [ 58.536221] kjournald starting. Commit interval 5 seconds [ 58.536233] EXT3-fs: mounted filesystem with ordered data mode. [ 60.179367] kjournald starting. Commit interval 5 seconds [ 60.179379] EXT3-fs: mounted filesystem with ordered data mode. [ 60.224131] kjournald starting. Commit interval 5 seconds [ 60.224143] EXT3-fs: mounted filesystem with ordered data mode. [ 61.633994] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 61.679967] ISO 9660 Extensions: RRIP_1991A [ 62.068221] Registering unionfs 1.4 [ 62.068225] unionfs: debugging is not enabled [ 62.079864] loop: module loaded [ 62.458419] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 163.381179] Linux agpgart interface v0.102 [ 163.910036] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 164.017255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 164.074909] input: PS/2 Mouse as /devices/virtual/input/input5 [ 164.113580] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 164.920487] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 165.303530] ACPI: AC Adapter [AC] (on-line) [ 165.337007] ACPI: Battery Slot [BAT0] (battery present) [ 165.337058] ACPI: Battery Slot [BAT1] (battery absent) [ 165.794139] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 165.867814] ACPI: WMI-Acer: Mapper loaded [ 165.948846] input: Lid Switch as /devices/virtual/input/input7 [ 165.953711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 165.971403] ACPI: Lid Switch [LID] [ 165.971463] input: Power Button (CM) as /devices/virtual/input/input8 [ 166.034165] ACPI: Power Button (CM) [PBTN] [ 166.034229] input: Sleep Button (CM) as /devices/virtual/input/input9 [ 166.094112] ACPI: Sleep Button (CM) [SBTN] [ 166.095108] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input10 [ 166.133458] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0206] [ 166.133489] Yenta O2: res at 0x94/0xD4: 00/ea [ 166.133491] Yenta O2: enabling read prefetch/write burst [ 166.149600] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 166.262497] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 166.262503] Socket status: 30000006 [ 166.262506] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 166.262512] pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff [ 166.761924] Bluetooth: Core ver 2.11 [ 166.773247] NET: Registered protocol family 31 [ 166.773251] Bluetooth: HCI device and connection manager initialized [ 166.773256] Bluetooth: HCI socket layer initialized [ 166.943780] Bluetooth: HCI USB driver ver 2.9 [ 166.946297] usbcore: registered new interface driver hci_usb [ 167.549083] b43-phy0: Broadcom 4311 WLAN found [ 167.628820] phy0: Selected rate control algorithm 'simple' [ 167.786892] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19 [ 168.215058] cs: IO port probe 0x100-0x3af: clean. [ 168.217044] cs: IO port probe 0x3e0-0x4ff: clean. [ 168.217842] cs: IO port probe 0x820-0x8ff: clean. [ 168.218518] cs: IO port probe 0xc00-0xcf7: excluding 0xcd8-0xcdf [ 168.219066] cs: IO port probe 0xa00-0xaff: clean. [ 169.976379] Adding 1405648k swap on /dev/sda5. Priority:-1 extents:1 across:1405648k [ 170.870585] ip_tables: (C) 2000-2006 Netfilter Core Team [ 172.746165] ACPI: ACPI Dock Station Driver [ 172.747840] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay [ 172.747846] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler [ 172.747897] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added [ 172.955595] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 173.877141] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 processors (2 cpu cores) (version 2.20.00) [ 173.877004] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 173.877009] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14 [ 173.877011] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a [ 177.350900] NET: Registered protocol family 10 [ 177.351154] lo: Disabled Privacy Extensions [ 177.676523] lp: driver loaded but no devices found [ 177.868484] ppdev: user-space parallel port driver [ 180.189551] apm: BIOS not found. [ 181.670577] Clocksource tsc unstable (delta = -102243690 ns) [ 184.312241] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 184.447401] input: b43-phy0 as /devices/virtual/input/input11 [ 184.523898] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 184.523907] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 184.524414] Bluetooth: L2CAP ver 2.9 [ 184.524417] Bluetooth: L2CAP socket layer initialized [ 184.678824] Bluetooth: RFCOMM socket layer initialized [ 184.678840] Bluetooth: RFCOMM TTY layer initialized [ 184.678842] Bluetooth: RFCOMM ver 1.8 [ 185.015465] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 185.015470] tg3: eth0: Flow control is on for TX and on for RX. [ 185.016683] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 186.509365] input: b43-phy0 as /devices/virtual/input/input12 [ 186.552063] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 186.552106] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 188.011371] NET: Registered protocol family 17 [ 188.415706] [drm] Initialized drm 1.1.0 20060810 [ 193.857134] eth0: no IPv6 routers present [ 198.242624] input: b43-phy0 as /devices/virtual/input/input13 [ 198.286514] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 198.286522] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 200.945377] hda-intel: Invalid position buffer, using LPIB read method instead. [ 206.422741] input: b43-phy0 as /devices/virtual/input/input14 [ 206.465845] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 206.465854] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 217.386004] input: b43-phy0 as /devices/virtual/input/input15 [ 217.452292] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 217.452300] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 224.013978] CPU0 attaching NULL sched-domain. [ 224.013992] CPU1 attaching NULL sched-domain. [ 224.048677] CPU0 attaching sched-domain: [ 224.048686] domain 0: span 03 [ 224.048688] groups: 01 02 [ 224.048693] CPU1 attaching sched-domain: [ 224.048696] domain 0: span 03 [ 224.048698] groups: 02 01 [ 233.956066] input: b43-phy0 as /devices/virtual/input/input16 [ 234.039035] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 234.039046] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 244.749408] input: b43-phy0 as /devices/virtual/input/input17 [ 244.783635] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 244.783644] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 252.885324] input: b43-phy0 as /devices/virtual/input/input18 [ 252.939996] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 252.940004] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 261.036498] input: b43-phy0 as /devices/virtual/input/input19 [ 261.080930] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 261.080937] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). [ 318.065465] input: b43-phy0 as /devices/virtual/input/input20 [ 318.121962] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. [ 318.121969] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).