[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-38-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #83-Ubuntu SMP Wed Jan 4 11:12:07 UTC 2012 (Ubuntu 2.6.32-38.83-generic 2.6.32.52+drm33.21) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-38-generic root=UUID=c0254506-cf47-45b3-8273-68361907cc15 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable) [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000180000000 aka 6144M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffc0000 (usable) [ 0.000000] modified: 00000000bffc0000 - 00000000bffce000 (ACPI data) [ 0.000000] modified: 00000000bffce000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] modified: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000180000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffc0000 page 4k [ 0.000000] kernel direct mapping tables up to bffc0000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000180000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0180000000 page 2M [ 0.000000] kernel direct mapping tables up to 180000000 @ 13000-1a000 [ 0.000000] RAMDISK: 377f3000 - 37fef2ef [ 0.000000] ACPI: RSDP 00000000000fb840 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 A_M_I_ OEMRSDT 03000826 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v02 A_M_I_ OEMFACP 03000826 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bffc05c0 04E38 (v01 A0557 A0557000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bffce000 00040 [ 0.000000] ACPI: APIC 00000000bffc0390 00070 (v01 A_M_I_ OEMAPIC 03000826 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bffc0400 0003C (v01 A_M_I_ OEMMCFG 03000826 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffce040 00060 (v01 A_M_I_ AMI_OEM 03000826 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bffc5400 00038 (v01 A_M_I_ OEMHPET0 03000826 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000180000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 0000000000049fff] pages 30 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0180000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a35ac4] TEXT DATA BSS ==> [0001000000 - 0001a35ac4] [ 0.000000] #3 [00377f3000 - 0037fef2ef] RAMDISK ==> [00377f3000 - 0037fef2ef] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a36000 - 0001a3628c] BRK ==> [0001a36000 - 0001a3628c] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000015000] PGTABLE ==> [0000013000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880028600000-ffff88002cbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00180000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffc0 [ 0.000000] 0: 0x00100000 -> 0x00180000 [ 0.000000] On node 0 totalpages: 1310543 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767992 pages, LIFO batch:31 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000 [ 0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000 [ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91608 r8192 d23080 u1048576 [ 0.000000] pcpu-alloc: s91608 r8192 d23080 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1288935 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-38-generic root=UUID=c0254506-cf47-45b3-8273-68361907cc15 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 5085800k/6291456k available (5436k kernel code, 1049284k absent, 156372k reserved, 2982k data, 884k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 52428800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2109.934 MHz processor. [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4219.86 BogoMIPS (lpj=21099340) [ 0.010039] Security Framework initialized [ 0.010062] AppArmor: AppArmor initialized [ 0.010935] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.022308] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.026106] Mount-cache hash table entries: 256 [ 0.026301] Initializing cgroup subsys ns [ 0.026306] Initializing cgroup subsys cpuacct [ 0.026310] Initializing cgroup subsys memory [ 0.026323] Initializing cgroup subsys devices [ 0.026325] Initializing cgroup subsys freezer [ 0.026328] Initializing cgroup subsys net_cls [ 0.026353] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.026356] CPU: L2 Cache: 512K (64 bytes/line) [ 0.026358] CPU 0/0x0 -> Node 0 [ 0.026360] tseg: 0000000000 [ 0.026377] CPU: Physical Processor ID: 0 [ 0.026378] CPU: Processor Core ID: 0 [ 0.026382] mce: CPU supports 5 MCE banks [ 0.026394] using C1E aware idle routine [ 0.026396] Performance Events: AMD PMU driver. [ 0.026401] ... version: 0 [ 0.026403] ... bit width: 48 [ 0.026405] ... generic registers: 4 [ 0.026407] ... value mask: 0000ffffffffffff [ 0.026409] ... max period: 00007fffffffffff [ 0.026411] ... fixed-purpose events: 0 [ 0.026412] ... event mask: 000000000000000f [ 0.028135] ACPI: Core revision 20090903 [ 0.036041] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036047] ftrace: allocating 22567 entries in 89 pages [ 0.040123] Setting APIC routing to flat [ 0.040589] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.060000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.060000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.060000] ..... (found apic 0 pin 0) ... [ 0.164205] ....... works. [ 0.164207] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.320084] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 0.320105] Brought up 2 CPUs [ 0.320108] Total of 2 processors activated (8439.02 BogoMIPS). [ 0.320576] CPU0 attaching sched-domain: [ 0.320581] domain 0: span 0-1 level MC [ 0.320584] groups: 0 1 [ 0.320590] CPU1 attaching sched-domain: [ 0.320591] domain 0: span 0-1 level MC [ 0.320594] groups: 1 0 [ 0.320679] devtmpfs: initialized [ 0.320679] regulator: core version 0.5 [ 0.320679] Time: 10:37:15 Date: 02/29/12 [ 0.320679] NET: Registered protocol family 16 [ 0.320679] node 0 link 0: io port [1000, ffffff] [ 0.320679] TOM: 00000000c0000000 aka 3072M [ 0.320679] node 0 link 0: mmio [e0000000, efffffff] [ 0.320679] node 0 link 0: mmio [a0000, bffff] [ 0.320679] node 0 link 0: mmio [c0000000, fe0bffff] [ 0.320679] TOM2: 0000000180000000 aka 6144M [ 0.320679] bus: [00,ff] on node 0 link 0 [ 0.320679] bus: 00 index 0 io port: [0, ffff] [ 0.320679] bus: 00 index 1 mmio: [c0000000, ffffffff] [ 0.320679] bus: 00 index 2 mmio: [a0000, bffff] [ 0.320679] bus: 00 index 3 mmio: [180000000, fcffffffff] [ 0.320679] ACPI: bus type pci registered [ 0.320679] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.320679] PCI: Not using MMCONFIG. [ 0.320679] PCI: Using configuration type 1 for base access [ 0.321078] Trying to unpack rootfs image as initramfs... [ 0.330092] bio: create slab at 0 [ 0.330920] ACPI: EC: Look up EC in DSDT [ 0.334890] ACPI: Executed 1 blocks of module-level executable AML code [ 0.340333] ACPI: Interpreter enabled [ 0.340336] ACPI: (supports S0 S1 S3 S4 S5) [ 0.340360] ACPI: Using IOAPIC for interrupt routing [ 0.340416] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.346704] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.358637] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.368594] ACPI Warning: Incorrect checksum in table [OEMB] - E4, should be D7 (20090903/tbutils-314) [ 0.368711] ACPI: No dock devices found. [ 0.368839] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.369026] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff] [ 0.369073] pci 0000:00:01.1: reg 10 io port: [0xcc00-0xcc3f] [ 0.369083] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f] [ 0.369087] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f] [ 0.369106] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.369112] pci 0000:00:01.1: PME# disabled [ 0.369165] pci 0000:00:02.0: reg 10 32bit mmio: [0xdbeff000-0xdbefffff] [ 0.369186] pci 0000:00:02.0: supports D1 D2 [ 0.369188] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.369191] pci 0000:00:02.0: PME# disabled [ 0.369216] pci 0000:00:02.1: reg 10 32bit mmio: [0xdbefec00-0xdbefecff] [ 0.369241] pci 0000:00:02.1: supports D1 D2 [ 0.369243] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.369247] pci 0000:00:02.1: PME# disabled [ 0.369315] pci 0000:00:05.0: reg 10 32bit mmio: [0xdbef8000-0xdbefbfff] [ 0.369340] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.369343] pci 0000:00:05.0: PME# disabled [ 0.369383] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.369421] pci 0000:00:07.0: reg 10 32bit mmio: [0xdbefd000-0xdbefdfff] [ 0.369425] pci 0000:00:07.0: reg 14 io port: [0xc480-0xc487] [ 0.369446] pci 0000:00:07.0: supports D1 D2 [ 0.369448] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.369452] pci 0000:00:07.0: PME# disabled [ 0.369478] pci 0000:00:08.0: reg 10 io port: [0xc400-0xc407] [ 0.369482] pci 0000:00:08.0: reg 14 io port: [0xc080-0xc083] [ 0.369486] pci 0000:00:08.0: reg 18 io port: [0xc000-0xc007] [ 0.369489] pci 0000:00:08.0: reg 1c io port: [0xbc00-0xbc03] [ 0.369493] pci 0000:00:08.0: reg 20 io port: [0xb880-0xb88f] [ 0.369497] pci 0000:00:08.0: reg 24 32bit mmio: [0xdbefc000-0xdbefcfff] [ 0.369530] pci 0000:00:08.1: reg 10 io port: [0xb800-0xb807] [ 0.369534] pci 0000:00:08.1: reg 14 io port: [0xb480-0xb483] [ 0.369538] pci 0000:00:08.1: reg 18 io port: [0xb400-0xb407] [ 0.369541] pci 0000:00:08.1: reg 1c io port: [0xb080-0xb083] [ 0.369545] pci 0000:00:08.1: reg 20 io port: [0xb000-0xb00f] [ 0.369549] pci 0000:00:08.1: reg 24 32bit mmio: [0xdbef3000-0xdbef3fff] [ 0.369601] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.369603] pci 0000:00:09.0: PME# disabled [ 0.369641] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.369644] pci 0000:00:0b.0: PME# disabled [ 0.369681] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.369684] pci 0000:00:0c.0: PME# disabled [ 0.369812] pci 0000:01:06.0: reg 10 io port: [0xdc00-0xdc1f] [ 0.369844] pci 0000:01:06.0: supports D1 D2 [ 0.369883] pci 0000:01:07.0: reg 20 io port: [0xd880-0xd89f] [ 0.369903] pci 0000:01:07.0: supports D1 D2 [ 0.369905] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot [ 0.369908] pci 0000:01:07.0: PME# disabled [ 0.369948] pci 0000:01:07.1: reg 20 io port: [0xd800-0xd81f] [ 0.369967] pci 0000:01:07.1: supports D1 D2 [ 0.369969] pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot [ 0.369973] pci 0000:01:07.1: PME# disabled [ 0.370017] pci 0000:01:07.2: reg 10 32bit mmio: [0xdbfffc00-0xdbfffcff] [ 0.370049] pci 0000:01:07.2: supports D1 D2 [ 0.370051] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot [ 0.370055] pci 0000:01:07.2: PME# disabled [ 0.370086] pci 0000:00:04.0: transparent bridge [ 0.370089] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff] [ 0.370092] pci 0000:00:04.0: bridge 32bit mmio: [0xdbf00000-0xdbffffff] [ 0.370120] pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff] [ 0.370127] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.370135] pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff] [ 0.370140] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.370145] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdefe0000-0xdeffffff] [ 0.370199] pci 0000:00:09.0: bridge io port: [0xe000-0xefff] [ 0.370202] pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff] [ 0.370206] pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.370288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.370491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.370583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.370648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.370713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.379016] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.379223] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.379430] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 [ 0.379635] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11 [ 0.379840] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.380062] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.380270] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.380477] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11 [ 0.380686] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 [ 0.380891] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.381096] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.381302] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.381516] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 0.381723] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 0.381928] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.382138] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.382352] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.382557] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5 [ 0.382802] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.382955] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.382958] vgaarb: loaded [ 0.383088] SCSI subsystem initialized [ 0.383240] libata version 3.00 loaded. [ 0.383330] usbcore: registered new interface driver usbfs [ 0.383342] usbcore: registered new interface driver hub [ 0.383371] usbcore: registered new device driver usb [ 0.383535] ACPI: WMI: Mapper loaded [ 0.383537] PCI: Using ACPI for IRQ routing [ 0.383719] NetLabel: Initializing [ 0.383721] NetLabel: domain hash size = 128 [ 0.383723] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.383739] NetLabel: unlabeled traffic allowed by default [ 0.383779] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.383786] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.383791] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.390211] Switching to clocksource hpet [ 0.392219] AppArmor: AppArmor Filesystem Enabled [ 0.392244] pnp: PnP ACPI init [ 0.392266] ACPI: bus type pnp registered [ 0.396241] pnp 00:07: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.396245] pnp 00:07: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.399650] pnp: PnP ACPI: found 15 devices [ 0.399652] ACPI: ACPI bus type pnp unregistered [ 0.399667] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.399670] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.399673] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.399676] system 00:07: ioport range 0x580-0x5ff has been reserved [ 0.399679] system 00:07: ioport range 0x800-0x87f could not be reserved [ 0.399682] system 00:07: ioport range 0x880-0x8ff has been reserved [ 0.399685] system 00:07: ioport range 0xd00-0xd7f has been reserved [ 0.399688] system 00:07: ioport range 0xd80-0xdff has been reserved [ 0.399691] system 00:07: ioport range 0x2000-0x207f has been reserved [ 0.399694] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 0.399698] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.399701] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.399704] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.399707] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved [ 0.399710] system 00:07: iomem range 0xff300000-0xff3fffff has been reserved [ 0.399716] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.399719] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.399724] system 00:0b: ioport range 0x230-0x23f has been reserved [ 0.399727] system 00:0b: ioport range 0x290-0x29f has been reserved [ 0.399730] system 00:0b: ioport range 0xa00-0xa0f has been reserved [ 0.399733] system 00:0b: ioport range 0xa10-0xa1f has been reserved [ 0.399738] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.399744] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.399747] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.399750] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.399753] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved [ 0.399756] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved [ 0.404517] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.404520] pci 0000:00:04.0: IO window: 0xd000-0xdfff [ 0.404524] pci 0000:00:04.0: MEM window: 0xdbf00000-0xdbffffff [ 0.404527] pci 0000:00:04.0: PREFETCH window: disabled [ 0.404532] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.404534] pci 0000:00:09.0: IO window: 0xe000-0xefff [ 0.404537] pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff [ 0.404541] pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.404544] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.404546] pci 0000:00:0b.0: IO window: disabled [ 0.404549] pci 0000:00:0b.0: MEM window: disabled [ 0.404551] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.404555] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.404557] pci 0000:00:0c.0: IO window: disabled [ 0.404559] pci 0000:00:0c.0: MEM window: disabled [ 0.404561] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.404571] pci 0000:00:04.0: setting latency timer to 64 [ 0.404576] pci 0000:00:09.0: setting latency timer to 64 [ 0.404581] pci 0000:00:0b.0: setting latency timer to 64 [ 0.404586] pci 0000:00:0c.0: setting latency timer to 64 [ 0.404591] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.404593] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.404596] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.404598] pci_bus 0000:01: resource 1 mem: [0xdbf00000-0xdbffffff] [ 0.404601] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.404603] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.404606] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.404609] pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff] [ 0.404611] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.404655] NET: Registered protocol family 2 [ 0.404953] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.408147] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.416308] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.417310] TCP: Hash tables configured (established 524288 bind 65536) [ 0.417313] TCP reno registered [ 0.417436] NET: Registered protocol family 1 [ 1.000085] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000134] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000192] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000250] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000306] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000368] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000435] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000504] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.000561] pci 0000:02:00.0: Boot video device [ 1.001657] PCI-DMA: Disabling AGP. [ 1.001792] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.001794] PCI-DMA: using GART IOMMU. [ 1.001799] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.002844] Scanning for low memory corruption every 60 seconds [ 1.002989] audit: initializing netlink socket (disabled) [ 1.003003] type=2000 audit(1330511836.000:1): initialized [ 1.012347] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.013789] VFS: Disk quotas dquot_6.5.2 [ 1.013849] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.014552] fuse init (API version 7.13) [ 1.014638] msgmni has been set to 9933 [ 1.014917] alg: No test for stdrng (krng) [ 1.014975] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.014978] io scheduler noop registered [ 1.014980] io scheduler anticipatory registered [ 1.014982] io scheduler deadline registered [ 1.015048] io scheduler cfq registered (default) [ 1.015229] alloc irq_desc for 24 on node 0 [ 1.015231] alloc kstat_irqs on node 0 [ 1.015241] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X [ 1.015246] pcieport 0000:00:09.0: setting latency timer to 64 [ 1.015351] alloc irq_desc for 25 on node 0 [ 1.015353] alloc kstat_irqs on node 0 [ 1.015358] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X [ 1.015362] pcieport 0000:00:0b.0: setting latency timer to 64 [ 1.015470] alloc irq_desc for 26 on node 0 [ 1.015472] alloc kstat_irqs on node 0 [ 1.015477] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X [ 1.015480] pcieport 0000:00:0c.0: setting latency timer to 64 [ 1.015543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.015567] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.015693] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.015706] ACPI: Power Button [PWRB] [ 1.015760] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.015763] ACPI: Power Button [PWRF] [ 1.016063] processor LNXCPU:00: registered as cooling_device0 [ 1.016116] processor LNXCPU:01: registered as cooling_device1 [ 1.021647] Linux agpgart interface v0.103 [ 1.021694] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.021806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.022126] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.023226] brd: module loaded [ 1.023732] loop: module loaded [ 1.023846] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.024211] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 1.024650] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.024654] alloc irq_desc for 23 on node 0 [ 1.024657] alloc kstat_irqs on node 0 [ 1.024667] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.024694] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 1.024702] pata_acpi 0000:00:08.0: PCI INT A disabled [ 1.025050] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 [ 1.025053] alloc irq_desc for 22 on node 0 [ 1.025055] alloc kstat_irqs on node 0 [ 1.025062] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 1.025090] pata_acpi 0000:00:08.1: setting latency timer to 64 [ 1.025098] pata_acpi 0000:00:08.1: PCI INT B disabled [ 1.025512] Fixed MDIO Bus: probed [ 1.025546] PPP generic driver version 2.4.2 [ 1.025608] tun: Universal TUN/TAP device driver, 1.6 [ 1.025610] tun: (C) 1999-2004 Max Krasnyansky [ 1.025706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.026063] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 1.026066] alloc irq_desc for 21 on node 0 [ 1.026068] alloc kstat_irqs on node 0 [ 1.026076] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 1.026108] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.026111] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.026151] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.026190] ehci_hcd 0000:00:02.1: debug port 1 [ 1.026198] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.026222] ehci_hcd 0000:00:02.1: irq 21, io mem 0xdbefec00 [ 1.040017] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.040116] usb usb1: configuration #1 chosen from 1 choice [ 1.040147] hub 1-0:1.0: USB hub found [ 1.040156] hub 1-0:1.0: 10 ports detected [ 1.040591] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 1.040594] alloc irq_desc for 19 on node 0 [ 1.040596] alloc kstat_irqs on node 0 [ 1.040604] ehci_hcd 0000:01:07.2: PCI INT C -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [ 1.040619] ehci_hcd 0000:01:07.2: EHCI Host Controller [ 1.040664] ehci_hcd 0000:01:07.2: new USB bus registered, assigned bus number 2 [ 1.040716] ehci_hcd 0000:01:07.2: irq 19, io mem 0xdbfffc00 [ 1.057075] Freeing initrd memory: 8176k freed [ 1.060043] ehci_hcd 0000:01:07.2: USB 2.0 started, EHCI 1.00 [ 1.060130] usb usb2: configuration #1 chosen from 1 choice [ 1.060158] hub 2-0:1.0: USB hub found [ 1.060168] hub 2-0:1.0: 4 ports detected [ 1.060247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.060663] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 1.060667] alloc irq_desc for 20 on node 0 [ 1.060669] alloc kstat_irqs on node 0 [ 1.060677] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 1.060696] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.060699] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.060747] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 1.060783] ohci_hcd 0000:00:02.0: irq 20, io mem 0xdbeff000 [ 1.122091] usb usb3: configuration #1 chosen from 1 choice [ 1.122117] hub 3-0:1.0: USB hub found [ 1.122126] hub 3-0:1.0: 10 ports detected [ 1.122241] uhci_hcd: USB Universal Host Controller Interface driver [ 1.122650] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 1.122653] alloc irq_desc for 18 on node 0 [ 1.122655] alloc kstat_irqs on node 0 [ 1.122663] uhci_hcd 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18 [ 1.122672] uhci_hcd 0000:01:07.0: UHCI Host Controller [ 1.122725] uhci_hcd 0000:01:07.0: new USB bus registered, assigned bus number 4 [ 1.122760] uhci_hcd 0000:01:07.0: irq 18, io base 0x0000d880 [ 1.122873] usb usb4: configuration #1 chosen from 1 choice [ 1.122898] hub 4-0:1.0: USB hub found [ 1.122908] hub 4-0:1.0: 2 ports detected [ 1.123317] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 [ 1.123320] alloc irq_desc for 17 on node 0 [ 1.123322] alloc kstat_irqs on node 0 [ 1.123330] uhci_hcd 0000:01:07.1: PCI INT B -> Link[LNKC] -> GSI 17 (level, low) -> IRQ 17 [ 1.123336] uhci_hcd 0000:01:07.1: UHCI Host Controller [ 1.123376] uhci_hcd 0000:01:07.1: new USB bus registered, assigned bus number 5 [ 1.123414] uhci_hcd 0000:01:07.1: irq 17, io base 0x0000d800 [ 1.123510] usb usb5: configuration #1 chosen from 1 choice [ 1.123540] hub 5-0:1.0: USB hub found [ 1.123548] hub 5-0:1.0: 2 ports detected [ 1.123645] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.123648] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.123812] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.123947] mice: PS/2 mouse device common for all mice [ 1.124059] rtc_cmos 00:02: RTC can wake from S4 [ 1.124110] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.124149] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.124305] device-mapper: uevent: version 1.0.3 [ 1.124481] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.124644] device-mapper: multipath: version 1.1.0 loaded [ 1.124648] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.124920] cpuidle: using governor ladder [ 1.124923] cpuidle: using governor menu [ 1.125308] TCP cubic registered [ 1.125468] NET: Registered protocol family 10 [ 1.126250] NET: Registered protocol family 17 [ 1.126296] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00) [ 1.126307] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.126308] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.126424] PM: Resume from disk failed. [ 1.126439] registered taskstats version 1 [ 1.126786] Magic number: 0:794:629 [ 1.126902] rtc_cmos 00:02: setting system clock to 2012-02-29 10:37:16 UTC (1330511836) [ 1.126905] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.126907] EDD information not available. [ 1.126992] Freeing unused kernel memory: 884k freed [ 1.127571] Write protecting the kernel read-only data: 7716k [ 1.150108] udev: starting version 151 [ 1.278822] sata_nv 0000:00:08.0: version 3.5 [ 1.278844] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.278940] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.285909] scsi0 : sata_nv [ 1.290474] scsi1 : sata_nv [ 1.290725] ata1: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 23 [ 1.290728] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 23 [ 1.291021] pata_amd 0000:00:06.0: version 0.4.1 [ 1.291080] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.291183] scsi2 : pata_amd [ 1.291306] scsi3 : pata_amd [ 1.292211] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.292214] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.294185] FDC 0 is a post-1991 82077 [ 1.294200] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.294538] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 1.294544] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 1.294548] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.420020] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.470325] ata3.00: ATAPI: Optiarc DVD RW AD-7200A, 1.09, max UDMA/66 [ 1.470350] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11) [ 1.492757] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 1.512766] ata3.00: configured for UDMA/66 [ 1.780035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.802719] ata1.00: ATA-7: WDC WD800JD-00MSA1, 10.01E01, max UDMA/133 [ 1.802723] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.820233] ata1.00: configured for UDMA/133 [ 1.820357] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-00MS 10.0 PQ: 0 ANSI: 5 [ 1.820576] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.820719] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.820769] sd 0:0:0:0: [sda] Write Protect is off [ 1.820772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.820797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.820948] sda: [ 1.821836] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:18:f3:60:5f:66 [ 1.821841] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 1.821991] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 1.822061] sata_nv 0000:00:08.1: setting latency timer to 64 [ 1.822141] scsi4 : sata_nv [ 1.822269] scsi5 : sata_nv [ 1.822484] ata5: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb000 irq 22 [ 1.822487] ata6: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 22 [ 1.831038] sda1 sda2 < sda5 sda6 > [ 1.872561] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.972531] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 2.161325] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 2.170049] usb 3-1: device descriptor read/64, error -62 [ 2.312545] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.312630] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.332831] ata5.00: ATA-7: ST3250823AS, 3.04, max UDMA/133 [ 2.332835] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.360243] ata5.00: configured for UDMA/133 [ 2.360861] ata2.00: ATA-7: WDC WD1600AAJS-07PSA0, 05.06H05, max UDMA/133 [ 2.360864] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.380490] ata2.00: configured for UDMA/133 [ 2.380643] scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5 [ 2.380820] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.380850] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.380869] sd 1:0:0:0: [sdb] Write Protect is off [ 2.380872] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.380930] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.381189] sdb: [ 2.382536] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7200A 1.09 PQ: 0 ANSI: 5 [ 2.385762] sdb1 sdb2 [ 2.386110] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.387276] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.387280] Uniform CD-ROM driver Revision: 3.20 [ 2.387361] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.387426] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 2.387517] ata4: port disabled. ignoring. [ 2.387640] scsi 4:0:0:0: Direct-Access ATA ST3250823AS 3.04 PQ: 0 ANSI: 5 [ 2.387754] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.387769] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.387800] sd 4:0:0:0: [sdc] Write Protect is off [ 2.387803] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.387868] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.388090] sdc: sdc1 [ 2.407536] sd 4:0:0:0: [sdc] Attached SCSI disk [ 2.452527] usb 3-1: device descriptor read/64, error -62 [ 2.742544] usb 3-1: new low speed USB device using ohci_hcd and address 3 [ 2.872545] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.912746] ata6.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7 [ 2.912751] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.922528] usb 3-1: device descriptor read/64, error -62 [ 2.940245] ata6.00: configured for UDMA/133 [ 2.940405] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 2.940562] sd 5:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.940590] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 2.940611] sd 5:0:0:0: [sdd] Write Protect is off [ 2.940614] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.940650] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.940924] sdd: sdd1 [ 2.947708] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.220020] usb 3-1: device descriptor read/64, error -62 [ 3.520019] usb 3-1: new low speed USB device using ohci_hcd and address 4 [ 3.932522] usb 3-1: device not accepting address 4, error -62 [ 4.112527] usb 3-1: new low speed USB device using ohci_hcd and address 5 [ 4.530034] usb 3-1: device not accepting address 5, error -62 [ 4.530056] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 4.870021] usb 3-2: new full speed USB device using ohci_hcd and address 6 [ 5.085032] usb 3-2: not running at top speed; connect to a high speed hub [ 5.097158] usb 3-2: configuration #1 chosen from 1 choice [ 5.100062] hub 3-2:1.0: USB hub found [ 5.103030] hub 3-2:1.0: 4 ports detected [ 5.460025] usb 3-5: new full speed USB device using ohci_hcd and address 7 [ 5.640023] usb 3-5: device descriptor read/64, error -62 [ 5.930020] usb 3-5: device descriptor read/64, error -62 [ 6.220018] usb 3-5: new full speed USB device using ohci_hcd and address 8 [ 6.400021] usb 3-5: device descriptor read/64, error -62 [ 6.690020] usb 3-5: device descriptor read/64, error -62 [ 6.980022] usb 3-5: new full speed USB device using ohci_hcd and address 9 [ 7.402528] usb 3-5: device not accepting address 9, error -62 [ 7.580021] usb 3-5: new full speed USB device using ohci_hcd and address 10 [ 8.000030] usb 3-5: device not accepting address 10, error -62 [ 8.000049] hub 3-0:1.0: unable to enumerate USB device on port 5 [ 8.241033] usb 3-2.1: new low speed USB device using ohci_hcd and address 11 [ 8.382152] usb 3-2.1: configuration #1 chosen from 1 choice [ 8.471031] usb 3-2.2: new low speed USB device using ohci_hcd and address 12 [ 8.597158] usb 3-2.2: configuration #1 chosen from 1 choice [ 9.897103] Adding 9765880k swap on /dev/sda1. Priority:-1 extents:1 across:9765880k [ 9.910831] udev: starting version 151 [ 10.029238] EDAC MC: Ver: 2.1.0 Jan 4 2012 [ 10.029756] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.029778] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 10.038877] lp: driver loaded but no devices found [ 10.046661] vga16fb: initializing [ 10.046666] vga16fb: mapped to 0xffff8800000a0000 [ 10.046771] fb0: VGA16 VGA frame buffer device [ 10.075360] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.248668] EDAC amd64_edac: Ver: 3.2.0 Jan 4 2012 [ 10.262261] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 10.262274] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 10.262276] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 10.262277] (Note that use of the override may cause unknown side effects.) [ 10.262304] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 10.270786] usbcore: registered new interface driver hiddev [ 10.282351] type=1505 audit(1330511845.645:2): operation="profile_load" pid=625 name="/sbin/dhclient3" [ 10.282650] type=1505 audit(1330511845.655:3): operation="profile_load" pid=625 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.282832] type=1505 audit(1330511845.655:4): operation="profile_load" pid=625 name="/usr/lib/connman/scripts/dhclient-script" [ 10.284481] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input3 [ 10.284609] generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:02.0-2.1/input0 [ 10.309232] input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input4 [ 10.309371] generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:02.0-2.1/input1 [ 10.309479] usbcore: registered new interface driver usbhid [ 10.309483] usbhid: v2.6:USB HID core driver [ 10.680309] nvidia: module license 'NVIDIA' taints kernel. [ 10.680314] Disabling lock debugging due to kernel taint [ 11.095406] parport_pc 00:06: reported by Plug and Play ACPI [ 11.095454] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.343206] lp0: using parport0 (interrupt-driven). [ 11.366938] ppdev: user-space parallel port driver [ 11.381126] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input5 [ 11.381604] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-2.2/input0 [ 11.443852] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 16 [ 11.443859] alloc irq_desc for 16 on node 0 [ 11.443861] alloc kstat_irqs on node 0 [ 11.443873] nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 16 (level, low) -> IRQ 16 [ 11.443882] nvidia 0000:02:00.0: setting latency timer to 64 [ 11.443887] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 11.444220] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 11.493297] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 11.493304] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 11.493308] hda_intel: Disable MSI for Nvidia chipset [ 11.493375] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 11.503220] Console: switching to colour frame buffer device 80x30 [ 11.556403] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 11.556411] CA0106 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 11.556439] snd-ca0106: Model 1006 Rev 00000000 Serial 10061102 [ 11.645230] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 12.031745] type=1505 audit(1330511847.395:5): operation="profile_replace" pid=880 name="/sbin/dhclient3" [ 12.032062] type=1505 audit(1330511847.395:6): operation="profile_replace" pid=880 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.032242] type=1505 audit(1330511847.395:7): operation="profile_replace" pid=880 name="/usr/lib/connman/scripts/dhclient-script" [ 12.035081] type=1505 audit(1330511847.405:8): operation="profile_load" pid=879 name="/usr/share/gdm/guest-session/Xsession" [ 12.047648] type=1505 audit(1330511847.415:9): operation="profile_load" pid=881 name="/usr/bin/evince" [ 12.053209] type=1505 audit(1330511847.425:10): operation="profile_load" pid=881 name="/usr/bin/evince-previewer" [ 12.057597] type=1505 audit(1330511847.425:11): operation="profile_load" pid=881 name="/usr/bin/evince-thumbnailer" [ 12.149282] alloc irq_desc for 27 on node 0 [ 12.149286] alloc kstat_irqs on node 0 [ 12.149299] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X [ 12.918332] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input6 [ 22.970017] eth0: no IPv6 routers present [ 4508.680625] kjournald starting. Commit interval 5 seconds [ 4508.680655] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 4508.680918] EXT3 FS on sdd1, internal journal [ 4508.680924] EXT3-fs: mounted filesystem with ordered data mode.